summaryrefslogtreecommitdiff
path: root/src/mem
diff options
context:
space:
mode:
Diffstat (limited to 'src/mem')
-rw-r--r--src/mem/DRAMCtrl.py10
-rw-r--r--src/mem/dram_ctrl.cc149
-rw-r--r--src/mem/dram_ctrl.hh25
3 files changed, 99 insertions, 85 deletions
diff --git a/src/mem/DRAMCtrl.py b/src/mem/DRAMCtrl.py
index 3145751cc..f78a7370d 100644
--- a/src/mem/DRAMCtrl.py
+++ b/src/mem/DRAMCtrl.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2012-2016 ARM Limited
+# Copyright (c) 2012-2018 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
@@ -45,6 +45,7 @@
# Erfan Azarkhish
from m5.params import *
+from m5.proxy import *
from AbstractMemory import *
# Enum for memory scheduling algorithms, currently First-Come
@@ -183,6 +184,13 @@ class DRAMCtrl(AbstractMemory):
# for CAS-to-CAS delay for bursts to different bank groups
tCCD_L = Param.Latency("0ns", "Same bank group CAS to CAS delay")
+ # Write-to-Write delay for bursts to the same bank group
+ # only utilized with bank group architectures; set to 0 for default case
+ # This will be used to enable different same bank group delays
+ # for writes versus reads
+ tCCD_L_WR = Param.Latency(Self.tCCD_L,
+ "Same bank group Write to Write delay")
+
# time taken to complete one refresh cycle (N rows in all banks)
tRFC = Param.Latency("Refresh cycle time")
diff --git a/src/mem/dram_ctrl.cc b/src/mem/dram_ctrl.cc
index 27e5a23ab..1a3eec48d 100644
--- a/src/mem/dram_ctrl.cc
+++ b/src/mem/dram_ctrl.cc
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2017 ARM Limited
+ * Copyright (c) 2010-2018 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
@@ -84,17 +84,19 @@ DRAMCtrl::DRAMCtrl(const DRAMCtrlParams* p) :
writeLowThreshold(writeBufferSize * p->write_low_thresh_perc / 100.0),
minWritesPerSwitch(p->min_writes_per_switch),
writesThisTime(0), readsThisTime(0),
- tCK(p->tCK), tWTR(p->tWTR), tRTW(p->tRTW), tCS(p->tCS), tBURST(p->tBURST),
+ tCK(p->tCK), tRTW(p->tRTW), tCS(p->tCS), tBURST(p->tBURST),
+ tCCD_L_WR(p->tCCD_L_WR),
tCCD_L(p->tCCD_L), tRCD(p->tRCD), tCL(p->tCL), tRP(p->tRP), tRAS(p->tRAS),
tWR(p->tWR), tRTP(p->tRTP), tRFC(p->tRFC), tREFI(p->tREFI), tRRD(p->tRRD),
tRRD_L(p->tRRD_L), tXAW(p->tXAW), tXP(p->tXP), tXS(p->tXS),
- activationLimit(p->activation_limit),
+ activationLimit(p->activation_limit), rankToRankDly(tCS + tBURST),
+ wrToRdDly(tCL + tBURST + p->tWTR), rdToWrDly(tRTW + tBURST),
memSchedPolicy(p->mem_sched_policy), addrMapping(p->addr_mapping),
pageMgmt(p->page_policy),
maxAccessesPerRow(p->max_accesses_per_row),
frontendLatency(p->static_frontend_latency),
backendLatency(p->static_backend_latency),
- busBusyUntil(0), prevArrival(0),
+ nextBurstAt(0), prevArrival(0),
nextReqTime(0), activeRank(0), timeStampOffset(0),
lastStatsResetTick(0)
{
@@ -164,6 +166,12 @@ DRAMCtrl::DRAMCtrl(const DRAMCtrlParams* p) :
"bank groups per rank (%d) is greater than 1\n",
tCCD_L, tBURST, bankGroupsPerRank);
}
+ // tCCD_L_WR should be greater than minimal, back-to-back burst delay
+ if (tCCD_L_WR <= tBURST) {
+ fatal("tCCD_L_WR (%d) should be larger than tBURST (%d) when "
+ "bank groups per rank (%d) is greater than 1\n",
+ tCCD_L_WR, tBURST, bankGroupsPerRank);
+ }
// tRRD_L is greater than minimal, same bank group ACT-to-ACT delay
// some datasheets might specify it equal to tRRD
if (tRRD_L < tRRD) {
@@ -247,7 +255,7 @@ DRAMCtrl::startup()
// have to worry about negative values when computing the time for
// the next request, this will add an insignificant bubble at the
// start of simulation
- busBusyUntil = curTick() + tRP + tRCD + tCL;
+ nextBurstAt = curTick() + tRP + tRCD;
}
}
@@ -773,7 +781,11 @@ bool
DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
{
// Only determine this if needed
- uint64_t earliest_banks = 0;
+ vector<uint32_t> earliest_banks(ranksPerChannel, 0);
+
+ // Has minBankPrep been called to populate earliest_banks?
+ bool filled_earliest_banks = false;
+ // can the PRE/ACT sequence be done without impacting utlization?
bool hidden_bank_prep = false;
// search for seamless row hits first, if no seamless row hit is
@@ -794,12 +806,13 @@ DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
auto selected_pkt_it = queue.end();
// time we need to issue a column command to be seamless
- const Tick min_col_at = std::max(busBusyUntil - tCL + extra_col_delay,
- curTick());
+ const Tick min_col_at = std::max(nextBurstAt + extra_col_delay, curTick());
for (auto i = queue.begin(); i != queue.end() ; ++i) {
DRAMPacket* dram_pkt = *i;
const Bank& bank = dram_pkt->bankRef;
+ const Tick col_allowed_at = dram_pkt->isRead ? bank.rdAllowedAt :
+ bank.wrAllowedAt;
// check if rank is not doing a refresh and thus is available, if not,
// jump to the next packet
@@ -809,7 +822,7 @@ DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
// no additional rank-to-rank or same bank-group
// delays, or we switched read/write and might as well
// go for the row hit
- if (bank.colAllowedAt <= min_col_at) {
+ if (col_allowed_at <= min_col_at) {
// FCFS within the hits, giving priority to
// commands that can issue seamlessly, without
// additional delay, such as same rank accesses
@@ -830,18 +843,18 @@ DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
} else if (!found_earliest_pkt) {
// if we have not initialised the bank status, do it
// now, and only once per scheduling decisions
- if (earliest_banks == 0) {
+ if (!filled_earliest_banks) {
// determine entries with earliest bank delay
- pair<uint64_t, bool> bankStatus =
+ std::tie(earliest_banks, hidden_bank_prep) =
minBankPrep(queue, min_col_at);
- earliest_banks = bankStatus.first;
- hidden_bank_prep = bankStatus.second;
+ filled_earliest_banks = true;
}
// bank is amongst first available banks
// minBankPrep will give priority to packets that can
// issue seamlessly
- if (bits(earliest_banks, dram_pkt->bankId, dram_pkt->bankId)) {
+ if (bits(earliest_banks[dram_pkt->rank],
+ dram_pkt->bank, dram_pkt->bank)) {
found_earliest_pkt = true;
found_hidden_bank = hidden_bank_prep;
@@ -937,8 +950,9 @@ DRAMCtrl::activateBank(Rank& rank_ref, Bank& bank_ref,
// The next access has to respect tRAS for this bank
bank_ref.preAllowedAt = act_tick + tRAS;
- // Respect the row-to-column command delay
- bank_ref.colAllowedAt = std::max(act_tick + tRCD, bank_ref.colAllowedAt);
+ // Respect the row-to-column command delay for both read and write cmds
+ bank_ref.rdAllowedAt = std::max(act_tick + tRCD, bank_ref.rdAllowedAt);
+ bank_ref.wrAllowedAt = std::max(act_tick + tRCD, bank_ref.wrAllowedAt);
// start by enforcing tRRD
for (int i = 0; i < banksPerRank; i++) {
@@ -1074,9 +1088,6 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
// for the state we need to track if it is a row hit or not
bool row_hit = true;
- // respect any constraints on the command (e.g. tRCD or tCCD)
- Tick cmd_at = std::max(bank.colAllowedAt, curTick());
-
// Determine the access latency and update the bank state
if (bank.openRow == dram_pkt->row) {
// nothing to do
@@ -1095,24 +1106,23 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
// Record the activation and deal with all the global timing
// constraints caused be a new activation (tRRD and tXAW)
activateBank(rank, bank, act_tick, dram_pkt->row);
-
- // issue the command as early as possible
- cmd_at = bank.colAllowedAt;
}
+ // respect any constraints on the command (e.g. tRCD or tCCD)
+ const Tick col_allowed_at = dram_pkt->isRead ?
+ bank.rdAllowedAt : bank.wrAllowedAt;
+
// we need to wait until the bus is available before we can issue
- // the command
- cmd_at = std::max(cmd_at, busBusyUntil - tCL);
+ // the command; need minimum of tBURST between commands
+ Tick cmd_at = std::max({col_allowed_at, nextBurstAt, curTick()});
// update the packet ready time
dram_pkt->readyTime = cmd_at + tCL + tBURST;
- // only one burst can use the bus at any one point in time
- assert(dram_pkt->readyTime - busBusyUntil >= tBURST);
-
// update the time for the next read/write burst for each
- // bank (add a max with tCCD/tCCD_L here)
- Tick cmd_dly;
+ // bank (add a max with tCCD/tCCD_L/tCCD_L_WR here)
+ Tick dly_to_rd_cmd;
+ Tick dly_to_wr_cmd;
for (int j = 0; j < ranksPerChannel; j++) {
for (int i = 0; i < banksPerRank; i++) {
// next burst to same bank group in this rank must not happen
@@ -1123,24 +1133,30 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
(bank.bankgr == ranks[j]->banks[i].bankgr)) {
// bank group architecture requires longer delays between
// RD/WR burst commands to the same bank group.
- // Use tCCD_L in this case
- cmd_dly = tCCD_L;
+ // tCCD_L is default requirement for same BG timing
+ // tCCD_L_WR is required for write-to-write
+ // Need to also take bus turnaround delays into account
+ dly_to_rd_cmd = dram_pkt->isRead ?
+ tCCD_L : std::max(tCCD_L, wrToRdDly);
+ dly_to_wr_cmd = dram_pkt->isRead ?
+ std::max(tCCD_L, rdToWrDly) : tCCD_L_WR;
} else {
- // use tBURST (equivalent to tCCD_S), the shorter
- // cas-to-cas delay value, when either:
- // 1) bank group architecture is not supportted
- // 2) bank is in a different bank group
- cmd_dly = tBURST;
+ // tBURST is default requirement for diff BG timing
+ // Need to also take bus turnaround delays into account
+ dly_to_rd_cmd = dram_pkt->isRead ? tBURST : wrToRdDly;
+ dly_to_wr_cmd = dram_pkt->isRead ? rdToWrDly : tBURST;
}
} else {
- // different rank is by default in a different bank group
- // use tBURST (equivalent to tCCD_S), which is the shorter
- // cas-to-cas delay in this case
- // Add tCS to account for rank-to-rank bus delay requirements
- cmd_dly = tBURST + tCS;
+ // different rank is by default in a different bank group and
+ // doesn't require longer tCCD or additional RTW, WTR delays
+ // Need to account for rank-to-rank switching with tCS
+ dly_to_wr_cmd = rankToRankDly;
+ dly_to_rd_cmd = rankToRankDly;
}
- ranks[j]->banks[i].colAllowedAt = std::max(cmd_at + cmd_dly,
- ranks[j]->banks[i].colAllowedAt);
+ ranks[j]->banks[i].rdAllowedAt = std::max(cmd_at + dly_to_rd_cmd,
+ ranks[j]->banks[i].rdAllowedAt);
+ ranks[j]->banks[i].wrAllowedAt = std::max(cmd_at + dly_to_wr_cmd,
+ ranks[j]->banks[i].wrAllowedAt);
}
}
@@ -1215,11 +1231,11 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
MemCommand::cmds command = (mem_cmd == "RD") ? MemCommand::RD :
MemCommand::WR;
- // Update bus state
- busBusyUntil = dram_pkt->readyTime;
+ // Update bus state to reflect when previous command was issued
+ nextBurstAt = cmd_at + tBURST;
- DPRINTF(DRAM, "Access to %lld, ready at %lld bus busy until %lld.\n",
- dram_pkt->addr, dram_pkt->readyTime, busBusyUntil);
+ DPRINTF(DRAM, "Access to %lld, ready at %lld next burst at %lld.\n",
+ dram_pkt->addr, dram_pkt->readyTime, nextBurstAt);
dram_pkt->rankRef.cmdList.push_back(Command(command, dram_pkt->bank,
cmd_at));
@@ -1241,7 +1257,7 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
// conservative estimate of when we have to schedule the next
// request to not introduce any unecessary bubbles. In most cases
// we will wake up sooner than we have to.
- nextReqTime = busBusyUntil - (tRP + tRCD + tCL);
+ nextReqTime = nextBurstAt - (tRP + tRCD);
// Update the stats and schedule the next request
if (dram_pkt->isRead) {
@@ -1374,8 +1390,7 @@ DRAMCtrl::processNextReqEvent()
// front of the read queue
// If we are changing command type, incorporate the minimum
// bus turnaround delay which will be tCS (different rank) case
- found_read = chooseNext(readQueue,
- switched_cmd_type ? tCS : 0);
+ found_read = chooseNext(readQueue, switched_cmd_type ? tCS : 0);
// if no read to an available rank is found then return
// at this point. There could be writes to the available ranks
@@ -1388,15 +1403,6 @@ DRAMCtrl::processNextReqEvent()
DRAMPacket* dram_pkt = readQueue.front();
assert(dram_pkt->rankRef.inRefIdleState());
- // here we get a bit creative and shift the bus busy time not
- // just the tWTR, but also a CAS latency to capture the fact
- // that we are allowed to prepare a new bank, but not issue a
- // read command until after tWTR, in essence we capture a
- // bubble on the data bus that is tWTR + tCL
- if (switched_cmd_type && dram_pkt->rank == activeRank) {
- busBusyUntil += tWTR + tCL;
- }
-
doDRAMAccess(dram_pkt);
// At this point we're done dealing with the request
@@ -1456,14 +1462,6 @@ DRAMCtrl::processNextReqEvent()
// sanity check
assert(dram_pkt->size <= burstSize);
- // add a bubble to the data bus, as defined by the
- // tRTW when access is to the same rank as previous burst
- // Different rank timing is handled with tCS, which is
- // applied to colAllowedAt
- if (switched_cmd_type && dram_pkt->rank == activeRank) {
- busBusyUntil += tRTW;
- }
-
doDRAMAccess(dram_pkt);
writeQueue.pop_front();
@@ -1522,12 +1520,12 @@ DRAMCtrl::processNextReqEvent()
}
}
-pair<uint64_t, bool>
+pair<vector<uint32_t>, bool>
DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue,
Tick min_col_at) const
{
- uint64_t bank_mask = 0;
Tick min_act_at = MaxTick;
+ vector<uint32_t> bank_mask(ranksPerChannel, 0);
// latest Tick for which ACT can occur without incurring additoinal
// delay on the data bus
@@ -1567,8 +1565,10 @@ DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue,
std::max(ranks[i]->banks[j].preAllowedAt, curTick()) + tRP;
// When is the earliest the R/W burst can issue?
- Tick col_at = std::max(ranks[i]->banks[j].colAllowedAt,
- act_at + tRCD);
+ const Tick col_allowed_at = (busState == READ) ?
+ ranks[i]->banks[j].rdAllowedAt :
+ ranks[i]->banks[j].wrAllowedAt;
+ Tick col_at = std::max(col_allowed_at, act_at + tRCD);
// bank can issue burst back-to-back (seamlessly) with
// previous burst
@@ -1586,7 +1586,7 @@ DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue,
// seen so far
if (!found_seamless_bank &&
(new_seamless_bank || act_at < min_act_at)) {
- bank_mask = 0;
+ std::fill(bank_mask.begin(), bank_mask.end(), 0);
}
found_seamless_bank |= new_seamless_bank;
@@ -1595,7 +1595,7 @@ DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue,
hidden_bank_prep = act_at <= hidden_act_max;
// set the bit corresponding to the available bank
- replaceBits(bank_mask, bank_id, bank_id, 1);
+ replaceBits(bank_mask[i], j, j, 1);
min_act_at = act_at;
}
}
@@ -2068,7 +2068,8 @@ DRAMCtrl::Rank::scheduleWakeUpEvent(Tick exit_delay)
// respect both causality and any existing bank
// constraints, some banks could already have a
// (auto) precharge scheduled
- b.colAllowedAt = std::max(wake_up_tick + exit_delay, b.colAllowedAt);
+ b.wrAllowedAt = std::max(wake_up_tick + exit_delay, b.wrAllowedAt);
+ b.rdAllowedAt = std::max(wake_up_tick + exit_delay, b.rdAllowedAt);
b.preAllowedAt = std::max(wake_up_tick + exit_delay, b.preAllowedAt);
b.actAllowedAt = std::max(wake_up_tick + exit_delay, b.actAllowedAt);
}
diff --git a/src/mem/dram_ctrl.hh b/src/mem/dram_ctrl.hh
index 592e58cd7..11a16edef 100644
--- a/src/mem/dram_ctrl.hh
+++ b/src/mem/dram_ctrl.hh
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2017 ARM Limited
+ * Copyright (c) 2012-2018 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
@@ -189,7 +189,8 @@ class DRAMCtrl : public AbstractMemory
uint8_t bank;
uint8_t bankgr;
- Tick colAllowedAt;
+ Tick rdAllowedAt;
+ Tick wrAllowedAt;
Tick preAllowedAt;
Tick actAllowedAt;
@@ -198,7 +199,7 @@ class DRAMCtrl : public AbstractMemory
Bank() :
openRow(NO_ROW), bank(0), bankgr(0),
- colAllowedAt(0), preAllowedAt(0), actAllowedAt(0),
+ rdAllowedAt(0), wrAllowedAt(0), preAllowedAt(0), actAllowedAt(0),
rowAccesses(0), bytesAccessed(0)
{ }
};
@@ -823,15 +824,16 @@ class DRAMCtrl : public AbstractMemory
/**
* Find which are the earliest banks ready to issue an activate
- * for the enqueued requests. Assumes maximum of 64 banks per DIMM
+ * for the enqueued requests. Assumes maximum of 32 banks per rank
* Also checks if the bank is already prepped.
*
* @param queue Queued requests to consider
- * @param time of seamless burst command
+ * @param min_col_at time of seamless burst command
* @return One-hot encoded mask of bank indices
* @return boolean indicating burst can issue seamlessly, with no gaps
*/
- std::pair<uint64_t, bool> minBankPrep(const std::deque<DRAMPacket*>& queue,
+ std::pair<std::vector<uint32_t>, bool> minBankPrep(
+ const std::deque<DRAMPacket*>& queue,
Tick min_col_at) const;
/**
@@ -939,10 +941,10 @@ class DRAMCtrl : public AbstractMemory
* values.
*/
const Tick M5_CLASS_VAR_USED tCK;
- const Tick tWTR;
const Tick tRTW;
const Tick tCS;
const Tick tBURST;
+ const Tick tCCD_L_WR;
const Tick tCCD_L;
const Tick tRCD;
const Tick tCL;
@@ -958,6 +960,9 @@ class DRAMCtrl : public AbstractMemory
const Tick tXP;
const Tick tXS;
const uint32_t activationLimit;
+ const Tick rankToRankDly;
+ const Tick wrToRdDly;
+ const Tick rdToWrDly;
/**
* Memory controller configuration initialized based on parameter
@@ -988,16 +993,16 @@ class DRAMCtrl : public AbstractMemory
const Tick backendLatency;
/**
- * Till when has the main data bus been spoken for already?
+ * Till when must we wait before issuing next RD/WR burst?
*/
- Tick busBusyUntil;
+ Tick nextBurstAt;
Tick prevArrival;
/**
* The soonest you have to start thinking about the next request
* is the longest access time that can occur before
- * busBusyUntil. Assuming you need to precharge, open a new row,
+ * nextBurstAt. Assuming you need to precharge, open a new row,
* and access, it is tRP + tRCD + tCL.
*/
Tick nextReqTime;