diff options
Diffstat (limited to 'src/dev/storage/ide_wdcreg.h')
-rw-r--r-- | src/dev/storage/ide_wdcreg.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/src/dev/storage/ide_wdcreg.h b/src/dev/storage/ide_wdcreg.h new file mode 100644 index 000000000..f6a59c9f2 --- /dev/null +++ b/src/dev/storage/ide_wdcreg.h @@ -0,0 +1,197 @@ +/* $OpenBSD: wdcreg.h,v 1.13 2004/09/24 07:05:44 grange Exp $ */ +/* $NetBSD: wdcreg.h,v 1.22 1999/03/07 14:02:54 bouyer Exp $ */ + +/*- + * Copyright (c) 1991 The Regents of the University of California + * All rights reserved + * + * This code is derived from software contributed to Berkeley by + * William Jolitz. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)wdreg.h 7.1 (Berkeley) 5/9/91 + */ + +#ifndef _DEV_IC_WDCREG_H_ +#define _DEV_IC_WDCREG_H_ + +/* + * Controller register (wdr_ctlr) + */ +#define WDCTL_4BIT 0x08 /* use four head bits (wd1003) */ +#define WDCTL_RST 0x04 /* reset the controller */ +#define WDCTL_IDS 0x02 /* disable controller interrupts */ + +/* + * Status bits. + */ +#define WDCS_BSY 0x80 /* busy */ +#define WDCS_DRDY 0x40 /* drive ready */ +#define WDCS_DWF 0x20 /* drive write fault */ +#define WDCS_DSC 0x10 /* drive seek complete */ +#define WDCS_DRQ 0x08 /* data request */ +#define WDCS_CORR 0x04 /* corrected data */ +#define WDCS_IDX 0x02 /* index */ +#define WDCS_ERR 0x01 /* error */ +#define WDCS_BITS "\020\010BSY\007DRDY\006DWF\005DSC\004DRQ\003CORR\002IDX\001ERR" + +/* + * Error bits. + */ +#define WDCE_BBK 0x80 /* bad block detected */ +#define WDCE_CRC 0x80 /* CRC error (Ultra-DMA only) */ +#define WDCE_UNC 0x40 /* uncorrectable data error */ +#define WDCE_MC 0x20 /* media changed */ +#define WDCE_IDNF 0x10 /* id not found */ +#define WDCE_MCR 0x08 /* media change requested */ +#define WDCE_ABRT 0x04 /* aborted command */ +#define WDCE_TK0NF 0x02 /* track 0 not found */ +#define WDCE_AMNF 0x01 /* address mark not found */ + +/* + * Commands for Disk Controller. + */ +#define WDCC_NOP 0x00 /* NOP - Always fail with "aborted command" */ +#define WDCC_RECAL 0x10 /* disk restore code -- resets cntlr */ + +#define WDCC_READ 0x20 /* disk read code */ +#define WDCC_WRITE 0x30 /* disk write code */ +#define WDCC__LONG 0x02 /* modifier -- access ecc bytes */ +#define WDCC__NORETRY 0x01 /* modifier -- no retrys */ + +#define WDCC_FORMAT 0x50 /* disk format code */ +#define WDCC_DIAGNOSE 0x90 /* controller diagnostic */ +#define WDCC_IDP 0x91 /* initialize drive parameters */ + +#define WDCC_READMULTI 0xc4 /* read multiple */ +#define WDCC_WRITEMULTI 0xc5 /* write multiple */ +#define WDCC_SETMULTI 0xc6 /* set multiple mode */ + +#define WDCC_READDMA 0xc8 /* read with DMA */ +#define WDCC_WRITEDMA 0xca /* write with DMA */ + +#define WDCC_ACKMC 0xdb /* acknowledge media change */ +#define WDCC_LOCK 0xde /* lock drawer */ +#define WDCC_UNLOCK 0xdf /* unlock drawer */ + +#define WDCC_FLUSHCACHE 0xe7 /* Flush cache */ +#define WDCC_IDENTIFY 0xec /* read parameters from controller */ +#define SET_FEATURES 0xef /* set features */ + +#define WDCC_IDLE 0xe3 /* set idle timer & enter idle mode */ +#define WDCC_IDLE_IMMED 0xe1 /* enter idle mode */ +#define WDCC_SLEEP 0xe6 /* enter sleep mode */ +#define WDCC_STANDBY 0xe2 /* set standby timer & enter standby mode */ +#define WDCC_STANDBY_IMMED 0xe0 /* enter standby mode */ +#define WDCC_CHECK_PWR 0xe5 /* check power mode */ + +#define WDCC_READ_EXT 0x24 /* read 48-bit addressing */ +#define WDCC_WRITE_EXT 0x34 /* write 48-bit addressing */ + +#define WDCC_READMULTI_EXT 0x29 /* read multiple 48-bit addressing */ +#define WDCC_WRITEMULTI_EXT 0x39 /* write multiple 48-bit addressing */ + +#define WDCC_READDMA_EXT 0x25 /* read 48-bit addressing with DMA */ +#define WDCC_WRITEDMA_EXT 0x35 /* write 48-bit addressing with DMA */ + +#define WDCC_FLUSHCACHE_EXT 0xea /* 48-bit addressing flush cache */ + +/* Subcommands for SET_FEATURES (features register ) */ +#define WDSF_8BIT_PIO_EN 0x01 /* Enable 8bit PIO (CFA featureset) */ +#define WDSF_EN_WR_CACHE 0x02 +#define WDSF_SET_MODE 0x03 +#define WDSF_REASSIGN_EN 0x04 /* Obsolete in ATA-6 */ +#define WDSF_APM_EN 0x05 /* Enable Adv. Power Management */ +#define WDSF_PUIS_EN 0x06 /* Enable Power-Up In Standby */ +#define WDSF_PUIS_SPINUP 0x07 /* Power-Up In Standby spin-up */ +#define WDSF_CFA_MODE1_EN 0x0A /* Enable CFA power mode 1 */ +#define WDSF_RMSN_DS 0x31 /* Disable Removable Media Status */ +#define WDSF_RETRY_DS 0x33 /* Obsolete in ATA-6 */ +#define WDSF_AAM_EN 0x42 /* Enable Autom. Acoustic Management */ +#define WDSF_SET_CACHE_SGMT 0x54 /* Obsolete in ATA-6 */ +#define WDSF_READAHEAD_DS 0x55 /* Disable read look-ahead */ +#define WDSF_RLSE_EN 0x5D /* Enable release interrupt */ +#define WDSF_SRV_EN 0x5E /* Enable SERVICE interrupt */ +#define WDSF_POD_DS 0x66 +#define WDSF_ECC_DS 0x77 +#define WDSF_8BIT_PIO_DS 0x81 /* Disable 8bit PIO (CFA featureset) */ +#define WDSF_WRITE_CACHE_DS 0x82 +#define WDSF_REASSIGN_DS 0x84 +#define WDSF_APM_DS 0x85 /* Disable Adv. Power Management */ +#define WDSF_PUIS_DS 0x86 /* Disable Power-Up In Standby */ +#define WDSF_ECC_EN 0x88 +#define WDSF_CFA_MODE1_DS 0x8A /* Disable CFA power mode 1 */ +#define WDSF_RMSN_EN 0x95 /* Enable Removable Media Status */ +#define WDSF_RETRY_EN 0x99 /* Obsolete in ATA-6 */ +#define WDSF_SET_CURRENT 0x9A /* Obsolete in ATA-6 */ +#define WDSF_READAHEAD_EN 0xAA +#define WDSF_PREFETCH_SET 0xAB /* Obsolete in ATA-6 */ +#define WDSF_AAM_DS 0xC2 /* Disable Autom. Acoustic Management */ +#define WDSF_POD_EN 0xCC +#define WDSF_RLSE_DS 0xDD /* Disable release interrupt */ +#define WDSF_SRV_DS 0xDE /* Disable SERVICE interrupt */ +#define WDSF_READ_NATIVE_MAX 0xF8 +#define WDSF_SEEK 0x70 +#define WDSF_VERIFY 0x40 + +/* parameters uploaded to device/heads register */ +#define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */ +#define WDSD_CHS 0x00 /* cylinder/head/sector addressing */ +#define WDSD_LBA 0x40 /* logical block addressing */ + +/* Commands for ATAPI devices */ +#define ATAPI_CHECK_POWER_MODE 0xe5 +#define ATAPI_EXEC_DRIVE_DIAGS 0x90 +#define ATAPI_IDLE_IMMEDIATE 0xe1 +#define ATAPI_NOP 0x00 +#define ATAPI_PKT_CMD 0xa0 +#define ATAPI_IDENTIFY_DEVICE 0xa1 +#define ATAPI_SOFT_RESET 0x08 +#define ATAPI_DEVICE_RESET 0x08 /* ATA/ATAPI-5 name for soft reset */ +#define ATAPI_SLEEP 0xe6 +#define ATAPI_STANDBY_IMMEDIATE 0xe0 +#define ATAPI_SMART 0xB0 /* SMART operations */ +#define ATAPI_SETMAX 0xF9 /* Set Max Address */ +#define ATAPI_WRITEEXT 0x34 /* Write sectors Ext */ +#define ATAPI_SETMAXEXT 0x37 /* Set Max Address Ext */ +#define ATAPI_WRITEMULTIEXT 0x39 /* Write Multi Ext */ + +/* Bytes used by ATAPI_PACKET_COMMAND ( feature register) */ +#define ATAPI_PKT_CMD_FTRE_DMA 0x01 +#define ATAPI_PKT_CMD_FTRE_OVL 0x02 + +/* ireason */ +#define WDCI_CMD 0x01 /* command(1) or data(0) */ +#define WDCI_IN 0x02 /* transfer to(1) or from(0) the host */ +#define WDCI_RELEASE 0x04 /* bus released until completion */ + +#define PHASE_CMDOUT (WDCS_DRQ | WDCI_CMD) +#define PHASE_DATAIN (WDCS_DRQ | WDCI_IN) +#define PHASE_DATAOUT WDCS_DRQ +#define PHASE_COMPLETED (WDCI_IN | WDCI_CMD) +#define PHASE_ABORTED 0 + +#endif /* !_DEV_IC_WDCREG_H_ */ |