summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/dev/arm/pl011.cc146
-rw-r--r--src/dev/arm/pl011.hh150
2 files changed, 144 insertions, 152 deletions
diff --git a/src/dev/arm/pl011.cc b/src/dev/arm/pl011.cc
index d690ee9cb..2abd82e96 100644
--- a/src/dev/arm/pl011.cc
+++ b/src/dev/arm/pl011.cc
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010 ARM Limited
+ * Copyright (c) 2010, 2015 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
@@ -38,23 +38,29 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
+ * Andreas Sandberg
*/
+#include "dev/arm/pl011.hh"
+
#include "base/trace.hh"
#include "debug/Checkpoint.hh"
#include "debug/Uart.hh"
#include "dev/arm/amba_device.hh"
#include "dev/arm/base_gic.hh"
-#include "dev/arm/pl011.hh"
#include "dev/terminal.hh"
#include "mem/packet.hh"
#include "mem/packet_access.hh"
#include "sim/sim_exit.hh"
-
-Pl011::Pl011(const Params *p)
- : Uart(p, 0xfff), control(0x300), fbrd(0), ibrd(0), lcrh(0), ifls(0x12),
- imsc(0), rawInt(0), maskInt(0), intNum(p->int_num), gic(p->gic),
- endOnEOT(p->end_on_eot), intDelay(p->int_delay), intEvent(this)
+#include "params/Pl011.hh"
+
+Pl011::Pl011(const Pl011Params *p)
+ : Uart(p, 0xfff),
+ intEvent(this),
+ control(0x300), fbrd(0), ibrd(0), lcrh(0), ifls(0x12),
+ imsc(0), rawInt(0),
+ gic(p->gic), endOnEOT(p->end_on_eot), intNum(p->int_num),
+ intDelay(p->int_delay)
{
}
@@ -75,17 +81,23 @@ Pl011::read(PacketPtr pkt)
switch(daddr) {
case UART_DR:
data = 0;
- if (term->dataAvailable())
+ if (term->dataAvailable()) {
data = term->in();
+ // Since we don't simulate a FIFO for incoming data, we
+ // assume it's empty and clear RXINTR and RTINTR.
+ clearInterrupts(UART_RXINTR | UART_RTINTR);
+ }
break;
case UART_FR:
- // For now we're infintely fast, so TX is never full, always empty,
- // always clear to send
- data = UART_FR_TXFE | UART_FR_CTS;
- if (!term->dataAvailable())
- data |= UART_FR_RXFE;
- DPRINTF(Uart, "Reading FR register as %#x rawInt=0x%x imsc=0x%x maskInt=0x%x\n",
- data, rawInt, imsc, maskInt);
+ data =
+ UART_FR_CTS | // Clear To Send
+ (!term->dataAvailable() ? UART_FR_RXFE : 0) | // RX FIFO Empty
+ UART_FR_TXFE; // TX FIFO empty
+
+ DPRINTF(Uart,
+ "Reading FR register as %#x rawInt=0x%x "
+ "imsc=0x%x maskInt=0x%x\n",
+ data, rawInt, imsc, maskInt());
break;
case UART_CR:
data = control;
@@ -110,8 +122,8 @@ Pl011::read(PacketPtr pkt)
DPRINTF(Uart, "Reading Raw Int status as 0x%x\n", rawInt);
break;
case UART_MIS:
- DPRINTF(Uart, "Reading Masked Int status as 0x%x\n", rawInt);
- data = maskInt;
+ DPRINTF(Uart, "Reading Masked Int status as 0x%x\n", maskInt());
+ data = maskInt();
break;
default:
if (readId(pkt, AMBA_ID, pioAddr)) {
@@ -182,15 +194,11 @@ Pl011::write(PacketPtr pkt)
exitSimLoop("UART received EOT", 0);
term->out(data & 0xFF);
-
- //raw interrupt is set regardless of imsc.txim
- rawInt.txim = 1;
- if (imsc.txim) {
- DPRINTF(Uart, "TX int enabled, scheduling interruptt\n");
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
- }
-
+ // We're supposed to clear TXINTR when this register is
+ // written to, however. since we're also infinitely fast, we
+ // need to immediately raise it again.
+ clearInterrupts(UART_TXINTR);
+ raiseInterrupts(UART_TXINTR);
break;
case UART_CR:
control = data;
@@ -208,35 +216,13 @@ Pl011::write(PacketPtr pkt)
ifls = data;
break;
case UART_IMSC:
- imsc = data;
-
- if (imsc.feim || imsc.peim || imsc.beim || imsc.oeim || imsc.rsvd)
- panic("Unknown interrupt enabled\n");
-
- // rimim, ctsmim, dcdmim, dsrmim can be enabled but are ignored
- // they are supposed to interrupt on a change of status in the line
- // which we should never have since our terminal is happy to always
- // receive bytes.
-
- if (imsc.txim) {
- DPRINTF(Uart, "Writing to IMSC: TX int enabled, scheduling interruptt\n");
- rawInt.txim = 1;
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
- }
-
+ DPRINTF(Uart, "Setting interrupt mask 0x%x\n", data);
+ setInterruptMask(data);
break;
case UART_ICR:
DPRINTF(Uart, "Clearing interrupts 0x%x\n", data);
- rawInt = rawInt & ~data;
- maskInt = rawInt & imsc;
-
- DPRINTF(Uart, " -- Masked interrupts 0x%x\n", maskInt);
-
- if (!maskInt)
- gic->clearInt(intNum);
-
+ clearInterrupts(data);
break;
default:
panic("Tried to write PL011 at offset %#x that doesn't exist\n", daddr);
@@ -251,27 +237,36 @@ Pl011::dataAvailable()
{
/*@todo ignore the fifo, just say we have data now
* We might want to fix this, or we might not care */
- rawInt.rxim = 1;
- rawInt.rtim = 1;
-
DPRINTF(Uart, "Data available, scheduling interrupt\n");
-
- if (!intEvent.scheduled())
- schedule(intEvent, curTick() + intDelay);
+ raiseInterrupts(UART_RXINTR | UART_RTINTR);
}
void
Pl011::generateInterrupt()
{
DPRINTF(Uart, "Generate Interrupt: imsc=0x%x rawInt=0x%x maskInt=0x%x\n",
- imsc, rawInt, maskInt);
- maskInt = imsc & rawInt;
+ imsc, rawInt, maskInt());
- if (maskInt.rxim || maskInt.rtim || maskInt.txim) {
+ if (maskInt()) {
gic->sendInt(intNum);
DPRINTF(Uart, " -- Generated\n");
}
+}
+
+void
+Pl011::setInterrupts(uint16_t ints, uint16_t mask)
+{
+ const bool old_ints(!!maskInt());
+
+ imsc = mask;
+ rawInt = ints;
+ if (!old_ints && maskInt()) {
+ if (!intEvent.scheduled())
+ schedule(intEvent, curTick() + intDelay);
+ } else if (old_ints && !maskInt()) {
+ gic->clearInt(intNum);
+ }
}
@@ -286,17 +281,9 @@ Pl011::serialize(std::ostream &os)
SERIALIZE_SCALAR(lcrh);
SERIALIZE_SCALAR(ifls);
- uint16_t imsc_serial = imsc;
- SERIALIZE_SCALAR(imsc_serial);
-
- uint16_t rawInt_serial = rawInt;
- SERIALIZE_SCALAR(rawInt_serial);
-
- uint16_t maskInt_serial = maskInt;
- SERIALIZE_SCALAR(maskInt_serial);
-
- SERIALIZE_SCALAR(endOnEOT);
- SERIALIZE_SCALAR(intDelay);
+ // Preserve backwards compatibility by giving these silly names.
+ paramOut(os, "imsc_serial", imsc);
+ paramOut(os, "rawInt_serial", rawInt);
}
void
@@ -310,20 +297,9 @@ Pl011::unserialize(Checkpoint *cp, const std::string &section)
UNSERIALIZE_SCALAR(lcrh);
UNSERIALIZE_SCALAR(ifls);
- uint16_t imsc_serial;
- UNSERIALIZE_SCALAR(imsc_serial);
- imsc = imsc_serial;
-
- uint16_t rawInt_serial;
- UNSERIALIZE_SCALAR(rawInt_serial);
- rawInt = rawInt_serial;
-
- uint16_t maskInt_serial;
- UNSERIALIZE_SCALAR(maskInt_serial);
- maskInt = maskInt_serial;
-
- UNSERIALIZE_SCALAR(endOnEOT);
- UNSERIALIZE_SCALAR(intDelay);
+ // Preserve backwards compatibility by giving these silly names.
+ paramIn(cp, section, "imsc_serial", imsc);
+ paramIn(cp, section, "rawInt_serial", rawInt);
}
Pl011 *
diff --git a/src/dev/arm/pl011.hh b/src/dev/arm/pl011.hh
index b5c55beab..f2587c08d 100644
--- a/src/dev/arm/pl011.hh
+++ b/src/dev/arm/pl011.hh
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010 ARM Limited
+ * Copyright (c) 2010-2015 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
@@ -38,6 +38,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
+ * Andreas Sandberg
*/
@@ -48,18 +49,73 @@
#ifndef __DEV_ARM_PL011_H__
#define __DEV_ARM_PL011_H__
-#include "base/bitfield.hh"
-#include "base/bitunion.hh"
#include "dev/arm/amba_device.hh"
-#include "dev/io_device.hh"
#include "dev/uart.hh"
-#include "params/Pl011.hh"
class BaseGic;
+struct Pl011Params;
class Pl011 : public Uart, public AmbaDevice
{
- protected:
+ public:
+ Pl011(const Pl011Params *p);
+
+ void serialize(std::ostream &os) M5_ATTR_OVERRIDE;
+ void unserialize(Checkpoint *cp, const std::string &sec) M5_ATTR_OVERRIDE;
+
+ public: // PioDevice
+ Tick read(PacketPtr pkt) M5_ATTR_OVERRIDE;
+ Tick write(PacketPtr pkt) M5_ATTR_OVERRIDE;
+
+ public: // Uart
+ void dataAvailable() M5_ATTR_OVERRIDE;
+
+
+ protected: // Interrupt handling
+ /** Function to generate interrupt */
+ void generateInterrupt();
+
+ /**
+ * Assign new interrupt values and update interrupt signals
+ *
+ * A new interrupt is scheduled signalled if the set of unmasked
+ * interrupts goes empty to non-empty. Conversely, if the set of
+ * unmasked interrupts goes from non-empty to empty, the interrupt
+ * signal is cleared.
+ *
+ * @param ints New <i>raw</i> interrupt status
+ * @param mask New interrupt mask
+ */
+ void setInterrupts(uint16_t ints, uint16_t mask);
+ /**
+ * Convenience function to update the interrupt mask
+ *
+ * @see setInterrupts
+ * @param mask New interrupt mask
+ */
+ void setInterruptMask(uint16_t mask) { setInterrupts(rawInt, mask); }
+ /**
+ * Convenience function to raise a new interrupt
+ *
+ * @see setInterrupts
+ * @param ints Set of interrupts to raise
+ */
+ void raiseInterrupts(uint16_t ints) { setInterrupts(rawInt | ints, imsc); }
+ /**
+ * Convenience function to clear interrupts
+ *
+ * @see setInterrupts
+ * @param ints Set of interrupts to clear
+ */
+ void clearInterrupts(uint16_t ints) { setInterrupts(rawInt & ~ints, imsc); }
+
+ /** Masked interrupt status register */
+ const inline uint16_t maskInt() const { return rawInt & imsc; }
+
+ /** Wrapper to create an event out of the thing */
+ EventWrapper<Pl011, &Pl011::generateInterrupt> intEvent;
+
+ protected: // Registers
static const uint64_t AMBA_ID = ULL(0xb105f00d00341011);
static const int UART_DR = 0x000;
static const int UART_FR = 0x018;
@@ -76,6 +132,18 @@ class Pl011 : public Uart, public AmbaDevice
static const int UART_MIS = 0x040;
static const int UART_ICR = 0x044;
+ static const uint16_t UART_RIINTR = 1 << 0;
+ static const uint16_t UART_CTSINTR = 1 << 1;
+ static const uint16_t UART_CDCINTR = 1 << 2;
+ static const uint16_t UART_DSRINTR = 1 << 3;
+ static const uint16_t UART_RXINTR = 1 << 4;
+ static const uint16_t UART_TXINTR = 1 << 5;
+ static const uint16_t UART_RTINTR = 1 << 6;
+ static const uint16_t UART_FEINTR = 1 << 7;
+ static const uint16_t UART_PEINTR = 1 << 8;
+ static const uint16_t UART_BEINTR = 1 << 9;
+ static const uint16_t UART_OEINTR = 1 << 10;
+
uint16_t control;
/** fractional baud rate divisor. Not used for anything but reporting
@@ -94,76 +162,24 @@ class Pl011 : public Uart, public AmbaDevice
* written value */
uint16_t ifls;
- BitUnion16(INTREG)
- Bitfield<0> rimim;
- Bitfield<1> ctsmim;
- Bitfield<2> dcdmim;
- Bitfield<3> dsrmim;
- Bitfield<4> rxim;
- Bitfield<5> txim;
- Bitfield<6> rtim;
- Bitfield<7> feim;
- Bitfield<8> peim;
- Bitfield<9> beim;
- Bitfield<10> oeim;
- Bitfield<15,11> rsvd;
- EndBitUnion(INTREG)
-
/** interrupt mask register. */
- INTREG imsc;
+ uint16_t imsc;
/** raw interrupt status register */
- INTREG rawInt;
-
- /** Masked interrupt status register */
- INTREG maskInt;
-
- /** Interrupt number to generate */
- int intNum;
+ uint16_t rawInt;
+ protected: // Configuration
/** Gic to use for interrupting */
- BaseGic *gic;
+ BaseGic * const gic;
/** Should the simulation end on an EOT */
- bool endOnEOT;
-
- /** Delay before interrupting */
- Tick intDelay;
-
- /** Function to generate interrupt */
- void generateInterrupt();
-
- /** Wrapper to create an event out of the thing */
- EventWrapper<Pl011, &Pl011::generateInterrupt> intEvent;
+ const bool endOnEOT;
- public:
- typedef Pl011Params Params;
- const Params *
- params() const
- {
- return dynamic_cast<const Params *>(_params);
- }
- Pl011(const Params *p);
-
- virtual Tick read(PacketPtr pkt);
- virtual Tick write(PacketPtr pkt);
-
- /**
- * Inform the uart that there is data available.
- */
- virtual void dataAvailable();
-
-
- /**
- * Return if we have an interrupt pending
- * @return interrupt status
- * @todo fix me when implementation improves
- */
- virtual bool intStatus() { return false; }
-
- virtual void serialize(std::ostream &os);
- virtual void unserialize(Checkpoint *cp, const std::string &section);
+ /** Interrupt number to generate */
+ const int intNum;
+ /** Delay before interrupting */
+ const Tick intDelay;
};
#endif //__DEV_ARM_PL011_H__
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 20:13:10 +0000