summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/arch/arm/ArmSystem.py4
-rw-r--r--src/arch/arm/isa.cc3
-rw-r--r--src/arch/arm/linux/system.cc4
-rw-r--r--src/arch/arm/linux/system.hh3
-rw-r--r--src/dev/arm/RealView.py103
-rw-r--r--src/dev/arm/rv_ctrl.cc2
6 files changed, 109 insertions, 10 deletions
diff --git a/src/arch/arm/ArmSystem.py b/src/arch/arm/ArmSystem.py
index a603567d3..e744c026c 100644
--- a/src/arch/arm/ArmSystem.py
+++ b/src/arch/arm/ArmSystem.py
@@ -43,7 +43,8 @@ class ArmMachineType(Enum):
map = {'RealView_EB' : 827,
'RealView_PBX' : 1901,
'VExpress_ELT' : 2272,
- 'VExpress_CA9' : 2272}
+ 'VExpress_CA9' : 2272,
+ 'VExpress_EMM' : 2272}
class ArmSystem(System):
type = 'ArmSystem'
@@ -65,5 +66,6 @@ class LinuxArmSystem(ArmSystem):
load_addr_mask = 0x0fffffff
machine_type = Param.ArmMachineType('RealView_PBX',
"Machine id from http://www.arm.linux.org.uk/developer/machines/")
+ atags_addr = Param.Addr(0x100, "Address where default atags structure should be written")
diff --git a/src/arch/arm/isa.cc b/src/arch/arm/isa.cc
index b79b9346f..9d76ca60e 100644
--- a/src/arch/arm/isa.cc
+++ b/src/arch/arm/isa.cc
@@ -213,8 +213,7 @@ ISA::readMiscReg(int misc_reg, ThreadContext *tc)
"config registers and jumping to ThumbEE vectors\n");
return 0x0031; // !ThumbEE | !Jazelle | Thumb | ARM
case MISCREG_ID_PFR1:
- warn("reading unimplmented register ID_PFR1");
- return 0;
+ return 0x00001; // !Timer | !Virti | !M Profile | !TrustZone | ARMv4
case MISCREG_CTR:
return 0x86468006; // V7, 64 byte cache line, load/exclusive is exact
case MISCREG_ACTLR:
diff --git a/src/arch/arm/linux/system.cc b/src/arch/arm/linux/system.cc
index a2d0c156c..4e18a265d 100644
--- a/src/arch/arm/linux/system.cc
+++ b/src/arch/arm/linux/system.cc
@@ -114,7 +114,7 @@ LinuxArmSystem::initState()
DPRINTF(Loader, "Boot atags was %d bytes in total\n", size << 2);
DDUMP(Loader, boot_data, size << 2);
- physProxy.writeBlob(ParamsList, boot_data, size << 2);
+ physProxy.writeBlob(params()->atags_addr, boot_data, size << 2);
#ifndef NDEBUG
kernelPanicEvent = addKernelFuncEvent<BreakPCEvent>("panic");
@@ -154,7 +154,7 @@ LinuxArmSystem::initState()
for (int i = 0; i < threadContexts.size(); i++) {
threadContexts[i]->setIntReg(0, 0);
threadContexts[i]->setIntReg(1, params()->machine_type);
- threadContexts[i]->setIntReg(2, ParamsList);
+ threadContexts[i]->setIntReg(2, params()->atags_addr);
}
}
diff --git a/src/arch/arm/linux/system.hh b/src/arch/arm/linux/system.hh
index 54681096b..caf018cb9 100644
--- a/src/arch/arm/linux/system.hh
+++ b/src/arch/arm/linux/system.hh
@@ -52,9 +52,6 @@
class LinuxArmSystem : public ArmSystem
{
- protected:
- static const int ParamsList = 0x100;
-
public:
/** Boilerplate params code */
typedef LinuxArmSystemParams Params;
diff --git a/src/dev/arm/RealView.py b/src/dev/arm/RealView.py
index 48a7cf316..98cb1694e 100644
--- a/src/dev/arm/RealView.py
+++ b/src/dev/arm/RealView.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2009-2011 ARM Limited
+# Copyright (c) 2009-2012 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
@@ -49,6 +49,7 @@ from Ide import *
from Platform import Platform
from Terminal import Terminal
from Uart import Uart
+from PhysicalMemory import *
class AmbaDevice(BasicPioDevice):
type = 'AmbaDevice'
@@ -119,6 +120,11 @@ class CpuLocalTimer(BasicPioDevice):
int_num_watchdog = Param.UInt32("Interrupt number for per-cpu watchdog to GIC")
clock = Param.Clock('1GHz', "Clock speed at which the timer counts")
+class PL031(AmbaIntDevice):
+ type = 'PL031'
+ time = Param.Time('01/01/2009', "System time to use ('Now' for actual time)")
+ amba_id = 0x00341031
+
class Pl050(AmbaIntDevice):
type = 'Pl050'
vnc = Param.VncServer(Parent.any, "Vnc server for remote frame buffer display")
@@ -136,6 +142,15 @@ class RealView(Platform):
type = 'RealView'
system = Param.System(Parent.any, "system")
pci_cfg_base = Param.Addr(0, "Base address of PCI Configuraiton Space")
+ mem_start_addr = Param.Addr(0, "Start address of main memory")
+ max_mem_size = Param.Addr('256MB', "Maximum amount of RAM supported by platform")
+
+ def setupBootLoader(self, mem_bus, cur_sys, loc):
+ self.nvmem = PhysicalMemory(range = AddrRange(Addr('2GB'), size = '64MB'), zero = True)
+ self.nvmem.port = mem_bus.master
+ cur_sys.boot_loader = loc('boot.arm')
+ cur_sys.boot_loader_mem = self.nvmem
+
# Reference for memory map and interrupt number
# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A)
@@ -189,7 +204,9 @@ class RealViewPBX(RealView):
# (gic, l2x0, a9scu, local_cpu_timer)
bridge.ranges = [AddrRange(self.realview_io.pio_addr,
self.a9scu.pio_addr - 1),
- AddrRange(self.flash_fake.pio_addr, Addr.max)]
+ AddrRange(self.flash_fake.pio_addr,
+ self.flash_fake.pio_addr + \
+ self.flash_fake.pio_size - 1)]
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
@@ -300,6 +317,7 @@ class RealViewEB(RealView):
self.smcreg_fake.pio = bus.master
class VExpress_ELT(RealView):
+ max_mem_size = '2GB'
pci_cfg_base = 0xD0000000
elba_uart = Pl011(pio_addr=0xE0009000, int_num=42)
uart = Pl011(pio_addr=0xFF009000, int_num=121)
@@ -402,3 +420,84 @@ class VExpress_ELT(RealView):
self.lan_fake.pio = bus.master
self.usb_fake.pio = bus.master
+
+class VExpress_EMM(RealView):
+ mem_start_addr = '2GB'
+ max_mem_size = '2GB'
+ uart = Pl011(pio_addr=0x1c090000, int_num=37)
+ realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000, pio_addr=0x1C010000)
+ gic = Gic(dist_addr=0x2C001000, cpu_addr=0x2C002000)
+ local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0x2C080000)
+ timer0 = Sp804(int_num0=34, int_num1=34, pio_addr=0x1C110000, clock0='50MHz', clock1='50MHz')
+ timer1 = Sp804(int_num0=35, int_num1=35, pio_addr=0x1C120000, clock0='50MHz', clock1='50MHz')
+ clcd = Pl111(pio_addr=0x1c1f0000, int_num=46)
+ kmi0 = Pl050(pio_addr=0x1c060000, int_num=44)
+ kmi1 = Pl050(pio_addr=0x1c070000, int_num=45)
+ cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2,
+ io_shift = 2, ctrl_offset = 2, Command = 0x1,
+ BAR0 = 0x1C1A0000, BAR0Size = '256B',
+ BAR1 = 0x1C1A0100, BAR1Size = '4096B',
+ BAR0LegacyIO = True, BAR1LegacyIO = True)
+ vram = PhysicalMemory(range = AddrRange(0x18000000, size='32MB'), zero = True)
+ rtc = PL031(pio_addr=0x1C170000, int_num=36)
+
+ l2x0_fake = IsaFake(pio_addr=0x2C100000, pio_size=0xfff)
+ uart1_fake = AmbaFake(pio_addr=0x1C0A0000)
+ uart2_fake = AmbaFake(pio_addr=0x1C0B0000)
+ uart3_fake = AmbaFake(pio_addr=0x1C0C0000)
+ sp810_fake = AmbaFake(pio_addr=0x1C020000, ignore_access=True)
+ watchdog_fake = AmbaFake(pio_addr=0x1C0F0000)
+ aaci_fake = AmbaFake(pio_addr=0x1C040000)
+ lan_fake = IsaFake(pio_addr=0x1A000000, pio_size=0xffff)
+ usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff)
+ mmc_fake = AmbaFake(pio_addr=0x1c050000)
+
+ def setupBootLoader(self, mem_bus, cur_sys, loc):
+ self.nvmem = PhysicalMemory(range = AddrRange(0, size = '64MB'), zero = True)
+ self.nvmem.port = mem_bus.master
+ cur_sys.boot_loader = loc('boot_emm.arm')
+ cur_sys.boot_loader_mem = self.nvmem
+ cur_sys.atags_addr = 0x80000100
+
+ # Attach I/O devices that are on chip and also set the appropriate
+ # ranges for the bridge
+ def attachOnChipIO(self, bus, bridge):
+ self.gic.pio = bus.master
+ self.local_cpu_timer.pio = bus.master
+ # Bridge ranges based on excluding what is part of on-chip I/O
+ # (gic, a9scu)
+ bridge.ranges = [AddrRange(0x2F000000, size='16MB'),
+ AddrRange(0x30000000, size='256MB'),
+ AddrRange(0x40000000, size='512MB'),
+ AddrRange(0x18000000, size='64MB'),
+ AddrRange(0x1C000000, size='64MB')]
+
+ # Attach I/O devices to specified bus object. Can't do this
+ # earlier, since the bus object itself is typically defined at the
+ # System level.
+ def attachIO(self, bus):
+ self.uart.pio = bus.master
+ self.realview_io.pio = bus.master
+ self.timer0.pio = bus.master
+ self.timer1.pio = bus.master
+ self.clcd.pio = bus.master
+ self.clcd.dma = bus.slave
+ self.kmi0.pio = bus.master
+ self.kmi1.pio = bus.master
+ self.cf_ctrl.pio = bus.master
+ self.cf_ctrl.config = bus.master
+ self.rtc.pio = bus.master
+ bus.use_default_range = True
+ self.vram.port = bus.master
+
+ self.l2x0_fake.pio = bus.master
+ self.uart1_fake.pio = bus.master
+ self.uart2_fake.pio = bus.master
+ self.uart3_fake.pio = bus.master
+ self.sp810_fake.pio = bus.master
+ self.watchdog_fake.pio = bus.master
+ self.aaci_fake.pio = bus.master
+ self.lan_fake.pio = bus.master
+ self.usb_fake.pio = bus.master
+ self.mmc_fake.pio = bus.master
+
diff --git a/src/dev/arm/rv_ctrl.cc b/src/dev/arm/rv_ctrl.cc
index 82710c730..eceba81f1 100644
--- a/src/dev/arm/rv_ctrl.cc
+++ b/src/dev/arm/rv_ctrl.cc
@@ -103,6 +103,8 @@ RealViewCtrl::read(PacketPtr pkt)
case IdReg:
pkt->set<uint32_t>(params()->idreg);
break;
+ case CfgStat:
+ pkt->set<uint32_t>(1);
default:
warn("Tried to read RealView I/O at offset %#x that doesn't exist\n",
daddr);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 02:00:25 +0000