summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/dev/SConscript2
-rw-r--r--src/dev/Serial.py44
-rw-r--r--src/dev/Terminal.py3
-rw-r--r--src/dev/Uart.py3
-rw-r--r--src/dev/alpha/backdoor.cc2
-rw-r--r--src/dev/arm/pl011.cc13
-rw-r--r--src/dev/serial.cc73
-rw-r--r--src/dev/serial.hh143
-rw-r--r--src/dev/terminal.cc24
-rw-r--r--src/dev/terminal.hh33
-rw-r--r--src/dev/uart.cc9
-rw-r--r--src/dev/uart.hh5
-rw-r--r--src/dev/uart8250.cc13
-rw-r--r--src/dev/virtio/VirtIOConsole.py3
-rw-r--r--src/dev/virtio/console.cc12
-rw-r--r--src/dev/virtio/console.hh4
16 files changed, 309 insertions, 77 deletions
diff --git a/src/dev/SConscript b/src/dev/SConscript
index 9cfda0544..b95d3606c 100644
--- a/src/dev/SConscript
+++ b/src/dev/SConscript
@@ -44,6 +44,7 @@ if env['TARGET_ISA'] == 'null':
SimObject('BadDevice.py')
SimObject('Platform.py')
+SimObject('Serial.py')
SimObject('Terminal.py')
SimObject('Uart.py')
@@ -53,6 +54,7 @@ Source('mc146818.cc')
Source('pixelpump.cc')
Source('platform.cc')
Source('ps2.cc')
+Source('serial.cc')
Source('terminal.cc')
Source('uart.cc')
Source('uart8250.cc')
diff --git a/src/dev/Serial.py b/src/dev/Serial.py
new file mode 100644
index 000000000..bbc792b67
--- /dev/null
+++ b/src/dev/Serial.py
@@ -0,0 +1,44 @@
+# Copyright (c) 2014, 2017 ARM Limited
+# All rights reserved.
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder. You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Andreas Sandberg
+
+from m5.params import *
+from m5.SimObject import SimObject
+
+class SerialDevice(SimObject):
+ type = 'SerialDevice'
+ abstract = True
+ cxx_header = "dev/serial.hh"
diff --git a/src/dev/Terminal.py b/src/dev/Terminal.py
index 2b54f9d5e..9b50111cd 100644
--- a/src/dev/Terminal.py
+++ b/src/dev/Terminal.py
@@ -29,8 +29,9 @@
from m5.SimObject import SimObject
from m5.params import *
from m5.proxy import *
+from Serial import SerialDevice
-class Terminal(SimObject):
+class Terminal(SerialDevice):
type = 'Terminal'
cxx_header = "dev/terminal.hh"
intr_control = Param.IntrControl(Parent.any, "interrupt controller")
diff --git a/src/dev/Uart.py b/src/dev/Uart.py
index c3bc9dd0f..c3bfd1bc2 100644
--- a/src/dev/Uart.py
+++ b/src/dev/Uart.py
@@ -29,13 +29,14 @@
from m5.params import *
from m5.proxy import *
from Device import BasicPioDevice
+from Serial import SerialDevice
class Uart(BasicPioDevice):
type = 'Uart'
abstract = True
cxx_header = "dev/uart.hh"
platform = Param.Platform(Parent.any, "Platform this device is part of.")
- terminal = Param.Terminal(Parent.any, "The terminal")
+ device = Param.SerialDevice(Parent.any, "The terminal")
class Uart8250(Uart):
type = 'Uart8250'
diff --git a/src/dev/alpha/backdoor.cc b/src/dev/alpha/backdoor.cc
index 5c627ca34..5187e5bae 100644
--- a/src/dev/alpha/backdoor.cc
+++ b/src/dev/alpha/backdoor.cc
@@ -233,7 +233,7 @@ AlphaBackdoor::write(PacketPtr pkt)
break;
case offsetof(AlphaAccess, outputChar):
- terminal->out((char)(val & 0xff));
+ terminal->writeData((char)(val & 0xff));
break;
default:
diff --git a/src/dev/arm/pl011.cc b/src/dev/arm/pl011.cc
index 479a28bd8..b6b41f9c3 100644
--- a/src/dev/arm/pl011.cc
+++ b/src/dev/arm/pl011.cc
@@ -48,7 +48,6 @@
#include "debug/Uart.hh"
#include "dev/arm/amba_device.hh"
#include "dev/arm/base_gic.hh"
-#include "dev/terminal.hh"
#include "mem/packet.hh"
#include "mem/packet_access.hh"
#include "params/Pl011.hh"
@@ -81,12 +80,12 @@ Pl011::read(PacketPtr pkt)
switch(daddr) {
case UART_DR:
data = 0;
- if (term->dataAvailable()) {
- data = term->in();
+ if (device->dataAvailable()) {
+ data = device->readData();
// Since we don't simulate a FIFO for incoming data, we
// assume it's empty and clear RXINTR and RTINTR.
clearInterrupts(UART_RXINTR | UART_RTINTR);
- if (term->dataAvailable()) {
+ if (device->dataAvailable()) {
DPRINTF(Uart, "Re-raising interrupt due to more data "
"after UART_DR read\n");
dataAvailable();
@@ -97,7 +96,7 @@ Pl011::read(PacketPtr pkt)
data =
UART_FR_CTS | // Clear To Send
// Given we do not simulate a FIFO we are either empty or full.
- (!term->dataAvailable() ? UART_FR_RXFE : UART_FR_RXFF) |
+ (!device->dataAvailable() ? UART_FR_RXFE : UART_FR_RXFF) |
UART_FR_TXFE; // TX FIFO empty
DPRINTF(Uart,
@@ -199,7 +198,7 @@ Pl011::write(PacketPtr pkt)
if ((data & 0xFF) == 0x04 && endOnEOT)
exitSimLoop("UART received EOT", 0);
- term->out(data & 0xFF);
+ device->writeData(data & 0xFF);
// We're supposed to clear TXINTR when this register is
// written to, however. since we're also infinitely fast, we
// need to immediately raise it again.
@@ -229,7 +228,7 @@ Pl011::write(PacketPtr pkt)
case UART_ICR:
DPRINTF(Uart, "Clearing interrupts 0x%x\n", data);
clearInterrupts(data);
- if (term->dataAvailable()) {
+ if (device->dataAvailable()) {
DPRINTF(Uart, "Re-raising interrupt due to more data after "
"UART_ICR write\n");
dataAvailable();
diff --git a/src/dev/serial.cc b/src/dev/serial.cc
new file mode 100644
index 000000000..63e8a382b
--- /dev/null
+++ b/src/dev/serial.cc
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2014, 2017 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ * redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution;
+ * neither the name of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Authors: Andreas Sandberg
+ */
+
+#include "dev/serial.hh"
+
+#include "base/misc.hh"
+#include "params/SerialDevice.hh"
+
+SerialDevice::SerialDevice(const SerialDeviceParams *p)
+ : SimObject(p), interfaceCallback(nullptr)
+{
+}
+
+SerialDevice::~SerialDevice()
+{
+}
+
+void
+SerialDevice::regInterfaceCallback(Callback *c)
+{
+ // This can happen if the user has connected multiple UARTs to the
+ // same terminal. In that case, each of them tries to register
+ // callbacks.
+ if (interfaceCallback)
+ fatal("A UART has already been associated with this device.\n");
+ interfaceCallback = c;
+}
+
+void
+SerialDevice::notifyInterface()
+{
+ assert(dataAvailable());
+ // Registering a callback is optional.
+ if (interfaceCallback)
+ interfaceCallback->process();
+}
+
diff --git a/src/dev/serial.hh b/src/dev/serial.hh
new file mode 100644
index 000000000..4ea2f5ea8
--- /dev/null
+++ b/src/dev/serial.hh
@@ -0,0 +1,143 @@
+/*
+ * Copyright (c) 2014, 2017 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ * redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution;
+ * neither the name of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Authors: Andreas Sandberg
+ */
+
+#ifndef __DEV_SERIAL_HH__
+#define __DEV_SERIAL_HH__
+
+#include "base/callback.hh"
+#include "sim/sim_object.hh"
+
+struct SerialDeviceParams;
+
+/**
+ * Base class for serial devices such as terminals.
+ *
+ * This class provides a unified interface that all serial (RS232 or
+ * similar) devices must implement. A device can be wired to exactly
+ * one host serial interface (serial port model).
+ *
+ * SerialDevices are passive devices that are <i>driven</i> by the
+ * serial interface using the writeData(c) (the interface sends a
+ * character) and readData() (the interface reads a character)
+ * methods. Serial devices need to override these methods to
+ * communicate with the host interface layer.
+ *
+ * To implement basic flow control, serial devices must implement the
+ * dataAvailable() method. This method returns true if a valid
+ * character can be read using the readData() method. When data
+ * becomes available, the serial device must call the
+ * notifyInterface() method to send a callback to the interface layer.
+ *
+ * To send a character (host to device), the interface layer calls
+ * writeData(char) to send a character to the serial device.
+ *
+ * To read a character (device to host), the interface layer calls
+ * dataAvailable() to determine if there is a character pending. If
+ * there is data available, it immediately calls readData() to get the
+ * character. The receive loop in the serial device typically looks
+ * like this:
+ *
+ * \code{.cc}
+ * while (device.dataAvailable()) {
+ * printf("%c", (int)device.readData());
+ * }
+ * \endcode
+ *
+ * To avoid polling, the interface layer may register a data available
+ * callback using the regInterfaceCallback() method. The device uses
+ * this callback to notify the interface layer whenever there is new
+ * data pending. Note that devices will normally only notify the
+ * interface layer when there is a state transition in the
+ * device. E.g., the dataAvailable() transitions from false to
+ * true. This means that there can be multiple pending characters when
+ * the interface layer receives the callback.
+ */
+class SerialDevice : public SimObject
+{
+ public:
+ SerialDevice(const SerialDeviceParams *p);
+ ~SerialDevice();
+
+ public: // Serial device API (UART->Device)
+ /**
+ * Register a data available callback into the host interface layer.
+ *
+ * Serial devices need to call the underlying host interface layer
+ * to inform it of state change such as pending data that can be
+ * read from the device by the interface layer using the readData()
+ * method. The interface layer may use this method to register a
+ * callback that informs it of pending data.
+ *
+ * @param c Callback instance from interface layer.
+ */
+ void regInterfaceCallback(Callback *c);
+
+ /**
+ * Check if there is pending data from the serial device.
+ *
+ * @return true if there is data pending that can be read using
+ * the readData() method.
+ */
+ virtual bool dataAvailable() const = 0;
+
+ /**
+ * Transmit a character from the host interface to the device.
+ *
+ * @param c Received data.
+ */
+ virtual void writeData(uint8_t c) = 0;
+
+ /**
+ * Read a character from the device.
+ *
+ * @return Character from the device's output buffer, undefined if
+ * no data is pending.
+ */
+ virtual uint8_t readData() = 0;
+
+ protected:
+ /** Notify the host interface of pending data. */
+ void notifyInterface();
+
+ private:
+ /** Currently regisxtered host interface layer callback */
+ Callback *interfaceCallback;
+};
+
+#endif // __DEV_SERIAL_HH__
diff --git a/src/dev/terminal.cc b/src/dev/terminal.cc
index 9f0ea5ea3..4f9881ddd 100644
--- a/src/dev/terminal.cc
+++ b/src/dev/terminal.cc
@@ -107,7 +107,7 @@ Terminal::DataEvent::process(int revent)
* Terminal code
*/
Terminal::Terminal(const Params *p)
- : SimObject(p), termDataAvail(NULL), listenEvent(NULL), dataEvent(NULL),
+ : SerialDevice(p), listenEvent(NULL), dataEvent(NULL),
number(p->number), data_fd(-1), txbuf(16384), rxbuf(16384),
outfile(p->output ? simout.findOrCreate(p->name) : NULL)
#if TRACING_ON == 1
@@ -133,16 +133,6 @@ Terminal::~Terminal()
delete dataEvent;
}
-void
-Terminal::regDataAvailCallback(Callback *c)
-{
- // This can happen if the user has connected multiple UARTs to the
- // same terminal. In that case, each of them tries to register
- // callbacks.
- if (termDataAvail)
- fatal("Terminal already has already been associated with a UART.\n");
- termDataAvail = c;
-}
///////////////////////////////////////////////////////////////////////
// socket creation and terminal attach
@@ -233,9 +223,7 @@ Terminal::data()
len = read(buf, sizeof(buf));
if (len) {
rxbuf.write((char *)buf, len);
- // Inform the UART there is data available
- assert(termDataAvail);
- termDataAvail->process();
+ notifyInterface();
}
}
@@ -282,7 +270,7 @@ Terminal::write(const uint8_t *buf, size_t len)
#define RECEIVE_ERROR (ULL(3) << 62)
uint8_t
-Terminal::in()
+Terminal::readData()
{
uint8_t c;
@@ -301,7 +289,7 @@ Terminal::console_in()
uint64_t value;
if (dataAvailable()) {
- value = RECEIVE_SUCCESS | in();
+ value = RECEIVE_SUCCESS | readData();
if (!rxbuf.empty())
value |= MORE_PENDING;
} else {
@@ -314,7 +302,7 @@ Terminal::console_in()
}
void
-Terminal::out(char c)
+Terminal::writeData(uint8_t c)
{
#if TRACING_ON == 1
if (DTRACE(Terminal)) {
@@ -343,7 +331,7 @@ Terminal::out(char c)
write(c);
if (outfile)
- outfile->stream()->write(&c, 1);
+ outfile->stream()->put((char)c);
DPRINTF(TerminalVerbose, "out: \'%c\' %#02x\n",
isprint(c) ? c : ' ', (int)c);
diff --git a/src/dev/terminal.hh b/src/dev/terminal.hh
index 41c2a9e26..8b6ec0b7f 100644
--- a/src/dev/terminal.hh
+++ b/src/dev/terminal.hh
@@ -43,30 +43,15 @@
#include "base/pollevent.hh"
#include "base/socket.hh"
#include "cpu/intr_control.hh"
+#include "dev/serial.hh"
#include "params/Terminal.hh"
#include "sim/sim_object.hh"
class OutputStream;
class TerminalListener;
-class Terminal : public SimObject
+class Terminal : public SerialDevice
{
- public:
- /**
- * Register a data available callback into the transport layer.
- *
- * The terminal needs to call the underlying transport layer to
- * inform it of available data. The transport layer uses this
- * method to register a callback that informs it of pending data.
- *
- * @param c Callback instance from transport layer.
- */
- void regDataAvailCallback(Callback *c);
-
- protected:
- /** Currently registered transport layer callbacks */
- Callback *termDataAvail;
-
protected:
class ListenEvent : public PollEvent
{
@@ -129,13 +114,15 @@ class Terminal : public SimObject
size_t write(const uint8_t *buf, size_t len);
void detach();
+ public: // SerialDevice interface
+ uint8_t readData() override;
+ void writeData(uint8_t c) override;
+ bool dataAvailable() const override { return !rxbuf.empty(); }
+
public:
/////////////////
// OS interface
- // Get a character from the terminal.
- uint8_t in();
-
// get a character from the terminal in the console specific format
// corresponds to GETC:
// retval<63:61>
@@ -149,12 +136,6 @@ class Terminal : public SimObject
//
// Interrupts are cleared when the buffer is empty.
uint64_t console_in();
-
- // Send a character to the terminal
- void out(char c);
-
- // Ask the terminal if data is available
- bool dataAvailable() { return !rxbuf.empty(); }
};
#endif // __DEV_TERMINAL_HH__
diff --git a/src/dev/uart.cc b/src/dev/uart.cc
index 01900445f..ff952cc7f 100644
--- a/src/dev/uart.cc
+++ b/src/dev/uart.cc
@@ -34,18 +34,17 @@
#include "dev/uart.hh"
-#include "dev/platform.hh"
-#include "dev/terminal.hh"
+#include "dev/serial.hh"
using namespace std;
Uart::Uart(const Params *p, Addr pio_size)
: BasicPioDevice(p, pio_size),
- platform(p->platform), term(p->terminal),
+ platform(p->platform), device(p->device),
callbackDataAvail(this)
{
status = 0;
- // setup terminal callbacks
- term->regDataAvailCallback(&callbackDataAvail);
+ // setup serial device callbacks
+ device->regInterfaceCallback(&callbackDataAvail);
}
diff --git a/src/dev/uart.hh b/src/dev/uart.hh
index 6c9c08ee7..bf3dcf7c3 100644
--- a/src/dev/uart.hh
+++ b/src/dev/uart.hh
@@ -35,8 +35,9 @@
#ifndef __UART_HH__
#define __UART_HH__
+#include "base/callback.hh"
#include "dev/io_device.hh"
-#include "dev/terminal.hh"
+#include "dev/serial.hh"
#include "params/Uart.hh"
class Platform;
@@ -49,7 +50,7 @@ class Uart : public BasicPioDevice
protected:
int status;
Platform *platform;
- Terminal *term;
+ SerialDevice *device;
public:
typedef UartParams Params;
diff --git a/src/dev/uart8250.cc b/src/dev/uart8250.cc
index 482135c7b..f99b2472b 100644
--- a/src/dev/uart8250.cc
+++ b/src/dev/uart8250.cc
@@ -42,7 +42,6 @@
#include "config/the_isa.hh"
#include "debug/Uart.hh"
#include "dev/platform.hh"
-#include "dev/terminal.hh"
#include "mem/packet.hh"
#include "mem/packet_access.hh"
@@ -108,8 +107,8 @@ Uart8250::read(PacketPtr pkt)
switch (daddr) {
case 0x0:
if (!(LCR & 0x80)) { // read byte
- if (term->dataAvailable())
- pkt->set(term->in());
+ if (device->dataAvailable())
+ pkt->set(device->readData());
else {
pkt->set((uint8_t)0);
// A limited amount of these are ok.
@@ -118,7 +117,7 @@ Uart8250::read(PacketPtr pkt)
status &= ~RX_INT;
platform->clearConsoleInt();
- if (term->dataAvailable() && (IER & UART_IER_RDI))
+ if (device->dataAvailable() && (IER & UART_IER_RDI))
scheduleIntr(&rxIntrEvent);
} else { // dll divisor latch
;
@@ -154,7 +153,7 @@ Uart8250::read(PacketPtr pkt)
uint8_t lsr;
lsr = 0;
// check if there are any bytes to be read
- if (term->dataAvailable())
+ if (device->dataAvailable())
lsr = UART_LSR_DR;
lsr |= UART_LSR_TEMT | UART_LSR_THRE;
pkt->set(lsr);
@@ -190,7 +189,7 @@ Uart8250::write(PacketPtr pkt)
switch (daddr) {
case 0x0:
if (!(LCR & 0x80)) { // write byte
- term->out(pkt->get<uint8_t>());
+ device->writeData(pkt->get<uint8_t>());
platform->clearConsoleInt();
status &= ~TX_INT;
if (UART_IER_THRI & IER)
@@ -225,7 +224,7 @@ Uart8250::write(PacketPtr pkt)
status &= ~TX_INT;
}
- if ((UART_IER_RDI & IER) && term->dataAvailable()) {
+ if ((UART_IER_RDI & IER) && device->dataAvailable()) {
DPRINTF(Uart, "IER: IER_RDI set, scheduling RX intrrupt\n");
scheduleIntr(&rxIntrEvent);
} else {
diff --git a/src/dev/virtio/VirtIOConsole.py b/src/dev/virtio/VirtIOConsole.py
index cd73d6509..bce5e1de2 100644
--- a/src/dev/virtio/VirtIOConsole.py
+++ b/src/dev/virtio/VirtIOConsole.py
@@ -40,6 +40,7 @@
from m5.params import *
from m5.proxy import *
from VirtIO import VirtIODeviceBase
+from Serial import SerialDevice
class VirtIOConsole(VirtIODeviceBase):
type = 'VirtIOConsole'
@@ -48,4 +49,4 @@ class VirtIOConsole(VirtIODeviceBase):
qRecvSize = Param.Unsigned(16, "Receive queue size (descriptors)")
qTransSize = Param.Unsigned(16, "Transmit queue size (descriptors)")
- terminal = Param.Terminal(Parent.any, "The terminal")
+ device = Param.SerialDevice("Serial device attached to this device")
diff --git a/src/dev/virtio/console.cc b/src/dev/virtio/console.cc
index e3428e951..1027925bb 100644
--- a/src/dev/virtio/console.cc
+++ b/src/dev/virtio/console.cc
@@ -47,7 +47,7 @@ VirtIOConsole::VirtIOConsole(Params *params)
: VirtIODeviceBase(params, ID_CONSOLE, sizeof(Config), F_SIZE),
qRecv(params->system->physProxy, params->qRecvSize, *this),
qTrans(params->system->physProxy, params->qTransSize, *this),
- term(*params->terminal), callbackDataAvail(qRecv)
+ device(*params->device), callbackDataAvail(qRecv)
{
registerQueue(qRecv);
registerQueue(qTrans);
@@ -55,7 +55,7 @@ VirtIOConsole::VirtIOConsole(Params *params)
config.cols = 80;
config.rows = 24;
- term.regDataAvailCallback(&callbackDataAvail);
+ device.regInterfaceCallback(&callbackDataAvail);
}
@@ -81,11 +81,11 @@ VirtIOConsole::TermRecvQueue::trySend()
// get free descriptors (i.e., there are buffers available to
// send) from the guest.
VirtDescriptor *d;
- while (parent.term.dataAvailable() && (d = consumeDescriptor())) {
+ while (parent.device.dataAvailable() && (d = consumeDescriptor())) {
DPRINTF(VIOConsole, "Got descriptor (len: %i)\n", d->size());
size_t len(0);
- while (parent.term.dataAvailable() && len < d->size()) {
- uint8_t in(parent.term.in());
+ while (parent.device.dataAvailable() && len < d->size()) {
+ uint8_t in(parent.device.readData());
d->chainWrite(len, &in, sizeof(uint8_t));
++len;
}
@@ -108,7 +108,7 @@ VirtIOConsole::TermTransQueue::onNotifyDescriptor(VirtDescriptor *desc)
uint8_t data[size];
desc->chainRead(0, data, size);
for (int i = 0; i < desc->size(); ++i)
- parent.term.out(data[i]);
+ parent.device.writeData(data[i]);
// Tell the guest that we are done with this descriptor.
produceDescriptor(desc, 0);
diff --git a/src/dev/virtio/console.hh b/src/dev/virtio/console.hh
index e41ff9a65..720b60044 100644
--- a/src/dev/virtio/console.hh
+++ b/src/dev/virtio/console.hh
@@ -40,8 +40,8 @@
#ifndef __DEV_VIRTIO_CONSOLE_HH__
#define __DEV_VIRTIO_CONSOLE_HH__
+#include "dev/serial.hh"
#include "dev/virtio/base.hh"
-#include "dev/terminal.hh"
struct VirtIOConsoleParams;
@@ -147,7 +147,7 @@ class VirtIOConsole : public VirtIODeviceBase
TermTransQueue qTrans;
protected:
- Terminal &term;
+ SerialDevice &device;
MakeCallback<VirtIOConsole::TermRecvQueue,
&VirtIOConsole::TermRecvQueue::trySend> callbackDataAvail;
};