diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/mem/DRAMCtrl.py | 44 | ||||
-rw-r--r-- | src/mem/dram_ctrl.cc | 180 | ||||
-rw-r--r-- | src/mem/dram_ctrl.hh | 25 |
3 files changed, 180 insertions, 69 deletions
diff --git a/src/mem/DRAMCtrl.py b/src/mem/DRAMCtrl.py index 8c573ca3a..b06b8e7eb 100644 --- a/src/mem/DRAMCtrl.py +++ b/src/mem/DRAMCtrl.py @@ -156,11 +156,17 @@ class DRAMCtrl(AbstractMemory): # to be sent. It is 7.8 us for a 64ms refresh requirement tREFI = Param.Latency("Refresh command interval") - # write-to-read turn around penalty - tWTR = Param.Latency("Write to read switching time") + # write-to-read, same rank turnaround penalty + tWTR = Param.Latency("Write to read, same rank switching time") - # read-to-write turn around penalty, bus turnaround delay - tRTW = Param.Latency("Read to write switching time") + # read-to-write, same rank turnaround penalty + tRTW = Param.Latency("Read to write, same rank switching time") + + # rank-to-rank bus delay penalty + # this does not correlate to a memory timing parameter and encompasses: + # 1) RD-to-RD, 2) WR-to-WR, 3) RD-to-WR, and 4) WR-to-RD + # different rank bus delay + tCS = Param.Latency("Rank to rank switching time") # minimum row activate to row activate delay time tRRD = Param.Latency("ACT to ACT delay") @@ -221,9 +227,12 @@ class DDR3_1600_x64(DRAMCtrl): # Greater of 4 CK or 7.5 ns tRTP = '7.5ns' - # Default read-to-write bus around to 2 CK, @800 MHz = 2.5 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @800 MHz = 2.5 ns tRTW = '2.5ns' + # Default different rank bus delay to 2 CK, @800 MHz = 2.5 ns + tCS = '2.5ns' + # <=85C, half for >85C tREFI = '7.8us' @@ -296,9 +305,12 @@ class DDR4_2400_x64(DRAMCtrl): # Greater of 4 CK or 7.5 ns tRTP = '7.5ns' - # Default read-to-write bus around to 2 CK, @1200 MHz = 1.666 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @1200 MHz = 1.666 ns tRTW = '1.666ns' + # Default different rank bus delay to 2 CK, @1200 MHz = 1.666 ns + tCS = '1.666ns' + # <=85C, half for >85C tREFI = '7.8us' @@ -353,9 +365,12 @@ class DDR3_1333_x64_DRAMSim2(DRAMCtrl): # Greater of 4 CK or 7.5 ns, 4 CK @ 666.66 MHz = 6 ns tWTR = '7.5ns' - # Default read-to-write bus around to 2 CK, @666.66 MHz = 3 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @666.66 MHz = 3 ns tRTW = '3ns' + # Default different rank bus delay to 2 CK, @666.66 MHz = 3 ns + tCS = '3ns' + tRRD = '6.0ns' tXAW = '30ns' @@ -416,9 +431,12 @@ class LPDDR2_S4_1066_x32(DRAMCtrl): # Irrespective of speed grade, tWTR is 7.5 ns tWTR = '7.5ns' - # Default read-to-write bus around to 2 CK, @533 MHz = 3.75 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @533 MHz = 3.75 ns tRTW = '3.75ns' + # Default different rank bus delay to 2 CK, @533 MHz = 3.75 ns + tCS = '3.75ns' + # Activate to activate irrespective of density and speed grade tRRD = '10.0ns' @@ -473,9 +491,12 @@ class WideIO_200_x128(DRAMCtrl): # Greater of 2 CK or 15 ns, 2 CK @ 200 MHz = 10 ns tWTR = '15ns' - # Default read-to-write bus around to 2 CK, @200 MHz = 10 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @200 MHz = 10 ns tRTW = '10ns' + # Default different rank bus delay to 2 CK, @200 MHz = 10 ns + tCS = '10ns' + # Activate to activate irrespective of density and speed grade tRRD = '10.0ns' @@ -536,9 +557,12 @@ class LPDDR3_1600_x32(DRAMCtrl): # Irrespective of speed grade, tWTR is 7.5 ns tWTR = '7.5ns' - # Default read-to-write bus around to 2 CK, @800 MHz = 2.5 ns + # Default same rank rd-to-wr bus turnaround to 2 CK, @800 MHz = 2.5 ns tRTW = '2.5ns' + # Default different rank bus delay to 2 CK, @800 MHz = 2.5 ns + tCS = '2.5ns' + # Activate to activate irrespective of density and speed grade tRRD = '10.0ns' diff --git a/src/mem/dram_ctrl.cc b/src/mem/dram_ctrl.cc index 1d96e274c..ca562f4f7 100644 --- a/src/mem/dram_ctrl.cc +++ b/src/mem/dram_ctrl.cc @@ -76,7 +76,7 @@ DRAMCtrl::DRAMCtrl(const DRAMCtrlParams* p) : writeLowThreshold(writeBufferSize * p->write_low_thresh_perc / 100.0), minWritesPerSwitch(p->min_writes_per_switch), writesThisTime(0), readsThisTime(0), - tCK(p->tCK), tWTR(p->tWTR), tRTW(p->tRTW), tBURST(p->tBURST), + tCK(p->tCK), tWTR(p->tWTR), tRTW(p->tRTW), tCS(p->tCS), tBURST(p->tBURST), tRCD(p->tRCD), tCL(p->tCL), tRP(p->tRP), tRAS(p->tRAS), tWR(p->tWR), tRTP(p->tRTP), tRFC(p->tRFC), tREFI(p->tREFI), tRRD(p->tRRD), tXAW(p->tXAW), activationLimit(p->activation_limit), @@ -87,7 +87,8 @@ DRAMCtrl::DRAMCtrl(const DRAMCtrlParams* p) : backendLatency(p->static_backend_latency), busBusyUntil(0), refreshDueAt(0), refreshState(REF_IDLE), pwrStateTrans(PWR_IDLE), pwrState(PWR_IDLE), prevArrival(0), - nextReqTime(0), pwrStateTick(0), numBanksActive(0) + nextReqTime(0), pwrStateTick(0), numBanksActive(0), + activeRank(0) { // create the bank states based on the dimensions of the ranks and // banks @@ -683,7 +684,7 @@ DRAMCtrl::processRespondEvent() } void -DRAMCtrl::chooseNext(std::deque<DRAMPacket*>& queue) +DRAMCtrl::chooseNext(std::deque<DRAMPacket*>& queue, bool switched_cmd_type) { // This method does the arbitration between requests. The chosen // packet is simply moved to the head of the queue. The other @@ -699,13 +700,13 @@ DRAMCtrl::chooseNext(std::deque<DRAMPacket*>& queue) if (memSchedPolicy == Enums::fcfs) { // Do nothing, since the correct request is already head } else if (memSchedPolicy == Enums::frfcfs) { - reorderQueue(queue); + reorderQueue(queue, switched_cmd_type); } else panic("No scheduling policy chosen\n"); } void -DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue) +DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, bool switched_cmd_type) { // Only determine this when needed uint64_t earliest_banks = 0; @@ -713,6 +714,7 @@ DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue) // Search for row hits first, if no row hit is found then schedule the // packet to one of the earliest banks available bool found_earliest_pkt = false; + bool found_prepped_diff_rank_pkt = false; auto selected_pkt_it = queue.begin(); for (auto i = queue.begin(); i != queue.end() ; ++i) { @@ -720,25 +722,30 @@ DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue) const Bank& bank = dram_pkt->bankRef; // Check if it is a row hit if (bank.openRow == dram_pkt->row) { - // FCFS within the hits - DPRINTF(DRAM, "Row buffer hit\n"); - selected_pkt_it = i; - break; - } else if (!found_earliest_pkt) { - // No row hit, go for first ready + if (dram_pkt->rank == activeRank || switched_cmd_type) { + // FCFS within the hits, giving priority to commands + // that access the same rank as the previous burst + // to minimize bus turnaround delays + // Only give rank prioity when command type is not changing + DPRINTF(DRAM, "Row buffer hit\n"); + selected_pkt_it = i; + break; + } else if (!found_prepped_diff_rank_pkt) { + // found row hit for command on different rank than prev burst + selected_pkt_it = i; + found_prepped_diff_rank_pkt = true; + } + } else if (!found_earliest_pkt & !found_prepped_diff_rank_pkt) { + // No row hit and + // haven't found an entry with a row hit to a new rank if (earliest_banks == 0) - earliest_banks = minBankActAt(queue); - - // simplistic approximation of when the bank can issue an - // activate, this is calculated in minBankActAt and could - // be cached - Tick act_at = bank.openRow == Bank::NO_ROW ? - bank.actAllowedAt : - std::max(bank.preAllowedAt, curTick()) + tRP; - - // Bank is ready or is the first available bank - if (act_at <= curTick() || - bits(earliest_banks, dram_pkt->bankId, dram_pkt->bankId)) { + // Determine entries with earliest bank prep delay + // Function will give priority to commands that access the + // same rank as previous burst and can prep the bank seamlessly + earliest_banks = minBankPrep(queue, switched_cmd_type); + + // FCFS - Bank is first available bank + if (bits(earliest_banks, dram_pkt->bankId, dram_pkt->bankId)) { // Remember the packet to be scheduled to one of the earliest // banks available, FCFS amongst the earliest banks selected_pkt_it = i; @@ -983,6 +990,9 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt) // read/write (add a max with tCCD here) bank.colAllowedAt = cmd_at + tBURST; + // Save rank of current access + activeRank = dram_pkt->rank; + // If this is a write, we also need to respect the write recovery // time before a precharge, in the case of a read, respect the // read to precharge constraint @@ -1095,6 +1105,9 @@ DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt) void DRAMCtrl::processNextReqEvent() { + // pre-emptively set to false. Overwrite if in READ_TO_WRITE + // or WRITE_TO_READ state + bool switched_cmd_type = false; if (busState == READ_TO_WRITE) { DPRINTF(DRAM, "Switching to writes after %d reads with %d reads " "waiting\n", readsThisTime, readQueue.size()); @@ -1106,6 +1119,7 @@ DRAMCtrl::processNextReqEvent() // now proceed to do the actual writes busState = WRITE; + switched_cmd_type = true; } else if (busState == WRITE_TO_READ) { DPRINTF(DRAM, "Switching to reads after %d writes with %d writes " "waiting\n", writesThisTime, writeQueue.size()); @@ -1114,6 +1128,7 @@ DRAMCtrl::processNextReqEvent() writesThisTime = 0; busState = READ; + switched_cmd_type = true; } if (refreshState != REF_IDLE) { @@ -1160,10 +1175,26 @@ DRAMCtrl::processNextReqEvent() } else { // Figure out which read request goes next, and move it to the // front of the read queue - chooseNext(readQueue); + chooseNext(readQueue, switched_cmd_type); DRAMPacket* dram_pkt = readQueue.front(); + // here we get a bit creative and shift the bus busy time not + // just the tWTR, but also a CAS latency to capture the fact + // that we are allowed to prepare a new bank, but not issue a + // read command until after tWTR, in essence we capture a + // bubble on the data bus that is tWTR + tCL + if (switched_cmd_type) { + // add a bubble to the data bus for write-to-read turn around + // or tCS (different rank bus delay). + busBusyUntil += (dram_pkt->rank == activeRank) ? tWTR + tCL : + tCS; + } else if (dram_pkt->rank != activeRank) { + // add a bubble to the data bus, as defined by the + // tCS parameter for rank-to-rank delay + busBusyUntil += tCS; + } + doDRAMAccess(dram_pkt); // At this point we're done dealing with the request @@ -1197,21 +1228,23 @@ DRAMCtrl::processNextReqEvent() if (switch_to_writes) { // transition to writing busState = READ_TO_WRITE; - - // add a bubble to the data bus, as defined by the - // tRTW parameter - busBusyUntil += tRTW; - - // update the minimum timing between the requests, - // this shifts us back in time far enough to do any - // bank preparation - nextReqTime = busBusyUntil - (tRP + tRCD + tCL); } } else { - chooseNext(writeQueue); + chooseNext(writeQueue, switched_cmd_type); DRAMPacket* dram_pkt = writeQueue.front(); // sanity check assert(dram_pkt->size <= burstSize); + + if (switched_cmd_type) { + // add a bubble to the data bus, as defined by the + // tRTW or tCS parameter, depending on whether changing ranks + busBusyUntil += (dram_pkt->rank == activeRank) ? tRTW : tCS; + } else if (dram_pkt->rank != activeRank) { + // add a bubble to the data bus, as defined by the + // tCS parameter for rank-to-rank delay + busBusyUntil += tCS; + } + doDRAMAccess(dram_pkt); writeQueue.pop_front(); @@ -1232,17 +1265,6 @@ DRAMCtrl::processNextReqEvent() // case, which eventually will check for any draining and // also pause any further scheduling if there is really // nothing to do - - // here we get a bit creative and shift the bus busy time not - // just the tWTR, but also a CAS latency to capture the fact - // that we are allowed to prepare a new bank, but not issue a - // read command until after tWTR, in essence we capture a - // bubble on the data bus that is tWTR + tCL - busBusyUntil += tWTR + tCL; - - // update the minimum timing between the requests, this shifts - // us back in time far enough to do any bank preparation - nextReqTime = busBusyUntil - (tRP + tRCD + tCL); } } @@ -1259,12 +1281,19 @@ DRAMCtrl::processNextReqEvent() } uint64_t -DRAMCtrl::minBankActAt(const deque<DRAMPacket*>& queue) const +DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue, + bool switched_cmd_type) const { uint64_t bank_mask = 0; Tick min_act_at = MaxTick; - // deterimne if we have queued transactions targetting a + uint64_t bank_mask_same_rank = 0; + Tick min_act_at_same_rank = MaxTick; + + // Give precedence to commands that access same rank as previous command + bool same_rank_match = false; + + // determine if we have queued transactions targetting the // bank in question vector<bool> got_waiting(ranksPerChannel * banksPerRank, false); for (auto p = queue.begin(); p != queue.end(); ++p) { @@ -1280,23 +1309,64 @@ DRAMCtrl::minBankActAt(const deque<DRAMPacket*>& queue) const if (got_waiting[bank_id]) { // simplistic approximation of when the bank can issue // an activate, ignoring any rank-to-rank switching - // cost + // cost in this calculation Tick act_at = banks[i][j].openRow == Bank::NO_ROW ? banks[i][j].actAllowedAt : std::max(banks[i][j].preAllowedAt, curTick()) + tRP; - if (act_at <= min_act_at) { - // reset bank mask if new minimum is found - if (act_at < min_act_at) - bank_mask = 0; - // set the bit corresponding to the available bank - replaceBits(bank_mask, bank_id, bank_id, 1); - min_act_at = act_at; + // prioritize commands that access the + // same rank as previous burst + // Calculate bank mask separately for the case and + // evaluate after loop iterations complete + if (i == activeRank && ranksPerChannel > 1) { + if (act_at <= min_act_at_same_rank) { + // reset same rank bank mask if new minimum is found + // and previous minimum could not immediately send ACT + if (act_at < min_act_at_same_rank && + min_act_at_same_rank > curTick()) + bank_mask_same_rank = 0; + + // Set flag indicating that a same rank + // opportunity was found + same_rank_match = true; + + // set the bit corresponding to the available bank + replaceBits(bank_mask_same_rank, bank_id, bank_id, 1); + min_act_at_same_rank = act_at; + } + } else { + if (act_at <= min_act_at) { + // reset bank mask if new minimum is found + // and either previous minimum could not immediately send ACT + if (act_at < min_act_at && min_act_at > curTick()) + bank_mask = 0; + // set the bit corresponding to the available bank + replaceBits(bank_mask, bank_id, bank_id, 1); + min_act_at = act_at; + } } } } } + // Determine the earliest time when the next burst can issue based + // on the current busBusyUntil delay. + // Offset by tRCD to correlate with ACT timing variables + Tick min_cmd_at = busBusyUntil - tCL - tRCD; + + // Prioritize same rank accesses that can issue B2B + // Only optimize for same ranks when the command type + // does not change; do not want to unnecessarily incur tWTR + // + // Resulting FCFS prioritization Order is: + // 1) Commands that access the same rank as previous burst + // and can prep the bank seamlessly. + // 2) Commands (any rank) with earliest bank prep + if (!switched_cmd_type && same_rank_match && + min_act_at_same_rank <= min_cmd_at) { + bank_mask = bank_mask_same_rank; + } + return bank_mask; } diff --git a/src/mem/dram_ctrl.hh b/src/mem/dram_ctrl.hh index ef8b47a2e..8dcbe817b 100644 --- a/src/mem/dram_ctrl.hh +++ b/src/mem/dram_ctrl.hh @@ -368,23 +368,36 @@ class DRAMCtrl : public AbstractMemory * The memory schduler/arbiter - picks which request needs to * go next, based on the specified policy such as FCFS or FR-FCFS * and moves it to the head of the queue. + * Prioritizes accesses to the same rank as previous burst unless + * controller is switching command type. + * + * @param queue Queued requests to consider + * @param switched_cmd_type Command type is changing */ - void chooseNext(std::deque<DRAMPacket*>& queue); + void chooseNext(std::deque<DRAMPacket*>& queue, bool switched_cmd_type); /** * For FR-FCFS policy reorder the read/write queue depending on row buffer * hits and earliest banks available in DRAM + * Prioritizes accesses to the same rank as previous burst unless + * controller is switching command type. + * + * @param queue Queued requests to consider + * @param switched_cmd_type Command type is changing */ - void reorderQueue(std::deque<DRAMPacket*>& queue); + void reorderQueue(std::deque<DRAMPacket*>& queue, bool switched_cmd_type); /** * Find which are the earliest banks ready to issue an activate * for the enqueued requests. Assumes maximum of 64 banks per DIMM + * Also checks if the bank is already prepped. * - * @param Queued requests to consider + * @param queue Queued requests to consider + * @param switched_cmd_type Command type is changing * @return One-hot encoded mask of bank indices */ - uint64_t minBankActAt(const std::deque<DRAMPacket*>& queue) const; + uint64_t minBankPrep(const std::deque<DRAMPacket*>& queue, + bool switched_cmd_type) const; /** * Keep track of when row activations happen, in order to enforce @@ -475,6 +488,7 @@ class DRAMCtrl : public AbstractMemory const Tick M5_CLASS_VAR_USED tCK; const Tick tWTR; const Tick tRTW; + const Tick tCS; const Tick tBURST; const Tick tRCD; const Tick tCL; @@ -664,6 +678,9 @@ class DRAMCtrl : public AbstractMemory // To track number of banks which are currently active unsigned int numBanksActive; + // Holds the value of the rank of burst issued + uint8_t activeRank; + /** @todo this is a temporary workaround until the 4-phase code is * committed. upstream caches needs this packet until true is returned, so * hold onto it for deletion until a subsequent call |