summaryrefslogtreecommitdiff
path: root/system/alpha
diff options
context:
space:
mode:
Diffstat (limited to 'system/alpha')
-rw-r--r--system/alpha/palcode/Makefile32
-rw-r--r--system/alpha/palcode/osfpal.S5242
-rw-r--r--system/alpha/palcode/osfpal.s5242
-rw-r--r--system/alpha/palcode/osfpal_cache_copy.S5257
-rw-r--r--system/alpha/palcode/osfpal_cache_copy.s5257
-rw-r--r--system/alpha/palcode/osfpal_cache_copy_unaligned.S5253
-rw-r--r--system/alpha/palcode/osfpal_cache_copy_unaligned.s5253
-rw-r--r--system/alpha/palcode/platform_m5.S2726
-rw-r--r--system/alpha/palcode/platform_m5.s2726
-rw-r--r--system/alpha/palcode/platform_tlaser.S2821
-rw-r--r--system/alpha/palcode/platform_tlaser.s2821
11 files changed, 21313 insertions, 21317 deletions
diff --git a/system/alpha/palcode/Makefile b/system/alpha/palcode/Makefile
index ac045e011..2d5e907f1 100644
--- a/system/alpha/palcode/Makefile
+++ b/system/alpha/palcode/Makefile
@@ -1,40 +1,36 @@
#Makefile for palcode
#Works on alpha-linux and builds elf executable
-#19 December 2003 - Ali Saidi
-
GAS = alpha-elf-as
CC = alpha-elf-g++
LD = alpha-elf-ld
-#CFLAGS=-I ../h -E -P -D SIMOS -nostdinc -nostdinc++ -x c++
-CFLAGS=-I . -I ../h -E -P -D SIMOS -D BUILD_PALCODE -nostdinc -nostdinc++ -x c++
-GASFLAGS=-m21164
+CFLAGS=-I . -I ../h -D SIMOS -D BUILD_PALCODE -nostdinc -nostdinc++ -Wa,-m21164
LDFLAGS=-Ttext 0x4000
-SOURCES=osfpal.s osfpal_cache_copy.s osfpal_cache_copy_unaligned.s platform_tlaser.s \
- platform_m5.s
-PREPROC := $(SOURCES:.s=.i)
-TLOBJS = osfpal.o osfpal_cache_copy.o osfpal_cache_copy_unaligned.o platform_tlaser.o
-TSOBJS = osfpal.o osfpal_cache_copy.o osfpal_cache_copy_unaligned.o platform_m5.o
-
-%.i: %.s
- $(CC) $(CFLAGS) $< > $@
+TLOBJS = osfpal.o platform_tlaser.o
+TLOBJS_COPY = osfpal_cache_copy.o osfpal_cache_copy_unaligned.o
+TSOBJS = osfpal.o platform_m5.o
+TSOBJS_COPY = osfpal_cache_copy.o osfpal_cache_copy_unaligned.o
-%.o: %.i
- $(GAS) $(GASFLAGS) -o $@ $<
+%.o: %.S
+ $(CC) $(CFLAGS) -o $@ -c $<
all: tlaser tsunami
-tlaser: $(PREPROC) $(TLOBJS)
+tlaser: $(TLOBJS)
$(LD) $(LDFLAGS) -o tl_osfpal osfpal.o platform_tlaser.o
+
+tlaser_copy: $(TLOBJS_COPY) $(TLOBJS)
$(LD) $(LDFLAGS) -o tl_osfpal_cache osfpal_cache_copy.o platform_tlaser.o
$(LD) $(LDFLAGS) -o tl_osfpal_unalign osfpal_cache_copy_unaligned.o platform_tlaser.o
-tsunami: $(PREPROC) $(TSOBJS)
+tsunami: $(TSOBJS)
$(LD) $(LDFLAGS) -o ts_osfpal osfpal.o platform_m5.o
+
+tsunami_copy: $(TSOBJS) $(TSOBJS_COPY)
$(LD) $(LDFLAGS) -o ts_osfpal_cache osfpal_cache_copy.o platform_m5.o
$(LD) $(LDFLAGS) -o ts_osfpal_unalign osfpal_cache_copy_unaligned.o platform_m5.o
clean:
- rm -f *.o *.i tl_osfpal tl_osfpal_cache tl_osfpal_unalign ts_osfpal \
+ rm -f *.o tl_osfpal tl_osfpal_cache tl_osfpal_unalign ts_osfpal \
ts_osfpal_cache ts_osfpal_unalign
diff --git a/system/alpha/palcode/osfpal.S b/system/alpha/palcode/osfpal.S
new file mode 100644
index 000000000..0796a80f9
--- /dev/null
+++ b/system/alpha/palcode/osfpal.S
@@ -0,0 +1,5242 @@
+// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
+// since we don't have a mechanism to expand the data structures.... pb Nov/95
+
+// build_fixed_image: not sure what means
+// real_mm to be replaced during rewrite
+// remove_save_state remove_restore_state can be remooved to save space ??
+
+
+#include "ev5_defs.h"
+#include "ev5_impure.h"
+#include "ev5_alpha_defs.h"
+#include "ev5_paldef.h"
+#include "ev5_osfalpha_defs.h"
+#include "fromHudsonMacros.h"
+#include "fromHudsonOsf.h"
+#include "dc21164FromGasSources.h"
+
+#ifdef SIMOS
+#define DEBUGSTORE(c) nop
+#else
+#define DEBUGSTORE(c) \
+ lda r13, c(zero) ; \
+ bsr r25, debugstore
+#endif
+
+#define DEBUG_EXC_ADDR()\
+ bsr r25, put_exc_addr; \
+ DEBUGSTORE(13) ; \
+ DEBUGSTORE(10)
+
+#define egore 0
+#define acore 0
+#define beh_model 0
+#define ev5_p2 1
+#define ev5_p1 0
+#define ldvpte_bug_fix 1
+#define osf_chm_fix 0
+
+// Do we want to do this?? pb
+#define spe_fix 0
+// Do we want to do this?? pb
+#define build_fixed_image 0
+
+#define ev5_pass2
+#define enable_p4_fixups 0
+#define osf_svmin 1
+#define enable_physical_console 0
+#define fill_err_hack 0
+#define icflush_on_tbix 0
+#define max_cpuid 1
+#define perfmon_debug 0
+#define rawhide_system 0
+#define rax_mode 0
+
+
+// This is the fix for the user-mode super page references causing the machine to crash.
+#if (spe_fix == 1) && (build_fixed_image==1)
+#define hw_rei_spe br r31, hw_rei_update_spe
+#else
+#define hw_rei_spe hw_rei
+#endif
+
+
+// redefine a few of the distribution-code names to match the Hudson gas names.
+// opcodes
+#define ldqp ldq_p
+#define stqp stq_p
+#define ldlp ldl_p
+#define stlp stl_p
+
+#define r0 $0
+#define r1 $1
+#define r2 $2
+#define r3 $3
+#define r4 $4
+#define r5 $5
+#define r6 $6
+#define r7 $7
+#define r8 $8
+#define r9 $9
+#define r10 $10
+#define r11 $11
+#define r12 $12
+#define r13 $13
+#define r14 $14
+#define r15 $15
+#define r16 $16
+#define r17 $17
+#define r18 $18
+#define r19 $19
+#define r20 $20
+#define r21 $21
+#define r22 $22
+#define r23 $23
+#define r24 $24
+#define r25 $25
+#define r26 $26
+#define r27 $27
+#define r28 $28
+#define r29 $29
+#define r30 $30
+#define r31 $31
+
+// .title "EV5 OSF PAL"
+// .ident "V1.18"
+//
+//****************************************************************************
+//* *
+//* Copyright (c) 1992, 1993, 1994, 1995 *
+//* by DIGITAL Equipment Corporation, Maynard, Mass. *
+//* *
+//* This software is furnished under a license and may be used and copied *
+//* only in accordance with the terms of such license and with the *
+//* inclusion of the above copyright notice. This software or any other *
+//* copies thereof may not be provided or otherwise made available to any *
+//* other person. No title to and ownership of the software is hereby *
+//* transferred. *
+//* *
+//* The information in this software is subject to change without notice *
+//* and should not be construed as a commitment by DIGITAL Equipment *
+//* Corporation. *
+//* *
+//* DIGITAL assumes no responsibility for the use or reliability of its *
+//* software on equipment which is not supplied by DIGITAL. *
+//* *
+//****************************************************************************
+
+// .sbttl "Edit History"
+//+
+// Who Rev When What
+// ------------ --- ----------- --------------------------------
+// DB 0.0 03-Nov-1992 Start
+// DB 0.1 28-Dec-1992 add swpctx
+// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
+// DB 0.3 11-Jan-1993 rearrange trap entry points
+// DB 0.4 01-Feb-1993 add tbi
+// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
+// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
+// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
+// Bug: typo on register number for store in wrunique
+// Bug: rti to kern uses r16 as scratch
+// Bug: callsys saving wrong value in pt_usp
+// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
+// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
+// Bug: rti stl_c could corrupt the stack
+// Bug: unaligned returning wrong value in r17 (or should be and)
+// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
+// DB 0.11 23-Feb-1993 Turn caches on in reset flow
+// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
+// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
+// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
+// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
+// DB 0.16 12-May-1993 Update reset
+// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
+// Bug: in wrmces, not clearing DPC, DSC
+// Update swppal
+// Add pal bugchecks, pal_save_state, pal_restore_state
+// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
+// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
+// DB 0.18 26-May-1993 PVC fixes
+// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
+// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
+// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
+// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
+// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
+// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
+// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
+// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
+// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
+// JM 0.22 28-jul-1993 Add WRIPIR instruction
+// JM 0.23 05-aug-1993 Bump version number for release
+// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
+// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
+// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
+// and SWPCTX
+// JM 0.26 07-oct-1993 Re-implement pal_version
+// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
+// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
+// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
+// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
+// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
+// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
+// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
+// JM 0.33 24-nov-1993 save/restore_state -
+// BUG: use ivptbr to restore mvptbr
+// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
+// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
+// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
+// BUG: generate ksnv halt when tb miss on kernel stack accesses
+// save exc_addr in r14 for invalid_dpte stack builder
+// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
+// the same shadow
+// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
+// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
+// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
+// Hide impure area manipulations in macros
+// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
+// Add some pvc_violate statements
+// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
+// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
+// Add code to ensure fen bit set in icsr before ldt
+// conditionally compile rax_more_reset out.
+// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
+// move rax reset stuff to ev5_osf_system_pal.m64
+// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
+// and performance monitoring bits
+// Change to save_state routine to save more iprs.
+// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
+// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
+// remove_save_state,remove_restore_state;fix new pvc violation in save_state
+// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
+// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
+// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
+// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
+// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
+// Add exc_sum and exc_mask to pal_save_state (not restore)
+// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
+// area.
+// Add performance counter support to swpctx and wrperfmon
+// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
+// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
+// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
+// taken in the interrupt flow, stack is pushed twice.
+// SWPPAL - update to support ECO 59 to allow 0 as a valid address
+// Add itb flush to save/restore state routines
+// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
+// conforms to itbia restriction.
+// Added enable_physical_console flag (for enter/exit console routines only)
+// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
+// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
+// nmiss_fetch_err to nmiss_fetch_ldr31_err.
+// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
+// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
+// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
+// Moved perfmon code here from system file.
+// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
+// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
+// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
+// after ISR read, but we won't catch the ISR update. reverse order
+// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
+// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
+// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
+// DTBMISS_SINGLE if not in palmode.
+// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
+// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
+// superpage mode in User mode and re-enable in kernel mode.
+// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
+// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
+// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
+// cpu bug.
+// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
+// ES 1.13 17-mar-1995 Refine osf_chm_fix
+// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
+// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
+// Force pvc checking of exit_console
+// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
+// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
+// instead of xor to maintain previous mode in pt_misc
+// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
+// not have pme set. The bits in icsr maintain the master enable state.
+// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
+//
+#define vmaj 1
+#define vmin 18
+#define vms_pal 1
+#define osf_pal 2
+#define pal_type osf_pal
+#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
+//-
+
+// .sbttl "PALtemp register usage"
+
+//+
+// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
+// for these PALtemps:
+//
+// pt0 local scratch
+// pt1 local scratch
+// pt2 entUna pt_entUna
+// pt3 CPU specific impure area pointer pt_impure
+// pt4 memory management temp
+// pt5 memory management temp
+// pt6 memory management temp
+// pt7 entIF pt_entIF
+// pt8 intmask pt_intmask
+// pt9 entSys pt_entSys
+// pt10
+// pt11 entInt pt_entInt
+// pt12 entArith pt_entArith
+// pt13 reserved for system specific PAL
+// pt14 reserved for system specific PAL
+// pt15 reserved for system specific PAL
+// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
+// pt17 sysval pt_sysval
+// pt18 usp pt_usp
+// pt19 ksp pt_ksp
+// pt20 PTBR pt_ptbr
+// pt21 entMM pt_entMM
+// pt22 kgp pt_kgp
+// pt23 PCBB pt_pcbb
+//
+//-
+
+// .sbttl "PALshadow register usage"
+//
+//+
+//
+// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
+// This maps the OSF PAL usage of R8 - R14 and R25:
+//
+// r8 ITBmiss/DTBmiss scratch
+// r9 ITBmiss/DTBmiss scratch
+// r10 ITBmiss/DTBmiss scratch
+// r11 PS
+// r12 local scratch
+// r13 local scratch
+// r14 local scratch
+// r25 local scratch
+//
+//
+//-
+
+// .sbttl "ALPHA symbol definitions"
+// _OSF_PSDEF GLOBAL
+// _OSF_PTEDEF GLOBAL
+// _OSF_VADEF GLOBAL
+// _OSF_PCBDEF GLOBAL
+// _OSF_SFDEF GLOBAL
+// _OSF_MMCSR_DEF GLOBAL
+// _SCBDEF GLOBAL
+// _FRMDEF GLOBAL
+// _EXSDEF GLOBAL
+// _OSF_A0_DEF GLOBAL
+// _MCESDEF GLOBAL
+
+// .sbttl "EV5 symbol definitions"
+
+// _EV5DEF
+// _PALTEMP
+// _MM_STAT_DEF
+// _EV5_MM
+// _EV5_IPLDEF
+
+// _HALT_CODES GLOBAL
+// _MCHK_CODES GLOBAL
+
+// _PAL_IMPURE
+// _PAL_LOGOUT
+
+
+
+
+// .sbttl "PALcode configuration options"
+
+// There are a number of options that may be assembled into this version of
+// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
+// the following). The options that can be adjusted cause the resultant PALcode
+// to reflect the desired target system.
+
+
+#define osfpal 1 // This is the PALcode for OSF.
+
+#ifndef rawhide_system
+
+#define rawhide_system 0
+#endif
+
+
+#ifndef real_mm
+// Page table translation vs 1-1 mapping
+#define real_mm 1
+#endif
+
+
+#ifndef rax_mode
+
+#define rax_mode 0
+#endif
+
+#ifndef egore
+// End of reset flow starts a program at 200000(hex).
+#define egore 1
+#endif
+
+#ifndef acore
+// End of reset flow starts a program at 40000(hex).
+#define acore 0
+#endif
+
+
+// assume acore+egore+rax_mode lt 2 // Assertion checker
+
+#ifndef beh_model
+// EV5 behavioral model specific code
+#define beh_model 1
+#endif
+
+#ifndef init_cbox
+// Reset flow init of Bcache and Scache
+#define init_cbox 1
+#endif
+
+#ifndef disable_crd
+// Decides whether the reset flow will disable
+#define disable_crd 0
+#endif
+
+ // correctable read interrupts via ICSR
+#ifndef perfmon_debug
+#define perfmon_debug 0
+#endif
+
+#ifndef icflush_on_tbix
+#define icflush_on_tbix 0
+#endif
+
+#ifndef remove_restore_state
+#define remove_restore_state 0
+#endif
+
+#ifndef remove_save_state
+#define remove_save_state 0
+#endif
+
+#ifndef enable_physical_console
+#define enable_physical_console 0
+#endif
+
+#ifndef ev5_p1
+#define ev5_p1 0
+#endif
+
+#ifndef ev5_p2
+#define ev5_p2 1
+#endif
+
+// assume ev5_p1+ev5_p2 eq 1
+
+#ifndef ldvpte_bug_fix
+#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
+#endif
+
+#ifndef spe_fix
+// If set, disable super-page mode in user mode and re-enable
+#define spe_fix 0
+#endif
+ // in kernel. Workaround for cpu bug.
+#ifndef build_fixed_image
+#define build_fixed_image 0
+#endif
+
+
+#ifndef fill_err_hack
+// If set, disable fill_error mode in user mode and re-enable
+#define fill_err_hack 0
+#endif
+
+ // in kernel. Workaround for cpu bug.
+
+// .macro hw_rei_spe
+// .iif eq spe_fix, hw_rei
+//#if spe_fix != 0
+//
+//
+//#define hw_rei_chm_count hw_rei_chm_count + 1
+// p4_fixup_label \hw_rei_chm_count
+// .iif eq build_fixed_image, br r31, hw_rei_update_spe
+// .iif ne build_fixed_image, hw_rei
+//#endif
+//
+// .endm
+
+// Add flag "osf_chm_fix" to enable dcache in user mode only
+// to avoid cpu bug.
+
+#ifndef osf_chm_fix
+// If set, enable D-Cache in
+#define osf_chm_fix 0
+#endif
+
+#if osf_chm_fix != 0
+// user mode only.
+#define hw_rei_chm_count 0
+#endif
+
+#if osf_chm_fix != 0
+
+#define hw_rei_stall_chm_count 0
+#endif
+
+#ifndef enable_p4_fixups
+
+#define enable_p4_fixups 0
+#endif
+
+ // If set, do EV5 Pass 4 fixups
+#if spe_fix == 0
+
+#define osf_chm_fix 0
+#endif
+
+#if spe_fix == 0
+
+#define enable_p4_fixups 0
+#endif
+
+ // Only allow fixups if fix enabled
+
+ //Turn off fill_errors and MEM_NEM in user mode
+// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
+// //save r22,r23,r24
+// stqp r22, 0x150(r31) //add
+// stqp r23, 0x158(r31) //contents
+// stqp r24, 0x160(r31) //bit mask
+//
+// lda r22, 0x82(r31)
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
+// bis r23,r31,r23
+//
+// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
+// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L20_ // ELSE
+//L10_: bis r23, r24, r23 // clear fillerr_en bit
+//L20_: // ENDIF
+//
+// stlp r23, 0x80(r22) // write back the CIA_MASK register
+// mb
+// ldlp r23, 0x80(r22)
+// bis r23,r31,r23
+// mb
+//
+// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
+// bis r23,r31,r23
+//
+//
+// lda r24, 0x400(r31) // r9 <- fillerr_en bit
+// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L40_ // ELSE
+//L30_: bis r23, r24, r23 // clear fillerr_en bit
+//L40_: // ENDIF
+//
+// stlp r23, 0(r22) // write back the CIA_CTRL register
+// mb
+// ldlp r23, 0(r22)
+// bis r23,r31,r23
+// mb
+//
+// //restore r22,r23,r24
+// ldqp r22, 0x150(r31)
+// ldqp r23, 0x158(r31)
+// ldqp r24, 0x160(r31)
+//
+// .endm
+
+// multiprocessor support can be enabled for a max of n processors by
+// setting the following to the number of processors on the system.
+// Note that this is really the max cpuid.
+
+#ifndef max_cpuid
+#define max_cpuid 8
+#endif
+
+#ifndef osf_svmin // platform specific palcode version number
+#define osf_svmin 0
+#endif
+
+
+#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
+
+// .mcall ldqp // override macro64 definition with macro from library
+// .mcall stqp // override macro64 definition with macro from library
+
+
+// .psect _pal,mix
+// huh pb pal_base:
+// huh pb #define current_block_base . - pal_base
+
+// .sbttl "RESET - Reset Trap Entry Point"
+//+
+// RESET - offset 0000
+// Entry:
+// Vectored into via hardware trap on reset, or branched to
+// on swppal.
+//
+// r0 = whami
+// r1 = pal_base
+// r2 = base of scratch area
+// r3 = halt code
+//
+//
+// Function:
+//
+//-
+
+ .text 0
+ . = 0x0000
+ .globl Pal_Base
+Pal_Base:
+ HDW_VECTOR(PAL_RESET_ENTRY)
+Trap_Reset:
+ nop
+#ifdef SIMOS
+ /*
+ * store into r1
+ */
+ br r1,sys_reset
+#else
+ /* following is a srcmax change */
+
+ DEBUGSTORE(0x41)
+ /* The original code jumped using r1 as a linkage register to pass the base
+ of PALcode to the platform specific code. We use r1 to pass a parameter
+ from the SROM, so we hardcode the address of Pal_Base in platform.s
+ */
+ br r31, sys_reset
+#endif
+
+ // Specify PAL version info as a constant
+ // at a known location (reset + 8).
+
+ .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
+ .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
+ .long 0
+ .long 0
+pal_impure_start:
+ .quad 0
+pal_debug_ptr:
+ .quad 0 // reserved for debug pointer ; 20
+#if beh_model == 0
+
+
+#if enable_p4_fixups != 0
+
+
+ .quad 0
+ .long p4_fixup_hw_rei_fixup_table
+#endif
+
+#else
+
+ .quad 0 //
+ .quad 0 //0x0030
+ .quad 0
+ .quad 0 //0x0040
+ .quad 0
+ .quad 0 //0x0050
+ .quad 0
+ .quad 0 //0x0060
+ .quad 0
+pal_enter_cns_address:
+ .quad 0 //0x0070 -- address to jump to from enter_console
+ .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
+#endif
+
+
+
+
+// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
+
+//+
+// IACCVIO - offset 0080
+// Entry:
+// Vectored into via hardware trap on Istream access violation or sign check error on PC.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV)
+// a2 <- -1 (for ifetch fault)
+// vector via entMM
+//-
+
+ HDW_VECTOR(PAL_IACCVIO_ENTRY)
+Trap_Iaccvio:
+ DEBUGSTORE(0x42)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_IACCVIO_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bic r14, 3, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entmm // get entry point
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r16, osfsf_pc(sp) // save pc
+ stq r29, osfsf_gp(sp) // save gp
+
+ mtpr r13, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ subq r31, 1, r18 // pass flag of istream, as a2
+ hw_rei_spe
+
+
+// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
+
+//+
+// INTERRUPT - offset 0100
+// Entry:
+// Vectored into via trap on hardware interrupt
+//
+// Function:
+// check for halt interrupt
+// check for passive release (current ipl geq requestor)
+// if necessary, switch to kernel mode
+// push stack frame, update ps (including current mode and ipl copies), sp, and gp
+// pass the interrupt info to the system module
+//
+//-
+
+
+ HDW_VECTOR(PAL_INTERRUPT_ENTRY)
+Trap_Interrupt:
+ mfpr r13, ev5__intid // Fetch level of interruptor
+ mfpr r25, ev5__isr // Fetch interrupt summary register
+
+ srl r25, isr_v_hlt, r9 // Get HLT bit
+ mfpr r14, ev5__ipl
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
+ blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
+
+ cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
+ bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
+
+ and r11, osfps_m_mode, r10 // get mode bit
+ beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
+
+ mtpr r30, pt_usp // save user stack
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_INTERRUPT_10_:
+ lda sp, (0-osfsf_c_size)(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r11, osfsf_ps(sp) // save ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // push gp
+ stq r16, osfsf_a0(sp) // a0
+
+// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r18, osfsf_a2(sp) // a2
+ subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
+
+ srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
+ subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
+
+ cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
+ bis r12, r31, r11 // set new ps
+
+ mfpr r12, pt_intmask
+ and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
+
+#ifdef SIMOS
+ /*
+ * Lance had space problems. We don't.
+ */
+ extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+ mfpr r29, pt_kgp // update gp
+ mtpr r14, ev5__ipl // load the new IPL into Ibox
+#else
+// Moved the following three lines to sys_interrupt to make room for debug
+// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+// mfpr r29, pt_kgp // update gp
+
+// mtpr r14, ev5__ipl // load the new IPL into Ibox
+#endif
+ br r31, sys_interrupt // Go handle interrupt
+
+
+
+// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
+
+//+
+// ITBMISS - offset 0180
+// Entry:
+// Vectored into via hardware trap on Istream translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//
+//-
+
+ HDW_VECTOR(PAL_ITB_MISS_ENTRY)
+Trap_Itbmiss:
+#if real_mm == 0
+
+
+ // Simple 1-1 va->pa mapping
+
+ nop // Pad to align to E1
+ mfpr r8, exc_addr
+
+ srl r8, page_offset_size_bits, r9
+ sll r9, 32, r9
+
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+ mtpr r9, itb_pte // E1
+
+ hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
+#else
+
+ // Real MM mapping
+ nop
+ mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
+
+ nop
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
+
+pal_itb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ mtpr r10, exc_addr // Restore exc_address if there was a trap.
+
+ mfpr r31, ev5__va // Unlock VA in case there was a double miss
+ nop
+
+ and r8, osfpte_m_foe, r25 // Look for FOE set.
+ blbc r8, invalid_ipte_handler // PTE not valid.
+
+ nop
+ bne r25, foe_ipte_handler // FOE is set
+
+ nop
+ mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
+
+ hw_rei_stall //
+
+#endif
+
+
+
+
+// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_SINGLE - offset 0200
+// Entry:
+// Vectored into via hardware trap on Dstream single translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//-
+
+ HDW_VECTOR(PAL_DTB_MISS_ENTRY)
+Trap_Dtbmiss_Single:
+#if real_mm == 0
+ // Simple 1-1 va->pa mapping
+ mfpr r8, va // E0
+ srl r8, page_offset_size_bits, r9
+
+ sll r9, 32, r9
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+
+ mtpr r9, dtb_pte // E0
+ nop // Pad to align to E0
+
+
+
+ mtpr r8, dtb_tag // E0
+ nop
+
+ nop // Pad tag write
+ nop
+
+ nop // Pad tag write
+ nop
+
+ hw_rei
+#else
+ mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
+
+// DEBUGSTORE(0x45)
+// DEBUG_EXC_ADDR()
+ // Real MM mapping
+ mfpr r9, ev5__mm_stat // Get read/write bit. E0.
+ mtpr r10, pt6 // Stash exc_addr away
+
+pal_dtb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ nop // Pad MF VA
+
+ mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
+ nop
+
+ mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
+ blbc r8, invalid_dpte_handler // Handle invalid PTE
+
+ mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
+ mfpr r10, pt6
+
+ // Following 2 instructions take 2 cycles
+ mtpr r10, exc_addr // Return linkage in case we trapped. E1.
+ mfpr r31, pt0 // Pad the write to dtb_tag
+
+ hw_rei // Done, return
+#endif
+
+
+
+
+// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_DOUBLE - offset 0280
+// Entry:
+// Vectored into via hardware trap on Double TBmiss from single miss flows.
+//
+// r8 - faulting VA
+// r9 - original MMstat
+// r10 - original exc_addr (both itb,dtb miss)
+// pt6 - original exc_addr (dtb miss flow only)
+// VA IPR - locked with original faulting VA
+//
+// Function:
+// Get PTE, if valid load TB and return.
+// If not valid then take TNV/ACV exception.
+//
+// pt4 and pt5 are reserved for this flow.
+//
+//
+//-
+
+ HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
+Trap_Dtbmiss_double:
+#if ldvpte_bug_fix != 0
+ mtpr r8, pt4 // save r8 to do exc_addr check
+ mfpr r8, exc_addr
+ blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
+ mfpr r8, pt4 // restore r8
+#endif
+ nop
+ mtpr r22, pt5 // Get some scratch space. E1.
+ // Due to virtual scheme, we can skip the first lookup and go
+ // right to fetch of level 2 PTE
+ sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ mtpr r21, pt4 // Get some scratch space. E1.
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ mfpr r21, pt_ptbr // Get physical address of the page table.
+
+ nop
+ addq r21, r22, r21 // Index into page table for level 2 PTE.
+
+ sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ blbc r21, double_pte_inv // Check for Invalid PTE.
+
+ srl r21, 32, r21 // extract PFN from PTE
+ sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
+
+ addq r21, r22, r21 // Index into page table for level 3 PTE.
+ nop
+
+ ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
+ blbc r21, double_pte_inv // Check for invalid PTE.
+
+ mtpr r21, ev5__dtb_pte // Write the PTE. E0.
+ mfpr r22, pt5 // Restore scratch register
+
+ mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
+ mfpr r21, pt4 // Restore scratch register
+
+ nop // Pad write to tag.
+ nop
+
+ nop // Pad write to tag.
+ nop
+
+ hw_rei
+
+
+
+// .sbttl "UNALIGN -- Dstream unalign trap"
+//+
+// UNALIGN - offset 0300
+// Entry:
+// Vectored into via hardware trap on unaligned Dstream reference.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- Opcode
+// a2 <- src/dst register number
+// vector via entUna
+//-
+
+ HDW_VECTOR(PAL_UNALIGN_ENTRY)
+Trap_Unalign:
+/* DEBUGSTORE(0x47)*/
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
+ mfpr r14, exc_addr // get pc
+
+ srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
+ blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
+
+ blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
+ // not set, must be a load
+ and r13, 0x1F, r8 // isolate ra
+
+ cmpeq r8, 0x1F, r8 // check for r31/F31
+ bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
+
+UNALIGN_NO_DISMISS:
+ bis r11, r31, r12 // Save PS
+ bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+UNALIGN_NO_DISMISS_10_:
+ mfpr r25, ev5__va // Unlock VA
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ mtpr r25, pt0 // Stash VA
+ stq r18, osfsf_a2(sp) // a2
+
+ stq r11, osfsf_ps(sp) // save old ps
+ srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
+
+ stq r29, osfsf_gp(sp) // save gp
+ addq r14, 4, r14 // inc PC past the ld/st
+
+ stq r17, osfsf_a1(sp) // a1
+ and r25, mm_stat_m_opcode, r17// Clean opocde for a1
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r16, pt0 // a0 <- va/unlock
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entuna // get entry point
+
+
+ bis r12, r31, r11 // update ps
+ br r31, unalign_trap_cont
+
+
+
+
+// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
+
+//+
+// DFAULT - offset 0380
+// Entry:
+// Vectored into via hardware trap on dstream fault or sign check error on DVA.
+//
+// Function:
+// Ignore faults on FETCH/FETCH_M
+// Check for DFAULT in PAL
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
+// a2 <- R/W
+// vector via entMM
+//
+//-
+ HDW_VECTOR(PAL_D_FAULT_ENTRY)
+Trap_Dfault:
+// DEBUGSTORE(0x48)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r13, ev5__mm_stat // Get mmstat
+ mfpr r8, exc_addr // get pc, preserve r14
+
+ srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
+ blbs r8, dfault_in_pal
+
+ bis r8, r31, r14 // move exc_addr to correct place
+ bis r11, r31, r12 // Save PS
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ and r9, mm_stat_m_opcode, r9 // Clean all but opcode
+
+ cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+ //dismiss exception if load to r31/f31
+ blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
+
+ and r9, 0x1F, r9 // isolate rnum
+ nop
+
+ cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+dfault_no_dismiss:
+ and r13, 0xf, r13 // Clean extra bits in mm_stat
+ bge r25, dfault_trap_cont // no stack swap needed if cm=kern
+
+
+ mtpr r30, pt_usp // save user stack
+ bis r31, r31, r12 // Set new PS
+
+ mfpr r30, pt_ksp
+ br r31, dfault_trap_cont
+
+
+
+
+
+// .sbttl "MCHK - Machine Check Trap Entry Point"
+
+//+
+// MCHK - offset 0400
+// Entry:
+// Vectored into via hardware trap on machine check.
+//
+// Function:
+//
+//-
+
+ HDW_VECTOR(PAL_MCHK_ENTRY)
+Trap_Mchk:
+ DEBUGSTORE(0x49)
+ mtpr r31, ic_flush_ctl // Flush the Icache
+ br r31, sys_machine_check
+
+
+
+
+// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
+
+//+
+// OPCDEC - offset 0480
+// Entry:
+// Vectored into via hardware trap on illegal opcode.
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_OPCDEC_ENTRY)
+Trap_Opcdec:
+ DEBUGSTORE(0x4a)
+//simos DEBUG_EXC_ADDR()
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_OPCDEC_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ addq r14, 4, r14 // inc pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r11, osfsf_ps(sp) // save old ps
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r29, osfsf_gp(sp) // save gp
+ stq r14, osfsf_pc(sp) // save pc
+
+ bis r12, r31, r11 // update ps
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei, E1
+
+ mfpr r29, pt_kgp // get the kgp, E1
+
+ hw_rei_spe // done, E1
+
+
+
+
+
+
+// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
+
+//+
+// ARITH - offset 0500
+// Entry:
+// Vectored into via hardware trap on arithmetic excpetion.
+//
+// Function:
+// Build stack frame
+// a0 <- exc_sum
+// a1 <- exc_mask
+// a2 <- unpred
+// vector via entArith
+//
+//-
+ HDW_VECTOR(PAL_ARITH_ENTRY)
+Trap_Arith:
+ DEBUGSTORE(0x4b)
+ and r11, osfps_m_mode, r12 // get mode bit
+ mfpr r31, ev5__va // unlock mbox
+
+ bis r11, r31, r25 // save ps
+ mfpr r14, exc_addr // get pc
+
+ nop
+ blbs r14, pal_pal_bug_check // arith trap from PAL
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ beq r12, TRAP_ARITH_10_ // if zero we are in kern now
+
+ bis r31, r31, r25 // set the new ps
+ mtpr r30, pt_usp // save user stack
+
+ nop
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ nop // Pad current mode write and stq
+ mfpr r13, ev5__exc_sum // get the exc_sum
+
+ mfpr r12, pt_entarith
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r17, osfsf_a1(sp)
+ mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
+
+ stq r11, osfsf_ps(sp) // save ps
+ bis r25, r31, r11 // set new ps
+
+ stq r16, osfsf_a0(sp) // save regs
+ srl r13, exc_sum_v_swc, r16// shift data to correct position
+
+ stq r18, osfsf_a2(sp)
+// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
+ mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
+
+ stq r29, osfsf_gp(sp)
+ mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
+
+ mfpr r29, pt_kgp // get the kern gp - E1
+ hw_rei_spe // done - E1
+
+
+
+
+
+
+// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
+
+//+
+// FEN - offset 0580
+// Entry:
+// Vectored into via hardware trap on illegal FP op.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_FEN_ENTRY)
+Trap_Fen:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ mfpr r13, ev5__icsr
+ nop
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_FEN_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
+
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r11, osfsf_ps(sp) // save old ps
+
+ stq r29, osfsf_gp(sp) // save gp
+ bis r12, r31, r11 // set new ps
+
+ stq r17, osfsf_a1(sp) // a1
+ blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
+
+ bis r31, osf_a0_fen, r16 // set a0
+ stq r14, osfsf_pc(sp) // save pc
+
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei -E1
+
+ mfpr r29, pt_kgp // get the kgp -E1
+
+ hw_rei_spe // done -E1
+
+// FEN trap was taken, but the fault is really opcdec.
+ ALIGN_BRANCH
+fen_to_opcdec:
+ addq r14, 4, r14 // save PC+4
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r14, osfsf_pc(sp) // save pc
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+ hw_rei_spe // done
+
+
+
+// .sbttl "Misc handlers"
+ // Start area for misc code.
+//+
+//dfault_trap_cont
+// A dfault trap has been taken. The sp has been updated if necessary.
+// Push a stack frame a vector via entMM.
+//
+// Current state:
+// r12 - new PS
+// r13 - MMstat
+// VA - locked
+//
+//-
+ ALIGN_BLOCK
+dfault_trap_cont:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r25, ev5__va // Fetch VA/unlock
+
+ stq r18, osfsf_a2(sp) // a2
+ and r13, 1, r18 // Clean r/w bit for a2
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r25, r31, r16 // a0 <- va
+
+ stq r17, osfsf_a1(sp) // a1
+ srl r13, 1, r17 // shift fault bits to right position
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entmm // get entry point
+
+ stq r29, osfsf_gp(sp) // save gp
+ cmovlbs r17, 1, r17 // a2. acv overrides fox.
+
+ mtpr r25, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ hw_rei_spe // done
+
+//+
+//unalign_trap_cont
+// An unalign trap has been taken. Just need to finish up a few things.
+//
+// Current state:
+// r25 - entUna
+// r13 - shifted MMstat
+//
+//-
+ ALIGN_BLOCK
+unalign_trap_cont:
+ mtpr r25, exc_addr // load exc_addr with entUna
+ // 1 cycle to hw_rei
+
+
+ mfpr r29, pt_kgp // get the kgp
+ and r13, mm_stat_m_ra, r18 // Clean Ra for a2
+
+ hw_rei_spe // done
+
+
+
+//+
+// dfault_in_pal
+// Dfault trap was taken, exc_addr points to a PAL PC.
+// r9 - mmstat<opcode> right justified
+// r8 - exception address
+//
+// These are the cases:
+// opcode was STQ -- from a stack builder, KSP not valid halt
+// r14 - original exc_addr
+// r11 - original PS
+// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
+// KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
+// r10 - original exc_addr
+// r11 - original PS
+//
+//
+//-
+ ALIGN_BLOCK
+dfault_in_pal:
+ DEBUGSTORE(0x50)
+ bic r8, 3, r8 // Clean PC
+ mfpr r9, pal_base
+
+ mfpr r31, va // unlock VA
+#if real_mm != 0
+ // if not real_mm, should never get here from miss flows
+
+ subq r9, r8, r8 // pal_base - offset
+
+ lda r9, pal_itb_ldq-pal_base(r8)
+ nop
+
+ beq r9, dfault_do_bugcheck
+ lda r9, pal_dtb_ldq-pal_base(r8)
+
+ beq r9, dfault_do_bugcheck
+#endif
+
+//
+// KSP invalid halt case --
+ksp_inval_halt:
+ DEBUGSTORE(76)
+ bic r11, osfps_m_mode, r11 // set ps to kernel mode
+ mtpr r0, pt0
+
+ mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
+ mtpr r31, ips
+
+ mtpr r14, exc_addr // Set PC to instruction that caused trouble
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+
+ lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
+ br r31, sys_enter_console // enter the console
+
+ ALIGN_BRANCH
+dfault_do_bugcheck:
+ bis r10, r31, r14 // bugcheck expects exc_addr in r14
+ br r31, pal_pal_bug_check
+
+
+ ALIGN_BLOCK
+//+
+// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
+// On entry -
+// r14 - exc_addr
+// VA is locked
+//
+//-
+dfault_fetch_ldr31_err:
+ mtpr r11, ev5__dtb_cm
+ mtpr r11, ev5__ps // Make sure ps hasn't changed
+
+ mfpr r31, va // unlock the mbox
+ addq r14, 4, r14 // inc the pc to skip the fetch
+
+ mtpr r14, exc_addr // give ibox new PC
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei
+
+
+
+ ALIGN_BLOCK
+//+
+// sys_from_kern
+// callsys from kernel mode - OS bugcheck machine check
+//
+//-
+sys_from_kern:
+ mfpr r14, exc_addr // PC points to call_pal
+ subq r14, 4, r14
+
+ lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
+ br r31, pal_pal_mchk
+
+
+// .sbttl "Continuation of long call_pal flows"
+ ALIGN_BLOCK
+//+
+// wrent_tbl
+// Table to write *int in paltemps.
+// 4 instructions/entry
+// r16 has new value
+//
+//-
+wrent_tbl:
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entint
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entarith
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entmm
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entif
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entuna
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entsys
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// tbi_tbl
+// Table to do tbi instructions
+// 4 instructions per entry
+//-
+tbi_tbl:
+ // -2 tbia
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_ia // Flush DTB
+ mtpr r31, ev5__itb_ia // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+ // -1 tbiap
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_iap // Flush DTB
+ mtpr r31, ev5__itb_iap // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+
+ // 0 unused
+//orig pvc_jsr tbi, dest=1
+ hw_rei // Pad table
+ nop
+ nop
+ nop
+
+
+ // 1 tbisi
+//orig pvc_jsr tbi, dest=1
+#if icflush_on_tbix != 0
+
+
+
+ nop
+ br r31, pal_ic_flush_and_tbisi // Flush Icache
+ nop
+ nop // Pad table
+#else
+
+ nop
+ nop
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ // 2 tbisd
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB.
+ nop
+
+ nop
+ hw_rei_stall
+
+
+ // 3 tbis
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
+#else
+ br r31, tbi_finish
+ ALIGN_BRANCH
+tbi_finish:
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ ALIGN_BLOCK
+//+
+// bpt_bchk_common:
+// Finish up the bpt/bchk instructions
+//-
+bpt_bchk_common:
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_user
+// Finish up the rti instruction
+//-
+rti_to_user:
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mfpr r30, pt_usp
+ hw_rei_spe // and back
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_kern
+// Finish up the rti instruction
+//-
+rti_to_kern:
+ and r12, osfps_m_ipl, r11 // clean ps
+ mfpr r12, pt_intmask // get int mask
+
+ extbl r12, r11, r12 // get mask for this ipl
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mtpr r12, ev5__ipl // set the new ipl.
+ or r25, r31, sp // sp
+
+// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// swpctx_cont
+// Finish up the swpctx instruction
+//-
+
+swpctx_cont:
+#if ev5_p1 != 0
+
+
+ bic r25, r24, r25 // clean icsr<FPE>
+ get_impure r8 // get impure pointer
+
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+ fix_impure_ipr r8 // adjust impure pointer
+
+ restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
+ srl r23, 32, r24 // move asn to low asn pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ sll r24, itb_asn_v_asn, r12
+
+#else
+
+ bic r25, r24, r25 // clean icsr<FPE,PMP>
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ srl r23, 32, r24 // move asn to low asn pos
+
+ and r22, 1, r22
+ sll r24, itb_asn_v_asn, r12
+
+ sll r22, icsr_v_pmp, r22
+ nop
+
+ or r25, r22, r25 // icsr with new pme
+#endif
+
+ sll r24, dtb_asn_v_asn, r24
+
+ subl r23, r13, r13 // gen new cc offset
+ mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
+
+ mtpr r24, dtb_asn // Load up new ASN
+ mtpr r25, icsr // write the icsr
+
+ sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
+ ldqp r25, osfpcb_q_usp(r16) // get new usp
+
+ insll r13, 4, r13 // >> 32
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r14, pt_ptbr // load the new ptbr
+
+ mtpr r13, cc // set new offset
+ ldqp r30, osfpcb_q_ksp(r16) // get new ksp
+
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r25, pt_usp // save usp
+
+#if ev5_p1 != 0
+
+
+ blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
+
+ // otherwise, monitoring select processes - update pm
+ lda r25, 0x3F(r31)
+ cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
+
+ sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
+ mfpr r22, ev5__pmctr
+
+ and r8, r25, r8 // mask new ctl value
+ bic r22, r25, r22 // clear ctl field in pmctr
+
+ or r8, r22, r8
+ mtpr r8, ev5__pmctr
+
+no_pm_change:
+#endif
+
+
+#if osf_chm_fix != 0
+
+
+ p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
+
+#if build_fixed_image != 0
+
+
+ hw_rei_stall
+#else
+
+ mfpr r9, pt_pcbb // get FEN
+#endif
+
+ ldqp r9, osfpcb_q_fen(r9)
+ blbc r9, no_pm_change_10_ // skip if FEN disabled
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31)
+ mtpr r12, dc_mode // turn dcache on so we can flush it
+ nop // force correct slotting
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+
+ lda r8, 0(r31) // flood the dcache with junk data
+no_pm_change_5_: ldqp r31, 0(r8)
+ lda r8, 0x20(r8) // touch each cache block
+ srl r8, 13, r9
+ blbc r9, no_pm_change_5_
+
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn the dcache back off
+ nop // force correct slotting
+ mfpr r31, pt0 // no hw_rei_stall in 0,1
+#endif
+
+
+no_pm_change_10_: hw_rei_stall // back we go
+
+ ALIGN_BLOCK
+//+
+// swppal_cont - finish up the swppal call_pal
+//-
+
+swppal_cont:
+ mfpr r2, pt_misc // get misc bits
+ sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
+ or r2, r0, r2 // set the bit
+ mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
+ mtpr r2, pt_misc // update the chip
+
+ or r3, r31, r4
+ mfpr r3, pt_impure // pass pointer to the impure area in r3
+//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
+//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
+//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
+//orig unfix_impure_ipr r3 // restore impure pointer
+ lda r3, CNS_Q_IPR(r3)
+ RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
+ RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
+ lda r3, -CNS_Q_IPR(r3)
+
+ or r31, r31, r0 // set status to success
+// pvc_violate 1007
+ jmp r31, (r4) // and call our friend, it's her problem now
+
+
+swppal_fail:
+ addq r0, 1, r0 // set unknown pal or not loaded
+ hw_rei // and return
+
+
+// .sbttl "Memory management"
+
+ ALIGN_BLOCK
+//+
+//foe_ipte_handler
+// IFOE detected on level 3 pte, sort out FOE vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV vs FOE. Build stack and dispatch
+// Will not be here if TNV.
+//-
+
+foe_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ lda r17, mmcsr_c_acv(r31) // assume ACV
+
+ stq r16, osfsf_pc(sp) // save pc
+ cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+ ALIGN_BLOCK
+//+
+//invalid_ipte_handler
+// TNV detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch.
+//-
+
+invalid_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ and r25, 1, r17 // Isolate kre
+
+ stq r16, osfsf_pc(sp) // save pc
+ xor r17, 1, r17 // map to acv/tnv as a1
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+
+
+
+ ALIGN_BLOCK
+//+
+//invalid_dpte_handler
+// INVALID detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R10 = va
+// R8 = pte
+// R9 = mm_stat
+// PT6 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch
+//-
+
+
+invalid_dpte_handler:
+ mfpr r12, pt6
+ blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
+
+ bis r12, r31, r14 // save PC in case of tbmiss or fault
+ srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
+
+ mtpr r11, pt0 // Save PS for stack write
+ and r25, mm_stat_m_opcode, r25 // isolate opcode
+
+ cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
+ blbs r25, nmiss_fetch_ldr31_err // yes
+
+ //dismiss exception if load to r31/f31
+ blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
+
+ and r25, 0x1F, r25 // isolate rnum
+ nop
+
+ cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
+ bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
+
+invalid_dpte_no_dismiss:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r25 // Save va in case TBmiss on stack
+ and r9, 1, r13 // save r/w flag
+
+ stq r16, osfsf_a0(sp) // a0
+ or r25, r31, r16 // pass va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // assume acv
+
+ srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
+ stq r29, osfsf_gp(sp)
+
+ stq r18, osfsf_a2(sp) // a2
+ cmovlbs r13, r25, r12 // if write access move acv based on write enable
+
+ or r13, r31, r18 // pass flag of dstream access and read vs write
+ mfpr r25, pt0 // get ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r13, pt_entmm // get entry point
+
+ stq r25, osfsf_ps(sp) // save ps
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
+
+ hw_rei_spe // out to exec
+
+//+
+//
+// We come here if we are erring on a dtb_miss, and the instr is a
+// fetch, fetch_m, of load to r31/f31.
+// The PC is incremented, and we return to the program.
+// essentially ignoring the instruction and error.
+//
+//-
+ ALIGN_BLOCK
+nmiss_fetch_ldr31_err:
+ mfpr r12, pt6
+ addq r12, 4, r12 // bump pc to pc+4
+
+ mtpr r12, exc_addr // and set entry point
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei //
+
+ ALIGN_BLOCK
+//+
+// double_pte_inv
+// We had a single tbmiss which turned into a double tbmiss which found
+// an invalid PTE. Return to single miss with a fake pte, and the invalid
+// single miss flow will report the error.
+//
+// on entry:
+// r21 PTE
+// r22 available
+// VA IPR locked with original fault VA
+// pt4 saved r21
+// pt5 saved r22
+// pt6 original exc_addr
+//
+// on return to tbmiss flow:
+// r8 fake PTE
+//
+//
+//-
+double_pte_inv:
+ srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
+ mfpr r22, exc_addr // get the pc
+
+ lda r22, 4(r22) // inc the pc
+ lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
+
+ cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
+ mtpr r22, exc_addr // set for rei
+
+ mfpr r21, pt4 // restore regs
+ mfpr r22, pt5 // restore regs
+
+ hw_rei // back to tb miss
+
+ ALIGN_BLOCK
+//+
+//tnv_in_pal
+// The only places in pal that ld or store are the
+// stack builders, rti or retsys. Any of these mean we
+// need to take a ksp not valid halt.
+//
+//-
+tnv_in_pal:
+
+
+ br r31, ksp_inval_halt
+
+
+// .sbttl "Icache flush routines"
+
+ ALIGN_BLOCK
+//+
+// Common Icache flush routine.
+//
+//
+//-
+pal_ic_flush:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+ nop
+ nop
+
+one_cycle_and_hw_rei:
+ nop
+ nop
+
+ hw_rei_stall
+
+#if icflush_on_tbix != 0
+
+
+ ALIGN_BLOCK
+
+//+
+// Common Icache flush and ITB invalidate single routine.
+// ITBIS and hw_rei_stall must be in same octaword.
+// r17 - has address to invalidate
+//
+//-
+PAL_IC_FLUSH_AND_TBISI:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+
+ nop
+ nop
+
+ nop
+ nop
+
+ // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
+ // 44 nops plus 4 instructions before it is 48 instructions.
+ // Since this routine started on a 32-byte (8 instruction) boundary,
+ // the following 2 instructions will be in the same octword as required.
+// ALIGN_BRANCH
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+
+#endif
+
+ ALIGN_BLOCK
+//+
+//osfpal_calpal_opcdec
+// Here for all opcdec CALL_PALs
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+osfpal_calpal_opcdec:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ nop
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+osfpal_calpal_opcdec_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ nop
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r14, osfsf_pc(sp) // save pc
+ nop
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+
+
+
+//+
+//pal_update_pcb
+// Update the PCB with the current SP, AST, and CC info
+//
+// r0 - return linkage
+//-
+ ALIGN_BLOCK
+
+pal_update_pcb:
+ mfpr r12, pt_pcbb // get pcbb
+ and r11, osfps_m_mode, r25 // get mode
+ beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
+ mtpr r30, pt_usp // save user stack
+ stqp r30, osfpcb_q_usp(r12) // store usp
+ br r31, pal_update_pcb_20_ // join common
+pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
+pal_update_pcb_20_: rpcc r13 // get cyccounter
+ srl r13, 32, r14 // move offset
+ addl r13, r14, r14 // merge for new time
+ stlp r14, osfpcb_l_cc(r12) // save time
+
+//orig pvc_jsr updpcb, bsr=1, dest=1
+ ret r31, (r0)
+
+
+
+#if remove_save_state == 0
+
+// .sbttl "PAL_SAVE_STATE"
+//+
+//
+// Pal_save_state
+//
+// Function
+// All chip state saved, all PT's, SR's FR's, IPR's
+//
+//
+// Regs' on entry...
+//
+// R0 = halt code
+// pt0 = r0
+// R1 = pointer to impure
+// pt4 = r1
+// R3 = return addr
+// pt5 = r3
+//
+// register usage:
+// r0 = halt_code
+// r1 = addr of impure area
+// r3 = return_address
+// r4 = scratch
+//
+//-
+
+
+ ALIGN_BLOCK
+ .globl pal_save_state
+pal_save_state:
+//
+//
+// start of implementation independent save routine
+//
+// the impure area is larger than the addressibility of hw_ld and hw_st
+// therefore, we need to play some games: The impure area
+// is informally divided into the "machine independent" part and the
+// "machine dependent" part. The state that will be saved in the
+// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
+// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
+// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
+// macros will automagically adjust the offset correctly.
+//
+
+// The distributed code is commented out and followed by corresponding SRC code.
+// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
+
+//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
+//orig store_reg1 hlt, r0, r1, ipr=1
+ SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
+
+ mfpr r0, pt0 // get r0 back //orig
+//orig store_reg1 0, r0, r1 // save r0
+ SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
+
+ mfpr r0, pt4 // get r1 back //orig
+//orig store_reg1 1, r0, r1 // save r1
+ SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
+
+//orig store_reg 2 // save r2
+ SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
+
+ mfpr r0, pt5 // get r3 back //orig
+//orig store_reg1 3, r0, r1 // save r3
+ SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
+
+ // reason code has been saved
+ // r0 has been saved
+ // r1 has been saved
+ // r2 has been saved
+ // r3 has been saved
+ // pt0, pt4, pt5 have been lost
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r2, icsr // Get icsr //orig
+//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r0, (1<<(icsr_v_sde-16))(r31)
+ bic r2, r0, r0 // ICSR with SDE clear //orig
+ mtpr r0, icsr // Turn off SDE //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+
+ // save integer regs R4-r31
+//orig #define t 4
+//orig .repeat 28
+//orig store_reg \t
+//orig #define t t + 1
+//orig .endr
+ SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+ // save all paltemp regs except pt0
+
+//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
+//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
+//orig #define t 1
+//orig .repeat 23
+//orig store_reg \t , pal=1
+//orig #define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore the impure base address.
+ lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
+ SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+ // Restore shadow mode
+ mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
+ mfpr r31, pt0 //orig
+ mtpr r2, icsr // Restore original ICSR //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+ // save all integer shadow regs
+
+//orig #define t 8
+//orig .repeat 7
+//orig store_reg \t, shadow=1
+//orig #define t t + 1
+//orig .endr
+//orig store_reg 25, shadow=1
+
+ SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+
+//orig store_reg exc_addr, ipr=1 // save ipr
+//orig store_reg pal_base, ipr=1 // save ipr
+//orig store_reg mm_stat, ipr=1 // save ipr
+//orig store_reg va, ipr=1 // save ipr
+//orig store_reg icsr, ipr=1 // save ipr
+//orig store_reg ipl, ipr=1 // save ipr
+//orig store_reg ps, ipr=1 // save ipr
+//orig store_reg itb_asn, ipr=1 // save ipr
+//orig store_reg aster, ipr=1 // save ipr
+//orig store_reg astrr, ipr=1 // save ipr
+//orig store_reg sirr, ipr=1 // save ipr
+//orig store_reg isr, ipr=1 // save ipr
+//orig store_reg ivptbr, ipr=1 // save ipr
+//orig store_reg mcsr, ipr=1 // save ipr
+//orig store_reg dc_mode, ipr=1 // save ipr
+
+ SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
+ SAVE_IPR(va,CNS_Q_VA,r1)
+ SAVE_IPR(icsr,CNS_Q_ICSR,r1)
+ SAVE_IPR(ipl,CNS_Q_IPL,r1)
+ SAVE_IPR(ips,CNS_Q_IPS,r1)
+ SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ SAVE_IPR(aster,CNS_Q_ASTER,r1)
+ SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
+ SAVE_IPR(sirr,CNS_Q_SIRR,r1)
+ SAVE_IPR(isr,CNS_Q_ISR,r1)
+ SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
+ SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
+//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
+//orig // PVC violation applies only to
+pvc$osf35$379: // loads. HW_ST ok here, so ignore
+ SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
+
+
+ //the following iprs are informational only -- will not be restored
+
+//orig store_reg icperr_stat, ipr=1
+//orig store_reg pmctr, ipr=1
+//orig store_reg intid, ipr=1
+//orig store_reg exc_sum, ipr=1
+//orig store_reg exc_mask, ipr=1
+//orig ldah r14, 0xfff0(r31)
+//orig zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig nop // pad mf dcperr_stat out of shadow of last store
+//orig nop
+//orig nop
+//orig store_reg dcperr_stat, ipr=1
+
+ SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
+ SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
+ SAVE_IPR(intId,CNS_Q_INT_ID,r1)
+ SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
+ SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
+ ldah r14, 0xFFF0(zero)
+ zap r14, 0xE0, r14 // Get base address of CBOX IPRs
+ NOP // Pad mfpr dcPerr out of shadow of
+ NOP // last store
+ NOP
+ SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
+
+ // read cbox ipr state
+
+//orig mb
+//orig ldqp r2, ev5__sc_ctl(r14)
+//orig ldqp r13, ld_lock(r14)
+//orig ldqp r4, ev5__sc_addr(r14)
+//orig ldqp r5, ev5__ei_addr(r14)
+//orig ldqp r6, ev5__bc_tag_addr(r14)
+//orig ldqp r7, ev5__fill_syn(r14)
+//orig bis r5, r4, r31
+//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
+//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
+//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
+//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
+//orig mb
+
+#ifndef SIMOS
+ mb
+ ldq_p r2, scCtl(r14)
+ ldq_p r13, ldLock(r14)
+ ldq_p r4, scAddr(r14)
+ ldq_p r5, eiAddr(r14)
+ ldq_p r6, bcTagAddr(r14)
+ ldq_p r7, fillSyn(r14)
+ bis r5, r4, zero // Make sure all loads complete before
+ bis r7, r6, zero // reading registers that unlock them.
+ ldq_p r8, scStat(r14) // Unlocks scAddr.
+ ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
+ ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
+ mb
+#endif
+//orig // save cbox ipr state
+//orig store_reg1 sc_ctl, r2, r1, ipr=1
+//orig store_reg1 ld_lock, r13, r1, ipr=1
+//orig store_reg1 sc_addr, r4, r1, ipr=1
+//orig store_reg1 ei_addr, r5, r1, ipr=1
+//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
+//orig store_reg1 fill_syn, r7, r1, ipr=1
+//orig store_reg1 sc_stat, r8, r1, ipr=1
+//orig store_reg1 ei_stat, r9, r1, ipr=1
+//orig //bc_config? sl_rcv?
+
+ SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
+ SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
+ SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
+ SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
+ SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
+ SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
+ SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
+ SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
+
+// restore impure base //orig
+//orig unfix_impure_ipr r1
+ lda r1, -CNS_Q_IPR(r1)
+
+// save all floating regs //orig
+ mfpr r0, icsr // get icsr //orig
+ or r31, 1, r2 // get a one //orig
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
+ sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
+ or r2, r0, r0 // set FEN on //orig
+ mtpr r0, icsr // write to icsr, enabling FEN //orig
+
+// map the save area virtually
+// orig mtpr r31, dtb_ia // clear the dtb
+// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+// orig sll r0, 32, r0 // shift to PFN field
+// orig lda r2, 0xff(r31) // all read enable and write enable bits set
+// orig sll r2, 8, r2 // move to PTE location
+// orig addq r0, r2, r0 // combine with PFN
+// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+// orig mtpr r1, dtb_tag // write TB tag
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too - in case the impure area crosses a page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag
+
+ lda r4, (1<<va_s_off)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+ sll r31, 0, r31 // stall cycle 1 // orig
+ sll r31, 0, r31 // stall cycle 2 // orig
+ sll r31, 0, r31 // stall cycle 3 // orig
+ nop // orig
+
+//orig // add offset for saving fpr regs
+//orig fix_impure_gpr r1
+
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+// now save the regs - F0-F31
+
+//orig #define t 0
+//orig .repeat 32
+//orig store_reg \t , fpu=1
+//orig #define t t + 1
+//orig .endr
+
+ mf_fpcr f0 // original
+
+ SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig //switch impure offset from gpr to ipr---
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig store_reg1 fpcsr, f0, r1, fpcsr=1
+
+ SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
+ lda r1, -0x200(r1) // Restore the impure base address
+
+//orig // and back to gpr ---
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+
+//orig lda r0, cns_mchksize(r31) // get size of mchk area
+//orig store_reg1 mchkflag, r0, r1, ipr=1
+//orig mb
+
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
+ // save this using the IPR base (it is closer) not the GRP base as they used...pb
+ lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
+ SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
+ mb
+
+//orig or r31, 1, r0 // get a one
+//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
+//orig mb
+
+ lda r1, -CNS_Q_IPR(r1) // back to the base
+ lda r1, 0x200(r1) // Point to center of CPU segment
+ or r31, 1, r0 // get a one
+ SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
+ mb
+
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+ lda r1, -0x200(r1) // Point to center of CPU segment
+
+ mtpr r31, dtb_ia // clear the dtb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr savsta, bsr=1, dest=1
+ ret r31, (r3) // and back we go
+#endif
+
+
+#if remove_restore_state == 0
+
+
+// .sbttl "PAL_RESTORE_STATE"
+//+
+//
+// Pal_restore_state
+//
+//
+// register usage:
+// r1 = addr of impure area
+// r3 = return_address
+// all other regs are scratchable, as they are about to
+// be reloaded from ram.
+//
+// Function:
+// All chip state restored, all SRs, FRs, PTs, IPRs
+// *** except R1, R3, PT0, PT4, PT5 ***
+//
+//-
+ ALIGN_BLOCK
+pal_restore_state:
+
+//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
+
+//orig // map the console io area virtually
+//orig mtpr r31, dtb_ia // clear the dtb
+//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r1, dtb_tag // write TB tag
+//orig
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too, in case impure area crosses page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
+
+ lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+//orig // save all floating regs
+//orig mfpr r0, icsr // get icsr
+//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
+//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
+//orig or r2, r0, r0 // set FEN on
+//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
+
+ mfpr r0, icsr // Get current ICSR
+ bis zero, 1, r2 // Get a '1'
+ or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
+ sll r2, icsr_v_fpe, r2 // Shift bits into position
+ bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
+ mtpr r0, icsr // Update the chip
+
+ mfpr r31, pt0 // FPE bubble cycle 1 //orig
+ mfpr r31, pt0 // FPE bubble cycle 2 //orig
+ mfpr r31, pt0 // FPE bubble cycle 3 //orig
+
+//orig fix_impure_ipr r1
+//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
+//orig mt_fpcr f0
+//orig
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
+//orig
+//orig // restore all floating regs
+//orig#define t 0
+//orig .repeat 32
+//orig restore_reg \t , fpu=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, 200(r1) // Point to base of IPR area again
+ RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
+ mt_fpcr f0 // original
+
+ lda r1, 0x200(r1) // point to center of CPU segment
+ RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig
+//orig // restore all pal regs
+//orig#define t 1
+//orig .repeat 23
+//orig restore_reg \t , pal=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore base address of impure area.
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
+ RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+
+//orig restore_reg exc_addr, ipr=1 // restore ipr
+//orig restore_reg pal_base, ipr=1 // restore ipr
+//orig restore_reg ipl, ipr=1 // restore ipr
+//orig restore_reg ps, ipr=1 // restore ipr
+//orig mtpr r0, dtb_cm // set current mode in mbox too
+//orig restore_reg itb_asn, ipr=1
+//orig srl r0, itb_asn_v_asn, r0
+//orig sll r0, dtb_asn_v_asn, r0
+//orig mtpr r0, dtb_asn // set ASN in Mbox too
+//orig restore_reg ivptbr, ipr=1
+//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
+//orig restore_reg mcsr, ipr=1
+//orig restore_reg aster, ipr=1
+//orig restore_reg astrr, ipr=1
+//orig restore_reg sirr, ipr=1
+//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
+//orig mfpr r31, pt0 // (may issue with mt maf_mode)
+//orig mfpr r31, pt0 // bubble cycle 1
+//orig mfpr r31, pt0 // bubble cycle 2
+//orig mfpr r31, pt0 // bubble cycle 3
+//orig mfpr r31, pt0 // (may issue with following ld)
+
+ // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
+ RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ RESTORE_IPR(ipl,CNS_Q_IPL,r1)
+ RESTORE_IPR(ips,CNS_Q_IPS,r1)
+ mtpr r0, dtbCm // Set Mbox current mode too.
+ RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ srl r0, 4, r0
+ sll r0, 57, r0
+ mtpr r0, dtbAsn // Set Mbox ASN too
+ RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ mtpr r0, mVptBr // Set Mbox VptBr too
+ RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
+ RESTORE_IPR(aster,CNS_Q_ASTER,r1)
+ RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
+ RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
+ RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
+ STALL
+ STALL
+ STALL
+ STALL
+ STALL
+
+
+ // restore all integer shadow regs
+//orig#define t 8
+//orig .repeat 7
+//orig restore_reg \t, shadow=1
+//orig#define t t + 1
+//orig .endr
+//orig restore_reg 25, shadow=1
+//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
+
+ RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+ RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
+ mfpr r31, pt0 // "" //orig
+ mfpr r0, icsr // Get icsr //orig
+//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
+ bic r0, r2, r2 // ICSR with SDE clear //orig
+ mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+//orig // switch impure pointer from ipr to gpr area --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig // restore all integer regs
+//orig#define t 4
+//orig .repeat 28
+//orig restore_reg \t
+//orig#define t t + 1
+//orig .endr
+
+// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
+
+ lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+ RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
+
+ lda t0, -0x200(t0) // Restore base address of impure area.
+ lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
+ RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
+
+//orig // and back again --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
+//orig mb
+
+ lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
+ lda t0, 0x200(t0) // and back to center of CPU segment
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
+ mb
+
+//orig // and back we go
+//orig// restore_reg 3
+//orig restore_reg 2
+//orig// restore_reg 1
+//orig restore_reg 0
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+
+ RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
+ RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
+ lda r1, -0x200(r1) // Restore impure base address
+
+ mfpr r31, pt0 // stall for ldqp above //orig
+
+ mtpr r31, dtb_ia // clear the tb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr rststa, bsr=1, dest=1
+ ret r31, (r3) // back we go //orig
+#endif
+
+
+//+
+// pal_pal_bug_check -- code has found a bugcheck situation.
+// Set things up and join common machine check flow.
+//
+// Input:
+// r14 - exc_addr
+//
+// On exit:
+// pt0 - saved r0
+// pt1 - saved r1
+// pt4 - saved r4
+// pt5 - saved r5
+// pt6 - saved r6
+// pt10 - saved exc_addr
+// pt_misc<47:32> - mchk code
+// pt_misc<31:16> - scb vector
+// r14 - base of Cbox IPRs in IO space
+// MCES<mchk> is set
+//-
+
+ ALIGN_BLOCK
+ .globl pal_pal_bug_check_from_int
+pal_pal_bug_check_from_int:
+ DEBUGSTORE(0x79)
+//simos DEBUG_EXC_ADDR()
+ DEBUGSTORE(0x20)
+//simos bsr r25, put_hex
+ lda r25, mchk_c_bugcheck(r31)
+ addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
+ br r31, pal_pal_mchk
+ nop
+
+pal_pal_bug_check:
+ lda r25, mchk_c_bugcheck(r31)
+
+pal_pal_mchk:
+ sll r25, 32, r25 // Move mchk code to position
+
+ mtpr r14, pt10 // Stash exc_addr
+ mtpr r14, exc_addr
+
+ mfpr r12, pt_misc // Get MCES and scratch
+ zap r12, 0x3c, r12
+
+ or r12, r25, r12 // Combine mchk code
+ lda r25, scb_v_procmchk(r31) // Get SCB vector
+
+ sll r25, 16, r25 // Move SCBv to position
+ or r12, r25, r25 // Combine SCBv
+
+ mtpr r0, pt0 // Stash for scratch
+ bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
+
+ mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
+ ldah r14, 0xfff0(r31)
+
+ mtpr r1, pt1 // Stash for scratch
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+
+ mtpr r4, pt4
+ mtpr r5, pt5
+
+ mtpr r6, pt6
+ blbs r12, sys_double_machine_check // MCHK halt if double machine check
+
+ br r31, sys_mchk_collect_iprs // Join common machine check flow
+
+// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
+
+// .sbttl "HALT - PALcode for HALT instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// GO to console code
+//
+//-
+
+ .text 1
+// . = 0x2000
+ CALL_PAL_PRIV(PAL_HALT_ENTRY)
+call_pal_halt:
+#if rax_mode == 0
+ mfpr r31, pt0 // Pad exc_addr read
+ mfpr r31, pt0
+
+ mfpr r12, exc_addr // get PC
+ subq r12, 4, r12 // Point to the HALT
+
+ mtpr r12, exc_addr
+ mtpr r0, pt0
+
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+ lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
+ br r31, sys_enter_console // enter the console
+
+#else // RAX mode
+ mb
+ mb
+ mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
+ mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
+ mtpr r8, exc_addr // no HW_REI for 1 cycle.
+ blbc r9, not_begin_case
+ mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
+ mtpr r31, ev5__itb_ia // clear ITB.
+
+not_begin_case:
+ nop
+ nop
+
+ nop
+ nop // pad mt itb_asn ->hw_rei_stall
+
+ hw_rei_stall
+#endif
+
+// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// R16 - contains the PFN of the page to be flushed
+//
+// Function:
+// Flush all Dstream caches of 1 entire page
+// The CFLUSH routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
+Call_Pal_Cflush:
+ br r31, sys_cflush
+
+// .sbttl "DRAINA - PALcode for DRAINA instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Implicit TRAPB performed by hardware.
+//
+// Function:
+// Stall instruction issue until all prior instructions are guaranteed to
+// complete without incurring aborts. For the EV5 implementation, this
+// means waiting until all pending DREADS are returned.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
+Call_Pal_Draina:
+ ldah r14, 0x100(r31) // Init counter. Value?
+ nop
+
+DRAINA_LOOP:
+ subq r14, 1, r14 // Decrement counter
+ mfpr r13, ev5__maf_mode // Fetch status bit
+
+ srl r13, maf_mode_v_dread_pending, r13
+ ble r14, DRAINA_LOOP_TOO_LONG
+
+ nop
+ blbs r13, DRAINA_LOOP // Wait until all DREADS clear
+
+ hw_rei
+
+DRAINA_LOOP_TOO_LONG:
+ br r31, call_pal_halt
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0003)
+CallPal_OpcDec03:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0004)
+CallPal_OpcDec04:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0005)
+CallPal_OpcDec05:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0006)
+CallPal_OpcDec06:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0007)
+CallPal_OpcDec07:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0008)
+CallPal_OpcDec08:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "CSERVE- PALcode for CSERVE instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Various functions for private use of console software
+//
+// option selector in r0
+// arguments in r16....
+// The CSERVE routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
+Call_Pal_Cserve:
+ br r31, sys_cserve
+
+// .sbttl "swppal - PALcode for swppal instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Vectored into via hardware PALcode instruction dispatch.
+// R16 contains the new PAL identifier
+// R17:R21 contain implementation-specific entry parameters
+//
+// R0 receives status:
+// 0 success (PAL was switched)
+// 1 unknown PAL variant
+// 2 known PAL variant, but PAL not loaded
+//
+//
+// Function:
+// Swap control to another PAL.
+//-
+
+ CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
+Call_Pal_Swppal:
+ cmpule r16, 255, r0 // see if a kibble was passed
+ cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
+
+ or r16, r31, r3 // set r3 incase this is a address
+ blbc r0, swppal_cont // nope, try it as an address
+
+ cmpeq r16, 2, r0 // is it our friend OSF?
+ blbc r0, swppal_fail // nope, don't know this fellow
+
+ br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
+
+// .global osfpal_hw_entry_reset
+// .weak osfpal_hw_entry_reset
+// .long <osfpal_hw_entry_reset-pal_start>
+//orig halt // don't know how to get the address here - kludge ok, load pal at 0
+ .long 0 // ?? hack upon hack...pb
+
+CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
+// ble r3, swppal_fail ; if OSF not linked in say not loaded.
+ mfpr r2, pal_base // fetch pal base
+
+ addq r2, r3, r3 // add pal base
+ lda r2, 0x3FFF(r31) // get pal base checker mask
+
+ and r3, r2, r2 // any funky bits set?
+ cmpeq r2, 0, r0 //
+
+ blbc r0, swppal_fail // return unknown if bad bit set.
+ br r31, swppal_cont
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000B)
+CallPal_OpcDec0B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000C)
+CallPal_OpcDec0C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wripir- PALcode for wripir instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// r16 = processor number to interrupt
+//
+// Function:
+// IPIR <- R16
+// Handled in system-specific code
+//
+// Exit:
+// interprocessor interrupt is recorded on the target processor
+// and is initiated when the proper enabling conditions are present.
+//-
+
+ CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
+Call_Pal_Wrpir:
+ br r31, sys_wripir
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000E)
+CallPal_OpcDec0E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000F)
+CallPal_OpcDec0F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdmces- PALcode for rdmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// R0 <- ZEXT(MCES)
+//-
+
+ CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
+Call_Pal_Rdmces:
+ mfpr r0, pt_mces // Read from PALtemp
+ and r0, mces_m_all, r0 // Clear other bits
+
+ hw_rei
+
+// .sbttl "wrmces- PALcode for wrmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
+// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
+// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
+// MCES<3> <- R16<3> (DPC)
+// MCES<4> <- R16<4> (DSC)
+//
+//-
+
+ CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
+Call_Pal_Wrmces:
+ and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
+ mfpr r14, pt_mces // Get current value
+
+ ornot r31, r13, r13 // Flip all the bits
+ and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
+
+ and r14, r13, r1 // Update MCHK, SCE, PCE
+ bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
+
+ or r1, r17, r1 // Update DPC and DSC
+ mtpr r1, pt_mces // Write MCES back
+
+#if rawhide_system == 0
+ nop // Pad to fix PT write->read restriction
+#else
+ blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
+#endif
+
+ nop
+ hw_rei
+
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0012)
+CallPal_OpcDec12:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0013)
+CallPal_OpcDec13:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0014)
+CallPal_OpcDec14:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0015)
+CallPal_OpcDec15:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0016)
+CallPal_OpcDec16:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0017)
+CallPal_OpcDec17:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0018)
+CallPal_OpcDec18:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0019)
+CallPal_OpcDec19:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001A)
+CallPal_OpcDec1A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001B)
+CallPal_OpcDec1B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001C)
+CallPal_OpcDec1C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001D)
+CallPal_OpcDec1D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001E)
+CallPal_OpcDec1E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001F)
+CallPal_OpcDec1F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0020)
+CallPal_OpcDec20:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0021)
+CallPal_OpcDec21:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0022)
+CallPal_OpcDec22:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0023)
+CallPal_OpcDec23:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0024)
+CallPal_OpcDec24:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0025)
+CallPal_OpcDec25:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0026)
+CallPal_OpcDec26:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0027)
+CallPal_OpcDec27:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0028)
+CallPal_OpcDec28:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0029)
+CallPal_OpcDec29:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002A)
+CallPal_OpcDec2A:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrfen - PALcode for wrfen instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// a0<0> -> ICSR<FPE>
+// Store new FEN in PCB
+// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
+//
+// Issue: What about pending FP loads when FEN goes from on->off????
+//-
+
+ CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
+Call_Pal_Wrfen:
+ or r31, 1, r13 // Get a one
+ mfpr r1, ev5__icsr // Get current FPE
+
+ sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
+ and r16, 1, r16 // clean new fen
+
+ sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
+ bic r1, r13, r1 // zero icsr<fpe>
+
+ or r1, r12, r1 // Or new FEN into ICSR
+ mfpr r12, pt_pcbb // Get PCBB - E1
+
+ mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
+ stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
+
+ mfpr r31, pt0 // Pad ICSR<FPE> write.
+ mfpr r31, pt0
+
+ mfpr r31, pt0
+// pvc_violate 225 // cuz PVC can't distinguish which bits changed
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x002C)
+CallPal_OpcDec2C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// vptptr <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
+Call_Pal_Wrvptptr:
+ mtpr r16, ev5__mvptbr // Load Mbox copy
+ mtpr r16, ev5__ivptbr // Load Ibox copy
+ nop // Pad IPR write
+ nop
+ hw_rei
+
+ CALL_PAL_PRIV(0x002E)
+CallPal_OpcDec2E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002F)
+CallPal_OpcDec2F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "swpctx- PALcode for swpctx instruction"
+
+//+
+//
+// Entry:
+// hardware dispatch via callPal instruction
+// R16 -> new pcb
+//
+// Function:
+// dynamic state moved to old pcb
+// new state loaded from new pcb
+// pcbb pointer set
+// old pcbb returned in R0
+//
+// Note: need to add perf monitor stuff
+//-
+
+ CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
+Call_Pal_Swpctx:
+ rpcc r13 // get cyccounter
+ mfpr r0, pt_pcbb // get pcbb
+
+ ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
+ ldqp r23, osfpcb_l_cc(r16) // get new asn
+
+ srl r13, 32, r25 // move offset
+ mfpr r24, pt_usp // get usp
+
+ stqp r30, osfpcb_q_ksp(r0) // store old ksp
+// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
+ mtpr r16, pt_pcbb // set new pcbb
+
+ stqp r24, osfpcb_q_usp(r0) // store usp
+ addl r13, r25, r25 // merge for new time
+
+ stlp r25, osfpcb_l_cc(r0) // save time
+ ldah r24, (1<<(icsr_v_fpe-16))(r31)
+
+ and r22, 1, r12 // isolate fen
+ mfpr r25, icsr // get current icsr
+
+ ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
+ br r31, swpctx_cont
+
+// .sbttl "wrval - PALcode for wrval instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// sysvalue <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
+Call_Pal_Wrval:
+ nop
+ mtpr r16, pt_sysval // Pad paltemp write
+ nop
+ nop
+ hw_rei
+
+
+// .sbttl "rdval - PALcode for rdval instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- sysvalue
+//-
+
+ CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
+Call_Pal_Rdval:
+ nop
+ mfpr r0, pt_sysval
+ nop
+ hw_rei
+
+// .sbttl "tbi - PALcode for tbi instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// TB invalidate
+// r16/a0 = TBI type
+// r17/a1 = Va for TBISx instructions
+//-
+
+ CALL_PAL_PRIV(PAL_TBI_ENTRY)
+Call_Pal_Tbi:
+ addq r16, 2, r16 // change range to 0-2
+ br r23, CALL_PAL_tbi_10_ // get our address
+
+CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
+ lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
+ sll r16, 4, r16 // * 16
+ blbc r22, CALL_PAL_tbi_30_ // go rei, if not
+
+ addq r23, r16, r23 // addr of our code
+//orig pvc_jsr tbi
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_tbi_30_:
+ hw_rei
+ nop
+
+// .sbttl "wrent - PALcode for wrent instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Update ent* in paltemps
+// r16/a0 = Address of entry routine
+// r17/a1 = Entry Number 0..5
+//
+// r22, r23 trashed
+//-
+
+ CALL_PAL_PRIV(PAL_WRENT_ENTRY)
+Call_Pal_Wrent:
+ cmpult r17, 6, r22 // see if in range
+ br r23, CALL_PAL_wrent_10_ // get our address
+
+CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
+ blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
+
+ lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
+ sll r17, 4, r17 // *16
+
+ addq r17, r23, r23 // Get address in table
+//orig pvc_jsr wrent
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_wrent_30_:
+ hw_rei // out of range, just return
+
+// .sbttl "swpipl - PALcode for swpipl instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- PS<IPL>
+// PS<IPL> <- a0<2:0> (r16)
+//
+// t8 (r22) is scratch
+//-
+
+ CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
+Call_Pal_Swpipl:
+ and r16, osfps_m_ipl, r16 // clean New ipl
+ mfpr r22, pt_intmask // get int mask
+
+ extbl r22, r16, r22 // get mask for this ipl
+ bis r11, r31, r0 // return old ipl
+
+ bis r16, r31, r11 // set new ps
+ mtpr r22, ev5__ipl // set new mask
+
+ mfpr r31, pt0 // pad ipl write
+ mfpr r31, pt0 // pad ipl write
+
+ hw_rei // back
+
+// .sbttl "rdps - PALcode for rdps instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- ps
+//-
+
+ CALL_PAL_PRIV(PAL_RDPS_ENTRY)
+Call_Pal_Rdps:
+ bis r11, r31, r0 // Fetch PALshadow PS
+ nop // Must be 2 cycles long
+ hw_rei
+
+// .sbttl "wrkgp - PALcode for wrkgp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// kgp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
+Call_Pal_Wrkgp:
+ nop
+ mtpr r16, pt_kgp
+ nop // Pad for pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrusp - PALcode for wrusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// usp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
+Call_Pal_Wrusp:
+ nop
+ mtpr r16, pt_usp
+ nop // Pad possible pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+//
+// Function:
+// Various control functions for the onchip performance counters
+//
+// option selector in r16
+// option argument in r17
+// returned status in r0
+//
+//
+// r16 = 0 Disable performance monitoring for one or more cpu's
+// r17 = 0 disable no counters
+// r17 = bitmask disable counters specified in bit mask (1=disable)
+//
+// r16 = 1 Enable performance monitoring for one or more cpu's
+// r17 = 0 enable no counters
+// r17 = bitmask enable counters specified in bit mask (1=enable)
+//
+// r16 = 2 Mux select for one or more cpu's
+// r17 = Mux selection (cpu specific)
+// <24:19> bc_ctl<pm_mux_sel> field (see spec)
+// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
+//
+// r16 = 3 Options
+// r17 = (cpu specific)
+// <0> = 0 log all processes
+// <0> = 1 log only selected processes
+// <30,9,8> mode select - ku,kp,kk
+//
+// r16 = 4 Interrupt frequency select
+// r17 = (cpu specific) indicates interrupt frequencies desired for each
+// counter, with "zero interrupts" being an option
+// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
+//
+// r16 = 5 Read Counters
+// r17 = na
+// r0 = value (same format as ev5 pmctr)
+// <0> = 0 Read failed
+// <0> = 1 Read succeeded
+//
+// r16 = 6 Write Counters
+// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
+//
+// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
+// r17 = 0 enable no counters
+// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
+//
+//=============================================================================
+//Assumptions:
+//PMCTR_CTL:
+//
+// <15:14> CTL0 -- encoded frequency select and enable - CTR0
+// <13:12> CTL1 -- " - CTR1
+// <11:10> CTL2 -- " - CTR2
+//
+// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
+// <7:6> FRQ1 -- frequency select for CTR1
+// <5:4> FRQ2 -- frequency select for CTR2
+//
+// <0> all vs. select processes (0=all,1=select)
+//
+// where
+// FRQx<1:0>
+// 0 1 disable interrupt
+// 1 0 frequency = 65536 (16384 for ctr2)
+// 1 1 frequency = 256
+// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
+//
+//=============================================================================
+//
+ CALL_PAL_PRIV(0x0039)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_Wrperfmon:
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+ cmpeq r16, 1, r0 // check for enable
+ bne r0, perfmon_en // br if requested to enable
+
+ cmpeq r16, 2, r0 // check for mux ctl
+ bne r0, perfmon_muxctl // br if request to set mux controls
+
+ cmpeq r16, 3, r0 // check for options
+ bne r0, perfmon_ctl // br if request to set options
+
+ cmpeq r16, 4, r0 // check for interrupt frequency select
+ bne r0, perfmon_freq // br if request to change frequency select
+
+ cmpeq r16, 5, r0 // check for counter read request
+ bne r0, perfmon_rd // br if request to read counters
+
+ cmpeq r16, 6, r0 // check for counter write request
+ bne r0, perfmon_wr // br if request to write counters
+
+ cmpeq r16, 7, r0 // check for counter clear/enable request
+ bne r0, perfmon_enclr // br if request to clear/enable counters
+
+ beq r16, perfmon_dis // br if requested to disable (r16=0)
+ br r31, perfmon_unknown // br if unknown request
+#else
+
+ br r31, pal_perfmon_debug
+#endif
+
+// .sbttl "rdusp - PALcode for rdusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- usp
+//-
+
+ CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
+Call_Pal_Rdusp:
+ nop
+ mfpr r0, pt_usp
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x003B)
+CallPal_OpcDec3B:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "whami - PALcode for whami instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- whami
+//-
+ CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
+Call_Pal_Whami:
+ nop
+ mfpr r0, pt_whami // Get Whami
+ extbl r0, 1, r0 // Isolate just whami bits
+ hw_rei
+
+// .sbttl "retsys - PALcode for retsys instruction"
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// 00(sp) contains return pc
+// 08(sp) contains r29
+//
+// Function:
+// Return from system call.
+// mode switched from kern to user.
+// stacks swapped, ugp, upc restored.
+// r23, r25 junked
+//-
+
+ CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
+Call_Pal_Retsys:
+ lda r25, osfsf_c_size(sp) // pop stack
+ bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save exc_addr in case of fault
+ ldq r23, osfsf_pc(sp) // get pc
+
+ ldq r29, osfsf_gp(sp) // get gp
+ stl_c r31, -4(sp) // clear lock_flag
+
+ lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
+ mfpr r30, pt_usp // get users stack
+
+ bic r23, 3, r23 // clean return pc
+ mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
+
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
+ mtpr r25, pt_ksp // save kern stack
+
+ rc r31 // clear inter_flag
+// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
+ hw_rei_spe // and back
+
+
+ CALL_PAL_PRIV(0x003E)
+CallPal_OpcDec3E:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rti - PALcode for rti instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// 00(sp) -> ps
+// 08(sp) -> pc
+// 16(sp) -> r29 (gp)
+// 24(sp) -> r16 (a0)
+// 32(sp) -> r17 (a1)
+// 40(sp) -> r18 (a3)
+//-
+
+ CALL_PAL_PRIV(PAL_RTI_ENTRY)
+#ifdef SIMOS
+ /* called once by platform_tlaser */
+ .globl Call_Pal_Rti
+#endif
+Call_Pal_Rti:
+ lda r25, osfsf_c_size(sp) // get updated sp
+ bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save PC in case of fault
+ rc r31 // clear intr_flag
+
+ ldq r12, -6*8(r25) // get ps
+ ldq r13, -5*8(r25) // pc
+
+ ldq r18, -1*8(r25) // a2
+ ldq r17, -2*8(r25) // a1
+
+ ldq r16, -3*8(r25) // a0
+ ldq r29, -4*8(r25) // gp
+
+ bic r13, 3, r13 // clean return pc
+ stl_c r31, -4(r25) // clear lock_flag
+
+ and r12, osfps_m_mode, r11 // get mode
+ mtpr r13, exc_addr // set return address
+
+ beq r11, rti_to_kern // br if rti to Kern
+ br r31, rti_to_user // out of call_pal space
+
+
+// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
+// .sbttl "bpt- PALcode for bpt instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ .text 1
+// . = 0x3000
+ CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
+Call_Pal_Bpt:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bpt_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bpt, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "bugchk- PALcode for bugchk instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
+Call_Pal_Bugchk:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bugchk_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bugchk, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+ CALL_PAL_UNPRIV(0x0082)
+CallPal_OpcDec82:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "callsys - PALcode for callsys instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Switch mode to kernel and build a callsys stack frame.
+// sp = ksp
+// gp = kgp
+// t8 - t10 (r22-r24) trashed
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
+Call_Pal_Callsys:
+
+ and r11, osfps_m_mode, r24 // get mode
+ mfpr r22, pt_ksp // get ksp
+
+ beq r24, sys_from_kern // sysCall from kern is not allowed
+ mfpr r12, pt_entsys // get address of callSys routine
+
+//+
+// from here on we know we are in user going to Kern
+//-
+ mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ bis r31, r31, r11 // PS=0 (mode=kern)
+ mfpr r23, exc_addr // get pc
+
+ mtpr r30, pt_usp // save usp
+ lda sp, 0-osfsf_c_size(r22)// set new sp
+
+ stq r29, osfsf_gp(sp) // save user gp/r29
+ stq r24, osfsf_ps(sp) // save ps
+
+ stq r23, osfsf_pc(sp) // save pc
+ mtpr r12, exc_addr // set address
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kern gp/r29
+
+ hw_rei_spe // and off we go!
+
+
+ CALL_PAL_UNPRIV(0x0084)
+CallPal_OpcDec84:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0085)
+CallPal_OpcDec85:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "imb - PALcode for imb instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Flush the writebuffer and flush the Icache
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
+Call_Pal_Imb:
+ mb // Clear the writebuffer
+ mfpr r31, ev5__mcsr // Sync with clear
+ nop
+ nop
+ br r31, pal_ic_flush // Flush Icache
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x0087)
+CallPal_OpcDec87:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0088)
+CallPal_OpcDec88:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0089)
+CallPal_OpcDec89:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008A)
+CallPal_OpcDec8A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008B)
+CallPal_OpcDec8B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008C)
+CallPal_OpcDec8C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008D)
+CallPal_OpcDec8D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008E)
+CallPal_OpcDec8E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008F)
+CallPal_OpcDec8F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0090)
+CallPal_OpcDec90:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0091)
+CallPal_OpcDec91:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0092)
+CallPal_OpcDec92:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0093)
+CallPal_OpcDec93:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0094)
+CallPal_OpcDec94:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0095)
+CallPal_OpcDec95:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0096)
+CallPal_OpcDec96:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0097)
+CallPal_OpcDec97:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0098)
+CallPal_OpcDec98:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0099)
+CallPal_OpcDec99:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009A)
+CallPal_OpcDec9A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009B)
+CallPal_OpcDec9B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009C)
+CallPal_OpcDec9C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009D)
+CallPal_OpcDec9D:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdunique - PALcode for rdunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- unique
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
+CALL_PALrdunique_:
+ mfpr r0, pt_pcbb // get pcb pointer
+ ldqp r0, osfpcb_q_unique(r0) // get new value
+
+ hw_rei
+
+// .sbttl "wrunique - PALcode for wrunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// unique <- a0 (r16)
+//
+//-
+//
+CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
+CALL_PAL_Wrunique:
+ nop
+ mfpr r12, pt_pcbb // get pcb pointer
+ stqp r16, osfpcb_q_unique(r12)// get new value
+ nop // Pad palshadow write
+ hw_rei // back
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00A0)
+CallPal_OpcDecA0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A1)
+CallPal_OpcDecA1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A2)
+CallPal_OpcDecA2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A3)
+CallPal_OpcDecA3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A4)
+CallPal_OpcDecA4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A5)
+CallPal_OpcDecA5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A6)
+CallPal_OpcDecA6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A7)
+CallPal_OpcDecA7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A8)
+CallPal_OpcDecA8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A9)
+CallPal_OpcDecA9:
+ br r31, osfpal_calpal_opcdec
+
+
+// .sbttl "gentrap - PALcode for gentrap instruction"
+//+
+// CALL_PAL_gentrap:
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ CALL_PAL_UNPRIV(0x00AA)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_gentrap:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_gentrap_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_gentrap, r16// set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00AB)
+CallPal_OpcDecAB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AC)
+CallPal_OpcDecAC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AD)
+CallPal_OpcDecAD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AE)
+CallPal_OpcDecAE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AF)
+CallPal_OpcDecAF:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B0)
+CallPal_OpcDecB0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B1)
+CallPal_OpcDecB1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B2)
+CallPal_OpcDecB2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B3)
+CallPal_OpcDecB3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B4)
+CallPal_OpcDecB4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B5)
+CallPal_OpcDecB5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B6)
+CallPal_OpcDecB6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B7)
+CallPal_OpcDecB7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B8)
+CallPal_OpcDecB8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B9)
+CallPal_OpcDecB9:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BA)
+CallPal_OpcDecBA:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BB)
+CallPal_OpcDecBB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BC)
+CallPal_OpcDecBC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BD)
+CallPal_OpcDecBD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BE)
+CallPal_OpcDecBE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BF)
+CallPal_OpcDecBF:
+ // MODIFIED BY EGH 2/25/04
+ br r31, copypal_impl
+
+
+/*======================================================================*/
+/* OSF/1 CALL_PAL CONTINUATION AREA */
+/*======================================================================*/
+
+ .text 2
+
+ . = 0x4000
+
+
+// .sbttl "Continuation of MTPR_PERFMON"
+ ALIGN_BLOCK
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+// mux ctl
+perfmon_muxctl:
+ lda r8, 1(r31) // get a 1
+ sll r8, pmctr_v_sel0, r8 // move to sel0 position
+ or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
+ and r17, r8, r25 // isolate pmctr mux select bits
+ mfpr r0, ev5__pmctr
+ bic r0, r8, r0 // clear old mux select bits
+ or r0,r25, r25 // or in new mux select bits
+ mtpr r25, ev5__pmctr
+
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, bc_ctl_v_pm_mux_sel, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+ br r31, perfmon_success
+
+
+// requested to disable perf monitoring
+perfmon_dis:
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+perfmon_dis_ctr0: // and begin with ctr0
+ blbc r17, perfmon_dis_ctr1 // do not disable ctr0
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl0, r8
+ bic r14, r8, r14 // disable ctr0
+perfmon_dis_ctr1:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_ctr2 // do not disable ctr1
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl1, r8
+ bic r14, r8, r14 // disable ctr1
+perfmon_dis_ctr2:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_update // do not disable ctr2
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl2, r8
+ bic r14, r8, r14 // disable ctr2
+perfmon_dis_update:
+ mtpr r14, ev5__pmctr // update pmctr ipr
+//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
+// adapted from ev5_pal_macros.mar
+//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
+
+ lda r17, 0x3F(r31) // build mask
+ sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
+ and r14, r17, r14 // isolate ctl bits
+ bic r8, r17, r8 // clear out old ctl bits
+ or r14, r8, r14 // create shadow ctl bits
+//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
+//adjusted impure pointer still in r25
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
+
+ br r31, perfmon_success
+
+
+// requested to enable perf monitoring
+//;the following code can be greatly simplified for pass2, but should work fine as is.
+
+
+perfmon_enclr:
+ lda r9, 1(r31) // set enclr flag
+ br perfmon_en_cont
+
+perfmon_en:
+ bis r31, r31, r9 // clear enclr flag
+
+perfmon_en_cont:
+ mfpr r8, pt_pcbb // get PCB base
+//orig get_pmctr_ctl r25, r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
+
+ ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+ srl r16, osfpcb_v_pme, r16 // get pme bit
+ mfpr r13, icsr
+ and r16, 1, r16 // isolate pme bit
+
+ // this code only needed in pass2 and later
+//orig sget_addr r12, 1<<icsr_v_pmp, r31
+ lda r12, 1<<icsr_v_pmp(r31) // pb
+ bic r13, r12, r13 // clear pmp bit
+ sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
+ or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
+ ev5_pass2 mtpr r13, icsr // update icsr
+
+#if ev5_p1 != 0
+ lda r12, 1(r31)
+ cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
+#else
+ bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
+#endif
+
+ sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
+ bis r14, r31, r13 // copy pmctr
+
+perfmon_en_ctr0: // and begin with ctr0
+ blbc r17, perfmon_en_ctr1 // do not enable ctr0
+
+ blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr0<15:0> mask
+ sll r8, pmctr_v_ctr0, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr0:
+//orig get_addr r8, 3<<pmctr_v_ctl0, r31
+ LDLI(r8, (3<<pmctr_v_ctl0))
+ and r25, r8, r12 //isolate frequency select bits for ctr0
+ bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl0 bits
+
+perfmon_en_ctr1: // enable ctr1
+ srl r17, 1, r17 // get ctr1 enable
+ blbc r17, perfmon_en_ctr2 // do not enable ctr1
+
+ blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr1<15:0> mask
+ sll r8, pmctr_v_ctr1, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr1:
+//orig get_addr r8, 3<<pmctr_v_ctl1, r31
+ LDLI(r8, (3<<pmctr_v_ctl1))
+ and r25, r8, r12 //isolate frequency select bits for ctr1
+ bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl1 bits
+
+perfmon_en_ctr2: // enable ctr2
+ srl r17, 1, r17 // get ctr2 enable
+ blbc r17, perfmon_en_return // do not enable ctr2 - return
+
+ blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr2:
+//orig get_addr r8, 3<<pmctr_v_ctl2, r31
+ LDLI(r8, (3<<pmctr_v_ctl2))
+ and r25, r8, r12 //isolate frequency select bits for ctr2
+ bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl2 bits
+
+perfmon_en_return:
+ cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
+ // else only do the counter clears
+ mtpr r13, ev5__pmctr // update pmctr ipr
+
+//;this code not needed for pass2 and later, but does not hurt to leave it in
+ lda r8, 0x3F(r31)
+//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
+
+ sll r8, pmctr_v_ctl2, r8 // build ctl mask
+ and r8, r14, r14 // isolate new ctl bits
+ bic r25, r8, r25 // clear out old ctl value
+ or r25, r14, r14 // create new pmctr_ctl
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+
+// options...
+perfmon_ctl:
+
+// set mode
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
+ LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
+ mfpr r0, ev5__pmctr
+ and r17, r8, r25 // isolate pmctr mode bits
+ bic r0, r8, r0 // clear old mode bits
+ or r0, r25, r25 // or in new mode bits
+ mtpr r25, ev5__pmctr
+
+//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
+ mfpr r8, icsr
+ lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
+ bic r8, r25, r8 // clear old pma bit
+ cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
+ or r8, r25, r8
+ ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
+ mfpr r31, pt0 // pad icsr write
+ mfpr r31, pt0 // pad icsr write
+
+//;the following code not needed for pass2 and later, but should work anyway.
+ bis r14, 1, r14 // set for select processes
+ blbs r17, perfmon_sp // branch if select processes
+ bic r14, 1, r14 // all processes
+perfmon_sp:
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+ br r31, perfmon_success
+
+// counter frequency select
+perfmon_freq:
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+ lda r8, 0x3F(r31)
+//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
+// I guess this should be a shift of 4 bits from the above control register structure .. pb
+#define pmctr_ctl_v_frq2_SHIFT 4
+ sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
+
+ and r8, r17, r17
+ bic r14, r8, r14 // clear out old frequency select bits
+
+ or r17, r14, r14 // or in new frequency select info
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+// read counters
+perfmon_rd:
+ mfpr r0, ev5__pmctr
+ or r0, 1, r0 // or in return status
+ hw_rei // back to user
+
+// write counters
+perfmon_wr:
+ mfpr r14, ev5__pmctr
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+
+//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
+ LDLI(r9, (0xFFFFFFFF))
+ sll r9, pmctr_v_ctr1, r9
+ or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
+ bic r14, r8, r14 // clear ctr fields
+ and r17, r8, r25 // clear all but ctr fields
+ or r25, r14, r14 // write ctr fields
+ mtpr r14, ev5__pmctr // update pmctr ipr
+
+ mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
+
+perfmon_success:
+ or r31, 1, r0 // set success
+ hw_rei // back to user
+
+perfmon_unknown:
+ or r31, r31, r0 // set fail
+ hw_rei // back to user
+
+#else
+
+// end of "real code", start of debug code
+
+//+
+// Debug environment:
+// (in pass2, always set icsr<pma> to ensure master counter enable is on)
+// R16 = 0 Write to on-chip performance monitor ipr
+// r17 = on-chip ipr
+// r0 = return value of read of on-chip performance monitor ipr
+// R16 = 1 Setup Cbox mux selects
+// r17 = Cbox mux selects in same position as in bc_ctl ipr.
+// r0 = return value of read of on-chip performance monitor ipr
+//
+//-
+pal_perfmon_debug:
+ mfpr r8, icsr
+ lda r9, 1<<icsr_v_pma(r31)
+ bis r8, r9, r8
+ mtpr r8, icsr
+
+ mfpr r0, ev5__pmctr // read old value
+ bne r16, cbox_mux_sel
+
+ mtpr r17, ev5__pmctr // update pmctr ipr
+ br r31, end_pm
+
+cbox_mux_sel:
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, BC_CTL_V_PM_MUX_SEL, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+end_pm: hw_rei
+
+#endif
+
+
+//;The following code is a workaround for a cpu bug where Istream prefetches to
+//;super-page address space in user mode may escape off-chip.
+#if spe_fix != 0
+
+ ALIGN_BLOCK
+hw_rei_update_spe:
+ mfpr r12, pt_misc // get previous mode
+ srl r11, osfps_v_mode, r10 // isolate current mode bit
+ and r10, 1, r10
+ extbl r12, 7, r8 // get previous mode field
+ and r8, 1, r8 // isolate previous mode bit
+ cmpeq r10, r8, r8 // compare previous and current modes
+ beq r8, hw_rei_update_spe_5_
+ hw_rei // if same, just return
+
+hw_rei_update_spe_5_:
+
+#if fill_err_hack != 0
+
+ fill_error_hack
+#endif
+
+ mfpr r8, icsr // get current icsr value
+ ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
+ bic r8, r9, r8 // disable spe
+ xor r10, 1, r9 // flip mode for new spe bit
+ sll r9, icsr_v_spe+1, r9 // shift into position
+ bis r8, r9, r8 // enable/disable spe
+ lda r9, 1(r31) // now update our flag
+ sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
+ bic r12, r9, r12 // clear saved previous mode
+ sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
+ bis r12, r9, r12 // set saved current mode
+ mtpr r12, pt_misc // update pt_misc
+ mtpr r8, icsr // update icsr
+
+#if osf_chm_fix != 0
+
+
+ blbc r10, hw_rei_update_spe_10_ // branch if not user mode
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
+ mtpr r12, dc_mode // Turn on dcache
+ mtpr r31, dc_flush // and flush it
+ br r31, pal_ic_flush
+
+hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
+ ldqp r9, osfpcb_q_Fen(r9) // get FEN
+ blbc r9, pal_ic_flush // return if FP disabled
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn off dcache
+#endif
+
+
+ br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
+#endif
+
+
+copypal_impl:
+ mov r16, r0
+ ble r18, finished #if len <=0 we are finished
+ ldq_u r8, 0(r17)
+ xor r17, r16, r9
+ and r9, 7, r9
+ and r16, 7, r10
+ bne r9, unaligned
+ beq r10, aligned
+ ldq_u r9, 0(r16)
+ addq r18, r10, r18
+ mskqh r8, r17, r8
+ mskql r9, r17, r9
+ bis r8, r9, r8
+aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, aligned_done
+loop:
+ stq_u r8, 0(r16)
+ ldq_u r8, 8(r17)
+ subq r10, 8, r10
+ lda r16,8(r16)
+ lda r17,8(r17)
+ bne r10, loop
+aligned_done:
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+ few_left:
+ mskql r8, r18, r10
+ ldq_u r9, 0(r16)
+ mskqh r9, r18, r9
+ bis r10, r9, r10
+ stq_u r10, 0(r16)
+ br r31, finished
+unaligned:
+ addq r17, r18, r25
+ cmpule r18, 8, r9
+ bne r9, unaligned_few_left
+ beq r10, unaligned_dest_aligned
+ and r16, 7, r10
+ subq r31, r10, r10
+ addq r10, 8, r10
+ ldq_u r9, 7(r17)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r12
+ insql r12, r16, r12
+ ldq_u r13, 0(r16)
+ mskql r13, r16, r13
+ bis r12, r13, r12
+ stq_u r12, 0(r16)
+ addq r16, r10, r16
+ addq r17, r10, r17
+ subq r18, r10, r18
+ ldq_u r8, 0(r17)
+unaligned_dest_aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, unaligned_partial_left
+unaligned_loop:
+ ldq_u r9, 7(r17)
+ lda r17, 8(r17)
+ extql r8, r17, r12
+ extqh r9, r17, r13
+ subq r10, 8, r10
+ bis r12, r13, r13
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ beq r10, unaligned_second_partial_left
+ ldq_u r8, 7(r17)
+ lda r17, 8(r17)
+ extql r9, r17, r12
+ extqh r8, r17, r13
+ bis r12, r13, r13
+ subq r10, 8, r10
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ bne r10, unaligned_loop
+unaligned_partial_left:
+ mov r8, r9
+unaligned_second_partial_left:
+ ldq_u r8, -1(r25)
+ extql r9, r17, r9
+ extqh r8, r17, r8
+ bis r8, r9, r8
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+unaligned_few_left:
+ ldq_u r9, -1(r25)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r8
+ insqh r8, r16, r9
+ insql r8, r16, r8
+ lda r12, -1(r31)
+ mskql r12, r18, r13
+ cmovne r13, r13, r12
+ insqh r12, r16, r13
+ insql r12, r16, r12
+ addq r16, r18, r10
+ ldq_u r14, 0(r16)
+ ldq_u r25, -1(r10)
+ bic r14, r12, r14
+ bic r25, r13, r25
+ and r8, r12, r8
+ and r9, r13, r9
+ bis r8, r14, r8
+ bis r9, r25, r9
+ stq_u r9, -1(r10)
+ stq_u r8, 0(r16)
+finished:
+ hw_rei
diff --git a/system/alpha/palcode/osfpal.s b/system/alpha/palcode/osfpal.s
deleted file mode 100644
index 3f42ae143..000000000
--- a/system/alpha/palcode/osfpal.s
+++ /dev/null
@@ -1,5242 +0,0 @@
-// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
-// since we don't have a mechanism to expand the data structures.... pb Nov/95
-
-// build_fixed_image: not sure what means
-// real_mm to be replaced during rewrite
-// remove_save_state remove_restore_state can be remooved to save space ??
-
-
-#include "ev5_defs.h"
-#include "ev5_impure.h"
-#include "ev5_alpha_defs.h"
-#include "ev5_paldef.h"
-#include "ev5_osfalpha_defs.h"
-#include "fromHudsonMacros.h"
-#include "fromHudsonOsf.h"
-#include "dc21164FromGasSources.h"
-
-#ifdef SIMOS
-#define DEBUGSTORE(c) nop
-#else
-#define DEBUGSTORE(c) \
- lda r13, c(zero) ; \
- bsr r25, debugstore
-#endif
-
-#define DEBUG_EXC_ADDR()\
- bsr r25, put_exc_addr; \
- DEBUGSTORE(13) ; \
- DEBUGSTORE(10)
-
-#define egore 0
-#define acore 0
-#define beh_model 0
-#define ev5_p2 1
-#define ev5_p1 0
-#define ldvpte_bug_fix 1
-#define osf_chm_fix 0
-
-// Do we want to do this?? pb
-#define spe_fix 0
-// Do we want to do this?? pb
-#define build_fixed_image 0
-
-#define ev5_pass2
-#define enable_p4_fixups 0
-#define osf_svmin 1
-#define enable_physical_console 0
-#define fill_err_hack 0
-#define icflush_on_tbix 0
-#define max_cpuid 1
-#define perfmon_debug 0
-#define rawhide_system 0
-#define rax_mode 0
-
-
-// This is the fix for the user-mode super page references causing the machine to crash.
-#if (spe_fix == 1) && (build_fixed_image==1)
-#define hw_rei_spe br r31, hw_rei_update_spe
-#else
-#define hw_rei_spe hw_rei
-#endif
-
-
-// redefine a few of the distribution-code names to match the Hudson gas names.
-// opcodes
-#define ldqp ldq_p
-#define stqp stq_p
-#define ldlp ldl_p
-#define stlp stl_p
-
-#define r0 $0
-#define r1 $1
-#define r2 $2
-#define r3 $3
-#define r4 $4
-#define r5 $5
-#define r6 $6
-#define r7 $7
-#define r8 $8
-#define r9 $9
-#define r10 $10
-#define r11 $11
-#define r12 $12
-#define r13 $13
-#define r14 $14
-#define r15 $15
-#define r16 $16
-#define r17 $17
-#define r18 $18
-#define r19 $19
-#define r20 $20
-#define r21 $21
-#define r22 $22
-#define r23 $23
-#define r24 $24
-#define r25 $25
-#define r26 $26
-#define r27 $27
-#define r28 $28
-#define r29 $29
-#define r30 $30
-#define r31 $31
-
-// .title "EV5 OSF PAL"
-// .ident "V1.18"
-//
-//****************************************************************************
-//* *
-//* Copyright (c) 1992, 1993, 1994, 1995 *
-//* by DIGITAL Equipment Corporation, Maynard, Mass. *
-//* *
-//* This software is furnished under a license and may be used and copied *
-//* only in accordance with the terms of such license and with the *
-//* inclusion of the above copyright notice. This software or any other *
-//* copies thereof may not be provided or otherwise made available to any *
-//* other person. No title to and ownership of the software is hereby *
-//* transferred. *
-//* *
-//* The information in this software is subject to change without notice *
-//* and should not be construed as a commitment by DIGITAL Equipment *
-//* Corporation. *
-//* *
-//* DIGITAL assumes no responsibility for the use or reliability of its *
-//* software on equipment which is not supplied by DIGITAL. *
-//* *
-//****************************************************************************
-
-// .sbttl "Edit History"
-//+
-// Who Rev When What
-// ------------ --- ----------- --------------------------------
-// DB 0.0 03-Nov-1992 Start
-// DB 0.1 28-Dec-1992 add swpctx
-// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
-// DB 0.3 11-Jan-1993 rearrange trap entry points
-// DB 0.4 01-Feb-1993 add tbi
-// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
-// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
-// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
-// Bug: typo on register number for store in wrunique
-// Bug: rti to kern uses r16 as scratch
-// Bug: callsys saving wrong value in pt_usp
-// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
-// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
-// Bug: rti stl_c could corrupt the stack
-// Bug: unaligned returning wrong value in r17 (or should be and)
-// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
-// DB 0.11 23-Feb-1993 Turn caches on in reset flow
-// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
-// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
-// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
-// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
-// DB 0.16 12-May-1993 Update reset
-// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
-// Bug: in wrmces, not clearing DPC, DSC
-// Update swppal
-// Add pal bugchecks, pal_save_state, pal_restore_state
-// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
-// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
-// DB 0.18 26-May-1993 PVC fixes
-// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
-// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
-// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
-// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
-// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
-// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
-// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
-// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
-// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
-// JM 0.22 28-jul-1993 Add WRIPIR instruction
-// JM 0.23 05-aug-1993 Bump version number for release
-// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
-// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
-// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
-// and SWPCTX
-// JM 0.26 07-oct-1993 Re-implement pal_version
-// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
-// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
-// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
-// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
-// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
-// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
-// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
-// JM 0.33 24-nov-1993 save/restore_state -
-// BUG: use ivptbr to restore mvptbr
-// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
-// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
-// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
-// BUG: generate ksnv halt when tb miss on kernel stack accesses
-// save exc_addr in r14 for invalid_dpte stack builder
-// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
-// the same shadow
-// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
-// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
-// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
-// Hide impure area manipulations in macros
-// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
-// Add some pvc_violate statements
-// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
-// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
-// Add code to ensure fen bit set in icsr before ldt
-// conditionally compile rax_more_reset out.
-// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
-// move rax reset stuff to ev5_osf_system_pal.m64
-// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
-// and performance monitoring bits
-// Change to save_state routine to save more iprs.
-// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
-// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
-// remove_save_state,remove_restore_state;fix new pvc violation in save_state
-// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
-// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
-// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
-// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
-// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
-// Add exc_sum and exc_mask to pal_save_state (not restore)
-// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
-// area.
-// Add performance counter support to swpctx and wrperfmon
-// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
-// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
-// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
-// taken in the interrupt flow, stack is pushed twice.
-// SWPPAL - update to support ECO 59 to allow 0 as a valid address
-// Add itb flush to save/restore state routines
-// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
-// conforms to itbia restriction.
-// Added enable_physical_console flag (for enter/exit console routines only)
-// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
-// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
-// nmiss_fetch_err to nmiss_fetch_ldr31_err.
-// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
-// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
-// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
-// Moved perfmon code here from system file.
-// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
-// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
-// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
-// after ISR read, but we won't catch the ISR update. reverse order
-// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
-// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
-// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
-// DTBMISS_SINGLE if not in palmode.
-// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
-// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
-// superpage mode in User mode and re-enable in kernel mode.
-// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
-// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
-// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
-// cpu bug.
-// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
-// ES 1.13 17-mar-1995 Refine osf_chm_fix
-// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
-// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
-// Force pvc checking of exit_console
-// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
-// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
-// instead of xor to maintain previous mode in pt_misc
-// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
-// not have pme set. The bits in icsr maintain the master enable state.
-// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
-//
-#define vmaj 1
-#define vmin 18
-#define vms_pal 1
-#define osf_pal 2
-#define pal_type osf_pal
-#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
-//-
-
-// .sbttl "PALtemp register usage"
-
-//+
-// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
-// for these PALtemps:
-//
-// pt0 local scratch
-// pt1 local scratch
-// pt2 entUna pt_entUna
-// pt3 CPU specific impure area pointer pt_impure
-// pt4 memory management temp
-// pt5 memory management temp
-// pt6 memory management temp
-// pt7 entIF pt_entIF
-// pt8 intmask pt_intmask
-// pt9 entSys pt_entSys
-// pt10
-// pt11 entInt pt_entInt
-// pt12 entArith pt_entArith
-// pt13 reserved for system specific PAL
-// pt14 reserved for system specific PAL
-// pt15 reserved for system specific PAL
-// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
-// pt17 sysval pt_sysval
-// pt18 usp pt_usp
-// pt19 ksp pt_ksp
-// pt20 PTBR pt_ptbr
-// pt21 entMM pt_entMM
-// pt22 kgp pt_kgp
-// pt23 PCBB pt_pcbb
-//
-//-
-
-// .sbttl "PALshadow register usage"
-//
-//+
-//
-// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
-// This maps the OSF PAL usage of R8 - R14 and R25:
-//
-// r8 ITBmiss/DTBmiss scratch
-// r9 ITBmiss/DTBmiss scratch
-// r10 ITBmiss/DTBmiss scratch
-// r11 PS
-// r12 local scratch
-// r13 local scratch
-// r14 local scratch
-// r25 local scratch
-//
-//
-//-
-
-// .sbttl "ALPHA symbol definitions"
-// _OSF_PSDEF GLOBAL
-// _OSF_PTEDEF GLOBAL
-// _OSF_VADEF GLOBAL
-// _OSF_PCBDEF GLOBAL
-// _OSF_SFDEF GLOBAL
-// _OSF_MMCSR_DEF GLOBAL
-// _SCBDEF GLOBAL
-// _FRMDEF GLOBAL
-// _EXSDEF GLOBAL
-// _OSF_A0_DEF GLOBAL
-// _MCESDEF GLOBAL
-
-// .sbttl "EV5 symbol definitions"
-
-// _EV5DEF
-// _PALTEMP
-// _MM_STAT_DEF
-// _EV5_MM
-// _EV5_IPLDEF
-
-// _HALT_CODES GLOBAL
-// _MCHK_CODES GLOBAL
-
-// _PAL_IMPURE
-// _PAL_LOGOUT
-
-
-
-
-// .sbttl "PALcode configuration options"
-
-// There are a number of options that may be assembled into this version of
-// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
-// the following). The options that can be adjusted cause the resultant PALcode
-// to reflect the desired target system.
-
-
-#define osfpal 1 // This is the PALcode for OSF.
-
-#ifndef rawhide_system
-
-#define rawhide_system 0
-#endif
-
-
-#ifndef real_mm
-// Page table translation vs 1-1 mapping
-#define real_mm 1
-#endif
-
-
-#ifndef rax_mode
-
-#define rax_mode 0
-#endif
-
-#ifndef egore
-// End of reset flow starts a program at 200000(hex).
-#define egore 1
-#endif
-
-#ifndef acore
-// End of reset flow starts a program at 40000(hex).
-#define acore 0
-#endif
-
-
-// assume acore+egore+rax_mode lt 2 // Assertion checker
-
-#ifndef beh_model
-// EV5 behavioral model specific code
-#define beh_model 1
-#endif
-
-#ifndef init_cbox
-// Reset flow init of Bcache and Scache
-#define init_cbox 1
-#endif
-
-#ifndef disable_crd
-// Decides whether the reset flow will disable
-#define disable_crd 0
-#endif
-
- // correctable read interrupts via ICSR
-#ifndef perfmon_debug
-#define perfmon_debug 0
-#endif
-
-#ifndef icflush_on_tbix
-#define icflush_on_tbix 0
-#endif
-
-#ifndef remove_restore_state
-#define remove_restore_state 0
-#endif
-
-#ifndef remove_save_state
-#define remove_save_state 0
-#endif
-
-#ifndef enable_physical_console
-#define enable_physical_console 0
-#endif
-
-#ifndef ev5_p1
-#define ev5_p1 0
-#endif
-
-#ifndef ev5_p2
-#define ev5_p2 1
-#endif
-
-// assume ev5_p1+ev5_p2 eq 1
-
-#ifndef ldvpte_bug_fix
-#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
-#endif
-
-#ifndef spe_fix
-// If set, disable super-page mode in user mode and re-enable
-#define spe_fix 0
-#endif
- // in kernel. Workaround for cpu bug.
-#ifndef build_fixed_image
-#define build_fixed_image 0
-#endif
-
-
-#ifndef fill_err_hack
-// If set, disable fill_error mode in user mode and re-enable
-#define fill_err_hack 0
-#endif
-
- // in kernel. Workaround for cpu bug.
-
-// .macro hw_rei_spe
-// .iif eq spe_fix, hw_rei
-//#if spe_fix != 0
-//
-//
-//#define hw_rei_chm_count hw_rei_chm_count + 1
-// p4_fixup_label \hw_rei_chm_count
-// .iif eq build_fixed_image, br r31, hw_rei_update_spe
-// .iif ne build_fixed_image, hw_rei
-//#endif
-//
-// .endm
-
-// Add flag "osf_chm_fix" to enable dcache in user mode only
-// to avoid cpu bug.
-
-#ifndef osf_chm_fix
-// If set, enable D-Cache in
-#define osf_chm_fix 0
-#endif
-
-#if osf_chm_fix != 0
-// user mode only.
-#define hw_rei_chm_count 0
-#endif
-
-#if osf_chm_fix != 0
-
-#define hw_rei_stall_chm_count 0
-#endif
-
-#ifndef enable_p4_fixups
-
-#define enable_p4_fixups 0
-#endif
-
- // If set, do EV5 Pass 4 fixups
-#if spe_fix == 0
-
-#define osf_chm_fix 0
-#endif
-
-#if spe_fix == 0
-
-#define enable_p4_fixups 0
-#endif
-
- // Only allow fixups if fix enabled
-
- //Turn off fill_errors and MEM_NEM in user mode
-// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
-// //save r22,r23,r24
-// stqp r22, 0x150(r31) //add
-// stqp r23, 0x158(r31) //contents
-// stqp r24, 0x160(r31) //bit mask
-//
-// lda r22, 0x82(r31)
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
-// bis r23,r31,r23
-//
-// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
-// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L20_ // ELSE
-//L10_: bis r23, r24, r23 // clear fillerr_en bit
-//L20_: // ENDIF
-//
-// stlp r23, 0x80(r22) // write back the CIA_MASK register
-// mb
-// ldlp r23, 0x80(r22)
-// bis r23,r31,r23
-// mb
-//
-// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
-// bis r23,r31,r23
-//
-//
-// lda r24, 0x400(r31) // r9 <- fillerr_en bit
-// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L40_ // ELSE
-//L30_: bis r23, r24, r23 // clear fillerr_en bit
-//L40_: // ENDIF
-//
-// stlp r23, 0(r22) // write back the CIA_CTRL register
-// mb
-// ldlp r23, 0(r22)
-// bis r23,r31,r23
-// mb
-//
-// //restore r22,r23,r24
-// ldqp r22, 0x150(r31)
-// ldqp r23, 0x158(r31)
-// ldqp r24, 0x160(r31)
-//
-// .endm
-
-// multiprocessor support can be enabled for a max of n processors by
-// setting the following to the number of processors on the system.
-// Note that this is really the max cpuid.
-
-#ifndef max_cpuid
-#define max_cpuid 8
-#endif
-
-#ifndef osf_svmin // platform specific palcode version number
-#define osf_svmin 0
-#endif
-
-
-#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
-
-// .mcall ldqp // override macro64 definition with macro from library
-// .mcall stqp // override macro64 definition with macro from library
-
-
-// .psect _pal,mix
-// huh pb pal_base:
-// huh pb #define current_block_base . - pal_base
-
-// .sbttl "RESET - Reset Trap Entry Point"
-//+
-// RESET - offset 0000
-// Entry:
-// Vectored into via hardware trap on reset, or branched to
-// on swppal.
-//
-// r0 = whami
-// r1 = pal_base
-// r2 = base of scratch area
-// r3 = halt code
-//
-//
-// Function:
-//
-//-
-
- .text 0
- . = 0x0000
- .globl Pal_Base
-Pal_Base:
- HDW_VECTOR(PAL_RESET_ENTRY)
-Trap_Reset:
- nop
-#ifdef SIMOS
- /*
- * store into r1
- */
- br r1,sys_reset
-#else
- /* following is a srcmax change */
-
- DEBUGSTORE(0x41)
- /* The original code jumped using r1 as a linkage register to pass the base
- of PALcode to the platform specific code. We use r1 to pass a parameter
- from the SROM, so we hardcode the address of Pal_Base in platform.s
- */
- br r31, sys_reset
-#endif
-
- // Specify PAL version info as a constant
- // at a known location (reset + 8).
-
- .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
- .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
- .long 0
- .long 0
-pal_impure_start:
- .quad 0
-pal_debug_ptr:
- .quad 0 // reserved for debug pointer ; 20
-#if beh_model == 0
-
-
-#if enable_p4_fixups != 0
-
-
- .quad 0
- .long p4_fixup_hw_rei_fixup_table
-#endif
-
-#else
-
- .quad 0 //
- .quad 0 //0x0030
- .quad 0
- .quad 0 //0x0040
- .quad 0
- .quad 0 //0x0050
- .quad 0
- .quad 0 //0x0060
- .quad 0
-pal_enter_cns_address:
- .quad 0 //0x0070 -- address to jump to from enter_console
- .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
-#endif
-
-
-
-
-// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
-
-//+
-// IACCVIO - offset 0080
-// Entry:
-// Vectored into via hardware trap on Istream access violation or sign check error on PC.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV)
-// a2 <- -1 (for ifetch fault)
-// vector via entMM
-//-
-
- HDW_VECTOR(PAL_IACCVIO_ENTRY)
-Trap_Iaccvio:
- DEBUGSTORE(0x42)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_IACCVIO_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bic r14, 3, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entmm // get entry point
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r16, osfsf_pc(sp) // save pc
- stq r29, osfsf_gp(sp) // save gp
-
- mtpr r13, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- subq r31, 1, r18 // pass flag of istream, as a2
- hw_rei_spe
-
-
-// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
-
-//+
-// INTERRUPT - offset 0100
-// Entry:
-// Vectored into via trap on hardware interrupt
-//
-// Function:
-// check for halt interrupt
-// check for passive release (current ipl geq requestor)
-// if necessary, switch to kernel mode
-// push stack frame, update ps (including current mode and ipl copies), sp, and gp
-// pass the interrupt info to the system module
-//
-//-
-
-
- HDW_VECTOR(PAL_INTERRUPT_ENTRY)
-Trap_Interrupt:
- mfpr r13, ev5__intid // Fetch level of interruptor
- mfpr r25, ev5__isr // Fetch interrupt summary register
-
- srl r25, isr_v_hlt, r9 // Get HLT bit
- mfpr r14, ev5__ipl
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
- blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
-
- cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
- bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
-
- and r11, osfps_m_mode, r10 // get mode bit
- beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
-
- mtpr r30, pt_usp // save user stack
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_INTERRUPT_10_:
- lda sp, (0-osfsf_c_size)(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r11, osfsf_ps(sp) // save ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // push gp
- stq r16, osfsf_a0(sp) // a0
-
-// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
- stq r17, osfsf_a1(sp) // a1
-
- stq r18, osfsf_a2(sp) // a2
- subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
-
- srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
- subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
-
- cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
- bis r12, r31, r11 // set new ps
-
- mfpr r12, pt_intmask
- and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
-
-#ifdef SIMOS
- /*
- * Lance had space problems. We don't.
- */
- extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
- mfpr r29, pt_kgp // update gp
- mtpr r14, ev5__ipl // load the new IPL into Ibox
-#else
-// Moved the following three lines to sys_interrupt to make room for debug
-// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
-// mfpr r29, pt_kgp // update gp
-
-// mtpr r14, ev5__ipl // load the new IPL into Ibox
-#endif
- br r31, sys_interrupt // Go handle interrupt
-
-
-
-// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
-
-//+
-// ITBMISS - offset 0180
-// Entry:
-// Vectored into via hardware trap on Istream translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//
-//-
-
- HDW_VECTOR(PAL_ITB_MISS_ENTRY)
-Trap_Itbmiss:
-#if real_mm == 0
-
-
- // Simple 1-1 va->pa mapping
-
- nop // Pad to align to E1
- mfpr r8, exc_addr
-
- srl r8, page_offset_size_bits, r9
- sll r9, 32, r9
-
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
- mtpr r9, itb_pte // E1
-
- hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
-#else
-
- // Real MM mapping
- nop
- mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
-
- nop
- mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
-
-pal_itb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- mtpr r10, exc_addr // Restore exc_address if there was a trap.
-
- mfpr r31, ev5__va // Unlock VA in case there was a double miss
- nop
-
- and r8, osfpte_m_foe, r25 // Look for FOE set.
- blbc r8, invalid_ipte_handler // PTE not valid.
-
- nop
- bne r25, foe_ipte_handler // FOE is set
-
- nop
- mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
-
- hw_rei_stall //
-
-#endif
-
-
-
-
-// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_SINGLE - offset 0200
-// Entry:
-// Vectored into via hardware trap on Dstream single translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//-
-
- HDW_VECTOR(PAL_DTB_MISS_ENTRY)
-Trap_Dtbmiss_Single:
-#if real_mm == 0
- // Simple 1-1 va->pa mapping
- mfpr r8, va // E0
- srl r8, page_offset_size_bits, r9
-
- sll r9, 32, r9
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
-
- mtpr r9, dtb_pte // E0
- nop // Pad to align to E0
-
-
-
- mtpr r8, dtb_tag // E0
- nop
-
- nop // Pad tag write
- nop
-
- nop // Pad tag write
- nop
-
- hw_rei
-#else
- mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
- mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
-
-// DEBUGSTORE(0x45)
-// DEBUG_EXC_ADDR()
- // Real MM mapping
- mfpr r9, ev5__mm_stat // Get read/write bit. E0.
- mtpr r10, pt6 // Stash exc_addr away
-
-pal_dtb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- nop // Pad MF VA
-
- mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
- nop
-
- mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
- blbc r8, invalid_dpte_handler // Handle invalid PTE
-
- mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
- mfpr r10, pt6
-
- // Following 2 instructions take 2 cycles
- mtpr r10, exc_addr // Return linkage in case we trapped. E1.
- mfpr r31, pt0 // Pad the write to dtb_tag
-
- hw_rei // Done, return
-#endif
-
-
-
-
-// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_DOUBLE - offset 0280
-// Entry:
-// Vectored into via hardware trap on Double TBmiss from single miss flows.
-//
-// r8 - faulting VA
-// r9 - original MMstat
-// r10 - original exc_addr (both itb,dtb miss)
-// pt6 - original exc_addr (dtb miss flow only)
-// VA IPR - locked with original faulting VA
-//
-// Function:
-// Get PTE, if valid load TB and return.
-// If not valid then take TNV/ACV exception.
-//
-// pt4 and pt5 are reserved for this flow.
-//
-//
-//-
-
- HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
-Trap_Dtbmiss_double:
-#if ldvpte_bug_fix != 0
- mtpr r8, pt4 // save r8 to do exc_addr check
- mfpr r8, exc_addr
- blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
- mfpr r8, pt4 // restore r8
-#endif
- nop
- mtpr r22, pt5 // Get some scratch space. E1.
- // Due to virtual scheme, we can skip the first lookup and go
- // right to fetch of level 2 PTE
- sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- mtpr r21, pt4 // Get some scratch space. E1.
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- mfpr r21, pt_ptbr // Get physical address of the page table.
-
- nop
- addq r21, r22, r21 // Index into page table for level 2 PTE.
-
- sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- blbc r21, double_pte_inv // Check for Invalid PTE.
-
- srl r21, 32, r21 // extract PFN from PTE
- sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
-
- addq r21, r22, r21 // Index into page table for level 3 PTE.
- nop
-
- ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
- blbc r21, double_pte_inv // Check for invalid PTE.
-
- mtpr r21, ev5__dtb_pte // Write the PTE. E0.
- mfpr r22, pt5 // Restore scratch register
-
- mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
- mfpr r21, pt4 // Restore scratch register
-
- nop // Pad write to tag.
- nop
-
- nop // Pad write to tag.
- nop
-
- hw_rei
-
-
-
-// .sbttl "UNALIGN -- Dstream unalign trap"
-//+
-// UNALIGN - offset 0300
-// Entry:
-// Vectored into via hardware trap on unaligned Dstream reference.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- Opcode
-// a2 <- src/dst register number
-// vector via entUna
-//-
-
- HDW_VECTOR(PAL_UNALIGN_ENTRY)
-Trap_Unalign:
-/* DEBUGSTORE(0x47)*/
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
- mfpr r14, exc_addr // get pc
-
- srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
- blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
-
- blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
- // not set, must be a load
- and r13, 0x1F, r8 // isolate ra
-
- cmpeq r8, 0x1F, r8 // check for r31/F31
- bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
-
-UNALIGN_NO_DISMISS:
- bis r11, r31, r12 // Save PS
- bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-UNALIGN_NO_DISMISS_10_:
- mfpr r25, ev5__va // Unlock VA
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- mtpr r25, pt0 // Stash VA
- stq r18, osfsf_a2(sp) // a2
-
- stq r11, osfsf_ps(sp) // save old ps
- srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
-
- stq r29, osfsf_gp(sp) // save gp
- addq r14, 4, r14 // inc PC past the ld/st
-
- stq r17, osfsf_a1(sp) // a1
- and r25, mm_stat_m_opcode, r17// Clean opocde for a1
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r16, pt0 // a0 <- va/unlock
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entuna // get entry point
-
-
- bis r12, r31, r11 // update ps
- br r31, unalign_trap_cont
-
-
-
-
-// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
-
-//+
-// DFAULT - offset 0380
-// Entry:
-// Vectored into via hardware trap on dstream fault or sign check error on DVA.
-//
-// Function:
-// Ignore faults on FETCH/FETCH_M
-// Check for DFAULT in PAL
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
-// a2 <- R/W
-// vector via entMM
-//
-//-
- HDW_VECTOR(PAL_D_FAULT_ENTRY)
-Trap_Dfault:
-// DEBUGSTORE(0x48)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r13, ev5__mm_stat // Get mmstat
- mfpr r8, exc_addr // get pc, preserve r14
-
- srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
- blbs r8, dfault_in_pal
-
- bis r8, r31, r14 // move exc_addr to correct place
- bis r11, r31, r12 // Save PS
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- and r9, mm_stat_m_opcode, r9 // Clean all but opcode
-
- cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
- //dismiss exception if load to r31/f31
- blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
-
- and r9, 0x1F, r9 // isolate rnum
- nop
-
- cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
-dfault_no_dismiss:
- and r13, 0xf, r13 // Clean extra bits in mm_stat
- bge r25, dfault_trap_cont // no stack swap needed if cm=kern
-
-
- mtpr r30, pt_usp // save user stack
- bis r31, r31, r12 // Set new PS
-
- mfpr r30, pt_ksp
- br r31, dfault_trap_cont
-
-
-
-
-
-// .sbttl "MCHK - Machine Check Trap Entry Point"
-
-//+
-// MCHK - offset 0400
-// Entry:
-// Vectored into via hardware trap on machine check.
-//
-// Function:
-//
-//-
-
- HDW_VECTOR(PAL_MCHK_ENTRY)
-Trap_Mchk:
- DEBUGSTORE(0x49)
- mtpr r31, ic_flush_ctl // Flush the Icache
- br r31, sys_machine_check
-
-
-
-
-// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
-
-//+
-// OPCDEC - offset 0480
-// Entry:
-// Vectored into via hardware trap on illegal opcode.
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_OPCDEC_ENTRY)
-Trap_Opcdec:
- DEBUGSTORE(0x4a)
-//simos DEBUG_EXC_ADDR()
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_OPCDEC_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- addq r14, 4, r14 // inc pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r11, osfsf_ps(sp) // save old ps
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r17, osfsf_a1(sp) // a1
-
- stq r29, osfsf_gp(sp) // save gp
- stq r14, osfsf_pc(sp) // save pc
-
- bis r12, r31, r11 // update ps
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei, E1
-
- mfpr r29, pt_kgp // get the kgp, E1
-
- hw_rei_spe // done, E1
-
-
-
-
-
-
-// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
-
-//+
-// ARITH - offset 0500
-// Entry:
-// Vectored into via hardware trap on arithmetic excpetion.
-//
-// Function:
-// Build stack frame
-// a0 <- exc_sum
-// a1 <- exc_mask
-// a2 <- unpred
-// vector via entArith
-//
-//-
- HDW_VECTOR(PAL_ARITH_ENTRY)
-Trap_Arith:
- DEBUGSTORE(0x4b)
- and r11, osfps_m_mode, r12 // get mode bit
- mfpr r31, ev5__va // unlock mbox
-
- bis r11, r31, r25 // save ps
- mfpr r14, exc_addr // get pc
-
- nop
- blbs r14, pal_pal_bug_check // arith trap from PAL
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- beq r12, TRAP_ARITH_10_ // if zero we are in kern now
-
- bis r31, r31, r25 // set the new ps
- mtpr r30, pt_usp // save user stack
-
- nop
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- nop // Pad current mode write and stq
- mfpr r13, ev5__exc_sum // get the exc_sum
-
- mfpr r12, pt_entarith
- stq r14, osfsf_pc(sp) // save pc
-
- stq r17, osfsf_a1(sp)
- mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
-
- stq r11, osfsf_ps(sp) // save ps
- bis r25, r31, r11 // set new ps
-
- stq r16, osfsf_a0(sp) // save regs
- srl r13, exc_sum_v_swc, r16// shift data to correct position
-
- stq r18, osfsf_a2(sp)
-// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
- mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
-
- stq r29, osfsf_gp(sp)
- mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
-
- mfpr r29, pt_kgp // get the kern gp - E1
- hw_rei_spe // done - E1
-
-
-
-
-
-
-// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
-
-//+
-// FEN - offset 0580
-// Entry:
-// Vectored into via hardware trap on illegal FP op.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_FEN_ENTRY)
-Trap_Fen:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- mfpr r13, ev5__icsr
- nop
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_FEN_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
-
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r11, osfsf_ps(sp) // save old ps
-
- stq r29, osfsf_gp(sp) // save gp
- bis r12, r31, r11 // set new ps
-
- stq r17, osfsf_a1(sp) // a1
- blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
-
- bis r31, osf_a0_fen, r16 // set a0
- stq r14, osfsf_pc(sp) // save pc
-
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei -E1
-
- mfpr r29, pt_kgp // get the kgp -E1
-
- hw_rei_spe // done -E1
-
-// FEN trap was taken, but the fault is really opcdec.
- ALIGN_BRANCH
-fen_to_opcdec:
- addq r14, 4, r14 // save PC+4
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r14, osfsf_pc(sp) // save pc
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
- hw_rei_spe // done
-
-
-
-// .sbttl "Misc handlers"
- // Start area for misc code.
-//+
-//dfault_trap_cont
-// A dfault trap has been taken. The sp has been updated if necessary.
-// Push a stack frame a vector via entMM.
-//
-// Current state:
-// r12 - new PS
-// r13 - MMstat
-// VA - locked
-//
-//-
- ALIGN_BLOCK
-dfault_trap_cont:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r25, ev5__va // Fetch VA/unlock
-
- stq r18, osfsf_a2(sp) // a2
- and r13, 1, r18 // Clean r/w bit for a2
-
- stq r16, osfsf_a0(sp) // save regs
- bis r25, r31, r16 // a0 <- va
-
- stq r17, osfsf_a1(sp) // a1
- srl r13, 1, r17 // shift fault bits to right position
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entmm // get entry point
-
- stq r29, osfsf_gp(sp) // save gp
- cmovlbs r17, 1, r17 // a2. acv overrides fox.
-
- mtpr r25, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- hw_rei_spe // done
-
-//+
-//unalign_trap_cont
-// An unalign trap has been taken. Just need to finish up a few things.
-//
-// Current state:
-// r25 - entUna
-// r13 - shifted MMstat
-//
-//-
- ALIGN_BLOCK
-unalign_trap_cont:
- mtpr r25, exc_addr // load exc_addr with entUna
- // 1 cycle to hw_rei
-
-
- mfpr r29, pt_kgp // get the kgp
- and r13, mm_stat_m_ra, r18 // Clean Ra for a2
-
- hw_rei_spe // done
-
-
-
-//+
-// dfault_in_pal
-// Dfault trap was taken, exc_addr points to a PAL PC.
-// r9 - mmstat<opcode> right justified
-// r8 - exception address
-//
-// These are the cases:
-// opcode was STQ -- from a stack builder, KSP not valid halt
-// r14 - original exc_addr
-// r11 - original PS
-// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
-// KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
-// r10 - original exc_addr
-// r11 - original PS
-//
-//
-//-
- ALIGN_BLOCK
-dfault_in_pal:
- DEBUGSTORE(0x50)
- bic r8, 3, r8 // Clean PC
- mfpr r9, pal_base
-
- mfpr r31, va // unlock VA
-#if real_mm != 0
- // if not real_mm, should never get here from miss flows
-
- subq r9, r8, r8 // pal_base - offset
-
- lda r9, pal_itb_ldq-pal_base(r8)
- nop
-
- beq r9, dfault_do_bugcheck
- lda r9, pal_dtb_ldq-pal_base(r8)
-
- beq r9, dfault_do_bugcheck
-#endif
-
-//
-// KSP invalid halt case --
-ksp_inval_halt:
- DEBUGSTORE(76)
- bic r11, osfps_m_mode, r11 // set ps to kernel mode
- mtpr r0, pt0
-
- mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
- mtpr r31, ips
-
- mtpr r14, exc_addr // Set PC to instruction that caused trouble
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-
- lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
- br r31, sys_enter_console // enter the console
-
- ALIGN_BRANCH
-dfault_do_bugcheck:
- bis r10, r31, r14 // bugcheck expects exc_addr in r14
- br r31, pal_pal_bug_check
-
-
- ALIGN_BLOCK
-//+
-// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
-// On entry -
-// r14 - exc_addr
-// VA is locked
-//
-//-
-dfault_fetch_ldr31_err:
- mtpr r11, ev5__dtb_cm
- mtpr r11, ev5__ps // Make sure ps hasn't changed
-
- mfpr r31, va // unlock the mbox
- addq r14, 4, r14 // inc the pc to skip the fetch
-
- mtpr r14, exc_addr // give ibox new PC
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei
-
-
-
- ALIGN_BLOCK
-//+
-// sys_from_kern
-// callsys from kernel mode - OS bugcheck machine check
-//
-//-
-sys_from_kern:
- mfpr r14, exc_addr // PC points to call_pal
- subq r14, 4, r14
-
- lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
- br r31, pal_pal_mchk
-
-
-// .sbttl "Continuation of long call_pal flows"
- ALIGN_BLOCK
-//+
-// wrent_tbl
-// Table to write *int in paltemps.
-// 4 instructions/entry
-// r16 has new value
-//
-//-
-wrent_tbl:
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entint
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entarith
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entmm
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entif
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entuna
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entsys
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
- ALIGN_BLOCK
-//+
-// tbi_tbl
-// Table to do tbi instructions
-// 4 instructions per entry
-//-
-tbi_tbl:
- // -2 tbia
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_ia // Flush DTB
- mtpr r31, ev5__itb_ia // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
- // -1 tbiap
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_iap // Flush DTB
- mtpr r31, ev5__itb_iap // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
-
- // 0 unused
-//orig pvc_jsr tbi, dest=1
- hw_rei // Pad table
- nop
- nop
- nop
-
-
- // 1 tbisi
-//orig pvc_jsr tbi, dest=1
-#if icflush_on_tbix != 0
-
-
-
- nop
- br r31, pal_ic_flush_and_tbisi // Flush Icache
- nop
- nop // Pad table
-#else
-
- nop
- nop
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- // 2 tbisd
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB.
- nop
-
- nop
- hw_rei_stall
-
-
- // 3 tbis
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
-#else
- br r31, tbi_finish
- ALIGN_BRANCH
-tbi_finish:
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- ALIGN_BLOCK
-//+
-// bpt_bchk_common:
-// Finish up the bpt/bchk instructions
-//-
-bpt_bchk_common:
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
- ALIGN_BLOCK
-//+
-// rti_to_user
-// Finish up the rti instruction
-//-
-rti_to_user:
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mfpr r30, pt_usp
- hw_rei_spe // and back
-
-
- ALIGN_BLOCK
-//+
-// rti_to_kern
-// Finish up the rti instruction
-//-
-rti_to_kern:
- and r12, osfps_m_ipl, r11 // clean ps
- mfpr r12, pt_intmask // get int mask
-
- extbl r12, r11, r12 // get mask for this ipl
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mtpr r12, ev5__ipl // set the new ipl.
- or r25, r31, sp // sp
-
-// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
- hw_rei
-
- ALIGN_BLOCK
-//+
-// swpctx_cont
-// Finish up the swpctx instruction
-//-
-
-swpctx_cont:
-#if ev5_p1 != 0
-
-
- bic r25, r24, r25 // clean icsr<FPE>
- get_impure r8 // get impure pointer
-
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
- fix_impure_ipr r8 // adjust impure pointer
-
- restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
- srl r23, 32, r24 // move asn to low asn pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- sll r24, itb_asn_v_asn, r12
-
-#else
-
- bic r25, r24, r25 // clean icsr<FPE,PMP>
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- srl r23, 32, r24 // move asn to low asn pos
-
- and r22, 1, r22
- sll r24, itb_asn_v_asn, r12
-
- sll r22, icsr_v_pmp, r22
- nop
-
- or r25, r22, r25 // icsr with new pme
-#endif
-
- sll r24, dtb_asn_v_asn, r24
-
- subl r23, r13, r13 // gen new cc offset
- mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
-
- mtpr r24, dtb_asn // Load up new ASN
- mtpr r25, icsr // write the icsr
-
- sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
- ldqp r25, osfpcb_q_usp(r16) // get new usp
-
- insll r13, 4, r13 // >> 32
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r14, pt_ptbr // load the new ptbr
-
- mtpr r13, cc // set new offset
- ldqp r30, osfpcb_q_ksp(r16) // get new ksp
-
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r25, pt_usp // save usp
-
-#if ev5_p1 != 0
-
-
- blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
-
- // otherwise, monitoring select processes - update pm
- lda r25, 0x3F(r31)
- cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
-
- sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
- mfpr r22, ev5__pmctr
-
- and r8, r25, r8 // mask new ctl value
- bic r22, r25, r22 // clear ctl field in pmctr
-
- or r8, r22, r8
- mtpr r8, ev5__pmctr
-
-no_pm_change:
-#endif
-
-
-#if osf_chm_fix != 0
-
-
- p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
-
-#if build_fixed_image != 0
-
-
- hw_rei_stall
-#else
-
- mfpr r9, pt_pcbb // get FEN
-#endif
-
- ldqp r9, osfpcb_q_fen(r9)
- blbc r9, no_pm_change_10_ // skip if FEN disabled
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31)
- mtpr r12, dc_mode // turn dcache on so we can flush it
- nop // force correct slotting
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
-
- lda r8, 0(r31) // flood the dcache with junk data
-no_pm_change_5_: ldqp r31, 0(r8)
- lda r8, 0x20(r8) // touch each cache block
- srl r8, 13, r9
- blbc r9, no_pm_change_5_
-
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn the dcache back off
- nop // force correct slotting
- mfpr r31, pt0 // no hw_rei_stall in 0,1
-#endif
-
-
-no_pm_change_10_: hw_rei_stall // back we go
-
- ALIGN_BLOCK
-//+
-// swppal_cont - finish up the swppal call_pal
-//-
-
-swppal_cont:
- mfpr r2, pt_misc // get misc bits
- sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
- or r2, r0, r2 // set the bit
- mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
- mtpr r2, pt_misc // update the chip
-
- or r3, r31, r4
- mfpr r3, pt_impure // pass pointer to the impure area in r3
-//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
-//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
-//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
-//orig unfix_impure_ipr r3 // restore impure pointer
- lda r3, CNS_Q_IPR(r3)
- RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
- RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
- lda r3, -CNS_Q_IPR(r3)
-
- or r31, r31, r0 // set status to success
-// pvc_violate 1007
- jmp r31, (r4) // and call our friend, it's her problem now
-
-
-swppal_fail:
- addq r0, 1, r0 // set unknown pal or not loaded
- hw_rei // and return
-
-
-// .sbttl "Memory management"
-
- ALIGN_BLOCK
-//+
-//foe_ipte_handler
-// IFOE detected on level 3 pte, sort out FOE vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV vs FOE. Build stack and dispatch
-// Will not be here if TNV.
-//-
-
-foe_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- lda r17, mmcsr_c_acv(r31) // assume ACV
-
- stq r16, osfsf_pc(sp) // save pc
- cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
- ALIGN_BLOCK
-//+
-//invalid_ipte_handler
-// TNV detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch.
-//-
-
-invalid_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- and r25, 1, r17 // Isolate kre
-
- stq r16, osfsf_pc(sp) // save pc
- xor r17, 1, r17 // map to acv/tnv as a1
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
-
-
-
- ALIGN_BLOCK
-//+
-//invalid_dpte_handler
-// INVALID detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R10 = va
-// R8 = pte
-// R9 = mm_stat
-// PT6 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch
-//-
-
-
-invalid_dpte_handler:
- mfpr r12, pt6
- blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
-
- bis r12, r31, r14 // save PC in case of tbmiss or fault
- srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
-
- mtpr r11, pt0 // Save PS for stack write
- and r25, mm_stat_m_opcode, r25 // isolate opcode
-
- cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
- blbs r25, nmiss_fetch_ldr31_err // yes
-
- //dismiss exception if load to r31/f31
- blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
-
- and r25, 0x1F, r25 // isolate rnum
- nop
-
- cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
- bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
-
-invalid_dpte_no_dismiss:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r25 // Save va in case TBmiss on stack
- and r9, 1, r13 // save r/w flag
-
- stq r16, osfsf_a0(sp) // a0
- or r25, r31, r16 // pass va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // assume acv
-
- srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
- stq r29, osfsf_gp(sp)
-
- stq r18, osfsf_a2(sp) // a2
- cmovlbs r13, r25, r12 // if write access move acv based on write enable
-
- or r13, r31, r18 // pass flag of dstream access and read vs write
- mfpr r25, pt0 // get ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r13, pt_entmm // get entry point
-
- stq r25, osfsf_ps(sp) // save ps
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
-
- hw_rei_spe // out to exec
-
-//+
-//
-// We come here if we are erring on a dtb_miss, and the instr is a
-// fetch, fetch_m, of load to r31/f31.
-// The PC is incremented, and we return to the program.
-// essentially ignoring the instruction and error.
-//
-//-
- ALIGN_BLOCK
-nmiss_fetch_ldr31_err:
- mfpr r12, pt6
- addq r12, 4, r12 // bump pc to pc+4
-
- mtpr r12, exc_addr // and set entry point
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei //
-
- ALIGN_BLOCK
-//+
-// double_pte_inv
-// We had a single tbmiss which turned into a double tbmiss which found
-// an invalid PTE. Return to single miss with a fake pte, and the invalid
-// single miss flow will report the error.
-//
-// on entry:
-// r21 PTE
-// r22 available
-// VA IPR locked with original fault VA
-// pt4 saved r21
-// pt5 saved r22
-// pt6 original exc_addr
-//
-// on return to tbmiss flow:
-// r8 fake PTE
-//
-//
-//-
-double_pte_inv:
- srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
- mfpr r22, exc_addr // get the pc
-
- lda r22, 4(r22) // inc the pc
- lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
-
- cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
- mtpr r22, exc_addr // set for rei
-
- mfpr r21, pt4 // restore regs
- mfpr r22, pt5 // restore regs
-
- hw_rei // back to tb miss
-
- ALIGN_BLOCK
-//+
-//tnv_in_pal
-// The only places in pal that ld or store are the
-// stack builders, rti or retsys. Any of these mean we
-// need to take a ksp not valid halt.
-//
-//-
-tnv_in_pal:
-
-
- br r31, ksp_inval_halt
-
-
-// .sbttl "Icache flush routines"
-
- ALIGN_BLOCK
-//+
-// Common Icache flush routine.
-//
-//
-//-
-pal_ic_flush:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
- nop
- nop
-
-one_cycle_and_hw_rei:
- nop
- nop
-
- hw_rei_stall
-
-#if icflush_on_tbix != 0
-
-
- ALIGN_BLOCK
-
-//+
-// Common Icache flush and ITB invalidate single routine.
-// ITBIS and hw_rei_stall must be in same octaword.
-// r17 - has address to invalidate
-//
-//-
-PAL_IC_FLUSH_AND_TBISI:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
-
- nop
- nop
-
- nop
- nop
-
- // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
- // 44 nops plus 4 instructions before it is 48 instructions.
- // Since this routine started on a 32-byte (8 instruction) boundary,
- // the following 2 instructions will be in the same octword as required.
-// ALIGN_BRANCH
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-
-#endif
-
- ALIGN_BLOCK
-//+
-//osfpal_calpal_opcdec
-// Here for all opcdec CALL_PALs
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
-osfpal_calpal_opcdec:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- nop
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-osfpal_calpal_opcdec_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- nop
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r17, osfsf_a1(sp) // a1
-
- stq r14, osfsf_pc(sp) // save pc
- nop
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
-
-
-
-//+
-//pal_update_pcb
-// Update the PCB with the current SP, AST, and CC info
-//
-// r0 - return linkage
-//-
- ALIGN_BLOCK
-
-pal_update_pcb:
- mfpr r12, pt_pcbb // get pcbb
- and r11, osfps_m_mode, r25 // get mode
- beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
- mtpr r30, pt_usp // save user stack
- stqp r30, osfpcb_q_usp(r12) // store usp
- br r31, pal_update_pcb_20_ // join common
-pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
-pal_update_pcb_20_: rpcc r13 // get cyccounter
- srl r13, 32, r14 // move offset
- addl r13, r14, r14 // merge for new time
- stlp r14, osfpcb_l_cc(r12) // save time
-
-//orig pvc_jsr updpcb, bsr=1, dest=1
- ret r31, (r0)
-
-
-
-#if remove_save_state == 0
-
-// .sbttl "PAL_SAVE_STATE"
-//+
-//
-// Pal_save_state
-//
-// Function
-// All chip state saved, all PT's, SR's FR's, IPR's
-//
-//
-// Regs' on entry...
-//
-// R0 = halt code
-// pt0 = r0
-// R1 = pointer to impure
-// pt4 = r1
-// R3 = return addr
-// pt5 = r3
-//
-// register usage:
-// r0 = halt_code
-// r1 = addr of impure area
-// r3 = return_address
-// r4 = scratch
-//
-//-
-
-
- ALIGN_BLOCK
- .globl pal_save_state
-pal_save_state:
-//
-//
-// start of implementation independent save routine
-//
-// the impure area is larger than the addressibility of hw_ld and hw_st
-// therefore, we need to play some games: The impure area
-// is informally divided into the "machine independent" part and the
-// "machine dependent" part. The state that will be saved in the
-// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
-// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
-// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
-// macros will automagically adjust the offset correctly.
-//
-
-// The distributed code is commented out and followed by corresponding SRC code.
-// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
-
-//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
-//orig store_reg1 hlt, r0, r1, ipr=1
- SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
-
- mfpr r0, pt0 // get r0 back //orig
-//orig store_reg1 0, r0, r1 // save r0
- SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
-
- mfpr r0, pt4 // get r1 back //orig
-//orig store_reg1 1, r0, r1 // save r1
- SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
-
-//orig store_reg 2 // save r2
- SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
-
- mfpr r0, pt5 // get r3 back //orig
-//orig store_reg1 3, r0, r1 // save r3
- SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
-
- // reason code has been saved
- // r0 has been saved
- // r1 has been saved
- // r2 has been saved
- // r3 has been saved
- // pt0, pt4, pt5 have been lost
-
- //
- // Get out of shadow mode
- //
-
- mfpr r2, icsr // Get icsr //orig
-//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r0, (1<<(icsr_v_sde-16))(r31)
- bic r2, r0, r0 // ICSR with SDE clear //orig
- mtpr r0, icsr // Turn off SDE //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-
- // save integer regs R4-r31
-//orig #define t 4
-//orig .repeat 28
-//orig store_reg \t
-//orig #define t t + 1
-//orig .endr
- SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
- SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
- SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
- SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
- SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
- SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
- SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
- SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
- SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
- SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
- SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
- SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
- SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
- SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
- SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
- SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
- SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
- // save all paltemp regs except pt0
-
-//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
-//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
-//orig #define t 1
-//orig .repeat 23
-//orig store_reg \t , pal=1
-//orig #define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore the impure base address.
- lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
- SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
- SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
- SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
- SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
- SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
- SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
- SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
- SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
- SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
- SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
- SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
- SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
- SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
- SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
- SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
- SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
- SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
- SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
- SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
- SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
- // Restore shadow mode
- mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
- mfpr r31, pt0 //orig
- mtpr r2, icsr // Restore original ICSR //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
- // save all integer shadow regs
-
-//orig #define t 8
-//orig .repeat 7
-//orig store_reg \t, shadow=1
-//orig #define t t + 1
-//orig .endr
-//orig store_reg 25, shadow=1
-
- SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
-
-//orig store_reg exc_addr, ipr=1 // save ipr
-//orig store_reg pal_base, ipr=1 // save ipr
-//orig store_reg mm_stat, ipr=1 // save ipr
-//orig store_reg va, ipr=1 // save ipr
-//orig store_reg icsr, ipr=1 // save ipr
-//orig store_reg ipl, ipr=1 // save ipr
-//orig store_reg ps, ipr=1 // save ipr
-//orig store_reg itb_asn, ipr=1 // save ipr
-//orig store_reg aster, ipr=1 // save ipr
-//orig store_reg astrr, ipr=1 // save ipr
-//orig store_reg sirr, ipr=1 // save ipr
-//orig store_reg isr, ipr=1 // save ipr
-//orig store_reg ivptbr, ipr=1 // save ipr
-//orig store_reg mcsr, ipr=1 // save ipr
-//orig store_reg dc_mode, ipr=1 // save ipr
-
- SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
- SAVE_IPR(va,CNS_Q_VA,r1)
- SAVE_IPR(icsr,CNS_Q_ICSR,r1)
- SAVE_IPR(ipl,CNS_Q_IPL,r1)
- SAVE_IPR(ips,CNS_Q_IPS,r1)
- SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- SAVE_IPR(aster,CNS_Q_ASTER,r1)
- SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
- SAVE_IPR(sirr,CNS_Q_SIRR,r1)
- SAVE_IPR(isr,CNS_Q_ISR,r1)
- SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
- SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
-//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
-//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
-//orig // PVC violation applies only to
-pvc$osf35$379: // loads. HW_ST ok here, so ignore
- SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
-
-
- //the following iprs are informational only -- will not be restored
-
-//orig store_reg icperr_stat, ipr=1
-//orig store_reg pmctr, ipr=1
-//orig store_reg intid, ipr=1
-//orig store_reg exc_sum, ipr=1
-//orig store_reg exc_mask, ipr=1
-//orig ldah r14, 0xfff0(r31)
-//orig zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig nop // pad mf dcperr_stat out of shadow of last store
-//orig nop
-//orig nop
-//orig store_reg dcperr_stat, ipr=1
-
- SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
- SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
- SAVE_IPR(intId,CNS_Q_INT_ID,r1)
- SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
- SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
- ldah r14, 0xFFF0(zero)
- zap r14, 0xE0, r14 // Get base address of CBOX IPRs
- NOP // Pad mfpr dcPerr out of shadow of
- NOP // last store
- NOP
- SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
-
- // read cbox ipr state
-
-//orig mb
-//orig ldqp r2, ev5__sc_ctl(r14)
-//orig ldqp r13, ld_lock(r14)
-//orig ldqp r4, ev5__sc_addr(r14)
-//orig ldqp r5, ev5__ei_addr(r14)
-//orig ldqp r6, ev5__bc_tag_addr(r14)
-//orig ldqp r7, ev5__fill_syn(r14)
-//orig bis r5, r4, r31
-//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
-//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
-//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
-//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
-//orig mb
-
-#ifndef SIMOS
- mb
- ldq_p r2, scCtl(r14)
- ldq_p r13, ldLock(r14)
- ldq_p r4, scAddr(r14)
- ldq_p r5, eiAddr(r14)
- ldq_p r6, bcTagAddr(r14)
- ldq_p r7, fillSyn(r14)
- bis r5, r4, zero // Make sure all loads complete before
- bis r7, r6, zero // reading registers that unlock them.
- ldq_p r8, scStat(r14) // Unlocks scAddr.
- ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
- ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
- mb
-#endif
-//orig // save cbox ipr state
-//orig store_reg1 sc_ctl, r2, r1, ipr=1
-//orig store_reg1 ld_lock, r13, r1, ipr=1
-//orig store_reg1 sc_addr, r4, r1, ipr=1
-//orig store_reg1 ei_addr, r5, r1, ipr=1
-//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
-//orig store_reg1 fill_syn, r7, r1, ipr=1
-//orig store_reg1 sc_stat, r8, r1, ipr=1
-//orig store_reg1 ei_stat, r9, r1, ipr=1
-//orig //bc_config? sl_rcv?
-
- SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
- SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
- SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
- SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
- SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
- SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
- SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
- SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
-
-// restore impure base //orig
-//orig unfix_impure_ipr r1
- lda r1, -CNS_Q_IPR(r1)
-
-// save all floating regs //orig
- mfpr r0, icsr // get icsr //orig
- or r31, 1, r2 // get a one //orig
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
- sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
- or r2, r0, r0 // set FEN on //orig
- mtpr r0, icsr // write to icsr, enabling FEN //orig
-
-// map the save area virtually
-// orig mtpr r31, dtb_ia // clear the dtb
-// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-// orig sll r0, 32, r0 // shift to PFN field
-// orig lda r2, 0xff(r31) // all read enable and write enable bits set
-// orig sll r2, 8, r2 // move to PTE location
-// orig addq r0, r2, r0 // combine with PFN
-// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-// orig mtpr r1, dtb_tag // write TB tag
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too - in case the impure area crosses a page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag
-
- lda r4, (1<<va_s_off)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
- sll r31, 0, r31 // stall cycle 1 // orig
- sll r31, 0, r31 // stall cycle 2 // orig
- sll r31, 0, r31 // stall cycle 3 // orig
- nop // orig
-
-//orig // add offset for saving fpr regs
-//orig fix_impure_gpr r1
-
- lda r1, 0x200(r1) // Point to center of CPU segment
-
-// now save the regs - F0-F31
-
-//orig #define t 0
-//orig .repeat 32
-//orig store_reg \t , fpu=1
-//orig #define t t + 1
-//orig .endr
-
- mf_fpcr f0 // original
-
- SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
- SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
- SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
- SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
- SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
- SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
- SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
- SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
- SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
- SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
- SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
- SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
- SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
- SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
- SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
- SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
- SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
- SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
- SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
- SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
- SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig //switch impure offset from gpr to ipr---
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig store_reg1 fpcsr, f0, r1, fpcsr=1
-
- SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
- lda r1, -0x200(r1) // Restore the impure base address
-
-//orig // and back to gpr ---
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-
-//orig lda r0, cns_mchksize(r31) // get size of mchk area
-//orig store_reg1 mchkflag, r0, r1, ipr=1
-//orig mb
-
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
- // save this using the IPR base (it is closer) not the GRP base as they used...pb
- lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
- SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
- mb
-
-//orig or r31, 1, r0 // get a one
-//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
-//orig mb
-
- lda r1, -CNS_Q_IPR(r1) // back to the base
- lda r1, 0x200(r1) // Point to center of CPU segment
- or r31, 1, r0 // get a one
- SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
- mb
-
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
- lda r1, -0x200(r1) // Point to center of CPU segment
-
- mtpr r31, dtb_ia // clear the dtb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr savsta, bsr=1, dest=1
- ret r31, (r3) // and back we go
-#endif
-
-
-#if remove_restore_state == 0
-
-
-// .sbttl "PAL_RESTORE_STATE"
-//+
-//
-// Pal_restore_state
-//
-//
-// register usage:
-// r1 = addr of impure area
-// r3 = return_address
-// all other regs are scratchable, as they are about to
-// be reloaded from ram.
-//
-// Function:
-// All chip state restored, all SRs, FRs, PTs, IPRs
-// *** except R1, R3, PT0, PT4, PT5 ***
-//
-//-
- ALIGN_BLOCK
-pal_restore_state:
-
-//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
-
-//orig // map the console io area virtually
-//orig mtpr r31, dtb_ia // clear the dtb
-//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r1, dtb_tag // write TB tag
-//orig
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too, in case impure area crosses page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
-
- lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
-//orig // save all floating regs
-//orig mfpr r0, icsr // get icsr
-//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
-//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
-//orig or r2, r0, r0 // set FEN on
-//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
-
- mfpr r0, icsr // Get current ICSR
- bis zero, 1, r2 // Get a '1'
- or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
- sll r2, icsr_v_fpe, r2 // Shift bits into position
- bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
- mtpr r0, icsr // Update the chip
-
- mfpr r31, pt0 // FPE bubble cycle 1 //orig
- mfpr r31, pt0 // FPE bubble cycle 2 //orig
- mfpr r31, pt0 // FPE bubble cycle 3 //orig
-
-//orig fix_impure_ipr r1
-//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
-//orig mt_fpcr f0
-//orig
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
-//orig
-//orig // restore all floating regs
-//orig#define t 0
-//orig .repeat 32
-//orig restore_reg \t , fpu=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, 200(r1) // Point to base of IPR area again
- RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
- mt_fpcr f0 // original
-
- lda r1, 0x200(r1) // point to center of CPU segment
- RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
- RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
- RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
- RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
- RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
- RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
- RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
- RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
- RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
- RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
- RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
- RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
- RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
- RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
- RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
- RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
- RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
- RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
- RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
- RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
- RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig
-//orig // restore all pal regs
-//orig#define t 1
-//orig .repeat 23
-//orig restore_reg \t , pal=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore base address of impure area.
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
- RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
- RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
- RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
- RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
- RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
- RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
- RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
- RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
- RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
- RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
- RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
- RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
- RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
- RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
- RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
- RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
- RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
- RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
- RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
- RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
-
-//orig restore_reg exc_addr, ipr=1 // restore ipr
-//orig restore_reg pal_base, ipr=1 // restore ipr
-//orig restore_reg ipl, ipr=1 // restore ipr
-//orig restore_reg ps, ipr=1 // restore ipr
-//orig mtpr r0, dtb_cm // set current mode in mbox too
-//orig restore_reg itb_asn, ipr=1
-//orig srl r0, itb_asn_v_asn, r0
-//orig sll r0, dtb_asn_v_asn, r0
-//orig mtpr r0, dtb_asn // set ASN in Mbox too
-//orig restore_reg ivptbr, ipr=1
-//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
-//orig restore_reg mcsr, ipr=1
-//orig restore_reg aster, ipr=1
-//orig restore_reg astrr, ipr=1
-//orig restore_reg sirr, ipr=1
-//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
-//orig mfpr r31, pt0 // (may issue with mt maf_mode)
-//orig mfpr r31, pt0 // bubble cycle 1
-//orig mfpr r31, pt0 // bubble cycle 2
-//orig mfpr r31, pt0 // bubble cycle 3
-//orig mfpr r31, pt0 // (may issue with following ld)
-
- // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
- RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- RESTORE_IPR(ipl,CNS_Q_IPL,r1)
- RESTORE_IPR(ips,CNS_Q_IPS,r1)
- mtpr r0, dtbCm // Set Mbox current mode too.
- RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- srl r0, 4, r0
- sll r0, 57, r0
- mtpr r0, dtbAsn // Set Mbox ASN too
- RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- mtpr r0, mVptBr // Set Mbox VptBr too
- RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
- RESTORE_IPR(aster,CNS_Q_ASTER,r1)
- RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
- RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
- RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
- STALL
- STALL
- STALL
- STALL
- STALL
-
-
- // restore all integer shadow regs
-//orig#define t 8
-//orig .repeat 7
-//orig restore_reg \t, shadow=1
-//orig#define t t + 1
-//orig .endr
-//orig restore_reg 25, shadow=1
-//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
-
- RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
- RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
- //
- // Get out of shadow mode
- //
-
- mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
- mfpr r31, pt0 // "" //orig
- mfpr r0, icsr // Get icsr //orig
-//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
- bic r0, r2, r2 // ICSR with SDE clear //orig
- mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-//orig // switch impure pointer from ipr to gpr area --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig // restore all integer regs
-//orig#define t 4
-//orig .repeat 28
-//orig restore_reg \t
-//orig#define t t + 1
-//orig .endr
-
-// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
-
- lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-
- RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
- RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
- RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
- RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
- RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
- RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
- RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
- RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
- RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
- RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
- RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
- RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
- RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
- RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
- RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
- RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
- RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
-
- lda t0, -0x200(t0) // Restore base address of impure area.
- lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
- RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
-
-//orig // and back again --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
-//orig mb
-
- lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
- lda t0, 0x200(t0) // and back to center of CPU segment
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
- mb
-
-//orig // and back we go
-//orig// restore_reg 3
-//orig restore_reg 2
-//orig// restore_reg 1
-//orig restore_reg 0
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
-
- RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
- RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
- lda r1, -0x200(r1) // Restore impure base address
-
- mfpr r31, pt0 // stall for ldqp above //orig
-
- mtpr r31, dtb_ia // clear the tb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr rststa, bsr=1, dest=1
- ret r31, (r3) // back we go //orig
-#endif
-
-
-//+
-// pal_pal_bug_check -- code has found a bugcheck situation.
-// Set things up and join common machine check flow.
-//
-// Input:
-// r14 - exc_addr
-//
-// On exit:
-// pt0 - saved r0
-// pt1 - saved r1
-// pt4 - saved r4
-// pt5 - saved r5
-// pt6 - saved r6
-// pt10 - saved exc_addr
-// pt_misc<47:32> - mchk code
-// pt_misc<31:16> - scb vector
-// r14 - base of Cbox IPRs in IO space
-// MCES<mchk> is set
-//-
-
- ALIGN_BLOCK
- .globl pal_pal_bug_check_from_int
-pal_pal_bug_check_from_int:
- DEBUGSTORE(0x79)
-//simos DEBUG_EXC_ADDR()
- DEBUGSTORE(0x20)
-//simos bsr r25, put_hex
- lda r25, mchk_c_bugcheck(r31)
- addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
- br r31, pal_pal_mchk
- nop
-
-pal_pal_bug_check:
- lda r25, mchk_c_bugcheck(r31)
-
-pal_pal_mchk:
- sll r25, 32, r25 // Move mchk code to position
-
- mtpr r14, pt10 // Stash exc_addr
- mtpr r14, exc_addr
-
- mfpr r12, pt_misc // Get MCES and scratch
- zap r12, 0x3c, r12
-
- or r12, r25, r12 // Combine mchk code
- lda r25, scb_v_procmchk(r31) // Get SCB vector
-
- sll r25, 16, r25 // Move SCBv to position
- or r12, r25, r25 // Combine SCBv
-
- mtpr r0, pt0 // Stash for scratch
- bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
-
- mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
- ldah r14, 0xfff0(r31)
-
- mtpr r1, pt1 // Stash for scratch
- zap r14, 0xE0, r14 // Get Cbox IPR base
-
- mtpr r4, pt4
- mtpr r5, pt5
-
- mtpr r6, pt6
- blbs r12, sys_double_machine_check // MCHK halt if double machine check
-
- br r31, sys_mchk_collect_iprs // Join common machine check flow
-
-// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
-
-// .sbttl "HALT - PALcode for HALT instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// GO to console code
-//
-//-
-
- .text 1
-// . = 0x2000
- CALL_PAL_PRIV(PAL_HALT_ENTRY)
-call_pal_halt:
-#if rax_mode == 0
- mfpr r31, pt0 // Pad exc_addr read
- mfpr r31, pt0
-
- mfpr r12, exc_addr // get PC
- subq r12, 4, r12 // Point to the HALT
-
- mtpr r12, exc_addr
- mtpr r0, pt0
-
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
- lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
- br r31, sys_enter_console // enter the console
-
-#else // RAX mode
- mb
- mb
- mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
- mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
- mtpr r8, exc_addr // no HW_REI for 1 cycle.
- blbc r9, not_begin_case
- mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
- mtpr r31, ev5__itb_ia // clear ITB.
-
-not_begin_case:
- nop
- nop
-
- nop
- nop // pad mt itb_asn ->hw_rei_stall
-
- hw_rei_stall
-#endif
-
-// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// R16 - contains the PFN of the page to be flushed
-//
-// Function:
-// Flush all Dstream caches of 1 entire page
-// The CFLUSH routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
-Call_Pal_Cflush:
- br r31, sys_cflush
-
-// .sbttl "DRAINA - PALcode for DRAINA instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Implicit TRAPB performed by hardware.
-//
-// Function:
-// Stall instruction issue until all prior instructions are guaranteed to
-// complete without incurring aborts. For the EV5 implementation, this
-// means waiting until all pending DREADS are returned.
-//
-//-
-
- CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
-Call_Pal_Draina:
- ldah r14, 0x100(r31) // Init counter. Value?
- nop
-
-DRAINA_LOOP:
- subq r14, 1, r14 // Decrement counter
- mfpr r13, ev5__maf_mode // Fetch status bit
-
- srl r13, maf_mode_v_dread_pending, r13
- ble r14, DRAINA_LOOP_TOO_LONG
-
- nop
- blbs r13, DRAINA_LOOP // Wait until all DREADS clear
-
- hw_rei
-
-DRAINA_LOOP_TOO_LONG:
- br r31, call_pal_halt
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0003)
-CallPal_OpcDec03:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0004)
-CallPal_OpcDec04:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0005)
-CallPal_OpcDec05:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0006)
-CallPal_OpcDec06:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0007)
-CallPal_OpcDec07:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0008)
-CallPal_OpcDec08:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "CSERVE- PALcode for CSERVE instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Various functions for private use of console software
-//
-// option selector in r0
-// arguments in r16....
-// The CSERVE routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
-Call_Pal_Cserve:
- br r31, sys_cserve
-
-// .sbttl "swppal - PALcode for swppal instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Vectored into via hardware PALcode instruction dispatch.
-// R16 contains the new PAL identifier
-// R17:R21 contain implementation-specific entry parameters
-//
-// R0 receives status:
-// 0 success (PAL was switched)
-// 1 unknown PAL variant
-// 2 known PAL variant, but PAL not loaded
-//
-//
-// Function:
-// Swap control to another PAL.
-//-
-
- CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
-Call_Pal_Swppal:
- cmpule r16, 255, r0 // see if a kibble was passed
- cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
-
- or r16, r31, r3 // set r3 incase this is a address
- blbc r0, swppal_cont // nope, try it as an address
-
- cmpeq r16, 2, r0 // is it our friend OSF?
- blbc r0, swppal_fail // nope, don't know this fellow
-
- br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
-
-// .global osfpal_hw_entry_reset
-// .weak osfpal_hw_entry_reset
-// .long <osfpal_hw_entry_reset-pal_start>
-//orig halt // don't know how to get the address here - kludge ok, load pal at 0
- .long 0 // ?? hack upon hack...pb
-
-CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
-// ble r3, swppal_fail ; if OSF not linked in say not loaded.
- mfpr r2, pal_base // fetch pal base
-
- addq r2, r3, r3 // add pal base
- lda r2, 0x3FFF(r31) // get pal base checker mask
-
- and r3, r2, r2 // any funky bits set?
- cmpeq r2, 0, r0 //
-
- blbc r0, swppal_fail // return unknown if bad bit set.
- br r31, swppal_cont
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000B)
-CallPal_OpcDec0B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000C)
-CallPal_OpcDec0C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wripir- PALcode for wripir instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// r16 = processor number to interrupt
-//
-// Function:
-// IPIR <- R16
-// Handled in system-specific code
-//
-// Exit:
-// interprocessor interrupt is recorded on the target processor
-// and is initiated when the proper enabling conditions are present.
-//-
-
- CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
-Call_Pal_Wrpir:
- br r31, sys_wripir
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000E)
-CallPal_OpcDec0E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000F)
-CallPal_OpcDec0F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdmces- PALcode for rdmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// R0 <- ZEXT(MCES)
-//-
-
- CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
-Call_Pal_Rdmces:
- mfpr r0, pt_mces // Read from PALtemp
- and r0, mces_m_all, r0 // Clear other bits
-
- hw_rei
-
-// .sbttl "wrmces- PALcode for wrmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
-// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
-// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
-// MCES<3> <- R16<3> (DPC)
-// MCES<4> <- R16<4> (DSC)
-//
-//-
-
- CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
-Call_Pal_Wrmces:
- and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
- mfpr r14, pt_mces // Get current value
-
- ornot r31, r13, r13 // Flip all the bits
- and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
-
- and r14, r13, r1 // Update MCHK, SCE, PCE
- bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
-
- or r1, r17, r1 // Update DPC and DSC
- mtpr r1, pt_mces // Write MCES back
-
-#if rawhide_system == 0
- nop // Pad to fix PT write->read restriction
-#else
- blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
-#endif
-
- nop
- hw_rei
-
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0012)
-CallPal_OpcDec12:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0013)
-CallPal_OpcDec13:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0014)
-CallPal_OpcDec14:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0015)
-CallPal_OpcDec15:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0016)
-CallPal_OpcDec16:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0017)
-CallPal_OpcDec17:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0018)
-CallPal_OpcDec18:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0019)
-CallPal_OpcDec19:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001A)
-CallPal_OpcDec1A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001B)
-CallPal_OpcDec1B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001C)
-CallPal_OpcDec1C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001D)
-CallPal_OpcDec1D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001E)
-CallPal_OpcDec1E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001F)
-CallPal_OpcDec1F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0020)
-CallPal_OpcDec20:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0021)
-CallPal_OpcDec21:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0022)
-CallPal_OpcDec22:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0023)
-CallPal_OpcDec23:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0024)
-CallPal_OpcDec24:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0025)
-CallPal_OpcDec25:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0026)
-CallPal_OpcDec26:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0027)
-CallPal_OpcDec27:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0028)
-CallPal_OpcDec28:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0029)
-CallPal_OpcDec29:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002A)
-CallPal_OpcDec2A:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrfen - PALcode for wrfen instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// a0<0> -> ICSR<FPE>
-// Store new FEN in PCB
-// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
-//
-// Issue: What about pending FP loads when FEN goes from on->off????
-//-
-
- CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
-Call_Pal_Wrfen:
- or r31, 1, r13 // Get a one
- mfpr r1, ev5__icsr // Get current FPE
-
- sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
- and r16, 1, r16 // clean new fen
-
- sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
- bic r1, r13, r1 // zero icsr<fpe>
-
- or r1, r12, r1 // Or new FEN into ICSR
- mfpr r12, pt_pcbb // Get PCBB - E1
-
- mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
- stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
-
- mfpr r31, pt0 // Pad ICSR<FPE> write.
- mfpr r31, pt0
-
- mfpr r31, pt0
-// pvc_violate 225 // cuz PVC can't distinguish which bits changed
- hw_rei
-
-
- CALL_PAL_PRIV(0x002C)
-CallPal_OpcDec2C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// vptptr <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
-Call_Pal_Wrvptptr:
- mtpr r16, ev5__mvptbr // Load Mbox copy
- mtpr r16, ev5__ivptbr // Load Ibox copy
- nop // Pad IPR write
- nop
- hw_rei
-
- CALL_PAL_PRIV(0x002E)
-CallPal_OpcDec2E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002F)
-CallPal_OpcDec2F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "swpctx- PALcode for swpctx instruction"
-
-//+
-//
-// Entry:
-// hardware dispatch via callPal instruction
-// R16 -> new pcb
-//
-// Function:
-// dynamic state moved to old pcb
-// new state loaded from new pcb
-// pcbb pointer set
-// old pcbb returned in R0
-//
-// Note: need to add perf monitor stuff
-//-
-
- CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
-Call_Pal_Swpctx:
- rpcc r13 // get cyccounter
- mfpr r0, pt_pcbb // get pcbb
-
- ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
- ldqp r23, osfpcb_l_cc(r16) // get new asn
-
- srl r13, 32, r25 // move offset
- mfpr r24, pt_usp // get usp
-
- stqp r30, osfpcb_q_ksp(r0) // store old ksp
-// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
- mtpr r16, pt_pcbb // set new pcbb
-
- stqp r24, osfpcb_q_usp(r0) // store usp
- addl r13, r25, r25 // merge for new time
-
- stlp r25, osfpcb_l_cc(r0) // save time
- ldah r24, (1<<(icsr_v_fpe-16))(r31)
-
- and r22, 1, r12 // isolate fen
- mfpr r25, icsr // get current icsr
-
- ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
- br r31, swpctx_cont
-
-// .sbttl "wrval - PALcode for wrval instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// sysvalue <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
-Call_Pal_Wrval:
- nop
- mtpr r16, pt_sysval // Pad paltemp write
- nop
- nop
- hw_rei
-
-
-// .sbttl "rdval - PALcode for rdval instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- sysvalue
-//-
-
- CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
-Call_Pal_Rdval:
- nop
- mfpr r0, pt_sysval
- nop
- hw_rei
-
-// .sbttl "tbi - PALcode for tbi instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// TB invalidate
-// r16/a0 = TBI type
-// r17/a1 = Va for TBISx instructions
-//-
-
- CALL_PAL_PRIV(PAL_TBI_ENTRY)
-Call_Pal_Tbi:
- addq r16, 2, r16 // change range to 0-2
- br r23, CALL_PAL_tbi_10_ // get our address
-
-CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
- lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
- sll r16, 4, r16 // * 16
- blbc r22, CALL_PAL_tbi_30_ // go rei, if not
-
- addq r23, r16, r23 // addr of our code
-//orig pvc_jsr tbi
- jmp r31, (r23) // and go do it
-
-CALL_PAL_tbi_30_:
- hw_rei
- nop
-
-// .sbttl "wrent - PALcode for wrent instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Update ent* in paltemps
-// r16/a0 = Address of entry routine
-// r17/a1 = Entry Number 0..5
-//
-// r22, r23 trashed
-//-
-
- CALL_PAL_PRIV(PAL_WRENT_ENTRY)
-Call_Pal_Wrent:
- cmpult r17, 6, r22 // see if in range
- br r23, CALL_PAL_wrent_10_ // get our address
-
-CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
- blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
-
- lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
- sll r17, 4, r17 // *16
-
- addq r17, r23, r23 // Get address in table
-//orig pvc_jsr wrent
- jmp r31, (r23) // and go do it
-
-CALL_PAL_wrent_30_:
- hw_rei // out of range, just return
-
-// .sbttl "swpipl - PALcode for swpipl instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- PS<IPL>
-// PS<IPL> <- a0<2:0> (r16)
-//
-// t8 (r22) is scratch
-//-
-
- CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
-Call_Pal_Swpipl:
- and r16, osfps_m_ipl, r16 // clean New ipl
- mfpr r22, pt_intmask // get int mask
-
- extbl r22, r16, r22 // get mask for this ipl
- bis r11, r31, r0 // return old ipl
-
- bis r16, r31, r11 // set new ps
- mtpr r22, ev5__ipl // set new mask
-
- mfpr r31, pt0 // pad ipl write
- mfpr r31, pt0 // pad ipl write
-
- hw_rei // back
-
-// .sbttl "rdps - PALcode for rdps instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- ps
-//-
-
- CALL_PAL_PRIV(PAL_RDPS_ENTRY)
-Call_Pal_Rdps:
- bis r11, r31, r0 // Fetch PALshadow PS
- nop // Must be 2 cycles long
- hw_rei
-
-// .sbttl "wrkgp - PALcode for wrkgp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// kgp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
-Call_Pal_Wrkgp:
- nop
- mtpr r16, pt_kgp
- nop // Pad for pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrusp - PALcode for wrusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// usp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
-Call_Pal_Wrusp:
- nop
- mtpr r16, pt_usp
- nop // Pad possible pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-//
-// Function:
-// Various control functions for the onchip performance counters
-//
-// option selector in r16
-// option argument in r17
-// returned status in r0
-//
-//
-// r16 = 0 Disable performance monitoring for one or more cpu's
-// r17 = 0 disable no counters
-// r17 = bitmask disable counters specified in bit mask (1=disable)
-//
-// r16 = 1 Enable performance monitoring for one or more cpu's
-// r17 = 0 enable no counters
-// r17 = bitmask enable counters specified in bit mask (1=enable)
-//
-// r16 = 2 Mux select for one or more cpu's
-// r17 = Mux selection (cpu specific)
-// <24:19> bc_ctl<pm_mux_sel> field (see spec)
-// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
-//
-// r16 = 3 Options
-// r17 = (cpu specific)
-// <0> = 0 log all processes
-// <0> = 1 log only selected processes
-// <30,9,8> mode select - ku,kp,kk
-//
-// r16 = 4 Interrupt frequency select
-// r17 = (cpu specific) indicates interrupt frequencies desired for each
-// counter, with "zero interrupts" being an option
-// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
-//
-// r16 = 5 Read Counters
-// r17 = na
-// r0 = value (same format as ev5 pmctr)
-// <0> = 0 Read failed
-// <0> = 1 Read succeeded
-//
-// r16 = 6 Write Counters
-// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
-//
-// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
-// r17 = 0 enable no counters
-// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
-//
-//=============================================================================
-//Assumptions:
-//PMCTR_CTL:
-//
-// <15:14> CTL0 -- encoded frequency select and enable - CTR0
-// <13:12> CTL1 -- " - CTR1
-// <11:10> CTL2 -- " - CTR2
-//
-// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
-// <7:6> FRQ1 -- frequency select for CTR1
-// <5:4> FRQ2 -- frequency select for CTR2
-//
-// <0> all vs. select processes (0=all,1=select)
-//
-// where
-// FRQx<1:0>
-// 0 1 disable interrupt
-// 1 0 frequency = 65536 (16384 for ctr2)
-// 1 1 frequency = 256
-// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
-//
-//=============================================================================
-//
- CALL_PAL_PRIV(0x0039)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_Wrperfmon:
-#if perfmon_debug == 0
- // "real" performance monitoring code
- cmpeq r16, 1, r0 // check for enable
- bne r0, perfmon_en // br if requested to enable
-
- cmpeq r16, 2, r0 // check for mux ctl
- bne r0, perfmon_muxctl // br if request to set mux controls
-
- cmpeq r16, 3, r0 // check for options
- bne r0, perfmon_ctl // br if request to set options
-
- cmpeq r16, 4, r0 // check for interrupt frequency select
- bne r0, perfmon_freq // br if request to change frequency select
-
- cmpeq r16, 5, r0 // check for counter read request
- bne r0, perfmon_rd // br if request to read counters
-
- cmpeq r16, 6, r0 // check for counter write request
- bne r0, perfmon_wr // br if request to write counters
-
- cmpeq r16, 7, r0 // check for counter clear/enable request
- bne r0, perfmon_enclr // br if request to clear/enable counters
-
- beq r16, perfmon_dis // br if requested to disable (r16=0)
- br r31, perfmon_unknown // br if unknown request
-#else
-
- br r31, pal_perfmon_debug
-#endif
-
-// .sbttl "rdusp - PALcode for rdusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- usp
-//-
-
- CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
-Call_Pal_Rdusp:
- nop
- mfpr r0, pt_usp
- hw_rei
-
-
- CALL_PAL_PRIV(0x003B)
-CallPal_OpcDec3B:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "whami - PALcode for whami instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- whami
-//-
- CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
-Call_Pal_Whami:
- nop
- mfpr r0, pt_whami // Get Whami
- extbl r0, 1, r0 // Isolate just whami bits
- hw_rei
-
-// .sbttl "retsys - PALcode for retsys instruction"
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// 00(sp) contains return pc
-// 08(sp) contains r29
-//
-// Function:
-// Return from system call.
-// mode switched from kern to user.
-// stacks swapped, ugp, upc restored.
-// r23, r25 junked
-//-
-
- CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
-Call_Pal_Retsys:
- lda r25, osfsf_c_size(sp) // pop stack
- bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
-
- mfpr r14, exc_addr // save exc_addr in case of fault
- ldq r23, osfsf_pc(sp) // get pc
-
- ldq r29, osfsf_gp(sp) // get gp
- stl_c r31, -4(sp) // clear lock_flag
-
- lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
- mfpr r30, pt_usp // get users stack
-
- bic r23, 3, r23 // clean return pc
- mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
-
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
- mtpr r25, pt_ksp // save kern stack
-
- rc r31 // clear inter_flag
-// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
- hw_rei_spe // and back
-
-
- CALL_PAL_PRIV(0x003E)
-CallPal_OpcDec3E:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rti - PALcode for rti instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// 00(sp) -> ps
-// 08(sp) -> pc
-// 16(sp) -> r29 (gp)
-// 24(sp) -> r16 (a0)
-// 32(sp) -> r17 (a1)
-// 40(sp) -> r18 (a3)
-//-
-
- CALL_PAL_PRIV(PAL_RTI_ENTRY)
-#ifdef SIMOS
- /* called once by platform_tlaser */
- .globl Call_Pal_Rti
-#endif
-Call_Pal_Rti:
- lda r25, osfsf_c_size(sp) // get updated sp
- bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
-
- mfpr r14, exc_addr // save PC in case of fault
- rc r31 // clear intr_flag
-
- ldq r12, -6*8(r25) // get ps
- ldq r13, -5*8(r25) // pc
-
- ldq r18, -1*8(r25) // a2
- ldq r17, -2*8(r25) // a1
-
- ldq r16, -3*8(r25) // a0
- ldq r29, -4*8(r25) // gp
-
- bic r13, 3, r13 // clean return pc
- stl_c r31, -4(r25) // clear lock_flag
-
- and r12, osfps_m_mode, r11 // get mode
- mtpr r13, exc_addr // set return address
-
- beq r11, rti_to_kern // br if rti to Kern
- br r31, rti_to_user // out of call_pal space
-
-
-// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
-// .sbttl "bpt- PALcode for bpt instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- .text 1
-// . = 0x3000
- CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
-Call_Pal_Bpt:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bpt_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bpt, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "bugchk- PALcode for bugchk instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
-Call_Pal_Bugchk:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bugchk_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bugchk, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
- CALL_PAL_UNPRIV(0x0082)
-CallPal_OpcDec82:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "callsys - PALcode for callsys instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Switch mode to kernel and build a callsys stack frame.
-// sp = ksp
-// gp = kgp
-// t8 - t10 (r22-r24) trashed
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
-Call_Pal_Callsys:
-
- and r11, osfps_m_mode, r24 // get mode
- mfpr r22, pt_ksp // get ksp
-
- beq r24, sys_from_kern // sysCall from kern is not allowed
- mfpr r12, pt_entsys // get address of callSys routine
-
-//+
-// from here on we know we are in user going to Kern
-//-
- mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- bis r31, r31, r11 // PS=0 (mode=kern)
- mfpr r23, exc_addr // get pc
-
- mtpr r30, pt_usp // save usp
- lda sp, 0-osfsf_c_size(r22)// set new sp
-
- stq r29, osfsf_gp(sp) // save user gp/r29
- stq r24, osfsf_ps(sp) // save ps
-
- stq r23, osfsf_pc(sp) // save pc
- mtpr r12, exc_addr // set address
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kern gp/r29
-
- hw_rei_spe // and off we go!
-
-
- CALL_PAL_UNPRIV(0x0084)
-CallPal_OpcDec84:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0085)
-CallPal_OpcDec85:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "imb - PALcode for imb instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Flush the writebuffer and flush the Icache
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
-Call_Pal_Imb:
- mb // Clear the writebuffer
- mfpr r31, ev5__mcsr // Sync with clear
- nop
- nop
- br r31, pal_ic_flush // Flush Icache
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x0087)
-CallPal_OpcDec87:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0088)
-CallPal_OpcDec88:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0089)
-CallPal_OpcDec89:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008A)
-CallPal_OpcDec8A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008B)
-CallPal_OpcDec8B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008C)
-CallPal_OpcDec8C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008D)
-CallPal_OpcDec8D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008E)
-CallPal_OpcDec8E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008F)
-CallPal_OpcDec8F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0090)
-CallPal_OpcDec90:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0091)
-CallPal_OpcDec91:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0092)
-CallPal_OpcDec92:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0093)
-CallPal_OpcDec93:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0094)
-CallPal_OpcDec94:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0095)
-CallPal_OpcDec95:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0096)
-CallPal_OpcDec96:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0097)
-CallPal_OpcDec97:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0098)
-CallPal_OpcDec98:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0099)
-CallPal_OpcDec99:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009A)
-CallPal_OpcDec9A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009B)
-CallPal_OpcDec9B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009C)
-CallPal_OpcDec9C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009D)
-CallPal_OpcDec9D:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdunique - PALcode for rdunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- unique
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
-CALL_PALrdunique_:
- mfpr r0, pt_pcbb // get pcb pointer
- ldqp r0, osfpcb_q_unique(r0) // get new value
-
- hw_rei
-
-// .sbttl "wrunique - PALcode for wrunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// unique <- a0 (r16)
-//
-//-
-//
-CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
-CALL_PAL_Wrunique:
- nop
- mfpr r12, pt_pcbb // get pcb pointer
- stqp r16, osfpcb_q_unique(r12)// get new value
- nop // Pad palshadow write
- hw_rei // back
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00A0)
-CallPal_OpcDecA0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A1)
-CallPal_OpcDecA1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A2)
-CallPal_OpcDecA2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A3)
-CallPal_OpcDecA3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A4)
-CallPal_OpcDecA4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A5)
-CallPal_OpcDecA5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A6)
-CallPal_OpcDecA6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A7)
-CallPal_OpcDecA7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A8)
-CallPal_OpcDecA8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A9)
-CallPal_OpcDecA9:
- br r31, osfpal_calpal_opcdec
-
-
-// .sbttl "gentrap - PALcode for gentrap instruction"
-//+
-// CALL_PAL_gentrap:
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- CALL_PAL_UNPRIV(0x00AA)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_gentrap:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_gentrap_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_gentrap, r16// set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00AB)
-CallPal_OpcDecAB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AC)
-CallPal_OpcDecAC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AD)
-CallPal_OpcDecAD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AE)
-CallPal_OpcDecAE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AF)
-CallPal_OpcDecAF:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B0)
-CallPal_OpcDecB0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B1)
-CallPal_OpcDecB1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B2)
-CallPal_OpcDecB2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B3)
-CallPal_OpcDecB3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B4)
-CallPal_OpcDecB4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B5)
-CallPal_OpcDecB5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B6)
-CallPal_OpcDecB6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B7)
-CallPal_OpcDecB7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B8)
-CallPal_OpcDecB8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B9)
-CallPal_OpcDecB9:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BA)
-CallPal_OpcDecBA:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BB)
-CallPal_OpcDecBB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BC)
-CallPal_OpcDecBC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BD)
-CallPal_OpcDecBD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BE)
-CallPal_OpcDecBE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BF)
-CallPal_OpcDecBF:
- // MODIFIED BY EGH 2/25/04
- br r31, copypal_impl
-
-
-/*======================================================================*/
-/* OSF/1 CALL_PAL CONTINUATION AREA */
-/*======================================================================*/
-
- .text 2
-
- . = 0x4000
-
-
-// .sbttl "Continuation of MTPR_PERFMON"
- ALIGN_BLOCK
-#if perfmon_debug == 0
- // "real" performance monitoring code
-// mux ctl
-perfmon_muxctl:
- lda r8, 1(r31) // get a 1
- sll r8, pmctr_v_sel0, r8 // move to sel0 position
- or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
- and r17, r8, r25 // isolate pmctr mux select bits
- mfpr r0, ev5__pmctr
- bic r0, r8, r0 // clear old mux select bits
- or r0,r25, r25 // or in new mux select bits
- mtpr r25, ev5__pmctr
-
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, bc_ctl_v_pm_mux_sel, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
- br r31, perfmon_success
-
-
-// requested to disable perf monitoring
-perfmon_dis:
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
-perfmon_dis_ctr0: // and begin with ctr0
- blbc r17, perfmon_dis_ctr1 // do not disable ctr0
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl0, r8
- bic r14, r8, r14 // disable ctr0
-perfmon_dis_ctr1:
- srl r17, 1, r17
- blbc r17, perfmon_dis_ctr2 // do not disable ctr1
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl1, r8
- bic r14, r8, r14 // disable ctr1
-perfmon_dis_ctr2:
- srl r17, 1, r17
- blbc r17, perfmon_dis_update // do not disable ctr2
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl2, r8
- bic r14, r8, r14 // disable ctr2
-perfmon_dis_update:
- mtpr r14, ev5__pmctr // update pmctr ipr
-//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
-// adapted from ev5_pal_macros.mar
-//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
-
- lda r17, 0x3F(r31) // build mask
- sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
- and r14, r17, r14 // isolate ctl bits
- bic r8, r17, r8 // clear out old ctl bits
- or r14, r8, r14 // create shadow ctl bits
-//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
-//adjusted impure pointer still in r25
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
-
- br r31, perfmon_success
-
-
-// requested to enable perf monitoring
-//;the following code can be greatly simplified for pass2, but should work fine as is.
-
-
-perfmon_enclr:
- lda r9, 1(r31) // set enclr flag
- br perfmon_en_cont
-
-perfmon_en:
- bis r31, r31, r9 // clear enclr flag
-
-perfmon_en_cont:
- mfpr r8, pt_pcbb // get PCB base
-//orig get_pmctr_ctl r25, r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
-
- ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
- srl r16, osfpcb_v_pme, r16 // get pme bit
- mfpr r13, icsr
- and r16, 1, r16 // isolate pme bit
-
- // this code only needed in pass2 and later
-//orig sget_addr r12, 1<<icsr_v_pmp, r31
- lda r12, 1<<icsr_v_pmp(r31) // pb
- bic r13, r12, r13 // clear pmp bit
- sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
- or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
- ev5_pass2 mtpr r13, icsr // update icsr
-
-#if ev5_p1 != 0
- lda r12, 1(r31)
- cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
-#else
- bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
-#endif
-
- sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
- bis r14, r31, r13 // copy pmctr
-
-perfmon_en_ctr0: // and begin with ctr0
- blbc r17, perfmon_en_ctr1 // do not enable ctr0
-
- blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr0<15:0> mask
- sll r8, pmctr_v_ctr0, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr0:
-//orig get_addr r8, 3<<pmctr_v_ctl0, r31
- LDLI(r8, (3<<pmctr_v_ctl0))
- and r25, r8, r12 //isolate frequency select bits for ctr0
- bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl0 bits
-
-perfmon_en_ctr1: // enable ctr1
- srl r17, 1, r17 // get ctr1 enable
- blbc r17, perfmon_en_ctr2 // do not enable ctr1
-
- blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr1<15:0> mask
- sll r8, pmctr_v_ctr1, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr1:
-//orig get_addr r8, 3<<pmctr_v_ctl1, r31
- LDLI(r8, (3<<pmctr_v_ctl1))
- and r25, r8, r12 //isolate frequency select bits for ctr1
- bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl1 bits
-
-perfmon_en_ctr2: // enable ctr2
- srl r17, 1, r17 // get ctr2 enable
- blbc r17, perfmon_en_return // do not enable ctr2 - return
-
- blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr2:
-//orig get_addr r8, 3<<pmctr_v_ctl2, r31
- LDLI(r8, (3<<pmctr_v_ctl2))
- and r25, r8, r12 //isolate frequency select bits for ctr2
- bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl2 bits
-
-perfmon_en_return:
- cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
- // else only do the counter clears
- mtpr r13, ev5__pmctr // update pmctr ipr
-
-//;this code not needed for pass2 and later, but does not hurt to leave it in
- lda r8, 0x3F(r31)
-//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
-
- sll r8, pmctr_v_ctl2, r8 // build ctl mask
- and r8, r14, r14 // isolate new ctl bits
- bic r25, r8, r25 // clear out old ctl value
- or r25, r14, r14 // create new pmctr_ctl
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-
-// options...
-perfmon_ctl:
-
-// set mode
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
-//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
- LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
- mfpr r0, ev5__pmctr
- and r17, r8, r25 // isolate pmctr mode bits
- bic r0, r8, r0 // clear old mode bits
- or r0, r25, r25 // or in new mode bits
- mtpr r25, ev5__pmctr
-
-//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
- mfpr r8, icsr
- lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
- bic r8, r25, r8 // clear old pma bit
- cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
- or r8, r25, r8
- ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
- mfpr r31, pt0 // pad icsr write
- mfpr r31, pt0 // pad icsr write
-
-//;the following code not needed for pass2 and later, but should work anyway.
- bis r14, 1, r14 // set for select processes
- blbs r17, perfmon_sp // branch if select processes
- bic r14, 1, r14 // all processes
-perfmon_sp:
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
- br r31, perfmon_success
-
-// counter frequency select
-perfmon_freq:
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
- lda r8, 0x3F(r31)
-//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
-// I guess this should be a shift of 4 bits from the above control register structure .. pb
-#define pmctr_ctl_v_frq2_SHIFT 4
- sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
-
- and r8, r17, r17
- bic r14, r8, r14 // clear out old frequency select bits
-
- or r17, r14, r14 // or in new frequency select info
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-// read counters
-perfmon_rd:
- mfpr r0, ev5__pmctr
- or r0, 1, r0 // or in return status
- hw_rei // back to user
-
-// write counters
-perfmon_wr:
- mfpr r14, ev5__pmctr
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
-
-//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
- LDLI(r9, (0xFFFFFFFF))
- sll r9, pmctr_v_ctr1, r9
- or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
- bic r14, r8, r14 // clear ctr fields
- and r17, r8, r25 // clear all but ctr fields
- or r25, r14, r14 // write ctr fields
- mtpr r14, ev5__pmctr // update pmctr ipr
-
- mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
-
-perfmon_success:
- or r31, 1, r0 // set success
- hw_rei // back to user
-
-perfmon_unknown:
- or r31, r31, r0 // set fail
- hw_rei // back to user
-
-#else
-
-// end of "real code", start of debug code
-
-//+
-// Debug environment:
-// (in pass2, always set icsr<pma> to ensure master counter enable is on)
-// R16 = 0 Write to on-chip performance monitor ipr
-// r17 = on-chip ipr
-// r0 = return value of read of on-chip performance monitor ipr
-// R16 = 1 Setup Cbox mux selects
-// r17 = Cbox mux selects in same position as in bc_ctl ipr.
-// r0 = return value of read of on-chip performance monitor ipr
-//
-//-
-pal_perfmon_debug:
- mfpr r8, icsr
- lda r9, 1<<icsr_v_pma(r31)
- bis r8, r9, r8
- mtpr r8, icsr
-
- mfpr r0, ev5__pmctr // read old value
- bne r16, cbox_mux_sel
-
- mtpr r17, ev5__pmctr // update pmctr ipr
- br r31, end_pm
-
-cbox_mux_sel:
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, BC_CTL_V_PM_MUX_SEL, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
-end_pm: hw_rei
-
-#endif
-
-
-//;The following code is a workaround for a cpu bug where Istream prefetches to
-//;super-page address space in user mode may escape off-chip.
-#if spe_fix != 0
-
- ALIGN_BLOCK
-hw_rei_update_spe:
- mfpr r12, pt_misc // get previous mode
- srl r11, osfps_v_mode, r10 // isolate current mode bit
- and r10, 1, r10
- extbl r12, 7, r8 // get previous mode field
- and r8, 1, r8 // isolate previous mode bit
- cmpeq r10, r8, r8 // compare previous and current modes
- beq r8, hw_rei_update_spe_5_
- hw_rei // if same, just return
-
-hw_rei_update_spe_5_:
-
-#if fill_err_hack != 0
-
- fill_error_hack
-#endif
-
- mfpr r8, icsr // get current icsr value
- ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
- bic r8, r9, r8 // disable spe
- xor r10, 1, r9 // flip mode for new spe bit
- sll r9, icsr_v_spe+1, r9 // shift into position
- bis r8, r9, r8 // enable/disable spe
- lda r9, 1(r31) // now update our flag
- sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
- bic r12, r9, r12 // clear saved previous mode
- sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
- bis r12, r9, r12 // set saved current mode
- mtpr r12, pt_misc // update pt_misc
- mtpr r8, icsr // update icsr
-
-#if osf_chm_fix != 0
-
-
- blbc r10, hw_rei_update_spe_10_ // branch if not user mode
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
- mtpr r12, dc_mode // Turn on dcache
- mtpr r31, dc_flush // and flush it
- br r31, pal_ic_flush
-
-hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
- ldqp r9, osfpcb_q_Fen(r9) // get FEN
- blbc r9, pal_ic_flush // return if FP disabled
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn off dcache
-#endif
-
-
- br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
-#endif
-
-
-copypal_impl:
- mov r16, r0
- ble r18, finished #if len <=0 we are finished
- ldq_u r8, 0(r17)
- xor r17, r16, r9
- and r9, 7, r9
- and r16, 7, r10
- bne r9, unaligned
- beq r10, aligned
- ldq_u r9, 0(r16)
- addq r18, r10, r18
- mskqh r8, r17, r8
- mskql r9, r17, r9
- bis r8, r9, r8
-aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, aligned_done
-loop:
- stq_u r8, 0(r16)
- ldq_u r8, 8(r17)
- subq r10, 8, r10
- lda r16,8(r16)
- lda r17,8(r17)
- bne r10, loop
-aligned_done:
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
- few_left:
- mskql r8, r18, r10
- ldq_u r9, 0(r16)
- mskqh r9, r18, r9
- bis r10, r9, r10
- stq_u r10, 0(r16)
- br r31, finished
-unaligned:
- addq r17, r18, r25
- cmpule r18, 8, r9
- bne r9, unaligned_few_left
- beq r10, unaligned_dest_aligned
- and r16, 7, r10
- subq r31, r10, r10
- addq r10, 8, r10
- ldq_u r9, 7(r17)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r12
- insql r12, r16, r12
- ldq_u r13, 0(r16)
- mskql r13, r16, r13
- bis r12, r13, r12
- stq_u r12, 0(r16)
- addq r16, r10, r16
- addq r17, r10, r17
- subq r18, r10, r18
- ldq_u r8, 0(r17)
-unaligned_dest_aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, unaligned_partial_left
-unaligned_loop:
- ldq_u r9, 7(r17)
- lda r17, 8(r17)
- extql r8, r17, r12
- extqh r9, r17, r13
- subq r10, 8, r10
- bis r12, r13, r13
- stq r13, 0(r16)
- lda r16, 8(r16)
- beq r10, unaligned_second_partial_left
- ldq_u r8, 7(r17)
- lda r17, 8(r17)
- extql r9, r17, r12
- extqh r8, r17, r13
- bis r12, r13, r13
- subq r10, 8, r10
- stq r13, 0(r16)
- lda r16, 8(r16)
- bne r10, unaligned_loop
-unaligned_partial_left:
- mov r8, r9
-unaligned_second_partial_left:
- ldq_u r8, -1(r25)
- extql r9, r17, r9
- extqh r8, r17, r8
- bis r8, r9, r8
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
-unaligned_few_left:
- ldq_u r9, -1(r25)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r8
- insqh r8, r16, r9
- insql r8, r16, r8
- lda r12, -1(r31)
- mskql r12, r18, r13
- cmovne r13, r13, r12
- insqh r12, r16, r13
- insql r12, r16, r12
- addq r16, r18, r10
- ldq_u r14, 0(r16)
- ldq_u r25, -1(r10)
- bic r14, r12, r14
- bic r25, r13, r25
- and r8, r12, r8
- and r9, r13, r9
- bis r8, r14, r8
- bis r9, r25, r9
- stq_u r9, -1(r10)
- stq_u r8, 0(r16)
-finished:
- hw_rei
diff --git a/system/alpha/palcode/osfpal_cache_copy.S b/system/alpha/palcode/osfpal_cache_copy.S
new file mode 100644
index 000000000..110e05121
--- /dev/null
+++ b/system/alpha/palcode/osfpal_cache_copy.S
@@ -0,0 +1,5257 @@
+// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
+// since we don't have a mechanism to expand the data structures.... pb Nov/95
+
+// build_fixed_image: not sure what means
+// real_mm to be replaced during rewrite
+// remove_save_state remove_restore_state can be remooved to save space ??
+
+
+#include "ev5_defs.h"
+#include "ev5_impure.h"
+#include "ev5_alpha_defs.h"
+#include "ev5_paldef.h"
+#include "ev5_osfalpha_defs.h"
+#include "fromHudsonMacros.h"
+#include "fromHudsonOsf.h"
+#include "dc21164FromGasSources.h"
+
+#ifdef SIMOS
+#define DEBUGSTORE(c) nop
+#else
+#define DEBUGSTORE(c) \
+ lda r13, c(zero) ; \
+ bsr r25, debugstore
+#endif
+
+#define DEBUG_EXC_ADDR()\
+ bsr r25, put_exc_addr; \
+ DEBUGSTORE(13) ; \
+ DEBUGSTORE(10)
+
+#define egore 0
+#define acore 0
+#define beh_model 0
+#define ev5_p2 1
+#define ev5_p1 0
+#define ldvpte_bug_fix 1
+#define osf_chm_fix 0
+
+// Do we want to do this?? pb
+#define spe_fix 0
+// Do we want to do this?? pb
+#define build_fixed_image 0
+
+#define ev5_pass2
+#define enable_p4_fixups 0
+#define osf_svmin 1
+#define enable_physical_console 0
+#define fill_err_hack 0
+#define icflush_on_tbix 0
+#define max_cpuid 1
+#define perfmon_debug 0
+#define rawhide_system 0
+#define rax_mode 0
+
+
+// This is the fix for the user-mode super page references causing the machine to crash.
+#if (spe_fix == 1) && (build_fixed_image==1)
+#define hw_rei_spe br r31, hw_rei_update_spe
+#else
+#define hw_rei_spe hw_rei
+#endif
+
+
+// redefine a few of the distribution-code names to match the Hudson gas names.
+// opcodes
+#define ldqp ldq_p
+#define stqp stq_p
+#define ldlp ldl_p
+#define stlp stl_p
+
+#define r0 $0
+#define r1 $1
+#define r2 $2
+#define r3 $3
+#define r4 $4
+#define r5 $5
+#define r6 $6
+#define r7 $7
+#define r8 $8
+#define r9 $9
+#define r10 $10
+#define r11 $11
+#define r12 $12
+#define r13 $13
+#define r14 $14
+#define r15 $15
+#define r16 $16
+#define r17 $17
+#define r18 $18
+#define r19 $19
+#define r20 $20
+#define r21 $21
+#define r22 $22
+#define r23 $23
+#define r24 $24
+#define r25 $25
+#define r26 $26
+#define r27 $27
+#define r28 $28
+#define r29 $29
+#define r30 $30
+#define r31 $31
+
+// .title "EV5 OSF PAL"
+// .ident "V1.18"
+//
+//****************************************************************************
+//* *
+//* Copyright (c) 1992, 1993, 1994, 1995 *
+//* by DIGITAL Equipment Corporation, Maynard, Mass. *
+//* *
+//* This software is furnished under a license and may be used and copied *
+//* only in accordance with the terms of such license and with the *
+//* inclusion of the above copyright notice. This software or any other *
+//* copies thereof may not be provided or otherwise made available to any *
+//* other person. No title to and ownership of the software is hereby *
+//* transferred. *
+//* *
+//* The information in this software is subject to change without notice *
+//* and should not be construed as a commitment by DIGITAL Equipment *
+//* Corporation. *
+//* *
+//* DIGITAL assumes no responsibility for the use or reliability of its *
+//* software on equipment which is not supplied by DIGITAL. *
+//* *
+//****************************************************************************
+
+// .sbttl "Edit History"
+//+
+// Who Rev When What
+// ------------ --- ----------- --------------------------------
+// DB 0.0 03-Nov-1992 Start
+// DB 0.1 28-Dec-1992 add swpctx
+// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
+// DB 0.3 11-Jan-1993 rearrange trap entry points
+// DB 0.4 01-Feb-1993 add tbi
+// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
+// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
+// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
+// Bug: typo on register number for store in wrunique
+// Bug: rti to kern uses r16 as scratch
+// Bug: callsys saving wrong value in pt_usp
+// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
+// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
+// Bug: rti stl_c could corrupt the stack
+// Bug: unaligned returning wrong value in r17 (or should be and)
+// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
+// DB 0.11 23-Feb-1993 Turn caches on in reset flow
+// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
+// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
+// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
+// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
+// DB 0.16 12-May-1993 Update reset
+// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
+// Bug: in wrmces, not clearing DPC, DSC
+// Update swppal
+// Add pal bugchecks, pal_save_state, pal_restore_state
+// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
+// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
+// DB 0.18 26-May-1993 PVC fixes
+// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
+// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
+// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
+// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
+// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
+// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
+// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
+// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
+// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
+// JM 0.22 28-jul-1993 Add WRIPIR instruction
+// JM 0.23 05-aug-1993 Bump version number for release
+// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
+// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
+// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
+// and SWPCTX
+// JM 0.26 07-oct-1993 Re-implement pal_version
+// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
+// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
+// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
+// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
+// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
+// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
+// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
+// JM 0.33 24-nov-1993 save/restore_state -
+// BUG: use ivptbr to restore mvptbr
+// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
+// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
+// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
+// BUG: generate ksnv halt when tb miss on kernel stack accesses
+// save exc_addr in r14 for invalid_dpte stack builder
+// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
+// the same shadow
+// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
+// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
+// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
+// Hide impure area manipulations in macros
+// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
+// Add some pvc_violate statements
+// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
+// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
+// Add code to ensure fen bit set in icsr before ldt
+// conditionally compile rax_more_reset out.
+// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
+// move rax reset stuff to ev5_osf_system_pal.m64
+// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
+// and performance monitoring bits
+// Change to save_state routine to save more iprs.
+// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
+// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
+// remove_save_state,remove_restore_state;fix new pvc violation in save_state
+// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
+// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
+// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
+// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
+// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
+// Add exc_sum and exc_mask to pal_save_state (not restore)
+// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
+// area.
+// Add performance counter support to swpctx and wrperfmon
+// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
+// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
+// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
+// taken in the interrupt flow, stack is pushed twice.
+// SWPPAL - update to support ECO 59 to allow 0 as a valid address
+// Add itb flush to save/restore state routines
+// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
+// conforms to itbia restriction.
+// Added enable_physical_console flag (for enter/exit console routines only)
+// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
+// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
+// nmiss_fetch_err to nmiss_fetch_ldr31_err.
+// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
+// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
+// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
+// Moved perfmon code here from system file.
+// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
+// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
+// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
+// after ISR read, but we won't catch the ISR update. reverse order
+// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
+// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
+// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
+// DTBMISS_SINGLE if not in palmode.
+// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
+// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
+// superpage mode in User mode and re-enable in kernel mode.
+// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
+// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
+// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
+// cpu bug.
+// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
+// ES 1.13 17-mar-1995 Refine osf_chm_fix
+// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
+// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
+// Force pvc checking of exit_console
+// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
+// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
+// instead of xor to maintain previous mode in pt_misc
+// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
+// not have pme set. The bits in icsr maintain the master enable state.
+// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
+//
+#define vmaj 1
+#define vmin 18
+#define vms_pal 1
+#define osf_pal 2
+#define pal_type osf_pal
+#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
+//-
+
+// .sbttl "PALtemp register usage"
+
+//+
+// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
+// for these PALtemps:
+//
+// pt0 local scratch
+// pt1 local scratch
+// pt2 entUna pt_entUna
+// pt3 CPU specific impure area pointer pt_impure
+// pt4 memory management temp
+// pt5 memory management temp
+// pt6 memory management temp
+// pt7 entIF pt_entIF
+// pt8 intmask pt_intmask
+// pt9 entSys pt_entSys
+// pt10
+// pt11 entInt pt_entInt
+// pt12 entArith pt_entArith
+// pt13 reserved for system specific PAL
+// pt14 reserved for system specific PAL
+// pt15 reserved for system specific PAL
+// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
+// pt17 sysval pt_sysval
+// pt18 usp pt_usp
+// pt19 ksp pt_ksp
+// pt20 PTBR pt_ptbr
+// pt21 entMM pt_entMM
+// pt22 kgp pt_kgp
+// pt23 PCBB pt_pcbb
+//
+//-
+
+// .sbttl "PALshadow register usage"
+//
+//+
+//
+// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
+// This maps the OSF PAL usage of R8 - R14 and R25:
+//
+// r8 ITBmiss/DTBmiss scratch
+// r9 ITBmiss/DTBmiss scratch
+// r10 ITBmiss/DTBmiss scratch
+// r11 PS
+// r12 local scratch
+// r13 local scratch
+// r14 local scratch
+// r25 local scratch
+//
+//
+//-
+
+// .sbttl "ALPHA symbol definitions"
+// _OSF_PSDEF GLOBAL
+// _OSF_PTEDEF GLOBAL
+// _OSF_VADEF GLOBAL
+// _OSF_PCBDEF GLOBAL
+// _OSF_SFDEF GLOBAL
+// _OSF_MMCSR_DEF GLOBAL
+// _SCBDEF GLOBAL
+// _FRMDEF GLOBAL
+// _EXSDEF GLOBAL
+// _OSF_A0_DEF GLOBAL
+// _MCESDEF GLOBAL
+
+// .sbttl "EV5 symbol definitions"
+
+// _EV5DEF
+// _PALTEMP
+// _MM_STAT_DEF
+// _EV5_MM
+// _EV5_IPLDEF
+
+// _HALT_CODES GLOBAL
+// _MCHK_CODES GLOBAL
+
+// _PAL_IMPURE
+// _PAL_LOGOUT
+
+
+
+
+// .sbttl "PALcode configuration options"
+
+// There are a number of options that may be assembled into this version of
+// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
+// the following). The options that can be adjusted cause the resultant PALcode
+// to reflect the desired target system.
+
+
+#define osfpal 1 // This is the PALcode for OSF.
+
+#ifndef rawhide_system
+
+#define rawhide_system 0
+#endif
+
+
+#ifndef real_mm
+// Page table translation vs 1-1 mapping
+#define real_mm 1
+#endif
+
+
+#ifndef rax_mode
+
+#define rax_mode 0
+#endif
+
+#ifndef egore
+// End of reset flow starts a program at 200000(hex).
+#define egore 1
+#endif
+
+#ifndef acore
+// End of reset flow starts a program at 40000(hex).
+#define acore 0
+#endif
+
+
+// assume acore+egore+rax_mode lt 2 // Assertion checker
+
+#ifndef beh_model
+// EV5 behavioral model specific code
+#define beh_model 1
+#endif
+
+#ifndef init_cbox
+// Reset flow init of Bcache and Scache
+#define init_cbox 1
+#endif
+
+#ifndef disable_crd
+// Decides whether the reset flow will disable
+#define disable_crd 0
+#endif
+
+ // correctable read interrupts via ICSR
+#ifndef perfmon_debug
+#define perfmon_debug 0
+#endif
+
+#ifndef icflush_on_tbix
+#define icflush_on_tbix 0
+#endif
+
+#ifndef remove_restore_state
+#define remove_restore_state 0
+#endif
+
+#ifndef remove_save_state
+#define remove_save_state 0
+#endif
+
+#ifndef enable_physical_console
+#define enable_physical_console 0
+#endif
+
+#ifndef ev5_p1
+#define ev5_p1 0
+#endif
+
+#ifndef ev5_p2
+#define ev5_p2 1
+#endif
+
+// assume ev5_p1+ev5_p2 eq 1
+
+#ifndef ldvpte_bug_fix
+#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
+#endif
+
+#ifndef spe_fix
+// If set, disable super-page mode in user mode and re-enable
+#define spe_fix 0
+#endif
+ // in kernel. Workaround for cpu bug.
+#ifndef build_fixed_image
+#define build_fixed_image 0
+#endif
+
+
+#ifndef fill_err_hack
+// If set, disable fill_error mode in user mode and re-enable
+#define fill_err_hack 0
+#endif
+
+ // in kernel. Workaround for cpu bug.
+
+// .macro hw_rei_spe
+// .iif eq spe_fix, hw_rei
+//#if spe_fix != 0
+//
+//
+//#define hw_rei_chm_count hw_rei_chm_count + 1
+// p4_fixup_label \hw_rei_chm_count
+// .iif eq build_fixed_image, br r31, hw_rei_update_spe
+// .iif ne build_fixed_image, hw_rei
+//#endif
+//
+// .endm
+
+// Add flag "osf_chm_fix" to enable dcache in user mode only
+// to avoid cpu bug.
+
+#ifndef osf_chm_fix
+// If set, enable D-Cache in
+#define osf_chm_fix 0
+#endif
+
+#if osf_chm_fix != 0
+// user mode only.
+#define hw_rei_chm_count 0
+#endif
+
+#if osf_chm_fix != 0
+
+#define hw_rei_stall_chm_count 0
+#endif
+
+#ifndef enable_p4_fixups
+
+#define enable_p4_fixups 0
+#endif
+
+ // If set, do EV5 Pass 4 fixups
+#if spe_fix == 0
+
+#define osf_chm_fix 0
+#endif
+
+#if spe_fix == 0
+
+#define enable_p4_fixups 0
+#endif
+
+ // Only allow fixups if fix enabled
+
+ //Turn off fill_errors and MEM_NEM in user mode
+// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
+// //save r22,r23,r24
+// stqp r22, 0x150(r31) //add
+// stqp r23, 0x158(r31) //contents
+// stqp r24, 0x160(r31) //bit mask
+//
+// lda r22, 0x82(r31)
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
+// bis r23,r31,r23
+//
+// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
+// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L20_ // ELSE
+//L10_: bis r23, r24, r23 // clear fillerr_en bit
+//L20_: // ENDIF
+//
+// stlp r23, 0x80(r22) // write back the CIA_MASK register
+// mb
+// ldlp r23, 0x80(r22)
+// bis r23,r31,r23
+// mb
+//
+// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
+// bis r23,r31,r23
+//
+//
+// lda r24, 0x400(r31) // r9 <- fillerr_en bit
+// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L40_ // ELSE
+//L30_: bis r23, r24, r23 // clear fillerr_en bit
+//L40_: // ENDIF
+//
+// stlp r23, 0(r22) // write back the CIA_CTRL register
+// mb
+// ldlp r23, 0(r22)
+// bis r23,r31,r23
+// mb
+//
+// //restore r22,r23,r24
+// ldqp r22, 0x150(r31)
+// ldqp r23, 0x158(r31)
+// ldqp r24, 0x160(r31)
+//
+// .endm
+
+// multiprocessor support can be enabled for a max of n processors by
+// setting the following to the number of processors on the system.
+// Note that this is really the max cpuid.
+
+#ifndef max_cpuid
+#define max_cpuid 8
+#endif
+
+#ifndef osf_svmin // platform specific palcode version number
+#define osf_svmin 0
+#endif
+
+
+#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
+
+// .mcall ldqp // override macro64 definition with macro from library
+// .mcall stqp // override macro64 definition with macro from library
+
+
+// .psect _pal,mix
+// huh pb pal_base:
+// huh pb #define current_block_base . - pal_base
+
+// .sbttl "RESET - Reset Trap Entry Point"
+//+
+// RESET - offset 0000
+// Entry:
+// Vectored into via hardware trap on reset, or branched to
+// on swppal.
+//
+// r0 = whami
+// r1 = pal_base
+// r2 = base of scratch area
+// r3 = halt code
+//
+//
+// Function:
+//
+//-
+
+ .text 0
+ . = 0x0000
+ .globl Pal_Base
+Pal_Base:
+ HDW_VECTOR(PAL_RESET_ENTRY)
+Trap_Reset:
+ nop
+#ifdef SIMOS
+ /*
+ * store into r1
+ */
+ br r1,sys_reset
+#else
+ /* following is a srcmax change */
+
+ DEBUGSTORE(0x41)
+ /* The original code jumped using r1 as a linkage register to pass the base
+ of PALcode to the platform specific code. We use r1 to pass a parameter
+ from the SROM, so we hardcode the address of Pal_Base in platform.s
+ */
+ br r31, sys_reset
+#endif
+
+ // Specify PAL version info as a constant
+ // at a known location (reset + 8).
+
+ .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
+ .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
+ .long 0
+ .long 0
+pal_impure_start:
+ .quad 0
+pal_debug_ptr:
+ .quad 0 // reserved for debug pointer ; 20
+#if beh_model == 0
+
+
+#if enable_p4_fixups != 0
+
+
+ .quad 0
+ .long p4_fixup_hw_rei_fixup_table
+#endif
+
+#else
+
+ .quad 0 //
+ .quad 0 //0x0030
+ .quad 0
+ .quad 0 //0x0040
+ .quad 0
+ .quad 0 //0x0050
+ .quad 0
+ .quad 0 //0x0060
+ .quad 0
+pal_enter_cns_address:
+ .quad 0 //0x0070 -- address to jump to from enter_console
+ .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
+#endif
+
+
+
+
+// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
+
+//+
+// IACCVIO - offset 0080
+// Entry:
+// Vectored into via hardware trap on Istream access violation or sign check error on PC.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV)
+// a2 <- -1 (for ifetch fault)
+// vector via entMM
+//-
+
+ HDW_VECTOR(PAL_IACCVIO_ENTRY)
+Trap_Iaccvio:
+ DEBUGSTORE(0x42)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_IACCVIO_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bic r14, 3, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entmm // get entry point
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r16, osfsf_pc(sp) // save pc
+ stq r29, osfsf_gp(sp) // save gp
+
+ mtpr r13, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ subq r31, 1, r18 // pass flag of istream, as a2
+ hw_rei_spe
+
+
+// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
+
+//+
+// INTERRUPT - offset 0100
+// Entry:
+// Vectored into via trap on hardware interrupt
+//
+// Function:
+// check for halt interrupt
+// check for passive release (current ipl geq requestor)
+// if necessary, switch to kernel mode
+// push stack frame, update ps (including current mode and ipl copies), sp, and gp
+// pass the interrupt info to the system module
+//
+//-
+
+
+ HDW_VECTOR(PAL_INTERRUPT_ENTRY)
+Trap_Interrupt:
+ mfpr r13, ev5__intid // Fetch level of interruptor
+ mfpr r25, ev5__isr // Fetch interrupt summary register
+
+ srl r25, isr_v_hlt, r9 // Get HLT bit
+ mfpr r14, ev5__ipl
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
+ blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
+
+ cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
+ bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
+
+ and r11, osfps_m_mode, r10 // get mode bit
+ beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
+
+ mtpr r30, pt_usp // save user stack
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_INTERRUPT_10_:
+ lda sp, (0-osfsf_c_size)(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r11, osfsf_ps(sp) // save ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // push gp
+ stq r16, osfsf_a0(sp) // a0
+
+// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r18, osfsf_a2(sp) // a2
+ subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
+
+ srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
+ subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
+
+ cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
+ bis r12, r31, r11 // set new ps
+
+ mfpr r12, pt_intmask
+ and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
+
+#ifdef SIMOS
+ /*
+ * Lance had space problems. We don't.
+ */
+ extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+ mfpr r29, pt_kgp // update gp
+ mtpr r14, ev5__ipl // load the new IPL into Ibox
+#else
+// Moved the following three lines to sys_interrupt to make room for debug
+// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+// mfpr r29, pt_kgp // update gp
+
+// mtpr r14, ev5__ipl // load the new IPL into Ibox
+#endif
+ br r31, sys_interrupt // Go handle interrupt
+
+
+
+// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
+
+//+
+// ITBMISS - offset 0180
+// Entry:
+// Vectored into via hardware trap on Istream translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//
+//-
+
+ HDW_VECTOR(PAL_ITB_MISS_ENTRY)
+Trap_Itbmiss:
+#if real_mm == 0
+
+
+ // Simple 1-1 va->pa mapping
+
+ nop // Pad to align to E1
+ mfpr r8, exc_addr
+
+ srl r8, page_offset_size_bits, r9
+ sll r9, 32, r9
+
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+ mtpr r9, itb_pte // E1
+
+ hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
+#else
+
+ // Real MM mapping
+ nop
+ mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
+
+ nop
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
+
+pal_itb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ mtpr r10, exc_addr // Restore exc_address if there was a trap.
+
+ mfpr r31, ev5__va // Unlock VA in case there was a double miss
+ nop
+
+ and r8, osfpte_m_foe, r25 // Look for FOE set.
+ blbc r8, invalid_ipte_handler // PTE not valid.
+
+ nop
+ bne r25, foe_ipte_handler // FOE is set
+
+ nop
+ mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
+
+ hw_rei_stall //
+
+#endif
+
+
+
+
+// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_SINGLE - offset 0200
+// Entry:
+// Vectored into via hardware trap on Dstream single translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//-
+
+ HDW_VECTOR(PAL_DTB_MISS_ENTRY)
+Trap_Dtbmiss_Single:
+#if real_mm == 0
+ // Simple 1-1 va->pa mapping
+ mfpr r8, va // E0
+ srl r8, page_offset_size_bits, r9
+
+ sll r9, 32, r9
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+
+ mtpr r9, dtb_pte // E0
+ nop // Pad to align to E0
+
+
+
+ mtpr r8, dtb_tag // E0
+ nop
+
+ nop // Pad tag write
+ nop
+
+ nop // Pad tag write
+ nop
+
+ hw_rei
+#else
+ mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
+
+// DEBUGSTORE(0x45)
+// DEBUG_EXC_ADDR()
+ // Real MM mapping
+ mfpr r9, ev5__mm_stat // Get read/write bit. E0.
+ mtpr r10, pt6 // Stash exc_addr away
+
+pal_dtb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ nop // Pad MF VA
+
+ mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
+ nop
+
+ mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
+ blbc r8, invalid_dpte_handler // Handle invalid PTE
+
+ mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
+ mfpr r10, pt6
+
+ // Following 2 instructions take 2 cycles
+ mtpr r10, exc_addr // Return linkage in case we trapped. E1.
+ mfpr r31, pt0 // Pad the write to dtb_tag
+
+ hw_rei // Done, return
+#endif
+
+
+
+
+// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_DOUBLE - offset 0280
+// Entry:
+// Vectored into via hardware trap on Double TBmiss from single miss flows.
+//
+// r8 - faulting VA
+// r9 - original MMstat
+// r10 - original exc_addr (both itb,dtb miss)
+// pt6 - original exc_addr (dtb miss flow only)
+// VA IPR - locked with original faulting VA
+//
+// Function:
+// Get PTE, if valid load TB and return.
+// If not valid then take TNV/ACV exception.
+//
+// pt4 and pt5 are reserved for this flow.
+//
+//
+//-
+
+ HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
+Trap_Dtbmiss_double:
+#if ldvpte_bug_fix != 0
+ mtpr r8, pt4 // save r8 to do exc_addr check
+ mfpr r8, exc_addr
+ blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
+ mfpr r8, pt4 // restore r8
+#endif
+ nop
+ mtpr r22, pt5 // Get some scratch space. E1.
+ // Due to virtual scheme, we can skip the first lookup and go
+ // right to fetch of level 2 PTE
+ sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ mtpr r21, pt4 // Get some scratch space. E1.
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ mfpr r21, pt_ptbr // Get physical address of the page table.
+
+ nop
+ addq r21, r22, r21 // Index into page table for level 2 PTE.
+
+ sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ blbc r21, double_pte_inv // Check for Invalid PTE.
+
+ srl r21, 32, r21 // extract PFN from PTE
+ sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
+
+ addq r21, r22, r21 // Index into page table for level 3 PTE.
+ nop
+
+ ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
+ blbc r21, double_pte_inv // Check for invalid PTE.
+
+ mtpr r21, ev5__dtb_pte // Write the PTE. E0.
+ mfpr r22, pt5 // Restore scratch register
+
+ mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
+ mfpr r21, pt4 // Restore scratch register
+
+ nop // Pad write to tag.
+ nop
+
+ nop // Pad write to tag.
+ nop
+
+ hw_rei
+
+
+
+// .sbttl "UNALIGN -- Dstream unalign trap"
+//+
+// UNALIGN - offset 0300
+// Entry:
+// Vectored into via hardware trap on unaligned Dstream reference.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- Opcode
+// a2 <- src/dst register number
+// vector via entUna
+//-
+
+ HDW_VECTOR(PAL_UNALIGN_ENTRY)
+Trap_Unalign:
+/* DEBUGSTORE(0x47)*/
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
+ mfpr r14, exc_addr // get pc
+
+ srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
+ blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
+
+ blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
+ // not set, must be a load
+ and r13, 0x1F, r8 // isolate ra
+
+ cmpeq r8, 0x1F, r8 // check for r31/F31
+ bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
+
+UNALIGN_NO_DISMISS:
+ bis r11, r31, r12 // Save PS
+ bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+UNALIGN_NO_DISMISS_10_:
+ mfpr r25, ev5__va // Unlock VA
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ mtpr r25, pt0 // Stash VA
+ stq r18, osfsf_a2(sp) // a2
+
+ stq r11, osfsf_ps(sp) // save old ps
+ srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
+
+ stq r29, osfsf_gp(sp) // save gp
+ addq r14, 4, r14 // inc PC past the ld/st
+
+ stq r17, osfsf_a1(sp) // a1
+ and r25, mm_stat_m_opcode, r17// Clean opocde for a1
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r16, pt0 // a0 <- va/unlock
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entuna // get entry point
+
+
+ bis r12, r31, r11 // update ps
+ br r31, unalign_trap_cont
+
+
+
+
+// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
+
+//+
+// DFAULT - offset 0380
+// Entry:
+// Vectored into via hardware trap on dstream fault or sign check error on DVA.
+//
+// Function:
+// Ignore faults on FETCH/FETCH_M
+// Check for DFAULT in PAL
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
+// a2 <- R/W
+// vector via entMM
+//
+//-
+ HDW_VECTOR(PAL_D_FAULT_ENTRY)
+Trap_Dfault:
+// DEBUGSTORE(0x48)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r13, ev5__mm_stat // Get mmstat
+ mfpr r8, exc_addr // get pc, preserve r14
+
+ srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
+ blbs r8, dfault_in_pal
+
+ bis r8, r31, r14 // move exc_addr to correct place
+ bis r11, r31, r12 // Save PS
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ and r9, mm_stat_m_opcode, r9 // Clean all but opcode
+
+ cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+ //dismiss exception if load to r31/f31
+ blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
+
+ and r9, 0x1F, r9 // isolate rnum
+ nop
+
+ cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+dfault_no_dismiss:
+ and r13, 0xf, r13 // Clean extra bits in mm_stat
+ bge r25, dfault_trap_cont // no stack swap needed if cm=kern
+
+
+ mtpr r30, pt_usp // save user stack
+ bis r31, r31, r12 // Set new PS
+
+ mfpr r30, pt_ksp
+ br r31, dfault_trap_cont
+
+
+
+
+
+// .sbttl "MCHK - Machine Check Trap Entry Point"
+
+//+
+// MCHK - offset 0400
+// Entry:
+// Vectored into via hardware trap on machine check.
+//
+// Function:
+//
+//-
+
+ HDW_VECTOR(PAL_MCHK_ENTRY)
+Trap_Mchk:
+ DEBUGSTORE(0x49)
+ mtpr r31, ic_flush_ctl // Flush the Icache
+ br r31, sys_machine_check
+
+
+
+
+// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
+
+//+
+// OPCDEC - offset 0480
+// Entry:
+// Vectored into via hardware trap on illegal opcode.
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_OPCDEC_ENTRY)
+Trap_Opcdec:
+ DEBUGSTORE(0x4a)
+//simos DEBUG_EXC_ADDR()
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_OPCDEC_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ addq r14, 4, r14 // inc pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r11, osfsf_ps(sp) // save old ps
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r29, osfsf_gp(sp) // save gp
+ stq r14, osfsf_pc(sp) // save pc
+
+ bis r12, r31, r11 // update ps
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei, E1
+
+ mfpr r29, pt_kgp // get the kgp, E1
+
+ hw_rei_spe // done, E1
+
+
+
+
+
+
+// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
+
+//+
+// ARITH - offset 0500
+// Entry:
+// Vectored into via hardware trap on arithmetic excpetion.
+//
+// Function:
+// Build stack frame
+// a0 <- exc_sum
+// a1 <- exc_mask
+// a2 <- unpred
+// vector via entArith
+//
+//-
+ HDW_VECTOR(PAL_ARITH_ENTRY)
+Trap_Arith:
+ DEBUGSTORE(0x4b)
+ and r11, osfps_m_mode, r12 // get mode bit
+ mfpr r31, ev5__va // unlock mbox
+
+ bis r11, r31, r25 // save ps
+ mfpr r14, exc_addr // get pc
+
+ nop
+ blbs r14, pal_pal_bug_check // arith trap from PAL
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ beq r12, TRAP_ARITH_10_ // if zero we are in kern now
+
+ bis r31, r31, r25 // set the new ps
+ mtpr r30, pt_usp // save user stack
+
+ nop
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ nop // Pad current mode write and stq
+ mfpr r13, ev5__exc_sum // get the exc_sum
+
+ mfpr r12, pt_entarith
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r17, osfsf_a1(sp)
+ mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
+
+ stq r11, osfsf_ps(sp) // save ps
+ bis r25, r31, r11 // set new ps
+
+ stq r16, osfsf_a0(sp) // save regs
+ srl r13, exc_sum_v_swc, r16// shift data to correct position
+
+ stq r18, osfsf_a2(sp)
+// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
+ mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
+
+ stq r29, osfsf_gp(sp)
+ mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
+
+ mfpr r29, pt_kgp // get the kern gp - E1
+ hw_rei_spe // done - E1
+
+
+
+
+
+
+// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
+
+//+
+// FEN - offset 0580
+// Entry:
+// Vectored into via hardware trap on illegal FP op.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_FEN_ENTRY)
+Trap_Fen:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ mfpr r13, ev5__icsr
+ nop
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_FEN_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
+
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r11, osfsf_ps(sp) // save old ps
+
+ stq r29, osfsf_gp(sp) // save gp
+ bis r12, r31, r11 // set new ps
+
+ stq r17, osfsf_a1(sp) // a1
+ blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
+
+ bis r31, osf_a0_fen, r16 // set a0
+ stq r14, osfsf_pc(sp) // save pc
+
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei -E1
+
+ mfpr r29, pt_kgp // get the kgp -E1
+
+ hw_rei_spe // done -E1
+
+// FEN trap was taken, but the fault is really opcdec.
+ ALIGN_BRANCH
+fen_to_opcdec:
+ addq r14, 4, r14 // save PC+4
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r14, osfsf_pc(sp) // save pc
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+ hw_rei_spe // done
+
+
+
+// .sbttl "Misc handlers"
+ // Start area for misc code.
+//+
+//dfault_trap_cont
+// A dfault trap has been taken. The sp has been updated if necessary.
+// Push a stack frame a vector via entMM.
+//
+// Current state:
+// r12 - new PS
+// r13 - MMstat
+// VA - locked
+//
+//-
+ ALIGN_BLOCK
+dfault_trap_cont:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r25, ev5__va // Fetch VA/unlock
+
+ stq r18, osfsf_a2(sp) // a2
+ and r13, 1, r18 // Clean r/w bit for a2
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r25, r31, r16 // a0 <- va
+
+ stq r17, osfsf_a1(sp) // a1
+ srl r13, 1, r17 // shift fault bits to right position
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entmm // get entry point
+
+ stq r29, osfsf_gp(sp) // save gp
+ cmovlbs r17, 1, r17 // a2. acv overrides fox.
+
+ mtpr r25, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ hw_rei_spe // done
+
+//+
+//unalign_trap_cont
+// An unalign trap has been taken. Just need to finish up a few things.
+//
+// Current state:
+// r25 - entUna
+// r13 - shifted MMstat
+//
+//-
+ ALIGN_BLOCK
+unalign_trap_cont:
+ mtpr r25, exc_addr // load exc_addr with entUna
+ // 1 cycle to hw_rei
+
+
+ mfpr r29, pt_kgp // get the kgp
+ and r13, mm_stat_m_ra, r18 // Clean Ra for a2
+
+ hw_rei_spe // done
+
+
+
+//+
+// dfault_in_pal
+// Dfault trap was taken, exc_addr points to a PAL PC.
+// r9 - mmstat<opcode> right justified
+// r8 - exception address
+//
+// These are the cases:
+// opcode was STQ -- from a stack builder, KSP not valid halt
+// r14 - original exc_addr
+// r11 - original PS
+// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
+// KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
+// r10 - original exc_addr
+// r11 - original PS
+//
+//
+//-
+ ALIGN_BLOCK
+dfault_in_pal:
+ DEBUGSTORE(0x50)
+ bic r8, 3, r8 // Clean PC
+ mfpr r9, pal_base
+
+ mfpr r31, va // unlock VA
+#if real_mm != 0
+ // if not real_mm, should never get here from miss flows
+
+ subq r9, r8, r8 // pal_base - offset
+
+ lda r9, pal_itb_ldq-pal_base(r8)
+ nop
+
+ beq r9, dfault_do_bugcheck
+ lda r9, pal_dtb_ldq-pal_base(r8)
+
+ beq r9, dfault_do_bugcheck
+#endif
+
+//
+// KSP invalid halt case --
+ksp_inval_halt:
+ DEBUGSTORE(76)
+ bic r11, osfps_m_mode, r11 // set ps to kernel mode
+ mtpr r0, pt0
+
+ mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
+ mtpr r31, ips
+
+ mtpr r14, exc_addr // Set PC to instruction that caused trouble
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+
+ lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
+ br r31, sys_enter_console // enter the console
+
+ ALIGN_BRANCH
+dfault_do_bugcheck:
+ bis r10, r31, r14 // bugcheck expects exc_addr in r14
+ br r31, pal_pal_bug_check
+
+
+ ALIGN_BLOCK
+//+
+// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
+// On entry -
+// r14 - exc_addr
+// VA is locked
+//
+//-
+dfault_fetch_ldr31_err:
+ mtpr r11, ev5__dtb_cm
+ mtpr r11, ev5__ps // Make sure ps hasn't changed
+
+ mfpr r31, va // unlock the mbox
+ addq r14, 4, r14 // inc the pc to skip the fetch
+
+ mtpr r14, exc_addr // give ibox new PC
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei
+
+
+
+ ALIGN_BLOCK
+//+
+// sys_from_kern
+// callsys from kernel mode - OS bugcheck machine check
+//
+//-
+sys_from_kern:
+ mfpr r14, exc_addr // PC points to call_pal
+ subq r14, 4, r14
+
+ lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
+ br r31, pal_pal_mchk
+
+
+// .sbttl "Continuation of long call_pal flows"
+ ALIGN_BLOCK
+//+
+// wrent_tbl
+// Table to write *int in paltemps.
+// 4 instructions/entry
+// r16 has new value
+//
+//-
+wrent_tbl:
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entint
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entarith
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entmm
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entif
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entuna
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entsys
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// tbi_tbl
+// Table to do tbi instructions
+// 4 instructions per entry
+//-
+tbi_tbl:
+ // -2 tbia
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_ia // Flush DTB
+ mtpr r31, ev5__itb_ia // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+ // -1 tbiap
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_iap // Flush DTB
+ mtpr r31, ev5__itb_iap // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+
+ // 0 unused
+//orig pvc_jsr tbi, dest=1
+ hw_rei // Pad table
+ nop
+ nop
+ nop
+
+
+ // 1 tbisi
+//orig pvc_jsr tbi, dest=1
+#if icflush_on_tbix != 0
+
+
+
+ nop
+ br r31, pal_ic_flush_and_tbisi // Flush Icache
+ nop
+ nop // Pad table
+#else
+
+ nop
+ nop
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ // 2 tbisd
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB.
+ nop
+
+ nop
+ hw_rei_stall
+
+
+ // 3 tbis
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
+#else
+ br r31, tbi_finish
+ ALIGN_BRANCH
+tbi_finish:
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ ALIGN_BLOCK
+//+
+// bpt_bchk_common:
+// Finish up the bpt/bchk instructions
+//-
+bpt_bchk_common:
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_user
+// Finish up the rti instruction
+//-
+rti_to_user:
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mfpr r30, pt_usp
+ hw_rei_spe // and back
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_kern
+// Finish up the rti instruction
+//-
+rti_to_kern:
+ and r12, osfps_m_ipl, r11 // clean ps
+ mfpr r12, pt_intmask // get int mask
+
+ extbl r12, r11, r12 // get mask for this ipl
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mtpr r12, ev5__ipl // set the new ipl.
+ or r25, r31, sp // sp
+
+// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// swpctx_cont
+// Finish up the swpctx instruction
+//-
+
+swpctx_cont:
+#if ev5_p1 != 0
+
+
+ bic r25, r24, r25 // clean icsr<FPE>
+ get_impure r8 // get impure pointer
+
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+ fix_impure_ipr r8 // adjust impure pointer
+
+ restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
+ srl r23, 32, r24 // move asn to low asn pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ sll r24, itb_asn_v_asn, r12
+
+#else
+
+ bic r25, r24, r25 // clean icsr<FPE,PMP>
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ srl r23, 32, r24 // move asn to low asn pos
+
+ and r22, 1, r22
+ sll r24, itb_asn_v_asn, r12
+
+ sll r22, icsr_v_pmp, r22
+ nop
+
+ or r25, r22, r25 // icsr with new pme
+#endif
+
+ sll r24, dtb_asn_v_asn, r24
+
+ subl r23, r13, r13 // gen new cc offset
+ mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
+
+ mtpr r24, dtb_asn // Load up new ASN
+ mtpr r25, icsr // write the icsr
+
+ sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
+ ldqp r25, osfpcb_q_usp(r16) // get new usp
+
+ insll r13, 4, r13 // >> 32
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r14, pt_ptbr // load the new ptbr
+
+ mtpr r13, cc // set new offset
+ ldqp r30, osfpcb_q_ksp(r16) // get new ksp
+
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r25, pt_usp // save usp
+
+#if ev5_p1 != 0
+
+
+ blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
+
+ // otherwise, monitoring select processes - update pm
+ lda r25, 0x3F(r31)
+ cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
+
+ sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
+ mfpr r22, ev5__pmctr
+
+ and r8, r25, r8 // mask new ctl value
+ bic r22, r25, r22 // clear ctl field in pmctr
+
+ or r8, r22, r8
+ mtpr r8, ev5__pmctr
+
+no_pm_change:
+#endif
+
+
+#if osf_chm_fix != 0
+
+
+ p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
+
+#if build_fixed_image != 0
+
+
+ hw_rei_stall
+#else
+
+ mfpr r9, pt_pcbb // get FEN
+#endif
+
+ ldqp r9, osfpcb_q_fen(r9)
+ blbc r9, no_pm_change_10_ // skip if FEN disabled
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31)
+ mtpr r12, dc_mode // turn dcache on so we can flush it
+ nop // force correct slotting
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+
+ lda r8, 0(r31) // flood the dcache with junk data
+no_pm_change_5_: ldqp r31, 0(r8)
+ lda r8, 0x20(r8) // touch each cache block
+ srl r8, 13, r9
+ blbc r9, no_pm_change_5_
+
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn the dcache back off
+ nop // force correct slotting
+ mfpr r31, pt0 // no hw_rei_stall in 0,1
+#endif
+
+
+no_pm_change_10_: hw_rei_stall // back we go
+
+ ALIGN_BLOCK
+//+
+// swppal_cont - finish up the swppal call_pal
+//-
+
+swppal_cont:
+ mfpr r2, pt_misc // get misc bits
+ sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
+ or r2, r0, r2 // set the bit
+ mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
+ mtpr r2, pt_misc // update the chip
+
+ or r3, r31, r4
+ mfpr r3, pt_impure // pass pointer to the impure area in r3
+//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
+//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
+//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
+//orig unfix_impure_ipr r3 // restore impure pointer
+ lda r3, CNS_Q_IPR(r3)
+ RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
+ RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
+ lda r3, -CNS_Q_IPR(r3)
+
+ or r31, r31, r0 // set status to success
+// pvc_violate 1007
+ jmp r31, (r4) // and call our friend, it's her problem now
+
+
+swppal_fail:
+ addq r0, 1, r0 // set unknown pal or not loaded
+ hw_rei // and return
+
+
+// .sbttl "Memory management"
+
+ ALIGN_BLOCK
+//+
+//foe_ipte_handler
+// IFOE detected on level 3 pte, sort out FOE vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV vs FOE. Build stack and dispatch
+// Will not be here if TNV.
+//-
+
+foe_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ lda r17, mmcsr_c_acv(r31) // assume ACV
+
+ stq r16, osfsf_pc(sp) // save pc
+ cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+ ALIGN_BLOCK
+//+
+//invalid_ipte_handler
+// TNV detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch.
+//-
+
+invalid_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ and r25, 1, r17 // Isolate kre
+
+ stq r16, osfsf_pc(sp) // save pc
+ xor r17, 1, r17 // map to acv/tnv as a1
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+
+
+
+ ALIGN_BLOCK
+//+
+//invalid_dpte_handler
+// INVALID detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R10 = va
+// R8 = pte
+// R9 = mm_stat
+// PT6 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch
+//-
+
+
+invalid_dpte_handler:
+ mfpr r12, pt6
+ blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
+
+ bis r12, r31, r14 // save PC in case of tbmiss or fault
+ srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
+
+ mtpr r11, pt0 // Save PS for stack write
+ and r25, mm_stat_m_opcode, r25 // isolate opcode
+
+ cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
+ blbs r25, nmiss_fetch_ldr31_err // yes
+
+ //dismiss exception if load to r31/f31
+ blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
+
+ and r25, 0x1F, r25 // isolate rnum
+ nop
+
+ cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
+ bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
+
+invalid_dpte_no_dismiss:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r25 // Save va in case TBmiss on stack
+ and r9, 1, r13 // save r/w flag
+
+ stq r16, osfsf_a0(sp) // a0
+ or r25, r31, r16 // pass va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // assume acv
+
+ srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
+ stq r29, osfsf_gp(sp)
+
+ stq r18, osfsf_a2(sp) // a2
+ cmovlbs r13, r25, r12 // if write access move acv based on write enable
+
+ or r13, r31, r18 // pass flag of dstream access and read vs write
+ mfpr r25, pt0 // get ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r13, pt_entmm // get entry point
+
+ stq r25, osfsf_ps(sp) // save ps
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
+
+ hw_rei_spe // out to exec
+
+//+
+//
+// We come here if we are erring on a dtb_miss, and the instr is a
+// fetch, fetch_m, of load to r31/f31.
+// The PC is incremented, and we return to the program.
+// essentially ignoring the instruction and error.
+//
+//-
+ ALIGN_BLOCK
+nmiss_fetch_ldr31_err:
+ mfpr r12, pt6
+ addq r12, 4, r12 // bump pc to pc+4
+
+ mtpr r12, exc_addr // and set entry point
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei //
+
+ ALIGN_BLOCK
+//+
+// double_pte_inv
+// We had a single tbmiss which turned into a double tbmiss which found
+// an invalid PTE. Return to single miss with a fake pte, and the invalid
+// single miss flow will report the error.
+//
+// on entry:
+// r21 PTE
+// r22 available
+// VA IPR locked with original fault VA
+// pt4 saved r21
+// pt5 saved r22
+// pt6 original exc_addr
+//
+// on return to tbmiss flow:
+// r8 fake PTE
+//
+//
+//-
+double_pte_inv:
+ srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
+ mfpr r22, exc_addr // get the pc
+
+ lda r22, 4(r22) // inc the pc
+ lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
+
+ cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
+ mtpr r22, exc_addr // set for rei
+
+ mfpr r21, pt4 // restore regs
+ mfpr r22, pt5 // restore regs
+
+ hw_rei // back to tb miss
+
+ ALIGN_BLOCK
+//+
+//tnv_in_pal
+// The only places in pal that ld or store are the
+// stack builders, rti or retsys. Any of these mean we
+// need to take a ksp not valid halt.
+//
+//-
+tnv_in_pal:
+
+
+ br r31, ksp_inval_halt
+
+
+// .sbttl "Icache flush routines"
+
+ ALIGN_BLOCK
+//+
+// Common Icache flush routine.
+//
+//
+//-
+pal_ic_flush:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+ nop
+ nop
+
+one_cycle_and_hw_rei:
+ nop
+ nop
+
+ hw_rei_stall
+
+#if icflush_on_tbix != 0
+
+
+ ALIGN_BLOCK
+
+//+
+// Common Icache flush and ITB invalidate single routine.
+// ITBIS and hw_rei_stall must be in same octaword.
+// r17 - has address to invalidate
+//
+//-
+PAL_IC_FLUSH_AND_TBISI:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+
+ nop
+ nop
+
+ nop
+ nop
+
+ // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
+ // 44 nops plus 4 instructions before it is 48 instructions.
+ // Since this routine started on a 32-byte (8 instruction) boundary,
+ // the following 2 instructions will be in the same octword as required.
+// ALIGN_BRANCH
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+
+#endif
+
+ ALIGN_BLOCK
+//+
+//osfpal_calpal_opcdec
+// Here for all opcdec CALL_PALs
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+osfpal_calpal_opcdec:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ nop
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+osfpal_calpal_opcdec_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ nop
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r14, osfsf_pc(sp) // save pc
+ nop
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+
+
+
+//+
+//pal_update_pcb
+// Update the PCB with the current SP, AST, and CC info
+//
+// r0 - return linkage
+//-
+ ALIGN_BLOCK
+
+pal_update_pcb:
+ mfpr r12, pt_pcbb // get pcbb
+ and r11, osfps_m_mode, r25 // get mode
+ beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
+ mtpr r30, pt_usp // save user stack
+ stqp r30, osfpcb_q_usp(r12) // store usp
+ br r31, pal_update_pcb_20_ // join common
+pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
+pal_update_pcb_20_: rpcc r13 // get cyccounter
+ srl r13, 32, r14 // move offset
+ addl r13, r14, r14 // merge for new time
+ stlp r14, osfpcb_l_cc(r12) // save time
+
+//orig pvc_jsr updpcb, bsr=1, dest=1
+ ret r31, (r0)
+
+
+
+#if remove_save_state == 0
+
+// .sbttl "PAL_SAVE_STATE"
+//+
+//
+// Pal_save_state
+//
+// Function
+// All chip state saved, all PT's, SR's FR's, IPR's
+//
+//
+// Regs' on entry...
+//
+// R0 = halt code
+// pt0 = r0
+// R1 = pointer to impure
+// pt4 = r1
+// R3 = return addr
+// pt5 = r3
+//
+// register usage:
+// r0 = halt_code
+// r1 = addr of impure area
+// r3 = return_address
+// r4 = scratch
+//
+//-
+
+
+ ALIGN_BLOCK
+ .globl pal_save_state
+pal_save_state:
+//
+//
+// start of implementation independent save routine
+//
+// the impure area is larger than the addressibility of hw_ld and hw_st
+// therefore, we need to play some games: The impure area
+// is informally divided into the "machine independent" part and the
+// "machine dependent" part. The state that will be saved in the
+// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
+// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
+// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
+// macros will automagically adjust the offset correctly.
+//
+
+// The distributed code is commented out and followed by corresponding SRC code.
+// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
+
+//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
+//orig store_reg1 hlt, r0, r1, ipr=1
+ SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
+
+ mfpr r0, pt0 // get r0 back //orig
+//orig store_reg1 0, r0, r1 // save r0
+ SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
+
+ mfpr r0, pt4 // get r1 back //orig
+//orig store_reg1 1, r0, r1 // save r1
+ SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
+
+//orig store_reg 2 // save r2
+ SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
+
+ mfpr r0, pt5 // get r3 back //orig
+//orig store_reg1 3, r0, r1 // save r3
+ SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
+
+ // reason code has been saved
+ // r0 has been saved
+ // r1 has been saved
+ // r2 has been saved
+ // r3 has been saved
+ // pt0, pt4, pt5 have been lost
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r2, icsr // Get icsr //orig
+//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r0, (1<<(icsr_v_sde-16))(r31)
+ bic r2, r0, r0 // ICSR with SDE clear //orig
+ mtpr r0, icsr // Turn off SDE //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+
+ // save integer regs R4-r31
+//orig #define t 4
+//orig .repeat 28
+//orig store_reg \t
+//orig #define t t + 1
+//orig .endr
+ SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+ // save all paltemp regs except pt0
+
+//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
+//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
+//orig #define t 1
+//orig .repeat 23
+//orig store_reg \t , pal=1
+//orig #define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore the impure base address.
+ lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
+ SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+ // Restore shadow mode
+ mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
+ mfpr r31, pt0 //orig
+ mtpr r2, icsr // Restore original ICSR //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+ // save all integer shadow regs
+
+//orig #define t 8
+//orig .repeat 7
+//orig store_reg \t, shadow=1
+//orig #define t t + 1
+//orig .endr
+//orig store_reg 25, shadow=1
+
+ SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+
+//orig store_reg exc_addr, ipr=1 // save ipr
+//orig store_reg pal_base, ipr=1 // save ipr
+//orig store_reg mm_stat, ipr=1 // save ipr
+//orig store_reg va, ipr=1 // save ipr
+//orig store_reg icsr, ipr=1 // save ipr
+//orig store_reg ipl, ipr=1 // save ipr
+//orig store_reg ps, ipr=1 // save ipr
+//orig store_reg itb_asn, ipr=1 // save ipr
+//orig store_reg aster, ipr=1 // save ipr
+//orig store_reg astrr, ipr=1 // save ipr
+//orig store_reg sirr, ipr=1 // save ipr
+//orig store_reg isr, ipr=1 // save ipr
+//orig store_reg ivptbr, ipr=1 // save ipr
+//orig store_reg mcsr, ipr=1 // save ipr
+//orig store_reg dc_mode, ipr=1 // save ipr
+
+ SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
+ SAVE_IPR(va,CNS_Q_VA,r1)
+ SAVE_IPR(icsr,CNS_Q_ICSR,r1)
+ SAVE_IPR(ipl,CNS_Q_IPL,r1)
+ SAVE_IPR(ips,CNS_Q_IPS,r1)
+ SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ SAVE_IPR(aster,CNS_Q_ASTER,r1)
+ SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
+ SAVE_IPR(sirr,CNS_Q_SIRR,r1)
+ SAVE_IPR(isr,CNS_Q_ISR,r1)
+ SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
+ SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
+//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
+//orig // PVC violation applies only to
+pvc$osf35$379: // loads. HW_ST ok here, so ignore
+ SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
+
+
+ //the following iprs are informational only -- will not be restored
+
+//orig store_reg icperr_stat, ipr=1
+//orig store_reg pmctr, ipr=1
+//orig store_reg intid, ipr=1
+//orig store_reg exc_sum, ipr=1
+//orig store_reg exc_mask, ipr=1
+//orig ldah r14, 0xfff0(r31)
+//orig zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig nop // pad mf dcperr_stat out of shadow of last store
+//orig nop
+//orig nop
+//orig store_reg dcperr_stat, ipr=1
+
+ SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
+ SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
+ SAVE_IPR(intId,CNS_Q_INT_ID,r1)
+ SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
+ SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
+ ldah r14, 0xFFF0(zero)
+ zap r14, 0xE0, r14 // Get base address of CBOX IPRs
+ NOP // Pad mfpr dcPerr out of shadow of
+ NOP // last store
+ NOP
+ SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
+
+ // read cbox ipr state
+
+//orig mb
+//orig ldqp r2, ev5__sc_ctl(r14)
+//orig ldqp r13, ld_lock(r14)
+//orig ldqp r4, ev5__sc_addr(r14)
+//orig ldqp r5, ev5__ei_addr(r14)
+//orig ldqp r6, ev5__bc_tag_addr(r14)
+//orig ldqp r7, ev5__fill_syn(r14)
+//orig bis r5, r4, r31
+//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
+//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
+//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
+//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
+//orig mb
+
+#ifndef SIMOS
+ mb
+ ldq_p r2, scCtl(r14)
+ ldq_p r13, ldLock(r14)
+ ldq_p r4, scAddr(r14)
+ ldq_p r5, eiAddr(r14)
+ ldq_p r6, bcTagAddr(r14)
+ ldq_p r7, fillSyn(r14)
+ bis r5, r4, zero // Make sure all loads complete before
+ bis r7, r6, zero // reading registers that unlock them.
+ ldq_p r8, scStat(r14) // Unlocks scAddr.
+ ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
+ ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
+ mb
+#endif
+//orig // save cbox ipr state
+//orig store_reg1 sc_ctl, r2, r1, ipr=1
+//orig store_reg1 ld_lock, r13, r1, ipr=1
+//orig store_reg1 sc_addr, r4, r1, ipr=1
+//orig store_reg1 ei_addr, r5, r1, ipr=1
+//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
+//orig store_reg1 fill_syn, r7, r1, ipr=1
+//orig store_reg1 sc_stat, r8, r1, ipr=1
+//orig store_reg1 ei_stat, r9, r1, ipr=1
+//orig //bc_config? sl_rcv?
+
+ SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
+ SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
+ SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
+ SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
+ SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
+ SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
+ SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
+ SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
+
+// restore impure base //orig
+//orig unfix_impure_ipr r1
+ lda r1, -CNS_Q_IPR(r1)
+
+// save all floating regs //orig
+ mfpr r0, icsr // get icsr //orig
+ or r31, 1, r2 // get a one //orig
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
+ sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
+ or r2, r0, r0 // set FEN on //orig
+ mtpr r0, icsr // write to icsr, enabling FEN //orig
+
+// map the save area virtually
+// orig mtpr r31, dtb_ia // clear the dtb
+// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+// orig sll r0, 32, r0 // shift to PFN field
+// orig lda r2, 0xff(r31) // all read enable and write enable bits set
+// orig sll r2, 8, r2 // move to PTE location
+// orig addq r0, r2, r0 // combine with PFN
+// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+// orig mtpr r1, dtb_tag // write TB tag
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too - in case the impure area crosses a page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag
+
+ lda r4, (1<<va_s_off)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+ sll r31, 0, r31 // stall cycle 1 // orig
+ sll r31, 0, r31 // stall cycle 2 // orig
+ sll r31, 0, r31 // stall cycle 3 // orig
+ nop // orig
+
+//orig // add offset for saving fpr regs
+//orig fix_impure_gpr r1
+
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+// now save the regs - F0-F31
+
+//orig #define t 0
+//orig .repeat 32
+//orig store_reg \t , fpu=1
+//orig #define t t + 1
+//orig .endr
+
+ mf_fpcr f0 // original
+
+ SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig //switch impure offset from gpr to ipr---
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig store_reg1 fpcsr, f0, r1, fpcsr=1
+
+ SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
+ lda r1, -0x200(r1) // Restore the impure base address
+
+//orig // and back to gpr ---
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+
+//orig lda r0, cns_mchksize(r31) // get size of mchk area
+//orig store_reg1 mchkflag, r0, r1, ipr=1
+//orig mb
+
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
+ // save this using the IPR base (it is closer) not the GRP base as they used...pb
+ lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
+ SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
+ mb
+
+//orig or r31, 1, r0 // get a one
+//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
+//orig mb
+
+ lda r1, -CNS_Q_IPR(r1) // back to the base
+ lda r1, 0x200(r1) // Point to center of CPU segment
+ or r31, 1, r0 // get a one
+ SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
+ mb
+
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+ lda r1, -0x200(r1) // Point to center of CPU segment
+
+ mtpr r31, dtb_ia // clear the dtb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr savsta, bsr=1, dest=1
+ ret r31, (r3) // and back we go
+#endif
+
+
+#if remove_restore_state == 0
+
+
+// .sbttl "PAL_RESTORE_STATE"
+//+
+//
+// Pal_restore_state
+//
+//
+// register usage:
+// r1 = addr of impure area
+// r3 = return_address
+// all other regs are scratchable, as they are about to
+// be reloaded from ram.
+//
+// Function:
+// All chip state restored, all SRs, FRs, PTs, IPRs
+// *** except R1, R3, PT0, PT4, PT5 ***
+//
+//-
+ ALIGN_BLOCK
+pal_restore_state:
+
+//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
+
+//orig // map the console io area virtually
+//orig mtpr r31, dtb_ia // clear the dtb
+//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r1, dtb_tag // write TB tag
+//orig
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too, in case impure area crosses page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
+
+ lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+//orig // save all floating regs
+//orig mfpr r0, icsr // get icsr
+//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
+//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
+//orig or r2, r0, r0 // set FEN on
+//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
+
+ mfpr r0, icsr // Get current ICSR
+ bis zero, 1, r2 // Get a '1'
+ or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
+ sll r2, icsr_v_fpe, r2 // Shift bits into position
+ bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
+ mtpr r0, icsr // Update the chip
+
+ mfpr r31, pt0 // FPE bubble cycle 1 //orig
+ mfpr r31, pt0 // FPE bubble cycle 2 //orig
+ mfpr r31, pt0 // FPE bubble cycle 3 //orig
+
+//orig fix_impure_ipr r1
+//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
+//orig mt_fpcr f0
+//orig
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
+//orig
+//orig // restore all floating regs
+//orig#define t 0
+//orig .repeat 32
+//orig restore_reg \t , fpu=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, 200(r1) // Point to base of IPR area again
+ RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
+ mt_fpcr f0 // original
+
+ lda r1, 0x200(r1) // point to center of CPU segment
+ RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig
+//orig // restore all pal regs
+//orig#define t 1
+//orig .repeat 23
+//orig restore_reg \t , pal=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore base address of impure area.
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
+ RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+
+//orig restore_reg exc_addr, ipr=1 // restore ipr
+//orig restore_reg pal_base, ipr=1 // restore ipr
+//orig restore_reg ipl, ipr=1 // restore ipr
+//orig restore_reg ps, ipr=1 // restore ipr
+//orig mtpr r0, dtb_cm // set current mode in mbox too
+//orig restore_reg itb_asn, ipr=1
+//orig srl r0, itb_asn_v_asn, r0
+//orig sll r0, dtb_asn_v_asn, r0
+//orig mtpr r0, dtb_asn // set ASN in Mbox too
+//orig restore_reg ivptbr, ipr=1
+//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
+//orig restore_reg mcsr, ipr=1
+//orig restore_reg aster, ipr=1
+//orig restore_reg astrr, ipr=1
+//orig restore_reg sirr, ipr=1
+//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
+//orig mfpr r31, pt0 // (may issue with mt maf_mode)
+//orig mfpr r31, pt0 // bubble cycle 1
+//orig mfpr r31, pt0 // bubble cycle 2
+//orig mfpr r31, pt0 // bubble cycle 3
+//orig mfpr r31, pt0 // (may issue with following ld)
+
+ // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
+ RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ RESTORE_IPR(ipl,CNS_Q_IPL,r1)
+ RESTORE_IPR(ips,CNS_Q_IPS,r1)
+ mtpr r0, dtbCm // Set Mbox current mode too.
+ RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ srl r0, 4, r0
+ sll r0, 57, r0
+ mtpr r0, dtbAsn // Set Mbox ASN too
+ RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ mtpr r0, mVptBr // Set Mbox VptBr too
+ RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
+ RESTORE_IPR(aster,CNS_Q_ASTER,r1)
+ RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
+ RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
+ RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
+ STALL
+ STALL
+ STALL
+ STALL
+ STALL
+
+
+ // restore all integer shadow regs
+//orig#define t 8
+//orig .repeat 7
+//orig restore_reg \t, shadow=1
+//orig#define t t + 1
+//orig .endr
+//orig restore_reg 25, shadow=1
+//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
+
+ RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+ RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
+ mfpr r31, pt0 // "" //orig
+ mfpr r0, icsr // Get icsr //orig
+//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
+ bic r0, r2, r2 // ICSR with SDE clear //orig
+ mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+//orig // switch impure pointer from ipr to gpr area --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig // restore all integer regs
+//orig#define t 4
+//orig .repeat 28
+//orig restore_reg \t
+//orig#define t t + 1
+//orig .endr
+
+// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
+
+ lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+ RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
+
+ lda t0, -0x200(t0) // Restore base address of impure area.
+ lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
+ RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
+
+//orig // and back again --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
+//orig mb
+
+ lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
+ lda t0, 0x200(t0) // and back to center of CPU segment
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
+ mb
+
+//orig // and back we go
+//orig// restore_reg 3
+//orig restore_reg 2
+//orig// restore_reg 1
+//orig restore_reg 0
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+
+ RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
+ RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
+ lda r1, -0x200(r1) // Restore impure base address
+
+ mfpr r31, pt0 // stall for ldqp above //orig
+
+ mtpr r31, dtb_ia // clear the tb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr rststa, bsr=1, dest=1
+ ret r31, (r3) // back we go //orig
+#endif
+
+
+//+
+// pal_pal_bug_check -- code has found a bugcheck situation.
+// Set things up and join common machine check flow.
+//
+// Input:
+// r14 - exc_addr
+//
+// On exit:
+// pt0 - saved r0
+// pt1 - saved r1
+// pt4 - saved r4
+// pt5 - saved r5
+// pt6 - saved r6
+// pt10 - saved exc_addr
+// pt_misc<47:32> - mchk code
+// pt_misc<31:16> - scb vector
+// r14 - base of Cbox IPRs in IO space
+// MCES<mchk> is set
+//-
+
+ ALIGN_BLOCK
+ .globl pal_pal_bug_check_from_int
+pal_pal_bug_check_from_int:
+ DEBUGSTORE(0x79)
+//simos DEBUG_EXC_ADDR()
+ DEBUGSTORE(0x20)
+//simos bsr r25, put_hex
+ lda r25, mchk_c_bugcheck(r31)
+ addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
+ br r31, pal_pal_mchk
+ nop
+
+pal_pal_bug_check:
+ lda r25, mchk_c_bugcheck(r31)
+
+pal_pal_mchk:
+ sll r25, 32, r25 // Move mchk code to position
+
+ mtpr r14, pt10 // Stash exc_addr
+ mtpr r14, exc_addr
+
+ mfpr r12, pt_misc // Get MCES and scratch
+ zap r12, 0x3c, r12
+
+ or r12, r25, r12 // Combine mchk code
+ lda r25, scb_v_procmchk(r31) // Get SCB vector
+
+ sll r25, 16, r25 // Move SCBv to position
+ or r12, r25, r25 // Combine SCBv
+
+ mtpr r0, pt0 // Stash for scratch
+ bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
+
+ mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
+ ldah r14, 0xfff0(r31)
+
+ mtpr r1, pt1 // Stash for scratch
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+
+ mtpr r4, pt4
+ mtpr r5, pt5
+
+ mtpr r6, pt6
+ blbs r12, sys_double_machine_check // MCHK halt if double machine check
+
+ br r31, sys_mchk_collect_iprs // Join common machine check flow
+
+// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
+
+// .sbttl "HALT - PALcode for HALT instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// GO to console code
+//
+//-
+
+ .text 1
+// . = 0x2000
+ CALL_PAL_PRIV(PAL_HALT_ENTRY)
+call_pal_halt:
+#if rax_mode == 0
+ mfpr r31, pt0 // Pad exc_addr read
+ mfpr r31, pt0
+
+ mfpr r12, exc_addr // get PC
+ subq r12, 4, r12 // Point to the HALT
+
+ mtpr r12, exc_addr
+ mtpr r0, pt0
+
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+ lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
+ br r31, sys_enter_console // enter the console
+
+#else // RAX mode
+ mb
+ mb
+ mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
+ mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
+ mtpr r8, exc_addr // no HW_REI for 1 cycle.
+ blbc r9, not_begin_case
+ mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
+ mtpr r31, ev5__itb_ia // clear ITB.
+
+not_begin_case:
+ nop
+ nop
+
+ nop
+ nop // pad mt itb_asn ->hw_rei_stall
+
+ hw_rei_stall
+#endif
+
+// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// R16 - contains the PFN of the page to be flushed
+//
+// Function:
+// Flush all Dstream caches of 1 entire page
+// The CFLUSH routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
+Call_Pal_Cflush:
+ br r31, sys_cflush
+
+// .sbttl "DRAINA - PALcode for DRAINA instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Implicit TRAPB performed by hardware.
+//
+// Function:
+// Stall instruction issue until all prior instructions are guaranteed to
+// complete without incurring aborts. For the EV5 implementation, this
+// means waiting until all pending DREADS are returned.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
+Call_Pal_Draina:
+ ldah r14, 0x100(r31) // Init counter. Value?
+ nop
+
+DRAINA_LOOP:
+ subq r14, 1, r14 // Decrement counter
+ mfpr r13, ev5__maf_mode // Fetch status bit
+
+ srl r13, maf_mode_v_dread_pending, r13
+ ble r14, DRAINA_LOOP_TOO_LONG
+
+ nop
+ blbs r13, DRAINA_LOOP // Wait until all DREADS clear
+
+ hw_rei
+
+DRAINA_LOOP_TOO_LONG:
+ br r31, call_pal_halt
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0003)
+CallPal_OpcDec03:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0004)
+CallPal_OpcDec04:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0005)
+CallPal_OpcDec05:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0006)
+CallPal_OpcDec06:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0007)
+CallPal_OpcDec07:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0008)
+CallPal_OpcDec08:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "CSERVE- PALcode for CSERVE instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Various functions for private use of console software
+//
+// option selector in r0
+// arguments in r16....
+// The CSERVE routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
+Call_Pal_Cserve:
+ br r31, sys_cserve
+
+// .sbttl "swppal - PALcode for swppal instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Vectored into via hardware PALcode instruction dispatch.
+// R16 contains the new PAL identifier
+// R17:R21 contain implementation-specific entry parameters
+//
+// R0 receives status:
+// 0 success (PAL was switched)
+// 1 unknown PAL variant
+// 2 known PAL variant, but PAL not loaded
+//
+//
+// Function:
+// Swap control to another PAL.
+//-
+
+ CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
+Call_Pal_Swppal:
+ cmpule r16, 255, r0 // see if a kibble was passed
+ cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
+
+ or r16, r31, r3 // set r3 incase this is a address
+ blbc r0, swppal_cont // nope, try it as an address
+
+ cmpeq r16, 2, r0 // is it our friend OSF?
+ blbc r0, swppal_fail // nope, don't know this fellow
+
+ br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
+
+// .global osfpal_hw_entry_reset
+// .weak osfpal_hw_entry_reset
+// .long <osfpal_hw_entry_reset-pal_start>
+//orig halt // don't know how to get the address here - kludge ok, load pal at 0
+ .long 0 // ?? hack upon hack...pb
+
+CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
+// ble r3, swppal_fail ; if OSF not linked in say not loaded.
+ mfpr r2, pal_base // fetch pal base
+
+ addq r2, r3, r3 // add pal base
+ lda r2, 0x3FFF(r31) // get pal base checker mask
+
+ and r3, r2, r2 // any funky bits set?
+ cmpeq r2, 0, r0 //
+
+ blbc r0, swppal_fail // return unknown if bad bit set.
+ br r31, swppal_cont
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000B)
+CallPal_OpcDec0B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000C)
+CallPal_OpcDec0C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wripir- PALcode for wripir instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// r16 = processor number to interrupt
+//
+// Function:
+// IPIR <- R16
+// Handled in system-specific code
+//
+// Exit:
+// interprocessor interrupt is recorded on the target processor
+// and is initiated when the proper enabling conditions are present.
+//-
+
+ CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
+Call_Pal_Wrpir:
+ br r31, sys_wripir
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000E)
+CallPal_OpcDec0E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000F)
+CallPal_OpcDec0F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdmces- PALcode for rdmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// R0 <- ZEXT(MCES)
+//-
+
+ CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
+Call_Pal_Rdmces:
+ mfpr r0, pt_mces // Read from PALtemp
+ and r0, mces_m_all, r0 // Clear other bits
+
+ hw_rei
+
+// .sbttl "wrmces- PALcode for wrmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
+// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
+// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
+// MCES<3> <- R16<3> (DPC)
+// MCES<4> <- R16<4> (DSC)
+//
+//-
+
+ CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
+Call_Pal_Wrmces:
+ and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
+ mfpr r14, pt_mces // Get current value
+
+ ornot r31, r13, r13 // Flip all the bits
+ and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
+
+ and r14, r13, r1 // Update MCHK, SCE, PCE
+ bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
+
+ or r1, r17, r1 // Update DPC and DSC
+ mtpr r1, pt_mces // Write MCES back
+
+#if rawhide_system == 0
+ nop // Pad to fix PT write->read restriction
+#else
+ blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
+#endif
+
+ nop
+ hw_rei
+
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0012)
+CallPal_OpcDec12:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0013)
+CallPal_OpcDec13:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0014)
+CallPal_OpcDec14:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0015)
+CallPal_OpcDec15:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0016)
+CallPal_OpcDec16:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0017)
+CallPal_OpcDec17:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0018)
+CallPal_OpcDec18:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0019)
+CallPal_OpcDec19:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001A)
+CallPal_OpcDec1A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001B)
+CallPal_OpcDec1B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001C)
+CallPal_OpcDec1C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001D)
+CallPal_OpcDec1D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001E)
+CallPal_OpcDec1E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001F)
+CallPal_OpcDec1F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0020)
+CallPal_OpcDec20:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0021)
+CallPal_OpcDec21:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0022)
+CallPal_OpcDec22:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0023)
+CallPal_OpcDec23:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0024)
+CallPal_OpcDec24:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0025)
+CallPal_OpcDec25:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0026)
+CallPal_OpcDec26:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0027)
+CallPal_OpcDec27:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0028)
+CallPal_OpcDec28:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0029)
+CallPal_OpcDec29:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002A)
+CallPal_OpcDec2A:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrfen - PALcode for wrfen instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// a0<0> -> ICSR<FPE>
+// Store new FEN in PCB
+// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
+//
+// Issue: What about pending FP loads when FEN goes from on->off????
+//-
+
+ CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
+Call_Pal_Wrfen:
+ or r31, 1, r13 // Get a one
+ mfpr r1, ev5__icsr // Get current FPE
+
+ sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
+ and r16, 1, r16 // clean new fen
+
+ sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
+ bic r1, r13, r1 // zero icsr<fpe>
+
+ or r1, r12, r1 // Or new FEN into ICSR
+ mfpr r12, pt_pcbb // Get PCBB - E1
+
+ mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
+ stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
+
+ mfpr r31, pt0 // Pad ICSR<FPE> write.
+ mfpr r31, pt0
+
+ mfpr r31, pt0
+// pvc_violate 225 // cuz PVC can't distinguish which bits changed
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x002C)
+CallPal_OpcDec2C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// vptptr <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
+Call_Pal_Wrvptptr:
+ mtpr r16, ev5__mvptbr // Load Mbox copy
+ mtpr r16, ev5__ivptbr // Load Ibox copy
+ nop // Pad IPR write
+ nop
+ hw_rei
+
+ CALL_PAL_PRIV(0x002E)
+CallPal_OpcDec2E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002F)
+CallPal_OpcDec2F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "swpctx- PALcode for swpctx instruction"
+
+//+
+//
+// Entry:
+// hardware dispatch via callPal instruction
+// R16 -> new pcb
+//
+// Function:
+// dynamic state moved to old pcb
+// new state loaded from new pcb
+// pcbb pointer set
+// old pcbb returned in R0
+//
+// Note: need to add perf monitor stuff
+//-
+
+ CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
+Call_Pal_Swpctx:
+ rpcc r13 // get cyccounter
+ mfpr r0, pt_pcbb // get pcbb
+
+ ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
+ ldqp r23, osfpcb_l_cc(r16) // get new asn
+
+ srl r13, 32, r25 // move offset
+ mfpr r24, pt_usp // get usp
+
+ stqp r30, osfpcb_q_ksp(r0) // store old ksp
+// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
+ mtpr r16, pt_pcbb // set new pcbb
+
+ stqp r24, osfpcb_q_usp(r0) // store usp
+ addl r13, r25, r25 // merge for new time
+
+ stlp r25, osfpcb_l_cc(r0) // save time
+ ldah r24, (1<<(icsr_v_fpe-16))(r31)
+
+ and r22, 1, r12 // isolate fen
+ mfpr r25, icsr // get current icsr
+
+ ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
+ br r31, swpctx_cont
+
+// .sbttl "wrval - PALcode for wrval instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// sysvalue <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
+Call_Pal_Wrval:
+ nop
+ mtpr r16, pt_sysval // Pad paltemp write
+ nop
+ nop
+ hw_rei
+
+
+// .sbttl "rdval - PALcode for rdval instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- sysvalue
+//-
+
+ CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
+Call_Pal_Rdval:
+ nop
+ mfpr r0, pt_sysval
+ nop
+ hw_rei
+
+// .sbttl "tbi - PALcode for tbi instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// TB invalidate
+// r16/a0 = TBI type
+// r17/a1 = Va for TBISx instructions
+//-
+
+ CALL_PAL_PRIV(PAL_TBI_ENTRY)
+Call_Pal_Tbi:
+ addq r16, 2, r16 // change range to 0-2
+ br r23, CALL_PAL_tbi_10_ // get our address
+
+CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
+ lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
+ sll r16, 4, r16 // * 16
+ blbc r22, CALL_PAL_tbi_30_ // go rei, if not
+
+ addq r23, r16, r23 // addr of our code
+//orig pvc_jsr tbi
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_tbi_30_:
+ hw_rei
+ nop
+
+// .sbttl "wrent - PALcode for wrent instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Update ent* in paltemps
+// r16/a0 = Address of entry routine
+// r17/a1 = Entry Number 0..5
+//
+// r22, r23 trashed
+//-
+
+ CALL_PAL_PRIV(PAL_WRENT_ENTRY)
+Call_Pal_Wrent:
+ cmpult r17, 6, r22 // see if in range
+ br r23, CALL_PAL_wrent_10_ // get our address
+
+CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
+ blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
+
+ lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
+ sll r17, 4, r17 // *16
+
+ addq r17, r23, r23 // Get address in table
+//orig pvc_jsr wrent
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_wrent_30_:
+ hw_rei // out of range, just return
+
+// .sbttl "swpipl - PALcode for swpipl instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- PS<IPL>
+// PS<IPL> <- a0<2:0> (r16)
+//
+// t8 (r22) is scratch
+//-
+
+ CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
+Call_Pal_Swpipl:
+ and r16, osfps_m_ipl, r16 // clean New ipl
+ mfpr r22, pt_intmask // get int mask
+
+ extbl r22, r16, r22 // get mask for this ipl
+ bis r11, r31, r0 // return old ipl
+
+ bis r16, r31, r11 // set new ps
+ mtpr r22, ev5__ipl // set new mask
+
+ mfpr r31, pt0 // pad ipl write
+ mfpr r31, pt0 // pad ipl write
+
+ hw_rei // back
+
+// .sbttl "rdps - PALcode for rdps instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- ps
+//-
+
+ CALL_PAL_PRIV(PAL_RDPS_ENTRY)
+Call_Pal_Rdps:
+ bis r11, r31, r0 // Fetch PALshadow PS
+ nop // Must be 2 cycles long
+ hw_rei
+
+// .sbttl "wrkgp - PALcode for wrkgp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// kgp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
+Call_Pal_Wrkgp:
+ nop
+ mtpr r16, pt_kgp
+ nop // Pad for pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrusp - PALcode for wrusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// usp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
+Call_Pal_Wrusp:
+ nop
+ mtpr r16, pt_usp
+ nop // Pad possible pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+//
+// Function:
+// Various control functions for the onchip performance counters
+//
+// option selector in r16
+// option argument in r17
+// returned status in r0
+//
+//
+// r16 = 0 Disable performance monitoring for one or more cpu's
+// r17 = 0 disable no counters
+// r17 = bitmask disable counters specified in bit mask (1=disable)
+//
+// r16 = 1 Enable performance monitoring for one or more cpu's
+// r17 = 0 enable no counters
+// r17 = bitmask enable counters specified in bit mask (1=enable)
+//
+// r16 = 2 Mux select for one or more cpu's
+// r17 = Mux selection (cpu specific)
+// <24:19> bc_ctl<pm_mux_sel> field (see spec)
+// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
+//
+// r16 = 3 Options
+// r17 = (cpu specific)
+// <0> = 0 log all processes
+// <0> = 1 log only selected processes
+// <30,9,8> mode select - ku,kp,kk
+//
+// r16 = 4 Interrupt frequency select
+// r17 = (cpu specific) indicates interrupt frequencies desired for each
+// counter, with "zero interrupts" being an option
+// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
+//
+// r16 = 5 Read Counters
+// r17 = na
+// r0 = value (same format as ev5 pmctr)
+// <0> = 0 Read failed
+// <0> = 1 Read succeeded
+//
+// r16 = 6 Write Counters
+// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
+//
+// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
+// r17 = 0 enable no counters
+// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
+//
+//=============================================================================
+//Assumptions:
+//PMCTR_CTL:
+//
+// <15:14> CTL0 -- encoded frequency select and enable - CTR0
+// <13:12> CTL1 -- " - CTR1
+// <11:10> CTL2 -- " - CTR2
+//
+// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
+// <7:6> FRQ1 -- frequency select for CTR1
+// <5:4> FRQ2 -- frequency select for CTR2
+//
+// <0> all vs. select processes (0=all,1=select)
+//
+// where
+// FRQx<1:0>
+// 0 1 disable interrupt
+// 1 0 frequency = 65536 (16384 for ctr2)
+// 1 1 frequency = 256
+// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
+//
+//=============================================================================
+//
+ CALL_PAL_PRIV(0x0039)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_Wrperfmon:
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+ cmpeq r16, 1, r0 // check for enable
+ bne r0, perfmon_en // br if requested to enable
+
+ cmpeq r16, 2, r0 // check for mux ctl
+ bne r0, perfmon_muxctl // br if request to set mux controls
+
+ cmpeq r16, 3, r0 // check for options
+ bne r0, perfmon_ctl // br if request to set options
+
+ cmpeq r16, 4, r0 // check for interrupt frequency select
+ bne r0, perfmon_freq // br if request to change frequency select
+
+ cmpeq r16, 5, r0 // check for counter read request
+ bne r0, perfmon_rd // br if request to read counters
+
+ cmpeq r16, 6, r0 // check for counter write request
+ bne r0, perfmon_wr // br if request to write counters
+
+ cmpeq r16, 7, r0 // check for counter clear/enable request
+ bne r0, perfmon_enclr // br if request to clear/enable counters
+
+ beq r16, perfmon_dis // br if requested to disable (r16=0)
+ br r31, perfmon_unknown // br if unknown request
+#else
+
+ br r31, pal_perfmon_debug
+#endif
+
+// .sbttl "rdusp - PALcode for rdusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- usp
+//-
+
+ CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
+Call_Pal_Rdusp:
+ nop
+ mfpr r0, pt_usp
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x003B)
+CallPal_OpcDec3B:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "whami - PALcode for whami instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- whami
+//-
+ CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
+Call_Pal_Whami:
+ nop
+ mfpr r0, pt_whami // Get Whami
+ extbl r0, 1, r0 // Isolate just whami bits
+ hw_rei
+
+// .sbttl "retsys - PALcode for retsys instruction"
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// 00(sp) contains return pc
+// 08(sp) contains r29
+//
+// Function:
+// Return from system call.
+// mode switched from kern to user.
+// stacks swapped, ugp, upc restored.
+// r23, r25 junked
+//-
+
+ CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
+Call_Pal_Retsys:
+ lda r25, osfsf_c_size(sp) // pop stack
+ bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save exc_addr in case of fault
+ ldq r23, osfsf_pc(sp) // get pc
+
+ ldq r29, osfsf_gp(sp) // get gp
+ stl_c r31, -4(sp) // clear lock_flag
+
+ lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
+ mfpr r30, pt_usp // get users stack
+
+ bic r23, 3, r23 // clean return pc
+ mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
+
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
+ mtpr r25, pt_ksp // save kern stack
+
+ rc r31 // clear inter_flag
+// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
+ hw_rei_spe // and back
+
+
+ CALL_PAL_PRIV(0x003E)
+CallPal_OpcDec3E:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rti - PALcode for rti instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// 00(sp) -> ps
+// 08(sp) -> pc
+// 16(sp) -> r29 (gp)
+// 24(sp) -> r16 (a0)
+// 32(sp) -> r17 (a1)
+// 40(sp) -> r18 (a3)
+//-
+
+ CALL_PAL_PRIV(PAL_RTI_ENTRY)
+#ifdef SIMOS
+ /* called once by platform_tlaser */
+ .globl Call_Pal_Rti
+#endif
+Call_Pal_Rti:
+ lda r25, osfsf_c_size(sp) // get updated sp
+ bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save PC in case of fault
+ rc r31 // clear intr_flag
+
+ ldq r12, -6*8(r25) // get ps
+ ldq r13, -5*8(r25) // pc
+
+ ldq r18, -1*8(r25) // a2
+ ldq r17, -2*8(r25) // a1
+
+ ldq r16, -3*8(r25) // a0
+ ldq r29, -4*8(r25) // gp
+
+ bic r13, 3, r13 // clean return pc
+ stl_c r31, -4(r25) // clear lock_flag
+
+ and r12, osfps_m_mode, r11 // get mode
+ mtpr r13, exc_addr // set return address
+
+ beq r11, rti_to_kern // br if rti to Kern
+ br r31, rti_to_user // out of call_pal space
+
+
+// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
+// .sbttl "bpt- PALcode for bpt instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ .text 1
+// . = 0x3000
+ CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
+Call_Pal_Bpt:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bpt_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bpt, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "bugchk- PALcode for bugchk instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
+Call_Pal_Bugchk:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bugchk_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bugchk, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+ CALL_PAL_UNPRIV(0x0082)
+CallPal_OpcDec82:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "callsys - PALcode for callsys instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Switch mode to kernel and build a callsys stack frame.
+// sp = ksp
+// gp = kgp
+// t8 - t10 (r22-r24) trashed
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
+Call_Pal_Callsys:
+
+ and r11, osfps_m_mode, r24 // get mode
+ mfpr r22, pt_ksp // get ksp
+
+ beq r24, sys_from_kern // sysCall from kern is not allowed
+ mfpr r12, pt_entsys // get address of callSys routine
+
+//+
+// from here on we know we are in user going to Kern
+//-
+ mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ bis r31, r31, r11 // PS=0 (mode=kern)
+ mfpr r23, exc_addr // get pc
+
+ mtpr r30, pt_usp // save usp
+ lda sp, 0-osfsf_c_size(r22)// set new sp
+
+ stq r29, osfsf_gp(sp) // save user gp/r29
+ stq r24, osfsf_ps(sp) // save ps
+
+ stq r23, osfsf_pc(sp) // save pc
+ mtpr r12, exc_addr // set address
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kern gp/r29
+
+ hw_rei_spe // and off we go!
+
+
+ CALL_PAL_UNPRIV(0x0084)
+CallPal_OpcDec84:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0085)
+CallPal_OpcDec85:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "imb - PALcode for imb instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Flush the writebuffer and flush the Icache
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
+Call_Pal_Imb:
+ mb // Clear the writebuffer
+ mfpr r31, ev5__mcsr // Sync with clear
+ nop
+ nop
+ br r31, pal_ic_flush // Flush Icache
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x0087)
+CallPal_OpcDec87:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0088)
+CallPal_OpcDec88:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0089)
+CallPal_OpcDec89:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008A)
+CallPal_OpcDec8A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008B)
+CallPal_OpcDec8B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008C)
+CallPal_OpcDec8C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008D)
+CallPal_OpcDec8D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008E)
+CallPal_OpcDec8E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008F)
+CallPal_OpcDec8F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0090)
+CallPal_OpcDec90:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0091)
+CallPal_OpcDec91:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0092)
+CallPal_OpcDec92:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0093)
+CallPal_OpcDec93:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0094)
+CallPal_OpcDec94:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0095)
+CallPal_OpcDec95:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0096)
+CallPal_OpcDec96:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0097)
+CallPal_OpcDec97:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0098)
+CallPal_OpcDec98:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0099)
+CallPal_OpcDec99:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009A)
+CallPal_OpcDec9A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009B)
+CallPal_OpcDec9B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009C)
+CallPal_OpcDec9C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009D)
+CallPal_OpcDec9D:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdunique - PALcode for rdunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- unique
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
+CALL_PALrdunique_:
+ mfpr r0, pt_pcbb // get pcb pointer
+ ldqp r0, osfpcb_q_unique(r0) // get new value
+
+ hw_rei
+
+// .sbttl "wrunique - PALcode for wrunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// unique <- a0 (r16)
+//
+//-
+//
+CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
+CALL_PAL_Wrunique:
+ nop
+ mfpr r12, pt_pcbb // get pcb pointer
+ stqp r16, osfpcb_q_unique(r12)// get new value
+ nop // Pad palshadow write
+ hw_rei // back
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00A0)
+CallPal_OpcDecA0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A1)
+CallPal_OpcDecA1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A2)
+CallPal_OpcDecA2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A3)
+CallPal_OpcDecA3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A4)
+CallPal_OpcDecA4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A5)
+CallPal_OpcDecA5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A6)
+CallPal_OpcDecA6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A7)
+CallPal_OpcDecA7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A8)
+CallPal_OpcDecA8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A9)
+CallPal_OpcDecA9:
+ br r31, osfpal_calpal_opcdec
+
+
+// .sbttl "gentrap - PALcode for gentrap instruction"
+//+
+// CALL_PAL_gentrap:
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ CALL_PAL_UNPRIV(0x00AA)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_gentrap:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_gentrap_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_gentrap, r16// set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00AB)
+CallPal_OpcDecAB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AC)
+CallPal_OpcDecAC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AD)
+CallPal_OpcDecAD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AE)
+CallPal_OpcDecAE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AF)
+CallPal_OpcDecAF:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B0)
+CallPal_OpcDecB0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B1)
+CallPal_OpcDecB1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B2)
+CallPal_OpcDecB2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B3)
+CallPal_OpcDecB3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B4)
+CallPal_OpcDecB4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B5)
+CallPal_OpcDecB5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B6)
+CallPal_OpcDecB6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B7)
+CallPal_OpcDecB7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B8)
+CallPal_OpcDecB8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B9)
+CallPal_OpcDecB9:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BA)
+CallPal_OpcDecBA:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BB)
+CallPal_OpcDecBB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BC)
+CallPal_OpcDecBC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BD)
+CallPal_OpcDecBD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BE)
+CallPal_OpcDecBE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BF)
+CallPal_OpcDecBF:
+ // MODIFIED BY EGH 2/25/04
+ br r31, copypal_impl
+
+
+/*======================================================================*/
+/* OSF/1 CALL_PAL CONTINUATION AREA */
+/*======================================================================*/
+
+ .text 2
+
+ . = 0x4000
+
+
+// .sbttl "Continuation of MTPR_PERFMON"
+ ALIGN_BLOCK
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+// mux ctl
+perfmon_muxctl:
+ lda r8, 1(r31) // get a 1
+ sll r8, pmctr_v_sel0, r8 // move to sel0 position
+ or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
+ and r17, r8, r25 // isolate pmctr mux select bits
+ mfpr r0, ev5__pmctr
+ bic r0, r8, r0 // clear old mux select bits
+ or r0,r25, r25 // or in new mux select bits
+ mtpr r25, ev5__pmctr
+
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, bc_ctl_v_pm_mux_sel, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+ br r31, perfmon_success
+
+
+// requested to disable perf monitoring
+perfmon_dis:
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+perfmon_dis_ctr0: // and begin with ctr0
+ blbc r17, perfmon_dis_ctr1 // do not disable ctr0
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl0, r8
+ bic r14, r8, r14 // disable ctr0
+perfmon_dis_ctr1:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_ctr2 // do not disable ctr1
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl1, r8
+ bic r14, r8, r14 // disable ctr1
+perfmon_dis_ctr2:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_update // do not disable ctr2
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl2, r8
+ bic r14, r8, r14 // disable ctr2
+perfmon_dis_update:
+ mtpr r14, ev5__pmctr // update pmctr ipr
+//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
+// adapted from ev5_pal_macros.mar
+//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
+
+ lda r17, 0x3F(r31) // build mask
+ sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
+ and r14, r17, r14 // isolate ctl bits
+ bic r8, r17, r8 // clear out old ctl bits
+ or r14, r8, r14 // create shadow ctl bits
+//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
+//adjusted impure pointer still in r25
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
+
+ br r31, perfmon_success
+
+
+// requested to enable perf monitoring
+//;the following code can be greatly simplified for pass2, but should work fine as is.
+
+
+perfmon_enclr:
+ lda r9, 1(r31) // set enclr flag
+ br perfmon_en_cont
+
+perfmon_en:
+ bis r31, r31, r9 // clear enclr flag
+
+perfmon_en_cont:
+ mfpr r8, pt_pcbb // get PCB base
+//orig get_pmctr_ctl r25, r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
+
+ ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+ srl r16, osfpcb_v_pme, r16 // get pme bit
+ mfpr r13, icsr
+ and r16, 1, r16 // isolate pme bit
+
+ // this code only needed in pass2 and later
+//orig sget_addr r12, 1<<icsr_v_pmp, r31
+ lda r12, 1<<icsr_v_pmp(r31) // pb
+ bic r13, r12, r13 // clear pmp bit
+ sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
+ or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
+ ev5_pass2 mtpr r13, icsr // update icsr
+
+#if ev5_p1 != 0
+ lda r12, 1(r31)
+ cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
+#else
+ bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
+#endif
+
+ sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
+ bis r14, r31, r13 // copy pmctr
+
+perfmon_en_ctr0: // and begin with ctr0
+ blbc r17, perfmon_en_ctr1 // do not enable ctr0
+
+ blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr0<15:0> mask
+ sll r8, pmctr_v_ctr0, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr0:
+//orig get_addr r8, 3<<pmctr_v_ctl0, r31
+ LDLI(r8, (3<<pmctr_v_ctl0))
+ and r25, r8, r12 //isolate frequency select bits for ctr0
+ bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl0 bits
+
+perfmon_en_ctr1: // enable ctr1
+ srl r17, 1, r17 // get ctr1 enable
+ blbc r17, perfmon_en_ctr2 // do not enable ctr1
+
+ blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr1<15:0> mask
+ sll r8, pmctr_v_ctr1, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr1:
+//orig get_addr r8, 3<<pmctr_v_ctl1, r31
+ LDLI(r8, (3<<pmctr_v_ctl1))
+ and r25, r8, r12 //isolate frequency select bits for ctr1
+ bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl1 bits
+
+perfmon_en_ctr2: // enable ctr2
+ srl r17, 1, r17 // get ctr2 enable
+ blbc r17, perfmon_en_return // do not enable ctr2 - return
+
+ blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr2:
+//orig get_addr r8, 3<<pmctr_v_ctl2, r31
+ LDLI(r8, (3<<pmctr_v_ctl2))
+ and r25, r8, r12 //isolate frequency select bits for ctr2
+ bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl2 bits
+
+perfmon_en_return:
+ cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
+ // else only do the counter clears
+ mtpr r13, ev5__pmctr // update pmctr ipr
+
+//;this code not needed for pass2 and later, but does not hurt to leave it in
+ lda r8, 0x3F(r31)
+//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
+
+ sll r8, pmctr_v_ctl2, r8 // build ctl mask
+ and r8, r14, r14 // isolate new ctl bits
+ bic r25, r8, r25 // clear out old ctl value
+ or r25, r14, r14 // create new pmctr_ctl
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+
+// options...
+perfmon_ctl:
+
+// set mode
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
+ LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
+ mfpr r0, ev5__pmctr
+ and r17, r8, r25 // isolate pmctr mode bits
+ bic r0, r8, r0 // clear old mode bits
+ or r0, r25, r25 // or in new mode bits
+ mtpr r25, ev5__pmctr
+
+//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
+ mfpr r8, icsr
+ lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
+ bic r8, r25, r8 // clear old pma bit
+ cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
+ or r8, r25, r8
+ ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
+ mfpr r31, pt0 // pad icsr write
+ mfpr r31, pt0 // pad icsr write
+
+//;the following code not needed for pass2 and later, but should work anyway.
+ bis r14, 1, r14 // set for select processes
+ blbs r17, perfmon_sp // branch if select processes
+ bic r14, 1, r14 // all processes
+perfmon_sp:
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+ br r31, perfmon_success
+
+// counter frequency select
+perfmon_freq:
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+ lda r8, 0x3F(r31)
+//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
+// I guess this should be a shift of 4 bits from the above control register structure .. pb
+#define pmctr_ctl_v_frq2_SHIFT 4
+ sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
+
+ and r8, r17, r17
+ bic r14, r8, r14 // clear out old frequency select bits
+
+ or r17, r14, r14 // or in new frequency select info
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+// read counters
+perfmon_rd:
+ mfpr r0, ev5__pmctr
+ or r0, 1, r0 // or in return status
+ hw_rei // back to user
+
+// write counters
+perfmon_wr:
+ mfpr r14, ev5__pmctr
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+
+//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
+ LDLI(r9, (0xFFFFFFFF))
+ sll r9, pmctr_v_ctr1, r9
+ or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
+ bic r14, r8, r14 // clear ctr fields
+ and r17, r8, r25 // clear all but ctr fields
+ or r25, r14, r14 // write ctr fields
+ mtpr r14, ev5__pmctr // update pmctr ipr
+
+ mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
+
+perfmon_success:
+ or r31, 1, r0 // set success
+ hw_rei // back to user
+
+perfmon_unknown:
+ or r31, r31, r0 // set fail
+ hw_rei // back to user
+
+#else
+
+// end of "real code", start of debug code
+
+//+
+// Debug environment:
+// (in pass2, always set icsr<pma> to ensure master counter enable is on)
+// R16 = 0 Write to on-chip performance monitor ipr
+// r17 = on-chip ipr
+// r0 = return value of read of on-chip performance monitor ipr
+// R16 = 1 Setup Cbox mux selects
+// r17 = Cbox mux selects in same position as in bc_ctl ipr.
+// r0 = return value of read of on-chip performance monitor ipr
+//
+//-
+pal_perfmon_debug:
+ mfpr r8, icsr
+ lda r9, 1<<icsr_v_pma(r31)
+ bis r8, r9, r8
+ mtpr r8, icsr
+
+ mfpr r0, ev5__pmctr // read old value
+ bne r16, cbox_mux_sel
+
+ mtpr r17, ev5__pmctr // update pmctr ipr
+ br r31, end_pm
+
+cbox_mux_sel:
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, BC_CTL_V_PM_MUX_SEL, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+end_pm: hw_rei
+
+#endif
+
+
+//;The following code is a workaround for a cpu bug where Istream prefetches to
+//;super-page address space in user mode may escape off-chip.
+#if spe_fix != 0
+
+ ALIGN_BLOCK
+hw_rei_update_spe:
+ mfpr r12, pt_misc // get previous mode
+ srl r11, osfps_v_mode, r10 // isolate current mode bit
+ and r10, 1, r10
+ extbl r12, 7, r8 // get previous mode field
+ and r8, 1, r8 // isolate previous mode bit
+ cmpeq r10, r8, r8 // compare previous and current modes
+ beq r8, hw_rei_update_spe_5_
+ hw_rei // if same, just return
+
+hw_rei_update_spe_5_:
+
+#if fill_err_hack != 0
+
+ fill_error_hack
+#endif
+
+ mfpr r8, icsr // get current icsr value
+ ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
+ bic r8, r9, r8 // disable spe
+ xor r10, 1, r9 // flip mode for new spe bit
+ sll r9, icsr_v_spe+1, r9 // shift into position
+ bis r8, r9, r8 // enable/disable spe
+ lda r9, 1(r31) // now update our flag
+ sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
+ bic r12, r9, r12 // clear saved previous mode
+ sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
+ bis r12, r9, r12 // set saved current mode
+ mtpr r12, pt_misc // update pt_misc
+ mtpr r8, icsr // update icsr
+
+#if osf_chm_fix != 0
+
+
+ blbc r10, hw_rei_update_spe_10_ // branch if not user mode
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
+ mtpr r12, dc_mode // Turn on dcache
+ mtpr r31, dc_flush // and flush it
+ br r31, pal_ic_flush
+
+hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
+ ldqp r9, osfpcb_q_Fen(r9) // get FEN
+ blbc r9, pal_ic_flush // return if FP disabled
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn off dcache
+#endif
+
+
+ br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
+#endif
+
+
+copypal_impl:
+ mov r16, r0
+ and r16, 63, r8
+ and r17, 63, r9
+ bis r8, r9, r8
+ bne r8, cache_copy_done
+ bic r18, 63, r8
+ and r18, 63, r18
+ beq r8, cache_copy_done
+ cache_loop:
+ ldf f17, 0(r16)
+ stf f17, 0(r16)
+ addq r17, 64, r17
+ addq r16, 64, r16
+ subq r8, 64, r8
+ bne r8, cache_loop
+cache_copy_done:
+ ble r18, finished #if len <=0 we are finished
+ ldq_u r8, 0(r17)
+ xor r17, r16, r9
+ and r9, 7, r9
+ and r16, 7, r10
+ bne r9, unaligned
+ beq r10, aligned
+ ldq_u r9, 0(r16)
+ addq r18, r10, r18
+ mskqh r8, r17, r8
+ mskql r9, r17, r9
+ bis r8, r9, r8
+aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, aligned_done
+loop:
+ stq_u r8, 0(r16)
+ ldq_u r8, 8(r17)
+ subq r10, 8, r10
+ lda r16,8(r16)
+ lda r17,8(r17)
+ bne r10, loop
+aligned_done:
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+ few_left:
+ mskql r8, r18, r10
+ ldq_u r9, 0(r16)
+ mskqh r9, r18, r9
+ bis r10, r9, r10
+ stq_u r10, 0(r16)
+ br r31, finished
+unaligned:
+ addq r17, r18, r25
+ cmpule r18, 8, r9
+ bne r9, unaligned_few_left
+ beq r10, unaligned_dest_aligned
+ and r16, 7, r10
+ subq r31, r10, r10
+ addq r10, 8, r10
+ ldq_u r9, 7(r17)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r12
+ insql r12, r16, r12
+ ldq_u r13, 0(r16)
+ mskql r13, r16, r13
+ bis r12, r13, r12
+ stq_u r12, 0(r16)
+ addq r16, r10, r16
+ addq r17, r10, r17
+ subq r18, r10, r18
+ ldq_u r8, 0(r17)
+unaligned_dest_aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, unaligned_partial_left
+unaligned_loop:
+ ldq_u r9, 7(r17)
+ lda r17, 8(r17)
+ extql r8, r17, r12
+ extqh r9, r17, r13
+ subq r10, 8, r10
+ bis r12, r13, r13
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ beq r10, unaligned_second_partial_left
+ ldq_u r8, 7(r17)
+ lda r17, 8(r17)
+ extql r9, r17, r12
+ extqh r8, r17, r13
+ bis r12, r13, r13
+ subq r10, 8, r10
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ bne r10, unaligned_loop
+unaligned_partial_left:
+ mov r8, r9
+unaligned_second_partial_left:
+ ldq_u r8, -1(r25)
+ extql r9, r17, r9
+ extqh r8, r17, r8
+ bis r8, r9, r8
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+unaligned_few_left:
+ ldq_u r9, -1(r25)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r8
+ insqh r8, r16, r9
+ insql r8, r16, r8
+ lda r12, -1(r31)
+ mskql r12, r18, r13
+ cmovne r13, r13, r12
+ insqh r12, r16, r13
+ insql r12, r16, r12
+ addq r16, r18, r10
+ ldq_u r14, 0(r16)
+ ldq_u r25, -1(r10)
+ bic r14, r12, r14
+ bic r25, r13, r25
+ and r8, r12, r8
+ and r9, r13, r9
+ bis r8, r14, r8
+ bis r9, r25, r9
+ stq_u r9, -1(r10)
+ stq_u r8, 0(r16)
+finished:
+ hw_rei
diff --git a/system/alpha/palcode/osfpal_cache_copy.s b/system/alpha/palcode/osfpal_cache_copy.s
deleted file mode 100644
index 3509b369a..000000000
--- a/system/alpha/palcode/osfpal_cache_copy.s
+++ /dev/null
@@ -1,5257 +0,0 @@
-// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
-// since we don't have a mechanism to expand the data structures.... pb Nov/95
-
-// build_fixed_image: not sure what means
-// real_mm to be replaced during rewrite
-// remove_save_state remove_restore_state can be remooved to save space ??
-
-
-#include "ev5_defs.h"
-#include "ev5_impure.h"
-#include "ev5_alpha_defs.h"
-#include "ev5_paldef.h"
-#include "ev5_osfalpha_defs.h"
-#include "fromHudsonMacros.h"
-#include "fromHudsonOsf.h"
-#include "dc21164FromGasSources.h"
-
-#ifdef SIMOS
-#define DEBUGSTORE(c) nop
-#else
-#define DEBUGSTORE(c) \
- lda r13, c(zero) ; \
- bsr r25, debugstore
-#endif
-
-#define DEBUG_EXC_ADDR()\
- bsr r25, put_exc_addr; \
- DEBUGSTORE(13) ; \
- DEBUGSTORE(10)
-
-#define egore 0
-#define acore 0
-#define beh_model 0
-#define ev5_p2 1
-#define ev5_p1 0
-#define ldvpte_bug_fix 1
-#define osf_chm_fix 0
-
-// Do we want to do this?? pb
-#define spe_fix 0
-// Do we want to do this?? pb
-#define build_fixed_image 0
-
-#define ev5_pass2
-#define enable_p4_fixups 0
-#define osf_svmin 1
-#define enable_physical_console 0
-#define fill_err_hack 0
-#define icflush_on_tbix 0
-#define max_cpuid 1
-#define perfmon_debug 0
-#define rawhide_system 0
-#define rax_mode 0
-
-
-// This is the fix for the user-mode super page references causing the machine to crash.
-#if (spe_fix == 1) && (build_fixed_image==1)
-#define hw_rei_spe br r31, hw_rei_update_spe
-#else
-#define hw_rei_spe hw_rei
-#endif
-
-
-// redefine a few of the distribution-code names to match the Hudson gas names.
-// opcodes
-#define ldqp ldq_p
-#define stqp stq_p
-#define ldlp ldl_p
-#define stlp stl_p
-
-#define r0 $0
-#define r1 $1
-#define r2 $2
-#define r3 $3
-#define r4 $4
-#define r5 $5
-#define r6 $6
-#define r7 $7
-#define r8 $8
-#define r9 $9
-#define r10 $10
-#define r11 $11
-#define r12 $12
-#define r13 $13
-#define r14 $14
-#define r15 $15
-#define r16 $16
-#define r17 $17
-#define r18 $18
-#define r19 $19
-#define r20 $20
-#define r21 $21
-#define r22 $22
-#define r23 $23
-#define r24 $24
-#define r25 $25
-#define r26 $26
-#define r27 $27
-#define r28 $28
-#define r29 $29
-#define r30 $30
-#define r31 $31
-
-// .title "EV5 OSF PAL"
-// .ident "V1.18"
-//
-//****************************************************************************
-//* *
-//* Copyright (c) 1992, 1993, 1994, 1995 *
-//* by DIGITAL Equipment Corporation, Maynard, Mass. *
-//* *
-//* This software is furnished under a license and may be used and copied *
-//* only in accordance with the terms of such license and with the *
-//* inclusion of the above copyright notice. This software or any other *
-//* copies thereof may not be provided or otherwise made available to any *
-//* other person. No title to and ownership of the software is hereby *
-//* transferred. *
-//* *
-//* The information in this software is subject to change without notice *
-//* and should not be construed as a commitment by DIGITAL Equipment *
-//* Corporation. *
-//* *
-//* DIGITAL assumes no responsibility for the use or reliability of its *
-//* software on equipment which is not supplied by DIGITAL. *
-//* *
-//****************************************************************************
-
-// .sbttl "Edit History"
-//+
-// Who Rev When What
-// ------------ --- ----------- --------------------------------
-// DB 0.0 03-Nov-1992 Start
-// DB 0.1 28-Dec-1992 add swpctx
-// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
-// DB 0.3 11-Jan-1993 rearrange trap entry points
-// DB 0.4 01-Feb-1993 add tbi
-// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
-// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
-// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
-// Bug: typo on register number for store in wrunique
-// Bug: rti to kern uses r16 as scratch
-// Bug: callsys saving wrong value in pt_usp
-// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
-// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
-// Bug: rti stl_c could corrupt the stack
-// Bug: unaligned returning wrong value in r17 (or should be and)
-// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
-// DB 0.11 23-Feb-1993 Turn caches on in reset flow
-// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
-// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
-// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
-// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
-// DB 0.16 12-May-1993 Update reset
-// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
-// Bug: in wrmces, not clearing DPC, DSC
-// Update swppal
-// Add pal bugchecks, pal_save_state, pal_restore_state
-// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
-// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
-// DB 0.18 26-May-1993 PVC fixes
-// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
-// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
-// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
-// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
-// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
-// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
-// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
-// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
-// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
-// JM 0.22 28-jul-1993 Add WRIPIR instruction
-// JM 0.23 05-aug-1993 Bump version number for release
-// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
-// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
-// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
-// and SWPCTX
-// JM 0.26 07-oct-1993 Re-implement pal_version
-// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
-// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
-// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
-// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
-// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
-// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
-// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
-// JM 0.33 24-nov-1993 save/restore_state -
-// BUG: use ivptbr to restore mvptbr
-// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
-// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
-// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
-// BUG: generate ksnv halt when tb miss on kernel stack accesses
-// save exc_addr in r14 for invalid_dpte stack builder
-// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
-// the same shadow
-// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
-// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
-// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
-// Hide impure area manipulations in macros
-// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
-// Add some pvc_violate statements
-// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
-// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
-// Add code to ensure fen bit set in icsr before ldt
-// conditionally compile rax_more_reset out.
-// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
-// move rax reset stuff to ev5_osf_system_pal.m64
-// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
-// and performance monitoring bits
-// Change to save_state routine to save more iprs.
-// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
-// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
-// remove_save_state,remove_restore_state;fix new pvc violation in save_state
-// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
-// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
-// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
-// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
-// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
-// Add exc_sum and exc_mask to pal_save_state (not restore)
-// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
-// area.
-// Add performance counter support to swpctx and wrperfmon
-// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
-// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
-// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
-// taken in the interrupt flow, stack is pushed twice.
-// SWPPAL - update to support ECO 59 to allow 0 as a valid address
-// Add itb flush to save/restore state routines
-// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
-// conforms to itbia restriction.
-// Added enable_physical_console flag (for enter/exit console routines only)
-// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
-// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
-// nmiss_fetch_err to nmiss_fetch_ldr31_err.
-// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
-// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
-// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
-// Moved perfmon code here from system file.
-// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
-// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
-// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
-// after ISR read, but we won't catch the ISR update. reverse order
-// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
-// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
-// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
-// DTBMISS_SINGLE if not in palmode.
-// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
-// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
-// superpage mode in User mode and re-enable in kernel mode.
-// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
-// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
-// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
-// cpu bug.
-// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
-// ES 1.13 17-mar-1995 Refine osf_chm_fix
-// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
-// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
-// Force pvc checking of exit_console
-// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
-// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
-// instead of xor to maintain previous mode in pt_misc
-// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
-// not have pme set. The bits in icsr maintain the master enable state.
-// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
-//
-#define vmaj 1
-#define vmin 18
-#define vms_pal 1
-#define osf_pal 2
-#define pal_type osf_pal
-#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
-//-
-
-// .sbttl "PALtemp register usage"
-
-//+
-// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
-// for these PALtemps:
-//
-// pt0 local scratch
-// pt1 local scratch
-// pt2 entUna pt_entUna
-// pt3 CPU specific impure area pointer pt_impure
-// pt4 memory management temp
-// pt5 memory management temp
-// pt6 memory management temp
-// pt7 entIF pt_entIF
-// pt8 intmask pt_intmask
-// pt9 entSys pt_entSys
-// pt10
-// pt11 entInt pt_entInt
-// pt12 entArith pt_entArith
-// pt13 reserved for system specific PAL
-// pt14 reserved for system specific PAL
-// pt15 reserved for system specific PAL
-// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
-// pt17 sysval pt_sysval
-// pt18 usp pt_usp
-// pt19 ksp pt_ksp
-// pt20 PTBR pt_ptbr
-// pt21 entMM pt_entMM
-// pt22 kgp pt_kgp
-// pt23 PCBB pt_pcbb
-//
-//-
-
-// .sbttl "PALshadow register usage"
-//
-//+
-//
-// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
-// This maps the OSF PAL usage of R8 - R14 and R25:
-//
-// r8 ITBmiss/DTBmiss scratch
-// r9 ITBmiss/DTBmiss scratch
-// r10 ITBmiss/DTBmiss scratch
-// r11 PS
-// r12 local scratch
-// r13 local scratch
-// r14 local scratch
-// r25 local scratch
-//
-//
-//-
-
-// .sbttl "ALPHA symbol definitions"
-// _OSF_PSDEF GLOBAL
-// _OSF_PTEDEF GLOBAL
-// _OSF_VADEF GLOBAL
-// _OSF_PCBDEF GLOBAL
-// _OSF_SFDEF GLOBAL
-// _OSF_MMCSR_DEF GLOBAL
-// _SCBDEF GLOBAL
-// _FRMDEF GLOBAL
-// _EXSDEF GLOBAL
-// _OSF_A0_DEF GLOBAL
-// _MCESDEF GLOBAL
-
-// .sbttl "EV5 symbol definitions"
-
-// _EV5DEF
-// _PALTEMP
-// _MM_STAT_DEF
-// _EV5_MM
-// _EV5_IPLDEF
-
-// _HALT_CODES GLOBAL
-// _MCHK_CODES GLOBAL
-
-// _PAL_IMPURE
-// _PAL_LOGOUT
-
-
-
-
-// .sbttl "PALcode configuration options"
-
-// There are a number of options that may be assembled into this version of
-// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
-// the following). The options that can be adjusted cause the resultant PALcode
-// to reflect the desired target system.
-
-
-#define osfpal 1 // This is the PALcode for OSF.
-
-#ifndef rawhide_system
-
-#define rawhide_system 0
-#endif
-
-
-#ifndef real_mm
-// Page table translation vs 1-1 mapping
-#define real_mm 1
-#endif
-
-
-#ifndef rax_mode
-
-#define rax_mode 0
-#endif
-
-#ifndef egore
-// End of reset flow starts a program at 200000(hex).
-#define egore 1
-#endif
-
-#ifndef acore
-// End of reset flow starts a program at 40000(hex).
-#define acore 0
-#endif
-
-
-// assume acore+egore+rax_mode lt 2 // Assertion checker
-
-#ifndef beh_model
-// EV5 behavioral model specific code
-#define beh_model 1
-#endif
-
-#ifndef init_cbox
-// Reset flow init of Bcache and Scache
-#define init_cbox 1
-#endif
-
-#ifndef disable_crd
-// Decides whether the reset flow will disable
-#define disable_crd 0
-#endif
-
- // correctable read interrupts via ICSR
-#ifndef perfmon_debug
-#define perfmon_debug 0
-#endif
-
-#ifndef icflush_on_tbix
-#define icflush_on_tbix 0
-#endif
-
-#ifndef remove_restore_state
-#define remove_restore_state 0
-#endif
-
-#ifndef remove_save_state
-#define remove_save_state 0
-#endif
-
-#ifndef enable_physical_console
-#define enable_physical_console 0
-#endif
-
-#ifndef ev5_p1
-#define ev5_p1 0
-#endif
-
-#ifndef ev5_p2
-#define ev5_p2 1
-#endif
-
-// assume ev5_p1+ev5_p2 eq 1
-
-#ifndef ldvpte_bug_fix
-#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
-#endif
-
-#ifndef spe_fix
-// If set, disable super-page mode in user mode and re-enable
-#define spe_fix 0
-#endif
- // in kernel. Workaround for cpu bug.
-#ifndef build_fixed_image
-#define build_fixed_image 0
-#endif
-
-
-#ifndef fill_err_hack
-// If set, disable fill_error mode in user mode and re-enable
-#define fill_err_hack 0
-#endif
-
- // in kernel. Workaround for cpu bug.
-
-// .macro hw_rei_spe
-// .iif eq spe_fix, hw_rei
-//#if spe_fix != 0
-//
-//
-//#define hw_rei_chm_count hw_rei_chm_count + 1
-// p4_fixup_label \hw_rei_chm_count
-// .iif eq build_fixed_image, br r31, hw_rei_update_spe
-// .iif ne build_fixed_image, hw_rei
-//#endif
-//
-// .endm
-
-// Add flag "osf_chm_fix" to enable dcache in user mode only
-// to avoid cpu bug.
-
-#ifndef osf_chm_fix
-// If set, enable D-Cache in
-#define osf_chm_fix 0
-#endif
-
-#if osf_chm_fix != 0
-// user mode only.
-#define hw_rei_chm_count 0
-#endif
-
-#if osf_chm_fix != 0
-
-#define hw_rei_stall_chm_count 0
-#endif
-
-#ifndef enable_p4_fixups
-
-#define enable_p4_fixups 0
-#endif
-
- // If set, do EV5 Pass 4 fixups
-#if spe_fix == 0
-
-#define osf_chm_fix 0
-#endif
-
-#if spe_fix == 0
-
-#define enable_p4_fixups 0
-#endif
-
- // Only allow fixups if fix enabled
-
- //Turn off fill_errors and MEM_NEM in user mode
-// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
-// //save r22,r23,r24
-// stqp r22, 0x150(r31) //add
-// stqp r23, 0x158(r31) //contents
-// stqp r24, 0x160(r31) //bit mask
-//
-// lda r22, 0x82(r31)
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
-// bis r23,r31,r23
-//
-// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
-// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L20_ // ELSE
-//L10_: bis r23, r24, r23 // clear fillerr_en bit
-//L20_: // ENDIF
-//
-// stlp r23, 0x80(r22) // write back the CIA_MASK register
-// mb
-// ldlp r23, 0x80(r22)
-// bis r23,r31,r23
-// mb
-//
-// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
-// bis r23,r31,r23
-//
-//
-// lda r24, 0x400(r31) // r9 <- fillerr_en bit
-// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L40_ // ELSE
-//L30_: bis r23, r24, r23 // clear fillerr_en bit
-//L40_: // ENDIF
-//
-// stlp r23, 0(r22) // write back the CIA_CTRL register
-// mb
-// ldlp r23, 0(r22)
-// bis r23,r31,r23
-// mb
-//
-// //restore r22,r23,r24
-// ldqp r22, 0x150(r31)
-// ldqp r23, 0x158(r31)
-// ldqp r24, 0x160(r31)
-//
-// .endm
-
-// multiprocessor support can be enabled for a max of n processors by
-// setting the following to the number of processors on the system.
-// Note that this is really the max cpuid.
-
-#ifndef max_cpuid
-#define max_cpuid 8
-#endif
-
-#ifndef osf_svmin // platform specific palcode version number
-#define osf_svmin 0
-#endif
-
-
-#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
-
-// .mcall ldqp // override macro64 definition with macro from library
-// .mcall stqp // override macro64 definition with macro from library
-
-
-// .psect _pal,mix
-// huh pb pal_base:
-// huh pb #define current_block_base . - pal_base
-
-// .sbttl "RESET - Reset Trap Entry Point"
-//+
-// RESET - offset 0000
-// Entry:
-// Vectored into via hardware trap on reset, or branched to
-// on swppal.
-//
-// r0 = whami
-// r1 = pal_base
-// r2 = base of scratch area
-// r3 = halt code
-//
-//
-// Function:
-//
-//-
-
- .text 0
- . = 0x0000
- .globl Pal_Base
-Pal_Base:
- HDW_VECTOR(PAL_RESET_ENTRY)
-Trap_Reset:
- nop
-#ifdef SIMOS
- /*
- * store into r1
- */
- br r1,sys_reset
-#else
- /* following is a srcmax change */
-
- DEBUGSTORE(0x41)
- /* The original code jumped using r1 as a linkage register to pass the base
- of PALcode to the platform specific code. We use r1 to pass a parameter
- from the SROM, so we hardcode the address of Pal_Base in platform.s
- */
- br r31, sys_reset
-#endif
-
- // Specify PAL version info as a constant
- // at a known location (reset + 8).
-
- .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
- .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
- .long 0
- .long 0
-pal_impure_start:
- .quad 0
-pal_debug_ptr:
- .quad 0 // reserved for debug pointer ; 20
-#if beh_model == 0
-
-
-#if enable_p4_fixups != 0
-
-
- .quad 0
- .long p4_fixup_hw_rei_fixup_table
-#endif
-
-#else
-
- .quad 0 //
- .quad 0 //0x0030
- .quad 0
- .quad 0 //0x0040
- .quad 0
- .quad 0 //0x0050
- .quad 0
- .quad 0 //0x0060
- .quad 0
-pal_enter_cns_address:
- .quad 0 //0x0070 -- address to jump to from enter_console
- .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
-#endif
-
-
-
-
-// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
-
-//+
-// IACCVIO - offset 0080
-// Entry:
-// Vectored into via hardware trap on Istream access violation or sign check error on PC.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV)
-// a2 <- -1 (for ifetch fault)
-// vector via entMM
-//-
-
- HDW_VECTOR(PAL_IACCVIO_ENTRY)
-Trap_Iaccvio:
- DEBUGSTORE(0x42)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_IACCVIO_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bic r14, 3, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entmm // get entry point
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r16, osfsf_pc(sp) // save pc
- stq r29, osfsf_gp(sp) // save gp
-
- mtpr r13, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- subq r31, 1, r18 // pass flag of istream, as a2
- hw_rei_spe
-
-
-// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
-
-//+
-// INTERRUPT - offset 0100
-// Entry:
-// Vectored into via trap on hardware interrupt
-//
-// Function:
-// check for halt interrupt
-// check for passive release (current ipl geq requestor)
-// if necessary, switch to kernel mode
-// push stack frame, update ps (including current mode and ipl copies), sp, and gp
-// pass the interrupt info to the system module
-//
-//-
-
-
- HDW_VECTOR(PAL_INTERRUPT_ENTRY)
-Trap_Interrupt:
- mfpr r13, ev5__intid // Fetch level of interruptor
- mfpr r25, ev5__isr // Fetch interrupt summary register
-
- srl r25, isr_v_hlt, r9 // Get HLT bit
- mfpr r14, ev5__ipl
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
- blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
-
- cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
- bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
-
- and r11, osfps_m_mode, r10 // get mode bit
- beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
-
- mtpr r30, pt_usp // save user stack
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_INTERRUPT_10_:
- lda sp, (0-osfsf_c_size)(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r11, osfsf_ps(sp) // save ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // push gp
- stq r16, osfsf_a0(sp) // a0
-
-// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
- stq r17, osfsf_a1(sp) // a1
-
- stq r18, osfsf_a2(sp) // a2
- subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
-
- srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
- subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
-
- cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
- bis r12, r31, r11 // set new ps
-
- mfpr r12, pt_intmask
- and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
-
-#ifdef SIMOS
- /*
- * Lance had space problems. We don't.
- */
- extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
- mfpr r29, pt_kgp // update gp
- mtpr r14, ev5__ipl // load the new IPL into Ibox
-#else
-// Moved the following three lines to sys_interrupt to make room for debug
-// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
-// mfpr r29, pt_kgp // update gp
-
-// mtpr r14, ev5__ipl // load the new IPL into Ibox
-#endif
- br r31, sys_interrupt // Go handle interrupt
-
-
-
-// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
-
-//+
-// ITBMISS - offset 0180
-// Entry:
-// Vectored into via hardware trap on Istream translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//
-//-
-
- HDW_VECTOR(PAL_ITB_MISS_ENTRY)
-Trap_Itbmiss:
-#if real_mm == 0
-
-
- // Simple 1-1 va->pa mapping
-
- nop // Pad to align to E1
- mfpr r8, exc_addr
-
- srl r8, page_offset_size_bits, r9
- sll r9, 32, r9
-
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
- mtpr r9, itb_pte // E1
-
- hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
-#else
-
- // Real MM mapping
- nop
- mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
-
- nop
- mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
-
-pal_itb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- mtpr r10, exc_addr // Restore exc_address if there was a trap.
-
- mfpr r31, ev5__va // Unlock VA in case there was a double miss
- nop
-
- and r8, osfpte_m_foe, r25 // Look for FOE set.
- blbc r8, invalid_ipte_handler // PTE not valid.
-
- nop
- bne r25, foe_ipte_handler // FOE is set
-
- nop
- mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
-
- hw_rei_stall //
-
-#endif
-
-
-
-
-// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_SINGLE - offset 0200
-// Entry:
-// Vectored into via hardware trap on Dstream single translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//-
-
- HDW_VECTOR(PAL_DTB_MISS_ENTRY)
-Trap_Dtbmiss_Single:
-#if real_mm == 0
- // Simple 1-1 va->pa mapping
- mfpr r8, va // E0
- srl r8, page_offset_size_bits, r9
-
- sll r9, 32, r9
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
-
- mtpr r9, dtb_pte // E0
- nop // Pad to align to E0
-
-
-
- mtpr r8, dtb_tag // E0
- nop
-
- nop // Pad tag write
- nop
-
- nop // Pad tag write
- nop
-
- hw_rei
-#else
- mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
- mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
-
-// DEBUGSTORE(0x45)
-// DEBUG_EXC_ADDR()
- // Real MM mapping
- mfpr r9, ev5__mm_stat // Get read/write bit. E0.
- mtpr r10, pt6 // Stash exc_addr away
-
-pal_dtb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- nop // Pad MF VA
-
- mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
- nop
-
- mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
- blbc r8, invalid_dpte_handler // Handle invalid PTE
-
- mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
- mfpr r10, pt6
-
- // Following 2 instructions take 2 cycles
- mtpr r10, exc_addr // Return linkage in case we trapped. E1.
- mfpr r31, pt0 // Pad the write to dtb_tag
-
- hw_rei // Done, return
-#endif
-
-
-
-
-// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_DOUBLE - offset 0280
-// Entry:
-// Vectored into via hardware trap on Double TBmiss from single miss flows.
-//
-// r8 - faulting VA
-// r9 - original MMstat
-// r10 - original exc_addr (both itb,dtb miss)
-// pt6 - original exc_addr (dtb miss flow only)
-// VA IPR - locked with original faulting VA
-//
-// Function:
-// Get PTE, if valid load TB and return.
-// If not valid then take TNV/ACV exception.
-//
-// pt4 and pt5 are reserved for this flow.
-//
-//
-//-
-
- HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
-Trap_Dtbmiss_double:
-#if ldvpte_bug_fix != 0
- mtpr r8, pt4 // save r8 to do exc_addr check
- mfpr r8, exc_addr
- blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
- mfpr r8, pt4 // restore r8
-#endif
- nop
- mtpr r22, pt5 // Get some scratch space. E1.
- // Due to virtual scheme, we can skip the first lookup and go
- // right to fetch of level 2 PTE
- sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- mtpr r21, pt4 // Get some scratch space. E1.
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- mfpr r21, pt_ptbr // Get physical address of the page table.
-
- nop
- addq r21, r22, r21 // Index into page table for level 2 PTE.
-
- sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- blbc r21, double_pte_inv // Check for Invalid PTE.
-
- srl r21, 32, r21 // extract PFN from PTE
- sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
-
- addq r21, r22, r21 // Index into page table for level 3 PTE.
- nop
-
- ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
- blbc r21, double_pte_inv // Check for invalid PTE.
-
- mtpr r21, ev5__dtb_pte // Write the PTE. E0.
- mfpr r22, pt5 // Restore scratch register
-
- mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
- mfpr r21, pt4 // Restore scratch register
-
- nop // Pad write to tag.
- nop
-
- nop // Pad write to tag.
- nop
-
- hw_rei
-
-
-
-// .sbttl "UNALIGN -- Dstream unalign trap"
-//+
-// UNALIGN - offset 0300
-// Entry:
-// Vectored into via hardware trap on unaligned Dstream reference.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- Opcode
-// a2 <- src/dst register number
-// vector via entUna
-//-
-
- HDW_VECTOR(PAL_UNALIGN_ENTRY)
-Trap_Unalign:
-/* DEBUGSTORE(0x47)*/
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
- mfpr r14, exc_addr // get pc
-
- srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
- blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
-
- blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
- // not set, must be a load
- and r13, 0x1F, r8 // isolate ra
-
- cmpeq r8, 0x1F, r8 // check for r31/F31
- bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
-
-UNALIGN_NO_DISMISS:
- bis r11, r31, r12 // Save PS
- bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-UNALIGN_NO_DISMISS_10_:
- mfpr r25, ev5__va // Unlock VA
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- mtpr r25, pt0 // Stash VA
- stq r18, osfsf_a2(sp) // a2
-
- stq r11, osfsf_ps(sp) // save old ps
- srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
-
- stq r29, osfsf_gp(sp) // save gp
- addq r14, 4, r14 // inc PC past the ld/st
-
- stq r17, osfsf_a1(sp) // a1
- and r25, mm_stat_m_opcode, r17// Clean opocde for a1
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r16, pt0 // a0 <- va/unlock
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entuna // get entry point
-
-
- bis r12, r31, r11 // update ps
- br r31, unalign_trap_cont
-
-
-
-
-// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
-
-//+
-// DFAULT - offset 0380
-// Entry:
-// Vectored into via hardware trap on dstream fault or sign check error on DVA.
-//
-// Function:
-// Ignore faults on FETCH/FETCH_M
-// Check for DFAULT in PAL
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
-// a2 <- R/W
-// vector via entMM
-//
-//-
- HDW_VECTOR(PAL_D_FAULT_ENTRY)
-Trap_Dfault:
-// DEBUGSTORE(0x48)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r13, ev5__mm_stat // Get mmstat
- mfpr r8, exc_addr // get pc, preserve r14
-
- srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
- blbs r8, dfault_in_pal
-
- bis r8, r31, r14 // move exc_addr to correct place
- bis r11, r31, r12 // Save PS
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- and r9, mm_stat_m_opcode, r9 // Clean all but opcode
-
- cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
- //dismiss exception if load to r31/f31
- blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
-
- and r9, 0x1F, r9 // isolate rnum
- nop
-
- cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
-dfault_no_dismiss:
- and r13, 0xf, r13 // Clean extra bits in mm_stat
- bge r25, dfault_trap_cont // no stack swap needed if cm=kern
-
-
- mtpr r30, pt_usp // save user stack
- bis r31, r31, r12 // Set new PS
-
- mfpr r30, pt_ksp
- br r31, dfault_trap_cont
-
-
-
-
-
-// .sbttl "MCHK - Machine Check Trap Entry Point"
-
-//+
-// MCHK - offset 0400
-// Entry:
-// Vectored into via hardware trap on machine check.
-//
-// Function:
-//
-//-
-
- HDW_VECTOR(PAL_MCHK_ENTRY)
-Trap_Mchk:
- DEBUGSTORE(0x49)
- mtpr r31, ic_flush_ctl // Flush the Icache
- br r31, sys_machine_check
-
-
-
-
-// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
-
-//+
-// OPCDEC - offset 0480
-// Entry:
-// Vectored into via hardware trap on illegal opcode.
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_OPCDEC_ENTRY)
-Trap_Opcdec:
- DEBUGSTORE(0x4a)
-//simos DEBUG_EXC_ADDR()
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_OPCDEC_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- addq r14, 4, r14 // inc pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r11, osfsf_ps(sp) // save old ps
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r17, osfsf_a1(sp) // a1
-
- stq r29, osfsf_gp(sp) // save gp
- stq r14, osfsf_pc(sp) // save pc
-
- bis r12, r31, r11 // update ps
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei, E1
-
- mfpr r29, pt_kgp // get the kgp, E1
-
- hw_rei_spe // done, E1
-
-
-
-
-
-
-// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
-
-//+
-// ARITH - offset 0500
-// Entry:
-// Vectored into via hardware trap on arithmetic excpetion.
-//
-// Function:
-// Build stack frame
-// a0 <- exc_sum
-// a1 <- exc_mask
-// a2 <- unpred
-// vector via entArith
-//
-//-
- HDW_VECTOR(PAL_ARITH_ENTRY)
-Trap_Arith:
- DEBUGSTORE(0x4b)
- and r11, osfps_m_mode, r12 // get mode bit
- mfpr r31, ev5__va // unlock mbox
-
- bis r11, r31, r25 // save ps
- mfpr r14, exc_addr // get pc
-
- nop
- blbs r14, pal_pal_bug_check // arith trap from PAL
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- beq r12, TRAP_ARITH_10_ // if zero we are in kern now
-
- bis r31, r31, r25 // set the new ps
- mtpr r30, pt_usp // save user stack
-
- nop
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- nop // Pad current mode write and stq
- mfpr r13, ev5__exc_sum // get the exc_sum
-
- mfpr r12, pt_entarith
- stq r14, osfsf_pc(sp) // save pc
-
- stq r17, osfsf_a1(sp)
- mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
-
- stq r11, osfsf_ps(sp) // save ps
- bis r25, r31, r11 // set new ps
-
- stq r16, osfsf_a0(sp) // save regs
- srl r13, exc_sum_v_swc, r16// shift data to correct position
-
- stq r18, osfsf_a2(sp)
-// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
- mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
-
- stq r29, osfsf_gp(sp)
- mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
-
- mfpr r29, pt_kgp // get the kern gp - E1
- hw_rei_spe // done - E1
-
-
-
-
-
-
-// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
-
-//+
-// FEN - offset 0580
-// Entry:
-// Vectored into via hardware trap on illegal FP op.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_FEN_ENTRY)
-Trap_Fen:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- mfpr r13, ev5__icsr
- nop
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_FEN_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
-
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r11, osfsf_ps(sp) // save old ps
-
- stq r29, osfsf_gp(sp) // save gp
- bis r12, r31, r11 // set new ps
-
- stq r17, osfsf_a1(sp) // a1
- blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
-
- bis r31, osf_a0_fen, r16 // set a0
- stq r14, osfsf_pc(sp) // save pc
-
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei -E1
-
- mfpr r29, pt_kgp // get the kgp -E1
-
- hw_rei_spe // done -E1
-
-// FEN trap was taken, but the fault is really opcdec.
- ALIGN_BRANCH
-fen_to_opcdec:
- addq r14, 4, r14 // save PC+4
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r14, osfsf_pc(sp) // save pc
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
- hw_rei_spe // done
-
-
-
-// .sbttl "Misc handlers"
- // Start area for misc code.
-//+
-//dfault_trap_cont
-// A dfault trap has been taken. The sp has been updated if necessary.
-// Push a stack frame a vector via entMM.
-//
-// Current state:
-// r12 - new PS
-// r13 - MMstat
-// VA - locked
-//
-//-
- ALIGN_BLOCK
-dfault_trap_cont:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r25, ev5__va // Fetch VA/unlock
-
- stq r18, osfsf_a2(sp) // a2
- and r13, 1, r18 // Clean r/w bit for a2
-
- stq r16, osfsf_a0(sp) // save regs
- bis r25, r31, r16 // a0 <- va
-
- stq r17, osfsf_a1(sp) // a1
- srl r13, 1, r17 // shift fault bits to right position
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entmm // get entry point
-
- stq r29, osfsf_gp(sp) // save gp
- cmovlbs r17, 1, r17 // a2. acv overrides fox.
-
- mtpr r25, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- hw_rei_spe // done
-
-//+
-//unalign_trap_cont
-// An unalign trap has been taken. Just need to finish up a few things.
-//
-// Current state:
-// r25 - entUna
-// r13 - shifted MMstat
-//
-//-
- ALIGN_BLOCK
-unalign_trap_cont:
- mtpr r25, exc_addr // load exc_addr with entUna
- // 1 cycle to hw_rei
-
-
- mfpr r29, pt_kgp // get the kgp
- and r13, mm_stat_m_ra, r18 // Clean Ra for a2
-
- hw_rei_spe // done
-
-
-
-//+
-// dfault_in_pal
-// Dfault trap was taken, exc_addr points to a PAL PC.
-// r9 - mmstat<opcode> right justified
-// r8 - exception address
-//
-// These are the cases:
-// opcode was STQ -- from a stack builder, KSP not valid halt
-// r14 - original exc_addr
-// r11 - original PS
-// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
-// KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
-// r10 - original exc_addr
-// r11 - original PS
-//
-//
-//-
- ALIGN_BLOCK
-dfault_in_pal:
- DEBUGSTORE(0x50)
- bic r8, 3, r8 // Clean PC
- mfpr r9, pal_base
-
- mfpr r31, va // unlock VA
-#if real_mm != 0
- // if not real_mm, should never get here from miss flows
-
- subq r9, r8, r8 // pal_base - offset
-
- lda r9, pal_itb_ldq-pal_base(r8)
- nop
-
- beq r9, dfault_do_bugcheck
- lda r9, pal_dtb_ldq-pal_base(r8)
-
- beq r9, dfault_do_bugcheck
-#endif
-
-//
-// KSP invalid halt case --
-ksp_inval_halt:
- DEBUGSTORE(76)
- bic r11, osfps_m_mode, r11 // set ps to kernel mode
- mtpr r0, pt0
-
- mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
- mtpr r31, ips
-
- mtpr r14, exc_addr // Set PC to instruction that caused trouble
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-
- lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
- br r31, sys_enter_console // enter the console
-
- ALIGN_BRANCH
-dfault_do_bugcheck:
- bis r10, r31, r14 // bugcheck expects exc_addr in r14
- br r31, pal_pal_bug_check
-
-
- ALIGN_BLOCK
-//+
-// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
-// On entry -
-// r14 - exc_addr
-// VA is locked
-//
-//-
-dfault_fetch_ldr31_err:
- mtpr r11, ev5__dtb_cm
- mtpr r11, ev5__ps // Make sure ps hasn't changed
-
- mfpr r31, va // unlock the mbox
- addq r14, 4, r14 // inc the pc to skip the fetch
-
- mtpr r14, exc_addr // give ibox new PC
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei
-
-
-
- ALIGN_BLOCK
-//+
-// sys_from_kern
-// callsys from kernel mode - OS bugcheck machine check
-//
-//-
-sys_from_kern:
- mfpr r14, exc_addr // PC points to call_pal
- subq r14, 4, r14
-
- lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
- br r31, pal_pal_mchk
-
-
-// .sbttl "Continuation of long call_pal flows"
- ALIGN_BLOCK
-//+
-// wrent_tbl
-// Table to write *int in paltemps.
-// 4 instructions/entry
-// r16 has new value
-//
-//-
-wrent_tbl:
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entint
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entarith
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entmm
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entif
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entuna
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entsys
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
- ALIGN_BLOCK
-//+
-// tbi_tbl
-// Table to do tbi instructions
-// 4 instructions per entry
-//-
-tbi_tbl:
- // -2 tbia
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_ia // Flush DTB
- mtpr r31, ev5__itb_ia // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
- // -1 tbiap
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_iap // Flush DTB
- mtpr r31, ev5__itb_iap // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
-
- // 0 unused
-//orig pvc_jsr tbi, dest=1
- hw_rei // Pad table
- nop
- nop
- nop
-
-
- // 1 tbisi
-//orig pvc_jsr tbi, dest=1
-#if icflush_on_tbix != 0
-
-
-
- nop
- br r31, pal_ic_flush_and_tbisi // Flush Icache
- nop
- nop // Pad table
-#else
-
- nop
- nop
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- // 2 tbisd
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB.
- nop
-
- nop
- hw_rei_stall
-
-
- // 3 tbis
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
-#else
- br r31, tbi_finish
- ALIGN_BRANCH
-tbi_finish:
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- ALIGN_BLOCK
-//+
-// bpt_bchk_common:
-// Finish up the bpt/bchk instructions
-//-
-bpt_bchk_common:
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
- ALIGN_BLOCK
-//+
-// rti_to_user
-// Finish up the rti instruction
-//-
-rti_to_user:
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mfpr r30, pt_usp
- hw_rei_spe // and back
-
-
- ALIGN_BLOCK
-//+
-// rti_to_kern
-// Finish up the rti instruction
-//-
-rti_to_kern:
- and r12, osfps_m_ipl, r11 // clean ps
- mfpr r12, pt_intmask // get int mask
-
- extbl r12, r11, r12 // get mask for this ipl
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mtpr r12, ev5__ipl // set the new ipl.
- or r25, r31, sp // sp
-
-// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
- hw_rei
-
- ALIGN_BLOCK
-//+
-// swpctx_cont
-// Finish up the swpctx instruction
-//-
-
-swpctx_cont:
-#if ev5_p1 != 0
-
-
- bic r25, r24, r25 // clean icsr<FPE>
- get_impure r8 // get impure pointer
-
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
- fix_impure_ipr r8 // adjust impure pointer
-
- restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
- srl r23, 32, r24 // move asn to low asn pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- sll r24, itb_asn_v_asn, r12
-
-#else
-
- bic r25, r24, r25 // clean icsr<FPE,PMP>
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- srl r23, 32, r24 // move asn to low asn pos
-
- and r22, 1, r22
- sll r24, itb_asn_v_asn, r12
-
- sll r22, icsr_v_pmp, r22
- nop
-
- or r25, r22, r25 // icsr with new pme
-#endif
-
- sll r24, dtb_asn_v_asn, r24
-
- subl r23, r13, r13 // gen new cc offset
- mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
-
- mtpr r24, dtb_asn // Load up new ASN
- mtpr r25, icsr // write the icsr
-
- sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
- ldqp r25, osfpcb_q_usp(r16) // get new usp
-
- insll r13, 4, r13 // >> 32
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r14, pt_ptbr // load the new ptbr
-
- mtpr r13, cc // set new offset
- ldqp r30, osfpcb_q_ksp(r16) // get new ksp
-
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r25, pt_usp // save usp
-
-#if ev5_p1 != 0
-
-
- blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
-
- // otherwise, monitoring select processes - update pm
- lda r25, 0x3F(r31)
- cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
-
- sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
- mfpr r22, ev5__pmctr
-
- and r8, r25, r8 // mask new ctl value
- bic r22, r25, r22 // clear ctl field in pmctr
-
- or r8, r22, r8
- mtpr r8, ev5__pmctr
-
-no_pm_change:
-#endif
-
-
-#if osf_chm_fix != 0
-
-
- p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
-
-#if build_fixed_image != 0
-
-
- hw_rei_stall
-#else
-
- mfpr r9, pt_pcbb // get FEN
-#endif
-
- ldqp r9, osfpcb_q_fen(r9)
- blbc r9, no_pm_change_10_ // skip if FEN disabled
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31)
- mtpr r12, dc_mode // turn dcache on so we can flush it
- nop // force correct slotting
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
-
- lda r8, 0(r31) // flood the dcache with junk data
-no_pm_change_5_: ldqp r31, 0(r8)
- lda r8, 0x20(r8) // touch each cache block
- srl r8, 13, r9
- blbc r9, no_pm_change_5_
-
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn the dcache back off
- nop // force correct slotting
- mfpr r31, pt0 // no hw_rei_stall in 0,1
-#endif
-
-
-no_pm_change_10_: hw_rei_stall // back we go
-
- ALIGN_BLOCK
-//+
-// swppal_cont - finish up the swppal call_pal
-//-
-
-swppal_cont:
- mfpr r2, pt_misc // get misc bits
- sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
- or r2, r0, r2 // set the bit
- mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
- mtpr r2, pt_misc // update the chip
-
- or r3, r31, r4
- mfpr r3, pt_impure // pass pointer to the impure area in r3
-//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
-//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
-//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
-//orig unfix_impure_ipr r3 // restore impure pointer
- lda r3, CNS_Q_IPR(r3)
- RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
- RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
- lda r3, -CNS_Q_IPR(r3)
-
- or r31, r31, r0 // set status to success
-// pvc_violate 1007
- jmp r31, (r4) // and call our friend, it's her problem now
-
-
-swppal_fail:
- addq r0, 1, r0 // set unknown pal or not loaded
- hw_rei // and return
-
-
-// .sbttl "Memory management"
-
- ALIGN_BLOCK
-//+
-//foe_ipte_handler
-// IFOE detected on level 3 pte, sort out FOE vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV vs FOE. Build stack and dispatch
-// Will not be here if TNV.
-//-
-
-foe_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- lda r17, mmcsr_c_acv(r31) // assume ACV
-
- stq r16, osfsf_pc(sp) // save pc
- cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
- ALIGN_BLOCK
-//+
-//invalid_ipte_handler
-// TNV detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch.
-//-
-
-invalid_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- and r25, 1, r17 // Isolate kre
-
- stq r16, osfsf_pc(sp) // save pc
- xor r17, 1, r17 // map to acv/tnv as a1
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
-
-
-
- ALIGN_BLOCK
-//+
-//invalid_dpte_handler
-// INVALID detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R10 = va
-// R8 = pte
-// R9 = mm_stat
-// PT6 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch
-//-
-
-
-invalid_dpte_handler:
- mfpr r12, pt6
- blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
-
- bis r12, r31, r14 // save PC in case of tbmiss or fault
- srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
-
- mtpr r11, pt0 // Save PS for stack write
- and r25, mm_stat_m_opcode, r25 // isolate opcode
-
- cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
- blbs r25, nmiss_fetch_ldr31_err // yes
-
- //dismiss exception if load to r31/f31
- blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
-
- and r25, 0x1F, r25 // isolate rnum
- nop
-
- cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
- bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
-
-invalid_dpte_no_dismiss:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r25 // Save va in case TBmiss on stack
- and r9, 1, r13 // save r/w flag
-
- stq r16, osfsf_a0(sp) // a0
- or r25, r31, r16 // pass va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // assume acv
-
- srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
- stq r29, osfsf_gp(sp)
-
- stq r18, osfsf_a2(sp) // a2
- cmovlbs r13, r25, r12 // if write access move acv based on write enable
-
- or r13, r31, r18 // pass flag of dstream access and read vs write
- mfpr r25, pt0 // get ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r13, pt_entmm // get entry point
-
- stq r25, osfsf_ps(sp) // save ps
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
-
- hw_rei_spe // out to exec
-
-//+
-//
-// We come here if we are erring on a dtb_miss, and the instr is a
-// fetch, fetch_m, of load to r31/f31.
-// The PC is incremented, and we return to the program.
-// essentially ignoring the instruction and error.
-//
-//-
- ALIGN_BLOCK
-nmiss_fetch_ldr31_err:
- mfpr r12, pt6
- addq r12, 4, r12 // bump pc to pc+4
-
- mtpr r12, exc_addr // and set entry point
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei //
-
- ALIGN_BLOCK
-//+
-// double_pte_inv
-// We had a single tbmiss which turned into a double tbmiss which found
-// an invalid PTE. Return to single miss with a fake pte, and the invalid
-// single miss flow will report the error.
-//
-// on entry:
-// r21 PTE
-// r22 available
-// VA IPR locked with original fault VA
-// pt4 saved r21
-// pt5 saved r22
-// pt6 original exc_addr
-//
-// on return to tbmiss flow:
-// r8 fake PTE
-//
-//
-//-
-double_pte_inv:
- srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
- mfpr r22, exc_addr // get the pc
-
- lda r22, 4(r22) // inc the pc
- lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
-
- cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
- mtpr r22, exc_addr // set for rei
-
- mfpr r21, pt4 // restore regs
- mfpr r22, pt5 // restore regs
-
- hw_rei // back to tb miss
-
- ALIGN_BLOCK
-//+
-//tnv_in_pal
-// The only places in pal that ld or store are the
-// stack builders, rti or retsys. Any of these mean we
-// need to take a ksp not valid halt.
-//
-//-
-tnv_in_pal:
-
-
- br r31, ksp_inval_halt
-
-
-// .sbttl "Icache flush routines"
-
- ALIGN_BLOCK
-//+
-// Common Icache flush routine.
-//
-//
-//-
-pal_ic_flush:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
- nop
- nop
-
-one_cycle_and_hw_rei:
- nop
- nop
-
- hw_rei_stall
-
-#if icflush_on_tbix != 0
-
-
- ALIGN_BLOCK
-
-//+
-// Common Icache flush and ITB invalidate single routine.
-// ITBIS and hw_rei_stall must be in same octaword.
-// r17 - has address to invalidate
-//
-//-
-PAL_IC_FLUSH_AND_TBISI:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
-
- nop
- nop
-
- nop
- nop
-
- // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
- // 44 nops plus 4 instructions before it is 48 instructions.
- // Since this routine started on a 32-byte (8 instruction) boundary,
- // the following 2 instructions will be in the same octword as required.
-// ALIGN_BRANCH
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-
-#endif
-
- ALIGN_BLOCK
-//+
-//osfpal_calpal_opcdec
-// Here for all opcdec CALL_PALs
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
-osfpal_calpal_opcdec:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- nop
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-osfpal_calpal_opcdec_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- nop
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r17, osfsf_a1(sp) // a1
-
- stq r14, osfsf_pc(sp) // save pc
- nop
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
-
-
-
-//+
-//pal_update_pcb
-// Update the PCB with the current SP, AST, and CC info
-//
-// r0 - return linkage
-//-
- ALIGN_BLOCK
-
-pal_update_pcb:
- mfpr r12, pt_pcbb // get pcbb
- and r11, osfps_m_mode, r25 // get mode
- beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
- mtpr r30, pt_usp // save user stack
- stqp r30, osfpcb_q_usp(r12) // store usp
- br r31, pal_update_pcb_20_ // join common
-pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
-pal_update_pcb_20_: rpcc r13 // get cyccounter
- srl r13, 32, r14 // move offset
- addl r13, r14, r14 // merge for new time
- stlp r14, osfpcb_l_cc(r12) // save time
-
-//orig pvc_jsr updpcb, bsr=1, dest=1
- ret r31, (r0)
-
-
-
-#if remove_save_state == 0
-
-// .sbttl "PAL_SAVE_STATE"
-//+
-//
-// Pal_save_state
-//
-// Function
-// All chip state saved, all PT's, SR's FR's, IPR's
-//
-//
-// Regs' on entry...
-//
-// R0 = halt code
-// pt0 = r0
-// R1 = pointer to impure
-// pt4 = r1
-// R3 = return addr
-// pt5 = r3
-//
-// register usage:
-// r0 = halt_code
-// r1 = addr of impure area
-// r3 = return_address
-// r4 = scratch
-//
-//-
-
-
- ALIGN_BLOCK
- .globl pal_save_state
-pal_save_state:
-//
-//
-// start of implementation independent save routine
-//
-// the impure area is larger than the addressibility of hw_ld and hw_st
-// therefore, we need to play some games: The impure area
-// is informally divided into the "machine independent" part and the
-// "machine dependent" part. The state that will be saved in the
-// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
-// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
-// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
-// macros will automagically adjust the offset correctly.
-//
-
-// The distributed code is commented out and followed by corresponding SRC code.
-// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
-
-//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
-//orig store_reg1 hlt, r0, r1, ipr=1
- SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
-
- mfpr r0, pt0 // get r0 back //orig
-//orig store_reg1 0, r0, r1 // save r0
- SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
-
- mfpr r0, pt4 // get r1 back //orig
-//orig store_reg1 1, r0, r1 // save r1
- SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
-
-//orig store_reg 2 // save r2
- SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
-
- mfpr r0, pt5 // get r3 back //orig
-//orig store_reg1 3, r0, r1 // save r3
- SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
-
- // reason code has been saved
- // r0 has been saved
- // r1 has been saved
- // r2 has been saved
- // r3 has been saved
- // pt0, pt4, pt5 have been lost
-
- //
- // Get out of shadow mode
- //
-
- mfpr r2, icsr // Get icsr //orig
-//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r0, (1<<(icsr_v_sde-16))(r31)
- bic r2, r0, r0 // ICSR with SDE clear //orig
- mtpr r0, icsr // Turn off SDE //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-
- // save integer regs R4-r31
-//orig #define t 4
-//orig .repeat 28
-//orig store_reg \t
-//orig #define t t + 1
-//orig .endr
- SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
- SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
- SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
- SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
- SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
- SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
- SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
- SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
- SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
- SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
- SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
- SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
- SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
- SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
- SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
- SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
- SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
- // save all paltemp regs except pt0
-
-//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
-//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
-//orig #define t 1
-//orig .repeat 23
-//orig store_reg \t , pal=1
-//orig #define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore the impure base address.
- lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
- SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
- SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
- SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
- SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
- SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
- SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
- SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
- SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
- SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
- SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
- SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
- SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
- SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
- SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
- SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
- SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
- SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
- SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
- SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
- SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
- // Restore shadow mode
- mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
- mfpr r31, pt0 //orig
- mtpr r2, icsr // Restore original ICSR //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
- // save all integer shadow regs
-
-//orig #define t 8
-//orig .repeat 7
-//orig store_reg \t, shadow=1
-//orig #define t t + 1
-//orig .endr
-//orig store_reg 25, shadow=1
-
- SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
-
-//orig store_reg exc_addr, ipr=1 // save ipr
-//orig store_reg pal_base, ipr=1 // save ipr
-//orig store_reg mm_stat, ipr=1 // save ipr
-//orig store_reg va, ipr=1 // save ipr
-//orig store_reg icsr, ipr=1 // save ipr
-//orig store_reg ipl, ipr=1 // save ipr
-//orig store_reg ps, ipr=1 // save ipr
-//orig store_reg itb_asn, ipr=1 // save ipr
-//orig store_reg aster, ipr=1 // save ipr
-//orig store_reg astrr, ipr=1 // save ipr
-//orig store_reg sirr, ipr=1 // save ipr
-//orig store_reg isr, ipr=1 // save ipr
-//orig store_reg ivptbr, ipr=1 // save ipr
-//orig store_reg mcsr, ipr=1 // save ipr
-//orig store_reg dc_mode, ipr=1 // save ipr
-
- SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
- SAVE_IPR(va,CNS_Q_VA,r1)
- SAVE_IPR(icsr,CNS_Q_ICSR,r1)
- SAVE_IPR(ipl,CNS_Q_IPL,r1)
- SAVE_IPR(ips,CNS_Q_IPS,r1)
- SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- SAVE_IPR(aster,CNS_Q_ASTER,r1)
- SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
- SAVE_IPR(sirr,CNS_Q_SIRR,r1)
- SAVE_IPR(isr,CNS_Q_ISR,r1)
- SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
- SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
-//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
-//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
-//orig // PVC violation applies only to
-pvc$osf35$379: // loads. HW_ST ok here, so ignore
- SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
-
-
- //the following iprs are informational only -- will not be restored
-
-//orig store_reg icperr_stat, ipr=1
-//orig store_reg pmctr, ipr=1
-//orig store_reg intid, ipr=1
-//orig store_reg exc_sum, ipr=1
-//orig store_reg exc_mask, ipr=1
-//orig ldah r14, 0xfff0(r31)
-//orig zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig nop // pad mf dcperr_stat out of shadow of last store
-//orig nop
-//orig nop
-//orig store_reg dcperr_stat, ipr=1
-
- SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
- SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
- SAVE_IPR(intId,CNS_Q_INT_ID,r1)
- SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
- SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
- ldah r14, 0xFFF0(zero)
- zap r14, 0xE0, r14 // Get base address of CBOX IPRs
- NOP // Pad mfpr dcPerr out of shadow of
- NOP // last store
- NOP
- SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
-
- // read cbox ipr state
-
-//orig mb
-//orig ldqp r2, ev5__sc_ctl(r14)
-//orig ldqp r13, ld_lock(r14)
-//orig ldqp r4, ev5__sc_addr(r14)
-//orig ldqp r5, ev5__ei_addr(r14)
-//orig ldqp r6, ev5__bc_tag_addr(r14)
-//orig ldqp r7, ev5__fill_syn(r14)
-//orig bis r5, r4, r31
-//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
-//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
-//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
-//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
-//orig mb
-
-#ifndef SIMOS
- mb
- ldq_p r2, scCtl(r14)
- ldq_p r13, ldLock(r14)
- ldq_p r4, scAddr(r14)
- ldq_p r5, eiAddr(r14)
- ldq_p r6, bcTagAddr(r14)
- ldq_p r7, fillSyn(r14)
- bis r5, r4, zero // Make sure all loads complete before
- bis r7, r6, zero // reading registers that unlock them.
- ldq_p r8, scStat(r14) // Unlocks scAddr.
- ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
- ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
- mb
-#endif
-//orig // save cbox ipr state
-//orig store_reg1 sc_ctl, r2, r1, ipr=1
-//orig store_reg1 ld_lock, r13, r1, ipr=1
-//orig store_reg1 sc_addr, r4, r1, ipr=1
-//orig store_reg1 ei_addr, r5, r1, ipr=1
-//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
-//orig store_reg1 fill_syn, r7, r1, ipr=1
-//orig store_reg1 sc_stat, r8, r1, ipr=1
-//orig store_reg1 ei_stat, r9, r1, ipr=1
-//orig //bc_config? sl_rcv?
-
- SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
- SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
- SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
- SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
- SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
- SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
- SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
- SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
-
-// restore impure base //orig
-//orig unfix_impure_ipr r1
- lda r1, -CNS_Q_IPR(r1)
-
-// save all floating regs //orig
- mfpr r0, icsr // get icsr //orig
- or r31, 1, r2 // get a one //orig
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
- sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
- or r2, r0, r0 // set FEN on //orig
- mtpr r0, icsr // write to icsr, enabling FEN //orig
-
-// map the save area virtually
-// orig mtpr r31, dtb_ia // clear the dtb
-// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-// orig sll r0, 32, r0 // shift to PFN field
-// orig lda r2, 0xff(r31) // all read enable and write enable bits set
-// orig sll r2, 8, r2 // move to PTE location
-// orig addq r0, r2, r0 // combine with PFN
-// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-// orig mtpr r1, dtb_tag // write TB tag
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too - in case the impure area crosses a page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag
-
- lda r4, (1<<va_s_off)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
- sll r31, 0, r31 // stall cycle 1 // orig
- sll r31, 0, r31 // stall cycle 2 // orig
- sll r31, 0, r31 // stall cycle 3 // orig
- nop // orig
-
-//orig // add offset for saving fpr regs
-//orig fix_impure_gpr r1
-
- lda r1, 0x200(r1) // Point to center of CPU segment
-
-// now save the regs - F0-F31
-
-//orig #define t 0
-//orig .repeat 32
-//orig store_reg \t , fpu=1
-//orig #define t t + 1
-//orig .endr
-
- mf_fpcr f0 // original
-
- SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
- SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
- SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
- SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
- SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
- SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
- SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
- SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
- SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
- SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
- SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
- SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
- SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
- SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
- SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
- SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
- SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
- SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
- SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
- SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
- SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig //switch impure offset from gpr to ipr---
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig store_reg1 fpcsr, f0, r1, fpcsr=1
-
- SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
- lda r1, -0x200(r1) // Restore the impure base address
-
-//orig // and back to gpr ---
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-
-//orig lda r0, cns_mchksize(r31) // get size of mchk area
-//orig store_reg1 mchkflag, r0, r1, ipr=1
-//orig mb
-
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
- // save this using the IPR base (it is closer) not the GRP base as they used...pb
- lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
- SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
- mb
-
-//orig or r31, 1, r0 // get a one
-//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
-//orig mb
-
- lda r1, -CNS_Q_IPR(r1) // back to the base
- lda r1, 0x200(r1) // Point to center of CPU segment
- or r31, 1, r0 // get a one
- SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
- mb
-
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
- lda r1, -0x200(r1) // Point to center of CPU segment
-
- mtpr r31, dtb_ia // clear the dtb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr savsta, bsr=1, dest=1
- ret r31, (r3) // and back we go
-#endif
-
-
-#if remove_restore_state == 0
-
-
-// .sbttl "PAL_RESTORE_STATE"
-//+
-//
-// Pal_restore_state
-//
-//
-// register usage:
-// r1 = addr of impure area
-// r3 = return_address
-// all other regs are scratchable, as they are about to
-// be reloaded from ram.
-//
-// Function:
-// All chip state restored, all SRs, FRs, PTs, IPRs
-// *** except R1, R3, PT0, PT4, PT5 ***
-//
-//-
- ALIGN_BLOCK
-pal_restore_state:
-
-//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
-
-//orig // map the console io area virtually
-//orig mtpr r31, dtb_ia // clear the dtb
-//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r1, dtb_tag // write TB tag
-//orig
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too, in case impure area crosses page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
-
- lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
-//orig // save all floating regs
-//orig mfpr r0, icsr // get icsr
-//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
-//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
-//orig or r2, r0, r0 // set FEN on
-//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
-
- mfpr r0, icsr // Get current ICSR
- bis zero, 1, r2 // Get a '1'
- or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
- sll r2, icsr_v_fpe, r2 // Shift bits into position
- bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
- mtpr r0, icsr // Update the chip
-
- mfpr r31, pt0 // FPE bubble cycle 1 //orig
- mfpr r31, pt0 // FPE bubble cycle 2 //orig
- mfpr r31, pt0 // FPE bubble cycle 3 //orig
-
-//orig fix_impure_ipr r1
-//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
-//orig mt_fpcr f0
-//orig
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
-//orig
-//orig // restore all floating regs
-//orig#define t 0
-//orig .repeat 32
-//orig restore_reg \t , fpu=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, 200(r1) // Point to base of IPR area again
- RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
- mt_fpcr f0 // original
-
- lda r1, 0x200(r1) // point to center of CPU segment
- RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
- RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
- RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
- RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
- RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
- RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
- RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
- RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
- RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
- RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
- RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
- RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
- RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
- RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
- RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
- RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
- RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
- RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
- RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
- RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
- RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig
-//orig // restore all pal regs
-//orig#define t 1
-//orig .repeat 23
-//orig restore_reg \t , pal=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore base address of impure area.
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
- RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
- RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
- RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
- RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
- RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
- RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
- RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
- RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
- RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
- RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
- RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
- RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
- RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
- RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
- RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
- RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
- RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
- RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
- RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
- RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
-
-//orig restore_reg exc_addr, ipr=1 // restore ipr
-//orig restore_reg pal_base, ipr=1 // restore ipr
-//orig restore_reg ipl, ipr=1 // restore ipr
-//orig restore_reg ps, ipr=1 // restore ipr
-//orig mtpr r0, dtb_cm // set current mode in mbox too
-//orig restore_reg itb_asn, ipr=1
-//orig srl r0, itb_asn_v_asn, r0
-//orig sll r0, dtb_asn_v_asn, r0
-//orig mtpr r0, dtb_asn // set ASN in Mbox too
-//orig restore_reg ivptbr, ipr=1
-//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
-//orig restore_reg mcsr, ipr=1
-//orig restore_reg aster, ipr=1
-//orig restore_reg astrr, ipr=1
-//orig restore_reg sirr, ipr=1
-//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
-//orig mfpr r31, pt0 // (may issue with mt maf_mode)
-//orig mfpr r31, pt0 // bubble cycle 1
-//orig mfpr r31, pt0 // bubble cycle 2
-//orig mfpr r31, pt0 // bubble cycle 3
-//orig mfpr r31, pt0 // (may issue with following ld)
-
- // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
- RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- RESTORE_IPR(ipl,CNS_Q_IPL,r1)
- RESTORE_IPR(ips,CNS_Q_IPS,r1)
- mtpr r0, dtbCm // Set Mbox current mode too.
- RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- srl r0, 4, r0
- sll r0, 57, r0
- mtpr r0, dtbAsn // Set Mbox ASN too
- RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- mtpr r0, mVptBr // Set Mbox VptBr too
- RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
- RESTORE_IPR(aster,CNS_Q_ASTER,r1)
- RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
- RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
- RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
- STALL
- STALL
- STALL
- STALL
- STALL
-
-
- // restore all integer shadow regs
-//orig#define t 8
-//orig .repeat 7
-//orig restore_reg \t, shadow=1
-//orig#define t t + 1
-//orig .endr
-//orig restore_reg 25, shadow=1
-//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
-
- RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
- RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
- //
- // Get out of shadow mode
- //
-
- mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
- mfpr r31, pt0 // "" //orig
- mfpr r0, icsr // Get icsr //orig
-//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
- bic r0, r2, r2 // ICSR with SDE clear //orig
- mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-//orig // switch impure pointer from ipr to gpr area --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig // restore all integer regs
-//orig#define t 4
-//orig .repeat 28
-//orig restore_reg \t
-//orig#define t t + 1
-//orig .endr
-
-// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
-
- lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-
- RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
- RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
- RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
- RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
- RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
- RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
- RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
- RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
- RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
- RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
- RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
- RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
- RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
- RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
- RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
- RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
- RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
-
- lda t0, -0x200(t0) // Restore base address of impure area.
- lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
- RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
-
-//orig // and back again --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
-//orig mb
-
- lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
- lda t0, 0x200(t0) // and back to center of CPU segment
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
- mb
-
-//orig // and back we go
-//orig// restore_reg 3
-//orig restore_reg 2
-//orig// restore_reg 1
-//orig restore_reg 0
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
-
- RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
- RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
- lda r1, -0x200(r1) // Restore impure base address
-
- mfpr r31, pt0 // stall for ldqp above //orig
-
- mtpr r31, dtb_ia // clear the tb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr rststa, bsr=1, dest=1
- ret r31, (r3) // back we go //orig
-#endif
-
-
-//+
-// pal_pal_bug_check -- code has found a bugcheck situation.
-// Set things up and join common machine check flow.
-//
-// Input:
-// r14 - exc_addr
-//
-// On exit:
-// pt0 - saved r0
-// pt1 - saved r1
-// pt4 - saved r4
-// pt5 - saved r5
-// pt6 - saved r6
-// pt10 - saved exc_addr
-// pt_misc<47:32> - mchk code
-// pt_misc<31:16> - scb vector
-// r14 - base of Cbox IPRs in IO space
-// MCES<mchk> is set
-//-
-
- ALIGN_BLOCK
- .globl pal_pal_bug_check_from_int
-pal_pal_bug_check_from_int:
- DEBUGSTORE(0x79)
-//simos DEBUG_EXC_ADDR()
- DEBUGSTORE(0x20)
-//simos bsr r25, put_hex
- lda r25, mchk_c_bugcheck(r31)
- addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
- br r31, pal_pal_mchk
- nop
-
-pal_pal_bug_check:
- lda r25, mchk_c_bugcheck(r31)
-
-pal_pal_mchk:
- sll r25, 32, r25 // Move mchk code to position
-
- mtpr r14, pt10 // Stash exc_addr
- mtpr r14, exc_addr
-
- mfpr r12, pt_misc // Get MCES and scratch
- zap r12, 0x3c, r12
-
- or r12, r25, r12 // Combine mchk code
- lda r25, scb_v_procmchk(r31) // Get SCB vector
-
- sll r25, 16, r25 // Move SCBv to position
- or r12, r25, r25 // Combine SCBv
-
- mtpr r0, pt0 // Stash for scratch
- bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
-
- mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
- ldah r14, 0xfff0(r31)
-
- mtpr r1, pt1 // Stash for scratch
- zap r14, 0xE0, r14 // Get Cbox IPR base
-
- mtpr r4, pt4
- mtpr r5, pt5
-
- mtpr r6, pt6
- blbs r12, sys_double_machine_check // MCHK halt if double machine check
-
- br r31, sys_mchk_collect_iprs // Join common machine check flow
-
-// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
-
-// .sbttl "HALT - PALcode for HALT instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// GO to console code
-//
-//-
-
- .text 1
-// . = 0x2000
- CALL_PAL_PRIV(PAL_HALT_ENTRY)
-call_pal_halt:
-#if rax_mode == 0
- mfpr r31, pt0 // Pad exc_addr read
- mfpr r31, pt0
-
- mfpr r12, exc_addr // get PC
- subq r12, 4, r12 // Point to the HALT
-
- mtpr r12, exc_addr
- mtpr r0, pt0
-
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
- lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
- br r31, sys_enter_console // enter the console
-
-#else // RAX mode
- mb
- mb
- mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
- mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
- mtpr r8, exc_addr // no HW_REI for 1 cycle.
- blbc r9, not_begin_case
- mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
- mtpr r31, ev5__itb_ia // clear ITB.
-
-not_begin_case:
- nop
- nop
-
- nop
- nop // pad mt itb_asn ->hw_rei_stall
-
- hw_rei_stall
-#endif
-
-// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// R16 - contains the PFN of the page to be flushed
-//
-// Function:
-// Flush all Dstream caches of 1 entire page
-// The CFLUSH routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
-Call_Pal_Cflush:
- br r31, sys_cflush
-
-// .sbttl "DRAINA - PALcode for DRAINA instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Implicit TRAPB performed by hardware.
-//
-// Function:
-// Stall instruction issue until all prior instructions are guaranteed to
-// complete without incurring aborts. For the EV5 implementation, this
-// means waiting until all pending DREADS are returned.
-//
-//-
-
- CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
-Call_Pal_Draina:
- ldah r14, 0x100(r31) // Init counter. Value?
- nop
-
-DRAINA_LOOP:
- subq r14, 1, r14 // Decrement counter
- mfpr r13, ev5__maf_mode // Fetch status bit
-
- srl r13, maf_mode_v_dread_pending, r13
- ble r14, DRAINA_LOOP_TOO_LONG
-
- nop
- blbs r13, DRAINA_LOOP // Wait until all DREADS clear
-
- hw_rei
-
-DRAINA_LOOP_TOO_LONG:
- br r31, call_pal_halt
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0003)
-CallPal_OpcDec03:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0004)
-CallPal_OpcDec04:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0005)
-CallPal_OpcDec05:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0006)
-CallPal_OpcDec06:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0007)
-CallPal_OpcDec07:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0008)
-CallPal_OpcDec08:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "CSERVE- PALcode for CSERVE instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Various functions for private use of console software
-//
-// option selector in r0
-// arguments in r16....
-// The CSERVE routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
-Call_Pal_Cserve:
- br r31, sys_cserve
-
-// .sbttl "swppal - PALcode for swppal instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Vectored into via hardware PALcode instruction dispatch.
-// R16 contains the new PAL identifier
-// R17:R21 contain implementation-specific entry parameters
-//
-// R0 receives status:
-// 0 success (PAL was switched)
-// 1 unknown PAL variant
-// 2 known PAL variant, but PAL not loaded
-//
-//
-// Function:
-// Swap control to another PAL.
-//-
-
- CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
-Call_Pal_Swppal:
- cmpule r16, 255, r0 // see if a kibble was passed
- cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
-
- or r16, r31, r3 // set r3 incase this is a address
- blbc r0, swppal_cont // nope, try it as an address
-
- cmpeq r16, 2, r0 // is it our friend OSF?
- blbc r0, swppal_fail // nope, don't know this fellow
-
- br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
-
-// .global osfpal_hw_entry_reset
-// .weak osfpal_hw_entry_reset
-// .long <osfpal_hw_entry_reset-pal_start>
-//orig halt // don't know how to get the address here - kludge ok, load pal at 0
- .long 0 // ?? hack upon hack...pb
-
-CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
-// ble r3, swppal_fail ; if OSF not linked in say not loaded.
- mfpr r2, pal_base // fetch pal base
-
- addq r2, r3, r3 // add pal base
- lda r2, 0x3FFF(r31) // get pal base checker mask
-
- and r3, r2, r2 // any funky bits set?
- cmpeq r2, 0, r0 //
-
- blbc r0, swppal_fail // return unknown if bad bit set.
- br r31, swppal_cont
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000B)
-CallPal_OpcDec0B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000C)
-CallPal_OpcDec0C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wripir- PALcode for wripir instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// r16 = processor number to interrupt
-//
-// Function:
-// IPIR <- R16
-// Handled in system-specific code
-//
-// Exit:
-// interprocessor interrupt is recorded on the target processor
-// and is initiated when the proper enabling conditions are present.
-//-
-
- CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
-Call_Pal_Wrpir:
- br r31, sys_wripir
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000E)
-CallPal_OpcDec0E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000F)
-CallPal_OpcDec0F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdmces- PALcode for rdmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// R0 <- ZEXT(MCES)
-//-
-
- CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
-Call_Pal_Rdmces:
- mfpr r0, pt_mces // Read from PALtemp
- and r0, mces_m_all, r0 // Clear other bits
-
- hw_rei
-
-// .sbttl "wrmces- PALcode for wrmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
-// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
-// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
-// MCES<3> <- R16<3> (DPC)
-// MCES<4> <- R16<4> (DSC)
-//
-//-
-
- CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
-Call_Pal_Wrmces:
- and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
- mfpr r14, pt_mces // Get current value
-
- ornot r31, r13, r13 // Flip all the bits
- and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
-
- and r14, r13, r1 // Update MCHK, SCE, PCE
- bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
-
- or r1, r17, r1 // Update DPC and DSC
- mtpr r1, pt_mces // Write MCES back
-
-#if rawhide_system == 0
- nop // Pad to fix PT write->read restriction
-#else
- blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
-#endif
-
- nop
- hw_rei
-
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0012)
-CallPal_OpcDec12:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0013)
-CallPal_OpcDec13:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0014)
-CallPal_OpcDec14:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0015)
-CallPal_OpcDec15:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0016)
-CallPal_OpcDec16:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0017)
-CallPal_OpcDec17:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0018)
-CallPal_OpcDec18:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0019)
-CallPal_OpcDec19:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001A)
-CallPal_OpcDec1A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001B)
-CallPal_OpcDec1B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001C)
-CallPal_OpcDec1C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001D)
-CallPal_OpcDec1D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001E)
-CallPal_OpcDec1E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001F)
-CallPal_OpcDec1F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0020)
-CallPal_OpcDec20:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0021)
-CallPal_OpcDec21:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0022)
-CallPal_OpcDec22:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0023)
-CallPal_OpcDec23:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0024)
-CallPal_OpcDec24:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0025)
-CallPal_OpcDec25:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0026)
-CallPal_OpcDec26:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0027)
-CallPal_OpcDec27:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0028)
-CallPal_OpcDec28:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0029)
-CallPal_OpcDec29:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002A)
-CallPal_OpcDec2A:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrfen - PALcode for wrfen instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// a0<0> -> ICSR<FPE>
-// Store new FEN in PCB
-// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
-//
-// Issue: What about pending FP loads when FEN goes from on->off????
-//-
-
- CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
-Call_Pal_Wrfen:
- or r31, 1, r13 // Get a one
- mfpr r1, ev5__icsr // Get current FPE
-
- sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
- and r16, 1, r16 // clean new fen
-
- sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
- bic r1, r13, r1 // zero icsr<fpe>
-
- or r1, r12, r1 // Or new FEN into ICSR
- mfpr r12, pt_pcbb // Get PCBB - E1
-
- mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
- stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
-
- mfpr r31, pt0 // Pad ICSR<FPE> write.
- mfpr r31, pt0
-
- mfpr r31, pt0
-// pvc_violate 225 // cuz PVC can't distinguish which bits changed
- hw_rei
-
-
- CALL_PAL_PRIV(0x002C)
-CallPal_OpcDec2C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// vptptr <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
-Call_Pal_Wrvptptr:
- mtpr r16, ev5__mvptbr // Load Mbox copy
- mtpr r16, ev5__ivptbr // Load Ibox copy
- nop // Pad IPR write
- nop
- hw_rei
-
- CALL_PAL_PRIV(0x002E)
-CallPal_OpcDec2E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002F)
-CallPal_OpcDec2F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "swpctx- PALcode for swpctx instruction"
-
-//+
-//
-// Entry:
-// hardware dispatch via callPal instruction
-// R16 -> new pcb
-//
-// Function:
-// dynamic state moved to old pcb
-// new state loaded from new pcb
-// pcbb pointer set
-// old pcbb returned in R0
-//
-// Note: need to add perf monitor stuff
-//-
-
- CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
-Call_Pal_Swpctx:
- rpcc r13 // get cyccounter
- mfpr r0, pt_pcbb // get pcbb
-
- ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
- ldqp r23, osfpcb_l_cc(r16) // get new asn
-
- srl r13, 32, r25 // move offset
- mfpr r24, pt_usp // get usp
-
- stqp r30, osfpcb_q_ksp(r0) // store old ksp
-// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
- mtpr r16, pt_pcbb // set new pcbb
-
- stqp r24, osfpcb_q_usp(r0) // store usp
- addl r13, r25, r25 // merge for new time
-
- stlp r25, osfpcb_l_cc(r0) // save time
- ldah r24, (1<<(icsr_v_fpe-16))(r31)
-
- and r22, 1, r12 // isolate fen
- mfpr r25, icsr // get current icsr
-
- ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
- br r31, swpctx_cont
-
-// .sbttl "wrval - PALcode for wrval instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// sysvalue <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
-Call_Pal_Wrval:
- nop
- mtpr r16, pt_sysval // Pad paltemp write
- nop
- nop
- hw_rei
-
-
-// .sbttl "rdval - PALcode for rdval instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- sysvalue
-//-
-
- CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
-Call_Pal_Rdval:
- nop
- mfpr r0, pt_sysval
- nop
- hw_rei
-
-// .sbttl "tbi - PALcode for tbi instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// TB invalidate
-// r16/a0 = TBI type
-// r17/a1 = Va for TBISx instructions
-//-
-
- CALL_PAL_PRIV(PAL_TBI_ENTRY)
-Call_Pal_Tbi:
- addq r16, 2, r16 // change range to 0-2
- br r23, CALL_PAL_tbi_10_ // get our address
-
-CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
- lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
- sll r16, 4, r16 // * 16
- blbc r22, CALL_PAL_tbi_30_ // go rei, if not
-
- addq r23, r16, r23 // addr of our code
-//orig pvc_jsr tbi
- jmp r31, (r23) // and go do it
-
-CALL_PAL_tbi_30_:
- hw_rei
- nop
-
-// .sbttl "wrent - PALcode for wrent instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Update ent* in paltemps
-// r16/a0 = Address of entry routine
-// r17/a1 = Entry Number 0..5
-//
-// r22, r23 trashed
-//-
-
- CALL_PAL_PRIV(PAL_WRENT_ENTRY)
-Call_Pal_Wrent:
- cmpult r17, 6, r22 // see if in range
- br r23, CALL_PAL_wrent_10_ // get our address
-
-CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
- blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
-
- lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
- sll r17, 4, r17 // *16
-
- addq r17, r23, r23 // Get address in table
-//orig pvc_jsr wrent
- jmp r31, (r23) // and go do it
-
-CALL_PAL_wrent_30_:
- hw_rei // out of range, just return
-
-// .sbttl "swpipl - PALcode for swpipl instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- PS<IPL>
-// PS<IPL> <- a0<2:0> (r16)
-//
-// t8 (r22) is scratch
-//-
-
- CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
-Call_Pal_Swpipl:
- and r16, osfps_m_ipl, r16 // clean New ipl
- mfpr r22, pt_intmask // get int mask
-
- extbl r22, r16, r22 // get mask for this ipl
- bis r11, r31, r0 // return old ipl
-
- bis r16, r31, r11 // set new ps
- mtpr r22, ev5__ipl // set new mask
-
- mfpr r31, pt0 // pad ipl write
- mfpr r31, pt0 // pad ipl write
-
- hw_rei // back
-
-// .sbttl "rdps - PALcode for rdps instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- ps
-//-
-
- CALL_PAL_PRIV(PAL_RDPS_ENTRY)
-Call_Pal_Rdps:
- bis r11, r31, r0 // Fetch PALshadow PS
- nop // Must be 2 cycles long
- hw_rei
-
-// .sbttl "wrkgp - PALcode for wrkgp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// kgp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
-Call_Pal_Wrkgp:
- nop
- mtpr r16, pt_kgp
- nop // Pad for pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrusp - PALcode for wrusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// usp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
-Call_Pal_Wrusp:
- nop
- mtpr r16, pt_usp
- nop // Pad possible pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-//
-// Function:
-// Various control functions for the onchip performance counters
-//
-// option selector in r16
-// option argument in r17
-// returned status in r0
-//
-//
-// r16 = 0 Disable performance monitoring for one or more cpu's
-// r17 = 0 disable no counters
-// r17 = bitmask disable counters specified in bit mask (1=disable)
-//
-// r16 = 1 Enable performance monitoring for one or more cpu's
-// r17 = 0 enable no counters
-// r17 = bitmask enable counters specified in bit mask (1=enable)
-//
-// r16 = 2 Mux select for one or more cpu's
-// r17 = Mux selection (cpu specific)
-// <24:19> bc_ctl<pm_mux_sel> field (see spec)
-// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
-//
-// r16 = 3 Options
-// r17 = (cpu specific)
-// <0> = 0 log all processes
-// <0> = 1 log only selected processes
-// <30,9,8> mode select - ku,kp,kk
-//
-// r16 = 4 Interrupt frequency select
-// r17 = (cpu specific) indicates interrupt frequencies desired for each
-// counter, with "zero interrupts" being an option
-// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
-//
-// r16 = 5 Read Counters
-// r17 = na
-// r0 = value (same format as ev5 pmctr)
-// <0> = 0 Read failed
-// <0> = 1 Read succeeded
-//
-// r16 = 6 Write Counters
-// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
-//
-// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
-// r17 = 0 enable no counters
-// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
-//
-//=============================================================================
-//Assumptions:
-//PMCTR_CTL:
-//
-// <15:14> CTL0 -- encoded frequency select and enable - CTR0
-// <13:12> CTL1 -- " - CTR1
-// <11:10> CTL2 -- " - CTR2
-//
-// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
-// <7:6> FRQ1 -- frequency select for CTR1
-// <5:4> FRQ2 -- frequency select for CTR2
-//
-// <0> all vs. select processes (0=all,1=select)
-//
-// where
-// FRQx<1:0>
-// 0 1 disable interrupt
-// 1 0 frequency = 65536 (16384 for ctr2)
-// 1 1 frequency = 256
-// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
-//
-//=============================================================================
-//
- CALL_PAL_PRIV(0x0039)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_Wrperfmon:
-#if perfmon_debug == 0
- // "real" performance monitoring code
- cmpeq r16, 1, r0 // check for enable
- bne r0, perfmon_en // br if requested to enable
-
- cmpeq r16, 2, r0 // check for mux ctl
- bne r0, perfmon_muxctl // br if request to set mux controls
-
- cmpeq r16, 3, r0 // check for options
- bne r0, perfmon_ctl // br if request to set options
-
- cmpeq r16, 4, r0 // check for interrupt frequency select
- bne r0, perfmon_freq // br if request to change frequency select
-
- cmpeq r16, 5, r0 // check for counter read request
- bne r0, perfmon_rd // br if request to read counters
-
- cmpeq r16, 6, r0 // check for counter write request
- bne r0, perfmon_wr // br if request to write counters
-
- cmpeq r16, 7, r0 // check for counter clear/enable request
- bne r0, perfmon_enclr // br if request to clear/enable counters
-
- beq r16, perfmon_dis // br if requested to disable (r16=0)
- br r31, perfmon_unknown // br if unknown request
-#else
-
- br r31, pal_perfmon_debug
-#endif
-
-// .sbttl "rdusp - PALcode for rdusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- usp
-//-
-
- CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
-Call_Pal_Rdusp:
- nop
- mfpr r0, pt_usp
- hw_rei
-
-
- CALL_PAL_PRIV(0x003B)
-CallPal_OpcDec3B:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "whami - PALcode for whami instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- whami
-//-
- CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
-Call_Pal_Whami:
- nop
- mfpr r0, pt_whami // Get Whami
- extbl r0, 1, r0 // Isolate just whami bits
- hw_rei
-
-// .sbttl "retsys - PALcode for retsys instruction"
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// 00(sp) contains return pc
-// 08(sp) contains r29
-//
-// Function:
-// Return from system call.
-// mode switched from kern to user.
-// stacks swapped, ugp, upc restored.
-// r23, r25 junked
-//-
-
- CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
-Call_Pal_Retsys:
- lda r25, osfsf_c_size(sp) // pop stack
- bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
-
- mfpr r14, exc_addr // save exc_addr in case of fault
- ldq r23, osfsf_pc(sp) // get pc
-
- ldq r29, osfsf_gp(sp) // get gp
- stl_c r31, -4(sp) // clear lock_flag
-
- lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
- mfpr r30, pt_usp // get users stack
-
- bic r23, 3, r23 // clean return pc
- mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
-
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
- mtpr r25, pt_ksp // save kern stack
-
- rc r31 // clear inter_flag
-// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
- hw_rei_spe // and back
-
-
- CALL_PAL_PRIV(0x003E)
-CallPal_OpcDec3E:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rti - PALcode for rti instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// 00(sp) -> ps
-// 08(sp) -> pc
-// 16(sp) -> r29 (gp)
-// 24(sp) -> r16 (a0)
-// 32(sp) -> r17 (a1)
-// 40(sp) -> r18 (a3)
-//-
-
- CALL_PAL_PRIV(PAL_RTI_ENTRY)
-#ifdef SIMOS
- /* called once by platform_tlaser */
- .globl Call_Pal_Rti
-#endif
-Call_Pal_Rti:
- lda r25, osfsf_c_size(sp) // get updated sp
- bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
-
- mfpr r14, exc_addr // save PC in case of fault
- rc r31 // clear intr_flag
-
- ldq r12, -6*8(r25) // get ps
- ldq r13, -5*8(r25) // pc
-
- ldq r18, -1*8(r25) // a2
- ldq r17, -2*8(r25) // a1
-
- ldq r16, -3*8(r25) // a0
- ldq r29, -4*8(r25) // gp
-
- bic r13, 3, r13 // clean return pc
- stl_c r31, -4(r25) // clear lock_flag
-
- and r12, osfps_m_mode, r11 // get mode
- mtpr r13, exc_addr // set return address
-
- beq r11, rti_to_kern // br if rti to Kern
- br r31, rti_to_user // out of call_pal space
-
-
-// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
-// .sbttl "bpt- PALcode for bpt instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- .text 1
-// . = 0x3000
- CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
-Call_Pal_Bpt:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bpt_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bpt, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "bugchk- PALcode for bugchk instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
-Call_Pal_Bugchk:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bugchk_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bugchk, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
- CALL_PAL_UNPRIV(0x0082)
-CallPal_OpcDec82:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "callsys - PALcode for callsys instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Switch mode to kernel and build a callsys stack frame.
-// sp = ksp
-// gp = kgp
-// t8 - t10 (r22-r24) trashed
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
-Call_Pal_Callsys:
-
- and r11, osfps_m_mode, r24 // get mode
- mfpr r22, pt_ksp // get ksp
-
- beq r24, sys_from_kern // sysCall from kern is not allowed
- mfpr r12, pt_entsys // get address of callSys routine
-
-//+
-// from here on we know we are in user going to Kern
-//-
- mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- bis r31, r31, r11 // PS=0 (mode=kern)
- mfpr r23, exc_addr // get pc
-
- mtpr r30, pt_usp // save usp
- lda sp, 0-osfsf_c_size(r22)// set new sp
-
- stq r29, osfsf_gp(sp) // save user gp/r29
- stq r24, osfsf_ps(sp) // save ps
-
- stq r23, osfsf_pc(sp) // save pc
- mtpr r12, exc_addr // set address
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kern gp/r29
-
- hw_rei_spe // and off we go!
-
-
- CALL_PAL_UNPRIV(0x0084)
-CallPal_OpcDec84:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0085)
-CallPal_OpcDec85:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "imb - PALcode for imb instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Flush the writebuffer and flush the Icache
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
-Call_Pal_Imb:
- mb // Clear the writebuffer
- mfpr r31, ev5__mcsr // Sync with clear
- nop
- nop
- br r31, pal_ic_flush // Flush Icache
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x0087)
-CallPal_OpcDec87:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0088)
-CallPal_OpcDec88:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0089)
-CallPal_OpcDec89:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008A)
-CallPal_OpcDec8A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008B)
-CallPal_OpcDec8B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008C)
-CallPal_OpcDec8C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008D)
-CallPal_OpcDec8D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008E)
-CallPal_OpcDec8E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008F)
-CallPal_OpcDec8F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0090)
-CallPal_OpcDec90:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0091)
-CallPal_OpcDec91:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0092)
-CallPal_OpcDec92:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0093)
-CallPal_OpcDec93:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0094)
-CallPal_OpcDec94:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0095)
-CallPal_OpcDec95:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0096)
-CallPal_OpcDec96:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0097)
-CallPal_OpcDec97:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0098)
-CallPal_OpcDec98:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0099)
-CallPal_OpcDec99:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009A)
-CallPal_OpcDec9A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009B)
-CallPal_OpcDec9B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009C)
-CallPal_OpcDec9C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009D)
-CallPal_OpcDec9D:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdunique - PALcode for rdunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- unique
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
-CALL_PALrdunique_:
- mfpr r0, pt_pcbb // get pcb pointer
- ldqp r0, osfpcb_q_unique(r0) // get new value
-
- hw_rei
-
-// .sbttl "wrunique - PALcode for wrunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// unique <- a0 (r16)
-//
-//-
-//
-CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
-CALL_PAL_Wrunique:
- nop
- mfpr r12, pt_pcbb // get pcb pointer
- stqp r16, osfpcb_q_unique(r12)// get new value
- nop // Pad palshadow write
- hw_rei // back
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00A0)
-CallPal_OpcDecA0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A1)
-CallPal_OpcDecA1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A2)
-CallPal_OpcDecA2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A3)
-CallPal_OpcDecA3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A4)
-CallPal_OpcDecA4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A5)
-CallPal_OpcDecA5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A6)
-CallPal_OpcDecA6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A7)
-CallPal_OpcDecA7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A8)
-CallPal_OpcDecA8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A9)
-CallPal_OpcDecA9:
- br r31, osfpal_calpal_opcdec
-
-
-// .sbttl "gentrap - PALcode for gentrap instruction"
-//+
-// CALL_PAL_gentrap:
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- CALL_PAL_UNPRIV(0x00AA)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_gentrap:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_gentrap_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_gentrap, r16// set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00AB)
-CallPal_OpcDecAB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AC)
-CallPal_OpcDecAC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AD)
-CallPal_OpcDecAD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AE)
-CallPal_OpcDecAE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AF)
-CallPal_OpcDecAF:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B0)
-CallPal_OpcDecB0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B1)
-CallPal_OpcDecB1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B2)
-CallPal_OpcDecB2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B3)
-CallPal_OpcDecB3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B4)
-CallPal_OpcDecB4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B5)
-CallPal_OpcDecB5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B6)
-CallPal_OpcDecB6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B7)
-CallPal_OpcDecB7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B8)
-CallPal_OpcDecB8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B9)
-CallPal_OpcDecB9:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BA)
-CallPal_OpcDecBA:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BB)
-CallPal_OpcDecBB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BC)
-CallPal_OpcDecBC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BD)
-CallPal_OpcDecBD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BE)
-CallPal_OpcDecBE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BF)
-CallPal_OpcDecBF:
- // MODIFIED BY EGH 2/25/04
- br r31, copypal_impl
-
-
-/*======================================================================*/
-/* OSF/1 CALL_PAL CONTINUATION AREA */
-/*======================================================================*/
-
- .text 2
-
- . = 0x4000
-
-
-// .sbttl "Continuation of MTPR_PERFMON"
- ALIGN_BLOCK
-#if perfmon_debug == 0
- // "real" performance monitoring code
-// mux ctl
-perfmon_muxctl:
- lda r8, 1(r31) // get a 1
- sll r8, pmctr_v_sel0, r8 // move to sel0 position
- or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
- and r17, r8, r25 // isolate pmctr mux select bits
- mfpr r0, ev5__pmctr
- bic r0, r8, r0 // clear old mux select bits
- or r0,r25, r25 // or in new mux select bits
- mtpr r25, ev5__pmctr
-
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, bc_ctl_v_pm_mux_sel, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
- br r31, perfmon_success
-
-
-// requested to disable perf monitoring
-perfmon_dis:
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
-perfmon_dis_ctr0: // and begin with ctr0
- blbc r17, perfmon_dis_ctr1 // do not disable ctr0
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl0, r8
- bic r14, r8, r14 // disable ctr0
-perfmon_dis_ctr1:
- srl r17, 1, r17
- blbc r17, perfmon_dis_ctr2 // do not disable ctr1
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl1, r8
- bic r14, r8, r14 // disable ctr1
-perfmon_dis_ctr2:
- srl r17, 1, r17
- blbc r17, perfmon_dis_update // do not disable ctr2
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl2, r8
- bic r14, r8, r14 // disable ctr2
-perfmon_dis_update:
- mtpr r14, ev5__pmctr // update pmctr ipr
-//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
-// adapted from ev5_pal_macros.mar
-//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
-
- lda r17, 0x3F(r31) // build mask
- sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
- and r14, r17, r14 // isolate ctl bits
- bic r8, r17, r8 // clear out old ctl bits
- or r14, r8, r14 // create shadow ctl bits
-//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
-//adjusted impure pointer still in r25
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
-
- br r31, perfmon_success
-
-
-// requested to enable perf monitoring
-//;the following code can be greatly simplified for pass2, but should work fine as is.
-
-
-perfmon_enclr:
- lda r9, 1(r31) // set enclr flag
- br perfmon_en_cont
-
-perfmon_en:
- bis r31, r31, r9 // clear enclr flag
-
-perfmon_en_cont:
- mfpr r8, pt_pcbb // get PCB base
-//orig get_pmctr_ctl r25, r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
-
- ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
- srl r16, osfpcb_v_pme, r16 // get pme bit
- mfpr r13, icsr
- and r16, 1, r16 // isolate pme bit
-
- // this code only needed in pass2 and later
-//orig sget_addr r12, 1<<icsr_v_pmp, r31
- lda r12, 1<<icsr_v_pmp(r31) // pb
- bic r13, r12, r13 // clear pmp bit
- sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
- or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
- ev5_pass2 mtpr r13, icsr // update icsr
-
-#if ev5_p1 != 0
- lda r12, 1(r31)
- cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
-#else
- bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
-#endif
-
- sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
- bis r14, r31, r13 // copy pmctr
-
-perfmon_en_ctr0: // and begin with ctr0
- blbc r17, perfmon_en_ctr1 // do not enable ctr0
-
- blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr0<15:0> mask
- sll r8, pmctr_v_ctr0, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr0:
-//orig get_addr r8, 3<<pmctr_v_ctl0, r31
- LDLI(r8, (3<<pmctr_v_ctl0))
- and r25, r8, r12 //isolate frequency select bits for ctr0
- bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl0 bits
-
-perfmon_en_ctr1: // enable ctr1
- srl r17, 1, r17 // get ctr1 enable
- blbc r17, perfmon_en_ctr2 // do not enable ctr1
-
- blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr1<15:0> mask
- sll r8, pmctr_v_ctr1, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr1:
-//orig get_addr r8, 3<<pmctr_v_ctl1, r31
- LDLI(r8, (3<<pmctr_v_ctl1))
- and r25, r8, r12 //isolate frequency select bits for ctr1
- bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl1 bits
-
-perfmon_en_ctr2: // enable ctr2
- srl r17, 1, r17 // get ctr2 enable
- blbc r17, perfmon_en_return // do not enable ctr2 - return
-
- blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr2:
-//orig get_addr r8, 3<<pmctr_v_ctl2, r31
- LDLI(r8, (3<<pmctr_v_ctl2))
- and r25, r8, r12 //isolate frequency select bits for ctr2
- bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl2 bits
-
-perfmon_en_return:
- cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
- // else only do the counter clears
- mtpr r13, ev5__pmctr // update pmctr ipr
-
-//;this code not needed for pass2 and later, but does not hurt to leave it in
- lda r8, 0x3F(r31)
-//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
-
- sll r8, pmctr_v_ctl2, r8 // build ctl mask
- and r8, r14, r14 // isolate new ctl bits
- bic r25, r8, r25 // clear out old ctl value
- or r25, r14, r14 // create new pmctr_ctl
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-
-// options...
-perfmon_ctl:
-
-// set mode
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
-//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
- LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
- mfpr r0, ev5__pmctr
- and r17, r8, r25 // isolate pmctr mode bits
- bic r0, r8, r0 // clear old mode bits
- or r0, r25, r25 // or in new mode bits
- mtpr r25, ev5__pmctr
-
-//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
- mfpr r8, icsr
- lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
- bic r8, r25, r8 // clear old pma bit
- cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
- or r8, r25, r8
- ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
- mfpr r31, pt0 // pad icsr write
- mfpr r31, pt0 // pad icsr write
-
-//;the following code not needed for pass2 and later, but should work anyway.
- bis r14, 1, r14 // set for select processes
- blbs r17, perfmon_sp // branch if select processes
- bic r14, 1, r14 // all processes
-perfmon_sp:
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
- br r31, perfmon_success
-
-// counter frequency select
-perfmon_freq:
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
- lda r8, 0x3F(r31)
-//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
-// I guess this should be a shift of 4 bits from the above control register structure .. pb
-#define pmctr_ctl_v_frq2_SHIFT 4
- sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
-
- and r8, r17, r17
- bic r14, r8, r14 // clear out old frequency select bits
-
- or r17, r14, r14 // or in new frequency select info
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-// read counters
-perfmon_rd:
- mfpr r0, ev5__pmctr
- or r0, 1, r0 // or in return status
- hw_rei // back to user
-
-// write counters
-perfmon_wr:
- mfpr r14, ev5__pmctr
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
-
-//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
- LDLI(r9, (0xFFFFFFFF))
- sll r9, pmctr_v_ctr1, r9
- or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
- bic r14, r8, r14 // clear ctr fields
- and r17, r8, r25 // clear all but ctr fields
- or r25, r14, r14 // write ctr fields
- mtpr r14, ev5__pmctr // update pmctr ipr
-
- mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
-
-perfmon_success:
- or r31, 1, r0 // set success
- hw_rei // back to user
-
-perfmon_unknown:
- or r31, r31, r0 // set fail
- hw_rei // back to user
-
-#else
-
-// end of "real code", start of debug code
-
-//+
-// Debug environment:
-// (in pass2, always set icsr<pma> to ensure master counter enable is on)
-// R16 = 0 Write to on-chip performance monitor ipr
-// r17 = on-chip ipr
-// r0 = return value of read of on-chip performance monitor ipr
-// R16 = 1 Setup Cbox mux selects
-// r17 = Cbox mux selects in same position as in bc_ctl ipr.
-// r0 = return value of read of on-chip performance monitor ipr
-//
-//-
-pal_perfmon_debug:
- mfpr r8, icsr
- lda r9, 1<<icsr_v_pma(r31)
- bis r8, r9, r8
- mtpr r8, icsr
-
- mfpr r0, ev5__pmctr // read old value
- bne r16, cbox_mux_sel
-
- mtpr r17, ev5__pmctr // update pmctr ipr
- br r31, end_pm
-
-cbox_mux_sel:
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, BC_CTL_V_PM_MUX_SEL, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
-end_pm: hw_rei
-
-#endif
-
-
-//;The following code is a workaround for a cpu bug where Istream prefetches to
-//;super-page address space in user mode may escape off-chip.
-#if spe_fix != 0
-
- ALIGN_BLOCK
-hw_rei_update_spe:
- mfpr r12, pt_misc // get previous mode
- srl r11, osfps_v_mode, r10 // isolate current mode bit
- and r10, 1, r10
- extbl r12, 7, r8 // get previous mode field
- and r8, 1, r8 // isolate previous mode bit
- cmpeq r10, r8, r8 // compare previous and current modes
- beq r8, hw_rei_update_spe_5_
- hw_rei // if same, just return
-
-hw_rei_update_spe_5_:
-
-#if fill_err_hack != 0
-
- fill_error_hack
-#endif
-
- mfpr r8, icsr // get current icsr value
- ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
- bic r8, r9, r8 // disable spe
- xor r10, 1, r9 // flip mode for new spe bit
- sll r9, icsr_v_spe+1, r9 // shift into position
- bis r8, r9, r8 // enable/disable spe
- lda r9, 1(r31) // now update our flag
- sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
- bic r12, r9, r12 // clear saved previous mode
- sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
- bis r12, r9, r12 // set saved current mode
- mtpr r12, pt_misc // update pt_misc
- mtpr r8, icsr // update icsr
-
-#if osf_chm_fix != 0
-
-
- blbc r10, hw_rei_update_spe_10_ // branch if not user mode
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
- mtpr r12, dc_mode // Turn on dcache
- mtpr r31, dc_flush // and flush it
- br r31, pal_ic_flush
-
-hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
- ldqp r9, osfpcb_q_Fen(r9) // get FEN
- blbc r9, pal_ic_flush // return if FP disabled
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn off dcache
-#endif
-
-
- br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
-#endif
-
-
-copypal_impl:
- mov r16, r0
- and r16, 63, r8
- and r17, 63, r9
- bis r8, r9, r8
- bne r8, cache_copy_done
- bic r18, 63, r8
- and r18, 63, r18
- beq r8, cache_copy_done
- cache_loop:
- ldf f17, 0(r16)
- stf f17, 0(r16)
- addq r17, 64, r17
- addq r16, 64, r16
- subq r8, 64, r8
- bne r8, cache_loop
-cache_copy_done:
- ble r18, finished #if len <=0 we are finished
- ldq_u r8, 0(r17)
- xor r17, r16, r9
- and r9, 7, r9
- and r16, 7, r10
- bne r9, unaligned
- beq r10, aligned
- ldq_u r9, 0(r16)
- addq r18, r10, r18
- mskqh r8, r17, r8
- mskql r9, r17, r9
- bis r8, r9, r8
-aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, aligned_done
-loop:
- stq_u r8, 0(r16)
- ldq_u r8, 8(r17)
- subq r10, 8, r10
- lda r16,8(r16)
- lda r17,8(r17)
- bne r10, loop
-aligned_done:
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
- few_left:
- mskql r8, r18, r10
- ldq_u r9, 0(r16)
- mskqh r9, r18, r9
- bis r10, r9, r10
- stq_u r10, 0(r16)
- br r31, finished
-unaligned:
- addq r17, r18, r25
- cmpule r18, 8, r9
- bne r9, unaligned_few_left
- beq r10, unaligned_dest_aligned
- and r16, 7, r10
- subq r31, r10, r10
- addq r10, 8, r10
- ldq_u r9, 7(r17)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r12
- insql r12, r16, r12
- ldq_u r13, 0(r16)
- mskql r13, r16, r13
- bis r12, r13, r12
- stq_u r12, 0(r16)
- addq r16, r10, r16
- addq r17, r10, r17
- subq r18, r10, r18
- ldq_u r8, 0(r17)
-unaligned_dest_aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, unaligned_partial_left
-unaligned_loop:
- ldq_u r9, 7(r17)
- lda r17, 8(r17)
- extql r8, r17, r12
- extqh r9, r17, r13
- subq r10, 8, r10
- bis r12, r13, r13
- stq r13, 0(r16)
- lda r16, 8(r16)
- beq r10, unaligned_second_partial_left
- ldq_u r8, 7(r17)
- lda r17, 8(r17)
- extql r9, r17, r12
- extqh r8, r17, r13
- bis r12, r13, r13
- subq r10, 8, r10
- stq r13, 0(r16)
- lda r16, 8(r16)
- bne r10, unaligned_loop
-unaligned_partial_left:
- mov r8, r9
-unaligned_second_partial_left:
- ldq_u r8, -1(r25)
- extql r9, r17, r9
- extqh r8, r17, r8
- bis r8, r9, r8
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
-unaligned_few_left:
- ldq_u r9, -1(r25)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r8
- insqh r8, r16, r9
- insql r8, r16, r8
- lda r12, -1(r31)
- mskql r12, r18, r13
- cmovne r13, r13, r12
- insqh r12, r16, r13
- insql r12, r16, r12
- addq r16, r18, r10
- ldq_u r14, 0(r16)
- ldq_u r25, -1(r10)
- bic r14, r12, r14
- bic r25, r13, r25
- and r8, r12, r8
- and r9, r13, r9
- bis r8, r14, r8
- bis r9, r25, r9
- stq_u r9, -1(r10)
- stq_u r8, 0(r16)
-finished:
- hw_rei
diff --git a/system/alpha/palcode/osfpal_cache_copy_unaligned.S b/system/alpha/palcode/osfpal_cache_copy_unaligned.S
new file mode 100644
index 000000000..e8ac423c1
--- /dev/null
+++ b/system/alpha/palcode/osfpal_cache_copy_unaligned.S
@@ -0,0 +1,5253 @@
+// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
+// since we don't have a mechanism to expand the data structures.... pb Nov/95
+
+// build_fixed_image: not sure what means
+// real_mm to be replaced during rewrite
+// remove_save_state remove_restore_state can be remooved to save space ??
+
+
+#include "ev5_defs.h"
+#include "ev5_impure.h"
+#include "ev5_alpha_defs.h"
+#include "ev5_paldef.h"
+#include "ev5_osfalpha_defs.h"
+#include "fromHudsonMacros.h"
+#include "fromHudsonOsf.h"
+#include "dc21164FromGasSources.h"
+
+#ifdef SIMOS
+#define DEBUGSTORE(c) nop
+#else
+#define DEBUGSTORE(c) \
+ lda r13, c(zero) ; \
+ bsr r25, debugstore
+#endif
+
+#define DEBUG_EXC_ADDR()\
+ bsr r25, put_exc_addr; \
+ DEBUGSTORE(13) ; \
+ DEBUGSTORE(10)
+
+#define egore 0
+#define acore 0
+#define beh_model 0
+#define ev5_p2 1
+#define ev5_p1 0
+#define ldvpte_bug_fix 1
+#define osf_chm_fix 0
+
+// Do we want to do this?? pb
+#define spe_fix 0
+// Do we want to do this?? pb
+#define build_fixed_image 0
+
+#define ev5_pass2
+#define enable_p4_fixups 0
+#define osf_svmin 1
+#define enable_physical_console 0
+#define fill_err_hack 0
+#define icflush_on_tbix 0
+#define max_cpuid 1
+#define perfmon_debug 0
+#define rawhide_system 0
+#define rax_mode 0
+
+
+// This is the fix for the user-mode super page references causing the machine to crash.
+#if (spe_fix == 1) && (build_fixed_image==1)
+#define hw_rei_spe br r31, hw_rei_update_spe
+#else
+#define hw_rei_spe hw_rei
+#endif
+
+
+// redefine a few of the distribution-code names to match the Hudson gas names.
+// opcodes
+#define ldqp ldq_p
+#define stqp stq_p
+#define ldlp ldl_p
+#define stlp stl_p
+
+#define r0 $0
+#define r1 $1
+#define r2 $2
+#define r3 $3
+#define r4 $4
+#define r5 $5
+#define r6 $6
+#define r7 $7
+#define r8 $8
+#define r9 $9
+#define r10 $10
+#define r11 $11
+#define r12 $12
+#define r13 $13
+#define r14 $14
+#define r15 $15
+#define r16 $16
+#define r17 $17
+#define r18 $18
+#define r19 $19
+#define r20 $20
+#define r21 $21
+#define r22 $22
+#define r23 $23
+#define r24 $24
+#define r25 $25
+#define r26 $26
+#define r27 $27
+#define r28 $28
+#define r29 $29
+#define r30 $30
+#define r31 $31
+
+// .title "EV5 OSF PAL"
+// .ident "V1.18"
+//
+//****************************************************************************
+//* *
+//* Copyright (c) 1992, 1993, 1994, 1995 *
+//* by DIGITAL Equipment Corporation, Maynard, Mass. *
+//* *
+//* This software is furnished under a license and may be used and copied *
+//* only in accordance with the terms of such license and with the *
+//* inclusion of the above copyright notice. This software or any other *
+//* copies thereof may not be provided or otherwise made available to any *
+//* other person. No title to and ownership of the software is hereby *
+//* transferred. *
+//* *
+//* The information in this software is subject to change without notice *
+//* and should not be construed as a commitment by DIGITAL Equipment *
+//* Corporation. *
+//* *
+//* DIGITAL assumes no responsibility for the use or reliability of its *
+//* software on equipment which is not supplied by DIGITAL. *
+//* *
+//****************************************************************************
+
+// .sbttl "Edit History"
+//+
+// Who Rev When What
+// ------------ --- ----------- --------------------------------
+// DB 0.0 03-Nov-1992 Start
+// DB 0.1 28-Dec-1992 add swpctx
+// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
+// DB 0.3 11-Jan-1993 rearrange trap entry points
+// DB 0.4 01-Feb-1993 add tbi
+// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
+// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
+// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
+// Bug: typo on register number for store in wrunique
+// Bug: rti to kern uses r16 as scratch
+// Bug: callsys saving wrong value in pt_usp
+// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
+// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
+// Bug: rti stl_c could corrupt the stack
+// Bug: unaligned returning wrong value in r17 (or should be and)
+// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
+// DB 0.11 23-Feb-1993 Turn caches on in reset flow
+// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
+// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
+// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
+// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
+// DB 0.16 12-May-1993 Update reset
+// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
+// Bug: in wrmces, not clearing DPC, DSC
+// Update swppal
+// Add pal bugchecks, pal_save_state, pal_restore_state
+// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
+// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
+// DB 0.18 26-May-1993 PVC fixes
+// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
+// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
+// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
+// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
+// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
+// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
+// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
+// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
+// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
+// JM 0.22 28-jul-1993 Add WRIPIR instruction
+// JM 0.23 05-aug-1993 Bump version number for release
+// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
+// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
+// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
+// and SWPCTX
+// JM 0.26 07-oct-1993 Re-implement pal_version
+// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
+// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
+// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
+// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
+// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
+// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
+// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
+// JM 0.33 24-nov-1993 save/restore_state -
+// BUG: use ivptbr to restore mvptbr
+// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
+// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
+// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
+// BUG: generate ksnv halt when tb miss on kernel stack accesses
+// save exc_addr in r14 for invalid_dpte stack builder
+// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
+// the same shadow
+// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
+// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
+// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
+// Hide impure area manipulations in macros
+// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
+// Add some pvc_violate statements
+// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
+// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
+// Add code to ensure fen bit set in icsr before ldt
+// conditionally compile rax_more_reset out.
+// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
+// move rax reset stuff to ev5_osf_system_pal.m64
+// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
+// and performance monitoring bits
+// Change to save_state routine to save more iprs.
+// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
+// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
+// remove_save_state,remove_restore_state;fix new pvc violation in save_state
+// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
+// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
+// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
+// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
+// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
+// Add exc_sum and exc_mask to pal_save_state (not restore)
+// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
+// area.
+// Add performance counter support to swpctx and wrperfmon
+// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
+// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
+// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
+// taken in the interrupt flow, stack is pushed twice.
+// SWPPAL - update to support ECO 59 to allow 0 as a valid address
+// Add itb flush to save/restore state routines
+// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
+// conforms to itbia restriction.
+// Added enable_physical_console flag (for enter/exit console routines only)
+// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
+// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
+// nmiss_fetch_err to nmiss_fetch_ldr31_err.
+// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
+// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
+// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
+// Moved perfmon code here from system file.
+// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
+// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
+// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
+// after ISR read, but we won't catch the ISR update. reverse order
+// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
+// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
+// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
+// DTBMISS_SINGLE if not in palmode.
+// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
+// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
+// superpage mode in User mode and re-enable in kernel mode.
+// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
+// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
+// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
+// cpu bug.
+// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
+// ES 1.13 17-mar-1995 Refine osf_chm_fix
+// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
+// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
+// Force pvc checking of exit_console
+// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
+// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
+// instead of xor to maintain previous mode in pt_misc
+// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
+// not have pme set. The bits in icsr maintain the master enable state.
+// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
+//
+#define vmaj 1
+#define vmin 18
+#define vms_pal 1
+#define osf_pal 2
+#define pal_type osf_pal
+#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
+//-
+
+// .sbttl "PALtemp register usage"
+
+//+
+// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
+// for these PALtemps:
+//
+// pt0 local scratch
+// pt1 local scratch
+// pt2 entUna pt_entUna
+// pt3 CPU specific impure area pointer pt_impure
+// pt4 memory management temp
+// pt5 memory management temp
+// pt6 memory management temp
+// pt7 entIF pt_entIF
+// pt8 intmask pt_intmask
+// pt9 entSys pt_entSys
+// pt10
+// pt11 entInt pt_entInt
+// pt12 entArith pt_entArith
+// pt13 reserved for system specific PAL
+// pt14 reserved for system specific PAL
+// pt15 reserved for system specific PAL
+// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
+// pt17 sysval pt_sysval
+// pt18 usp pt_usp
+// pt19 ksp pt_ksp
+// pt20 PTBR pt_ptbr
+// pt21 entMM pt_entMM
+// pt22 kgp pt_kgp
+// pt23 PCBB pt_pcbb
+//
+//-
+
+// .sbttl "PALshadow register usage"
+//
+//+
+//
+// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
+// This maps the OSF PAL usage of R8 - R14 and R25:
+//
+// r8 ITBmiss/DTBmiss scratch
+// r9 ITBmiss/DTBmiss scratch
+// r10 ITBmiss/DTBmiss scratch
+// r11 PS
+// r12 local scratch
+// r13 local scratch
+// r14 local scratch
+// r25 local scratch
+//
+//
+//-
+
+// .sbttl "ALPHA symbol definitions"
+// _OSF_PSDEF GLOBAL
+// _OSF_PTEDEF GLOBAL
+// _OSF_VADEF GLOBAL
+// _OSF_PCBDEF GLOBAL
+// _OSF_SFDEF GLOBAL
+// _OSF_MMCSR_DEF GLOBAL
+// _SCBDEF GLOBAL
+// _FRMDEF GLOBAL
+// _EXSDEF GLOBAL
+// _OSF_A0_DEF GLOBAL
+// _MCESDEF GLOBAL
+
+// .sbttl "EV5 symbol definitions"
+
+// _EV5DEF
+// _PALTEMP
+// _MM_STAT_DEF
+// _EV5_MM
+// _EV5_IPLDEF
+
+// _HALT_CODES GLOBAL
+// _MCHK_CODES GLOBAL
+
+// _PAL_IMPURE
+// _PAL_LOGOUT
+
+
+
+
+// .sbttl "PALcode configuration options"
+
+// There are a number of options that may be assembled into this version of
+// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
+// the following). The options that can be adjusted cause the resultant PALcode
+// to reflect the desired target system.
+
+
+#define osfpal 1 // This is the PALcode for OSF.
+
+#ifndef rawhide_system
+
+#define rawhide_system 0
+#endif
+
+
+#ifndef real_mm
+// Page table translation vs 1-1 mapping
+#define real_mm 1
+#endif
+
+
+#ifndef rax_mode
+
+#define rax_mode 0
+#endif
+
+#ifndef egore
+// End of reset flow starts a program at 200000(hex).
+#define egore 1
+#endif
+
+#ifndef acore
+// End of reset flow starts a program at 40000(hex).
+#define acore 0
+#endif
+
+
+// assume acore+egore+rax_mode lt 2 // Assertion checker
+
+#ifndef beh_model
+// EV5 behavioral model specific code
+#define beh_model 1
+#endif
+
+#ifndef init_cbox
+// Reset flow init of Bcache and Scache
+#define init_cbox 1
+#endif
+
+#ifndef disable_crd
+// Decides whether the reset flow will disable
+#define disable_crd 0
+#endif
+
+ // correctable read interrupts via ICSR
+#ifndef perfmon_debug
+#define perfmon_debug 0
+#endif
+
+#ifndef icflush_on_tbix
+#define icflush_on_tbix 0
+#endif
+
+#ifndef remove_restore_state
+#define remove_restore_state 0
+#endif
+
+#ifndef remove_save_state
+#define remove_save_state 0
+#endif
+
+#ifndef enable_physical_console
+#define enable_physical_console 0
+#endif
+
+#ifndef ev5_p1
+#define ev5_p1 0
+#endif
+
+#ifndef ev5_p2
+#define ev5_p2 1
+#endif
+
+// assume ev5_p1+ev5_p2 eq 1
+
+#ifndef ldvpte_bug_fix
+#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
+#endif
+
+#ifndef spe_fix
+// If set, disable super-page mode in user mode and re-enable
+#define spe_fix 0
+#endif
+ // in kernel. Workaround for cpu bug.
+#ifndef build_fixed_image
+#define build_fixed_image 0
+#endif
+
+
+#ifndef fill_err_hack
+// If set, disable fill_error mode in user mode and re-enable
+#define fill_err_hack 0
+#endif
+
+ // in kernel. Workaround for cpu bug.
+
+// .macro hw_rei_spe
+// .iif eq spe_fix, hw_rei
+//#if spe_fix != 0
+//
+//
+//#define hw_rei_chm_count hw_rei_chm_count + 1
+// p4_fixup_label \hw_rei_chm_count
+// .iif eq build_fixed_image, br r31, hw_rei_update_spe
+// .iif ne build_fixed_image, hw_rei
+//#endif
+//
+// .endm
+
+// Add flag "osf_chm_fix" to enable dcache in user mode only
+// to avoid cpu bug.
+
+#ifndef osf_chm_fix
+// If set, enable D-Cache in
+#define osf_chm_fix 0
+#endif
+
+#if osf_chm_fix != 0
+// user mode only.
+#define hw_rei_chm_count 0
+#endif
+
+#if osf_chm_fix != 0
+
+#define hw_rei_stall_chm_count 0
+#endif
+
+#ifndef enable_p4_fixups
+
+#define enable_p4_fixups 0
+#endif
+
+ // If set, do EV5 Pass 4 fixups
+#if spe_fix == 0
+
+#define osf_chm_fix 0
+#endif
+
+#if spe_fix == 0
+
+#define enable_p4_fixups 0
+#endif
+
+ // Only allow fixups if fix enabled
+
+ //Turn off fill_errors and MEM_NEM in user mode
+// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
+// //save r22,r23,r24
+// stqp r22, 0x150(r31) //add
+// stqp r23, 0x158(r31) //contents
+// stqp r24, 0x160(r31) //bit mask
+//
+// lda r22, 0x82(r31)
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
+// bis r23,r31,r23
+//
+// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
+// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L20_ // ELSE
+//L10_: bis r23, r24, r23 // clear fillerr_en bit
+//L20_: // ENDIF
+//
+// stlp r23, 0x80(r22) // write back the CIA_MASK register
+// mb
+// ldlp r23, 0x80(r22)
+// bis r23,r31,r23
+// mb
+//
+// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
+// ldah r22, 0x8740(r22)
+// sll r22, 8, r22
+// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
+// bis r23,r31,r23
+//
+//
+// lda r24, 0x400(r31) // r9 <- fillerr_en bit
+// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
+// bic r23, r24, r23 // set fillerr_en bit
+// br r31, L40_ // ELSE
+//L30_: bis r23, r24, r23 // clear fillerr_en bit
+//L40_: // ENDIF
+//
+// stlp r23, 0(r22) // write back the CIA_CTRL register
+// mb
+// ldlp r23, 0(r22)
+// bis r23,r31,r23
+// mb
+//
+// //restore r22,r23,r24
+// ldqp r22, 0x150(r31)
+// ldqp r23, 0x158(r31)
+// ldqp r24, 0x160(r31)
+//
+// .endm
+
+// multiprocessor support can be enabled for a max of n processors by
+// setting the following to the number of processors on the system.
+// Note that this is really the max cpuid.
+
+#ifndef max_cpuid
+#define max_cpuid 8
+#endif
+
+#ifndef osf_svmin // platform specific palcode version number
+#define osf_svmin 0
+#endif
+
+
+#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
+
+// .mcall ldqp // override macro64 definition with macro from library
+// .mcall stqp // override macro64 definition with macro from library
+
+
+// .psect _pal,mix
+// huh pb pal_base:
+// huh pb #define current_block_base . - pal_base
+
+// .sbttl "RESET - Reset Trap Entry Point"
+//+
+// RESET - offset 0000
+// Entry:
+// Vectored into via hardware trap on reset, or branched to
+// on swppal.
+//
+// r0 = whami
+// r1 = pal_base
+// r2 = base of scratch area
+// r3 = halt code
+//
+//
+// Function:
+//
+//-
+
+ .text 0
+ . = 0x0000
+ .globl Pal_Base
+Pal_Base:
+ HDW_VECTOR(PAL_RESET_ENTRY)
+Trap_Reset:
+ nop
+#ifdef SIMOS
+ /*
+ * store into r1
+ */
+ br r1,sys_reset
+#else
+ /* following is a srcmax change */
+
+ DEBUGSTORE(0x41)
+ /* The original code jumped using r1 as a linkage register to pass the base
+ of PALcode to the platform specific code. We use r1 to pass a parameter
+ from the SROM, so we hardcode the address of Pal_Base in platform.s
+ */
+ br r31, sys_reset
+#endif
+
+ // Specify PAL version info as a constant
+ // at a known location (reset + 8).
+
+ .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
+ .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
+ .long 0
+ .long 0
+pal_impure_start:
+ .quad 0
+pal_debug_ptr:
+ .quad 0 // reserved for debug pointer ; 20
+#if beh_model == 0
+
+
+#if enable_p4_fixups != 0
+
+
+ .quad 0
+ .long p4_fixup_hw_rei_fixup_table
+#endif
+
+#else
+
+ .quad 0 //
+ .quad 0 //0x0030
+ .quad 0
+ .quad 0 //0x0040
+ .quad 0
+ .quad 0 //0x0050
+ .quad 0
+ .quad 0 //0x0060
+ .quad 0
+pal_enter_cns_address:
+ .quad 0 //0x0070 -- address to jump to from enter_console
+ .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
+#endif
+
+
+
+
+// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
+
+//+
+// IACCVIO - offset 0080
+// Entry:
+// Vectored into via hardware trap on Istream access violation or sign check error on PC.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV)
+// a2 <- -1 (for ifetch fault)
+// vector via entMM
+//-
+
+ HDW_VECTOR(PAL_IACCVIO_ENTRY)
+Trap_Iaccvio:
+ DEBUGSTORE(0x42)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_IACCVIO_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bic r14, 3, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entmm // get entry point
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r16, osfsf_pc(sp) // save pc
+ stq r29, osfsf_gp(sp) // save gp
+
+ mtpr r13, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ subq r31, 1, r18 // pass flag of istream, as a2
+ hw_rei_spe
+
+
+// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
+
+//+
+// INTERRUPT - offset 0100
+// Entry:
+// Vectored into via trap on hardware interrupt
+//
+// Function:
+// check for halt interrupt
+// check for passive release (current ipl geq requestor)
+// if necessary, switch to kernel mode
+// push stack frame, update ps (including current mode and ipl copies), sp, and gp
+// pass the interrupt info to the system module
+//
+//-
+
+
+ HDW_VECTOR(PAL_INTERRUPT_ENTRY)
+Trap_Interrupt:
+ mfpr r13, ev5__intid // Fetch level of interruptor
+ mfpr r25, ev5__isr // Fetch interrupt summary register
+
+ srl r25, isr_v_hlt, r9 // Get HLT bit
+ mfpr r14, ev5__ipl
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
+ blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
+
+ cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
+ bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
+
+ and r11, osfps_m_mode, r10 // get mode bit
+ beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
+
+ mtpr r30, pt_usp // save user stack
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_INTERRUPT_10_:
+ lda sp, (0-osfsf_c_size)(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r11, osfsf_ps(sp) // save ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // push gp
+ stq r16, osfsf_a0(sp) // a0
+
+// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r18, osfsf_a2(sp) // a2
+ subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
+
+ srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
+ subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
+
+ cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
+ bis r12, r31, r11 // set new ps
+
+ mfpr r12, pt_intmask
+ and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
+
+#ifdef SIMOS
+ /*
+ * Lance had space problems. We don't.
+ */
+ extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+ mfpr r29, pt_kgp // update gp
+ mtpr r14, ev5__ipl // load the new IPL into Ibox
+#else
+// Moved the following three lines to sys_interrupt to make room for debug
+// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
+// mfpr r29, pt_kgp // update gp
+
+// mtpr r14, ev5__ipl // load the new IPL into Ibox
+#endif
+ br r31, sys_interrupt // Go handle interrupt
+
+
+
+// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
+
+//+
+// ITBMISS - offset 0180
+// Entry:
+// Vectored into via hardware trap on Istream translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//
+//-
+
+ HDW_VECTOR(PAL_ITB_MISS_ENTRY)
+Trap_Itbmiss:
+#if real_mm == 0
+
+
+ // Simple 1-1 va->pa mapping
+
+ nop // Pad to align to E1
+ mfpr r8, exc_addr
+
+ srl r8, page_offset_size_bits, r9
+ sll r9, 32, r9
+
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+ mtpr r9, itb_pte // E1
+
+ hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
+#else
+
+ // Real MM mapping
+ nop
+ mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
+
+ nop
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
+
+pal_itb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ mtpr r10, exc_addr // Restore exc_address if there was a trap.
+
+ mfpr r31, ev5__va // Unlock VA in case there was a double miss
+ nop
+
+ and r8, osfpte_m_foe, r25 // Look for FOE set.
+ blbc r8, invalid_ipte_handler // PTE not valid.
+
+ nop
+ bne r25, foe_ipte_handler // FOE is set
+
+ nop
+ mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
+
+ hw_rei_stall //
+
+#endif
+
+
+
+
+// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_SINGLE - offset 0200
+// Entry:
+// Vectored into via hardware trap on Dstream single translation buffer miss.
+//
+// Function:
+// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
+// Can trap into DTBMISS_DOUBLE.
+// This routine can use the PALshadow registers r8, r9, and r10
+//-
+
+ HDW_VECTOR(PAL_DTB_MISS_ENTRY)
+Trap_Dtbmiss_Single:
+#if real_mm == 0
+ // Simple 1-1 va->pa mapping
+ mfpr r8, va // E0
+ srl r8, page_offset_size_bits, r9
+
+ sll r9, 32, r9
+ lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
+
+ mtpr r9, dtb_pte // E0
+ nop // Pad to align to E0
+
+
+
+ mtpr r8, dtb_tag // E0
+ nop
+
+ nop // Pad tag write
+ nop
+
+ nop // Pad tag write
+ nop
+
+ hw_rei
+#else
+ mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
+ mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
+
+// DEBUGSTORE(0x45)
+// DEBUG_EXC_ADDR()
+ // Real MM mapping
+ mfpr r9, ev5__mm_stat // Get read/write bit. E0.
+ mtpr r10, pt6 // Stash exc_addr away
+
+pal_dtb_ldq:
+ ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
+ nop // Pad MF VA
+
+ mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
+ nop
+
+ mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
+ blbc r8, invalid_dpte_handler // Handle invalid PTE
+
+ mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
+ mfpr r10, pt6
+
+ // Following 2 instructions take 2 cycles
+ mtpr r10, exc_addr // Return linkage in case we trapped. E1.
+ mfpr r31, pt0 // Pad the write to dtb_tag
+
+ hw_rei // Done, return
+#endif
+
+
+
+
+// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
+
+//+
+// DTBMISS_DOUBLE - offset 0280
+// Entry:
+// Vectored into via hardware trap on Double TBmiss from single miss flows.
+//
+// r8 - faulting VA
+// r9 - original MMstat
+// r10 - original exc_addr (both itb,dtb miss)
+// pt6 - original exc_addr (dtb miss flow only)
+// VA IPR - locked with original faulting VA
+//
+// Function:
+// Get PTE, if valid load TB and return.
+// If not valid then take TNV/ACV exception.
+//
+// pt4 and pt5 are reserved for this flow.
+//
+//
+//-
+
+ HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
+Trap_Dtbmiss_double:
+#if ldvpte_bug_fix != 0
+ mtpr r8, pt4 // save r8 to do exc_addr check
+ mfpr r8, exc_addr
+ blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
+ mfpr r8, pt4 // restore r8
+#endif
+ nop
+ mtpr r22, pt5 // Get some scratch space. E1.
+ // Due to virtual scheme, we can skip the first lookup and go
+ // right to fetch of level 2 PTE
+ sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ mtpr r21, pt4 // Get some scratch space. E1.
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ mfpr r21, pt_ptbr // Get physical address of the page table.
+
+ nop
+ addq r21, r22, r21 // Index into page table for level 2 PTE.
+
+ sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
+ ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
+
+ srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
+ blbc r21, double_pte_inv // Check for Invalid PTE.
+
+ srl r21, 32, r21 // extract PFN from PTE
+ sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
+
+ addq r21, r22, r21 // Index into page table for level 3 PTE.
+ nop
+
+ ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
+ blbc r21, double_pte_inv // Check for invalid PTE.
+
+ mtpr r21, ev5__dtb_pte // Write the PTE. E0.
+ mfpr r22, pt5 // Restore scratch register
+
+ mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
+ mfpr r21, pt4 // Restore scratch register
+
+ nop // Pad write to tag.
+ nop
+
+ nop // Pad write to tag.
+ nop
+
+ hw_rei
+
+
+
+// .sbttl "UNALIGN -- Dstream unalign trap"
+//+
+// UNALIGN - offset 0300
+// Entry:
+// Vectored into via hardware trap on unaligned Dstream reference.
+//
+// Function:
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- Opcode
+// a2 <- src/dst register number
+// vector via entUna
+//-
+
+ HDW_VECTOR(PAL_UNALIGN_ENTRY)
+Trap_Unalign:
+/* DEBUGSTORE(0x47)*/
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
+ mfpr r14, exc_addr // get pc
+
+ srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
+ blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
+
+ blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
+ // not set, must be a load
+ and r13, 0x1F, r8 // isolate ra
+
+ cmpeq r8, 0x1F, r8 // check for r31/F31
+ bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
+
+UNALIGN_NO_DISMISS:
+ bis r11, r31, r12 // Save PS
+ bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+UNALIGN_NO_DISMISS_10_:
+ mfpr r25, ev5__va // Unlock VA
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ mtpr r25, pt0 // Stash VA
+ stq r18, osfsf_a2(sp) // a2
+
+ stq r11, osfsf_ps(sp) // save old ps
+ srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
+
+ stq r29, osfsf_gp(sp) // save gp
+ addq r14, 4, r14 // inc PC past the ld/st
+
+ stq r17, osfsf_a1(sp) // a1
+ and r25, mm_stat_m_opcode, r17// Clean opocde for a1
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r16, pt0 // a0 <- va/unlock
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entuna // get entry point
+
+
+ bis r12, r31, r11 // update ps
+ br r31, unalign_trap_cont
+
+
+
+
+// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
+
+//+
+// DFAULT - offset 0380
+// Entry:
+// Vectored into via hardware trap on dstream fault or sign check error on DVA.
+//
+// Function:
+// Ignore faults on FETCH/FETCH_M
+// Check for DFAULT in PAL
+// Build stack frame
+// a0 <- Faulting VA
+// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
+// a2 <- R/W
+// vector via entMM
+//
+//-
+ HDW_VECTOR(PAL_D_FAULT_ENTRY)
+Trap_Dfault:
+// DEBUGSTORE(0x48)
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r13, ev5__mm_stat // Get mmstat
+ mfpr r8, exc_addr // get pc, preserve r14
+
+ srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
+ blbs r8, dfault_in_pal
+
+ bis r8, r31, r14 // move exc_addr to correct place
+ bis r11, r31, r12 // Save PS
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ and r9, mm_stat_m_opcode, r9 // Clean all but opcode
+
+ cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+ //dismiss exception if load to r31/f31
+ blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
+
+ and r9, 0x1F, r9 // isolate rnum
+ nop
+
+ cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
+ bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
+
+dfault_no_dismiss:
+ and r13, 0xf, r13 // Clean extra bits in mm_stat
+ bge r25, dfault_trap_cont // no stack swap needed if cm=kern
+
+
+ mtpr r30, pt_usp // save user stack
+ bis r31, r31, r12 // Set new PS
+
+ mfpr r30, pt_ksp
+ br r31, dfault_trap_cont
+
+
+
+
+
+// .sbttl "MCHK - Machine Check Trap Entry Point"
+
+//+
+// MCHK - offset 0400
+// Entry:
+// Vectored into via hardware trap on machine check.
+//
+// Function:
+//
+//-
+
+ HDW_VECTOR(PAL_MCHK_ENTRY)
+Trap_Mchk:
+ DEBUGSTORE(0x49)
+ mtpr r31, ic_flush_ctl // Flush the Icache
+ br r31, sys_machine_check
+
+
+
+
+// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
+
+//+
+// OPCDEC - offset 0480
+// Entry:
+// Vectored into via hardware trap on illegal opcode.
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_OPCDEC_ENTRY)
+Trap_Opcdec:
+ DEBUGSTORE(0x4a)
+//simos DEBUG_EXC_ADDR()
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_OPCDEC_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ addq r14, 4, r14 // inc pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r11, osfsf_ps(sp) // save old ps
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r29, osfsf_gp(sp) // save gp
+ stq r14, osfsf_pc(sp) // save pc
+
+ bis r12, r31, r11 // update ps
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei, E1
+
+ mfpr r29, pt_kgp // get the kgp, E1
+
+ hw_rei_spe // done, E1
+
+
+
+
+
+
+// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
+
+//+
+// ARITH - offset 0500
+// Entry:
+// Vectored into via hardware trap on arithmetic excpetion.
+//
+// Function:
+// Build stack frame
+// a0 <- exc_sum
+// a1 <- exc_mask
+// a2 <- unpred
+// vector via entArith
+//
+//-
+ HDW_VECTOR(PAL_ARITH_ENTRY)
+Trap_Arith:
+ DEBUGSTORE(0x4b)
+ and r11, osfps_m_mode, r12 // get mode bit
+ mfpr r31, ev5__va // unlock mbox
+
+ bis r11, r31, r25 // save ps
+ mfpr r14, exc_addr // get pc
+
+ nop
+ blbs r14, pal_pal_bug_check // arith trap from PAL
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ beq r12, TRAP_ARITH_10_ // if zero we are in kern now
+
+ bis r31, r31, r25 // set the new ps
+ mtpr r30, pt_usp // save user stack
+
+ nop
+ mfpr r30, pt_ksp // get kern stack
+
+TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ nop // Pad current mode write and stq
+ mfpr r13, ev5__exc_sum // get the exc_sum
+
+ mfpr r12, pt_entarith
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r17, osfsf_a1(sp)
+ mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
+
+ stq r11, osfsf_ps(sp) // save ps
+ bis r25, r31, r11 // set new ps
+
+ stq r16, osfsf_a0(sp) // save regs
+ srl r13, exc_sum_v_swc, r16// shift data to correct position
+
+ stq r18, osfsf_a2(sp)
+// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
+ mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
+
+ stq r29, osfsf_gp(sp)
+ mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
+
+ mfpr r29, pt_kgp // get the kern gp - E1
+ hw_rei_spe // done - E1
+
+
+
+
+
+
+// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
+
+//+
+// FEN - offset 0580
+// Entry:
+// Vectored into via hardware trap on illegal FP op.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ HDW_VECTOR(PAL_FEN_ENTRY)
+Trap_Fen:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ blbs r14, pal_pal_bug_check // check opcdec in palmode
+
+ mfpr r13, ev5__icsr
+ nop
+
+ bis r11, r31, r12 // Save PS
+ bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r12 // Set new PS
+ mfpr r30, pt_ksp
+
+TRAP_FEN_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
+
+
+ stq r16, osfsf_a0(sp) // save regs
+ mfpr r13, pt_entif // get entry point
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r11, osfsf_ps(sp) // save old ps
+
+ stq r29, osfsf_gp(sp) // save gp
+ bis r12, r31, r11 // set new ps
+
+ stq r17, osfsf_a1(sp) // a1
+ blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
+
+ bis r31, osf_a0_fen, r16 // set a0
+ stq r14, osfsf_pc(sp) // save pc
+
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei -E1
+
+ mfpr r29, pt_kgp // get the kgp -E1
+
+ hw_rei_spe // done -E1
+
+// FEN trap was taken, but the fault is really opcdec.
+ ALIGN_BRANCH
+fen_to_opcdec:
+ addq r14, 4, r14 // save PC+4
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r14, osfsf_pc(sp) // save pc
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+ hw_rei_spe // done
+
+
+
+// .sbttl "Misc handlers"
+ // Start area for misc code.
+//+
+//dfault_trap_cont
+// A dfault trap has been taken. The sp has been updated if necessary.
+// Push a stack frame a vector via entMM.
+//
+// Current state:
+// r12 - new PS
+// r13 - MMstat
+// VA - locked
+//
+//-
+ ALIGN_BLOCK
+dfault_trap_cont:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r25, ev5__va // Fetch VA/unlock
+
+ stq r18, osfsf_a2(sp) // a2
+ and r13, 1, r18 // Clean r/w bit for a2
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r25, r31, r16 // a0 <- va
+
+ stq r17, osfsf_a1(sp) // a1
+ srl r13, 1, r17 // shift fault bits to right position
+
+ stq r11, osfsf_ps(sp) // save old ps
+ bis r12, r31, r11 // update ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entmm // get entry point
+
+ stq r29, osfsf_gp(sp) // save gp
+ cmovlbs r17, 1, r17 // a2. acv overrides fox.
+
+ mtpr r25, exc_addr // load exc_addr with entMM
+ // 1 cycle to hw_rei
+ mfpr r29, pt_kgp // get the kgp
+
+ hw_rei_spe // done
+
+//+
+//unalign_trap_cont
+// An unalign trap has been taken. Just need to finish up a few things.
+//
+// Current state:
+// r25 - entUna
+// r13 - shifted MMstat
+//
+//-
+ ALIGN_BLOCK
+unalign_trap_cont:
+ mtpr r25, exc_addr // load exc_addr with entUna
+ // 1 cycle to hw_rei
+
+
+ mfpr r29, pt_kgp // get the kgp
+ and r13, mm_stat_m_ra, r18 // Clean Ra for a2
+
+ hw_rei_spe // done
+
+
+
+//+
+// dfault_in_pal
+// Dfault trap was taken, exc_addr points to a PAL PC.
+// r9 - mmstat<opcode> right justified
+// r8 - exception address
+//
+// These are the cases:
+// opcode was STQ -- from a stack builder, KSP not valid halt
+// r14 - original exc_addr
+// r11 - original PS
+// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
+// KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
+// r11 - original PS
+// r14 - original exc_addr
+// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
+// r10 - original exc_addr
+// r11 - original PS
+//
+//
+//-
+ ALIGN_BLOCK
+dfault_in_pal:
+ DEBUGSTORE(0x50)
+ bic r8, 3, r8 // Clean PC
+ mfpr r9, pal_base
+
+ mfpr r31, va // unlock VA
+#if real_mm != 0
+ // if not real_mm, should never get here from miss flows
+
+ subq r9, r8, r8 // pal_base - offset
+
+ lda r9, pal_itb_ldq-pal_base(r8)
+ nop
+
+ beq r9, dfault_do_bugcheck
+ lda r9, pal_dtb_ldq-pal_base(r8)
+
+ beq r9, dfault_do_bugcheck
+#endif
+
+//
+// KSP invalid halt case --
+ksp_inval_halt:
+ DEBUGSTORE(76)
+ bic r11, osfps_m_mode, r11 // set ps to kernel mode
+ mtpr r0, pt0
+
+ mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
+ mtpr r31, ips
+
+ mtpr r14, exc_addr // Set PC to instruction that caused trouble
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+
+ lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
+ br r31, sys_enter_console // enter the console
+
+ ALIGN_BRANCH
+dfault_do_bugcheck:
+ bis r10, r31, r14 // bugcheck expects exc_addr in r14
+ br r31, pal_pal_bug_check
+
+
+ ALIGN_BLOCK
+//+
+// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
+// On entry -
+// r14 - exc_addr
+// VA is locked
+//
+//-
+dfault_fetch_ldr31_err:
+ mtpr r11, ev5__dtb_cm
+ mtpr r11, ev5__ps // Make sure ps hasn't changed
+
+ mfpr r31, va // unlock the mbox
+ addq r14, 4, r14 // inc the pc to skip the fetch
+
+ mtpr r14, exc_addr // give ibox new PC
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei
+
+
+
+ ALIGN_BLOCK
+//+
+// sys_from_kern
+// callsys from kernel mode - OS bugcheck machine check
+//
+//-
+sys_from_kern:
+ mfpr r14, exc_addr // PC points to call_pal
+ subq r14, 4, r14
+
+ lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
+ br r31, pal_pal_mchk
+
+
+// .sbttl "Continuation of long call_pal flows"
+ ALIGN_BLOCK
+//+
+// wrent_tbl
+// Table to write *int in paltemps.
+// 4 instructions/entry
+// r16 has new value
+//
+//-
+wrent_tbl:
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entint
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entarith
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entmm
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entif
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entuna
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+
+//orig pvc_jsr wrent, dest=1
+ nop
+ mtpr r16, pt_entsys
+
+ mfpr r31, pt0 // Pad for mt->mf paltemp rule
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// tbi_tbl
+// Table to do tbi instructions
+// 4 instructions per entry
+//-
+tbi_tbl:
+ // -2 tbia
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_ia // Flush DTB
+ mtpr r31, ev5__itb_ia // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+ // -1 tbiap
+//orig pvc_jsr tbi, dest=1
+ mtpr r31, ev5__dtb_iap // Flush DTB
+ mtpr r31, ev5__itb_iap // Flush ITB
+
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush // Flush Icache
+#else
+
+ hw_rei_stall
+#endif
+
+ nop // Pad table
+
+
+ // 0 unused
+//orig pvc_jsr tbi, dest=1
+ hw_rei // Pad table
+ nop
+ nop
+ nop
+
+
+ // 1 tbisi
+//orig pvc_jsr tbi, dest=1
+#if icflush_on_tbix != 0
+
+
+
+ nop
+ br r31, pal_ic_flush_and_tbisi // Flush Icache
+ nop
+ nop // Pad table
+#else
+
+ nop
+ nop
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ // 2 tbisd
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB.
+ nop
+
+ nop
+ hw_rei_stall
+
+
+ // 3 tbis
+//orig pvc_jsr tbi, dest=1
+ mtpr r17, ev5__dtb_is // Flush DTB
+#if icflush_on_tbix != 0
+
+
+ br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
+#else
+ br r31, tbi_finish
+ ALIGN_BRANCH
+tbi_finish:
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+#endif
+
+
+
+ ALIGN_BLOCK
+//+
+// bpt_bchk_common:
+// Finish up the bpt/bchk instructions
+//-
+bpt_bchk_common:
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_user
+// Finish up the rti instruction
+//-
+rti_to_user:
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mfpr r30, pt_usp
+ hw_rei_spe // and back
+
+
+ ALIGN_BLOCK
+//+
+// rti_to_kern
+// Finish up the rti instruction
+//-
+rti_to_kern:
+ and r12, osfps_m_ipl, r11 // clean ps
+ mfpr r12, pt_intmask // get int mask
+
+ extbl r12, r11, r12 // get mask for this ipl
+ mtpr r25, pt_ksp // save off incase RTI to user
+
+ mtpr r12, ev5__ipl // set the new ipl.
+ or r25, r31, sp // sp
+
+// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
+ hw_rei
+
+ ALIGN_BLOCK
+//+
+// swpctx_cont
+// Finish up the swpctx instruction
+//-
+
+swpctx_cont:
+#if ev5_p1 != 0
+
+
+ bic r25, r24, r25 // clean icsr<FPE>
+ get_impure r8 // get impure pointer
+
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+ fix_impure_ipr r8 // adjust impure pointer
+
+ restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
+ srl r23, 32, r24 // move asn to low asn pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ sll r24, itb_asn_v_asn, r12
+
+#else
+
+ bic r25, r24, r25 // clean icsr<FPE,PMP>
+ sll r12, icsr_v_fpe, r12 // shift new fen to pos
+
+ ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
+ srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
+
+ or r25, r12, r25 // icsr with new fen
+ srl r23, 32, r24 // move asn to low asn pos
+
+ and r22, 1, r22
+ sll r24, itb_asn_v_asn, r12
+
+ sll r22, icsr_v_pmp, r22
+ nop
+
+ or r25, r22, r25 // icsr with new pme
+#endif
+
+ sll r24, dtb_asn_v_asn, r24
+
+ subl r23, r13, r13 // gen new cc offset
+ mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
+
+ mtpr r24, dtb_asn // Load up new ASN
+ mtpr r25, icsr // write the icsr
+
+ sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
+ ldqp r25, osfpcb_q_usp(r16) // get new usp
+
+ insll r13, 4, r13 // >> 32
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r14, pt_ptbr // load the new ptbr
+
+ mtpr r13, cc // set new offset
+ ldqp r30, osfpcb_q_ksp(r16) // get new ksp
+
+// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
+ mtpr r25, pt_usp // save usp
+
+#if ev5_p1 != 0
+
+
+ blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
+
+ // otherwise, monitoring select processes - update pm
+ lda r25, 0x3F(r31)
+ cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
+
+ sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
+ mfpr r22, ev5__pmctr
+
+ and r8, r25, r8 // mask new ctl value
+ bic r22, r25, r22 // clear ctl field in pmctr
+
+ or r8, r22, r8
+ mtpr r8, ev5__pmctr
+
+no_pm_change:
+#endif
+
+
+#if osf_chm_fix != 0
+
+
+ p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
+
+#if build_fixed_image != 0
+
+
+ hw_rei_stall
+#else
+
+ mfpr r9, pt_pcbb // get FEN
+#endif
+
+ ldqp r9, osfpcb_q_fen(r9)
+ blbc r9, no_pm_change_10_ // skip if FEN disabled
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31)
+ mtpr r12, dc_mode // turn dcache on so we can flush it
+ nop // force correct slotting
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+ mfpr r31, pt0 // no mbox instructions in 1,2,3,4
+
+ lda r8, 0(r31) // flood the dcache with junk data
+no_pm_change_5_: ldqp r31, 0(r8)
+ lda r8, 0x20(r8) // touch each cache block
+ srl r8, 13, r9
+ blbc r9, no_pm_change_5_
+
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn the dcache back off
+ nop // force correct slotting
+ mfpr r31, pt0 // no hw_rei_stall in 0,1
+#endif
+
+
+no_pm_change_10_: hw_rei_stall // back we go
+
+ ALIGN_BLOCK
+//+
+// swppal_cont - finish up the swppal call_pal
+//-
+
+swppal_cont:
+ mfpr r2, pt_misc // get misc bits
+ sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
+ or r2, r0, r2 // set the bit
+ mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
+ mtpr r2, pt_misc // update the chip
+
+ or r3, r31, r4
+ mfpr r3, pt_impure // pass pointer to the impure area in r3
+//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
+//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
+//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
+//orig unfix_impure_ipr r3 // restore impure pointer
+ lda r3, CNS_Q_IPR(r3)
+ RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
+ RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
+ lda r3, -CNS_Q_IPR(r3)
+
+ or r31, r31, r0 // set status to success
+// pvc_violate 1007
+ jmp r31, (r4) // and call our friend, it's her problem now
+
+
+swppal_fail:
+ addq r0, 1, r0 // set unknown pal or not loaded
+ hw_rei // and return
+
+
+// .sbttl "Memory management"
+
+ ALIGN_BLOCK
+//+
+//foe_ipte_handler
+// IFOE detected on level 3 pte, sort out FOE vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV vs FOE. Build stack and dispatch
+// Will not be here if TNV.
+//-
+
+foe_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ lda r17, mmcsr_c_acv(r31) // assume ACV
+
+ stq r16, osfsf_pc(sp) // save pc
+ cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+ ALIGN_BLOCK
+//+
+//invalid_ipte_handler
+// TNV detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R8 = pte
+// R10 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch.
+//-
+
+invalid_ipte_handler:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ nop
+
+invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r14 // Save pc/va in case TBmiss on stack
+ mfpr r13, pt_entmm // get entry point
+
+ stq r16, osfsf_a0(sp) // a0
+ or r14, r31, r16 // pass pc/va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ and r25, 1, r17 // Isolate kre
+
+ stq r16, osfsf_pc(sp) // save pc
+ xor r17, 1, r17 // map to acv/tnv as a1
+
+ stq r12, osfsf_ps(sp) // save ps
+ subq r31, 1, r18 // pass flag of istream as a2
+
+ stq r29, osfsf_gp(sp)
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ hw_rei_spe // out to exec
+
+
+
+
+ ALIGN_BLOCK
+//+
+//invalid_dpte_handler
+// INVALID detected on level 3 pte, sort out TNV vs ACV
+//
+// on entry:
+// with
+// R10 = va
+// R8 = pte
+// R9 = mm_stat
+// PT6 = pc
+//
+// Function
+// Determine TNV vs ACV. Build stack and dispatch
+//-
+
+
+invalid_dpte_handler:
+ mfpr r12, pt6
+ blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
+
+ bis r12, r31, r14 // save PC in case of tbmiss or fault
+ srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
+
+ mtpr r11, pt0 // Save PS for stack write
+ and r25, mm_stat_m_opcode, r25 // isolate opcode
+
+ cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
+ blbs r25, nmiss_fetch_ldr31_err // yes
+
+ //dismiss exception if load to r31/f31
+ blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
+
+ // not a store or fetch, must be a load
+ srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
+
+ and r25, 0x1F, r25 // isolate rnum
+ nop
+
+ cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
+ bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
+
+invalid_dpte_no_dismiss:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
+
+ srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+
+ or r10, r31, r25 // Save va in case TBmiss on stack
+ and r9, 1, r13 // save r/w flag
+
+ stq r16, osfsf_a0(sp) // a0
+ or r25, r31, r16 // pass va as a0
+
+ stq r17, osfsf_a1(sp) // a1
+ or r31, mmcsr_c_acv, r17 // assume acv
+
+ srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
+ stq r29, osfsf_gp(sp)
+
+ stq r18, osfsf_a2(sp) // a2
+ cmovlbs r13, r25, r12 // if write access move acv based on write enable
+
+ or r13, r31, r18 // pass flag of dstream access and read vs write
+ mfpr r25, pt0 // get ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r13, pt_entmm // get entry point
+
+ stq r25, osfsf_ps(sp) // save ps
+ mtpr r13, exc_addr // set vector address
+
+ mfpr r29, pt_kgp // load kgp
+ cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
+
+ hw_rei_spe // out to exec
+
+//+
+//
+// We come here if we are erring on a dtb_miss, and the instr is a
+// fetch, fetch_m, of load to r31/f31.
+// The PC is incremented, and we return to the program.
+// essentially ignoring the instruction and error.
+//
+//-
+ ALIGN_BLOCK
+nmiss_fetch_ldr31_err:
+ mfpr r12, pt6
+ addq r12, 4, r12 // bump pc to pc+4
+
+ mtpr r12, exc_addr // and set entry point
+ mfpr r31, pt0 // pad exc_addr write
+
+ hw_rei //
+
+ ALIGN_BLOCK
+//+
+// double_pte_inv
+// We had a single tbmiss which turned into a double tbmiss which found
+// an invalid PTE. Return to single miss with a fake pte, and the invalid
+// single miss flow will report the error.
+//
+// on entry:
+// r21 PTE
+// r22 available
+// VA IPR locked with original fault VA
+// pt4 saved r21
+// pt5 saved r22
+// pt6 original exc_addr
+//
+// on return to tbmiss flow:
+// r8 fake PTE
+//
+//
+//-
+double_pte_inv:
+ srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
+ mfpr r22, exc_addr // get the pc
+
+ lda r22, 4(r22) // inc the pc
+ lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
+
+ cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
+ mtpr r22, exc_addr // set for rei
+
+ mfpr r21, pt4 // restore regs
+ mfpr r22, pt5 // restore regs
+
+ hw_rei // back to tb miss
+
+ ALIGN_BLOCK
+//+
+//tnv_in_pal
+// The only places in pal that ld or store are the
+// stack builders, rti or retsys. Any of these mean we
+// need to take a ksp not valid halt.
+//
+//-
+tnv_in_pal:
+
+
+ br r31, ksp_inval_halt
+
+
+// .sbttl "Icache flush routines"
+
+ ALIGN_BLOCK
+//+
+// Common Icache flush routine.
+//
+//
+//-
+pal_ic_flush:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+ nop
+ nop
+
+one_cycle_and_hw_rei:
+ nop
+ nop
+
+ hw_rei_stall
+
+#if icflush_on_tbix != 0
+
+
+ ALIGN_BLOCK
+
+//+
+// Common Icache flush and ITB invalidate single routine.
+// ITBIS and hw_rei_stall must be in same octaword.
+// r17 - has address to invalidate
+//
+//-
+PAL_IC_FLUSH_AND_TBISI:
+ nop
+ mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
+ nop
+ nop
+
+// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 10
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 20
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 30
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop // 40
+
+
+ nop
+ nop
+
+ nop
+ nop
+
+ // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
+ // 44 nops plus 4 instructions before it is 48 instructions.
+ // Since this routine started on a 32-byte (8 instruction) boundary,
+ // the following 2 instructions will be in the same octword as required.
+// ALIGN_BRANCH
+ mtpr r17, ev5__itb_is // Flush ITB
+ hw_rei_stall
+
+#endif
+
+ ALIGN_BLOCK
+//+
+//osfpal_calpal_opcdec
+// Here for all opcdec CALL_PALs
+//
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+osfpal_calpal_opcdec:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r14, exc_addr // get pc
+ nop
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
+
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+osfpal_calpal_opcdec_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ nop
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_opdec, r16 // set a0
+
+ stq r18, osfsf_a2(sp) // a2
+ mfpr r13, pt_entif // get entry point
+
+ stq r12, osfsf_ps(sp) // save old ps
+ stq r17, osfsf_a1(sp) // a1
+
+ stq r14, osfsf_pc(sp) // save pc
+ nop
+
+ stq r29, osfsf_gp(sp) // save gp
+ mtpr r13, exc_addr // load exc_addr with entIF
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kgp
+
+
+ hw_rei_spe // done
+
+
+
+
+
+//+
+//pal_update_pcb
+// Update the PCB with the current SP, AST, and CC info
+//
+// r0 - return linkage
+//-
+ ALIGN_BLOCK
+
+pal_update_pcb:
+ mfpr r12, pt_pcbb // get pcbb
+ and r11, osfps_m_mode, r25 // get mode
+ beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
+ mtpr r30, pt_usp // save user stack
+ stqp r30, osfpcb_q_usp(r12) // store usp
+ br r31, pal_update_pcb_20_ // join common
+pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
+pal_update_pcb_20_: rpcc r13 // get cyccounter
+ srl r13, 32, r14 // move offset
+ addl r13, r14, r14 // merge for new time
+ stlp r14, osfpcb_l_cc(r12) // save time
+
+//orig pvc_jsr updpcb, bsr=1, dest=1
+ ret r31, (r0)
+
+
+
+#if remove_save_state == 0
+
+// .sbttl "PAL_SAVE_STATE"
+//+
+//
+// Pal_save_state
+//
+// Function
+// All chip state saved, all PT's, SR's FR's, IPR's
+//
+//
+// Regs' on entry...
+//
+// R0 = halt code
+// pt0 = r0
+// R1 = pointer to impure
+// pt4 = r1
+// R3 = return addr
+// pt5 = r3
+//
+// register usage:
+// r0 = halt_code
+// r1 = addr of impure area
+// r3 = return_address
+// r4 = scratch
+//
+//-
+
+
+ ALIGN_BLOCK
+ .globl pal_save_state
+pal_save_state:
+//
+//
+// start of implementation independent save routine
+//
+// the impure area is larger than the addressibility of hw_ld and hw_st
+// therefore, we need to play some games: The impure area
+// is informally divided into the "machine independent" part and the
+// "machine dependent" part. The state that will be saved in the
+// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
+// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
+// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
+// macros will automagically adjust the offset correctly.
+//
+
+// The distributed code is commented out and followed by corresponding SRC code.
+// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
+
+//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
+//orig store_reg1 hlt, r0, r1, ipr=1
+ SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
+
+ mfpr r0, pt0 // get r0 back //orig
+//orig store_reg1 0, r0, r1 // save r0
+ SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
+
+ mfpr r0, pt4 // get r1 back //orig
+//orig store_reg1 1, r0, r1 // save r1
+ SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
+
+//orig store_reg 2 // save r2
+ SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
+
+ mfpr r0, pt5 // get r3 back //orig
+//orig store_reg1 3, r0, r1 // save r3
+ SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
+
+ // reason code has been saved
+ // r0 has been saved
+ // r1 has been saved
+ // r2 has been saved
+ // r3 has been saved
+ // pt0, pt4, pt5 have been lost
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r2, icsr // Get icsr //orig
+//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r0, (1<<(icsr_v_sde-16))(r31)
+ bic r2, r0, r0 // ICSR with SDE clear //orig
+ mtpr r0, icsr // Turn off SDE //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+
+ // save integer regs R4-r31
+//orig #define t 4
+//orig .repeat 28
+//orig store_reg \t
+//orig #define t t + 1
+//orig .endr
+ SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+ // save all paltemp regs except pt0
+
+//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
+//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
+//orig #define t 1
+//orig .repeat 23
+//orig store_reg \t , pal=1
+//orig #define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore the impure base address.
+ lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
+ SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+ // Restore shadow mode
+ mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
+ mfpr r31, pt0 //orig
+ mtpr r2, icsr // Restore original ICSR //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+ // save all integer shadow regs
+
+//orig #define t 8
+//orig .repeat 7
+//orig store_reg \t, shadow=1
+//orig #define t t + 1
+//orig .endr
+//orig store_reg 25, shadow=1
+
+ SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+
+//orig store_reg exc_addr, ipr=1 // save ipr
+//orig store_reg pal_base, ipr=1 // save ipr
+//orig store_reg mm_stat, ipr=1 // save ipr
+//orig store_reg va, ipr=1 // save ipr
+//orig store_reg icsr, ipr=1 // save ipr
+//orig store_reg ipl, ipr=1 // save ipr
+//orig store_reg ps, ipr=1 // save ipr
+//orig store_reg itb_asn, ipr=1 // save ipr
+//orig store_reg aster, ipr=1 // save ipr
+//orig store_reg astrr, ipr=1 // save ipr
+//orig store_reg sirr, ipr=1 // save ipr
+//orig store_reg isr, ipr=1 // save ipr
+//orig store_reg ivptbr, ipr=1 // save ipr
+//orig store_reg mcsr, ipr=1 // save ipr
+//orig store_reg dc_mode, ipr=1 // save ipr
+
+ SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
+ SAVE_IPR(va,CNS_Q_VA,r1)
+ SAVE_IPR(icsr,CNS_Q_ICSR,r1)
+ SAVE_IPR(ipl,CNS_Q_IPL,r1)
+ SAVE_IPR(ips,CNS_Q_IPS,r1)
+ SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ SAVE_IPR(aster,CNS_Q_ASTER,r1)
+ SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
+ SAVE_IPR(sirr,CNS_Q_SIRR,r1)
+ SAVE_IPR(isr,CNS_Q_ISR,r1)
+ SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
+ SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
+//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
+//orig // PVC violation applies only to
+pvc$osf35$379: // loads. HW_ST ok here, so ignore
+ SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
+
+
+ //the following iprs are informational only -- will not be restored
+
+//orig store_reg icperr_stat, ipr=1
+//orig store_reg pmctr, ipr=1
+//orig store_reg intid, ipr=1
+//orig store_reg exc_sum, ipr=1
+//orig store_reg exc_mask, ipr=1
+//orig ldah r14, 0xfff0(r31)
+//orig zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig nop // pad mf dcperr_stat out of shadow of last store
+//orig nop
+//orig nop
+//orig store_reg dcperr_stat, ipr=1
+
+ SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
+ SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
+ SAVE_IPR(intId,CNS_Q_INT_ID,r1)
+ SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
+ SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
+ ldah r14, 0xFFF0(zero)
+ zap r14, 0xE0, r14 // Get base address of CBOX IPRs
+ NOP // Pad mfpr dcPerr out of shadow of
+ NOP // last store
+ NOP
+ SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
+
+ // read cbox ipr state
+
+//orig mb
+//orig ldqp r2, ev5__sc_ctl(r14)
+//orig ldqp r13, ld_lock(r14)
+//orig ldqp r4, ev5__sc_addr(r14)
+//orig ldqp r5, ev5__ei_addr(r14)
+//orig ldqp r6, ev5__bc_tag_addr(r14)
+//orig ldqp r7, ev5__fill_syn(r14)
+//orig bis r5, r4, r31
+//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
+//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
+//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
+//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
+//orig mb
+
+#ifndef SIMOS
+ mb
+ ldq_p r2, scCtl(r14)
+ ldq_p r13, ldLock(r14)
+ ldq_p r4, scAddr(r14)
+ ldq_p r5, eiAddr(r14)
+ ldq_p r6, bcTagAddr(r14)
+ ldq_p r7, fillSyn(r14)
+ bis r5, r4, zero // Make sure all loads complete before
+ bis r7, r6, zero // reading registers that unlock them.
+ ldq_p r8, scStat(r14) // Unlocks scAddr.
+ ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
+ ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
+ mb
+#endif
+//orig // save cbox ipr state
+//orig store_reg1 sc_ctl, r2, r1, ipr=1
+//orig store_reg1 ld_lock, r13, r1, ipr=1
+//orig store_reg1 sc_addr, r4, r1, ipr=1
+//orig store_reg1 ei_addr, r5, r1, ipr=1
+//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
+//orig store_reg1 fill_syn, r7, r1, ipr=1
+//orig store_reg1 sc_stat, r8, r1, ipr=1
+//orig store_reg1 ei_stat, r9, r1, ipr=1
+//orig //bc_config? sl_rcv?
+
+ SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
+ SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
+ SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
+ SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
+ SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
+ SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
+ SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
+ SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
+
+// restore impure base //orig
+//orig unfix_impure_ipr r1
+ lda r1, -CNS_Q_IPR(r1)
+
+// save all floating regs //orig
+ mfpr r0, icsr // get icsr //orig
+ or r31, 1, r2 // get a one //orig
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
+ sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
+ or r2, r0, r0 // set FEN on //orig
+ mtpr r0, icsr // write to icsr, enabling FEN //orig
+
+// map the save area virtually
+// orig mtpr r31, dtb_ia // clear the dtb
+// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+// orig sll r0, 32, r0 // shift to PFN field
+// orig lda r2, 0xff(r31) // all read enable and write enable bits set
+// orig sll r2, 8, r2 // move to PTE location
+// orig addq r0, r2, r0 // combine with PFN
+// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+// orig mtpr r1, dtb_tag // write TB tag
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too - in case the impure area crosses a page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag
+
+ lda r4, (1<<va_s_off)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+ sll r31, 0, r31 // stall cycle 1 // orig
+ sll r31, 0, r31 // stall cycle 2 // orig
+ sll r31, 0, r31 // stall cycle 3 // orig
+ nop // orig
+
+//orig // add offset for saving fpr regs
+//orig fix_impure_gpr r1
+
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+// now save the regs - F0-F31
+
+//orig #define t 0
+//orig .repeat 32
+//orig store_reg \t , fpu=1
+//orig #define t t + 1
+//orig .endr
+
+ mf_fpcr f0 // original
+
+ SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig //switch impure offset from gpr to ipr---
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig store_reg1 fpcsr, f0, r1, fpcsr=1
+
+ SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
+ lda r1, -0x200(r1) // Restore the impure base address
+
+//orig // and back to gpr ---
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+
+//orig lda r0, cns_mchksize(r31) // get size of mchk area
+//orig store_reg1 mchkflag, r0, r1, ipr=1
+//orig mb
+
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
+ // save this using the IPR base (it is closer) not the GRP base as they used...pb
+ lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
+ SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
+ mb
+
+//orig or r31, 1, r0 // get a one
+//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
+//orig mb
+
+ lda r1, -CNS_Q_IPR(r1) // back to the base
+ lda r1, 0x200(r1) // Point to center of CPU segment
+ or r31, 1, r0 // get a one
+ SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
+ mb
+
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+ lda r1, -0x200(r1) // Point to center of CPU segment
+
+ mtpr r31, dtb_ia // clear the dtb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr savsta, bsr=1, dest=1
+ ret r31, (r3) // and back we go
+#endif
+
+
+#if remove_restore_state == 0
+
+
+// .sbttl "PAL_RESTORE_STATE"
+//+
+//
+// Pal_restore_state
+//
+//
+// register usage:
+// r1 = addr of impure area
+// r3 = return_address
+// all other regs are scratchable, as they are about to
+// be reloaded from ram.
+//
+// Function:
+// All chip state restored, all SRs, FRs, PTs, IPRs
+// *** except R1, R3, PT0, PT4, PT5 ***
+//
+//-
+ ALIGN_BLOCK
+pal_restore_state:
+
+//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
+
+//orig // map the console io area virtually
+//orig mtpr r31, dtb_ia // clear the dtb
+//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r1, dtb_tag // write TB tag
+//orig
+
+ mtpr r31, dtbIa // Clear all DTB entries
+ srl r1, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r1, dtbTag // Write the PTE and tag into the DTB
+
+
+//orig // map the next page too, in case impure area crosses page boundary
+//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
+//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
+//orig sll r0, 32, r0 // shift to PFN field
+//orig lda r2, 0xff(r31) // all read enable and write enable bits set
+//orig sll r2, 8, r2 // move to PTE location
+//orig addq r0, r2, r0 // combine with PFN
+//orig
+//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
+//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
+
+ lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
+ srl r4, va_s_off, r0 // Clean off byte-within-page offset
+ sll r0, pte_v_pfn, r0 // Shift to form PFN
+ lda r0, pte_m_prot(r0) // Set all read/write enable bits
+ mtpr r0, dtbPte // Load the PTE and set valid
+ mtpr r4, dtbTag // Write the PTE and tag into the DTB
+
+//orig // save all floating regs
+//orig mfpr r0, icsr // get icsr
+//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
+//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
+//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
+//orig or r2, r0, r0 // set FEN on
+//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
+
+ mfpr r0, icsr // Get current ICSR
+ bis zero, 1, r2 // Get a '1'
+ or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
+ sll r2, icsr_v_fpe, r2 // Shift bits into position
+ bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
+ mtpr r0, icsr // Update the chip
+
+ mfpr r31, pt0 // FPE bubble cycle 1 //orig
+ mfpr r31, pt0 // FPE bubble cycle 2 //orig
+ mfpr r31, pt0 // FPE bubble cycle 3 //orig
+
+//orig fix_impure_ipr r1
+//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
+//orig mt_fpcr f0
+//orig
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
+//orig
+//orig // restore all floating regs
+//orig#define t 0
+//orig .repeat 32
+//orig restore_reg \t , fpu=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, 200(r1) // Point to base of IPR area again
+ RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
+ mt_fpcr f0 // original
+
+ lda r1, 0x200(r1) // point to center of CPU segment
+ RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
+ RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
+ RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
+ RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
+ RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
+ RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
+ RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
+ RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
+ RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
+ RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
+ RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
+ RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
+ RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
+ RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
+ RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
+ RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
+ RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
+ RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
+ RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
+ RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
+ RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
+ RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
+ RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
+ RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
+ RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
+ RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
+ RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
+ RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
+ RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
+ RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
+ RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
+ RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig
+//orig // restore all pal regs
+//orig#define t 1
+//orig .repeat 23
+//orig restore_reg \t , pal=1
+//orig#define t t + 1
+//orig .endr
+
+ lda r1, -0x200(r1) // Restore base address of impure area.
+ lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
+ RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
+ RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
+ RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
+ RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
+ RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
+ RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
+ RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
+ RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
+ RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
+ RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
+ RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
+ RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
+ RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
+ RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
+ RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
+ RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
+ RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
+ RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
+ RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
+ RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
+ RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
+ RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
+ RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
+ RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
+
+
+//orig restore_reg exc_addr, ipr=1 // restore ipr
+//orig restore_reg pal_base, ipr=1 // restore ipr
+//orig restore_reg ipl, ipr=1 // restore ipr
+//orig restore_reg ps, ipr=1 // restore ipr
+//orig mtpr r0, dtb_cm // set current mode in mbox too
+//orig restore_reg itb_asn, ipr=1
+//orig srl r0, itb_asn_v_asn, r0
+//orig sll r0, dtb_asn_v_asn, r0
+//orig mtpr r0, dtb_asn // set ASN in Mbox too
+//orig restore_reg ivptbr, ipr=1
+//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
+//orig restore_reg mcsr, ipr=1
+//orig restore_reg aster, ipr=1
+//orig restore_reg astrr, ipr=1
+//orig restore_reg sirr, ipr=1
+//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
+//orig mfpr r31, pt0 // (may issue with mt maf_mode)
+//orig mfpr r31, pt0 // bubble cycle 1
+//orig mfpr r31, pt0 // bubble cycle 2
+//orig mfpr r31, pt0 // bubble cycle 3
+//orig mfpr r31, pt0 // (may issue with following ld)
+
+ // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
+ RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
+ RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
+ RESTORE_IPR(ipl,CNS_Q_IPL,r1)
+ RESTORE_IPR(ips,CNS_Q_IPS,r1)
+ mtpr r0, dtbCm // Set Mbox current mode too.
+ RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
+ srl r0, 4, r0
+ sll r0, 57, r0
+ mtpr r0, dtbAsn // Set Mbox ASN too
+ RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
+ mtpr r0, mVptBr // Set Mbox VptBr too
+ RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
+ RESTORE_IPR(aster,CNS_Q_ASTER,r1)
+ RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
+ RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
+ RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
+ STALL
+ STALL
+ STALL
+ STALL
+ STALL
+
+
+ // restore all integer shadow regs
+//orig#define t 8
+//orig .repeat 7
+//orig restore_reg \t, shadow=1
+//orig#define t t + 1
+//orig .endr
+//orig restore_reg 25, shadow=1
+//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
+
+ RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
+ RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
+ RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
+ RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
+ RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
+ RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
+ RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
+ RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
+ RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
+
+ //
+ // Get out of shadow mode
+ //
+
+ mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
+ mfpr r31, pt0 // "" //orig
+ mfpr r0, icsr // Get icsr //orig
+//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
+ ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
+ bic r0, r2, r2 // ICSR with SDE clear //orig
+ mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
+
+ mfpr r31, pt0 // SDE bubble cycle 1 //orig
+ mfpr r31, pt0 // SDE bubble cycle 2 //orig
+ mfpr r31, pt0 // SDE bubble cycle 3 //orig
+ nop //orig
+
+//orig // switch impure pointer from ipr to gpr area --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig // restore all integer regs
+//orig#define t 4
+//orig .repeat 28
+//orig restore_reg \t
+//orig#define t t + 1
+//orig .endr
+
+// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
+
+ lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
+ lda r1, 0x200(r1) // Point to center of CPU segment
+
+ RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
+ RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
+ RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
+ RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
+ RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
+ RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
+ RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
+ RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
+ RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
+ RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
+ RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
+ RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
+ RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
+ RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
+ RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
+ RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
+ RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
+ RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
+ RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
+ RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
+ RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
+ RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
+ RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
+ RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
+ RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
+ RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
+ RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
+ RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
+
+//orig // switch impure pointer from gpr to ipr area --
+//orig unfix_impure_gpr r1
+//orig fix_impure_ipr r1
+//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
+
+ lda t0, -0x200(t0) // Restore base address of impure area.
+ lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
+ RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
+
+//orig // and back again --
+//orig unfix_impure_ipr r1
+//orig fix_impure_gpr r1
+//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
+//orig mb
+
+ lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
+ lda t0, 0x200(t0) // and back to center of CPU segment
+ SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
+ mb
+
+//orig // and back we go
+//orig// restore_reg 3
+//orig restore_reg 2
+//orig// restore_reg 1
+//orig restore_reg 0
+//orig // restore impure area base
+//orig unfix_impure_gpr r1
+
+ RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
+ RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
+ lda r1, -0x200(r1) // Restore impure base address
+
+ mfpr r31, pt0 // stall for ldqp above //orig
+
+ mtpr r31, dtb_ia // clear the tb //orig
+ mtpr r31, itb_ia // clear the itb //orig
+
+//orig pvc_jsr rststa, bsr=1, dest=1
+ ret r31, (r3) // back we go //orig
+#endif
+
+
+//+
+// pal_pal_bug_check -- code has found a bugcheck situation.
+// Set things up and join common machine check flow.
+//
+// Input:
+// r14 - exc_addr
+//
+// On exit:
+// pt0 - saved r0
+// pt1 - saved r1
+// pt4 - saved r4
+// pt5 - saved r5
+// pt6 - saved r6
+// pt10 - saved exc_addr
+// pt_misc<47:32> - mchk code
+// pt_misc<31:16> - scb vector
+// r14 - base of Cbox IPRs in IO space
+// MCES<mchk> is set
+//-
+
+ ALIGN_BLOCK
+ .globl pal_pal_bug_check_from_int
+pal_pal_bug_check_from_int:
+ DEBUGSTORE(0x79)
+//simos DEBUG_EXC_ADDR()
+ DEBUGSTORE(0x20)
+//simos bsr r25, put_hex
+ lda r25, mchk_c_bugcheck(r31)
+ addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
+ br r31, pal_pal_mchk
+ nop
+
+pal_pal_bug_check:
+ lda r25, mchk_c_bugcheck(r31)
+
+pal_pal_mchk:
+ sll r25, 32, r25 // Move mchk code to position
+
+ mtpr r14, pt10 // Stash exc_addr
+ mtpr r14, exc_addr
+
+ mfpr r12, pt_misc // Get MCES and scratch
+ zap r12, 0x3c, r12
+
+ or r12, r25, r12 // Combine mchk code
+ lda r25, scb_v_procmchk(r31) // Get SCB vector
+
+ sll r25, 16, r25 // Move SCBv to position
+ or r12, r25, r25 // Combine SCBv
+
+ mtpr r0, pt0 // Stash for scratch
+ bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
+
+ mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
+ ldah r14, 0xfff0(r31)
+
+ mtpr r1, pt1 // Stash for scratch
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+
+ mtpr r4, pt4
+ mtpr r5, pt5
+
+ mtpr r6, pt6
+ blbs r12, sys_double_machine_check // MCHK halt if double machine check
+
+ br r31, sys_mchk_collect_iprs // Join common machine check flow
+
+// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
+
+// .sbttl "HALT - PALcode for HALT instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// GO to console code
+//
+//-
+
+ .text 1
+// . = 0x2000
+ CALL_PAL_PRIV(PAL_HALT_ENTRY)
+call_pal_halt:
+#if rax_mode == 0
+ mfpr r31, pt0 // Pad exc_addr read
+ mfpr r31, pt0
+
+ mfpr r12, exc_addr // get PC
+ subq r12, 4, r12 // Point to the HALT
+
+ mtpr r12, exc_addr
+ mtpr r0, pt0
+
+//orig pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+ lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
+ br r31, sys_enter_console // enter the console
+
+#else // RAX mode
+ mb
+ mb
+ mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
+ mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
+ mtpr r8, exc_addr // no HW_REI for 1 cycle.
+ blbc r9, not_begin_case
+ mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
+ mtpr r31, ev5__itb_ia // clear ITB.
+
+not_begin_case:
+ nop
+ nop
+
+ nop
+ nop // pad mt itb_asn ->hw_rei_stall
+
+ hw_rei_stall
+#endif
+
+// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// R16 - contains the PFN of the page to be flushed
+//
+// Function:
+// Flush all Dstream caches of 1 entire page
+// The CFLUSH routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
+Call_Pal_Cflush:
+ br r31, sys_cflush
+
+// .sbttl "DRAINA - PALcode for DRAINA instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Implicit TRAPB performed by hardware.
+//
+// Function:
+// Stall instruction issue until all prior instructions are guaranteed to
+// complete without incurring aborts. For the EV5 implementation, this
+// means waiting until all pending DREADS are returned.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
+Call_Pal_Draina:
+ ldah r14, 0x100(r31) // Init counter. Value?
+ nop
+
+DRAINA_LOOP:
+ subq r14, 1, r14 // Decrement counter
+ mfpr r13, ev5__maf_mode // Fetch status bit
+
+ srl r13, maf_mode_v_dread_pending, r13
+ ble r14, DRAINA_LOOP_TOO_LONG
+
+ nop
+ blbs r13, DRAINA_LOOP // Wait until all DREADS clear
+
+ hw_rei
+
+DRAINA_LOOP_TOO_LONG:
+ br r31, call_pal_halt
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0003)
+CallPal_OpcDec03:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0004)
+CallPal_OpcDec04:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0005)
+CallPal_OpcDec05:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0006)
+CallPal_OpcDec06:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0007)
+CallPal_OpcDec07:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0008)
+CallPal_OpcDec08:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "CSERVE- PALcode for CSERVE instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Various functions for private use of console software
+//
+// option selector in r0
+// arguments in r16....
+// The CSERVE routine is in the system specific module.
+//
+//-
+
+ CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
+Call_Pal_Cserve:
+ br r31, sys_cserve
+
+// .sbttl "swppal - PALcode for swppal instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// Vectored into via hardware PALcode instruction dispatch.
+// R16 contains the new PAL identifier
+// R17:R21 contain implementation-specific entry parameters
+//
+// R0 receives status:
+// 0 success (PAL was switched)
+// 1 unknown PAL variant
+// 2 known PAL variant, but PAL not loaded
+//
+//
+// Function:
+// Swap control to another PAL.
+//-
+
+ CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
+Call_Pal_Swppal:
+ cmpule r16, 255, r0 // see if a kibble was passed
+ cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
+
+ or r16, r31, r3 // set r3 incase this is a address
+ blbc r0, swppal_cont // nope, try it as an address
+
+ cmpeq r16, 2, r0 // is it our friend OSF?
+ blbc r0, swppal_fail // nope, don't know this fellow
+
+ br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
+
+// .global osfpal_hw_entry_reset
+// .weak osfpal_hw_entry_reset
+// .long <osfpal_hw_entry_reset-pal_start>
+//orig halt // don't know how to get the address here - kludge ok, load pal at 0
+ .long 0 // ?? hack upon hack...pb
+
+CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
+// ble r3, swppal_fail ; if OSF not linked in say not loaded.
+ mfpr r2, pal_base // fetch pal base
+
+ addq r2, r3, r3 // add pal base
+ lda r2, 0x3FFF(r31) // get pal base checker mask
+
+ and r3, r2, r2 // any funky bits set?
+ cmpeq r2, 0, r0 //
+
+ blbc r0, swppal_fail // return unknown if bad bit set.
+ br r31, swppal_cont
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000B)
+CallPal_OpcDec0B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000C)
+CallPal_OpcDec0C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wripir- PALcode for wripir instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// r16 = processor number to interrupt
+//
+// Function:
+// IPIR <- R16
+// Handled in system-specific code
+//
+// Exit:
+// interprocessor interrupt is recorded on the target processor
+// and is initiated when the proper enabling conditions are present.
+//-
+
+ CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
+Call_Pal_Wrpir:
+ br r31, sys_wripir
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x000E)
+CallPal_OpcDec0E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x000F)
+CallPal_OpcDec0F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdmces- PALcode for rdmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// R0 <- ZEXT(MCES)
+//-
+
+ CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
+Call_Pal_Rdmces:
+ mfpr r0, pt_mces // Read from PALtemp
+ and r0, mces_m_all, r0 // Clear other bits
+
+ hw_rei
+
+// .sbttl "wrmces- PALcode for wrmces instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
+// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
+// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
+// MCES<3> <- R16<3> (DPC)
+// MCES<4> <- R16<4> (DSC)
+//
+//-
+
+ CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
+Call_Pal_Wrmces:
+ and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
+ mfpr r14, pt_mces // Get current value
+
+ ornot r31, r13, r13 // Flip all the bits
+ and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
+
+ and r14, r13, r1 // Update MCHK, SCE, PCE
+ bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
+
+ or r1, r17, r1 // Update DPC and DSC
+ mtpr r1, pt_mces // Write MCES back
+
+#if rawhide_system == 0
+ nop // Pad to fix PT write->read restriction
+#else
+ blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
+#endif
+
+ nop
+ hw_rei
+
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_PRIV(0x0012)
+CallPal_OpcDec12:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0013)
+CallPal_OpcDec13:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0014)
+CallPal_OpcDec14:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0015)
+CallPal_OpcDec15:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0016)
+CallPal_OpcDec16:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0017)
+CallPal_OpcDec17:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0018)
+CallPal_OpcDec18:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0019)
+CallPal_OpcDec19:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001A)
+CallPal_OpcDec1A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001B)
+CallPal_OpcDec1B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001C)
+CallPal_OpcDec1C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001D)
+CallPal_OpcDec1D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001E)
+CallPal_OpcDec1E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x001F)
+CallPal_OpcDec1F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0020)
+CallPal_OpcDec20:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0021)
+CallPal_OpcDec21:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0022)
+CallPal_OpcDec22:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0023)
+CallPal_OpcDec23:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0024)
+CallPal_OpcDec24:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0025)
+CallPal_OpcDec25:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0026)
+CallPal_OpcDec26:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0027)
+CallPal_OpcDec27:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0028)
+CallPal_OpcDec28:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x0029)
+CallPal_OpcDec29:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002A)
+CallPal_OpcDec2A:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrfen - PALcode for wrfen instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// a0<0> -> ICSR<FPE>
+// Store new FEN in PCB
+// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
+//
+// Issue: What about pending FP loads when FEN goes from on->off????
+//-
+
+ CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
+Call_Pal_Wrfen:
+ or r31, 1, r13 // Get a one
+ mfpr r1, ev5__icsr // Get current FPE
+
+ sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
+ and r16, 1, r16 // clean new fen
+
+ sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
+ bic r1, r13, r1 // zero icsr<fpe>
+
+ or r1, r12, r1 // Or new FEN into ICSR
+ mfpr r12, pt_pcbb // Get PCBB - E1
+
+ mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
+ stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
+
+ mfpr r31, pt0 // Pad ICSR<FPE> write.
+ mfpr r31, pt0
+
+ mfpr r31, pt0
+// pvc_violate 225 // cuz PVC can't distinguish which bits changed
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x002C)
+CallPal_OpcDec2C:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// vptptr <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
+Call_Pal_Wrvptptr:
+ mtpr r16, ev5__mvptbr // Load Mbox copy
+ mtpr r16, ev5__ivptbr // Load Ibox copy
+ nop // Pad IPR write
+ nop
+ hw_rei
+
+ CALL_PAL_PRIV(0x002E)
+CallPal_OpcDec2E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_PRIV(0x002F)
+CallPal_OpcDec2F:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "swpctx- PALcode for swpctx instruction"
+
+//+
+//
+// Entry:
+// hardware dispatch via callPal instruction
+// R16 -> new pcb
+//
+// Function:
+// dynamic state moved to old pcb
+// new state loaded from new pcb
+// pcbb pointer set
+// old pcbb returned in R0
+//
+// Note: need to add perf monitor stuff
+//-
+
+ CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
+Call_Pal_Swpctx:
+ rpcc r13 // get cyccounter
+ mfpr r0, pt_pcbb // get pcbb
+
+ ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
+ ldqp r23, osfpcb_l_cc(r16) // get new asn
+
+ srl r13, 32, r25 // move offset
+ mfpr r24, pt_usp // get usp
+
+ stqp r30, osfpcb_q_ksp(r0) // store old ksp
+// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
+ mtpr r16, pt_pcbb // set new pcbb
+
+ stqp r24, osfpcb_q_usp(r0) // store usp
+ addl r13, r25, r25 // merge for new time
+
+ stlp r25, osfpcb_l_cc(r0) // save time
+ ldah r24, (1<<(icsr_v_fpe-16))(r31)
+
+ and r22, 1, r12 // isolate fen
+ mfpr r25, icsr // get current icsr
+
+ ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
+ br r31, swpctx_cont
+
+// .sbttl "wrval - PALcode for wrval instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// sysvalue <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
+Call_Pal_Wrval:
+ nop
+ mtpr r16, pt_sysval // Pad paltemp write
+ nop
+ nop
+ hw_rei
+
+
+// .sbttl "rdval - PALcode for rdval instruction"
+
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- sysvalue
+//-
+
+ CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
+Call_Pal_Rdval:
+ nop
+ mfpr r0, pt_sysval
+ nop
+ hw_rei
+
+// .sbttl "tbi - PALcode for tbi instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// TB invalidate
+// r16/a0 = TBI type
+// r17/a1 = Va for TBISx instructions
+//-
+
+ CALL_PAL_PRIV(PAL_TBI_ENTRY)
+Call_Pal_Tbi:
+ addq r16, 2, r16 // change range to 0-2
+ br r23, CALL_PAL_tbi_10_ // get our address
+
+CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
+ lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
+ sll r16, 4, r16 // * 16
+ blbc r22, CALL_PAL_tbi_30_ // go rei, if not
+
+ addq r23, r16, r23 // addr of our code
+//orig pvc_jsr tbi
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_tbi_30_:
+ hw_rei
+ nop
+
+// .sbttl "wrent - PALcode for wrent instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Update ent* in paltemps
+// r16/a0 = Address of entry routine
+// r17/a1 = Entry Number 0..5
+//
+// r22, r23 trashed
+//-
+
+ CALL_PAL_PRIV(PAL_WRENT_ENTRY)
+Call_Pal_Wrent:
+ cmpult r17, 6, r22 // see if in range
+ br r23, CALL_PAL_wrent_10_ // get our address
+
+CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
+ blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
+
+ lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
+ sll r17, 4, r17 // *16
+
+ addq r17, r23, r23 // Get address in table
+//orig pvc_jsr wrent
+ jmp r31, (r23) // and go do it
+
+CALL_PAL_wrent_30_:
+ hw_rei // out of range, just return
+
+// .sbttl "swpipl - PALcode for swpipl instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- PS<IPL>
+// PS<IPL> <- a0<2:0> (r16)
+//
+// t8 (r22) is scratch
+//-
+
+ CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
+Call_Pal_Swpipl:
+ and r16, osfps_m_ipl, r16 // clean New ipl
+ mfpr r22, pt_intmask // get int mask
+
+ extbl r22, r16, r22 // get mask for this ipl
+ bis r11, r31, r0 // return old ipl
+
+ bis r16, r31, r11 // set new ps
+ mtpr r22, ev5__ipl // set new mask
+
+ mfpr r31, pt0 // pad ipl write
+ mfpr r31, pt0 // pad ipl write
+
+ hw_rei // back
+
+// .sbttl "rdps - PALcode for rdps instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- ps
+//-
+
+ CALL_PAL_PRIV(PAL_RDPS_ENTRY)
+Call_Pal_Rdps:
+ bis r11, r31, r0 // Fetch PALshadow PS
+ nop // Must be 2 cycles long
+ hw_rei
+
+// .sbttl "wrkgp - PALcode for wrkgp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// kgp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
+Call_Pal_Wrkgp:
+ nop
+ mtpr r16, pt_kgp
+ nop // Pad for pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrusp - PALcode for wrusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// usp <- a0 (r16)
+//-
+
+ CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
+Call_Pal_Wrusp:
+ nop
+ mtpr r16, pt_usp
+ nop // Pad possible pt write->read restriction
+ nop
+ hw_rei
+
+// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+//
+// Function:
+// Various control functions for the onchip performance counters
+//
+// option selector in r16
+// option argument in r17
+// returned status in r0
+//
+//
+// r16 = 0 Disable performance monitoring for one or more cpu's
+// r17 = 0 disable no counters
+// r17 = bitmask disable counters specified in bit mask (1=disable)
+//
+// r16 = 1 Enable performance monitoring for one or more cpu's
+// r17 = 0 enable no counters
+// r17 = bitmask enable counters specified in bit mask (1=enable)
+//
+// r16 = 2 Mux select for one or more cpu's
+// r17 = Mux selection (cpu specific)
+// <24:19> bc_ctl<pm_mux_sel> field (see spec)
+// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
+//
+// r16 = 3 Options
+// r17 = (cpu specific)
+// <0> = 0 log all processes
+// <0> = 1 log only selected processes
+// <30,9,8> mode select - ku,kp,kk
+//
+// r16 = 4 Interrupt frequency select
+// r17 = (cpu specific) indicates interrupt frequencies desired for each
+// counter, with "zero interrupts" being an option
+// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
+//
+// r16 = 5 Read Counters
+// r17 = na
+// r0 = value (same format as ev5 pmctr)
+// <0> = 0 Read failed
+// <0> = 1 Read succeeded
+//
+// r16 = 6 Write Counters
+// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
+//
+// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
+// r17 = 0 enable no counters
+// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
+//
+//=============================================================================
+//Assumptions:
+//PMCTR_CTL:
+//
+// <15:14> CTL0 -- encoded frequency select and enable - CTR0
+// <13:12> CTL1 -- " - CTR1
+// <11:10> CTL2 -- " - CTR2
+//
+// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
+// <7:6> FRQ1 -- frequency select for CTR1
+// <5:4> FRQ2 -- frequency select for CTR2
+//
+// <0> all vs. select processes (0=all,1=select)
+//
+// where
+// FRQx<1:0>
+// 0 1 disable interrupt
+// 1 0 frequency = 65536 (16384 for ctr2)
+// 1 1 frequency = 256
+// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
+//
+//=============================================================================
+//
+ CALL_PAL_PRIV(0x0039)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_Wrperfmon:
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+ cmpeq r16, 1, r0 // check for enable
+ bne r0, perfmon_en // br if requested to enable
+
+ cmpeq r16, 2, r0 // check for mux ctl
+ bne r0, perfmon_muxctl // br if request to set mux controls
+
+ cmpeq r16, 3, r0 // check for options
+ bne r0, perfmon_ctl // br if request to set options
+
+ cmpeq r16, 4, r0 // check for interrupt frequency select
+ bne r0, perfmon_freq // br if request to change frequency select
+
+ cmpeq r16, 5, r0 // check for counter read request
+ bne r0, perfmon_rd // br if request to read counters
+
+ cmpeq r16, 6, r0 // check for counter write request
+ bne r0, perfmon_wr // br if request to write counters
+
+ cmpeq r16, 7, r0 // check for counter clear/enable request
+ bne r0, perfmon_enclr // br if request to clear/enable counters
+
+ beq r16, perfmon_dis // br if requested to disable (r16=0)
+ br r31, perfmon_unknown // br if unknown request
+#else
+
+ br r31, pal_perfmon_debug
+#endif
+
+// .sbttl "rdusp - PALcode for rdusp instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- usp
+//-
+
+ CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
+Call_Pal_Rdusp:
+ nop
+ mfpr r0, pt_usp
+ hw_rei
+
+
+ CALL_PAL_PRIV(0x003B)
+CallPal_OpcDec3B:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "whami - PALcode for whami instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- whami
+//-
+ CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
+Call_Pal_Whami:
+ nop
+ mfpr r0, pt_whami // Get Whami
+ extbl r0, 1, r0 // Isolate just whami bits
+ hw_rei
+
+// .sbttl "retsys - PALcode for retsys instruction"
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+// 00(sp) contains return pc
+// 08(sp) contains r29
+//
+// Function:
+// Return from system call.
+// mode switched from kern to user.
+// stacks swapped, ugp, upc restored.
+// r23, r25 junked
+//-
+
+ CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
+Call_Pal_Retsys:
+ lda r25, osfsf_c_size(sp) // pop stack
+ bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save exc_addr in case of fault
+ ldq r23, osfsf_pc(sp) // get pc
+
+ ldq r29, osfsf_gp(sp) // get gp
+ stl_c r31, -4(sp) // clear lock_flag
+
+ lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
+ mfpr r30, pt_usp // get users stack
+
+ bic r23, 3, r23 // clean return pc
+ mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
+
+ mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
+ mtpr r25, pt_ksp // save kern stack
+
+ rc r31 // clear inter_flag
+// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
+ hw_rei_spe // and back
+
+
+ CALL_PAL_PRIV(0x003E)
+CallPal_OpcDec3E:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rti - PALcode for rti instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// 00(sp) -> ps
+// 08(sp) -> pc
+// 16(sp) -> r29 (gp)
+// 24(sp) -> r16 (a0)
+// 32(sp) -> r17 (a1)
+// 40(sp) -> r18 (a3)
+//-
+
+ CALL_PAL_PRIV(PAL_RTI_ENTRY)
+#ifdef SIMOS
+ /* called once by platform_tlaser */
+ .globl Call_Pal_Rti
+#endif
+Call_Pal_Rti:
+ lda r25, osfsf_c_size(sp) // get updated sp
+ bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
+
+ mfpr r14, exc_addr // save PC in case of fault
+ rc r31 // clear intr_flag
+
+ ldq r12, -6*8(r25) // get ps
+ ldq r13, -5*8(r25) // pc
+
+ ldq r18, -1*8(r25) // a2
+ ldq r17, -2*8(r25) // a1
+
+ ldq r16, -3*8(r25) // a0
+ ldq r29, -4*8(r25) // gp
+
+ bic r13, 3, r13 // clean return pc
+ stl_c r31, -4(r25) // clear lock_flag
+
+ and r12, osfps_m_mode, r11 // get mode
+ mtpr r13, exc_addr // set return address
+
+ beq r11, rti_to_kern // br if rti to Kern
+ br r31, rti_to_user // out of call_pal space
+
+
+// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
+// .sbttl "bpt- PALcode for bpt instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ .text 1
+// . = 0x3000
+ CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
+Call_Pal_Bpt:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bpt_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bpt, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "bugchk- PALcode for bugchk instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
+Call_Pal_Bugchk:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_bugchk_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_bugchk, r16 // set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+ CALL_PAL_UNPRIV(0x0082)
+CallPal_OpcDec82:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "callsys - PALcode for callsys instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Switch mode to kernel and build a callsys stack frame.
+// sp = ksp
+// gp = kgp
+// t8 - t10 (r22-r24) trashed
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
+Call_Pal_Callsys:
+
+ and r11, osfps_m_mode, r24 // get mode
+ mfpr r22, pt_ksp // get ksp
+
+ beq r24, sys_from_kern // sysCall from kern is not allowed
+ mfpr r12, pt_entsys // get address of callSys routine
+
+//+
+// from here on we know we are in user going to Kern
+//-
+ mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
+ mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
+
+ bis r31, r31, r11 // PS=0 (mode=kern)
+ mfpr r23, exc_addr // get pc
+
+ mtpr r30, pt_usp // save usp
+ lda sp, 0-osfsf_c_size(r22)// set new sp
+
+ stq r29, osfsf_gp(sp) // save user gp/r29
+ stq r24, osfsf_ps(sp) // save ps
+
+ stq r23, osfsf_pc(sp) // save pc
+ mtpr r12, exc_addr // set address
+ // 1 cycle to hw_rei
+
+ mfpr r29, pt_kgp // get the kern gp/r29
+
+ hw_rei_spe // and off we go!
+
+
+ CALL_PAL_UNPRIV(0x0084)
+CallPal_OpcDec84:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0085)
+CallPal_OpcDec85:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "imb - PALcode for imb instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Flush the writebuffer and flush the Icache
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
+Call_Pal_Imb:
+ mb // Clear the writebuffer
+ mfpr r31, ev5__mcsr // Sync with clear
+ nop
+ nop
+ br r31, pal_ic_flush // Flush Icache
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x0087)
+CallPal_OpcDec87:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0088)
+CallPal_OpcDec88:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0089)
+CallPal_OpcDec89:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008A)
+CallPal_OpcDec8A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008B)
+CallPal_OpcDec8B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008C)
+CallPal_OpcDec8C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008D)
+CallPal_OpcDec8D:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008E)
+CallPal_OpcDec8E:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x008F)
+CallPal_OpcDec8F:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0090)
+CallPal_OpcDec90:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0091)
+CallPal_OpcDec91:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0092)
+CallPal_OpcDec92:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0093)
+CallPal_OpcDec93:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0094)
+CallPal_OpcDec94:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0095)
+CallPal_OpcDec95:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0096)
+CallPal_OpcDec96:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0097)
+CallPal_OpcDec97:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0098)
+CallPal_OpcDec98:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x0099)
+CallPal_OpcDec99:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009A)
+CallPal_OpcDec9A:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009B)
+CallPal_OpcDec9B:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009C)
+CallPal_OpcDec9C:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x009D)
+CallPal_OpcDec9D:
+ br r31, osfpal_calpal_opcdec
+
+// .sbttl "rdunique - PALcode for rdunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// v0 (r0) <- unique
+//
+//-
+//
+ CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
+CALL_PALrdunique_:
+ mfpr r0, pt_pcbb // get pcb pointer
+ ldqp r0, osfpcb_q_unique(r0) // get new value
+
+ hw_rei
+
+// .sbttl "wrunique - PALcode for wrunique instruction"
+//+
+//
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// unique <- a0 (r16)
+//
+//-
+//
+CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
+CALL_PAL_Wrunique:
+ nop
+ mfpr r12, pt_pcbb // get pcb pointer
+ stqp r16, osfpcb_q_unique(r12)// get new value
+ nop // Pad palshadow write
+ hw_rei // back
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00A0)
+CallPal_OpcDecA0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A1)
+CallPal_OpcDecA1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A2)
+CallPal_OpcDecA2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A3)
+CallPal_OpcDecA3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A4)
+CallPal_OpcDecA4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A5)
+CallPal_OpcDecA5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A6)
+CallPal_OpcDecA6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A7)
+CallPal_OpcDecA7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A8)
+CallPal_OpcDecA8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00A9)
+CallPal_OpcDecA9:
+ br r31, osfpal_calpal_opcdec
+
+
+// .sbttl "gentrap - PALcode for gentrap instruction"
+//+
+// CALL_PAL_gentrap:
+// Entry:
+// Vectored into via hardware PALcode instruction dispatch.
+//
+// Function:
+// Build stack frame
+// a0 <- code
+// a1 <- unpred
+// a2 <- unpred
+// vector via entIF
+//
+//-
+
+ CALL_PAL_UNPRIV(0x00AA)
+// unsupported in Hudson code .. pboyle Nov/95
+CALL_PAL_gentrap:
+ sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ bis r11, r31, r12 // Save PS for stack write
+ bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
+
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r30, pt_usp // save user stack
+
+ bis r31, r31, r11 // Set new PS
+ mfpr r30, pt_ksp
+
+CALL_PAL_gentrap_10_:
+ lda sp, 0-osfsf_c_size(sp)// allocate stack space
+ mfpr r14, exc_addr // get pc
+
+ stq r16, osfsf_a0(sp) // save regs
+ bis r31, osf_a0_gentrap, r16// set a0
+
+ stq r17, osfsf_a1(sp) // a1
+ br r31, bpt_bchk_common // out of call_pal space
+
+
+// .sbttl "CALL_PAL OPCDECs"
+
+ CALL_PAL_UNPRIV(0x00AB)
+CallPal_OpcDecAB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AC)
+CallPal_OpcDecAC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AD)
+CallPal_OpcDecAD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AE)
+CallPal_OpcDecAE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00AF)
+CallPal_OpcDecAF:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B0)
+CallPal_OpcDecB0:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B1)
+CallPal_OpcDecB1:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B2)
+CallPal_OpcDecB2:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B3)
+CallPal_OpcDecB3:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B4)
+CallPal_OpcDecB4:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B5)
+CallPal_OpcDecB5:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B6)
+CallPal_OpcDecB6:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B7)
+CallPal_OpcDecB7:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B8)
+CallPal_OpcDecB8:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00B9)
+CallPal_OpcDecB9:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BA)
+CallPal_OpcDecBA:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BB)
+CallPal_OpcDecBB:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BC)
+CallPal_OpcDecBC:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BD)
+CallPal_OpcDecBD:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BE)
+CallPal_OpcDecBE:
+ br r31, osfpal_calpal_opcdec
+
+ CALL_PAL_UNPRIV(0x00BF)
+CallPal_OpcDecBF:
+ // MODIFIED BY EGH 2/25/04
+ br r31, copypal_impl
+
+
+/*======================================================================*/
+/* OSF/1 CALL_PAL CONTINUATION AREA */
+/*======================================================================*/
+
+ .text 2
+
+ . = 0x4000
+
+
+// .sbttl "Continuation of MTPR_PERFMON"
+ ALIGN_BLOCK
+#if perfmon_debug == 0
+ // "real" performance monitoring code
+// mux ctl
+perfmon_muxctl:
+ lda r8, 1(r31) // get a 1
+ sll r8, pmctr_v_sel0, r8 // move to sel0 position
+ or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
+ and r17, r8, r25 // isolate pmctr mux select bits
+ mfpr r0, ev5__pmctr
+ bic r0, r8, r0 // clear old mux select bits
+ or r0,r25, r25 // or in new mux select bits
+ mtpr r25, ev5__pmctr
+
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, bc_ctl_v_pm_mux_sel, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+// adapted from ev5_pal_macros.mar
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+ br r31, perfmon_success
+
+
+// requested to disable perf monitoring
+perfmon_dis:
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+perfmon_dis_ctr0: // and begin with ctr0
+ blbc r17, perfmon_dis_ctr1 // do not disable ctr0
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl0, r8
+ bic r14, r8, r14 // disable ctr0
+perfmon_dis_ctr1:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_ctr2 // do not disable ctr1
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl1, r8
+ bic r14, r8, r14 // disable ctr1
+perfmon_dis_ctr2:
+ srl r17, 1, r17
+ blbc r17, perfmon_dis_update // do not disable ctr2
+ lda r8, 3(r31)
+ sll r8, pmctr_v_ctl2, r8
+ bic r14, r8, r14 // disable ctr2
+perfmon_dis_update:
+ mtpr r14, ev5__pmctr // update pmctr ipr
+//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
+// adapted from ev5_pal_macros.mar
+//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
+
+ lda r17, 0x3F(r31) // build mask
+ sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
+ and r14, r17, r14 // isolate ctl bits
+ bic r8, r17, r8 // clear out old ctl bits
+ or r14, r8, r14 // create shadow ctl bits
+//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
+//adjusted impure pointer still in r25
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
+
+ br r31, perfmon_success
+
+
+// requested to enable perf monitoring
+//;the following code can be greatly simplified for pass2, but should work fine as is.
+
+
+perfmon_enclr:
+ lda r9, 1(r31) // set enclr flag
+ br perfmon_en_cont
+
+perfmon_en:
+ bis r31, r31, r9 // clear enclr flag
+
+perfmon_en_cont:
+ mfpr r8, pt_pcbb // get PCB base
+//orig get_pmctr_ctl r25, r25
+ mfpr r25, pt_impure
+ lda r25, CNS_Q_IPR(r25)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
+
+ ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
+ mfpr r14, ev5__pmctr // read ibox pmctr ipr
+ srl r16, osfpcb_v_pme, r16 // get pme bit
+ mfpr r13, icsr
+ and r16, 1, r16 // isolate pme bit
+
+ // this code only needed in pass2 and later
+//orig sget_addr r12, 1<<icsr_v_pmp, r31
+ lda r12, 1<<icsr_v_pmp(r31) // pb
+ bic r13, r12, r13 // clear pmp bit
+ sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
+ or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
+ ev5_pass2 mtpr r13, icsr // update icsr
+
+#if ev5_p1 != 0
+ lda r12, 1(r31)
+ cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
+#else
+ bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
+#endif
+
+ sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
+ bis r14, r31, r13 // copy pmctr
+
+perfmon_en_ctr0: // and begin with ctr0
+ blbc r17, perfmon_en_ctr1 // do not enable ctr0
+
+ blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr0<15:0> mask
+ sll r8, pmctr_v_ctr0, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr0:
+//orig get_addr r8, 3<<pmctr_v_ctl0, r31
+ LDLI(r8, (3<<pmctr_v_ctl0))
+ and r25, r8, r12 //isolate frequency select bits for ctr0
+ bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl0 bits
+
+perfmon_en_ctr1: // enable ctr1
+ srl r17, 1, r17 // get ctr1 enable
+ blbc r17, perfmon_en_ctr2 // do not enable ctr1
+
+ blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
+ lda r8, 0xffff(r31)
+ zapnot r8, 3, r8 // ctr1<15:0> mask
+ sll r8, pmctr_v_ctr1, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr1:
+//orig get_addr r8, 3<<pmctr_v_ctl1, r31
+ LDLI(r8, (3<<pmctr_v_ctl1))
+ and r25, r8, r12 //isolate frequency select bits for ctr1
+ bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl1 bits
+
+perfmon_en_ctr2: // enable ctr2
+ srl r17, 1, r17 // get ctr2 enable
+ blbc r17, perfmon_en_return // do not enable ctr2 - return
+
+ blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+ bic r14, r8, r14 // clear ctr bits
+ bic r13, r8, r13 // clear ctr bits
+
+perfmon_en_noclr2:
+//orig get_addr r8, 3<<pmctr_v_ctl2, r31
+ LDLI(r8, (3<<pmctr_v_ctl2))
+ and r25, r8, r12 //isolate frequency select bits for ctr2
+ bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
+ or r14,r12,r14 // or in new ctl2 bits
+
+perfmon_en_return:
+ cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
+ // else only do the counter clears
+ mtpr r13, ev5__pmctr // update pmctr ipr
+
+//;this code not needed for pass2 and later, but does not hurt to leave it in
+ lda r8, 0x3F(r31)
+//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
+
+ sll r8, pmctr_v_ctl2, r8 // build ctl mask
+ and r8, r14, r14 // isolate new ctl bits
+ bic r25, r8, r25 // clear out old ctl value
+ or r25, r14, r14 // create new pmctr_ctl
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+
+// options...
+perfmon_ctl:
+
+// set mode
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
+ LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
+ mfpr r0, ev5__pmctr
+ and r17, r8, r25 // isolate pmctr mode bits
+ bic r0, r8, r0 // clear old mode bits
+ or r0, r25, r25 // or in new mode bits
+ mtpr r25, ev5__pmctr
+
+//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
+ mfpr r8, icsr
+ lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
+ bic r8, r25, r8 // clear old pma bit
+ cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
+ or r8, r25, r8
+ ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
+ mfpr r31, pt0 // pad icsr write
+ mfpr r31, pt0 // pad icsr write
+
+//;the following code not needed for pass2 and later, but should work anyway.
+ bis r14, 1, r14 // set for select processes
+ blbs r17, perfmon_sp // branch if select processes
+ bic r14, 1, r14 // all processes
+perfmon_sp:
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+ br r31, perfmon_success
+
+// counter frequency select
+perfmon_freq:
+//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
+ mfpr r12, pt_impure
+ lda r12, CNS_Q_IPR(r12)
+ RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
+
+ lda r8, 0x3F(r31)
+//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
+// I guess this should be a shift of 4 bits from the above control register structure .. pb
+#define pmctr_ctl_v_frq2_SHIFT 4
+ sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
+
+ and r8, r17, r17
+ bic r14, r8, r14 // clear out old frequency select bits
+
+ or r17, r14, r14 // or in new frequency select info
+//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
+ SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
+
+ br r31, perfmon_success
+
+// read counters
+perfmon_rd:
+ mfpr r0, ev5__pmctr
+ or r0, 1, r0 // or in return status
+ hw_rei // back to user
+
+// write counters
+perfmon_wr:
+ mfpr r14, ev5__pmctr
+ lda r8, 0x3FFF(r31) // ctr2<13:0> mask
+ sll r8, pmctr_v_ctr2, r8
+
+//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
+ LDLI(r9, (0xFFFFFFFF))
+ sll r9, pmctr_v_ctr1, r9
+ or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
+ bic r14, r8, r14 // clear ctr fields
+ and r17, r8, r25 // clear all but ctr fields
+ or r25, r14, r14 // write ctr fields
+ mtpr r14, ev5__pmctr // update pmctr ipr
+
+ mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
+
+perfmon_success:
+ or r31, 1, r0 // set success
+ hw_rei // back to user
+
+perfmon_unknown:
+ or r31, r31, r0 // set fail
+ hw_rei // back to user
+
+#else
+
+// end of "real code", start of debug code
+
+//+
+// Debug environment:
+// (in pass2, always set icsr<pma> to ensure master counter enable is on)
+// R16 = 0 Write to on-chip performance monitor ipr
+// r17 = on-chip ipr
+// r0 = return value of read of on-chip performance monitor ipr
+// R16 = 1 Setup Cbox mux selects
+// r17 = Cbox mux selects in same position as in bc_ctl ipr.
+// r0 = return value of read of on-chip performance monitor ipr
+//
+//-
+pal_perfmon_debug:
+ mfpr r8, icsr
+ lda r9, 1<<icsr_v_pma(r31)
+ bis r8, r9, r8
+ mtpr r8, icsr
+
+ mfpr r0, ev5__pmctr // read old value
+ bne r16, cbox_mux_sel
+
+ mtpr r17, ev5__pmctr // update pmctr ipr
+ br r31, end_pm
+
+cbox_mux_sel:
+ // ok, now tackle cbox mux selects
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+//orig get_bc_ctl_shadow r16 // bc_ctl returned
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
+
+ lda r8, 0x3F(r31) // build mux select mask
+ sll r8, BC_CTL_V_PM_MUX_SEL, r8
+
+ and r17, r8, r25 // isolate bc_ctl mux select bits
+ bic r16, r8, r16 // isolate old mux select bits
+ or r16, r25, r25 // create new bc_ctl
+ mb // clear out cbox for future ipr write
+ stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
+ mb // clear out cbox for future ipr write
+//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
+ mfpr r16, pt_impure
+ lda r16, CNS_Q_IPR(r16)
+ SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
+
+end_pm: hw_rei
+
+#endif
+
+
+//;The following code is a workaround for a cpu bug where Istream prefetches to
+//;super-page address space in user mode may escape off-chip.
+#if spe_fix != 0
+
+ ALIGN_BLOCK
+hw_rei_update_spe:
+ mfpr r12, pt_misc // get previous mode
+ srl r11, osfps_v_mode, r10 // isolate current mode bit
+ and r10, 1, r10
+ extbl r12, 7, r8 // get previous mode field
+ and r8, 1, r8 // isolate previous mode bit
+ cmpeq r10, r8, r8 // compare previous and current modes
+ beq r8, hw_rei_update_spe_5_
+ hw_rei // if same, just return
+
+hw_rei_update_spe_5_:
+
+#if fill_err_hack != 0
+
+ fill_error_hack
+#endif
+
+ mfpr r8, icsr // get current icsr value
+ ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
+ bic r8, r9, r8 // disable spe
+ xor r10, 1, r9 // flip mode for new spe bit
+ sll r9, icsr_v_spe+1, r9 // shift into position
+ bis r8, r9, r8 // enable/disable spe
+ lda r9, 1(r31) // now update our flag
+ sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
+ bic r12, r9, r12 // clear saved previous mode
+ sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
+ bis r12, r9, r12 // set saved current mode
+ mtpr r12, pt_misc // update pt_misc
+ mtpr r8, icsr // update icsr
+
+#if osf_chm_fix != 0
+
+
+ blbc r10, hw_rei_update_spe_10_ // branch if not user mode
+
+ mb // ensure no outstanding fills
+ lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
+ mtpr r12, dc_mode // Turn on dcache
+ mtpr r31, dc_flush // and flush it
+ br r31, pal_ic_flush
+
+hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
+ ldqp r9, osfpcb_q_Fen(r9) // get FEN
+ blbc r9, pal_ic_flush // return if FP disabled
+ mb // ensure no outstanding fills
+ mtpr r31, dc_mode // turn off dcache
+#endif
+
+
+ br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
+#endif
+
+
+copypal_impl:
+ mov r16, r0
+ bic r18, 63, r8
+ and r18, 63, r18
+ beq r8, cache_copy_done
+cache_loop:
+ ldf f17, 0(r16)
+ stf f17, 0(r16)
+ addq r17, 64, r17
+ addq r16, 64, r16
+ subq r8, 64, r8
+ bne r8, cache_loop
+cache_copy_done:
+ ble r18, finished #if len <=0 we are finished
+ ldq_u r8, 0(r17)
+ xor r17, r16, r9
+ and r9, 7, r9
+ and r16, 7, r10
+ bne r9, unaligned
+ beq r10, aligned
+ ldq_u r9, 0(r16)
+ addq r18, r10, r18
+ mskqh r8, r17, r8
+ mskql r9, r17, r9
+ bis r8, r9, r8
+aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, aligned_done
+loop:
+ stq_u r8, 0(r16)
+ ldq_u r8, 8(r17)
+ subq r10, 8, r10
+ lda r16,8(r16)
+ lda r17,8(r17)
+ bne r10, loop
+aligned_done:
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+ few_left:
+ mskql r8, r18, r10
+ ldq_u r9, 0(r16)
+ mskqh r9, r18, r9
+ bis r10, r9, r10
+ stq_u r10, 0(r16)
+ br r31, finished
+unaligned:
+ addq r17, r18, r25
+ cmpule r18, 8, r9
+ bne r9, unaligned_few_left
+ beq r10, unaligned_dest_aligned
+ and r16, 7, r10
+ subq r31, r10, r10
+ addq r10, 8, r10
+ ldq_u r9, 7(r17)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r12
+ insql r12, r16, r12
+ ldq_u r13, 0(r16)
+ mskql r13, r16, r13
+ bis r12, r13, r12
+ stq_u r12, 0(r16)
+ addq r16, r10, r16
+ addq r17, r10, r17
+ subq r18, r10, r18
+ ldq_u r8, 0(r17)
+unaligned_dest_aligned:
+ subq r18, 1, r10
+ bic r10, 7, r10
+ and r18, 7, r18
+ beq r10, unaligned_partial_left
+unaligned_loop:
+ ldq_u r9, 7(r17)
+ lda r17, 8(r17)
+ extql r8, r17, r12
+ extqh r9, r17, r13
+ subq r10, 8, r10
+ bis r12, r13, r13
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ beq r10, unaligned_second_partial_left
+ ldq_u r8, 7(r17)
+ lda r17, 8(r17)
+ extql r9, r17, r12
+ extqh r8, r17, r13
+ bis r12, r13, r13
+ subq r10, 8, r10
+ stq r13, 0(r16)
+ lda r16, 8(r16)
+ bne r10, unaligned_loop
+unaligned_partial_left:
+ mov r8, r9
+unaligned_second_partial_left:
+ ldq_u r8, -1(r25)
+ extql r9, r17, r9
+ extqh r8, r17, r8
+ bis r8, r9, r8
+ bne r18, few_left
+ stq_u r8, 0(r16)
+ br r31, finished
+unaligned_few_left:
+ ldq_u r9, -1(r25)
+ extql r8, r17, r8
+ extqh r9, r17, r9
+ bis r8, r9, r8
+ insqh r8, r16, r9
+ insql r8, r16, r8
+ lda r12, -1(r31)
+ mskql r12, r18, r13
+ cmovne r13, r13, r12
+ insqh r12, r16, r13
+ insql r12, r16, r12
+ addq r16, r18, r10
+ ldq_u r14, 0(r16)
+ ldq_u r25, -1(r10)
+ bic r14, r12, r14
+ bic r25, r13, r25
+ and r8, r12, r8
+ and r9, r13, r9
+ bis r8, r14, r8
+ bis r9, r25, r9
+ stq_u r9, -1(r10)
+ stq_u r8, 0(r16)
+finished:
+ hw_rei
diff --git a/system/alpha/palcode/osfpal_cache_copy_unaligned.s b/system/alpha/palcode/osfpal_cache_copy_unaligned.s
deleted file mode 100644
index e60c3ccfc..000000000
--- a/system/alpha/palcode/osfpal_cache_copy_unaligned.s
+++ /dev/null
@@ -1,5253 +0,0 @@
-// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
-// since we don't have a mechanism to expand the data structures.... pb Nov/95
-
-// build_fixed_image: not sure what means
-// real_mm to be replaced during rewrite
-// remove_save_state remove_restore_state can be remooved to save space ??
-
-
-#include "ev5_defs.h"
-#include "ev5_impure.h"
-#include "ev5_alpha_defs.h"
-#include "ev5_paldef.h"
-#include "ev5_osfalpha_defs.h"
-#include "fromHudsonMacros.h"
-#include "fromHudsonOsf.h"
-#include "dc21164FromGasSources.h"
-
-#ifdef SIMOS
-#define DEBUGSTORE(c) nop
-#else
-#define DEBUGSTORE(c) \
- lda r13, c(zero) ; \
- bsr r25, debugstore
-#endif
-
-#define DEBUG_EXC_ADDR()\
- bsr r25, put_exc_addr; \
- DEBUGSTORE(13) ; \
- DEBUGSTORE(10)
-
-#define egore 0
-#define acore 0
-#define beh_model 0
-#define ev5_p2 1
-#define ev5_p1 0
-#define ldvpte_bug_fix 1
-#define osf_chm_fix 0
-
-// Do we want to do this?? pb
-#define spe_fix 0
-// Do we want to do this?? pb
-#define build_fixed_image 0
-
-#define ev5_pass2
-#define enable_p4_fixups 0
-#define osf_svmin 1
-#define enable_physical_console 0
-#define fill_err_hack 0
-#define icflush_on_tbix 0
-#define max_cpuid 1
-#define perfmon_debug 0
-#define rawhide_system 0
-#define rax_mode 0
-
-
-// This is the fix for the user-mode super page references causing the machine to crash.
-#if (spe_fix == 1) && (build_fixed_image==1)
-#define hw_rei_spe br r31, hw_rei_update_spe
-#else
-#define hw_rei_spe hw_rei
-#endif
-
-
-// redefine a few of the distribution-code names to match the Hudson gas names.
-// opcodes
-#define ldqp ldq_p
-#define stqp stq_p
-#define ldlp ldl_p
-#define stlp stl_p
-
-#define r0 $0
-#define r1 $1
-#define r2 $2
-#define r3 $3
-#define r4 $4
-#define r5 $5
-#define r6 $6
-#define r7 $7
-#define r8 $8
-#define r9 $9
-#define r10 $10
-#define r11 $11
-#define r12 $12
-#define r13 $13
-#define r14 $14
-#define r15 $15
-#define r16 $16
-#define r17 $17
-#define r18 $18
-#define r19 $19
-#define r20 $20
-#define r21 $21
-#define r22 $22
-#define r23 $23
-#define r24 $24
-#define r25 $25
-#define r26 $26
-#define r27 $27
-#define r28 $28
-#define r29 $29
-#define r30 $30
-#define r31 $31
-
-// .title "EV5 OSF PAL"
-// .ident "V1.18"
-//
-//****************************************************************************
-//* *
-//* Copyright (c) 1992, 1993, 1994, 1995 *
-//* by DIGITAL Equipment Corporation, Maynard, Mass. *
-//* *
-//* This software is furnished under a license and may be used and copied *
-//* only in accordance with the terms of such license and with the *
-//* inclusion of the above copyright notice. This software or any other *
-//* copies thereof may not be provided or otherwise made available to any *
-//* other person. No title to and ownership of the software is hereby *
-//* transferred. *
-//* *
-//* The information in this software is subject to change without notice *
-//* and should not be construed as a commitment by DIGITAL Equipment *
-//* Corporation. *
-//* *
-//* DIGITAL assumes no responsibility for the use or reliability of its *
-//* software on equipment which is not supplied by DIGITAL. *
-//* *
-//****************************************************************************
-
-// .sbttl "Edit History"
-//+
-// Who Rev When What
-// ------------ --- ----------- --------------------------------
-// DB 0.0 03-Nov-1992 Start
-// DB 0.1 28-Dec-1992 add swpctx
-// DB 0.2 05-Jan-1993 Bug: PVC found mtpr dtb_CM -> virt ref bug
-// DB 0.3 11-Jan-1993 rearrange trap entry points
-// DB 0.4 01-Feb-1993 add tbi
-// DB 0.5 04-Feb-1993 real MM, kludge reset flow, kludge swppal
-// DB 0.6 09-Feb-1993 Bug: several stack pushers used r16 for pc (should be r14)
-// DB 0.7 10-Feb-1993 Bug: pushed wrong PC (+8) on CALL_PAL OPCDEC
-// Bug: typo on register number for store in wrunique
-// Bug: rti to kern uses r16 as scratch
-// Bug: callsys saving wrong value in pt_usp
-// DB 0.8 16-Feb-1993 PVC: fix possible pt write->read bug in wrkgp, wrusp
-// DB 0.9 18-Feb-1993 Bug: invalid_dpte_handler shifted pte twice
-// Bug: rti stl_c could corrupt the stack
-// Bug: unaligned returning wrong value in r17 (or should be and)
-// DB 0.10 19-Feb-1993 Add draina, rd/wrmces, cflush, cserve, interrupt
-// DB 0.11 23-Feb-1993 Turn caches on in reset flow
-// DB 0.12 10-Mar-1993 Bug: wrong value for icsr for FEN in kern mode flow
-// DB 0.13 15-Mar-1993 Bug: wrong value pushed for PC in invalid_dpte_handler if stack push tbmisses
-// DB 0.14 23-Mar-1993 Add impure pointer paltemp, reshuffle some other paltemps to match VMS
-// DB 0.15 15-Apr-1993 Combine paltemps for WHAMI and MCES
-// DB 0.16 12-May-1993 Update reset
-// New restriction: no mfpr exc_addr in cycle 1 of call_pal flows
-// Bug: in wrmces, not clearing DPC, DSC
-// Update swppal
-// Add pal bugchecks, pal_save_state, pal_restore_state
-// DB 0.17 24-May-1993 Add dfault_in_pal flow; fixup stack builder to have common state for pc/ps.
-// New restriction: No hw_rei_stall in 0,1,2 after mtpr itb_asn
-// DB 0.18 26-May-1993 PVC fixes
-// JM 0.19 01-jul-1993 Bug: OSFPAL_CALPAL_OPCDEC, TRAP_OPCDEC -- move mt exc_addr after stores
-// JM 0.20 07-jul-1993 Update cns_ and mchk_ names for impure.mar conversion to .sdl
-// Bug: exc_addr was being loaded before stores that could dtb_miss in the following
-// routines: TRAP_FEN,FEN_TO_OPCDEC,CALL_PAL_CALLSYS,RTI_TO_KERN
-// JM 0.21 26-jul-1993 Bug: move exc_addr load after ALL stores in the following routines:
-// TRAP_IACCVIO::,TRAP_OPCDEC::,TRAP_ARITH::,TRAP_FEN::
-// dfault_trap_cont:,fen_to_opcdec:,invalid_dpte_handler:
-// osfpal_calpal_opcdec:,CALL_PAL_callsys::,TRAP_UNALIGN::
-// Bugs from PVC: trap_unalign - mt pt0 ->mf pt0 within 2 cycles
-// JM 0.22 28-jul-1993 Add WRIPIR instruction
-// JM 0.23 05-aug-1993 Bump version number for release
-// JM 0.24 11-aug-1993 Bug: call_pal_swpipl - palshadow write -> hw_rei violation
-// JM 0.25 09-sep-1993 Disable certain "hidden" pvc checks in call_pals;
-// New restriction: No hw_rei_stall in 0,1,2,3,4 after mtpr itb_asn - affects HALT(raxmode),
-// and SWPCTX
-// JM 0.26 07-oct-1993 Re-implement pal_version
-// JM 0.27 12-oct-1993 One more time: change pal_version format to conform to SRM
-// JM 0.28 14-oct-1993 Change ic_flush routine to pal_ic_flush
-// JM 0.29 19-oct-1993 BUG(?): dfault_in_pal: use exc_addr to check for dtbmiss,itbmiss check instead
-// of mm_stat<opcode>. mm_stat contains original opcode, not hw_ld.
-// JM 0.30 28-oct-1993 BUG: PVC violation - mf exc_addr in first cycles of call_pal in rti,retsys
-// JM 0.31 15-nov-1993 BUG: WRFEN trashing r0
-// JM 0.32 21-nov-1993 BUG: dtb_ldq,itb_ldq (used in dfault_in_pal) not defined when real_mm=0
-// JM 0.33 24-nov-1993 save/restore_state -
-// BUG: use ivptbr to restore mvptbr
-// BUG: adjust hw_ld/st base/offsets to accomodate 10-bit offset limit
-// CHANGE: Load 2 pages into dtb to accomodate compressed logout area/multiprocessors
-// JM 0.34 20-dec-1993 BUG: set r11<mode> to kernel for ksnv halt case
-// BUG: generate ksnv halt when tb miss on kernel stack accesses
-// save exc_addr in r14 for invalid_dpte stack builder
-// JM 0.35 30-dec-1993 BUG: PVC violation in trap_arith - mt exc_sum in shadow of store with mf exc_mask in
-// the same shadow
-// JM 0.36 6-jan-1994 BUG: fen_to_opcdec - savePC should be PC+4, need to save old PS, update new PS
-// New palcode restiction: mt icsr<fpe,hwe> --> 3 bubbles to hw_rei --affects wrfen
-// JM 0.37 25-jan-1994 BUG: PVC violations in restore_state - mt dc_mode/maf_mode ->mbox instructions
-// Hide impure area manipulations in macros
-// BUG: PVC violation in save and restore state-- move mt icsr out of shadow of ld/st
-// Add some pvc_violate statements
-// JM 0.38 1-feb-1994 Changes to save_state: save pt1; don't save r31,f31; update comments to reflect reality;
-// Changes to restore_state: restore pt1, icsr; don't restore r31,f31; update comments
-// Add code to ensure fen bit set in icsr before ldt
-// conditionally compile rax_more_reset out.
-// move ldqp,stqp macro definitions to ev5_pal_macros.mar and add .mcall's for them here
-// move rax reset stuff to ev5_osf_system_pal.m64
-// JM 0.39 7-feb-1994 Move impure pointer to pal scratch space. Use former pt_impure for bc_ctl shadow
-// and performance monitoring bits
-// Change to save_state routine to save more iprs.
-// JM 0.40 19-feb-1994 Change algorithm in save/restore_state routines; add f31,r31 back in
-// JM 0.41 21-feb-1994 Add flags to compile out save/restore state (not needed in some systems)
-// remove_save_state,remove_restore_state;fix new pvc violation in save_state
-// JM 0.42 22-feb-1994 BUG: save_state overwriting r3
-// JM 0.43 24-feb-1994 BUG: save_state saving wrong icsr
-// JM 0.44 28-feb-1994 Remove ic_flush from wr_tbix instructions
-// JM 0.45 15-mar-1994 BUG: call_pal_tbi trashes a0 prior to range check (instruction order problem)
-// New pal restriction in pal_restore_state: icsr<fpe>->floating instr = 3 bubbles
-// Add exc_sum and exc_mask to pal_save_state (not restore)
-// JM 0.46 22-apr-1994 Move impure pointer back into paltemp; Move bc_ctl shadow and pmctr_ctl into impure
-// area.
-// Add performance counter support to swpctx and wrperfmon
-// JM 0.47 9-may-1994 Bump version # (for ev5_osf_system_pal.m64 sys_perfmon fix)
-// JM 0.48 13-jun-1994 BUG: trap_interrupt --> put new ev5 ipl at 30 for all osfipl6 interrupts
-// JM 0.49 8-jul-1994 BUG: In the unlikely (impossible?) event that the branch to pal_pal_bug_check is
-// taken in the interrupt flow, stack is pushed twice.
-// SWPPAL - update to support ECO 59 to allow 0 as a valid address
-// Add itb flush to save/restore state routines
-// Change hw_rei to hw_rei_stall in ic_flush routine. Shouldn't be necessary, but
-// conforms to itbia restriction.
-// Added enable_physical_console flag (for enter/exit console routines only)
-// JM 0.50 29-jul-1994 Add code to dfault & invalid_dpte_handler to ignore exceptions on a
-// load to r31/f31. changed dfault_fetch_err to dfault_fetch_ldr31_err and
-// nmiss_fetch_err to nmiss_fetch_ldr31_err.
-// JM 1.00 1-aug-1994 Add pass2 support (swpctx)
-// JM 1.01 2-aug-1994 swppal now passes bc_ctl/bc_config in r1/r2
-// JM 1.02 15-sep-1994 BUG: swpctx missing shift of pme bit to correct position in icsr (pass2)
-// Moved perfmon code here from system file.
-// BUG: pal_perfmon - enable function not saving correct enables when pme not set (pass1)
-// JM 1.03 3-oct-1994 Added (pass2 only) code to wrperfmon enable function to look at pme bit.
-// JM 1.04 14-oct-1994 BUG: trap_interrupt - ISR read (and saved) before INTID -- INTID can change
-// after ISR read, but we won't catch the ISR update. reverse order
-// JM 1.05 17-nov-1994 Add code to dismiss UNALIGN trap if LD r31/F31
-// JM 1.06 28-nov-1994 BUG: missing mm_stat shift for store case in trap_unalign (new bug due to "dismiss" code)
-// JM 1.07 1-dec-1994 EV5 PASS1,2,3 BUG WORKAROUND: Add flag LDVPTE_BUG_FIX. In DTBMISS_DOUBLE, branch to
-// DTBMISS_SINGLE if not in palmode.
-// JM 1.08 9-jan-1995 Bump version number for change to EV5_OSF_SYSTEM_PAL.M64 - ei_stat fix in mchk logout frame
-// JM 1.09 2-feb-1995 Add flag "spe_fix" and accompanying code to workaround pre-pass4 bug: Disable Ibox
-// superpage mode in User mode and re-enable in kernel mode.
-// EV5_OSF_SYSTEM_PAL.M64 and EV5_PALDEF.MAR (added pt_misc_v_cm) also changed to support this.
-// JM 1.10 24-feb-1995 Set ldvpte_bug_fix regardless of ev5 pass. set default to ev5_p2
-// ES 1.11 10-mar-1995 Add flag "osf_chm_fix" to enable dcache in user mode only to avoid
-// cpu bug.
-// JM 1.12 17-mar-1995 BUG FIX: Fix F0 corruption problem in pal_restore_state
-// ES 1.13 17-mar-1995 Refine osf_chm_fix
-// ES 1.14 20-mar-1995 Don't need as many stalls before hw_rei_stall in chm_fix
-// ES 1.15 21-mar-1995 Add a stall to avoid a pvc violation in pal_restore_state
-// Force pvc checking of exit_console
-// ES 1.16 26-apr-1995 In the wrperfmon disable function, correct meaning of R17<2:0> to ctl2,ctl2,ctl0
-// ES 1.17 01-may-1995 In hw_rei_update_spe code, in the osf_chm fix, use bic and bis (self-correcting)
-// instead of xor to maintain previous mode in pt_misc
-// ES 1.18 14-jul-1995 In wrperfmon enable on pass2, update pmctr even if current process does
-// not have pme set. The bits in icsr maintain the master enable state.
-// In sys_reset, add icsr<17>=1 for ev56 byte/word eco enable
-//
-#define vmaj 1
-#define vmin 18
-#define vms_pal 1
-#define osf_pal 2
-#define pal_type osf_pal
-#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))
-//-
-
-// .sbttl "PALtemp register usage"
-
-//+
-// The EV5 Ibox holds 24 PALtemp registers. This maps the OSF PAL usage
-// for these PALtemps:
-//
-// pt0 local scratch
-// pt1 local scratch
-// pt2 entUna pt_entUna
-// pt3 CPU specific impure area pointer pt_impure
-// pt4 memory management temp
-// pt5 memory management temp
-// pt6 memory management temp
-// pt7 entIF pt_entIF
-// pt8 intmask pt_intmask
-// pt9 entSys pt_entSys
-// pt10
-// pt11 entInt pt_entInt
-// pt12 entArith pt_entArith
-// pt13 reserved for system specific PAL
-// pt14 reserved for system specific PAL
-// pt15 reserved for system specific PAL
-// pt16 MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami, pt_mces
-// pt17 sysval pt_sysval
-// pt18 usp pt_usp
-// pt19 ksp pt_ksp
-// pt20 PTBR pt_ptbr
-// pt21 entMM pt_entMM
-// pt22 kgp pt_kgp
-// pt23 PCBB pt_pcbb
-//
-//-
-
-// .sbttl "PALshadow register usage"
-//
-//+
-//
-// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
-// This maps the OSF PAL usage of R8 - R14 and R25:
-//
-// r8 ITBmiss/DTBmiss scratch
-// r9 ITBmiss/DTBmiss scratch
-// r10 ITBmiss/DTBmiss scratch
-// r11 PS
-// r12 local scratch
-// r13 local scratch
-// r14 local scratch
-// r25 local scratch
-//
-//
-//-
-
-// .sbttl "ALPHA symbol definitions"
-// _OSF_PSDEF GLOBAL
-// _OSF_PTEDEF GLOBAL
-// _OSF_VADEF GLOBAL
-// _OSF_PCBDEF GLOBAL
-// _OSF_SFDEF GLOBAL
-// _OSF_MMCSR_DEF GLOBAL
-// _SCBDEF GLOBAL
-// _FRMDEF GLOBAL
-// _EXSDEF GLOBAL
-// _OSF_A0_DEF GLOBAL
-// _MCESDEF GLOBAL
-
-// .sbttl "EV5 symbol definitions"
-
-// _EV5DEF
-// _PALTEMP
-// _MM_STAT_DEF
-// _EV5_MM
-// _EV5_IPLDEF
-
-// _HALT_CODES GLOBAL
-// _MCHK_CODES GLOBAL
-
-// _PAL_IMPURE
-// _PAL_LOGOUT
-
-
-
-
-// .sbttl "PALcode configuration options"
-
-// There are a number of options that may be assembled into this version of
-// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
-// the following). The options that can be adjusted cause the resultant PALcode
-// to reflect the desired target system.
-
-
-#define osfpal 1 // This is the PALcode for OSF.
-
-#ifndef rawhide_system
-
-#define rawhide_system 0
-#endif
-
-
-#ifndef real_mm
-// Page table translation vs 1-1 mapping
-#define real_mm 1
-#endif
-
-
-#ifndef rax_mode
-
-#define rax_mode 0
-#endif
-
-#ifndef egore
-// End of reset flow starts a program at 200000(hex).
-#define egore 1
-#endif
-
-#ifndef acore
-// End of reset flow starts a program at 40000(hex).
-#define acore 0
-#endif
-
-
-// assume acore+egore+rax_mode lt 2 // Assertion checker
-
-#ifndef beh_model
-// EV5 behavioral model specific code
-#define beh_model 1
-#endif
-
-#ifndef init_cbox
-// Reset flow init of Bcache and Scache
-#define init_cbox 1
-#endif
-
-#ifndef disable_crd
-// Decides whether the reset flow will disable
-#define disable_crd 0
-#endif
-
- // correctable read interrupts via ICSR
-#ifndef perfmon_debug
-#define perfmon_debug 0
-#endif
-
-#ifndef icflush_on_tbix
-#define icflush_on_tbix 0
-#endif
-
-#ifndef remove_restore_state
-#define remove_restore_state 0
-#endif
-
-#ifndef remove_save_state
-#define remove_save_state 0
-#endif
-
-#ifndef enable_physical_console
-#define enable_physical_console 0
-#endif
-
-#ifndef ev5_p1
-#define ev5_p1 0
-#endif
-
-#ifndef ev5_p2
-#define ev5_p2 1
-#endif
-
-// assume ev5_p1+ev5_p2 eq 1
-
-#ifndef ldvpte_bug_fix
-#define ldvpte_bug_fix 1 // If set, fix ldvpte bug in dtbmiss_double flow.
-#endif
-
-#ifndef spe_fix
-// If set, disable super-page mode in user mode and re-enable
-#define spe_fix 0
-#endif
- // in kernel. Workaround for cpu bug.
-#ifndef build_fixed_image
-#define build_fixed_image 0
-#endif
-
-
-#ifndef fill_err_hack
-// If set, disable fill_error mode in user mode and re-enable
-#define fill_err_hack 0
-#endif
-
- // in kernel. Workaround for cpu bug.
-
-// .macro hw_rei_spe
-// .iif eq spe_fix, hw_rei
-//#if spe_fix != 0
-//
-//
-//#define hw_rei_chm_count hw_rei_chm_count + 1
-// p4_fixup_label \hw_rei_chm_count
-// .iif eq build_fixed_image, br r31, hw_rei_update_spe
-// .iif ne build_fixed_image, hw_rei
-//#endif
-//
-// .endm
-
-// Add flag "osf_chm_fix" to enable dcache in user mode only
-// to avoid cpu bug.
-
-#ifndef osf_chm_fix
-// If set, enable D-Cache in
-#define osf_chm_fix 0
-#endif
-
-#if osf_chm_fix != 0
-// user mode only.
-#define hw_rei_chm_count 0
-#endif
-
-#if osf_chm_fix != 0
-
-#define hw_rei_stall_chm_count 0
-#endif
-
-#ifndef enable_p4_fixups
-
-#define enable_p4_fixups 0
-#endif
-
- // If set, do EV5 Pass 4 fixups
-#if spe_fix == 0
-
-#define osf_chm_fix 0
-#endif
-
-#if spe_fix == 0
-
-#define enable_p4_fixups 0
-#endif
-
- // Only allow fixups if fix enabled
-
- //Turn off fill_errors and MEM_NEM in user mode
-// .macro fill_error_hack ?L10_, ?L20_, ?L30_, ?L40_
-// //save r22,r23,r24
-// stqp r22, 0x150(r31) //add
-// stqp r23, 0x158(r31) //contents
-// stqp r24, 0x160(r31) //bit mask
-//
-// lda r22, 0x82(r31)
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0x80(r22) // r23 <- contents of CIA_MASK
-// bis r23,r31,r23
-//
-// lda r24, 0x8(r31) // r24 <- MEM_NEM bit
-// beq r10, L10_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L20_ // ELSE
-//L10_: bis r23, r24, r23 // clear fillerr_en bit
-//L20_: // ENDIF
-//
-// stlp r23, 0x80(r22) // write back the CIA_MASK register
-// mb
-// ldlp r23, 0x80(r22)
-// bis r23,r31,r23
-// mb
-//
-// lda r22, 1(r31) // r22 <- 87.4000.0100 ptr to CIA_CTRL
-// ldah r22, 0x8740(r22)
-// sll r22, 8, r22
-// ldlp r23, 0(r22) // r23 <- contents of CIA_CTRL
-// bis r23,r31,r23
-//
-//
-// lda r24, 0x400(r31) // r9 <- fillerr_en bit
-// beq r10, L30_ // IF user mode (r10<0> == 0) pal mode
-// bic r23, r24, r23 // set fillerr_en bit
-// br r31, L40_ // ELSE
-//L30_: bis r23, r24, r23 // clear fillerr_en bit
-//L40_: // ENDIF
-//
-// stlp r23, 0(r22) // write back the CIA_CTRL register
-// mb
-// ldlp r23, 0(r22)
-// bis r23,r31,r23
-// mb
-//
-// //restore r22,r23,r24
-// ldqp r22, 0x150(r31)
-// ldqp r23, 0x158(r31)
-// ldqp r24, 0x160(r31)
-//
-// .endm
-
-// multiprocessor support can be enabled for a max of n processors by
-// setting the following to the number of processors on the system.
-// Note that this is really the max cpuid.
-
-#ifndef max_cpuid
-#define max_cpuid 8
-#endif
-
-#ifndef osf_svmin // platform specific palcode version number
-#define osf_svmin 0
-#endif
-
-
-#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))
-
-// .mcall ldqp // override macro64 definition with macro from library
-// .mcall stqp // override macro64 definition with macro from library
-
-
-// .psect _pal,mix
-// huh pb pal_base:
-// huh pb #define current_block_base . - pal_base
-
-// .sbttl "RESET - Reset Trap Entry Point"
-//+
-// RESET - offset 0000
-// Entry:
-// Vectored into via hardware trap on reset, or branched to
-// on swppal.
-//
-// r0 = whami
-// r1 = pal_base
-// r2 = base of scratch area
-// r3 = halt code
-//
-//
-// Function:
-//
-//-
-
- .text 0
- . = 0x0000
- .globl Pal_Base
-Pal_Base:
- HDW_VECTOR(PAL_RESET_ENTRY)
-Trap_Reset:
- nop
-#ifdef SIMOS
- /*
- * store into r1
- */
- br r1,sys_reset
-#else
- /* following is a srcmax change */
-
- DEBUGSTORE(0x41)
- /* The original code jumped using r1 as a linkage register to pass the base
- of PALcode to the platform specific code. We use r1 to pass a parameter
- from the SROM, so we hardcode the address of Pal_Base in platform.s
- */
- br r31, sys_reset
-#endif
-
- // Specify PAL version info as a constant
- // at a known location (reset + 8).
-
- .long osfpal_version_l // <pal_type@16> ! <vmaj@8> ! <vmin@0>
- .long osfpal_version_h // <max_cpuid@16> ! <osf_svmin@0>
- .long 0
- .long 0
-pal_impure_start:
- .quad 0
-pal_debug_ptr:
- .quad 0 // reserved for debug pointer ; 20
-#if beh_model == 0
-
-
-#if enable_p4_fixups != 0
-
-
- .quad 0
- .long p4_fixup_hw_rei_fixup_table
-#endif
-
-#else
-
- .quad 0 //
- .quad 0 //0x0030
- .quad 0
- .quad 0 //0x0040
- .quad 0
- .quad 0 //0x0050
- .quad 0
- .quad 0 //0x0060
- .quad 0
-pal_enter_cns_address:
- .quad 0 //0x0070 -- address to jump to from enter_console
- .long <<sys_exit_console-pal_base>+1> //0x0078 -- offset to sys_exit_console (set palmode bit)
-#endif
-
-
-
-
-// .sbttl "IACCVIO- Istream Access Violation Trap Entry Point"
-
-//+
-// IACCVIO - offset 0080
-// Entry:
-// Vectored into via hardware trap on Istream access violation or sign check error on PC.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV)
-// a2 <- -1 (for ifetch fault)
-// vector via entMM
-//-
-
- HDW_VECTOR(PAL_IACCVIO_ENTRY)
-Trap_Iaccvio:
- DEBUGSTORE(0x42)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_IACCVIO_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_IACCVIO_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bic r14, 3, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // pass mm_csr as a1
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entmm // get entry point
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r16, osfsf_pc(sp) // save pc
- stq r29, osfsf_gp(sp) // save gp
-
- mtpr r13, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- subq r31, 1, r18 // pass flag of istream, as a2
- hw_rei_spe
-
-
-// .sbttl "INTERRUPT- Interrupt Trap Entry Point"
-
-//+
-// INTERRUPT - offset 0100
-// Entry:
-// Vectored into via trap on hardware interrupt
-//
-// Function:
-// check for halt interrupt
-// check for passive release (current ipl geq requestor)
-// if necessary, switch to kernel mode
-// push stack frame, update ps (including current mode and ipl copies), sp, and gp
-// pass the interrupt info to the system module
-//
-//-
-
-
- HDW_VECTOR(PAL_INTERRUPT_ENTRY)
-Trap_Interrupt:
- mfpr r13, ev5__intid // Fetch level of interruptor
- mfpr r25, ev5__isr // Fetch interrupt summary register
-
- srl r25, isr_v_hlt, r9 // Get HLT bit
- mfpr r14, ev5__ipl
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kern
- blbs r9, sys_halt_interrupt // halt_interrupt if HLT bit set
-
- cmple r13, r14, r8 // R8 = 1 if intid .less than or eql. ipl
- bne r8, sys_passive_release // Passive release is current rupt is lt or eq ipl
-
- and r11, osfps_m_mode, r10 // get mode bit
- beq r10, TRAP_INTERRUPT_10_ // Skip stack swap in kernel
-
- mtpr r30, pt_usp // save user stack
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_INTERRUPT_10_:
- lda sp, (0-osfsf_c_size)(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r11, osfsf_ps(sp) // save ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // push gp
- stq r16, osfsf_a0(sp) // a0
-
-// pvc_violate 354 // ps is cleared anyway, if store to stack faults.
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
- stq r17, osfsf_a1(sp) // a1
-
- stq r18, osfsf_a2(sp) // a2
- subq r13, 0x11, r12 // Start to translate from EV5IPL->OSFIPL
-
- srl r12, 1, r8 // 1d, 1e: ipl 6. 1f: ipl 7.
- subq r13, 0x1d, r9 // Check for 1d, 1e, 1f
-
- cmovge r9, r8, r12 // if .ge. 1d, then take shifted value
- bis r12, r31, r11 // set new ps
-
- mfpr r12, pt_intmask
- and r11, osfps_m_ipl, r14 // Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)
-
-#ifdef SIMOS
- /*
- * Lance had space problems. We don't.
- */
- extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
- mfpr r29, pt_kgp // update gp
- mtpr r14, ev5__ipl // load the new IPL into Ibox
-#else
-// Moved the following three lines to sys_interrupt to make room for debug
-// extbl r12, r14, r14 // Translate new OSFIPL->EV5IPL
-// mfpr r29, pt_kgp // update gp
-
-// mtpr r14, ev5__ipl // load the new IPL into Ibox
-#endif
- br r31, sys_interrupt // Go handle interrupt
-
-
-
-// .sbttl "ITBMISS- Istream TBmiss Trap Entry Point"
-
-//+
-// ITBMISS - offset 0180
-// Entry:
-// Vectored into via hardware trap on Istream translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//
-//-
-
- HDW_VECTOR(PAL_ITB_MISS_ENTRY)
-Trap_Itbmiss:
-#if real_mm == 0
-
-
- // Simple 1-1 va->pa mapping
-
- nop // Pad to align to E1
- mfpr r8, exc_addr
-
- srl r8, page_offset_size_bits, r9
- sll r9, 32, r9
-
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
- mtpr r9, itb_pte // E1
-
- hw_rei_stall // Nital says I don't have to obey shadow wait rule here.
-#else
-
- // Real MM mapping
- nop
- mfpr r8, ev5__ifault_va_form // Get virtual address of PTE.
-
- nop
- mfpr r10, exc_addr // Get PC of faulting instruction in case of DTBmiss.
-
-pal_itb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- mtpr r10, exc_addr // Restore exc_address if there was a trap.
-
- mfpr r31, ev5__va // Unlock VA in case there was a double miss
- nop
-
- and r8, osfpte_m_foe, r25 // Look for FOE set.
- blbc r8, invalid_ipte_handler // PTE not valid.
-
- nop
- bne r25, foe_ipte_handler // FOE is set
-
- nop
- mtpr r8, ev5__itb_pte // Ibox remembers the VA, load the PTE into the ITB.
-
- hw_rei_stall //
-
-#endif
-
-
-
-
-// .sbttl "DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_SINGLE - offset 0200
-// Entry:
-// Vectored into via hardware trap on Dstream single translation buffer miss.
-//
-// Function:
-// Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
-// Can trap into DTBMISS_DOUBLE.
-// This routine can use the PALshadow registers r8, r9, and r10
-//-
-
- HDW_VECTOR(PAL_DTB_MISS_ENTRY)
-Trap_Dtbmiss_Single:
-#if real_mm == 0
- // Simple 1-1 va->pa mapping
- mfpr r8, va // E0
- srl r8, page_offset_size_bits, r9
-
- sll r9, 32, r9
- lda r9, 0x3301(r9) // Make PTE, V set, all KRE, URE, KWE, UWE
-
- mtpr r9, dtb_pte // E0
- nop // Pad to align to E0
-
-
-
- mtpr r8, dtb_tag // E0
- nop
-
- nop // Pad tag write
- nop
-
- nop // Pad tag write
- nop
-
- hw_rei
-#else
- mfpr r8, ev5__va_form // Get virtual address of PTE - 1 cycle delay. E0.
- mfpr r10, exc_addr // Get PC of faulting instruction in case of error. E1.
-
-// DEBUGSTORE(0x45)
-// DEBUG_EXC_ADDR()
- // Real MM mapping
- mfpr r9, ev5__mm_stat // Get read/write bit. E0.
- mtpr r10, pt6 // Stash exc_addr away
-
-pal_dtb_ldq:
- ld_vpte r8, 0(r8) // Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
- nop // Pad MF VA
-
- mfpr r10, ev5__va // Get original faulting VA for TB load. E0.
- nop
-
- mtpr r8, ev5__dtb_pte // Write DTB PTE part. E0.
- blbc r8, invalid_dpte_handler // Handle invalid PTE
-
- mtpr r10, ev5__dtb_tag // Write DTB TAG part, completes DTB load. No virt ref for 3 cycles.
- mfpr r10, pt6
-
- // Following 2 instructions take 2 cycles
- mtpr r10, exc_addr // Return linkage in case we trapped. E1.
- mfpr r31, pt0 // Pad the write to dtb_tag
-
- hw_rei // Done, return
-#endif
-
-
-
-
-// .sbttl "DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point"
-
-//+
-// DTBMISS_DOUBLE - offset 0280
-// Entry:
-// Vectored into via hardware trap on Double TBmiss from single miss flows.
-//
-// r8 - faulting VA
-// r9 - original MMstat
-// r10 - original exc_addr (both itb,dtb miss)
-// pt6 - original exc_addr (dtb miss flow only)
-// VA IPR - locked with original faulting VA
-//
-// Function:
-// Get PTE, if valid load TB and return.
-// If not valid then take TNV/ACV exception.
-//
-// pt4 and pt5 are reserved for this flow.
-//
-//
-//-
-
- HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
-Trap_Dtbmiss_double:
-#if ldvpte_bug_fix != 0
- mtpr r8, pt4 // save r8 to do exc_addr check
- mfpr r8, exc_addr
- blbc r8, Trap_Dtbmiss_Single //if not in palmode, should be in the single routine, dummy!
- mfpr r8, pt4 // restore r8
-#endif
- nop
- mtpr r22, pt5 // Get some scratch space. E1.
- // Due to virtual scheme, we can skip the first lookup and go
- // right to fetch of level 2 PTE
- sll r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- mtpr r21, pt4 // Get some scratch space. E1.
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- mfpr r21, pt_ptbr // Get physical address of the page table.
-
- nop
- addq r21, r22, r21 // Index into page table for level 2 PTE.
-
- sll r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22 // Clean off upper bits of VA
- ldqp r21, 0(r21) // Get level 2 PTE (addr<2:0> ignored)
-
- srl r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
- blbc r21, double_pte_inv // Check for Invalid PTE.
-
- srl r21, 32, r21 // extract PFN from PTE
- sll r21, page_offset_size_bits, r21 // get PFN * 2^13 for add to <seg3>*8
-
- addq r21, r22, r21 // Index into page table for level 3 PTE.
- nop
-
- ldqp r21, 0(r21) // Get level 3 PTE (addr<2:0> ignored)
- blbc r21, double_pte_inv // Check for invalid PTE.
-
- mtpr r21, ev5__dtb_pte // Write the PTE. E0.
- mfpr r22, pt5 // Restore scratch register
-
- mtpr r8, ev5__dtb_tag // Write the TAG. E0. No virtual references in subsequent 3 cycles.
- mfpr r21, pt4 // Restore scratch register
-
- nop // Pad write to tag.
- nop
-
- nop // Pad write to tag.
- nop
-
- hw_rei
-
-
-
-// .sbttl "UNALIGN -- Dstream unalign trap"
-//+
-// UNALIGN - offset 0300
-// Entry:
-// Vectored into via hardware trap on unaligned Dstream reference.
-//
-// Function:
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- Opcode
-// a2 <- src/dst register number
-// vector via entUna
-//-
-
- HDW_VECTOR(PAL_UNALIGN_ENTRY)
-Trap_Unalign:
-/* DEBUGSTORE(0x47)*/
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r8, ev5__mm_stat // Get mmstat --ok to use r8, no tbmiss
- mfpr r14, exc_addr // get pc
-
- srl r8, mm_stat_v_ra, r13 // Shift Ra field to ls bits
- blbs r14, pal_pal_bug_check // Bugcheck if unaligned in PAL
-
- blbs r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
- // not set, must be a load
- and r13, 0x1F, r8 // isolate ra
-
- cmpeq r8, 0x1F, r8 // check for r31/F31
- bne r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault
-
-UNALIGN_NO_DISMISS:
- bis r11, r31, r12 // Save PS
- bge r25, UNALIGN_NO_DISMISS_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-UNALIGN_NO_DISMISS_10_:
- mfpr r25, ev5__va // Unlock VA
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- mtpr r25, pt0 // Stash VA
- stq r18, osfsf_a2(sp) // a2
-
- stq r11, osfsf_ps(sp) // save old ps
- srl r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode
-
- stq r29, osfsf_gp(sp) // save gp
- addq r14, 4, r14 // inc PC past the ld/st
-
- stq r17, osfsf_a1(sp) // a1
- and r25, mm_stat_m_opcode, r17// Clean opocde for a1
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r16, pt0 // a0 <- va/unlock
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entuna // get entry point
-
-
- bis r12, r31, r11 // update ps
- br r31, unalign_trap_cont
-
-
-
-
-// .sbttl "DFAULT - Dstream Fault Trap Entry Point"
-
-//+
-// DFAULT - offset 0380
-// Entry:
-// Vectored into via hardware trap on dstream fault or sign check error on DVA.
-//
-// Function:
-// Ignore faults on FETCH/FETCH_M
-// Check for DFAULT in PAL
-// Build stack frame
-// a0 <- Faulting VA
-// a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
-// a2 <- R/W
-// vector via entMM
-//
-//-
- HDW_VECTOR(PAL_D_FAULT_ENTRY)
-Trap_Dfault:
-// DEBUGSTORE(0x48)
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r13, ev5__mm_stat // Get mmstat
- mfpr r8, exc_addr // get pc, preserve r14
-
- srl r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
- blbs r8, dfault_in_pal
-
- bis r8, r31, r14 // move exc_addr to correct place
- bis r11, r31, r12 // Save PS
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- and r9, mm_stat_m_opcode, r9 // Clean all but opcode
-
- cmpeq r9, evx_opc_sync, r9 // Is the opcode fetch/fetchm?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
- //dismiss exception if load to r31/f31
- blbs r13, dfault_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r13, mm_stat_v_ra, r9 // Shift rnum to low bits
-
- and r9, 0x1F, r9 // isolate rnum
- nop
-
- cmpeq r9, 0x1F, r9 // Is the rnum r31 or f31?
- bne r9, dfault_fetch_ldr31_err // Yes, dismiss the fault
-
-dfault_no_dismiss:
- and r13, 0xf, r13 // Clean extra bits in mm_stat
- bge r25, dfault_trap_cont // no stack swap needed if cm=kern
-
-
- mtpr r30, pt_usp // save user stack
- bis r31, r31, r12 // Set new PS
-
- mfpr r30, pt_ksp
- br r31, dfault_trap_cont
-
-
-
-
-
-// .sbttl "MCHK - Machine Check Trap Entry Point"
-
-//+
-// MCHK - offset 0400
-// Entry:
-// Vectored into via hardware trap on machine check.
-//
-// Function:
-//
-//-
-
- HDW_VECTOR(PAL_MCHK_ENTRY)
-Trap_Mchk:
- DEBUGSTORE(0x49)
- mtpr r31, ic_flush_ctl // Flush the Icache
- br r31, sys_machine_check
-
-
-
-
-// .sbttl "OPCDEC - Illegal Opcode Trap Entry Point"
-
-//+
-// OPCDEC - offset 0480
-// Entry:
-// Vectored into via hardware trap on illegal opcode.
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_OPCDEC_ENTRY)
-Trap_Opcdec:
- DEBUGSTORE(0x4a)
-//simos DEBUG_EXC_ADDR()
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_OPCDEC_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_OPCDEC_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- addq r14, 4, r14 // inc pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r11, osfsf_ps(sp) // save old ps
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r17, osfsf_a1(sp) // a1
-
- stq r29, osfsf_gp(sp) // save gp
- stq r14, osfsf_pc(sp) // save pc
-
- bis r12, r31, r11 // update ps
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei, E1
-
- mfpr r29, pt_kgp // get the kgp, E1
-
- hw_rei_spe // done, E1
-
-
-
-
-
-
-// .sbttl "ARITH - Arithmetic Exception Trap Entry Point"
-
-//+
-// ARITH - offset 0500
-// Entry:
-// Vectored into via hardware trap on arithmetic excpetion.
-//
-// Function:
-// Build stack frame
-// a0 <- exc_sum
-// a1 <- exc_mask
-// a2 <- unpred
-// vector via entArith
-//
-//-
- HDW_VECTOR(PAL_ARITH_ENTRY)
-Trap_Arith:
- DEBUGSTORE(0x4b)
- and r11, osfps_m_mode, r12 // get mode bit
- mfpr r31, ev5__va // unlock mbox
-
- bis r11, r31, r25 // save ps
- mfpr r14, exc_addr // get pc
-
- nop
- blbs r14, pal_pal_bug_check // arith trap from PAL
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- beq r12, TRAP_ARITH_10_ // if zero we are in kern now
-
- bis r31, r31, r25 // set the new ps
- mtpr r30, pt_usp // save user stack
-
- nop
- mfpr r30, pt_ksp // get kern stack
-
-TRAP_ARITH_10_: lda sp, 0-osfsf_c_size(sp) // allocate stack space
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- nop // Pad current mode write and stq
- mfpr r13, ev5__exc_sum // get the exc_sum
-
- mfpr r12, pt_entarith
- stq r14, osfsf_pc(sp) // save pc
-
- stq r17, osfsf_a1(sp)
- mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
-
- stq r11, osfsf_ps(sp) // save ps
- bis r25, r31, r11 // set new ps
-
- stq r16, osfsf_a0(sp) // save regs
- srl r13, exc_sum_v_swc, r16// shift data to correct position
-
- stq r18, osfsf_a2(sp)
-// pvc_violate 354 // ok, but make sure reads of exc_mask/sum are not in same trap shadow
- mtpr r31, ev5__exc_sum // Unlock exc_sum and exc_mask
-
- stq r29, osfsf_gp(sp)
- mtpr r12, exc_addr // Set new PC - 1 bubble to hw_rei - E1
-
- mfpr r29, pt_kgp // get the kern gp - E1
- hw_rei_spe // done - E1
-
-
-
-
-
-
-// .sbttl "FEN - Illegal Floating Point Operation Trap Entry Point"
-
-//+
-// FEN - offset 0580
-// Entry:
-// Vectored into via hardware trap on illegal FP op.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- HDW_VECTOR(PAL_FEN_ENTRY)
-Trap_Fen:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- blbs r14, pal_pal_bug_check // check opcdec in palmode
-
- mfpr r13, ev5__icsr
- nop
-
- bis r11, r31, r12 // Save PS
- bge r25, TRAP_FEN_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r12 // Set new PS
- mfpr r30, pt_ksp
-
-TRAP_FEN_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- srl r13, icsr_v_fpe, r25 // Shift FP enable to bit 0
-
-
- stq r16, osfsf_a0(sp) // save regs
- mfpr r13, pt_entif // get entry point
-
- stq r18, osfsf_a2(sp) // a2
- stq r11, osfsf_ps(sp) // save old ps
-
- stq r29, osfsf_gp(sp) // save gp
- bis r12, r31, r11 // set new ps
-
- stq r17, osfsf_a1(sp) // a1
- blbs r25,fen_to_opcdec // If FP is enabled, this is really OPCDEC.
-
- bis r31, osf_a0_fen, r16 // set a0
- stq r14, osfsf_pc(sp) // save pc
-
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei -E1
-
- mfpr r29, pt_kgp // get the kgp -E1
-
- hw_rei_spe // done -E1
-
-// FEN trap was taken, but the fault is really opcdec.
- ALIGN_BRANCH
-fen_to_opcdec:
- addq r14, 4, r14 // save PC+4
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r14, osfsf_pc(sp) // save pc
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
- hw_rei_spe // done
-
-
-
-// .sbttl "Misc handlers"
- // Start area for misc code.
-//+
-//dfault_trap_cont
-// A dfault trap has been taken. The sp has been updated if necessary.
-// Push a stack frame a vector via entMM.
-//
-// Current state:
-// r12 - new PS
-// r13 - MMstat
-// VA - locked
-//
-//-
- ALIGN_BLOCK
-dfault_trap_cont:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r25, ev5__va // Fetch VA/unlock
-
- stq r18, osfsf_a2(sp) // a2
- and r13, 1, r18 // Clean r/w bit for a2
-
- stq r16, osfsf_a0(sp) // save regs
- bis r25, r31, r16 // a0 <- va
-
- stq r17, osfsf_a1(sp) // a1
- srl r13, 1, r17 // shift fault bits to right position
-
- stq r11, osfsf_ps(sp) // save old ps
- bis r12, r31, r11 // update ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entmm // get entry point
-
- stq r29, osfsf_gp(sp) // save gp
- cmovlbs r17, 1, r17 // a2. acv overrides fox.
-
- mtpr r25, exc_addr // load exc_addr with entMM
- // 1 cycle to hw_rei
- mfpr r29, pt_kgp // get the kgp
-
- hw_rei_spe // done
-
-//+
-//unalign_trap_cont
-// An unalign trap has been taken. Just need to finish up a few things.
-//
-// Current state:
-// r25 - entUna
-// r13 - shifted MMstat
-//
-//-
- ALIGN_BLOCK
-unalign_trap_cont:
- mtpr r25, exc_addr // load exc_addr with entUna
- // 1 cycle to hw_rei
-
-
- mfpr r29, pt_kgp // get the kgp
- and r13, mm_stat_m_ra, r18 // Clean Ra for a2
-
- hw_rei_spe // done
-
-
-
-//+
-// dfault_in_pal
-// Dfault trap was taken, exc_addr points to a PAL PC.
-// r9 - mmstat<opcode> right justified
-// r8 - exception address
-//
-// These are the cases:
-// opcode was STQ -- from a stack builder, KSP not valid halt
-// r14 - original exc_addr
-// r11 - original PS
-// opcode was STL_C -- rti or retsys clear lock_flag by stack write,
-// KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was LDQ -- retsys or rti stack read, KSP not valid halt
-// r11 - original PS
-// r14 - original exc_addr
-// opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
-// r10 - original exc_addr
-// r11 - original PS
-//
-//
-//-
- ALIGN_BLOCK
-dfault_in_pal:
- DEBUGSTORE(0x50)
- bic r8, 3, r8 // Clean PC
- mfpr r9, pal_base
-
- mfpr r31, va // unlock VA
-#if real_mm != 0
- // if not real_mm, should never get here from miss flows
-
- subq r9, r8, r8 // pal_base - offset
-
- lda r9, pal_itb_ldq-pal_base(r8)
- nop
-
- beq r9, dfault_do_bugcheck
- lda r9, pal_dtb_ldq-pal_base(r8)
-
- beq r9, dfault_do_bugcheck
-#endif
-
-//
-// KSP invalid halt case --
-ksp_inval_halt:
- DEBUGSTORE(76)
- bic r11, osfps_m_mode, r11 // set ps to kernel mode
- mtpr r0, pt0
-
- mtpr r31, dtb_cm // Make sure that the CM IPRs are all kernel mode
- mtpr r31, ips
-
- mtpr r14, exc_addr // Set PC to instruction that caused trouble
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-
- lda r0, hlt_c_ksp_inval(r31) // set halt code to hw halt
- br r31, sys_enter_console // enter the console
-
- ALIGN_BRANCH
-dfault_do_bugcheck:
- bis r10, r31, r14 // bugcheck expects exc_addr in r14
- br r31, pal_pal_bug_check
-
-
- ALIGN_BLOCK
-//+
-// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
-// On entry -
-// r14 - exc_addr
-// VA is locked
-//
-//-
-dfault_fetch_ldr31_err:
- mtpr r11, ev5__dtb_cm
- mtpr r11, ev5__ps // Make sure ps hasn't changed
-
- mfpr r31, va // unlock the mbox
- addq r14, 4, r14 // inc the pc to skip the fetch
-
- mtpr r14, exc_addr // give ibox new PC
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei
-
-
-
- ALIGN_BLOCK
-//+
-// sys_from_kern
-// callsys from kernel mode - OS bugcheck machine check
-//
-//-
-sys_from_kern:
- mfpr r14, exc_addr // PC points to call_pal
- subq r14, 4, r14
-
- lda r25, mchk_c_os_bugcheck(r31) // fetch mchk code
- br r31, pal_pal_mchk
-
-
-// .sbttl "Continuation of long call_pal flows"
- ALIGN_BLOCK
-//+
-// wrent_tbl
-// Table to write *int in paltemps.
-// 4 instructions/entry
-// r16 has new value
-//
-//-
-wrent_tbl:
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entint
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entarith
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entmm
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entif
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entuna
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
-
-//orig pvc_jsr wrent, dest=1
- nop
- mtpr r16, pt_entsys
-
- mfpr r31, pt0 // Pad for mt->mf paltemp rule
- hw_rei
-
- ALIGN_BLOCK
-//+
-// tbi_tbl
-// Table to do tbi instructions
-// 4 instructions per entry
-//-
-tbi_tbl:
- // -2 tbia
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_ia // Flush DTB
- mtpr r31, ev5__itb_ia // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
- // -1 tbiap
-//orig pvc_jsr tbi, dest=1
- mtpr r31, ev5__dtb_iap // Flush DTB
- mtpr r31, ev5__itb_iap // Flush ITB
-
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush // Flush Icache
-#else
-
- hw_rei_stall
-#endif
-
- nop // Pad table
-
-
- // 0 unused
-//orig pvc_jsr tbi, dest=1
- hw_rei // Pad table
- nop
- nop
- nop
-
-
- // 1 tbisi
-//orig pvc_jsr tbi, dest=1
-#if icflush_on_tbix != 0
-
-
-
- nop
- br r31, pal_ic_flush_and_tbisi // Flush Icache
- nop
- nop // Pad table
-#else
-
- nop
- nop
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- // 2 tbisd
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB.
- nop
-
- nop
- hw_rei_stall
-
-
- // 3 tbis
-//orig pvc_jsr tbi, dest=1
- mtpr r17, ev5__dtb_is // Flush DTB
-#if icflush_on_tbix != 0
-
-
- br r31, pal_ic_flush_and_tbisi // Flush Icache and ITB
-#else
- br r31, tbi_finish
- ALIGN_BRANCH
-tbi_finish:
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-#endif
-
-
-
- ALIGN_BLOCK
-//+
-// bpt_bchk_common:
-// Finish up the bpt/bchk instructions
-//-
-bpt_bchk_common:
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r14, osfsf_pc(sp) // save pc
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
- ALIGN_BLOCK
-//+
-// rti_to_user
-// Finish up the rti instruction
-//-
-rti_to_user:
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r31, ev5__ipl // set the ipl. No hw_rei for 2 cycles
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mfpr r30, pt_usp
- hw_rei_spe // and back
-
-
- ALIGN_BLOCK
-//+
-// rti_to_kern
-// Finish up the rti instruction
-//-
-rti_to_kern:
- and r12, osfps_m_ipl, r11 // clean ps
- mfpr r12, pt_intmask // get int mask
-
- extbl r12, r11, r12 // get mask for this ipl
- mtpr r25, pt_ksp // save off incase RTI to user
-
- mtpr r12, ev5__ipl // set the new ipl.
- or r25, r31, sp // sp
-
-// pvc_violate 217 // possible hidden mt->mf ipl not a problem in callpals
- hw_rei
-
- ALIGN_BLOCK
-//+
-// swpctx_cont
-// Finish up the swpctx instruction
-//-
-
-swpctx_cont:
-#if ev5_p1 != 0
-
-
- bic r25, r24, r25 // clean icsr<FPE>
- get_impure r8 // get impure pointer
-
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
- fix_impure_ipr r8 // adjust impure pointer
-
- restore_reg1 pmctr_ctl, r8, r8, ipr=1 // "ldqp" - get pmctr_ctl bits
- srl r23, 32, r24 // move asn to low asn pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- sll r24, itb_asn_v_asn, r12
-
-#else
-
- bic r25, r24, r25 // clean icsr<FPE,PMP>
- sll r12, icsr_v_fpe, r12 // shift new fen to pos
-
- ldqp r14, osfpcb_q_mmptr(r16)// get new mmptr
- srl r22, osfpcb_v_pme, r22 // get pme down to bit 0
-
- or r25, r12, r25 // icsr with new fen
- srl r23, 32, r24 // move asn to low asn pos
-
- and r22, 1, r22
- sll r24, itb_asn_v_asn, r12
-
- sll r22, icsr_v_pmp, r22
- nop
-
- or r25, r22, r25 // icsr with new pme
-#endif
-
- sll r24, dtb_asn_v_asn, r24
-
- subl r23, r13, r13 // gen new cc offset
- mtpr r12, itb_asn // no hw_rei_stall in 0,1,2,3,4
-
- mtpr r24, dtb_asn // Load up new ASN
- mtpr r25, icsr // write the icsr
-
- sll r14, page_offset_size_bits, r14 // Move PTBR into internal position.
- ldqp r25, osfpcb_q_usp(r16) // get new usp
-
- insll r13, 4, r13 // >> 32
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r14, pt_ptbr // load the new ptbr
-
- mtpr r13, cc // set new offset
- ldqp r30, osfpcb_q_ksp(r16) // get new ksp
-
-// pvc_violate 379 // ldqp can't trap except replay. only problem if mf same ipr in same shadow
- mtpr r25, pt_usp // save usp
-
-#if ev5_p1 != 0
-
-
- blbc r8, no_pm_change // if monitoring all processes -- no need to change pm
-
- // otherwise, monitoring select processes - update pm
- lda r25, 0x3F(r31)
- cmovlbc r22, r31, r8 // if pme set, disable counters, otherwise use saved encodings
-
- sll r25, pmctr_v_ctl2, r25 // create ctl field bit mask
- mfpr r22, ev5__pmctr
-
- and r8, r25, r8 // mask new ctl value
- bic r22, r25, r22 // clear ctl field in pmctr
-
- or r8, r22, r8
- mtpr r8, ev5__pmctr
-
-no_pm_change:
-#endif
-
-
-#if osf_chm_fix != 0
-
-
- p4_fixup_hw_rei_stall // removes this section for Pass 4 by placing a hw_rei_stall here
-
-#if build_fixed_image != 0
-
-
- hw_rei_stall
-#else
-
- mfpr r9, pt_pcbb // get FEN
-#endif
-
- ldqp r9, osfpcb_q_fen(r9)
- blbc r9, no_pm_change_10_ // skip if FEN disabled
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31)
- mtpr r12, dc_mode // turn dcache on so we can flush it
- nop // force correct slotting
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
- mfpr r31, pt0 // no mbox instructions in 1,2,3,4
-
- lda r8, 0(r31) // flood the dcache with junk data
-no_pm_change_5_: ldqp r31, 0(r8)
- lda r8, 0x20(r8) // touch each cache block
- srl r8, 13, r9
- blbc r9, no_pm_change_5_
-
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn the dcache back off
- nop // force correct slotting
- mfpr r31, pt0 // no hw_rei_stall in 0,1
-#endif
-
-
-no_pm_change_10_: hw_rei_stall // back we go
-
- ALIGN_BLOCK
-//+
-// swppal_cont - finish up the swppal call_pal
-//-
-
-swppal_cont:
- mfpr r2, pt_misc // get misc bits
- sll r0, pt_misc_v_switch, r0 // get the "I've switched" bit
- or r2, r0, r2 // set the bit
- mtpr r31, ev5__alt_mode // ensure alt_mode set to 0 (kernel)
- mtpr r2, pt_misc // update the chip
-
- or r3, r31, r4
- mfpr r3, pt_impure // pass pointer to the impure area in r3
-//orig fix_impure_ipr r3 // adjust impure pointer for ipr read
-//orig restore_reg1 bc_ctl, r1, r3, ipr=1 // pass cns_bc_ctl in r1
-//orig restore_reg1 bc_config, r2, r3, ipr=1 // pass cns_bc_config in r2
-//orig unfix_impure_ipr r3 // restore impure pointer
- lda r3, CNS_Q_IPR(r3)
- RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
- RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
- lda r3, -CNS_Q_IPR(r3)
-
- or r31, r31, r0 // set status to success
-// pvc_violate 1007
- jmp r31, (r4) // and call our friend, it's her problem now
-
-
-swppal_fail:
- addq r0, 1, r0 // set unknown pal or not loaded
- hw_rei // and return
-
-
-// .sbttl "Memory management"
-
- ALIGN_BLOCK
-//+
-//foe_ipte_handler
-// IFOE detected on level 3 pte, sort out FOE vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV vs FOE. Build stack and dispatch
-// Will not be here if TNV.
-//-
-
-foe_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, foe_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-foe_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss or fault on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- lda r17, mmcsr_c_acv(r31) // assume ACV
-
- stq r16, osfsf_pc(sp) // save pc
- cmovlbs r25, mmcsr_c_foe, r17 // otherwise FOE
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
- ALIGN_BLOCK
-//+
-//invalid_ipte_handler
-// TNV detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R8 = pte
-// R10 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch.
-//-
-
-invalid_ipte_handler:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, invalid_ipte_handler_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- nop
-
-invalid_ipte_handler_10_: srl r8, osfpte_v_kre, r25 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r14 // Save pc/va in case TBmiss on stack
- mfpr r13, pt_entmm // get entry point
-
- stq r16, osfsf_a0(sp) // a0
- or r14, r31, r16 // pass pc/va as a0
-
- stq r17, osfsf_a1(sp) // a1
- nop
-
- stq r18, osfsf_a2(sp) // a2
- and r25, 1, r17 // Isolate kre
-
- stq r16, osfsf_pc(sp) // save pc
- xor r17, 1, r17 // map to acv/tnv as a1
-
- stq r12, osfsf_ps(sp) // save ps
- subq r31, 1, r18 // pass flag of istream as a2
-
- stq r29, osfsf_gp(sp)
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- hw_rei_spe // out to exec
-
-
-
-
- ALIGN_BLOCK
-//+
-//invalid_dpte_handler
-// INVALID detected on level 3 pte, sort out TNV vs ACV
-//
-// on entry:
-// with
-// R10 = va
-// R8 = pte
-// R9 = mm_stat
-// PT6 = pc
-//
-// Function
-// Determine TNV vs ACV. Build stack and dispatch
-//-
-
-
-invalid_dpte_handler:
- mfpr r12, pt6
- blbs r12, tnv_in_pal // Special handler if original faulting reference was in PALmode
-
- bis r12, r31, r14 // save PC in case of tbmiss or fault
- srl r9, mm_stat_v_opcode, r25 // shift opc to <0>
-
- mtpr r11, pt0 // Save PS for stack write
- and r25, mm_stat_m_opcode, r25 // isolate opcode
-
- cmpeq r25, evx_opc_sync, r25 // is it FETCH/FETCH_M?
- blbs r25, nmiss_fetch_ldr31_err // yes
-
- //dismiss exception if load to r31/f31
- blbs r9, invalid_dpte_no_dismiss // mm_stat<0> set on store or fetchm
-
- // not a store or fetch, must be a load
- srl r9, mm_stat_v_ra, r25 // Shift rnum to low bits
-
- and r25, 0x1F, r25 // isolate rnum
- nop
-
- cmpeq r25, 0x1F, r25 // Is the rnum r31 or f31?
- bne r25, nmiss_fetch_ldr31_err // Yes, dismiss the fault
-
-invalid_dpte_no_dismiss:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- bge r25, invalid_dpte_no_dismiss_10_ // no stack swap needed if cm=kern
-
- srl r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-invalid_dpte_no_dismiss_10_: srl r8, osfpte_v_kre, r12 // get kre to <0>
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
-
- or r10, r31, r25 // Save va in case TBmiss on stack
- and r9, 1, r13 // save r/w flag
-
- stq r16, osfsf_a0(sp) // a0
- or r25, r31, r16 // pass va as a0
-
- stq r17, osfsf_a1(sp) // a1
- or r31, mmcsr_c_acv, r17 // assume acv
-
- srl r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
- stq r29, osfsf_gp(sp)
-
- stq r18, osfsf_a2(sp) // a2
- cmovlbs r13, r25, r12 // if write access move acv based on write enable
-
- or r13, r31, r18 // pass flag of dstream access and read vs write
- mfpr r25, pt0 // get ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r13, pt_entmm // get entry point
-
- stq r25, osfsf_ps(sp) // save ps
- mtpr r13, exc_addr // set vector address
-
- mfpr r29, pt_kgp // load kgp
- cmovlbs r12, mmcsr_c_tnv, r17 // make p2 be tnv if access ok else acv
-
- hw_rei_spe // out to exec
-
-//+
-//
-// We come here if we are erring on a dtb_miss, and the instr is a
-// fetch, fetch_m, of load to r31/f31.
-// The PC is incremented, and we return to the program.
-// essentially ignoring the instruction and error.
-//
-//-
- ALIGN_BLOCK
-nmiss_fetch_ldr31_err:
- mfpr r12, pt6
- addq r12, 4, r12 // bump pc to pc+4
-
- mtpr r12, exc_addr // and set entry point
- mfpr r31, pt0 // pad exc_addr write
-
- hw_rei //
-
- ALIGN_BLOCK
-//+
-// double_pte_inv
-// We had a single tbmiss which turned into a double tbmiss which found
-// an invalid PTE. Return to single miss with a fake pte, and the invalid
-// single miss flow will report the error.
-//
-// on entry:
-// r21 PTE
-// r22 available
-// VA IPR locked with original fault VA
-// pt4 saved r21
-// pt5 saved r22
-// pt6 original exc_addr
-//
-// on return to tbmiss flow:
-// r8 fake PTE
-//
-//
-//-
-double_pte_inv:
- srl r21, osfpte_v_kre, r21 // get the kre bit to <0>
- mfpr r22, exc_addr // get the pc
-
- lda r22, 4(r22) // inc the pc
- lda r8, osfpte_m_prot(r31) // make a fake pte with xre and xwe set
-
- cmovlbc r21, r31, r8 // set to all 0 for acv if pte<kre> is 0
- mtpr r22, exc_addr // set for rei
-
- mfpr r21, pt4 // restore regs
- mfpr r22, pt5 // restore regs
-
- hw_rei // back to tb miss
-
- ALIGN_BLOCK
-//+
-//tnv_in_pal
-// The only places in pal that ld or store are the
-// stack builders, rti or retsys. Any of these mean we
-// need to take a ksp not valid halt.
-//
-//-
-tnv_in_pal:
-
-
- br r31, ksp_inval_halt
-
-
-// .sbttl "Icache flush routines"
-
- ALIGN_BLOCK
-//+
-// Common Icache flush routine.
-//
-//
-//-
-pal_ic_flush:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
- nop
- nop
-
-one_cycle_and_hw_rei:
- nop
- nop
-
- hw_rei_stall
-
-#if icflush_on_tbix != 0
-
-
- ALIGN_BLOCK
-
-//+
-// Common Icache flush and ITB invalidate single routine.
-// ITBIS and hw_rei_stall must be in same octaword.
-// r17 - has address to invalidate
-//
-//-
-PAL_IC_FLUSH_AND_TBISI:
- nop
- mtpr r31, ev5__ic_flush_ctl // Icache flush - E1
- nop
- nop
-
-// Now, do 44 NOPs. 3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 10
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 20
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 30
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop // 40
-
-
- nop
- nop
-
- nop
- nop
-
- // A quadword is 64 bits, so an octaword is 128 bits -> 16 bytes -> 4 instructions
- // 44 nops plus 4 instructions before it is 48 instructions.
- // Since this routine started on a 32-byte (8 instruction) boundary,
- // the following 2 instructions will be in the same octword as required.
-// ALIGN_BRANCH
- mtpr r17, ev5__itb_is // Flush ITB
- hw_rei_stall
-
-#endif
-
- ALIGN_BLOCK
-//+
-//osfpal_calpal_opcdec
-// Here for all opcdec CALL_PALs
-//
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
-osfpal_calpal_opcdec:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r14, exc_addr // get pc
- nop
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, osfpal_calpal_opcdec_10_ // no stack swap needed if cm=kern
-
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-osfpal_calpal_opcdec_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- nop
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_opdec, r16 // set a0
-
- stq r18, osfsf_a2(sp) // a2
- mfpr r13, pt_entif // get entry point
-
- stq r12, osfsf_ps(sp) // save old ps
- stq r17, osfsf_a1(sp) // a1
-
- stq r14, osfsf_pc(sp) // save pc
- nop
-
- stq r29, osfsf_gp(sp) // save gp
- mtpr r13, exc_addr // load exc_addr with entIF
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kgp
-
-
- hw_rei_spe // done
-
-
-
-
-
-//+
-//pal_update_pcb
-// Update the PCB with the current SP, AST, and CC info
-//
-// r0 - return linkage
-//-
- ALIGN_BLOCK
-
-pal_update_pcb:
- mfpr r12, pt_pcbb // get pcbb
- and r11, osfps_m_mode, r25 // get mode
- beq r25, pal_update_pcb_10_ // in kern? no need to update user sp
- mtpr r30, pt_usp // save user stack
- stqp r30, osfpcb_q_usp(r12) // store usp
- br r31, pal_update_pcb_20_ // join common
-pal_update_pcb_10_: stqp r30, osfpcb_q_ksp(r12) // store ksp
-pal_update_pcb_20_: rpcc r13 // get cyccounter
- srl r13, 32, r14 // move offset
- addl r13, r14, r14 // merge for new time
- stlp r14, osfpcb_l_cc(r12) // save time
-
-//orig pvc_jsr updpcb, bsr=1, dest=1
- ret r31, (r0)
-
-
-
-#if remove_save_state == 0
-
-// .sbttl "PAL_SAVE_STATE"
-//+
-//
-// Pal_save_state
-//
-// Function
-// All chip state saved, all PT's, SR's FR's, IPR's
-//
-//
-// Regs' on entry...
-//
-// R0 = halt code
-// pt0 = r0
-// R1 = pointer to impure
-// pt4 = r1
-// R3 = return addr
-// pt5 = r3
-//
-// register usage:
-// r0 = halt_code
-// r1 = addr of impure area
-// r3 = return_address
-// r4 = scratch
-//
-//-
-
-
- ALIGN_BLOCK
- .globl pal_save_state
-pal_save_state:
-//
-//
-// start of implementation independent save routine
-//
-// the impure area is larger than the addressibility of hw_ld and hw_st
-// therefore, we need to play some games: The impure area
-// is informally divided into the "machine independent" part and the
-// "machine dependent" part. The state that will be saved in the
-// "machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use (un)fix_impure_gpr macros).
-// All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
-// The impure pointer will need to be adjusted by a different offset for each. The store/restore_reg
-// macros will automagically adjust the offset correctly.
-//
-
-// The distributed code is commented out and followed by corresponding SRC code.
-// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)
-
-//orig fix_impure_gpr r1 // adjust impure area pointer for stores to "gpr" part of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area flag
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the valid flag
-//orig store_reg1 hlt, r0, r1, ipr=1
- SAVE_GPR(r0,CNS_Q_HALT,r1) // Save the halt code
-
- mfpr r0, pt0 // get r0 back //orig
-//orig store_reg1 0, r0, r1 // save r0
- SAVE_GPR(r0,CNS_Q_GPR+0x00,r1) // Save r0
-
- mfpr r0, pt4 // get r1 back //orig
-//orig store_reg1 1, r0, r1 // save r1
- SAVE_GPR(r0,CNS_Q_GPR+0x08,r1) // Save r1
-
-//orig store_reg 2 // save r2
- SAVE_GPR(r2,CNS_Q_GPR+0x10,r1) // Save r2
-
- mfpr r0, pt5 // get r3 back //orig
-//orig store_reg1 3, r0, r1 // save r3
- SAVE_GPR(r0,CNS_Q_GPR+0x18,r1) // Save r3
-
- // reason code has been saved
- // r0 has been saved
- // r1 has been saved
- // r2 has been saved
- // r3 has been saved
- // pt0, pt4, pt5 have been lost
-
- //
- // Get out of shadow mode
- //
-
- mfpr r2, icsr // Get icsr //orig
-//orig ldah r0, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r0, (1<<(icsr_v_sde-16))(r31)
- bic r2, r0, r0 // ICSR with SDE clear //orig
- mtpr r0, icsr // Turn off SDE //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-
- // save integer regs R4-r31
-//orig #define t 4
-//orig .repeat 28
-//orig store_reg \t
-//orig #define t t + 1
-//orig .endr
- SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
- SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
- SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
- SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
- SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
- SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
- SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
- SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
- SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
- SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
- SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
- SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
- SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
- SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
- SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
- SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
- SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
- // save all paltemp regs except pt0
-
-//orig unfix_impure_gpr r1 // adjust impure area pointer for gpr stores
-//orig fix_impure_ipr r1 // adjust impure area pointer for pt stores
-//orig #define t 1
-//orig .repeat 23
-//orig store_reg \t , pal=1
-//orig #define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore the impure base address.
- lda r1, CNS_Q_IPR(r1) // Point to the base of IPR area.
- SAVE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
- SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
- SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
- SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
- SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
- SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
- SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
- SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
- SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
- SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
- SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
- SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
- SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
- SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
- SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
- SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
- SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
- SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
- SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
- SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
- // Restore shadow mode
- mfpr r31, pt0 // pad write to icsr out of shadow of store (trap does not abort write) //orig
- mfpr r31, pt0 //orig
- mtpr r2, icsr // Restore original ICSR //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
- // save all integer shadow regs
-
-//orig #define t 8
-//orig .repeat 7
-//orig store_reg \t, shadow=1
-//orig #define t t + 1
-//orig .endr
-//orig store_reg 25, shadow=1
-
- SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
-
-//orig store_reg exc_addr, ipr=1 // save ipr
-//orig store_reg pal_base, ipr=1 // save ipr
-//orig store_reg mm_stat, ipr=1 // save ipr
-//orig store_reg va, ipr=1 // save ipr
-//orig store_reg icsr, ipr=1 // save ipr
-//orig store_reg ipl, ipr=1 // save ipr
-//orig store_reg ps, ipr=1 // save ipr
-//orig store_reg itb_asn, ipr=1 // save ipr
-//orig store_reg aster, ipr=1 // save ipr
-//orig store_reg astrr, ipr=1 // save ipr
-//orig store_reg sirr, ipr=1 // save ipr
-//orig store_reg isr, ipr=1 // save ipr
-//orig store_reg ivptbr, ipr=1 // save ipr
-//orig store_reg mcsr, ipr=1 // save ipr
-//orig store_reg dc_mode, ipr=1 // save ipr
-
- SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
- SAVE_IPR(va,CNS_Q_VA,r1)
- SAVE_IPR(icsr,CNS_Q_ICSR,r1)
- SAVE_IPR(ipl,CNS_Q_IPL,r1)
- SAVE_IPR(ips,CNS_Q_IPS,r1)
- SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- SAVE_IPR(aster,CNS_Q_ASTER,r1)
- SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
- SAVE_IPR(sirr,CNS_Q_SIRR,r1)
- SAVE_IPR(isr,CNS_Q_ISR,r1)
- SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
- SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
-//orig pvc_violate 379 // mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
-//orig store_reg maf_mode, ipr=1 // save ipr -- no mbox instructions for
-//orig // PVC violation applies only to
-pvc$osf35$379: // loads. HW_ST ok here, so ignore
- SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2
-
-
- //the following iprs are informational only -- will not be restored
-
-//orig store_reg icperr_stat, ipr=1
-//orig store_reg pmctr, ipr=1
-//orig store_reg intid, ipr=1
-//orig store_reg exc_sum, ipr=1
-//orig store_reg exc_mask, ipr=1
-//orig ldah r14, 0xfff0(r31)
-//orig zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig nop // pad mf dcperr_stat out of shadow of last store
-//orig nop
-//orig nop
-//orig store_reg dcperr_stat, ipr=1
-
- SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
- SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
- SAVE_IPR(intId,CNS_Q_INT_ID,r1)
- SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
- SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
- ldah r14, 0xFFF0(zero)
- zap r14, 0xE0, r14 // Get base address of CBOX IPRs
- NOP // Pad mfpr dcPerr out of shadow of
- NOP // last store
- NOP
- SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)
-
- // read cbox ipr state
-
-//orig mb
-//orig ldqp r2, ev5__sc_ctl(r14)
-//orig ldqp r13, ld_lock(r14)
-//orig ldqp r4, ev5__sc_addr(r14)
-//orig ldqp r5, ev5__ei_addr(r14)
-//orig ldqp r6, ev5__bc_tag_addr(r14)
-//orig ldqp r7, ev5__fill_syn(r14)
-//orig bis r5, r4, r31
-//orig bis r7, r6, r31 // make sure previous loads finish before reading stat registers which unlock them
-//orig ldqp r8, ev5__sc_stat(r14) // unlocks sc_stat,sc_addr
-//orig ldqp r9, ev5__ei_stat(r14) // may unlock ei_*, bc_tag_addr, fill_syn
-//orig ldqp r31, ev5__ei_stat(r14) // ensures it is really unlocked
-//orig mb
-
-#ifndef SIMOS
- mb
- ldq_p r2, scCtl(r14)
- ldq_p r13, ldLock(r14)
- ldq_p r4, scAddr(r14)
- ldq_p r5, eiAddr(r14)
- ldq_p r6, bcTagAddr(r14)
- ldq_p r7, fillSyn(r14)
- bis r5, r4, zero // Make sure all loads complete before
- bis r7, r6, zero // reading registers that unlock them.
- ldq_p r8, scStat(r14) // Unlocks scAddr.
- ldq_p r9, eiStat(r14) // Unlocks eiAddr, bcTagAddr, fillSyn.
- ldq_p zero, eiStat(r14) // Make sure it is really unlocked.
- mb
-#endif
-//orig // save cbox ipr state
-//orig store_reg1 sc_ctl, r2, r1, ipr=1
-//orig store_reg1 ld_lock, r13, r1, ipr=1
-//orig store_reg1 sc_addr, r4, r1, ipr=1
-//orig store_reg1 ei_addr, r5, r1, ipr=1
-//orig store_reg1 bc_tag_addr, r6, r1, ipr=1
-//orig store_reg1 fill_syn, r7, r1, ipr=1
-//orig store_reg1 sc_stat, r8, r1, ipr=1
-//orig store_reg1 ei_stat, r9, r1, ipr=1
-//orig //bc_config? sl_rcv?
-
- SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
- SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
- SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
- SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
- SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
- SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
- SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
- SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
-
-// restore impure base //orig
-//orig unfix_impure_ipr r1
- lda r1, -CNS_Q_IPR(r1)
-
-// save all floating regs //orig
- mfpr r0, icsr // get icsr //orig
- or r31, 1, r2 // get a one //orig
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot //orig
- sll r2, icsr_v_fpe, r2 // Shift it into ICSR<FPE> position
- or r2, r0, r0 // set FEN on //orig
- mtpr r0, icsr // write to icsr, enabling FEN //orig
-
-// map the save area virtually
-// orig mtpr r31, dtb_ia // clear the dtb
-// orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-// orig sll r0, 32, r0 // shift to PFN field
-// orig lda r2, 0xff(r31) // all read enable and write enable bits set
-// orig sll r2, 8, r2 // move to PTE location
-// orig addq r0, r2, r0 // combine with PFN
-// orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-// orig mtpr r1, dtb_tag // write TB tag
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too - in case the impure area crosses a page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag
-
- lda r4, (1<<va_s_off)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
- sll r31, 0, r31 // stall cycle 1 // orig
- sll r31, 0, r31 // stall cycle 2 // orig
- sll r31, 0, r31 // stall cycle 3 // orig
- nop // orig
-
-//orig // add offset for saving fpr regs
-//orig fix_impure_gpr r1
-
- lda r1, 0x200(r1) // Point to center of CPU segment
-
-// now save the regs - F0-F31
-
-//orig #define t 0
-//orig .repeat 32
-//orig store_reg \t , fpu=1
-//orig #define t t + 1
-//orig .endr
-
- mf_fpcr f0 // original
-
- SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
- SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
- SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
- SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
- SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
- SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
- SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
- SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
- SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
- SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
- SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
- SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
- SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
- SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
- SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
- SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
- SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
- SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
- SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
- SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
- SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig //switch impure offset from gpr to ipr---
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig store_reg1 fpcsr, f0, r1, fpcsr=1
-
- SAVE_FPR(f0,CNS_Q_FPCSR,r1) // fpcsr loaded above into f0 -- can it reach// pb
- lda r1, -0x200(r1) // Restore the impure base address
-
-//orig // and back to gpr ---
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-
-//orig lda r0, cns_mchksize(r31) // get size of mchk area
-//orig store_reg1 mchkflag, r0, r1, ipr=1
-//orig mb
-
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area again
- // save this using the IPR base (it is closer) not the GRP base as they used...pb
- lda r0, MACHINE_CHECK_SIZE(r31) // get size of mchk area
- SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
- mb
-
-//orig or r31, 1, r0 // get a one
-//orig store_reg1 flag, r0, r1, ipr=1 // set dump area flag
-//orig mb
-
- lda r1, -CNS_Q_IPR(r1) // back to the base
- lda r1, 0x200(r1) // Point to center of CPU segment
- or r31, 1, r0 // get a one
- SAVE_GPR(r0,CNS_Q_FLAG,r1) // // set dump area valid flag
- mb
-
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
- lda r1, -0x200(r1) // Point to center of CPU segment
-
- mtpr r31, dtb_ia // clear the dtb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr savsta, bsr=1, dest=1
- ret r31, (r3) // and back we go
-#endif
-
-
-#if remove_restore_state == 0
-
-
-// .sbttl "PAL_RESTORE_STATE"
-//+
-//
-// Pal_restore_state
-//
-//
-// register usage:
-// r1 = addr of impure area
-// r3 = return_address
-// all other regs are scratchable, as they are about to
-// be reloaded from ram.
-//
-// Function:
-// All chip state restored, all SRs, FRs, PTs, IPRs
-// *** except R1, R3, PT0, PT4, PT5 ***
-//
-//-
- ALIGN_BLOCK
-pal_restore_state:
-
-//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.
-
-//orig // map the console io area virtually
-//orig mtpr r31, dtb_ia // clear the dtb
-//orig srl r1, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r1, dtb_tag // write TB tag
-//orig
-
- mtpr r31, dtbIa // Clear all DTB entries
- srl r1, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r1, dtbTag // Write the PTE and tag into the DTB
-
-
-//orig // map the next page too, in case impure area crosses page boundary
-//orig lda r4, 1@page_offset_size_bits(r1) // generate address for next page
-//orig srl r4, page_offset_size_bits, r0 // Clean off low bits of VA
-//orig sll r0, 32, r0 // shift to PFN field
-//orig lda r2, 0xff(r31) // all read enable and write enable bits set
-//orig sll r2, 8, r2 // move to PTE location
-//orig addq r0, r2, r0 // combine with PFN
-//orig
-//orig mtpr r0, dtb_pte // Load PTE and set TB valid bit
-//orig mtpr r4, dtb_tag // write TB tag - no virtual mbox instruction for 3 cycles
-
- lda r4, (1<<VA_S_OFF)(r1) // Generate address for next page
- srl r4, va_s_off, r0 // Clean off byte-within-page offset
- sll r0, pte_v_pfn, r0 // Shift to form PFN
- lda r0, pte_m_prot(r0) // Set all read/write enable bits
- mtpr r0, dtbPte // Load the PTE and set valid
- mtpr r4, dtbTag // Write the PTE and tag into the DTB
-
-//orig // save all floating regs
-//orig mfpr r0, icsr // get icsr
-//orig// assume ICSR_V_SDE gt <ICSR_V_FPE> // assertion checker
-//orig or r31, <<1@<ICSR_V_SDE-ICSR_V_FPE>> ! 1>, r2 // set SDE and FPE
-//orig sll r2, #icsr_v_fpe, r2 // shift for fpu spot
-//orig or r2, r0, r0 // set FEN on
-//orig mtpr r0, icsr // write to icsr, enabling FEN and SDE. 3 bubbles to floating instr.
-
- mfpr r0, icsr // Get current ICSR
- bis zero, 1, r2 // Get a '1'
- or r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
- sll r2, icsr_v_fpe, r2 // Shift bits into position
- bis r2, r2, r0 // Set ICSR<SDE> and ICSR<FPE>
- mtpr r0, icsr // Update the chip
-
- mfpr r31, pt0 // FPE bubble cycle 1 //orig
- mfpr r31, pt0 // FPE bubble cycle 2 //orig
- mfpr r31, pt0 // FPE bubble cycle 3 //orig
-
-//orig fix_impure_ipr r1
-//orig restore_reg1 fpcsr, f0, r1, fpcsr=1
-//orig mt_fpcr f0
-//orig
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1 // adjust impure pointer offset for gpr access
-//orig
-//orig // restore all floating regs
-//orig#define t 0
-//orig .repeat 32
-//orig restore_reg \t , fpu=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, 200(r1) // Point to base of IPR area again
- RESTORE_FPR(f0,CNS_Q_FPCSR,r1) // can it reach?? pb
- mt_fpcr f0 // original
-
- lda r1, 0x200(r1) // point to center of CPU segment
- RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
- RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
- RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
- RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
- RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
- RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
- RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
- RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
- RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
- RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
- RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
- RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
- RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
- RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
- RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
- RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
- RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
- RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
- RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
- RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
- RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
- RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
- RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
- RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
- RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
- RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
- RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
- RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
- RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
- RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
- RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
- RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig
-//orig // restore all pal regs
-//orig#define t 1
-//orig .repeat 23
-//orig restore_reg \t , pal=1
-//orig#define t t + 1
-//orig .endr
-
- lda r1, -0x200(r1) // Restore base address of impure area.
- lda r1, CNS_Q_IPR(r1) // Point to base of IPR area.
- RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1) // the osf code didn't save/restore palTemp 0 ?? pboyle
- RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
- RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
- RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
- RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
- RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
- RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
- RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
- RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
- RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
- RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
- RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
- RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
- RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
- RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
- RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
- RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
- RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
- RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
- RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
- RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
- RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
- RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
- RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)
-
-
-//orig restore_reg exc_addr, ipr=1 // restore ipr
-//orig restore_reg pal_base, ipr=1 // restore ipr
-//orig restore_reg ipl, ipr=1 // restore ipr
-//orig restore_reg ps, ipr=1 // restore ipr
-//orig mtpr r0, dtb_cm // set current mode in mbox too
-//orig restore_reg itb_asn, ipr=1
-//orig srl r0, itb_asn_v_asn, r0
-//orig sll r0, dtb_asn_v_asn, r0
-//orig mtpr r0, dtb_asn // set ASN in Mbox too
-//orig restore_reg ivptbr, ipr=1
-//orig mtpr r0, mvptbr // use ivptbr value to restore mvptbr
-//orig restore_reg mcsr, ipr=1
-//orig restore_reg aster, ipr=1
-//orig restore_reg astrr, ipr=1
-//orig restore_reg sirr, ipr=1
-//orig restore_reg maf_mode, ipr=1 // no mbox instruction for 3 cycles
-//orig mfpr r31, pt0 // (may issue with mt maf_mode)
-//orig mfpr r31, pt0 // bubble cycle 1
-//orig mfpr r31, pt0 // bubble cycle 2
-//orig mfpr r31, pt0 // bubble cycle 3
-//orig mfpr r31, pt0 // (may issue with following ld)
-
- // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
- RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
- RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
- RESTORE_IPR(ipl,CNS_Q_IPL,r1)
- RESTORE_IPR(ips,CNS_Q_IPS,r1)
- mtpr r0, dtbCm // Set Mbox current mode too.
- RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
- srl r0, 4, r0
- sll r0, 57, r0
- mtpr r0, dtbAsn // Set Mbox ASN too
- RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
- mtpr r0, mVptBr // Set Mbox VptBr too
- RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
- RESTORE_IPR(aster,CNS_Q_ASTER,r1)
- RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
- RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
- RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
- STALL
- STALL
- STALL
- STALL
- STALL
-
-
- // restore all integer shadow regs
-//orig#define t 8
-//orig .repeat 7
-//orig restore_reg \t, shadow=1
-//orig#define t t + 1
-//orig .endr
-//orig restore_reg 25, shadow=1
-//orig restore_reg dc_mode, ipr=1 // no mbox instructions for 4 cycles
-
- RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1) // also called p0...p7 in the Hudson code
- RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
- RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
- RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
- RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
- RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
- RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
- RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
- RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)
-
- //
- // Get out of shadow mode
- //
-
- mfpr r31, pt0 // pad last load to icsr write (in case of replay, icsr will be written anyway) //orig
- mfpr r31, pt0 // "" //orig
- mfpr r0, icsr // Get icsr //orig
-//orig ldah r2, <1@<icsr_v_sde-16>>(r31) // Get a one in SHADOW_ENABLE bit location
- ldah r2, (1<<(ICSR_V_SDE-16))(r31) // Get a one in SHADOW_ENABLE bit location //orig
- bic r0, r2, r2 // ICSR with SDE clear //orig
- mtpr r2, icsr // Turn off SDE - no palshadow rd/wr for 3 bubble cycles //orig
-
- mfpr r31, pt0 // SDE bubble cycle 1 //orig
- mfpr r31, pt0 // SDE bubble cycle 2 //orig
- mfpr r31, pt0 // SDE bubble cycle 3 //orig
- nop //orig
-
-//orig // switch impure pointer from ipr to gpr area --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig // restore all integer regs
-//orig#define t 4
-//orig .repeat 28
-//orig restore_reg \t
-//orig#define t t + 1
-//orig .endr
-
-// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...
-
- lda r1, -CNS_Q_IPR(r1) // Restore base address of impure area
- lda r1, 0x200(r1) // Point to center of CPU segment
-
- RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
- RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
- RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
- RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
- RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
- RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
- RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
- RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
- RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
- RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
- RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
- RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
- RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
- RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
- RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
- RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
- RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
- RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
- RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
- RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
- RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
- RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
- RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
- RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
- RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
- RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
- RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
- RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)
-
-//orig // switch impure pointer from gpr to ipr area --
-//orig unfix_impure_gpr r1
-//orig fix_impure_ipr r1
-//orig restore_reg icsr, ipr=1 // restore original icsr- 4 bubbles to hw_rei
-
- lda t0, -0x200(t0) // Restore base address of impure area.
- lda t0, CNS_Q_IPR(t0) // Point to base of IPR area again.
- RESTORE_IPR(icsr,CNS_Q_ICSR,r1)
-
-//orig // and back again --
-//orig unfix_impure_ipr r1
-//orig fix_impure_gpr r1
-//orig store_reg1 flag, r31, r1, ipr=1 // clear dump area valid flag
-//orig mb
-
- lda t0, -CNS_Q_IPR(t0) // Back to base of impure area again,
- lda t0, 0x200(t0) // and back to center of CPU segment
- SAVE_GPR(r31,CNS_Q_FLAG,r1) // Clear the dump area valid flag
- mb
-
-//orig // and back we go
-//orig// restore_reg 3
-//orig restore_reg 2
-//orig// restore_reg 1
-//orig restore_reg 0
-//orig // restore impure area base
-//orig unfix_impure_gpr r1
-
- RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
- RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
- lda r1, -0x200(r1) // Restore impure base address
-
- mfpr r31, pt0 // stall for ldqp above //orig
-
- mtpr r31, dtb_ia // clear the tb //orig
- mtpr r31, itb_ia // clear the itb //orig
-
-//orig pvc_jsr rststa, bsr=1, dest=1
- ret r31, (r3) // back we go //orig
-#endif
-
-
-//+
-// pal_pal_bug_check -- code has found a bugcheck situation.
-// Set things up and join common machine check flow.
-//
-// Input:
-// r14 - exc_addr
-//
-// On exit:
-// pt0 - saved r0
-// pt1 - saved r1
-// pt4 - saved r4
-// pt5 - saved r5
-// pt6 - saved r6
-// pt10 - saved exc_addr
-// pt_misc<47:32> - mchk code
-// pt_misc<31:16> - scb vector
-// r14 - base of Cbox IPRs in IO space
-// MCES<mchk> is set
-//-
-
- ALIGN_BLOCK
- .globl pal_pal_bug_check_from_int
-pal_pal_bug_check_from_int:
- DEBUGSTORE(0x79)
-//simos DEBUG_EXC_ADDR()
- DEBUGSTORE(0x20)
-//simos bsr r25, put_hex
- lda r25, mchk_c_bugcheck(r31)
- addq r25, 1, r25 // set flag indicating we came from interrupt and stack is already pushed
- br r31, pal_pal_mchk
- nop
-
-pal_pal_bug_check:
- lda r25, mchk_c_bugcheck(r31)
-
-pal_pal_mchk:
- sll r25, 32, r25 // Move mchk code to position
-
- mtpr r14, pt10 // Stash exc_addr
- mtpr r14, exc_addr
-
- mfpr r12, pt_misc // Get MCES and scratch
- zap r12, 0x3c, r12
-
- or r12, r25, r12 // Combine mchk code
- lda r25, scb_v_procmchk(r31) // Get SCB vector
-
- sll r25, 16, r25 // Move SCBv to position
- or r12, r25, r25 // Combine SCBv
-
- mtpr r0, pt0 // Stash for scratch
- bis r25, mces_m_mchk, r25 // Set MCES<MCHK> bit
-
- mtpr r25, pt_misc // Save mchk code!scbv!whami!mces
- ldah r14, 0xfff0(r31)
-
- mtpr r1, pt1 // Stash for scratch
- zap r14, 0xE0, r14 // Get Cbox IPR base
-
- mtpr r4, pt4
- mtpr r5, pt5
-
- mtpr r6, pt6
- blbs r12, sys_double_machine_check // MCHK halt if double machine check
-
- br r31, sys_mchk_collect_iprs // Join common machine check flow
-
-// align_to_call_pal_section // Align to address of first call_pal entry point - 2000
-
-// .sbttl "HALT - PALcode for HALT instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// GO to console code
-//
-//-
-
- .text 1
-// . = 0x2000
- CALL_PAL_PRIV(PAL_HALT_ENTRY)
-call_pal_halt:
-#if rax_mode == 0
- mfpr r31, pt0 // Pad exc_addr read
- mfpr r31, pt0
-
- mfpr r12, exc_addr // get PC
- subq r12, 4, r12 // Point to the HALT
-
- mtpr r12, exc_addr
- mtpr r0, pt0
-
-//orig pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
- lda r0, hlt_c_sw_halt(r31) // set halt code to sw halt
- br r31, sys_enter_console // enter the console
-
-#else // RAX mode
- mb
- mb
- mtpr r9, ev5__dtb_asn // no Dstream virtual ref for next 3 cycles.
- mtpr r9, ev5__itb_asn // E1. Update ITB ASN. No hw_rei for 5 cycles.
- mtpr r8, exc_addr // no HW_REI for 1 cycle.
- blbc r9, not_begin_case
- mtpr r31, ev5__dtb_ia // clear DTB. No Dstream virtual ref for 2 cycles.
- mtpr r31, ev5__itb_ia // clear ITB.
-
-not_begin_case:
- nop
- nop
-
- nop
- nop // pad mt itb_asn ->hw_rei_stall
-
- hw_rei_stall
-#endif
-
-// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// R16 - contains the PFN of the page to be flushed
-//
-// Function:
-// Flush all Dstream caches of 1 entire page
-// The CFLUSH routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
-Call_Pal_Cflush:
- br r31, sys_cflush
-
-// .sbttl "DRAINA - PALcode for DRAINA instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Implicit TRAPB performed by hardware.
-//
-// Function:
-// Stall instruction issue until all prior instructions are guaranteed to
-// complete without incurring aborts. For the EV5 implementation, this
-// means waiting until all pending DREADS are returned.
-//
-//-
-
- CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
-Call_Pal_Draina:
- ldah r14, 0x100(r31) // Init counter. Value?
- nop
-
-DRAINA_LOOP:
- subq r14, 1, r14 // Decrement counter
- mfpr r13, ev5__maf_mode // Fetch status bit
-
- srl r13, maf_mode_v_dread_pending, r13
- ble r14, DRAINA_LOOP_TOO_LONG
-
- nop
- blbs r13, DRAINA_LOOP // Wait until all DREADS clear
-
- hw_rei
-
-DRAINA_LOOP_TOO_LONG:
- br r31, call_pal_halt
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0003)
-CallPal_OpcDec03:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0004)
-CallPal_OpcDec04:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0005)
-CallPal_OpcDec05:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0006)
-CallPal_OpcDec06:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0007)
-CallPal_OpcDec07:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0008)
-CallPal_OpcDec08:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "CSERVE- PALcode for CSERVE instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Various functions for private use of console software
-//
-// option selector in r0
-// arguments in r16....
-// The CSERVE routine is in the system specific module.
-//
-//-
-
- CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
-Call_Pal_Cserve:
- br r31, sys_cserve
-
-// .sbttl "swppal - PALcode for swppal instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// Vectored into via hardware PALcode instruction dispatch.
-// R16 contains the new PAL identifier
-// R17:R21 contain implementation-specific entry parameters
-//
-// R0 receives status:
-// 0 success (PAL was switched)
-// 1 unknown PAL variant
-// 2 known PAL variant, but PAL not loaded
-//
-//
-// Function:
-// Swap control to another PAL.
-//-
-
- CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
-Call_Pal_Swppal:
- cmpule r16, 255, r0 // see if a kibble was passed
- cmoveq r16, r16, r0 // if r16=0 then a valid address (ECO 59)
-
- or r16, r31, r3 // set r3 incase this is a address
- blbc r0, swppal_cont // nope, try it as an address
-
- cmpeq r16, 2, r0 // is it our friend OSF?
- blbc r0, swppal_fail // nope, don't know this fellow
-
- br r2, CALL_PAL_SWPPAL_10_ // tis our buddy OSF
-
-// .global osfpal_hw_entry_reset
-// .weak osfpal_hw_entry_reset
-// .long <osfpal_hw_entry_reset-pal_start>
-//orig halt // don't know how to get the address here - kludge ok, load pal at 0
- .long 0 // ?? hack upon hack...pb
-
-CALL_PAL_SWPPAL_10_: ldlp r3, 0(r2) // fetch target addr
-// ble r3, swppal_fail ; if OSF not linked in say not loaded.
- mfpr r2, pal_base // fetch pal base
-
- addq r2, r3, r3 // add pal base
- lda r2, 0x3FFF(r31) // get pal base checker mask
-
- and r3, r2, r2 // any funky bits set?
- cmpeq r2, 0, r0 //
-
- blbc r0, swppal_fail // return unknown if bad bit set.
- br r31, swppal_cont
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000B)
-CallPal_OpcDec0B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000C)
-CallPal_OpcDec0C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wripir- PALcode for wripir instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// r16 = processor number to interrupt
-//
-// Function:
-// IPIR <- R16
-// Handled in system-specific code
-//
-// Exit:
-// interprocessor interrupt is recorded on the target processor
-// and is initiated when the proper enabling conditions are present.
-//-
-
- CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
-Call_Pal_Wrpir:
- br r31, sys_wripir
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x000E)
-CallPal_OpcDec0E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x000F)
-CallPal_OpcDec0F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdmces- PALcode for rdmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// R0 <- ZEXT(MCES)
-//-
-
- CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
-Call_Pal_Rdmces:
- mfpr r0, pt_mces // Read from PALtemp
- and r0, mces_m_all, r0 // Clear other bits
-
- hw_rei
-
-// .sbttl "wrmces- PALcode for wrmces instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
-// If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
-// If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
-// MCES<3> <- R16<3> (DPC)
-// MCES<4> <- R16<4> (DSC)
-//
-//-
-
- CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
-Call_Pal_Wrmces:
- and r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13 // Isolate MCHK, SCE, PCE
- mfpr r14, pt_mces // Get current value
-
- ornot r31, r13, r13 // Flip all the bits
- and r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17
-
- and r14, r13, r1 // Update MCHK, SCE, PCE
- bic r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1 // Clear old DPC, DSC
-
- or r1, r17, r1 // Update DPC and DSC
- mtpr r1, pt_mces // Write MCES back
-
-#if rawhide_system == 0
- nop // Pad to fix PT write->read restriction
-#else
- blbs r16, RAWHIDE_clear_mchk_lock // Clear logout from lock
-#endif
-
- nop
- hw_rei
-
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_PRIV(0x0012)
-CallPal_OpcDec12:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0013)
-CallPal_OpcDec13:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0014)
-CallPal_OpcDec14:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0015)
-CallPal_OpcDec15:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0016)
-CallPal_OpcDec16:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0017)
-CallPal_OpcDec17:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0018)
-CallPal_OpcDec18:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0019)
-CallPal_OpcDec19:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001A)
-CallPal_OpcDec1A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001B)
-CallPal_OpcDec1B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001C)
-CallPal_OpcDec1C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001D)
-CallPal_OpcDec1D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001E)
-CallPal_OpcDec1E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x001F)
-CallPal_OpcDec1F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0020)
-CallPal_OpcDec20:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0021)
-CallPal_OpcDec21:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0022)
-CallPal_OpcDec22:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0023)
-CallPal_OpcDec23:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0024)
-CallPal_OpcDec24:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0025)
-CallPal_OpcDec25:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0026)
-CallPal_OpcDec26:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0027)
-CallPal_OpcDec27:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0028)
-CallPal_OpcDec28:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x0029)
-CallPal_OpcDec29:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002A)
-CallPal_OpcDec2A:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrfen - PALcode for wrfen instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// a0<0> -> ICSR<FPE>
-// Store new FEN in PCB
-// Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16) are UNPREDICTABLE
-//
-// Issue: What about pending FP loads when FEN goes from on->off????
-//-
-
- CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
-Call_Pal_Wrfen:
- or r31, 1, r13 // Get a one
- mfpr r1, ev5__icsr // Get current FPE
-
- sll r13, icsr_v_fpe, r13 // shift 1 to icsr<fpe> spot, e0
- and r16, 1, r16 // clean new fen
-
- sll r16, icsr_v_fpe, r12 // shift new fen to correct bit position
- bic r1, r13, r1 // zero icsr<fpe>
-
- or r1, r12, r1 // Or new FEN into ICSR
- mfpr r12, pt_pcbb // Get PCBB - E1
-
- mtpr r1, ev5__icsr // write new ICSR. 3 Bubble cycles to HW_REI
- stlp r16, osfpcb_q_fen(r12) // Store FEN in PCB.
-
- mfpr r31, pt0 // Pad ICSR<FPE> write.
- mfpr r31, pt0
-
- mfpr r31, pt0
-// pvc_violate 225 // cuz PVC can't distinguish which bits changed
- hw_rei
-
-
- CALL_PAL_PRIV(0x002C)
-CallPal_OpcDec2C:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "wrvptpr - PALcode for wrvptpr instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// vptptr <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
-Call_Pal_Wrvptptr:
- mtpr r16, ev5__mvptbr // Load Mbox copy
- mtpr r16, ev5__ivptbr // Load Ibox copy
- nop // Pad IPR write
- nop
- hw_rei
-
- CALL_PAL_PRIV(0x002E)
-CallPal_OpcDec2E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_PRIV(0x002F)
-CallPal_OpcDec2F:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "swpctx- PALcode for swpctx instruction"
-
-//+
-//
-// Entry:
-// hardware dispatch via callPal instruction
-// R16 -> new pcb
-//
-// Function:
-// dynamic state moved to old pcb
-// new state loaded from new pcb
-// pcbb pointer set
-// old pcbb returned in R0
-//
-// Note: need to add perf monitor stuff
-//-
-
- CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
-Call_Pal_Swpctx:
- rpcc r13 // get cyccounter
- mfpr r0, pt_pcbb // get pcbb
-
- ldqp r22, osfpcb_q_fen(r16) // get new fen/pme
- ldqp r23, osfpcb_l_cc(r16) // get new asn
-
- srl r13, 32, r25 // move offset
- mfpr r24, pt_usp // get usp
-
- stqp r30, osfpcb_q_ksp(r0) // store old ksp
-// pvc_violate 379 // stqp can't trap except replay. only problem if mf same ipr in same shadow.
- mtpr r16, pt_pcbb // set new pcbb
-
- stqp r24, osfpcb_q_usp(r0) // store usp
- addl r13, r25, r25 // merge for new time
-
- stlp r25, osfpcb_l_cc(r0) // save time
- ldah r24, (1<<(icsr_v_fpe-16))(r31)
-
- and r22, 1, r12 // isolate fen
- mfpr r25, icsr // get current icsr
-
- ev5_pass2 lda r24, (1<<icsr_v_pmp)(r24)
- br r31, swpctx_cont
-
-// .sbttl "wrval - PALcode for wrval instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// sysvalue <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
-Call_Pal_Wrval:
- nop
- mtpr r16, pt_sysval // Pad paltemp write
- nop
- nop
- hw_rei
-
-
-// .sbttl "rdval - PALcode for rdval instruction"
-
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- sysvalue
-//-
-
- CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
-Call_Pal_Rdval:
- nop
- mfpr r0, pt_sysval
- nop
- hw_rei
-
-// .sbttl "tbi - PALcode for tbi instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// TB invalidate
-// r16/a0 = TBI type
-// r17/a1 = Va for TBISx instructions
-//-
-
- CALL_PAL_PRIV(PAL_TBI_ENTRY)
-Call_Pal_Tbi:
- addq r16, 2, r16 // change range to 0-2
- br r23, CALL_PAL_tbi_10_ // get our address
-
-CALL_PAL_tbi_10_: cmpult r16, 6, r22 // see if in range
- lda r23, tbi_tbl-CALL_PAL_tbi_10_(r23) // set base to start of table
- sll r16, 4, r16 // * 16
- blbc r22, CALL_PAL_tbi_30_ // go rei, if not
-
- addq r23, r16, r23 // addr of our code
-//orig pvc_jsr tbi
- jmp r31, (r23) // and go do it
-
-CALL_PAL_tbi_30_:
- hw_rei
- nop
-
-// .sbttl "wrent - PALcode for wrent instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Update ent* in paltemps
-// r16/a0 = Address of entry routine
-// r17/a1 = Entry Number 0..5
-//
-// r22, r23 trashed
-//-
-
- CALL_PAL_PRIV(PAL_WRENT_ENTRY)
-Call_Pal_Wrent:
- cmpult r17, 6, r22 // see if in range
- br r23, CALL_PAL_wrent_10_ // get our address
-
-CALL_PAL_wrent_10_: bic r16, 3, r16 // clean pc
- blbc r22, CALL_PAL_wrent_30_ // go rei, if not in range
-
- lda r23, wrent_tbl-CALL_PAL_wrent_10_(r23) // set base to start of table
- sll r17, 4, r17 // *16
-
- addq r17, r23, r23 // Get address in table
-//orig pvc_jsr wrent
- jmp r31, (r23) // and go do it
-
-CALL_PAL_wrent_30_:
- hw_rei // out of range, just return
-
-// .sbttl "swpipl - PALcode for swpipl instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- PS<IPL>
-// PS<IPL> <- a0<2:0> (r16)
-//
-// t8 (r22) is scratch
-//-
-
- CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
-Call_Pal_Swpipl:
- and r16, osfps_m_ipl, r16 // clean New ipl
- mfpr r22, pt_intmask // get int mask
-
- extbl r22, r16, r22 // get mask for this ipl
- bis r11, r31, r0 // return old ipl
-
- bis r16, r31, r11 // set new ps
- mtpr r22, ev5__ipl // set new mask
-
- mfpr r31, pt0 // pad ipl write
- mfpr r31, pt0 // pad ipl write
-
- hw_rei // back
-
-// .sbttl "rdps - PALcode for rdps instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- ps
-//-
-
- CALL_PAL_PRIV(PAL_RDPS_ENTRY)
-Call_Pal_Rdps:
- bis r11, r31, r0 // Fetch PALshadow PS
- nop // Must be 2 cycles long
- hw_rei
-
-// .sbttl "wrkgp - PALcode for wrkgp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// kgp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
-Call_Pal_Wrkgp:
- nop
- mtpr r16, pt_kgp
- nop // Pad for pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrusp - PALcode for wrusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// usp <- a0 (r16)
-//-
-
- CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
-Call_Pal_Wrusp:
- nop
- mtpr r16, pt_usp
- nop // Pad possible pt write->read restriction
- nop
- hw_rei
-
-// .sbttl "wrperfmon - PALcode for wrperfmon instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-//
-// Function:
-// Various control functions for the onchip performance counters
-//
-// option selector in r16
-// option argument in r17
-// returned status in r0
-//
-//
-// r16 = 0 Disable performance monitoring for one or more cpu's
-// r17 = 0 disable no counters
-// r17 = bitmask disable counters specified in bit mask (1=disable)
-//
-// r16 = 1 Enable performance monitoring for one or more cpu's
-// r17 = 0 enable no counters
-// r17 = bitmask enable counters specified in bit mask (1=enable)
-//
-// r16 = 2 Mux select for one or more cpu's
-// r17 = Mux selection (cpu specific)
-// <24:19> bc_ctl<pm_mux_sel> field (see spec)
-// <31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
-//
-// r16 = 3 Options
-// r17 = (cpu specific)
-// <0> = 0 log all processes
-// <0> = 1 log only selected processes
-// <30,9,8> mode select - ku,kp,kk
-//
-// r16 = 4 Interrupt frequency select
-// r17 = (cpu specific) indicates interrupt frequencies desired for each
-// counter, with "zero interrupts" being an option
-// frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
-//
-// r16 = 5 Read Counters
-// r17 = na
-// r0 = value (same format as ev5 pmctr)
-// <0> = 0 Read failed
-// <0> = 1 Read succeeded
-//
-// r16 = 6 Write Counters
-// r17 = value (same format as ev5 pmctr; all counters written simultaneously)
-//
-// r16 = 7 Enable performance monitoring for one or more cpu's and reset counter to 0
-// r17 = 0 enable no counters
-// r17 = bitmask enable & clear counters specified in bit mask (1=enable & clear)
-//
-//=============================================================================
-//Assumptions:
-//PMCTR_CTL:
-//
-// <15:14> CTL0 -- encoded frequency select and enable - CTR0
-// <13:12> CTL1 -- " - CTR1
-// <11:10> CTL2 -- " - CTR2
-//
-// <9:8> FRQ0 -- frequency select for CTR0 (no enable info)
-// <7:6> FRQ1 -- frequency select for CTR1
-// <5:4> FRQ2 -- frequency select for CTR2
-//
-// <0> all vs. select processes (0=all,1=select)
-//
-// where
-// FRQx<1:0>
-// 0 1 disable interrupt
-// 1 0 frequency = 65536 (16384 for ctr2)
-// 1 1 frequency = 256
-// note: FRQx<1:0> = 00 will keep counters from ever being enabled.
-//
-//=============================================================================
-//
- CALL_PAL_PRIV(0x0039)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_Wrperfmon:
-#if perfmon_debug == 0
- // "real" performance monitoring code
- cmpeq r16, 1, r0 // check for enable
- bne r0, perfmon_en // br if requested to enable
-
- cmpeq r16, 2, r0 // check for mux ctl
- bne r0, perfmon_muxctl // br if request to set mux controls
-
- cmpeq r16, 3, r0 // check for options
- bne r0, perfmon_ctl // br if request to set options
-
- cmpeq r16, 4, r0 // check for interrupt frequency select
- bne r0, perfmon_freq // br if request to change frequency select
-
- cmpeq r16, 5, r0 // check for counter read request
- bne r0, perfmon_rd // br if request to read counters
-
- cmpeq r16, 6, r0 // check for counter write request
- bne r0, perfmon_wr // br if request to write counters
-
- cmpeq r16, 7, r0 // check for counter clear/enable request
- bne r0, perfmon_enclr // br if request to clear/enable counters
-
- beq r16, perfmon_dis // br if requested to disable (r16=0)
- br r31, perfmon_unknown // br if unknown request
-#else
-
- br r31, pal_perfmon_debug
-#endif
-
-// .sbttl "rdusp - PALcode for rdusp instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- usp
-//-
-
- CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
-Call_Pal_Rdusp:
- nop
- mfpr r0, pt_usp
- hw_rei
-
-
- CALL_PAL_PRIV(0x003B)
-CallPal_OpcDec3B:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "whami - PALcode for whami instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- whami
-//-
- CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
-Call_Pal_Whami:
- nop
- mfpr r0, pt_whami // Get Whami
- extbl r0, 1, r0 // Isolate just whami bits
- hw_rei
-
-// .sbttl "retsys - PALcode for retsys instruction"
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-// 00(sp) contains return pc
-// 08(sp) contains r29
-//
-// Function:
-// Return from system call.
-// mode switched from kern to user.
-// stacks swapped, ugp, upc restored.
-// r23, r25 junked
-//-
-
- CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
-Call_Pal_Retsys:
- lda r25, osfsf_c_size(sp) // pop stack
- bis r25, r31, r14 // touch r25 & r14 to stall mf exc_addr
-
- mfpr r14, exc_addr // save exc_addr in case of fault
- ldq r23, osfsf_pc(sp) // get pc
-
- ldq r29, osfsf_gp(sp) // get gp
- stl_c r31, -4(sp) // clear lock_flag
-
- lda r11, 1<<osfps_v_mode(r31)// new PS:mode=user
- mfpr r30, pt_usp // get users stack
-
- bic r23, 3, r23 // clean return pc
- mtpr r31, ev5__ipl // zero ibox IPL - 2 bubbles to hw_rei
-
- mtpr r11, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r11, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- mtpr r23, exc_addr // set return address - 1 bubble to hw_rei
- mtpr r25, pt_ksp // save kern stack
-
- rc r31 // clear inter_flag
-// pvc_violate 248 // possible hidden mt->mf pt violation ok in callpal
- hw_rei_spe // and back
-
-
- CALL_PAL_PRIV(0x003E)
-CallPal_OpcDec3E:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rti - PALcode for rti instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// 00(sp) -> ps
-// 08(sp) -> pc
-// 16(sp) -> r29 (gp)
-// 24(sp) -> r16 (a0)
-// 32(sp) -> r17 (a1)
-// 40(sp) -> r18 (a3)
-//-
-
- CALL_PAL_PRIV(PAL_RTI_ENTRY)
-#ifdef SIMOS
- /* called once by platform_tlaser */
- .globl Call_Pal_Rti
-#endif
-Call_Pal_Rti:
- lda r25, osfsf_c_size(sp) // get updated sp
- bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
-
- mfpr r14, exc_addr // save PC in case of fault
- rc r31 // clear intr_flag
-
- ldq r12, -6*8(r25) // get ps
- ldq r13, -5*8(r25) // pc
-
- ldq r18, -1*8(r25) // a2
- ldq r17, -2*8(r25) // a1
-
- ldq r16, -3*8(r25) // a0
- ldq r29, -4*8(r25) // gp
-
- bic r13, 3, r13 // clean return pc
- stl_c r31, -4(r25) // clear lock_flag
-
- and r12, osfps_m_mode, r11 // get mode
- mtpr r13, exc_addr // set return address
-
- beq r11, rti_to_kern // br if rti to Kern
- br r31, rti_to_user // out of call_pal space
-
-
-// .sbttl "Start the Unprivileged CALL_PAL Entry Points"
-// .sbttl "bpt- PALcode for bpt instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- .text 1
-// . = 0x3000
- CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
-Call_Pal_Bpt:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bpt_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bpt_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bpt, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "bugchk- PALcode for bugchk instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
-Call_Pal_Bugchk:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_bugchk_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_bugchk_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_bugchk, r16 // set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
- CALL_PAL_UNPRIV(0x0082)
-CallPal_OpcDec82:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "callsys - PALcode for callsys instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Switch mode to kernel and build a callsys stack frame.
-// sp = ksp
-// gp = kgp
-// t8 - t10 (r22-r24) trashed
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
-Call_Pal_Callsys:
-
- and r11, osfps_m_mode, r24 // get mode
- mfpr r22, pt_ksp // get ksp
-
- beq r24, sys_from_kern // sysCall from kern is not allowed
- mfpr r12, pt_entsys // get address of callSys routine
-
-//+
-// from here on we know we are in user going to Kern
-//-
- mtpr r31, ev5__dtb_cm // set Mbox current mode - no virt ref for 2 cycles
- mtpr r31, ev5__ps // set Ibox current mode - 2 bubble to hw_rei
-
- bis r31, r31, r11 // PS=0 (mode=kern)
- mfpr r23, exc_addr // get pc
-
- mtpr r30, pt_usp // save usp
- lda sp, 0-osfsf_c_size(r22)// set new sp
-
- stq r29, osfsf_gp(sp) // save user gp/r29
- stq r24, osfsf_ps(sp) // save ps
-
- stq r23, osfsf_pc(sp) // save pc
- mtpr r12, exc_addr // set address
- // 1 cycle to hw_rei
-
- mfpr r29, pt_kgp // get the kern gp/r29
-
- hw_rei_spe // and off we go!
-
-
- CALL_PAL_UNPRIV(0x0084)
-CallPal_OpcDec84:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0085)
-CallPal_OpcDec85:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "imb - PALcode for imb instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Flush the writebuffer and flush the Icache
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
-Call_Pal_Imb:
- mb // Clear the writebuffer
- mfpr r31, ev5__mcsr // Sync with clear
- nop
- nop
- br r31, pal_ic_flush // Flush Icache
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x0087)
-CallPal_OpcDec87:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0088)
-CallPal_OpcDec88:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0089)
-CallPal_OpcDec89:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008A)
-CallPal_OpcDec8A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008B)
-CallPal_OpcDec8B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008C)
-CallPal_OpcDec8C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008D)
-CallPal_OpcDec8D:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008E)
-CallPal_OpcDec8E:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x008F)
-CallPal_OpcDec8F:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0090)
-CallPal_OpcDec90:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0091)
-CallPal_OpcDec91:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0092)
-CallPal_OpcDec92:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0093)
-CallPal_OpcDec93:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0094)
-CallPal_OpcDec94:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0095)
-CallPal_OpcDec95:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0096)
-CallPal_OpcDec96:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0097)
-CallPal_OpcDec97:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0098)
-CallPal_OpcDec98:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x0099)
-CallPal_OpcDec99:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009A)
-CallPal_OpcDec9A:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009B)
-CallPal_OpcDec9B:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009C)
-CallPal_OpcDec9C:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x009D)
-CallPal_OpcDec9D:
- br r31, osfpal_calpal_opcdec
-
-// .sbttl "rdunique - PALcode for rdunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// v0 (r0) <- unique
-//
-//-
-//
- CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
-CALL_PALrdunique_:
- mfpr r0, pt_pcbb // get pcb pointer
- ldqp r0, osfpcb_q_unique(r0) // get new value
-
- hw_rei
-
-// .sbttl "wrunique - PALcode for wrunique instruction"
-//+
-//
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// unique <- a0 (r16)
-//
-//-
-//
-CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
-CALL_PAL_Wrunique:
- nop
- mfpr r12, pt_pcbb // get pcb pointer
- stqp r16, osfpcb_q_unique(r12)// get new value
- nop // Pad palshadow write
- hw_rei // back
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00A0)
-CallPal_OpcDecA0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A1)
-CallPal_OpcDecA1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A2)
-CallPal_OpcDecA2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A3)
-CallPal_OpcDecA3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A4)
-CallPal_OpcDecA4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A5)
-CallPal_OpcDecA5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A6)
-CallPal_OpcDecA6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A7)
-CallPal_OpcDecA7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A8)
-CallPal_OpcDecA8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00A9)
-CallPal_OpcDecA9:
- br r31, osfpal_calpal_opcdec
-
-
-// .sbttl "gentrap - PALcode for gentrap instruction"
-//+
-// CALL_PAL_gentrap:
-// Entry:
-// Vectored into via hardware PALcode instruction dispatch.
-//
-// Function:
-// Build stack frame
-// a0 <- code
-// a1 <- unpred
-// a2 <- unpred
-// vector via entIF
-//
-//-
-
- CALL_PAL_UNPRIV(0x00AA)
-// unsupported in Hudson code .. pboyle Nov/95
-CALL_PAL_gentrap:
- sll r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- bis r11, r31, r12 // Save PS for stack write
- bge r25, CALL_PAL_gentrap_10_ // no stack swap needed if cm=kern
-
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r30, pt_usp // save user stack
-
- bis r31, r31, r11 // Set new PS
- mfpr r30, pt_ksp
-
-CALL_PAL_gentrap_10_:
- lda sp, 0-osfsf_c_size(sp)// allocate stack space
- mfpr r14, exc_addr // get pc
-
- stq r16, osfsf_a0(sp) // save regs
- bis r31, osf_a0_gentrap, r16// set a0
-
- stq r17, osfsf_a1(sp) // a1
- br r31, bpt_bchk_common // out of call_pal space
-
-
-// .sbttl "CALL_PAL OPCDECs"
-
- CALL_PAL_UNPRIV(0x00AB)
-CallPal_OpcDecAB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AC)
-CallPal_OpcDecAC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AD)
-CallPal_OpcDecAD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AE)
-CallPal_OpcDecAE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00AF)
-CallPal_OpcDecAF:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B0)
-CallPal_OpcDecB0:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B1)
-CallPal_OpcDecB1:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B2)
-CallPal_OpcDecB2:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B3)
-CallPal_OpcDecB3:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B4)
-CallPal_OpcDecB4:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B5)
-CallPal_OpcDecB5:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B6)
-CallPal_OpcDecB6:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B7)
-CallPal_OpcDecB7:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B8)
-CallPal_OpcDecB8:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00B9)
-CallPal_OpcDecB9:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BA)
-CallPal_OpcDecBA:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BB)
-CallPal_OpcDecBB:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BC)
-CallPal_OpcDecBC:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BD)
-CallPal_OpcDecBD:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BE)
-CallPal_OpcDecBE:
- br r31, osfpal_calpal_opcdec
-
- CALL_PAL_UNPRIV(0x00BF)
-CallPal_OpcDecBF:
- // MODIFIED BY EGH 2/25/04
- br r31, copypal_impl
-
-
-/*======================================================================*/
-/* OSF/1 CALL_PAL CONTINUATION AREA */
-/*======================================================================*/
-
- .text 2
-
- . = 0x4000
-
-
-// .sbttl "Continuation of MTPR_PERFMON"
- ALIGN_BLOCK
-#if perfmon_debug == 0
- // "real" performance monitoring code
-// mux ctl
-perfmon_muxctl:
- lda r8, 1(r31) // get a 1
- sll r8, pmctr_v_sel0, r8 // move to sel0 position
- or r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8 // build mux select mask
- and r17, r8, r25 // isolate pmctr mux select bits
- mfpr r0, ev5__pmctr
- bic r0, r8, r0 // clear old mux select bits
- or r0,r25, r25 // or in new mux select bits
- mtpr r25, ev5__pmctr
-
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned in lower longword
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, bc_ctl_v_pm_mux_sel, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
-// adapted from ev5_pal_macros.mar
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
- br r31, perfmon_success
-
-
-// requested to disable perf monitoring
-perfmon_dis:
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
-perfmon_dis_ctr0: // and begin with ctr0
- blbc r17, perfmon_dis_ctr1 // do not disable ctr0
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl0, r8
- bic r14, r8, r14 // disable ctr0
-perfmon_dis_ctr1:
- srl r17, 1, r17
- blbc r17, perfmon_dis_ctr2 // do not disable ctr1
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl1, r8
- bic r14, r8, r14 // disable ctr1
-perfmon_dis_ctr2:
- srl r17, 1, r17
- blbc r17, perfmon_dis_update // do not disable ctr2
- lda r8, 3(r31)
- sll r8, pmctr_v_ctl2, r8
- bic r14, r8, r14 // disable ctr2
-perfmon_dis_update:
- mtpr r14, ev5__pmctr // update pmctr ipr
-//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
-// adapted from ev5_pal_macros.mar
-//orig get_pmctr_ctl r8, r25 // pmctr_ctl bit in r8. adjusted impure pointer in r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);
-
- lda r17, 0x3F(r31) // build mask
- sll r17, pmctr_v_ctl2, r17 // shift mask to correct position
- and r14, r17, r14 // isolate ctl bits
- bic r8, r17, r8 // clear out old ctl bits
- or r14, r8, r14 // create shadow ctl bits
-//orig store_reg1 pmctr_ctl, r14, r25, ipr=1 // update pmctr_ctl register
-//adjusted impure pointer still in r25
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);
-
- br r31, perfmon_success
-
-
-// requested to enable perf monitoring
-//;the following code can be greatly simplified for pass2, but should work fine as is.
-
-
-perfmon_enclr:
- lda r9, 1(r31) // set enclr flag
- br perfmon_en_cont
-
-perfmon_en:
- bis r31, r31, r9 // clear enclr flag
-
-perfmon_en_cont:
- mfpr r8, pt_pcbb // get PCB base
-//orig get_pmctr_ctl r25, r25
- mfpr r25, pt_impure
- lda r25, CNS_Q_IPR(r25)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);
-
- ldqp r16, osfpcb_q_fen(r8) // read DAT/PME/FEN quadword
- mfpr r14, ev5__pmctr // read ibox pmctr ipr
- srl r16, osfpcb_v_pme, r16 // get pme bit
- mfpr r13, icsr
- and r16, 1, r16 // isolate pme bit
-
- // this code only needed in pass2 and later
-//orig sget_addr r12, 1<<icsr_v_pmp, r31
- lda r12, 1<<icsr_v_pmp(r31) // pb
- bic r13, r12, r13 // clear pmp bit
- sll r16, icsr_v_pmp, r12 // move pme bit to icsr<pmp> position
- or r12, r13, r13 // new icsr with icsr<pmp> bit set/clear
- ev5_pass2 mtpr r13, icsr // update icsr
-
-#if ev5_p1 != 0
- lda r12, 1(r31)
- cmovlbc r25, r12, r16 // r16<0> set if either pme=1 or sprocess=0 (sprocess in bit 0 of r25)
-#else
- bis r31, 1, r16 // set r16<0> on pass2 to update pmctr always (icsr provides real enable)
-#endif
-
- sll r25, 6, r25 // shift frequency bits into pmctr_v_ctl positions
- bis r14, r31, r13 // copy pmctr
-
-perfmon_en_ctr0: // and begin with ctr0
- blbc r17, perfmon_en_ctr1 // do not enable ctr0
-
- blbc r9, perfmon_en_noclr0 // enclr flag set, clear ctr0 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr0<15:0> mask
- sll r8, pmctr_v_ctr0, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr0:
-//orig get_addr r8, 3<<pmctr_v_ctl0, r31
- LDLI(r8, (3<<pmctr_v_ctl0))
- and r25, r8, r12 //isolate frequency select bits for ctr0
- bic r14, r8, r14 // clear ctl0 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl0 bits
-
-perfmon_en_ctr1: // enable ctr1
- srl r17, 1, r17 // get ctr1 enable
- blbc r17, perfmon_en_ctr2 // do not enable ctr1
-
- blbc r9, perfmon_en_noclr1 // if enclr flag set, clear ctr1 field
- lda r8, 0xffff(r31)
- zapnot r8, 3, r8 // ctr1<15:0> mask
- sll r8, pmctr_v_ctr1, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr1:
-//orig get_addr r8, 3<<pmctr_v_ctl1, r31
- LDLI(r8, (3<<pmctr_v_ctl1))
- and r25, r8, r12 //isolate frequency select bits for ctr1
- bic r14, r8, r14 // clear ctl1 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl1 bits
-
-perfmon_en_ctr2: // enable ctr2
- srl r17, 1, r17 // get ctr2 enable
- blbc r17, perfmon_en_return // do not enable ctr2 - return
-
- blbc r9, perfmon_en_noclr2 // if enclr flag set, clear ctr2 field
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
- bic r14, r8, r14 // clear ctr bits
- bic r13, r8, r13 // clear ctr bits
-
-perfmon_en_noclr2:
-//orig get_addr r8, 3<<pmctr_v_ctl2, r31
- LDLI(r8, (3<<pmctr_v_ctl2))
- and r25, r8, r12 //isolate frequency select bits for ctr2
- bic r14, r8, r14 // clear ctl2 bits in preparation for enabling
- or r14,r12,r14 // or in new ctl2 bits
-
-perfmon_en_return:
- cmovlbs r16, r14, r13 // if pme enabled, move enables into pmctr
- // else only do the counter clears
- mtpr r13, ev5__pmctr // update pmctr ipr
-
-//;this code not needed for pass2 and later, but does not hurt to leave it in
- lda r8, 0x3F(r31)
-//orig get_pmctr_ctl r25, r12 // read pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);
-
- sll r8, pmctr_v_ctl2, r8 // build ctl mask
- and r8, r14, r14 // isolate new ctl bits
- bic r25, r8, r25 // clear out old ctl value
- or r25, r14, r14 // create new pmctr_ctl
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-
-// options...
-perfmon_ctl:
-
-// set mode
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
-//orig get_addr r8, (1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk), r31 // build mode mask for pmctr register
- LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
- mfpr r0, ev5__pmctr
- and r17, r8, r25 // isolate pmctr mode bits
- bic r0, r8, r0 // clear old mode bits
- or r0, r25, r25 // or in new mode bits
- mtpr r25, ev5__pmctr
-
-//;the following code will only be used in pass2, but should not hurt anything if run in pass1.
- mfpr r8, icsr
- lda r25, 1<<icsr_v_pma(r31) // set icsr<pma> if r17<0>=0
- bic r8, r25, r8 // clear old pma bit
- cmovlbs r17, r31, r25 // and clear icsr<pma> if r17<0>=1
- or r8, r25, r8
- ev5_pass2 mtpr r8, icsr // 4 bubbles to hw_rei
- mfpr r31, pt0 // pad icsr write
- mfpr r31, pt0 // pad icsr write
-
-//;the following code not needed for pass2 and later, but should work anyway.
- bis r14, 1, r14 // set for select processes
- blbs r17, perfmon_sp // branch if select processes
- bic r14, 1, r14 // all processes
-perfmon_sp:
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
- br r31, perfmon_success
-
-// counter frequency select
-perfmon_freq:
-//orig get_pmctr_ctl r14, r12 // read shadow pmctr ctl; r12=adjusted impure pointer
- mfpr r12, pt_impure
- lda r12, CNS_Q_IPR(r12)
- RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);
-
- lda r8, 0x3F(r31)
-//orig sll r8, pmctr_ctl_v_frq2, r8 // build mask for frequency select field
-// I guess this should be a shift of 4 bits from the above control register structure .. pb
-#define pmctr_ctl_v_frq2_SHIFT 4
- sll r8, pmctr_ctl_v_frq2_SHIFT, r8 // build mask for frequency select field
-
- and r8, r17, r17
- bic r14, r8, r14 // clear out old frequency select bits
-
- or r17, r14, r14 // or in new frequency select info
-//orig store_reg1 pmctr_ctl, r14, r12, ipr=1 // update pmctr_ctl register
- SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
-
- br r31, perfmon_success
-
-// read counters
-perfmon_rd:
- mfpr r0, ev5__pmctr
- or r0, 1, r0 // or in return status
- hw_rei // back to user
-
-// write counters
-perfmon_wr:
- mfpr r14, ev5__pmctr
- lda r8, 0x3FFF(r31) // ctr2<13:0> mask
- sll r8, pmctr_v_ctr2, r8
-
-//orig get_addr r9, 0xFFFFFFFF, r31, verify=0 // ctr2<15:0>,ctr1<15:0> mask
- LDLI(r9, (0xFFFFFFFF))
- sll r9, pmctr_v_ctr1, r9
- or r8, r9, r8 // or ctr2, ctr1, ctr0 mask
- bic r14, r8, r14 // clear ctr fields
- and r17, r8, r25 // clear all but ctr fields
- or r25, r14, r14 // write ctr fields
- mtpr r14, ev5__pmctr // update pmctr ipr
-
- mfpr r31, pt0 // pad pmctr write (needed only to keep PVC happy)
-
-perfmon_success:
- or r31, 1, r0 // set success
- hw_rei // back to user
-
-perfmon_unknown:
- or r31, r31, r0 // set fail
- hw_rei // back to user
-
-#else
-
-// end of "real code", start of debug code
-
-//+
-// Debug environment:
-// (in pass2, always set icsr<pma> to ensure master counter enable is on)
-// R16 = 0 Write to on-chip performance monitor ipr
-// r17 = on-chip ipr
-// r0 = return value of read of on-chip performance monitor ipr
-// R16 = 1 Setup Cbox mux selects
-// r17 = Cbox mux selects in same position as in bc_ctl ipr.
-// r0 = return value of read of on-chip performance monitor ipr
-//
-//-
-pal_perfmon_debug:
- mfpr r8, icsr
- lda r9, 1<<icsr_v_pma(r31)
- bis r8, r9, r8
- mtpr r8, icsr
-
- mfpr r0, ev5__pmctr // read old value
- bne r16, cbox_mux_sel
-
- mtpr r17, ev5__pmctr // update pmctr ipr
- br r31, end_pm
-
-cbox_mux_sel:
- // ok, now tackle cbox mux selects
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-//orig get_bc_ctl_shadow r16 // bc_ctl returned
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);
-
- lda r8, 0x3F(r31) // build mux select mask
- sll r8, BC_CTL_V_PM_MUX_SEL, r8
-
- and r17, r8, r25 // isolate bc_ctl mux select bits
- bic r16, r8, r16 // isolate old mux select bits
- or r16, r25, r25 // create new bc_ctl
- mb // clear out cbox for future ipr write
- stqp r25, ev5__bc_ctl(r14) // store to cbox ipr
- mb // clear out cbox for future ipr write
-//orig update_bc_ctl_shadow r25, r16 // r25=value, r16-overwritten with adjusted impure ptr
- mfpr r16, pt_impure
- lda r16, CNS_Q_IPR(r16)
- SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);
-
-end_pm: hw_rei
-
-#endif
-
-
-//;The following code is a workaround for a cpu bug where Istream prefetches to
-//;super-page address space in user mode may escape off-chip.
-#if spe_fix != 0
-
- ALIGN_BLOCK
-hw_rei_update_spe:
- mfpr r12, pt_misc // get previous mode
- srl r11, osfps_v_mode, r10 // isolate current mode bit
- and r10, 1, r10
- extbl r12, 7, r8 // get previous mode field
- and r8, 1, r8 // isolate previous mode bit
- cmpeq r10, r8, r8 // compare previous and current modes
- beq r8, hw_rei_update_spe_5_
- hw_rei // if same, just return
-
-hw_rei_update_spe_5_:
-
-#if fill_err_hack != 0
-
- fill_error_hack
-#endif
-
- mfpr r8, icsr // get current icsr value
- ldah r9, (2<<(icsr_v_spe-16))(r31) // get spe bit mask
- bic r8, r9, r8 // disable spe
- xor r10, 1, r9 // flip mode for new spe bit
- sll r9, icsr_v_spe+1, r9 // shift into position
- bis r8, r9, r8 // enable/disable spe
- lda r9, 1(r31) // now update our flag
- sll r9, pt_misc_v_cm, r9 // previous mode saved bit mask
- bic r12, r9, r12 // clear saved previous mode
- sll r10, pt_misc_v_cm, r9 // current mode saved bit mask
- bis r12, r9, r12 // set saved current mode
- mtpr r12, pt_misc // update pt_misc
- mtpr r8, icsr // update icsr
-
-#if osf_chm_fix != 0
-
-
- blbc r10, hw_rei_update_spe_10_ // branch if not user mode
-
- mb // ensure no outstanding fills
- lda r12, 1<<dc_mode_v_dc_ena(r31) // User mode
- mtpr r12, dc_mode // Turn on dcache
- mtpr r31, dc_flush // and flush it
- br r31, pal_ic_flush
-
-hw_rei_update_spe_10_: mfpr r9, pt_pcbb // Kernel mode
- ldqp r9, osfpcb_q_Fen(r9) // get FEN
- blbc r9, pal_ic_flush // return if FP disabled
- mb // ensure no outstanding fills
- mtpr r31, dc_mode // turn off dcache
-#endif
-
-
- br r31, pal_ic_flush // Pal restriction - must flush Icache if changing ICSR<SPE>
-#endif
-
-
-copypal_impl:
- mov r16, r0
- bic r18, 63, r8
- and r18, 63, r18
- beq r8, cache_copy_done
-cache_loop:
- ldf f17, 0(r16)
- stf f17, 0(r16)
- addq r17, 64, r17
- addq r16, 64, r16
- subq r8, 64, r8
- bne r8, cache_loop
-cache_copy_done:
- ble r18, finished #if len <=0 we are finished
- ldq_u r8, 0(r17)
- xor r17, r16, r9
- and r9, 7, r9
- and r16, 7, r10
- bne r9, unaligned
- beq r10, aligned
- ldq_u r9, 0(r16)
- addq r18, r10, r18
- mskqh r8, r17, r8
- mskql r9, r17, r9
- bis r8, r9, r8
-aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, aligned_done
-loop:
- stq_u r8, 0(r16)
- ldq_u r8, 8(r17)
- subq r10, 8, r10
- lda r16,8(r16)
- lda r17,8(r17)
- bne r10, loop
-aligned_done:
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
- few_left:
- mskql r8, r18, r10
- ldq_u r9, 0(r16)
- mskqh r9, r18, r9
- bis r10, r9, r10
- stq_u r10, 0(r16)
- br r31, finished
-unaligned:
- addq r17, r18, r25
- cmpule r18, 8, r9
- bne r9, unaligned_few_left
- beq r10, unaligned_dest_aligned
- and r16, 7, r10
- subq r31, r10, r10
- addq r10, 8, r10
- ldq_u r9, 7(r17)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r12
- insql r12, r16, r12
- ldq_u r13, 0(r16)
- mskql r13, r16, r13
- bis r12, r13, r12
- stq_u r12, 0(r16)
- addq r16, r10, r16
- addq r17, r10, r17
- subq r18, r10, r18
- ldq_u r8, 0(r17)
-unaligned_dest_aligned:
- subq r18, 1, r10
- bic r10, 7, r10
- and r18, 7, r18
- beq r10, unaligned_partial_left
-unaligned_loop:
- ldq_u r9, 7(r17)
- lda r17, 8(r17)
- extql r8, r17, r12
- extqh r9, r17, r13
- subq r10, 8, r10
- bis r12, r13, r13
- stq r13, 0(r16)
- lda r16, 8(r16)
- beq r10, unaligned_second_partial_left
- ldq_u r8, 7(r17)
- lda r17, 8(r17)
- extql r9, r17, r12
- extqh r8, r17, r13
- bis r12, r13, r13
- subq r10, 8, r10
- stq r13, 0(r16)
- lda r16, 8(r16)
- bne r10, unaligned_loop
-unaligned_partial_left:
- mov r8, r9
-unaligned_second_partial_left:
- ldq_u r8, -1(r25)
- extql r9, r17, r9
- extqh r8, r17, r8
- bis r8, r9, r8
- bne r18, few_left
- stq_u r8, 0(r16)
- br r31, finished
-unaligned_few_left:
- ldq_u r9, -1(r25)
- extql r8, r17, r8
- extqh r9, r17, r9
- bis r8, r9, r8
- insqh r8, r16, r9
- insql r8, r16, r8
- lda r12, -1(r31)
- mskql r12, r18, r13
- cmovne r13, r13, r12
- insqh r12, r16, r13
- insql r12, r16, r12
- addq r16, r18, r10
- ldq_u r14, 0(r16)
- ldq_u r25, -1(r10)
- bic r14, r12, r14
- bic r25, r13, r25
- and r8, r12, r8
- and r9, r13, r9
- bis r8, r14, r8
- bis r9, r25, r9
- stq_u r9, -1(r10)
- stq_u r8, 0(r16)
-finished:
- hw_rei
diff --git a/system/alpha/palcode/platform_m5.S b/system/alpha/palcode/platform_m5.S
new file mode 100644
index 000000000..6c4e85b1c
--- /dev/null
+++ b/system/alpha/palcode/platform_m5.S
@@ -0,0 +1,2726 @@
+// build_fixed_image: not sure what means
+// real_mm to be replaced during rewrite
+// remove_save_state remove_restore_state can be remooved to save space ??
+
+
+#define egore 0
+#define acore 0
+#define beh_model 0
+#define ev5_p2 1
+#define ev5_p1 0
+#define ldvpte_bug_fix 1
+#define spe_fix 0
+#define osf_chm_fix 0
+#define build_fixed_image 0
+#define enable_p4_fixups 0
+#define osf_svmin 1
+#define enable_physical_console 0
+#define fill_err_hack 0
+#define icflush_on_tbix 0
+#define max_cpuid 1
+#define perfmon_debug 0
+#define rax_mode 0
+
+#define hw_rei_spe hw_rei
+
+#include "ev5_defs.h"
+#include "ev5_impure.h"
+#include "ev5_alpha_defs.h"
+#include "ev5_paldef.h"
+#include "ev5_osfalpha_defs.h"
+#include "fromHudsonMacros.h"
+#include "fromHudsonOsf.h"
+#include "dc21164FromGasSources.h"
+#include "cserve.h"
+#include "tlaserreg.h"
+//#include "simos.h"
+
+
+#define ldlp ldl_p
+#define ldqp ldq_p
+
+#define stlp stl_p
+#define stqp stq_p
+#define stqpc stqp
+
+#ifdef SIMOS
+#define ldqpl ldq_p
+#define sdqpl sdq_p
+#else
+<--bomb>
+#endif
+
+#define pt_entInt pt_entint
+#define pt_entArith pt_entarith
+#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8)
+#define mchk_flag CNS_Q_FLAG
+#define mchk_sys_base 56
+#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
+#define mchk_offsets CNS_Q_EXC_ADDR
+#define mchk_mchk_code 8
+#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
+#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
+#define mchk_sc_addr CNS_Q_SC_ADDR
+#define mchk_sc_stat CNS_Q_SC_STAT
+#define mchk_ei_addr CNS_Q_EI_ADDR
+#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
+#define mchk_fill_syn CNS_Q_FILL_SYN
+#define mchk_ei_stat CNS_Q_EI_STAT
+#define mchk_exc_addr CNS_Q_EXC_ADDR
+#define mchk_ld_lock CNS_Q_LD_LOCK
+#define osfpcb_q_Ksp pcb_q_ksp
+#define pal_impure_common_size ((0x200 + 7) & 0xfff8)
+
+#define ALIGN_BLOCK \
+ .align 5
+
+#define ALIGN_BRANCH \
+ .align 3
+
+#define EXPORT(_x) \
+ .align 5; \
+ .globl _x; \
+_x:
+
+// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+// XXX the following is 'made up'
+// XXX bugnion
+
+// XXX bugnion not sure how to align 'quad'
+#define ALIGN_QUAD \
+ .align 3
+
+#define ALIGN_128 \
+ .align 7
+
+
+#define GET_IMPURE(_r) mfpr _r,pt_impure
+#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2)
+
+
+#define BIT(_x) (1<<(_x))
+
+
+// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+// XXX back to original code
+
+// .sbttl "System specific code - beh model version"
+
+//
+// Entry points
+// SYS$CFLUSH - Cache flush
+// SYS$CSERVE - Console service
+// SYS$WRIPIR - interprocessor interrupts
+// SYS$HALT_INTERRUPT - Halt interrupt
+// SYS$PASSIVE_RELEASE - Interrupt, passive release
+// SYS$INTERRUPT - Interrupt
+// SYS$RESET - Reset
+// SYS$ENTER_CONSOLE
+
+//
+// Macro to read TLINTRSUMx
+//
+// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
+//
+// Assumed register usage:
+// rsum TLINTRSUMx contents
+// raddr node space address
+// scratch scratch register
+
+
+// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2
+//
+// nop
+// mfpr 'scratch', pt_whami // Get our whami (VID)
+//
+// extbl 'scratch', #1, 'scratch' // shift down to bit 0
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// srl 'scratch', #1, 'rsum' // Shift off the cpu number
+//
+// sll 'rsum', #22, 'rsum' // Get our node offset
+// addq 'raddr', 'rsum', 'raddr' // Get our base node space address
+//
+// blbs 'scratch', label1
+// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
+//
+// br r31, label2
+//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
+//
+//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg
+//.endm
+
+#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \
+ nop; \
+ mfpr _scratch,pt_whami; \
+ extbl _scratch,1,_scratch; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ srl _scratch,1,_rsum; \
+ sll _rsum,22,_rsum; \
+ addq _raddr,_rsum,_raddr; \
+ blbs _scratch,1f; \
+ lda _raddr,0x1180(_raddr); \
+ br r31,2f; \
+1: \
+ lda _raddr,0x11c0(_raddr); \
+2: ldlp _rsum,0(_raddr)
+
+
+
+//
+// Macro to write TLINTRSUMx
+//
+// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
+//
+// Assumed register usage:
+// rsum TLINTRSUMx write data
+// raddr node space address
+// scratch scratch register
+
+// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2
+//
+// nop
+// mfpr 'whami', pt_whami // Get our whami (VID)
+//
+// extbl 'whami', #1, 'whami' // shift down to bit 0
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// blbs 'whami', label1
+//
+// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
+// br r31, label2
+//
+// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
+// label2: srl 'whami', #1, 'whami' // Shift off the cpu number
+//
+// sll 'whami', #22, 'whami' // Get our node offset
+// addq 'raddr', 'whami', 'raddr' // Get our base node space address
+//
+// mb
+// stqp 'rsum', 0('raddr') // write the right tlintrsum reg
+// mb
+// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum
+// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo
+// .endm
+
+
+#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \
+ nop; \
+ mfpr _whami,pt_whami; \
+ extbl _whami,1,_whami; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ blbs _whami,1f; \
+ lda _raddr,0x1180(_raddr);\
+ br zero,2f; \
+1: lda _raddr,0x11c0(_raddr);\
+2: srl _whami,1,_whami; \
+ addq _raddr,_whami,_raddr; \
+ mb; \
+ stqp _rsum,0(_raddr); \
+ ldqp _rsum,0(_raddr); \
+ bis _rsum,_rsum,_rsum
+
+
+//
+// Macro to determine highest priority TIOP Node ID from interrupt pending mask
+//
+// Assumed register usage:
+// rmask - TLINTRSUMx contents, shifted to isolate IOx bits
+// rid - TLSB Node ID of highest TIOP
+
+//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
+// srl 'rmask', #4, 'rid' // check IOP8
+// blbc 'rid', l1 // not IOP8
+//
+// lda 'rid', 8(r31) // IOP8
+// br r31, l6
+//
+// l1: srl 'rmask', #3, 'rid' // check IOP7
+// blbc 'rid', l2 // not IOP7
+//
+// lda 'rid', 7(r31) // IOP7
+// br r31, l6
+//
+// l2: srl 'rmask', #2, 'rid' // check IOP6
+// blbc 'rid', l3 // not IOP6
+//
+// lda 'rid', 6(r31) // IOP6
+// br r31, l6
+//
+// l3: srl 'rmask', #1, 'rid' // check IOP5
+// blbc 'rid', l4 // not IOP5
+//
+// lda 'rid', 5(r31) // IOP5
+// br r31, l6
+//
+// l4: srl 'rmask', #0, 'rid' // check IOP4
+// blbc 'rid', l5 // not IOP4
+//
+// lda r14, 4(r31) // IOP4
+// br r31, l6
+//
+// l5: lda r14, 0(r31) // passive release
+// l6:
+// .endm
+
+
+#define Intr_Find_TIOP(_rmask,_rid) \
+ srl _rmask,3,_rid; \
+ blbc _rid,1f; \
+ lda _rid,8(zero); \
+ br zero,6f; \
+1: srl _rmask,3,_rid; \
+ blbc _rid, 2f; \
+ lda _rid, 7(r31); \
+ br r31, 6f; \
+2: srl _rmask, 2, _rid; \
+ blbc _rid, 3f; \
+ lda _rid, 6(r31); \
+ br r31, 6f; \
+3: srl _rmask, 1, _rid; \
+ blbc _rid, 4f; \
+ lda _rid, 5(r31); \
+ br r31, 6f; \
+4: srl _rmask, 0, _rid; \
+ blbc _rid, 5f; \
+ lda r14, 4(r31); \
+ br r31, 6f; \
+5: lda r14, 0(r31); \
+6:
+
+
+
+
+//
+// Macro to calculate base node space address for given node id
+//
+// Assumed register usage:
+// rid - TLSB node id
+// raddr - base node space address
+
+//.macro Get_TLSB_Node_Address rid, raddr
+// sll 'rid', #22, 'rid' // Get offset of IOP node
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address
+// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id
+//.endm
+
+
+#define turbo_pcia_intr_fix 0
+
+
+#if turbo_pcia_intr_fix != 0
+#define Get_TLSB_Node_Address(_rid,_raddr) \
+ sll _rid,22,_rid; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ addq _raddr,_rid,_raddr; \
+ srl _rid,22,_rid
+#else
+#define Get_TLSB_Node_Address(_rid,_raddr) \
+ sll _rid,22,_rid; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ addq _raddr,_rid,_raddr
+#endif
+
+
+
+
+
+// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
+// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31)
+// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31)
+// or 'rs1', 'nodebase', 'rs1'
+// ldlp 'rs', 0('rs1')
+// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame
+// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame
+// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear
+// .endm
+
+
+// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
+// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
+// .endm
+
+#define CONCAT(_a,_b) _a ## _b
+
+#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog)
+
+
+#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
+
+
+// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
+// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
+// .endm
+
+#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
+
+#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
+
+#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \
+ stlp _rs,0(_rs1)
+
+
+#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
+#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
+#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)
+
+
+
+
+// .macro save_pcia_intr irq
+// and r13, #^xf, r25 // isolate low 4 bits
+// addq r14, #4, r14 // format the TIOP Node id field
+// sll r14, #4, r14 // shift the TIOP Node id
+// or r14, r25, r10 // merge Node id/hose/HPC
+// mfpr r14, pt14 // get saved value
+// extbl r14, #'irq', r25 // confirm none outstanding
+// bne r25, sys$machine_check_while_in_pal
+// insbl r10, #'irq', r10 // align new info
+// or r14, r10, r14 // merge info
+// mtpr r14, pt14 // save it
+// bic r13, #^xf, r13 // clear low 4 bits of vector
+// .endm
+
+#define save_pcia_intr(_irq) \
+ and r13, 0xf, r25; \
+ addq r14, 4, r14; \
+ sll r14, 4, r14; \
+ or r14, r25, r10; \
+ mfpr r14, pt14; \
+ extbl r14, _irq, r25; \
+ bne r25, sys_machine_check_while_in_pal; \
+ insbl r10, _irq, r10; \
+ or r14, r10, r14; \
+ mtpr r14, pt14; \
+ bic r13, 0xf, r13
+
+
+
+ ALIGN_BLOCK
+
+// .sbttl "wripir - PALcode for wripir instruction"
+//orig SYS$WRIPIR: // R16 has the processor number.
+
+EXPORT(sys_wripir)
+
+//++
+// Convert the processor number to a CPU mask
+//--
+
+ and r16,0x3, r14 // mask the top stuff (4 CPUs supported)
+ bis r31,0x1,r16 // get a one
+ sll r16,r14,r14 // shift the bit to the right place
+ sll r14,12,r14
+
+
+//++
+// Build the Broadcast Space base address
+//--
+ lda r16,0xf01(r31)
+ sll r16,32,r16
+ ldah r13,0xa0(r31)
+ sll r13,8,r13
+ bis r16,r13,r16
+ lda r16,0x0080(r16)
+
+//++
+// Send out the IP Intr
+//--
+ stqp r14, 0(r16) // Tsunami MISC Register
+ wmb // Push out the store
+
+ hw_rei
+
+
+ ALIGN_BLOCK
+// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
+//+
+// SYS$CFLUSH
+// Entry:
+//
+// R16 - contains the PFN of the page to be flushed
+//
+// Function:
+// Flush all Dstream caches of 1 entire page
+//
+//-
+
+EXPORT(sys_cflush)
+
+// #convert pfn to addr, and clean off <63:20>
+// #sll r16, <page_offset_size_bits>+<63-20>>, r12
+ sll r16, page_offset_size_bits+(63-20),r12
+
+// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
+// # stolen from srcmax code. XXX bugnion
+ lda r13, 0x10(r31) // assume 16Mbytes of cache
+ sll r13, 20, r13 // convert to bytes
+
+
+ srl r12, 63-20, r12 // shift back to normal position
+ xor r12, r13, r12 // xor addr<18>
+
+ or r31, 8192/(32*8), r13 // get count of loads
+ nop
+
+cflush_loop:
+ subq r13, 1, r13 // decr counter
+ mfpr r25, ev5__intid // Fetch level of interruptor
+
+ ldqp r31, 32*0(r12) // do a load
+ ldqp r31, 32*1(r12) // do next load
+
+ ldqp r31, 32*2(r12) // do next load
+ ldqp r31, 32*3(r12) // do next load
+
+ ldqp r31, 32*4(r12) // do next load
+ ldqp r31, 32*5(r12) // do next load
+
+ ldqp r31, 32*6(r12) // do next load
+ ldqp r31, 32*7(r12) // do next load
+
+ mfpr r14, ev5__ipl // Fetch current level
+ lda r12, (32*8)(r12) // skip to next cache block addr
+
+ cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl
+ beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???
+
+ bne r13, cflush_loop // loop till done
+ hw_rei // back to user
+
+ ALIGN_BRANCH
+1: // Here if interrupted
+ mfpr r12, exc_addr
+ subq r12, 4, r12 // Backup PC to point to CFLUSH
+
+ mtpr r12, exc_addr
+ nop
+
+ mfpr r31, pt0 // Pad exc_addr write
+ hw_rei
+
+
+ ALIGN_BLOCK
+// .sbttl "CSERVE- PALcode for CSERVE instruction"
+//+
+// SYS$CSERVE
+//
+// Function:
+// Various functions for private use of console software
+//
+// option selector in r0
+// arguments in r16....
+//
+//
+// r0 = 0 unknown
+//
+// r0 = 1 ldqp
+// r0 = 2 stqp
+// args, are as for normal STQP/LDQP in VMS PAL
+//
+// r0 = 3 dump_tb's
+// r16 = detination PA to dump tb's to.
+//
+// r0<0> = 1, success
+// r0<0> = 0, failure, or option not supported
+// r0<63:1> = (generally 0, but may be function dependent)
+// r0 - load data on ldqp
+//
+//-
+EXPORT(sys_cserve)
+
+#ifdef SIMOS
+ /* taken from scrmax */
+ cmpeq r18, CSERVE_K_RD_IMPURE, r0
+ bne r0, Sys_Cserve_Rd_Impure
+
+ cmpeq r18, CSERVE_K_JTOPAL, r0
+ bne r0, Sys_Cserve_Jtopal
+ call_pal 0
+
+ or r31, r31, r0
+ hw_rei // and back we go
+
+Sys_Cserve_Rd_Impure:
+ mfpr r0, pt_impure // Get base of impure scratch area.
+ hw_rei
+
+ ALIGN_BRANCH
+
+Sys_Cserve_Jtopal:
+ bic a0, 3, t8 // Clear out low 2 bits of address
+ bis t8, 1, t8 // Or in PAL mode bit
+ mtpr t8,exc_addr
+ hw_rei
+
+
+#else /* SIMOS */
+
+ cmpeq r16, cserve_ldlp, r12 // check for ldqp
+ bne r12, 1f // br if
+
+ cmpeq r16, cserve_stlp, r12 // check for stqp
+ bne r12, 2f // br if
+
+ cmpeq r16, cserve_callback, r12 // check for callback entry
+ bne r12, csrv_callback // br if
+
+ cmpeq r16, cserve_identify, r12 // check for callback entry
+ bne r12, csrv_identify // br if
+
+ or r31, r31, r0 // set failure
+ nop // pad palshadow write
+
+ hw_rei // and back we go
+#endif /* SIMOS */
+
+// ldqp
+ ALIGN_QUAD
+1:
+ ldqp r0,0(r17) // get the data
+ nop // pad palshadow write
+
+ hw_rei // and back we go
+
+
+// stqp
+ ALIGN_QUAD
+2:
+ stqp r18, 0(r17) // store the data
+#ifdef SIMOS
+ lda r0,17(r31) // bogus
+#else
+ lda r0, CSERVE_SUCCESS(r31) // set success
+#endif
+ hw_rei // and back we go
+
+
+ ALIGN_QUAD
+csrv_callback:
+ ldq r16, 0(r17) // restore r16
+ ldq r17, 8(r17) // restore r17
+ lda r0, hlt_c_callback(r31)
+ br r31, sys_enter_console
+
+
+csrv_identify:
+ mfpr r0, pal_base
+ ldqp r0, 8(r0)
+ hw_rei
+
+
+// dump tb's
+ ALIGN_QUAD
+0:
+ // DTB PTEs - 64 entries
+ addq r31, 64, r0 // initialize loop counter
+ nop
+
+1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp
+ mfpr r12, ev5__dtb_pte // read out next pte to reg file
+
+ subq r0, 1, r0 // decrement loop counter
+ nop // Pad - no Mbox instr in cycle after mfpr
+
+ stqp r12, 0(r16) // store out PTE
+ addq r16, 8 ,r16 // increment pointer
+
+ bne r0, 1b
+
+ ALIGN_BRANCH
+ // ITB PTEs - 48 entries
+ addq r31, 48, r0 // initialize loop counter
+ nop
+
+2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp
+ mfpr r12, ev5__itb_pte // read out next pte to reg file
+
+ subq r0, 1, r0 // decrement loop counter
+ nop //
+
+ stqp r12, 0(r16) // store out PTE
+ addq r16, 8 ,r16 // increment pointer
+
+ bne r0, 2b
+ or r31, 1, r0 // set success
+
+ hw_rei // and back we go
+
+
+// .sbttl "SYS$INTERRUPT - Interrupt processing code"
+
+//+
+// SYS$INTERRUPT
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12, r14 - available
+// r13 - INTID (new EV5 IPL)
+// r25 - ISR
+// r16, r17, r18 - available
+//
+//-
+
+
+EXPORT(sys_interrupt)
+ cmpeq r13, 31, r12
+ bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)
+
+ cmpeq r13, 30, r12
+ bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail)
+
+ cmpeq r13, 29, r12
+ bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters)
+
+ cmpeq r13, 23, r12
+ bne r12, sys_int_23 // Check for level 23 interrupt
+ // IPI in Tsunami
+
+ cmpeq r13, 22, r12
+ bne r12, sys_int_22 // Check for level 22 interrupt
+ // timer interrupt
+
+ cmpeq r13, 21, r12
+ bne r12, sys_int_21 // Check for level 21 interrupt
+ // I/O
+
+ cmpeq r13, 20, r12
+ bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected
+ // system error interrupt)
+
+ mfpr r14, exc_addr // ooops, something is wrong
+ br r31, pal_pal_bug_check_from_int
+
+
+
+
+//+
+//sys$int_2*
+// Routines to handle device interrupts at IPL 23-20.
+// System specific method to ack/clear the interrupt, detect passive release,
+// detect interprocessor (22), interval clock (22), corrected
+// system error (20)
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12, r14 - available
+// r13 - INTID (new EV5 IPL)
+// r25 - ISR
+//
+// On exit:
+// Interrupt has been ack'd/cleared
+// a0/r16 - signals IO device interrupt
+// a1/r17 - contains interrupt vector
+// exit to ent_int address
+//
+//-
+ ALIGN_BRANCH
+sys_int_23:
+ or r31,0,r16 // IPI interrupt A0 = 0
+ lda r12,0xf01(r31) // build up an address for the MISC register
+ sll r12,16,r12
+ lda r12,0xa000(r12)
+ sll r12,16,r12
+ lda r12,0x080(r12)
+
+ mfpr r10, pt_whami // get CPU ID
+ extbl r10, 1, r10 // Isolate just whami bits
+ or r31,0x1,r14 // load r14 with bit to clear
+ sll r14,r10,r14 // left shift by CPU ID
+ sll r14,8,r14
+ stq_p r14, 0(r12) // clear the rtc interrupt
+
+ br r31, pal_post_interrupt // Notify the OS
+
+
+ ALIGN_BRANCH
+sys_int_22:
+ or r31,1,r16 // a0 means it is a clock interrupt
+ lda r12,0xf01(r31) // build up an address for the MISC register
+ sll r12,16,r12
+ lda r12,0xa000(r12)
+ sll r12,16,r12
+ lda r12,0x080(r12)
+
+ mfpr r10, pt_whami // get CPU ID
+ extbl r10, 1, r10 // Isolate just whami bits
+ or r31,0x10,r14 // load r14 with bit to clear
+ sll r14,r10,r14 // left shift by CPU ID
+ stq_p r14, 0(r12) // clear the rtc interrupt
+
+ br r31, pal_post_interrupt // Tell the OS
+
+
+ ALIGN_BRANCH
+sys_int_20:
+ Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
+ srl r13, 12, r13 // shift down to examine IPL15
+
+ Intr_Find_TIOP(r13,r14)
+ beq r14, 1f
+
+ Get_TLSB_Node_Address(r14,r10)
+ lda r10, 0xa40(r10) // Get base TLILID address
+
+ ldlp r13, 0(r10) // Read the TLILID register
+#if turbo_pcia_intr_fix == 0
+//orig .if eq turbo_pcia_intr_fix
+ bne r13, pal_post_dev_interrupt
+//orig .iff
+ beq r13, 1f
+
+ and r13, 0x3, r10 // check for PCIA bits
+ beq r10, pal_post_dev_interrupt // done if nothing set
+ save_pcia_intr(1)
+ br r31, pal_post_dev_interrupt //
+// orig .endc
+#endif /* turbo_pcia_intr_fix == 0 */
+
+1: lda r16, osfint_c_passrel(r31) // passive release
+ br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+sys_int_21:
+
+ lda r12,0xf01(r31)
+ sll r12,32,r12
+ ldah r13,0xa0(r31)
+ sll r13,8,r13
+ bis r12,r13,r12
+ lda r12,0x0080(r12)
+ mfpr r13, pt_whami // get CPU ID
+ extbl r13, 1, r13 // Isolate just whami bits
+
+ and r13,0x1,r14 // grab LSB and shift left 6
+ sll r14,6,r14
+ and r13,0x2,r10 // grabl LSB+1 and shift left 9
+ sll r10,9,r10
+
+ mskbl r12,0,r12 // calculate DIRn address
+ lda r13,0x280(r31)
+ bis r12,r13,r12
+ or r12,r14,r12
+ or r12,r10,r12
+ ldqp r13, 0(r12) // read DIRn
+
+ or r31,1,r14 // set bit 55 (ISA Interrupt)
+ sll r14,55,r14
+
+ and r13, r14, r14 // check if bit 55 is set
+ lda r16,0x900(r31) // load offset for normal into r13
+ beq r14, normal_int // if not compute the vector normally
+
+ lda r16,0x800(r31) // replace with offset for pic
+ lda r12,0xf01(r31) // build an addr to access PIC
+ sll r12,32,r12 // at f01fc000000
+ ldah r13,0xfc(r31)
+ sll r13,8,r13
+ bis r12,r13,r12
+ ldqp r13,0x0020(r12) // read PIC1 ISR for interrupting dev
+
+normal_int:
+ //ctlz r13,r14 // count the number of leading zeros
+ // EV5 doesn't have ctlz, but we do, so lets use it
+ .byte 0x4e
+ .byte 0x06
+ .byte 0xed
+ .byte 0x73
+ lda r10,63(r31)
+ subq r10,r14,r17 // subtract from
+
+ lda r13,0x10(r31)
+ mulq r17,r13,r17 // compute 0x900 + (0x10 * Highest DIRn-bit)
+ addq r17,r16,r17
+
+ or r31,3,r16 // a0 means it is a I/O interrupt
+
+ br r31, pal_post_interrupt
+
+ ALIGN_BRANCH
+pal_post_dev_interrupt:
+ or r13, r31, r17 // move vector to a1
+ or r31, osfint_c_dev, r16 // a0 signals IO device interrupt
+
+pal_post_interrupt:
+ mfpr r12, pt_entint
+
+ mtpr r12, exc_addr
+
+ nop
+ nop
+
+ hw_rei_spe
+
+
+
+//+
+// sys_passive_release
+// Just pretend the interrupt never occurred.
+//-
+
+EXPORT(sys_passive_release)
+ mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps
+ nop
+
+ mfpr r31, pt0 // Pad write to dtb_cm
+ hw_rei
+
+//+
+//sys_int_powerfail
+// A powerfail interrupt has been detected. The stack has been pushed.
+// IPL and PS are updated as well.
+//
+// I'm not sure what to do here, I'm treating it as an IO device interrupt
+//
+//-
+
+ ALIGN_BLOCK
+sys_int_powerfail:
+ lda r12, 0xffc4(r31) // get GBUS_MISCR address bits
+ sll r12, 24, r12 // shift to proper position
+ ldqp r12, 0(r12) // read GBUS_MISCR
+ srl r12, 5, r12 // isolate bit <5>
+ blbc r12, 1f // if clear, no missed mchk
+
+ // Missed a CFAIL mchk
+ lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits
+ sll r13, 24, r13 // shift to proper position
+ lda r14, 0x40(r31) // get bit <6> mask
+ ldqp r12, 0(r13) // read GBUS$SERNUM
+ or r12, r14, r14 // set bit <6>
+ stqp r14, 0(r13) // clear GBUS$SERNUM<6>
+ mb
+ mb
+
+1: br r31, sys_int_mchk // do a machine check
+
+ lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector
+ mfpr r25, pt_entint
+
+ lda r16, osfint_c_dev(r31) // a0 to device code
+ mtpr r25, exc_addr
+
+ nop // pad exc_addr write
+ nop
+
+ hw_rei_spe
+
+//+
+// sys$halt_interrupt
+// A halt interrupt has been detected. Pass control to the console.
+//
+//
+//-
+ EXPORT(sys_halt_interrupt)
+
+ ldah r13, 0x1800(r31) // load Halt/^PHalt bits
+ Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits
+
+ mtpr r11, dtb_cm // Restore Mbox current mode
+ nop
+ nop
+ mtpr r0, pt0
+#ifndef SIMOS
+ pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt
+ br r31, sys_enter_console // enter the console
+
+
+
+//+
+// sys$int_mchk_or_crd
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12
+// r13 - INTID (new EV5 IPL)
+// r14 - exc_addr
+// r25 - ISR
+// r16, r17, r18 - available
+//
+//-
+ ALIGN_BLOCK
+
+sys_int_mchk_or_crd:
+ srl r25, isr_v_mck, r12
+ blbs r12, sys_int_mchk
+ //+
+ // Not a Machine check interrupt, so must be an Internal CRD interrupt
+ //-
+
+ mb //Clear out Cbox prior to reading IPRs
+ srl r25, isr_v_crd, r13 //Check for CRD
+ blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!!
+
+ lda r9, 1(r31)
+ sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd
+ mtpr r9, ev5__hwint_clr // ack the crd interrupt
+
+ or r31, r31, r12 // clear flag
+ lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code
+
+sys_merge_sys_corr:
+ ldah r14, 0xfff0(r31)
+ mtpr r0, pt0 // save r0 for scratch
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r1, pt1 // save r0 for scratch
+
+ ldqp r0, ei_addr(r14) // EI_ADDR IPR
+ ldqp r10, fill_syn(r14) // FILL_SYN IPR
+ bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub
+
+ blbs r12, 1f // no scrubbing for IRQ0 case
+// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1
+ bsr r13, sys_crd_scrub_mem // and go scrub
+
+ // ld/st pair in scrub routine will have finished due
+ // to ibox stall of stx_c. Don't need another mb.
+ ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ or r8, r31, r12 // Must only be executed once in this flow, and must
+ br r31, 2f // be after the scrub routine.
+
+1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ // For IRQ0 CRD case only - meaningless data.
+
+2: mfpr r13, pt_mces // Get MCES
+ srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES
+ blbc r14, 6f // branch if 630
+ srl r13, mces_v_dsc, r14 // check if 620 reporting disabled
+ blbc r14, 5f // branch if enabled
+ or r13, r31, r14 // don't set SCE if disabled
+ br r31, 8f // continue
+5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit
+ br r31, 8f
+
+6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled
+ blbc r14, 7f // branch if enabled
+ or r13, r31, r14 // don't set PCE if disabled
+ br r31, 8f // continue
+7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit
+
+ // Setup SCB if dpc is not set
+8: mtpr r14, pt_mces // Store updated MCES
+ srl r13, mces_v_sce, r1 // Get SCE
+ srl r13, mces_v_pce, r14 // Get PCE
+ or r1, r14, r1 // SCE OR PCE, since they share
+ // the CRD logout frame
+ // Get base of the logout area.
+ GET_IMPURE(r14) // addr of per-cpu impure area
+ GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)
+
+ blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame
+
+ // Set the 2nd error flag in the logout area:
+
+ lda r1, 3(r31) // Set retry and 2nd error flags
+ sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword
+ stlp r1, mchk_crd_flag+4(r14) // store flag longword
+ br sys_crd_ack
+
+sys_crd_write_logout_frame:
+ // should only be here if neither the pce or sce bits are set
+
+ //+
+ // Write the mchk code to the logout area
+ //-
+ stqp r9, mchk_crd_mchk_code(r14)
+
+
+ //+
+ // Write the first 2 quadwords of the logout area:
+ //-
+ lda r1, 1(r31) // Set retry flag
+ sll r1, 63, r9 // Move retry flag to bit 63
+ lda r1, mchk_crd_size(r9) // Combine retry flag and frame size
+ stqp r1, mchk_crd_flag(r14) // store flag/frame size
+
+#ifndef SIMOS
+ /* needed? bugnion */
+ lda r1, mchk_crd_sys_base(r31) // sys offset
+ sll r1, 32, r1
+ lda r1, mchk_crd_cpu_base(r1) // cpu offset
+ stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame
+
+#endif
+ //+
+ // Write error IPRs already fetched to the logout area
+ //-
+ stqp r0, mchk_crd_ei_addr(r14)
+ stqp r10, mchk_crd_fill_syn(r14)
+ stqp r8, mchk_crd_ei_stat(r14)
+ stqp r25, mchk_crd_isr(r14)
+ //+
+ // Log system specific info here
+ //-
+crd_storeTLEP_:
+ lda r1, 0xffc4(r31) // Get GBUS$MISCR address
+ sll r1, 24, r1
+ ldqp r1, 0(r1) // Read GBUS$MISCR
+ sll r1, 16, r1 // shift up to proper field
+ mfpr r10, pt_whami // get our node id
+ extbl r10, 1, r10 // shift to bit 0
+ or r1, r10, r1 // merge MISCR and WHAMI
+ stlp r1, mchk_crd_whami(r14) // write to crd logout area
+ srl r10, 1, r10 // shift off cpu number
+
+ Get_TLSB_Node_Address(r10,r0) // compute our nodespace address
+
+ OSFcrd_TLEPstore_tlsb(tldev)
+ OSFcrd_TLEPstore_tlsb_clr(tlber)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr0)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr1)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr2)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr3)
+
+sys_crd_ack:
+ mfpr r0, pt0 // restore r0
+ mfpr r1, pt1 // restore r1
+
+ srl r12, ei_stat_v_ei_es, r12
+ blbc r12, 5f
+ srl r13, mces_v_dsc, r10 // logging enabled?
+ br r31, 6f
+5: srl r13, mces_v_dpc, r10 // logging enabled?
+6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it
+
+ // logging not enabled --
+ // Get base of the logout area.
+ GET_IMPURE(r13) // addr of per-cpu impure area
+ GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
+ ldlp r10, mchk_crd_rsvd(r13) // bump counter
+ addl r10, 1, r10
+ stlp r10, mchk_crd_rsvd(r13)
+ mb
+ br r31, sys_crd_dismiss_interrupt // just return
+
+ //+
+ // The stack is pushed. Load up a0,a1,a2 and vector via entInt
+ //
+ //-
+
+ ALIGN_BRANCH
+sys_crd_post_interrupt:
+ lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
+ lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector
+
+ blbc r12, 1f
+ lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector
+
+1: subq r31, 1, r18 // get a -1
+ mfpr r25, pt_entInt
+
+ srl r18, 42, r18 // shift off low bits of kseg addr
+ mtpr r25, exc_addr // load interrupt vector
+
+ sll r18, 42, r18 // shift back into position
+ or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+
+ hw_rei_spe // done
+
+
+ //+
+ // The stack is pushed. Need to back out of it all.
+ //-
+
+sys_crd_dismiss_interrupt:
+ br r31, Call_Pal_Rti
+
+
+// .sbttl sys_crd_scrub_mem
+
+ //+
+ //
+ // sys_crd_scrub_mem
+ // called
+ // jsr r13, sys$crd_scrub_mem
+ // r0 = addr of cache block
+ //
+ //-
+
+
+
+ ALIGN_BLOCK // align for branch target
+sys_crd_scrub_mem:
+ // now find error in memory, and attempt to scrub that cache block
+ // This routine just scrubs the failing octaword
+ // Only need to "touch" one quadword per octaword to accomplish the scrub
+ srl r0, 39, r8 // get high bit of bad pa
+ blbs r8, 1f // don't attempt fixup on IO space addrs
+ nop // needed to align the ldqpl to octaword boundary
+ nop // "
+
+ ldqpl r8, 0(r0) // attempt to read the bad memory
+ // location
+ // (Note bits 63:40,3:0 of ei_addr
+ // are set to 1, but as long as
+ // we are doing a phys ref, should
+ // be ok)
+ nop // Needed to keep the Ibox from swapping the ldqpl into E1
+
+ stqpc r8, 0(r0) // Store it back if it is still there.
+ // If store fails, location already
+ // scrubbed by someone else
+
+ nop // needed to align the ldqpl to octaword boundary
+
+ lda r8, 0x20(r31) // flip bit 5 to touch next hexaword
+ xor r8, r0, r0
+ nop // needed to align the ldqpl to octaword boundary
+ nop // "
+
+ ldqpl r8, 0(r0) // attempt to read the bad memory
+ // location
+ // (Note bits 63:40,3:0 of ei_addr
+ // are set to 1, but as long as
+ // we are doing a phys ref, should
+ // be ok)
+ nop // Needed to keep the Ibox from swapping the ldqpl into E1
+
+ stqpc r8, 0(r0) // Store it back if it is still there.
+ // If store fails, location already
+ // scrubbed by someone else
+
+ lda r8, 0x20(r31) // restore r0 to original address
+ xor r8, r0, r0
+
+ //at this point, ei_stat could be locked due to a new corr error on the ld,
+ //so read ei_stat to unlock AFTER this routine.
+
+// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1
+1: ret r31, (r13) // and back we go
+
+
+// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
+//+
+// Machine check interrupt from the system. Setup and join the
+// regular machine check flow.
+// On exit:
+// pt0 - saved r0
+// pt1 - saved r1
+// pt4 - saved r4
+// pt5 - saved r5
+// pt6 - saved r6
+// pt10 - saved exc_addr
+// pt_misc<47:32> - mchk code
+// pt_misc<31:16> - scb vector
+// r14 - base of Cbox IPRs in IO space
+// MCES<mchk> is set
+//-
+ ALIGN_BLOCK
+sys_int_mchk:
+ lda r14, mchk_c_sys_hrd_error(r31)
+ mfpr r12, exc_addr
+
+ addq r14, 1, r14 // Flag as interrupt
+ nop
+
+ sll r14, 32, r14 // Move mchk code to position
+ mtpr r12, pt10 // Stash exc_addr
+
+ mfpr r12, pt_misc // Get MCES and scratch
+ mtpr r0, pt0 // Stash for scratch
+
+ zap r12, 0x3c, r12 // Clear scratch
+ blbs r12, sys_double_machine_check // MCHK halt if double machine check
+
+ or r12, r14, r12 // Combine mchk code
+ lda r14, scb_v_sysmchk(r31) // Get SCB vector
+
+ sll r14, 16, r14 // Move SCBv to position
+ or r12, r14, r14 // Combine SCBv
+
+ bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
+ mtpr r14, pt_misc // Save mchk code!scbv!whami!mces
+
+ ldah r14, 0xfff0(r31)
+ mtpr r1, pt1 // Stash for scratch
+
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r4, pt4
+
+ mtpr r5, pt5
+
+#if beh_model
+// .if ne beh_model
+ ldah r25, 0xC000(r31) // Get base of demon space
+ lda r25, 0x340(r25) // Add interrupt demon offset
+
+ ldqp r13, 0(r25) // Read the control register
+ nop
+
+ and r13, 0x10, r8 // For debug, check that the interrupt is expected
+ beq r8, interrupt_not_expected
+
+ bic r13, 0x10, r13
+ stqp r13, 0(r25) // Ack and clear the interrupt
+// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow
+ .endc
+#endif
+
+ mtpr r6, pt6
+ br r31, sys_mchk_collect_iprs // Join common machine check flow
+
+
+// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code"
+//+
+//sys$int_perf_cnt
+//
+// A performance counter interrupt has been detected. The stack has been pushed.
+// IPL and PS are updated as well.
+//
+// on exit to interrupt entry point ENTINT::
+// a0 = osfint$c_perf
+// a1 = scb$v_perfmon (650)
+// a2 = 0 if performance counter 0 fired
+// a2 = 1 if performance counter 1 fired
+// a2 = 2 if performance counter 2 fired
+// (if more than one counter overflowed, an interrupt will be
+// generated for each counter that overflows)
+//
+//
+//-
+ ALIGN_BLOCK
+sys_int_perf_cnt: // Performance counter interrupt
+ lda r17, scb_v_perfmon(r31) // a1 to interrupt vector
+ mfpr r25, pt_entint
+
+ lda r16, osfint_c_perf(r31) // a0 to perf counter code
+ mtpr r25, exc_addr
+
+ //isolate which perf ctr fired, load code in a2, and ack
+ mfpr r25, isr
+ or r31, r31, r18 // assume interrupt was pc0
+
+ srl r25, isr_v_pc1, r25 // isolate
+ cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14
+
+ srl r25, 1, r25 // get pc2
+ cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14
+
+ lda r25, 1(r31) // get a one
+ sll r25, r18, r25
+
+ sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt
+ mtpr r25, hwint_clr
+
+ hw_rei_spe
+
+
+
+ ALIGN_BLOCK
+// .sbttl "System specific RESET code"
+//+
+// RESET code
+// On entry:
+// r1 = pal_base +8
+//
+// Entry state on trap:
+// r0 = whami
+// r2 = base of scratch area
+// r3 = halt code
+// and the following 3 if init_cbox is enabled:
+// r5 = sc_ctl
+// r6 = bc_ctl
+// r7 = bc_cnfg
+//
+// Entry state on switch:
+// r17 - new PC
+// r18 - new PCBB
+// r19 - new VPTB
+//
+//-
+
+#if rax_mode==0
+ .globl sys_reset
+sys_reset:
+// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load
+ mtpr r31, itb_ia // clear the ITB
+ mtpr r31, dtb_ia // clear the DTB
+
+ lda r1, -8(r1) // point to start of code
+ mtpr r1, pal_base // initialize PAL_BASE
+
+ // Interrupts
+ mtpr r31, astrr // stop ASTs
+ mtpr r31, aster // stop ASTs
+ mtpr r31, sirr // clear software interrupts
+
+ mtpr r0, pt1 // r0 is whami (unless we entered via swp)
+
+//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
+ ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
+
+#if disable_crd == 0
+// .if eq disable_crd
+ bis r31, 1, r0
+ sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable>
+ or r0, r1, r1 // Set the bit
+#endif
+
+ mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable,
+ // super page enabled, correct read per assembly option
+
+ // Mbox/Dcache init
+//orig lda r1, <1@<mcsr$v_sp1>>(r31)
+ lda r1,BIT(mcsr_v_sp1)(zero)
+
+ mtpr r1, mcsr // MCSR - Super page enabled
+ lda r1, BIT(dc_mode_v_dc_ena)(r31)
+ ALIGN_BRANCH
+// mtpr r1, dc_mode // turn Dcache on
+ nop
+
+ mfpr r31, pt0 // No Mbox instr in 1,2,3,4
+ mfpr r31, pt0
+ mfpr r31, pt0
+ mfpr r31, pt0
+ mtpr r31, dc_flush // flush Dcache
+
+ // build PS (IPL=7,CM=K,VMM=0,SW=0)
+ lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7
+ lda r1, 0x1F(r31)
+ mtpr r1, ipl // set internal <ipl>=1F
+ mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy
+ mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy
+
+ // Create the PALtemp pt_intmask -
+ // MAP:
+ // OSF IPL EV5 internal IPL(hex) note
+ // 0 0
+ // 1 1
+ // 2 2
+ // 3 14 device
+ // 4 15 device
+ // 5 16 device
+ // 6 1E device,performance counter, powerfail
+ // 7 1F
+ //
+
+ ldah r1, 0x1f1E(r31) // Create upper lw of int_mask
+ lda r1, 0x1615(r1)
+
+ sll r1, 32, r1
+ ldah r1, 0x1402(r1) // Create lower lw of int_mask
+
+ lda r1, 0x0100(r1)
+ mtpr r1, pt_intmask // Stash in PALtemp
+
+ // Unlock a bunch of chip internal IPRs
+ mtpr r31, exc_sum // clear out exeception summary and exc_mask
+ mfpr r31, va // unlock va, mmstat
+//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
+ lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
+
+ mtpr r8, icperr_stat // Clear Icache parity error & timeout status
+//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
+ lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
+
+ mtpr r8, dcperr_stat // Clear Dcache parity error status
+
+ rc r0 // clear intr_flag
+ mtpr r31, pt_trap
+
+ mfpr r0, pt_misc
+ srl r0, pt_misc_v_switch, r1
+ blbs r1, sys_reset_switch // see if we got here from swppal
+
+ // Rest of the "real" reset flow
+ // ASN
+ mtpr r31, dtb_asn
+ mtpr r31, itb_asn
+
+ lda r1, 0x67(r31)
+ sll r1, hwint_clr_v_pc0c, r1
+ mtpr r1, hwint_clr // Clear hardware interrupt requests
+
+ lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
+ mfpr r0, pt1 // get whami
+ insbl r0, 1, r0 // isolate whami in correct pt_misc position
+ or r0, r1, r1 // combine whami and mces
+ mtpr r1, pt_misc // store whami and mces, swap bit clear
+
+ zapnot r3, 1, r0 // isolate halt code
+ mtpr r0, pt0 // save entry type
+
+ // Cycle counter
+ or r31, 1, r9 // get a one
+ sll r9, 32, r9 // shift to <32>
+ mtpr r31, cc // clear Cycle Counter
+ mtpr r9, cc_ctl // clear and enable the Cycle Counter
+ mtpr r31, pt_scc // clear System Cycle Counter
+
+
+ // Misc PALtemps
+ mtpr r31, maf_mode // no mbox instructions for 3 cycles
+ or r31, 1, r1 // get bogus scbb value
+ mtpr r1, pt_scbb // load scbb
+ mtpr r31, pt_prbr // clear out prbr
+#ifdef SIMOS
+ // yes, this is ugly, but you figure out a better
+ // way to get the address of the kludge_initial_pcbb
+ // in r1 with an uncooperative assembler --ali
+ br r1, kludge_getpcb_addr
+ br r31, kludge_initial_pcbb
+kludge_getpcb_addr:
+ ldqp r19, 0(r1)
+ sll r19, 44, r19
+ srl r19, 44, r19
+ mulq r19,4,r19
+ addq r19, r1, r1
+ addq r1,4,r1
+// or zero,kludge_initial_pcbb,r1
+// GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
+#else
+ mfpr r1, pal_base
+//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
+ GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
+#endif
+ mtpr r1, pt_pcbb // load pcbb
+ lda r1, 2(r31) // get a two
+ sll r1, 32, r1 // gen up upper bits
+ mtpr r1, mvptbr
+ mtpr r1, ivptbr
+ mtpr r31, pt_ptbr
+ // Performance counters
+ mtpr r31, pmctr
+
+#if init_cbox != 0
+// .if ne init_cbox
+ // Only init the Scache and the Bcache if there have been no previous
+ // cacheable dstream loads or stores.
+ //
+ // Inputs:
+ // r5 - sc_ctl
+ // r6 - bc_ctl
+ // r7 - bc_cnfg
+
+ ldah r0, 0xfff0(r31)
+ zap r0, 0xE0, r0 // Get Cbox IPR base
+ ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
+temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
+ lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
+ sll r20, 1, r20
+temp = 0x017441 // default bc_config
+ get_addr r21, temp, r31 // create default bc_config
+ lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
+
+// XXX bugnion pvc$jsr scbcctl, bsr=1
+ bsr r10, set_sc_bc_ctl
+ update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
+ store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area
+// .endc
+#endif
+ // Clear pmctr_ctl in impure area
+
+#ifndef SIMOS
+ // can't assemble ???
+ update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed
+#endif
+
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+#ifndef SIMOS
+ ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr
+ ldqp r31, ei_stat(r14)
+ ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
+#endif
+ GET_IMPURE(r13)
+ stqpc r31, 0(r13) // Clear lock_flag
+
+ mfpr r0, pt0 // get entry type
+ br r31, sys_enter_console // enter the cosole
+
+#endif /* rax_mode == 0 */
+
+
+
+
+//.if ne rax_mode
+#if rax_mode != 0
+
+ // For RAX:
+ // r0 - icsr at first, then used for cbox ipr base offset
+ // r2 - mcsr
+ // r3 - dc_mode
+ // r4 - maf_mode
+ // r5 - sc_ctl
+ // r6 - bc_ctl
+ // r7 - bc_cnfg
+ .globl sys_reset
+sys_reset:
+ mtpr r31, ev5__dtb_cm // set mbox mode to kernel
+ mtpr r31, ev5__ps // set Ibox mode to kernel - E1
+
+ mtpr r0, ev5__icsr // Load ICSR - E1
+
+ mtpr r2, ev5__mcsr
+ mfpr r8, pal_base
+
+ ldah r0, 0xfff0(r31)
+ zap r0, 0xE0, r0 // Get Cbox IPR base
+
+ mtpr r31, ev5__itb_asn // clear asn - E1
+ ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
+
+temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
+ lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
+ sll r20, 1, r20
+
+temp = 0x017441 // default bc_config
+ get_addr r21, temp, r31 // create default bc_config
+ lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
+
+// XXX bugnion pvc$jsr scbcctl, bsr=1
+ bsr r10, set_sc_bc_ctl
+ update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2
+ store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl
+ store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow
+
+ mtpr r3, ev5__dc_mode // write dc_mode
+ mtpr r31, ev5__dc_flush // flush dcache
+
+ mtpr r31, ev5__exc_sum // clear exc_sum - E1
+ mtpr r31, ev5__exc_mask // clear exc_mask - E1
+
+ ldah r2, 4(r31) // For EXC_ADDR
+ mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex)
+
+ mtpr r31, ev5__sirr // Clear SW interrupts (for ISP)
+ mtpr r4, ev5__maf_mode // write maf_mode
+
+ mtpr r31, ev5__alt_mode // set alt_mode to kernel
+ mtpr r31, ev5__itb_ia // clear ITB - E1
+
+ lda r1, 0x1F(r31) // For IPL
+ mtpr r1, ev5__ipl // IPL to 1F
+
+ mtpr r31, ev5__hwint_clr // clear hardware interrupts
+ mtpr r31, ev5__aster // disable AST interrupts
+
+ mtpr r31, ev5__astrr // clear AST requests
+ mtpr r31, ev5__dtb_ia // clear dtb
+
+ nop
+ mtpr r31, pt_trap
+
+ srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000
+ sll r9, 32, r9
+
+ lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set
+ nop
+
+ mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000
+ mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000
+
+ mtpr r2, dtb_tag
+ mtpr r9, itb_pte
+
+ and r31, r31, r0 // clear deposited registers, note: r2 already overwritten
+ and r31, r31, r3
+
+ and r31, r31, r4
+ and r31, r31, r5
+
+ and r31, r31, r6
+ and r31, r31, r7
+
+ hw_rei //May need to be a rei_stall since
+ //we write to TB's above
+ //However, it currently works ok. (JH)
+
+
+// .endc
+#endif /*rax_mode != 0 */
+
+
+ // swppal entry
+ // r0 - pt_misc
+ // r17 - new PC
+ // r18 - new PCBB
+ // r19 - new VPTB
+sys_reset_switch:
+ or r31, 1, r9
+ sll r9, pt_misc_v_switch, r9
+ bic r0, r9, r0 // clear switch bit
+ mtpr r0, pt_misc
+
+ rpcc r1 // get cyccounter
+
+ ldqp r22, osfpcb_q_fen(r18) // get new fen/pme
+ ldlp r23, osfpcb_l_cc(r18) // get cycle counter
+ ldlp r24, osfpcb_l_asn(r18) // get new asn
+
+
+ ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr
+ sll r25, page_offset_size_bits, r25 // convert pfn to pa
+ mtpr r25, pt_ptbr // load the new mmptr
+ mtpr r18, pt_pcbb // set new pcbb
+
+ bic r17, 3, r17 // clean use pc
+ mtpr r17, exc_addr // set new pc
+ mtpr r19, mvptbr
+ mtpr r19, ivptbr
+
+ ldqp r30, osfpcb_q_Usp(r18) // get new usp
+ mtpr r30, pt_usp // save usp
+
+ sll r24, dtb_asn_v_asn, r8
+ mtpr r8, dtb_asn
+ sll r24, itb_asn_v_asn, r24
+ mtpr r24, itb_asn
+
+ mfpr r25, icsr // get current icsr
+ lda r24, 1(r31)
+ sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position
+ bic r25, r24, r25 // clean out old fpe
+ and r22, 1, r22 // isolate new fen bit
+ sll r22, icsr_v_fpe, r22
+ or r22, r25, r25 // or in new fpe
+ mtpr r25, icsr // update ibox ipr
+
+ subl r23, r1, r1 // gen new cc offset
+ insll r1, 4, r1 // << 32
+ mtpr r1, cc // set new offset
+
+ or r31, r31, r0 // set success
+ ldqp r30, osfpcb_q_Ksp(r18) // get new ksp
+ mfpr r31, pt0 // stall
+ hw_rei_stall
+
+// .sbttl "SYS_MACHINE_CHECK - Machine check PAL"
+ ALIGN_BLOCK
+//+
+//sys$machine_check
+// A machine_check trap has occurred. The Icache has been flushed.
+//
+//-
+
+EXPORT(sys_machine_check)
+ // Need to fill up the refill buffer (32 instructions) and
+ // then flush the Icache again.
+ // Also, due to possible 2nd Cbox register file write for
+ // uncorrectable errors, no register file read or write for 7 cycles.
+
+ nop
+ mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later
+
+ nop
+ nop
+
+ nop
+ nop
+
+ nop
+ nop
+
+ nop
+ nop
+ // 10 instructions// 5 cycles
+
+ nop
+ nop
+
+ nop
+ nop
+
+ // Register file can now be written
+ lda r0, scb_v_procmchk(r31) // SCB vector
+ mfpr r13, pt_mces // Get MCES
+ sll r0, 16, r0 // Move SCBv to correct position
+// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit
+ bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
+
+
+ zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word
+ mtpr r14, pt_mces
+ // 20 instructions
+
+ nop
+ or r14, r0, r14 // Insert new SCB vector
+ lda r0, mchk_c_proc_hrd_error(r31) // MCHK code
+ mfpr r12, exc_addr
+
+ sll r0, 32, r0 // Move MCHK code to correct position
+ mtpr r4, pt4
+ or r14, r0, r14 // Insert new MCHK code
+ mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv
+
+ ldah r14, 0xfff0(r31)
+ mtpr r1, pt1 // Stash for scratch - 30 instructions
+
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r12, pt10 // Stash exc_addr
+
+
+
+ mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed.
+ blbs r13, sys_double_machine_check // MCHK halt if double machine check
+
+ mtpr r6, pt6
+ mtpr r5, pt5
+
+ // Look for the powerfail cases here....
+ mfpr r4, isr
+ srl r4, isr_v_pfl, r4
+ blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending
+ lda r4, 0xffc4(r31) // get GBUS$MISCR address bits
+ sll r4, 24, r4 // shift to proper position
+ ldqp r4, 0(r4) // read GBUS$MISCR
+ srl r4, 5, r4 // isolate bit <5>
+ blbc r4, sys_mchk_collect_iprs // skip if already cleared
+ // No missed CFAIL mchk
+ lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits
+ sll r5, 24, r5 // shift to proper position
+ lda r6, 0x40(r31) // get bit <6> mask
+ ldqp r4, 0(r5) // read GBUS$SERNUM
+ or r4, r6, r6 // set bit <6>
+ stqp r6, 0(r5) // clear GBUS$SERNUM<6>
+ mb
+ mb
+
+
+ //+
+ // Start to collect the IPRs. Common entry point for mchk flows.
+ //
+ // Current state:
+ // pt0 - saved r0
+ // pt1 - saved r1
+ // pt4 - saved r4
+ // pt5 - saved r5
+ // pt6 - saved r6
+ // pt10 - saved exc_addr
+ // pt_misc<47:32> - mchk code
+ // pt_misc<31:16> - scb vector
+ // r14 - base of Cbox IPRs in IO space
+ // r0, r1, r4, r5, r6, r12, r13, r25 - available
+ // r8, r9, r10 - available as all loads are physical
+ // MCES<mchk> is set
+ //
+ //-
+
+EXPORT(sys_mchk_collect_iprs)
+ mb // MB before reading Scache IPRs
+ mfpr r1, icperr_stat
+
+ mfpr r8, dcperr_stat
+ mtpr r31, dc_flush // Flush the Dcache
+
+ mfpr r31, pt0 // Pad Mbox instructions from dc_flush
+ mfpr r31, pt0
+ nop
+ nop
+
+ ldqp r9, sc_addr(r14) // SC_ADDR IPR
+ bis r9, r31, r31 // Touch ld to make sure it completes before
+ // read of SC_STAT
+ ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR
+
+ ldqp r12, ei_addr(r14) // EI_ADDR IPR
+ ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR
+ ldqp r0, fill_syn(r14) // FILL_SYN IPR
+ bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT
+ bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT
+ ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ ldqp r31, ei_stat(r14) // Read again to insure it is unlocked
+
+
+
+
+ //+
+ // Look for nonretryable cases
+ // In this segment:
+ // r5<0> = 1 means retryable
+ // r4, r6, and r14 are available for scratch
+ //
+ //-
+
+
+ bis r31, r31, r5 // Clear local retryable flag
+ srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits
+
+ lda r4, 1(r31)
+ sll r4, icperr_stat_v_tmr, r4
+ and r1, r4, r4 // Timeout reset
+ bne r4, sys_cpu_mchk_not_retryable
+
+ and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked
+ bne r4, sys_cpu_mchk_not_retryable
+
+ lda r4, 1(r31)
+ sll r4, sc_stat_v_sc_scnd_err, r4
+ and r10, r4, r4 // 2nd Scache error occurred
+ bne r4, sys_cpu_mchk_not_retryable
+
+
+ bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control
+ // Parity Error, Interface Parity Error, 2nd Error
+
+ and r25, r4, r4
+ bne r4, sys_cpu_mchk_not_retryable
+
+// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
+ bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
+ and r25, r4, r4 // Isolate the Uncorrectable Error Bit
+// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
+ bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
+ cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error
+ bne r4, sys_cpu_mchk_not_retryable
+
+ lda r4, 7(r31)
+ and r10, r4, r4 // Isolate the Scache Tag Parity Error bits
+ bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable
+
+
+ lda r4, 0x7f8(r31)
+ and r10, r4, r4 // Isolate the Scache Data Parity Error bits
+ srl r10, sc_stat_v_cbox_cmd, r6
+ and r6, 0x1f, r6 // Isolate Scache Command field
+ subq r6, 1, r6 // Scache Iread command = 1
+ cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error
+ bne r4, sys_cpu_mchk_not_retryable
+
+ // Look for the system unretryable cases here....
+
+ mfpr r4, isr // mchk_interrupt pin asserted
+ srl r4, isr_v_mck, r4
+ blbs r4, sys_cpu_mchk_not_retryable
+
+
+
+ //+
+ // Look for retryable cases
+ // In this segment:
+ // r5<0> = 1 means retryable
+ // r6 - holds the mchk code
+ // r4 and r14 are available for scratch
+ //
+ //-
+
+
+ // Within the chip, the retryable cases are Istream errors
+ lda r4, 3(r31)
+ sll r4, icperr_stat_v_dpe, r4
+ and r1, r4, r4
+ cmovne r4, 1, r5 // Retryable if just Icache parity error
+
+
+ lda r4, 0x7f8(r31)
+ and r10, r4, r4 // Isolate the Scache Data Parity Error bits
+ srl r10, sc_stat_v_cbox_cmd, r14
+ and r14, 0x1f, r14 // Isolate Scache Command field
+ subq r14, 1, r14 // Scache Iread command = 1
+ cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set
+ cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread
+ bis r4, r5, r5 // Accumulate
+
+
+ bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
+ and r25, r4, r4 // Isolate the Uncorrectable Error Bit
+ and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
+ cmovne r4, 1, r4 // r4 = 1 if uncorr error
+ cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread
+ bis r4, r5, r5 // Accumulate
+
+ mfpr r6, pt_misc
+ extwl r6, 4, r6 // Fetch mchk code
+ bic r6, 1, r6 // Clear flag from interrupt flow
+ cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code
+
+
+
+ // In the system, the retryable cases are ...
+ // (code here handles beh model read NXM)
+
+#if beh_model != 0
+// .if ne beh_model
+ ldah r4, 0xC000(r31) // Get base of demon space
+ lda r4, 0x550(r4) // Add NXM demon flag offset
+
+ ldqp r4, 0(r4) // Read the demon register
+ lda r14, mchk_c_read_nxm(r31)
+ cmovlbs r4, r14, r6 // Set mchk code if read NXM
+ cmovlbs r4, 1, r4
+ bis r4, r5, r5 // Accumulate retry bit
+#endif
+
+
+ //+
+ // Write the logout frame
+ //
+ // Current state:
+ // r0 - fill_syn
+ // r1 - icperr_stat
+ // r4 - available
+ // r5<0> - retry flag
+ // r6 - mchk code
+ // r8 - dcperr_stat
+ // r9 - sc_addr
+ // r10 - sc_stat
+ // r12 - ei_addr
+ // r13 - bc_tag_addr
+ // r14 - available
+ // r25 - ei_stat (shifted)
+ // pt0 - saved r0
+ // pt1 - saved r1
+ // pt4 - saved r4
+ // pt5 - saved r5
+ // pt6 - saved r6
+ // pt10 - saved exc_addr
+ //
+ //-
+
+sys_mchk_write_logout_frame:
+ // Get base of the logout area.
+ GET_IMPURE(r14) // addr of per-cpu impure area
+ GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)
+
+ // Write the first 2 quadwords of the logout area:
+
+ sll r5, 63, r5 // Move retry flag to bit 63
+ lda r4, mchk_size(r5) // Combine retry flag and frame size
+ stqp r4, mchk_flag(r14) // store flag/frame size
+ lda r4, mchk_sys_base(r31) // sys offset
+ sll r4, 32, r4
+ lda r4, mchk_cpu_base(r4) // cpu offset
+ stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame
+
+ //+
+ // Write the mchk code to the logout area
+ // Write error IPRs already fetched to the logout area
+ // Restore some GPRs from PALtemps
+ //-
+
+ mfpr r5, pt5
+ stqp r6, mchk_mchk_code(r14)
+ mfpr r4, pt4
+ stqp r1, mchk_ic_perr_stat(r14)
+ mfpr r6, pt6
+ stqp r8, mchk_dc_perr_stat(r14)
+ mfpr r1, pt1
+ stqp r9, mchk_sc_addr(r14)
+ stqp r10, mchk_sc_stat(r14)
+ stqp r12, mchk_ei_addr(r14)
+ stqp r13, mchk_bc_tag_addr(r14)
+ stqp r0, mchk_fill_syn(r14)
+ mfpr r0, pt0
+ sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position
+ // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
+ ldah r13, 0xfff0(r31)
+ zapnot r13, 0x1f, r13
+ ldqp r13, ei_stat(r13)
+ sll r13, 64-ei_stat_v_bc_tperr, r13
+ srl r13, 64-ei_stat_v_bc_tperr, r13
+ or r25, r13, r25
+ stqp r25, mchk_ei_stat(r14)
+
+
+
+
+ //+
+ // complete the CPU-specific part of the logout frame
+ //-
+
+#ifndef SIMOS
+ // cant' assemble.Where is the macro ?
+ mchk_logout mm_stat
+ mchk_logout va // Unlocks VA and MM_STAT
+ mchk_logout isr
+ mchk_logout icsr
+ mchk_logout pal_base
+ mchk_logout exc_mask
+ mchk_logout exc_sum
+#endif
+
+ ldah r13, 0xfff0(r31)
+ zap r13, 0xE0, r13 // Get Cbox IPR base
+ ldqp r13, ld_lock(r13) // Get ld_lock IPR
+ stqp r13, mchk_ld_lock(r14) // and stash it in the frame
+
+ //+
+ // complete the PAL-specific part of the logout frame
+ //-
+#ifdef vms
+ t = 0
+ .repeat 24
+ pt_mchk_logout \t
+ t = t + 1
+ .endr
+#endif
+#ifndef SIMOS
+ //can't assemble ?
+ pt_mchk_logout 0
+ pt_mchk_logout 1
+ pt_mchk_logout 2
+ pt_mchk_logout 3
+ pt_mchk_logout 4
+ pt_mchk_logout 5
+ pt_mchk_logout 6
+ pt_mchk_logout 7
+ pt_mchk_logout 8
+ pt_mchk_logout 9
+ pt_mchk_logout 10
+ pt_mchk_logout 11
+ pt_mchk_logout 12
+ pt_mchk_logout 13
+ pt_mchk_logout 14
+ pt_mchk_logout 15
+ pt_mchk_logout 16
+ pt_mchk_logout 17
+ pt_mchk_logout 18
+ pt_mchk_logout 19
+ pt_mchk_logout 20
+ pt_mchk_logout 21
+ pt_mchk_logout 22
+ pt_mchk_logout 23
+#endif
+
+
+ //+
+ // Log system specific info here
+ //-
+
+#if alpha_fw != 0
+// .if ne alpha_fw
+storeTLEP_:
+ lda r13, 0xffc4(r31) // Get GBUS$MISCR address
+ sll r13, 24, r13
+ ldqp r13, 0(r13) // Read GBUS$MISCR
+ sll r13, 16, r13 // shift up to proper field
+ mfpr r8, pt_whami // get our node id
+ extbl r8, 1, r8 // shift to bit 0
+ or r13, r8, r13 // merge MISCR and WHAMI
+ stlp r13, mchk$gbus(r14) // write to logout area
+ srl r8, 1, r8 // shift off cpu number
+
+ Get_TLSB_Node_Address r8,r13 // compute our nodespace address
+
+ OSFmchk_TLEPstore tldev, tlsb=1
+ OSFmchk_TLEPstore tlber, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlcnr, tlsb=1
+ OSFmchk_TLEPstore tlvid, tlsb=1
+ OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlmodconfig
+ OSFmchk_TLEPstore tlepaerr, clr=1
+ OSFmchk_TLEPstore tlepderr, clr=1
+ OSFmchk_TLEPstore tlepmerr, clr=1
+ OSFmchk_TLEPstore tlintrmask0
+ OSFmchk_TLEPstore tlintrmask1
+ OSFmchk_TLEPstore tlintrsum0
+ OSFmchk_TLEPstore tlintrsum1
+ OSFmchk_TLEPstore tlep_vmg
+// .endc
+#endif /*alpha_fw != 0 */
+ // Unlock IPRs
+ lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
+ mtpr r8, dcperr_stat // Clear Dcache parity error status
+
+ lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
+ mtpr r8, icperr_stat // Clear Icache parity error & timeout status
+
+1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value
+ GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 2f // check next case if nothing set
+ lda r0, mchk_c_retryable_ird(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value
+ GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 3f // check next case if nothing set
+ lda r0, mchk_c_dcperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value
+ GET_ADDR(r0,0x107ff,r31) // get SC_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 4f // check next case if nothing set
+ lda r0, mchk_c_scperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
+ GET_ADDR(r0,0x30000000,r31) // get EI_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 5f // check next case if nothing set
+ lda r0, mchk_c_bcperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+5: ldlp r8, mchk_tlber(r14) // get TLBER value
+ GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value
+ sll r0, 16, r0 // shift into proper position
+ GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value
+ or r0, r1, r0 // merge mask values
+ and r0, r8, r0 // compare
+ beq r0, 6f // check next case if nothing set
+ GET_ADDR(r0, 0xfff0, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
+ GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 7f // check next case if nothing set
+ GET_ADDR(r0, 0xfffa, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value
+ GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 8f // check next case if nothing set
+ GET_ADDR(r0, 0xfffb, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value
+ GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 9f // check next case if nothing set
+ GET_ADDR(r0, 0xfffc, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
+ GET_ADDR(r0,0xb,r31) // get EI_STAT mask value
+ sll r0, 32, r0 // shift to upper lw
+ and r0, r8, r0 // compare
+ beq r0, 1f // check next case if nothing set
+ GET_ADDR(r0,0xfffd,r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
+ GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value
+ and r0, r8, r0 // compare
+ beq r0, cont_logout_frame // check next case if nothing set
+ GET_ADDR(r0, 0xfffe, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+do_670: lda r8, scb_v_procmchk(r31) // SCB vector
+ br r31, do_6x0_cont
+do_660: lda r8, scb_v_sysmchk(r31) // SCB vector
+do_6x0_cont:
+ sll r8, 16, r8 // shift to proper position
+ mfpr r1, pt_misc // fetch current pt_misc
+ GET_ADDR(r4,0xffff, r31) // mask for vector field
+ sll r4, 16, r4 // shift to proper position
+ bic r1, r4, r1 // clear out old vector field
+ or r1, r8, r1 // merge in new vector
+ mtpr r1, pt_misc // save new vector field
+ stlp r0, mchk_mchk_code(r14) // save new mchk code
+
+cont_logout_frame:
+ // Restore some GPRs from PALtemps
+ mfpr r0, pt0
+ mfpr r1, pt1
+ mfpr r4, pt4
+
+ mfpr r12, pt10 // fetch original PC
+ blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal
+
+//XXXbugnion pvc_jsr armc, bsr=1
+ bsr r12, sys_arith_and_mchk // go check for and deal with arith trap
+
+ mtpr r31, exc_sum // Clear Exception Summary
+
+ mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc
+ stqp r25, mchk_exc_addr(r14)
+
+ //+
+ // Set up the km trap
+ //-
+
+
+sys_post_mchk_trap:
+ mfpr r25, pt_misc // Check for flag from mchk interrupt
+ extwl r25, 4, r25
+ blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
+
+ bis r14, r31, r12 // stash pointer to logout area
+ mfpr r14, pt10 // get exc_addr
+
+ sll r11, 63-3, r25 // get mode to msb
+ bge r25, 3f
+
+ mtpr r31, dtb_cm
+ mtpr r31, ev5__ps
+
+ mtpr r30, pt_usp // save user stack
+ mfpr r30, pt_ksp
+
+3:
+ lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r11, osfsf_ps(sp) // save ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entint // get the VA of the interrupt routine
+
+ stq r16, osfsf_a0(sp) // a0
+ lda r16, osfint_c_mchk(r31) // flag as mchk in a0
+
+ stq r17, osfsf_a1(sp) // a1
+ mfpr r17, pt_misc // get vector
+
+ stq r29, osfsf_gp(sp) // old gp
+ mtpr r25, exc_addr //
+
+ or r31, 7, r11 // get new ps (km, high ipl)
+ subq r31, 1, r18 // get a -1
+
+ extwl r17, 2, r17 // a1 <- interrupt vector
+ bis r31, ipl_machine_check, r25
+
+ mtpr r25, ipl // Set internal ipl
+ srl r18, 42, r18 // shift off low bits of kseg addr
+
+ sll r18, 42, r18 // shift back into position
+ mfpr r29, pt_kgp // get the kern r29
+
+ or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+ hw_rei_spe // out to interrupt dispatch routine
+
+
+ //+
+ // The stack is pushed. Load up a0,a1,a2 and vector via entInt
+ //
+ //-
+ ALIGN_BRANCH
+sys_mchk_stack_done:
+ lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
+ lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector
+
+ subq r31, 1, r18 // get a -1
+ mfpr r25, pt_entInt
+
+ srl r18, 42, r18 // shift off low bits of kseg addr
+ mtpr r25, exc_addr // load interrupt vector
+
+ sll r18, 42, r18 // shift back into position
+ or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+
+ hw_rei_spe // done
+
+
+ ALIGN_BRANCH
+sys_cpu_mchk_not_retryable:
+ mfpr r6, pt_misc
+ extwl r6, 4, r6 // Fetch mchk code
+ br r31, sys_mchk_write_logout_frame //
+
+
+
+//+
+//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
+// already set. We will now double machine check halt.
+//
+// pt0 - old R0
+//
+//+
+
+EXPORT(sys_double_machine_check)
+#ifndef SIMOS
+ pvc$jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_dbl_mchk(r31)
+ br r31, sys_enter_console
+
+//+
+//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
+// a PAL PC. We will now machine check halt.
+//
+// pt0 - old R0
+//
+//+
+sys_machine_check_while_in_pal:
+ stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written
+
+#ifndef SIMOS
+ pvc$jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_mchk_from_pal(r31)
+ br r31, sys_enter_console
+
+
+//ARITH and MCHK
+// Check for arithmetic errors and build trap frame,
+// but don't post the trap.
+// on entry:
+// pt10 - exc_addr
+// r12 - return address
+// r14 - logout frame pointer
+// r13 - available
+// r8,r9,r10 - available except across stq's
+// pt0,1,6 - available
+//
+// on exit:
+// pt10 - new exc_addr
+// r17 = exc_mask
+// r16 = exc_sum
+// r14 - logout frame pointer
+//
+ ALIGN_BRANCH
+sys_arith_and_mchk:
+ mfpr r13, ev5__exc_sum
+ srl r13, exc_sum_v_swc, r13
+ bne r13, handle_arith_and_mchk
+
+// XXX bugnion pvc$jsr armc, bsr=1, dest=1
+ ret r31, (r12) // return if no outstanding arithmetic error
+
+handle_arith_and_mchk:
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r14, pt0
+
+ mtpr r1, pt1 // get a scratch reg
+ and r11, osfps_m_mode, r1 // get mode bit
+
+ bis r11, r31, r25 // save ps
+ beq r1, 1f // if zero we are in kern now
+
+ bis r31, r31, r25 // set the new ps
+ mtpr r30, pt_usp // save user stack
+
+ mfpr r30, pt_ksp // get kern stack
+1:
+ mfpr r14, exc_addr // get pc into r14 in case stack writes fault
+
+ lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r1, pt_entArith
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r17, osfsf_a1(sp)
+ mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
+
+ stq r29, osfsf_gp(sp)
+ stq r16, osfsf_a0(sp) // save regs
+
+ bis r13, r31, r16 // move exc_sum to r16
+ stq r18, osfsf_a2(sp)
+
+ stq r11, osfsf_ps(sp) // save ps
+ mfpr r29, pt_kgp // get the kern gp
+
+ mfpr r14, pt0 // restore logout frame pointer from pt0
+ bis r25, r31, r11 // set new ps
+
+ mtpr r1, pt10 // Set new PC
+ mfpr r1, pt1
+
+// XXX bugnion pvc$jsr armc, bsr=1, dest=1
+ ret r31, (r12) // return if no outstanding arithmetic error
+
+
+
+// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"
+
+ ALIGN_BLOCK
+
+// SYS$enter_console
+//
+// Entry:
+// Entered when PAL wants to enter the console.
+// usually as the result of a HALT instruction or button,
+// or catastrophic error.
+//
+// Regs on entry...
+//
+// R0 = halt code
+// pt0 <- r0
+//
+// Function:
+//
+// Save all readable machine state, and "call" the console
+//
+// Returns:
+//
+//
+// Notes:
+//
+// In these routines, once the save state routine has been executed,
+// the remainder of the registers become scratchable, as the only
+// "valid" copy of them is the "saved" copy.
+//
+// Any registers or PTs that are modified before calling the save
+// routine will have there data lost. The code below will save all
+// state, but will loose pt 0,4,5.
+//
+//-
+
+EXPORT(sys_enter_console)
+ mtpr r1, pt4
+ mtpr r3, pt5
+#ifdef SIMOS
+ subq r31, 1, r1
+ sll r1, 42, r1
+ ldah r1, 1(r1)
+#else /* SIMOS */
+ lda r3, pal_enter_console_ptr(r31) //find stored vector
+ ldqp r1, 0(r3)
+#endif /* SIMOS */
+
+#ifdef SIMOS
+ /* taken from scrmax, seems like the obvious thing to do */
+ mtpr r1, exc_addr
+ mfpr r1, pt4
+ mfpr r3, pt5
+ STALL
+ STALL
+ hw_rei_stall
+#else
+ pvc$violate 1007
+ jmp r31, (r1) // off to common routine
+#endif
+
+
+// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
+//+
+// sys$exit_console
+//
+// Entry:
+// Entered when console wants to reenter PAL.
+// usually as the result of a CONTINUE.
+//
+//
+// Regs' on entry...
+//
+//
+// Function:
+//
+// Restore all readable machine state, and return to user code.
+//
+//
+//
+//-
+ ALIGN_BLOCK
+sys_exit_console:
+ //Disable physical mode:
+#if enable_physical_console != 0
+// .if ne enable_physical_console
+ mfpr r25, pt_ptbr
+ bic r25, 1, r25 // clear physical console flag
+ mtpr r25, pt_ptbr
+#endif
+
+ GET_IMPURE(r1)
+
+ // clear lock and intr_flags prior to leaving console
+ rc r31 // clear intr_flag
+ // lock flag cleared by restore_state
+#ifndef SIMOS
+ pvc$jsr rststa, bsr=1
+ bsr r3, pal_restore_state // go restore all state
+ // note, R1 and R3 are NOT restored
+ // by restore_state.
+#endif
+ // TB's have been flushed
+
+ ldqp r3, (cns_gpr+(8*3))(r1) // restore r3
+ ldqp r1, (cns_gpr+8)(r1) // restore r1
+ hw_rei_stall // back to user
+
+#if turbo_pcia_intr_fix != 0
+// .if ne turbo_pcia_intr_fix
+check_pcia_intr:
+ mfpr r14, pt14 // fetch saved PCIA interrupt info
+ beq r14, check_done // don't bother checking if no info
+ mfpr r13, ipl // check the current IPL
+ bic r13, 3, r25 // isolate ipl<5:2>
+ cmpeq r25, 0x14, r25 // is it an I/O interrupt?
+ beq r25, check_done // no, return
+ and r13, 3, r25 // get I/O interrupt index
+ extbl r14, r25, r13 // extract info for this interrupt
+ beq r13, check_done // if no info, return
+
+ // This is an RTI from a PCIA interrupt
+ lda r12, 1(r31) // get initial bit mask
+ sll r12, r25, r25 // shift to select interrupt index
+ zap r14, r25, r14 // clear out info from this interrupt
+ mtpr r14, pt14 // and save it
+
+ and r13, 3, r25 // isolate HPC field
+ subq r25, 1, r25 // subtract 1 to get HPC number
+ srl r13, 2, r13 // generate base register address
+ sll r13, 6, r13 // get slot/hose address bits
+ lda r13, 0x38(r13) // insert other high bits
+ sll r13, 28, r13 // shift high bits into position
+
+ // Read the IPROGx register
+ sll r25, 21, r14 // HPC address bit position
+ or r13, r14, r14 // add in upper bits
+ lda r14, 0x400(r14) // add in lower bits
+ ldqp r14, 0(r14) // read IPROG
+ srl r14, 4, r12 // check the In Progress bit
+ blbc r12, 1f // skip if none in progress
+ and r14, 0xf, r14 // isolate interrupt source
+ lda r12, 1(r31) // make initial mask
+ sll r12, r14, r14 // shift to make new intr source mask
+ br r31, 2f
+ // Write the SMPLIRQx register
+1: or r31, r31, r14 // default interrupt source mask
+2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data
+ bic r12, r14, r12 // clear any interrupts in progres
+//orig lda r14, <0xbffc@-2>(r31) // get register address bits
+ lda r14,(0xbffc>>2)(r31)
+
+ sll r14, 10, r14 // shift into position
+ or r14, r13, r14 // add in upper bits
+ sll r25, 8, r25 // shift HPC number into position
+ or r14, r25, r14 // add in lower bits
+ stqp r12, 0(r14) // write SMPLIRQx register
+ mb
+ ldqp r12, 0(r14) // read it back
+ bis r12, r12, r12 // touch register to insure completion
+
+check_done: // do these now and return
+ lda r25, osfsf_c_size(sp) // get updated sp
+ bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
+ br r31, pcia_check_return
+#endif
+
+
+// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only
+
+ ALIGN_128
+.globl kludge_initial_pcbb
+kludge_initial_pcbb: // PCB is 128 bytes long
+// .repeat 16
+// .quad 0
+// .endr
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+// .sbttl "SET_SC_BC_CTL subroutine"
+//
+// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
+// There must be no outstanding memory references -- istream or dstream -- when
+// these registers are written. EV5 prefetcher is difficult to turn off. So,
+// this routine needs to be exactly 32 instructions long// the final jmp must
+// be in the last octaword of a page (prefetcher doesn't go across page)
+//
+//
+// Register expecations:
+// r0 base address of CBOX iprs
+// r5 value to set sc_ctl to (flush bit is added in)
+// r6 value to set bc_ctl to
+// r7 value to set bc_config to
+// r10 return address
+// r19 old sc_ctl value
+// r20 old value of bc_ctl
+// r21 old value of bc_config
+// r23 flush scache flag
+// Register usage:
+// r17 sc_ctl with flush bit cleared
+// r22 loop address
+//
+//
+#ifndef SIMOS
+ align_page <32*4> // puts start of routine at next page boundary minus 32 longwords.
+#endif
+
+set_sc_bc_ctl:
+
+#ifndef SIMOS
+ br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest
+sc_ctl_loop:
+// XXX bugnion pvc$jsr scloop, dest=1
+ mb
+ mb
+
+ bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23)
+
+ stqp r19, ev5__sc_ctl(r0) // write sc_ctl
+ stqp r20, ev5__bc_ctl(r0) // write bc_ctl
+ bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop
+ stqp r21, bc_config(r0) // write bc_config register
+ bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop
+
+ bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set
+ //NOTE: only works because flush bit is in lower 16 bits
+
+ wmb // don't merge with other writes
+ stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit
+ ldqp r17, ev5__sc_ctl(r0) // read sc_ctl
+ bis r17, r17, r17 // stall until the data comes back
+ bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop
+
+ // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
+ t = 0
+ .repeat 15
+ unop
+ t = t + 1
+ .endr
+ $opdef mnemonic= myjmp, -
+ format= <custom=iregister, iregister, branch_offset>, -
+ encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>
+
+// XXXbugnion pvc$jsr scloop
+ myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
+ // of straight) // r22 gets sc_ctl_done
+ // 2nd time, code continues at sc_ctl_done (I hope)
+sc_ctl_done:
+// XXX bugnion pvc$jsr scloop, dest=1
+// XXX bugnion pvc$jsr scbcctl
+#endif /*SIMOS*/
+ ret r31, (r10) // return to where we came from
+
+
+.end
+
+
+
+
diff --git a/system/alpha/palcode/platform_m5.s b/system/alpha/palcode/platform_m5.s
deleted file mode 100644
index 818cdb53c..000000000
--- a/system/alpha/palcode/platform_m5.s
+++ /dev/null
@@ -1,2726 +0,0 @@
-// build_fixed_image: not sure what means
-// real_mm to be replaced during rewrite
-// remove_save_state remove_restore_state can be remooved to save space ??
-
-
-#define egore 0
-#define acore 0
-#define beh_model 0
-#define ev5_p2 1
-#define ev5_p1 0
-#define ldvpte_bug_fix 1
-#define spe_fix 0
-#define osf_chm_fix 0
-#define build_fixed_image 0
-#define enable_p4_fixups 0
-#define osf_svmin 1
-#define enable_physical_console 0
-#define fill_err_hack 0
-#define icflush_on_tbix 0
-#define max_cpuid 1
-#define perfmon_debug 0
-#define rax_mode 0
-
-#define hw_rei_spe hw_rei
-
-#include "ev5_defs.h"
-#include "ev5_impure.h"
-#include "ev5_alpha_defs.h"
-#include "ev5_paldef.h"
-#include "ev5_osfalpha_defs.h"
-#include "fromHudsonMacros.h"
-#include "fromHudsonOsf.h"
-#include "dc21164FromGasSources.h"
-#include "cserve.h"
-#include "tlaserreg.h"
-//#include "simos.h"
-
-
-#define ldlp ldl_p
-#define ldqp ldq_p
-
-#define stlp stl_p
-#define stqp stq_p
-#define stqpc stqp
-
-#ifdef SIMOS
-#define ldqpl ldq_p
-#define sdqpl sdq_p
-#else
-<--bomb>
-#endif
-
-#define pt_entInt pt_entint
-#define pt_entArith pt_entarith
-#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8)
-#define mchk_flag CNS_Q_FLAG
-#define mchk_sys_base 56
-#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
-#define mchk_offsets CNS_Q_EXC_ADDR
-#define mchk_mchk_code 8
-#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
-#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
-#define mchk_sc_addr CNS_Q_SC_ADDR
-#define mchk_sc_stat CNS_Q_SC_STAT
-#define mchk_ei_addr CNS_Q_EI_ADDR
-#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
-#define mchk_fill_syn CNS_Q_FILL_SYN
-#define mchk_ei_stat CNS_Q_EI_STAT
-#define mchk_exc_addr CNS_Q_EXC_ADDR
-#define mchk_ld_lock CNS_Q_LD_LOCK
-#define osfpcb_q_Ksp pcb_q_ksp
-#define pal_impure_common_size ((0x200 + 7) & 0xfff8)
-
-#define ALIGN_BLOCK \
- .align 5
-
-#define ALIGN_BRANCH \
- .align 3
-
-#define EXPORT(_x) \
- .align 5; \
- .globl _x; \
-_x:
-
-// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
-// XXX the following is 'made up'
-// XXX bugnion
-
-// XXX bugnion not sure how to align 'quad'
-#define ALIGN_QUAD \
- .align 3
-
-#define ALIGN_128 \
- .align 7
-
-
-#define GET_IMPURE(_r) mfpr _r,pt_impure
-#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2)
-
-
-#define BIT(_x) (1<<(_x))
-
-
-// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
-// XXX back to original code
-
-// .sbttl "System specific code - beh model version"
-
-//
-// Entry points
-// SYS$CFLUSH - Cache flush
-// SYS$CSERVE - Console service
-// SYS$WRIPIR - interprocessor interrupts
-// SYS$HALT_INTERRUPT - Halt interrupt
-// SYS$PASSIVE_RELEASE - Interrupt, passive release
-// SYS$INTERRUPT - Interrupt
-// SYS$RESET - Reset
-// SYS$ENTER_CONSOLE
-
-//
-// Macro to read TLINTRSUMx
-//
-// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
-//
-// Assumed register usage:
-// rsum TLINTRSUMx contents
-// raddr node space address
-// scratch scratch register
-
-
-// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2
-//
-// nop
-// mfpr 'scratch', pt_whami // Get our whami (VID)
-//
-// extbl 'scratch', #1, 'scratch' // shift down to bit 0
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// srl 'scratch', #1, 'rsum' // Shift off the cpu number
-//
-// sll 'rsum', #22, 'rsum' // Get our node offset
-// addq 'raddr', 'rsum', 'raddr' // Get our base node space address
-//
-// blbs 'scratch', label1
-// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
-//
-// br r31, label2
-//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
-//
-//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg
-//.endm
-
-#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \
- nop; \
- mfpr _scratch,pt_whami; \
- extbl _scratch,1,_scratch; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- srl _scratch,1,_rsum; \
- sll _rsum,22,_rsum; \
- addq _raddr,_rsum,_raddr; \
- blbs _scratch,1f; \
- lda _raddr,0x1180(_raddr); \
- br r31,2f; \
-1: \
- lda _raddr,0x11c0(_raddr); \
-2: ldlp _rsum,0(_raddr)
-
-
-
-//
-// Macro to write TLINTRSUMx
-//
-// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
-//
-// Assumed register usage:
-// rsum TLINTRSUMx write data
-// raddr node space address
-// scratch scratch register
-
-// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2
-//
-// nop
-// mfpr 'whami', pt_whami // Get our whami (VID)
-//
-// extbl 'whami', #1, 'whami' // shift down to bit 0
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// blbs 'whami', label1
-//
-// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
-// br r31, label2
-//
-// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
-// label2: srl 'whami', #1, 'whami' // Shift off the cpu number
-//
-// sll 'whami', #22, 'whami' // Get our node offset
-// addq 'raddr', 'whami', 'raddr' // Get our base node space address
-//
-// mb
-// stqp 'rsum', 0('raddr') // write the right tlintrsum reg
-// mb
-// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum
-// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo
-// .endm
-
-
-#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \
- nop; \
- mfpr _whami,pt_whami; \
- extbl _whami,1,_whami; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- blbs _whami,1f; \
- lda _raddr,0x1180(_raddr);\
- br zero,2f; \
-1: lda _raddr,0x11c0(_raddr);\
-2: srl _whami,1,_whami; \
- addq _raddr,_whami,_raddr; \
- mb; \
- stqp _rsum,0(_raddr); \
- ldqp _rsum,0(_raddr); \
- bis _rsum,_rsum,_rsum
-
-
-//
-// Macro to determine highest priority TIOP Node ID from interrupt pending mask
-//
-// Assumed register usage:
-// rmask - TLINTRSUMx contents, shifted to isolate IOx bits
-// rid - TLSB Node ID of highest TIOP
-
-//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
-// srl 'rmask', #4, 'rid' // check IOP8
-// blbc 'rid', l1 // not IOP8
-//
-// lda 'rid', 8(r31) // IOP8
-// br r31, l6
-//
-// l1: srl 'rmask', #3, 'rid' // check IOP7
-// blbc 'rid', l2 // not IOP7
-//
-// lda 'rid', 7(r31) // IOP7
-// br r31, l6
-//
-// l2: srl 'rmask', #2, 'rid' // check IOP6
-// blbc 'rid', l3 // not IOP6
-//
-// lda 'rid', 6(r31) // IOP6
-// br r31, l6
-//
-// l3: srl 'rmask', #1, 'rid' // check IOP5
-// blbc 'rid', l4 // not IOP5
-//
-// lda 'rid', 5(r31) // IOP5
-// br r31, l6
-//
-// l4: srl 'rmask', #0, 'rid' // check IOP4
-// blbc 'rid', l5 // not IOP4
-//
-// lda r14, 4(r31) // IOP4
-// br r31, l6
-//
-// l5: lda r14, 0(r31) // passive release
-// l6:
-// .endm
-
-
-#define Intr_Find_TIOP(_rmask,_rid) \
- srl _rmask,3,_rid; \
- blbc _rid,1f; \
- lda _rid,8(zero); \
- br zero,6f; \
-1: srl _rmask,3,_rid; \
- blbc _rid, 2f; \
- lda _rid, 7(r31); \
- br r31, 6f; \
-2: srl _rmask, 2, _rid; \
- blbc _rid, 3f; \
- lda _rid, 6(r31); \
- br r31, 6f; \
-3: srl _rmask, 1, _rid; \
- blbc _rid, 4f; \
- lda _rid, 5(r31); \
- br r31, 6f; \
-4: srl _rmask, 0, _rid; \
- blbc _rid, 5f; \
- lda r14, 4(r31); \
- br r31, 6f; \
-5: lda r14, 0(r31); \
-6:
-
-
-
-
-//
-// Macro to calculate base node space address for given node id
-//
-// Assumed register usage:
-// rid - TLSB node id
-// raddr - base node space address
-
-//.macro Get_TLSB_Node_Address rid, raddr
-// sll 'rid', #22, 'rid' // Get offset of IOP node
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address
-// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id
-//.endm
-
-
-#define turbo_pcia_intr_fix 0
-
-
-#if turbo_pcia_intr_fix != 0
-#define Get_TLSB_Node_Address(_rid,_raddr) \
- sll _rid,22,_rid; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- addq _raddr,_rid,_raddr; \
- srl _rid,22,_rid
-#else
-#define Get_TLSB_Node_Address(_rid,_raddr) \
- sll _rid,22,_rid; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- addq _raddr,_rid,_raddr
-#endif
-
-
-
-
-
-// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
-// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31)
-// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31)
-// or 'rs1', 'nodebase', 'rs1'
-// ldlp 'rs', 0('rs1')
-// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame
-// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame
-// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear
-// .endm
-
-
-// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
-// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
-// .endm
-
-#define CONCAT(_a,_b) _a ## _b
-
-#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog)
-
-
-#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
-
-
-// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
-// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
-// .endm
-
-#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
-
-#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
-
-#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \
- stlp _rs,0(_rs1)
-
-
-#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
-#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
-#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)
-
-
-
-
-// .macro save_pcia_intr irq
-// and r13, #^xf, r25 // isolate low 4 bits
-// addq r14, #4, r14 // format the TIOP Node id field
-// sll r14, #4, r14 // shift the TIOP Node id
-// or r14, r25, r10 // merge Node id/hose/HPC
-// mfpr r14, pt14 // get saved value
-// extbl r14, #'irq', r25 // confirm none outstanding
-// bne r25, sys$machine_check_while_in_pal
-// insbl r10, #'irq', r10 // align new info
-// or r14, r10, r14 // merge info
-// mtpr r14, pt14 // save it
-// bic r13, #^xf, r13 // clear low 4 bits of vector
-// .endm
-
-#define save_pcia_intr(_irq) \
- and r13, 0xf, r25; \
- addq r14, 4, r14; \
- sll r14, 4, r14; \
- or r14, r25, r10; \
- mfpr r14, pt14; \
- extbl r14, _irq, r25; \
- bne r25, sys_machine_check_while_in_pal; \
- insbl r10, _irq, r10; \
- or r14, r10, r14; \
- mtpr r14, pt14; \
- bic r13, 0xf, r13
-
-
-
- ALIGN_BLOCK
-
-// .sbttl "wripir - PALcode for wripir instruction"
-//orig SYS$WRIPIR: // R16 has the processor number.
-
-EXPORT(sys_wripir)
-
-//++
-// Convert the processor number to a CPU mask
-//--
-
- and r16,0x3, r14 // mask the top stuff (4 CPUs supported)
- bis r31,0x1,r16 // get a one
- sll r16,r14,r14 // shift the bit to the right place
- sll r14,12,r14
-
-
-//++
-// Build the Broadcast Space base address
-//--
- lda r16,0xf01(r31)
- sll r16,32,r16
- ldah r13,0xa0(r31)
- sll r13,8,r13
- bis r16,r13,r16
- lda r16,0x0080(r16)
-
-//++
-// Send out the IP Intr
-//--
- stqp r14, 0(r16) // Tsunami MISC Register
- wmb // Push out the store
-
- hw_rei
-
-
- ALIGN_BLOCK
-// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
-//+
-// SYS$CFLUSH
-// Entry:
-//
-// R16 - contains the PFN of the page to be flushed
-//
-// Function:
-// Flush all Dstream caches of 1 entire page
-//
-//-
-
-EXPORT(sys_cflush)
-
-// #convert pfn to addr, and clean off <63:20>
-// #sll r16, <page_offset_size_bits>+<63-20>>, r12
- sll r16, page_offset_size_bits+(63-20),r12
-
-// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
-// # stolen from srcmax code. XXX bugnion
- lda r13, 0x10(r31) // assume 16Mbytes of cache
- sll r13, 20, r13 // convert to bytes
-
-
- srl r12, 63-20, r12 // shift back to normal position
- xor r12, r13, r12 // xor addr<18>
-
- or r31, 8192/(32*8), r13 // get count of loads
- nop
-
-cflush_loop:
- subq r13, 1, r13 // decr counter
- mfpr r25, ev5__intid // Fetch level of interruptor
-
- ldqp r31, 32*0(r12) // do a load
- ldqp r31, 32*1(r12) // do next load
-
- ldqp r31, 32*2(r12) // do next load
- ldqp r31, 32*3(r12) // do next load
-
- ldqp r31, 32*4(r12) // do next load
- ldqp r31, 32*5(r12) // do next load
-
- ldqp r31, 32*6(r12) // do next load
- ldqp r31, 32*7(r12) // do next load
-
- mfpr r14, ev5__ipl // Fetch current level
- lda r12, (32*8)(r12) // skip to next cache block addr
-
- cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl
- beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???
-
- bne r13, cflush_loop // loop till done
- hw_rei // back to user
-
- ALIGN_BRANCH
-1: // Here if interrupted
- mfpr r12, exc_addr
- subq r12, 4, r12 // Backup PC to point to CFLUSH
-
- mtpr r12, exc_addr
- nop
-
- mfpr r31, pt0 // Pad exc_addr write
- hw_rei
-
-
- ALIGN_BLOCK
-// .sbttl "CSERVE- PALcode for CSERVE instruction"
-//+
-// SYS$CSERVE
-//
-// Function:
-// Various functions for private use of console software
-//
-// option selector in r0
-// arguments in r16....
-//
-//
-// r0 = 0 unknown
-//
-// r0 = 1 ldqp
-// r0 = 2 stqp
-// args, are as for normal STQP/LDQP in VMS PAL
-//
-// r0 = 3 dump_tb's
-// r16 = detination PA to dump tb's to.
-//
-// r0<0> = 1, success
-// r0<0> = 0, failure, or option not supported
-// r0<63:1> = (generally 0, but may be function dependent)
-// r0 - load data on ldqp
-//
-//-
-EXPORT(sys_cserve)
-
-#ifdef SIMOS
- /* taken from scrmax */
- cmpeq r18, CSERVE_K_RD_IMPURE, r0
- bne r0, Sys_Cserve_Rd_Impure
-
- cmpeq r18, CSERVE_K_JTOPAL, r0
- bne r0, Sys_Cserve_Jtopal
- call_pal 0
-
- or r31, r31, r0
- hw_rei // and back we go
-
-Sys_Cserve_Rd_Impure:
- mfpr r0, pt_impure // Get base of impure scratch area.
- hw_rei
-
- ALIGN_BRANCH
-
-Sys_Cserve_Jtopal:
- bic a0, 3, t8 // Clear out low 2 bits of address
- bis t8, 1, t8 // Or in PAL mode bit
- mtpr t8,exc_addr
- hw_rei
-
-
-#else /* SIMOS */
-
- cmpeq r16, cserve_ldlp, r12 // check for ldqp
- bne r12, 1f // br if
-
- cmpeq r16, cserve_stlp, r12 // check for stqp
- bne r12, 2f // br if
-
- cmpeq r16, cserve_callback, r12 // check for callback entry
- bne r12, csrv_callback // br if
-
- cmpeq r16, cserve_identify, r12 // check for callback entry
- bne r12, csrv_identify // br if
-
- or r31, r31, r0 // set failure
- nop // pad palshadow write
-
- hw_rei // and back we go
-#endif /* SIMOS */
-
-// ldqp
- ALIGN_QUAD
-1:
- ldqp r0,0(r17) // get the data
- nop // pad palshadow write
-
- hw_rei // and back we go
-
-
-// stqp
- ALIGN_QUAD
-2:
- stqp r18, 0(r17) // store the data
-#ifdef SIMOS
- lda r0,17(r31) // bogus
-#else
- lda r0, CSERVE_SUCCESS(r31) // set success
-#endif
- hw_rei // and back we go
-
-
- ALIGN_QUAD
-csrv_callback:
- ldq r16, 0(r17) // restore r16
- ldq r17, 8(r17) // restore r17
- lda r0, hlt_c_callback(r31)
- br r31, sys_enter_console
-
-
-csrv_identify:
- mfpr r0, pal_base
- ldqp r0, 8(r0)
- hw_rei
-
-
-// dump tb's
- ALIGN_QUAD
-0:
- // DTB PTEs - 64 entries
- addq r31, 64, r0 // initialize loop counter
- nop
-
-1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp
- mfpr r12, ev5__dtb_pte // read out next pte to reg file
-
- subq r0, 1, r0 // decrement loop counter
- nop // Pad - no Mbox instr in cycle after mfpr
-
- stqp r12, 0(r16) // store out PTE
- addq r16, 8 ,r16 // increment pointer
-
- bne r0, 1b
-
- ALIGN_BRANCH
- // ITB PTEs - 48 entries
- addq r31, 48, r0 // initialize loop counter
- nop
-
-2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp
- mfpr r12, ev5__itb_pte // read out next pte to reg file
-
- subq r0, 1, r0 // decrement loop counter
- nop //
-
- stqp r12, 0(r16) // store out PTE
- addq r16, 8 ,r16 // increment pointer
-
- bne r0, 2b
- or r31, 1, r0 // set success
-
- hw_rei // and back we go
-
-
-// .sbttl "SYS$INTERRUPT - Interrupt processing code"
-
-//+
-// SYS$INTERRUPT
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12, r14 - available
-// r13 - INTID (new EV5 IPL)
-// r25 - ISR
-// r16, r17, r18 - available
-//
-//-
-
-
-EXPORT(sys_interrupt)
- cmpeq r13, 31, r12
- bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)
-
- cmpeq r13, 30, r12
- bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail)
-
- cmpeq r13, 29, r12
- bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters)
-
- cmpeq r13, 23, r12
- bne r12, sys_int_23 // Check for level 23 interrupt
- // IPI in Tsunami
-
- cmpeq r13, 22, r12
- bne r12, sys_int_22 // Check for level 22 interrupt
- // timer interrupt
-
- cmpeq r13, 21, r12
- bne r12, sys_int_21 // Check for level 21 interrupt
- // I/O
-
- cmpeq r13, 20, r12
- bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected
- // system error interrupt)
-
- mfpr r14, exc_addr // ooops, something is wrong
- br r31, pal_pal_bug_check_from_int
-
-
-
-
-//+
-//sys$int_2*
-// Routines to handle device interrupts at IPL 23-20.
-// System specific method to ack/clear the interrupt, detect passive release,
-// detect interprocessor (22), interval clock (22), corrected
-// system error (20)
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12, r14 - available
-// r13 - INTID (new EV5 IPL)
-// r25 - ISR
-//
-// On exit:
-// Interrupt has been ack'd/cleared
-// a0/r16 - signals IO device interrupt
-// a1/r17 - contains interrupt vector
-// exit to ent_int address
-//
-//-
- ALIGN_BRANCH
-sys_int_23:
- or r31,0,r16 // IPI interrupt A0 = 0
- lda r12,0xf01(r31) // build up an address for the MISC register
- sll r12,16,r12
- lda r12,0xa000(r12)
- sll r12,16,r12
- lda r12,0x080(r12)
-
- mfpr r10, pt_whami // get CPU ID
- extbl r10, 1, r10 // Isolate just whami bits
- or r31,0x1,r14 // load r14 with bit to clear
- sll r14,r10,r14 // left shift by CPU ID
- sll r14,8,r14
- stq_p r14, 0(r12) // clear the rtc interrupt
-
- br r31, pal_post_interrupt // Notify the OS
-
-
- ALIGN_BRANCH
-sys_int_22:
- or r31,1,r16 // a0 means it is a clock interrupt
- lda r12,0xf01(r31) // build up an address for the MISC register
- sll r12,16,r12
- lda r12,0xa000(r12)
- sll r12,16,r12
- lda r12,0x080(r12)
-
- mfpr r10, pt_whami // get CPU ID
- extbl r10, 1, r10 // Isolate just whami bits
- or r31,0x10,r14 // load r14 with bit to clear
- sll r14,r10,r14 // left shift by CPU ID
- stq_p r14, 0(r12) // clear the rtc interrupt
-
- br r31, pal_post_interrupt // Tell the OS
-
-
- ALIGN_BRANCH
-sys_int_20:
- Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
- srl r13, 12, r13 // shift down to examine IPL15
-
- Intr_Find_TIOP(r13,r14)
- beq r14, 1f
-
- Get_TLSB_Node_Address(r14,r10)
- lda r10, 0xa40(r10) // Get base TLILID address
-
- ldlp r13, 0(r10) // Read the TLILID register
-#if turbo_pcia_intr_fix == 0
-//orig .if eq turbo_pcia_intr_fix
- bne r13, pal_post_dev_interrupt
-//orig .iff
- beq r13, 1f
-
- and r13, 0x3, r10 // check for PCIA bits
- beq r10, pal_post_dev_interrupt // done if nothing set
- save_pcia_intr(1)
- br r31, pal_post_dev_interrupt //
-// orig .endc
-#endif /* turbo_pcia_intr_fix == 0 */
-
-1: lda r16, osfint_c_passrel(r31) // passive release
- br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-sys_int_21:
-
- lda r12,0xf01(r31)
- sll r12,32,r12
- ldah r13,0xa0(r31)
- sll r13,8,r13
- bis r12,r13,r12
- lda r12,0x0080(r12)
- mfpr r13, pt_whami // get CPU ID
- extbl r13, 1, r10 // Isolate just whami bits
-
- and r13,0x1,r14 // grab LSB and shift left 6
- sll r14,6,r14
- and r13,0x2,r10 // grabl LSB+1 and shift left 9
- sll r10,9,r10
-
- mskbl r12,0,r12 // calculate DIRn address
- lda r13,0x280(r31)
- bis r12,r13,r12
- or r12,r14,r12
- or r12,r10,r12
- ldqp r13, 0(r12) // read DIRn
-
- or r31,1,r14 // set bit 55 (ISA Interrupt)
- sll r14,55,r14
-
- and r13, r14, r14 // check if bit 55 is set
- lda r16,0x900(r31) // load offset for normal into r13
- beq r14, normal_int // if not compute the vector normally
-
- lda r16,0x800(r31) // replace with offset for pic
- lda r12,0xf01(r31) // build an addr to access PIC
- sll r12,32,r12 // at f01fc000000
- ldah r13,0xfc(r31)
- sll r13,8,r13
- bis r12,r13,r12
- ldqp r13,0x0020(r12) // read PIC1 ISR for interrupting dev
-
-normal_int:
- //ctlz r13,r14 // count the number of leading zeros
- // EV5 doesn't have ctlz, but we do, so lets use it
- .byte 0x4e
- .byte 0x06
- .byte 0xed
- .byte 0x73
- lda r10,63(r31)
- subq r10,r14,r17 // subtract from
-
- lda r13,0x10(r31)
- mulq r17,r13,r17 // compute 0x900 + (0x10 * Highest DIRn-bit)
- addq r17,r16,r17
-
- or r31,3,r16 // a0 means it is a I/O interrupt
-
- br r31, pal_post_interrupt
-
- ALIGN_BRANCH
-pal_post_dev_interrupt:
- or r13, r31, r17 // move vector to a1
- or r31, osfint_c_dev, r16 // a0 signals IO device interrupt
-
-pal_post_interrupt:
- mfpr r12, pt_entint
-
- mtpr r12, exc_addr
-
- nop
- nop
-
- hw_rei_spe
-
-
-
-//+
-// sys_passive_release
-// Just pretend the interrupt never occurred.
-//-
-
-EXPORT(sys_passive_release)
- mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps
- nop
-
- mfpr r31, pt0 // Pad write to dtb_cm
- hw_rei
-
-//+
-//sys_int_powerfail
-// A powerfail interrupt has been detected. The stack has been pushed.
-// IPL and PS are updated as well.
-//
-// I'm not sure what to do here, I'm treating it as an IO device interrupt
-//
-//-
-
- ALIGN_BLOCK
-sys_int_powerfail:
- lda r12, 0xffc4(r31) // get GBUS_MISCR address bits
- sll r12, 24, r12 // shift to proper position
- ldqp r12, 0(r12) // read GBUS_MISCR
- srl r12, 5, r12 // isolate bit <5>
- blbc r12, 1f // if clear, no missed mchk
-
- // Missed a CFAIL mchk
- lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits
- sll r13, 24, r13 // shift to proper position
- lda r14, 0x40(r31) // get bit <6> mask
- ldqp r12, 0(r13) // read GBUS$SERNUM
- or r12, r14, r14 // set bit <6>
- stqp r14, 0(r13) // clear GBUS$SERNUM<6>
- mb
- mb
-
-1: br r31, sys_int_mchk // do a machine check
-
- lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector
- mfpr r25, pt_entint
-
- lda r16, osfint_c_dev(r31) // a0 to device code
- mtpr r25, exc_addr
-
- nop // pad exc_addr write
- nop
-
- hw_rei_spe
-
-//+
-// sys$halt_interrupt
-// A halt interrupt has been detected. Pass control to the console.
-//
-//
-//-
- EXPORT(sys_halt_interrupt)
-
- ldah r13, 0x1800(r31) // load Halt/^PHalt bits
- Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits
-
- mtpr r11, dtb_cm // Restore Mbox current mode
- nop
- nop
- mtpr r0, pt0
-#ifndef SIMOS
- pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt
- br r31, sys_enter_console // enter the console
-
-
-
-//+
-// sys$int_mchk_or_crd
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12
-// r13 - INTID (new EV5 IPL)
-// r14 - exc_addr
-// r25 - ISR
-// r16, r17, r18 - available
-//
-//-
- ALIGN_BLOCK
-
-sys_int_mchk_or_crd:
- srl r25, isr_v_mck, r12
- blbs r12, sys_int_mchk
- //+
- // Not a Machine check interrupt, so must be an Internal CRD interrupt
- //-
-
- mb //Clear out Cbox prior to reading IPRs
- srl r25, isr_v_crd, r13 //Check for CRD
- blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!!
-
- lda r9, 1(r31)
- sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd
- mtpr r9, ev5__hwint_clr // ack the crd interrupt
-
- or r31, r31, r12 // clear flag
- lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code
-
-sys_merge_sys_corr:
- ldah r14, 0xfff0(r31)
- mtpr r0, pt0 // save r0 for scratch
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r1, pt1 // save r0 for scratch
-
- ldqp r0, ei_addr(r14) // EI_ADDR IPR
- ldqp r10, fill_syn(r14) // FILL_SYN IPR
- bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub
-
- blbs r12, 1f // no scrubbing for IRQ0 case
-// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1
- bsr r13, sys_crd_scrub_mem // and go scrub
-
- // ld/st pair in scrub routine will have finished due
- // to ibox stall of stx_c. Don't need another mb.
- ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- or r8, r31, r12 // Must only be executed once in this flow, and must
- br r31, 2f // be after the scrub routine.
-
-1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- // For IRQ0 CRD case only - meaningless data.
-
-2: mfpr r13, pt_mces // Get MCES
- srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES
- blbc r14, 6f // branch if 630
- srl r13, mces_v_dsc, r14 // check if 620 reporting disabled
- blbc r14, 5f // branch if enabled
- or r13, r31, r14 // don't set SCE if disabled
- br r31, 8f // continue
-5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit
- br r31, 8f
-
-6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled
- blbc r14, 7f // branch if enabled
- or r13, r31, r14 // don't set PCE if disabled
- br r31, 8f // continue
-7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit
-
- // Setup SCB if dpc is not set
-8: mtpr r14, pt_mces // Store updated MCES
- srl r13, mces_v_sce, r1 // Get SCE
- srl r13, mces_v_pce, r14 // Get PCE
- or r1, r14, r1 // SCE OR PCE, since they share
- // the CRD logout frame
- // Get base of the logout area.
- GET_IMPURE(r14) // addr of per-cpu impure area
- GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)
-
- blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame
-
- // Set the 2nd error flag in the logout area:
-
- lda r1, 3(r31) // Set retry and 2nd error flags
- sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword
- stlp r1, mchk_crd_flag+4(r14) // store flag longword
- br sys_crd_ack
-
-sys_crd_write_logout_frame:
- // should only be here if neither the pce or sce bits are set
-
- //+
- // Write the mchk code to the logout area
- //-
- stqp r9, mchk_crd_mchk_code(r14)
-
-
- //+
- // Write the first 2 quadwords of the logout area:
- //-
- lda r1, 1(r31) // Set retry flag
- sll r1, 63, r9 // Move retry flag to bit 63
- lda r1, mchk_crd_size(r9) // Combine retry flag and frame size
- stqp r1, mchk_crd_flag(r14) // store flag/frame size
-
-#ifndef SIMOS
- /* needed? bugnion */
- lda r1, mchk_crd_sys_base(r31) // sys offset
- sll r1, 32, r1
- lda r1, mchk_crd_cpu_base(r1) // cpu offset
- stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame
-
-#endif
- //+
- // Write error IPRs already fetched to the logout area
- //-
- stqp r0, mchk_crd_ei_addr(r14)
- stqp r10, mchk_crd_fill_syn(r14)
- stqp r8, mchk_crd_ei_stat(r14)
- stqp r25, mchk_crd_isr(r14)
- //+
- // Log system specific info here
- //-
-crd_storeTLEP_:
- lda r1, 0xffc4(r31) // Get GBUS$MISCR address
- sll r1, 24, r1
- ldqp r1, 0(r1) // Read GBUS$MISCR
- sll r1, 16, r1 // shift up to proper field
- mfpr r10, pt_whami // get our node id
- extbl r10, 1, r10 // shift to bit 0
- or r1, r10, r1 // merge MISCR and WHAMI
- stlp r1, mchk_crd_whami(r14) // write to crd logout area
- srl r10, 1, r10 // shift off cpu number
-
- Get_TLSB_Node_Address(r10,r0) // compute our nodespace address
-
- OSFcrd_TLEPstore_tlsb(tldev)
- OSFcrd_TLEPstore_tlsb_clr(tlber)
- OSFcrd_TLEPstore_tlsb_clr(tlesr0)
- OSFcrd_TLEPstore_tlsb_clr(tlesr1)
- OSFcrd_TLEPstore_tlsb_clr(tlesr2)
- OSFcrd_TLEPstore_tlsb_clr(tlesr3)
-
-sys_crd_ack:
- mfpr r0, pt0 // restore r0
- mfpr r1, pt1 // restore r1
-
- srl r12, ei_stat_v_ei_es, r12
- blbc r12, 5f
- srl r13, mces_v_dsc, r10 // logging enabled?
- br r31, 6f
-5: srl r13, mces_v_dpc, r10 // logging enabled?
-6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it
-
- // logging not enabled --
- // Get base of the logout area.
- GET_IMPURE(r13) // addr of per-cpu impure area
- GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
- ldlp r10, mchk_crd_rsvd(r13) // bump counter
- addl r10, 1, r10
- stlp r10, mchk_crd_rsvd(r13)
- mb
- br r31, sys_crd_dismiss_interrupt // just return
-
- //+
- // The stack is pushed. Load up a0,a1,a2 and vector via entInt
- //
- //-
-
- ALIGN_BRANCH
-sys_crd_post_interrupt:
- lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
- lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector
-
- blbc r12, 1f
- lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector
-
-1: subq r31, 1, r18 // get a -1
- mfpr r25, pt_entInt
-
- srl r18, 42, r18 // shift off low bits of kseg addr
- mtpr r25, exc_addr // load interrupt vector
-
- sll r18, 42, r18 // shift back into position
- or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
-
- hw_rei_spe // done
-
-
- //+
- // The stack is pushed. Need to back out of it all.
- //-
-
-sys_crd_dismiss_interrupt:
- br r31, Call_Pal_Rti
-
-
-// .sbttl sys_crd_scrub_mem
-
- //+
- //
- // sys_crd_scrub_mem
- // called
- // jsr r13, sys$crd_scrub_mem
- // r0 = addr of cache block
- //
- //-
-
-
-
- ALIGN_BLOCK // align for branch target
-sys_crd_scrub_mem:
- // now find error in memory, and attempt to scrub that cache block
- // This routine just scrubs the failing octaword
- // Only need to "touch" one quadword per octaword to accomplish the scrub
- srl r0, 39, r8 // get high bit of bad pa
- blbs r8, 1f // don't attempt fixup on IO space addrs
- nop // needed to align the ldqpl to octaword boundary
- nop // "
-
- ldqpl r8, 0(r0) // attempt to read the bad memory
- // location
- // (Note bits 63:40,3:0 of ei_addr
- // are set to 1, but as long as
- // we are doing a phys ref, should
- // be ok)
- nop // Needed to keep the Ibox from swapping the ldqpl into E1
-
- stqpc r8, 0(r0) // Store it back if it is still there.
- // If store fails, location already
- // scrubbed by someone else
-
- nop // needed to align the ldqpl to octaword boundary
-
- lda r8, 0x20(r31) // flip bit 5 to touch next hexaword
- xor r8, r0, r0
- nop // needed to align the ldqpl to octaword boundary
- nop // "
-
- ldqpl r8, 0(r0) // attempt to read the bad memory
- // location
- // (Note bits 63:40,3:0 of ei_addr
- // are set to 1, but as long as
- // we are doing a phys ref, should
- // be ok)
- nop // Needed to keep the Ibox from swapping the ldqpl into E1
-
- stqpc r8, 0(r0) // Store it back if it is still there.
- // If store fails, location already
- // scrubbed by someone else
-
- lda r8, 0x20(r31) // restore r0 to original address
- xor r8, r0, r0
-
- //at this point, ei_stat could be locked due to a new corr error on the ld,
- //so read ei_stat to unlock AFTER this routine.
-
-// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1
-1: ret r31, (r13) // and back we go
-
-
-// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
-//+
-// Machine check interrupt from the system. Setup and join the
-// regular machine check flow.
-// On exit:
-// pt0 - saved r0
-// pt1 - saved r1
-// pt4 - saved r4
-// pt5 - saved r5
-// pt6 - saved r6
-// pt10 - saved exc_addr
-// pt_misc<47:32> - mchk code
-// pt_misc<31:16> - scb vector
-// r14 - base of Cbox IPRs in IO space
-// MCES<mchk> is set
-//-
- ALIGN_BLOCK
-sys_int_mchk:
- lda r14, mchk_c_sys_hrd_error(r31)
- mfpr r12, exc_addr
-
- addq r14, 1, r14 // Flag as interrupt
- nop
-
- sll r14, 32, r14 // Move mchk code to position
- mtpr r12, pt10 // Stash exc_addr
-
- mfpr r12, pt_misc // Get MCES and scratch
- mtpr r0, pt0 // Stash for scratch
-
- zap r12, 0x3c, r12 // Clear scratch
- blbs r12, sys_double_machine_check // MCHK halt if double machine check
-
- or r12, r14, r12 // Combine mchk code
- lda r14, scb_v_sysmchk(r31) // Get SCB vector
-
- sll r14, 16, r14 // Move SCBv to position
- or r12, r14, r14 // Combine SCBv
-
- bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
- mtpr r14, pt_misc // Save mchk code!scbv!whami!mces
-
- ldah r14, 0xfff0(r31)
- mtpr r1, pt1 // Stash for scratch
-
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r4, pt4
-
- mtpr r5, pt5
-
-#if beh_model
-// .if ne beh_model
- ldah r25, 0xC000(r31) // Get base of demon space
- lda r25, 0x340(r25) // Add interrupt demon offset
-
- ldqp r13, 0(r25) // Read the control register
- nop
-
- and r13, 0x10, r8 // For debug, check that the interrupt is expected
- beq r8, interrupt_not_expected
-
- bic r13, 0x10, r13
- stqp r13, 0(r25) // Ack and clear the interrupt
-// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow
- .endc
-#endif
-
- mtpr r6, pt6
- br r31, sys_mchk_collect_iprs // Join common machine check flow
-
-
-// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code"
-//+
-//sys$int_perf_cnt
-//
-// A performance counter interrupt has been detected. The stack has been pushed.
-// IPL and PS are updated as well.
-//
-// on exit to interrupt entry point ENTINT::
-// a0 = osfint$c_perf
-// a1 = scb$v_perfmon (650)
-// a2 = 0 if performance counter 0 fired
-// a2 = 1 if performance counter 1 fired
-// a2 = 2 if performance counter 2 fired
-// (if more than one counter overflowed, an interrupt will be
-// generated for each counter that overflows)
-//
-//
-//-
- ALIGN_BLOCK
-sys_int_perf_cnt: // Performance counter interrupt
- lda r17, scb_v_perfmon(r31) // a1 to interrupt vector
- mfpr r25, pt_entint
-
- lda r16, osfint_c_perf(r31) // a0 to perf counter code
- mtpr r25, exc_addr
-
- //isolate which perf ctr fired, load code in a2, and ack
- mfpr r25, isr
- or r31, r31, r18 // assume interrupt was pc0
-
- srl r25, isr_v_pc1, r25 // isolate
- cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14
-
- srl r25, 1, r25 // get pc2
- cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14
-
- lda r25, 1(r31) // get a one
- sll r25, r18, r25
-
- sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt
- mtpr r25, hwint_clr
-
- hw_rei_spe
-
-
-
- ALIGN_BLOCK
-// .sbttl "System specific RESET code"
-//+
-// RESET code
-// On entry:
-// r1 = pal_base +8
-//
-// Entry state on trap:
-// r0 = whami
-// r2 = base of scratch area
-// r3 = halt code
-// and the following 3 if init_cbox is enabled:
-// r5 = sc_ctl
-// r6 = bc_ctl
-// r7 = bc_cnfg
-//
-// Entry state on switch:
-// r17 - new PC
-// r18 - new PCBB
-// r19 - new VPTB
-//
-//-
-
-#if rax_mode==0
- .globl sys_reset
-sys_reset:
-// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load
- mtpr r31, itb_ia // clear the ITB
- mtpr r31, dtb_ia // clear the DTB
-
- lda r1, -8(r1) // point to start of code
- mtpr r1, pal_base // initialize PAL_BASE
-
- // Interrupts
- mtpr r31, astrr // stop ASTs
- mtpr r31, aster // stop ASTs
- mtpr r31, sirr // clear software interrupts
-
- mtpr r0, pt1 // r0 is whami (unless we entered via swp)
-
-//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
- ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
-
-#if disable_crd == 0
-// .if eq disable_crd
- bis r31, 1, r0
- sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable>
- or r0, r1, r1 // Set the bit
-#endif
-
- mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable,
- // super page enabled, correct read per assembly option
-
- // Mbox/Dcache init
-//orig lda r1, <1@<mcsr$v_sp1>>(r31)
- lda r1,BIT(mcsr_v_sp1)(zero)
-
- mtpr r1, mcsr // MCSR - Super page enabled
- lda r1, BIT(dc_mode_v_dc_ena)(r31)
- ALIGN_BRANCH
-// mtpr r1, dc_mode // turn Dcache on
- nop
-
- mfpr r31, pt0 // No Mbox instr in 1,2,3,4
- mfpr r31, pt0
- mfpr r31, pt0
- mfpr r31, pt0
- mtpr r31, dc_flush // flush Dcache
-
- // build PS (IPL=7,CM=K,VMM=0,SW=0)
- lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7
- lda r1, 0x1F(r31)
- mtpr r1, ipl // set internal <ipl>=1F
- mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy
- mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy
-
- // Create the PALtemp pt_intmask -
- // MAP:
- // OSF IPL EV5 internal IPL(hex) note
- // 0 0
- // 1 1
- // 2 2
- // 3 14 device
- // 4 15 device
- // 5 16 device
- // 6 1E device,performance counter, powerfail
- // 7 1F
- //
-
- ldah r1, 0x1f1E(r31) // Create upper lw of int_mask
- lda r1, 0x1615(r1)
-
- sll r1, 32, r1
- ldah r1, 0x1402(r1) // Create lower lw of int_mask
-
- lda r1, 0x0100(r1)
- mtpr r1, pt_intmask // Stash in PALtemp
-
- // Unlock a bunch of chip internal IPRs
- mtpr r31, exc_sum // clear out exeception summary and exc_mask
- mfpr r31, va // unlock va, mmstat
-//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
- lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
-
- mtpr r8, icperr_stat // Clear Icache parity error & timeout status
-//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
- lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
-
- mtpr r8, dcperr_stat // Clear Dcache parity error status
-
- rc r0 // clear intr_flag
- mtpr r31, pt_trap
-
- mfpr r0, pt_misc
- srl r0, pt_misc_v_switch, r1
- blbs r1, sys_reset_switch // see if we got here from swppal
-
- // Rest of the "real" reset flow
- // ASN
- mtpr r31, dtb_asn
- mtpr r31, itb_asn
-
- lda r1, 0x67(r31)
- sll r1, hwint_clr_v_pc0c, r1
- mtpr r1, hwint_clr // Clear hardware interrupt requests
-
- lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
- mfpr r0, pt1 // get whami
- insbl r0, 1, r0 // isolate whami in correct pt_misc position
- or r0, r1, r1 // combine whami and mces
- mtpr r1, pt_misc // store whami and mces, swap bit clear
-
- zapnot r3, 1, r0 // isolate halt code
- mtpr r0, pt0 // save entry type
-
- // Cycle counter
- or r31, 1, r9 // get a one
- sll r9, 32, r9 // shift to <32>
- mtpr r31, cc // clear Cycle Counter
- mtpr r9, cc_ctl // clear and enable the Cycle Counter
- mtpr r31, pt_scc // clear System Cycle Counter
-
-
- // Misc PALtemps
- mtpr r31, maf_mode // no mbox instructions for 3 cycles
- or r31, 1, r1 // get bogus scbb value
- mtpr r1, pt_scbb // load scbb
- mtpr r31, pt_prbr // clear out prbr
-#ifdef SIMOS
- // yes, this is ugly, but you figure out a better
- // way to get the address of the kludge_initial_pcbb
- // in r1 with an uncooperative assembler --ali
- br r1, kludge_getpcb_addr
- br r31, kludge_initial_pcbb
-kludge_getpcb_addr:
- ldqp r19, 0(r1)
- sll r19, 44, r19
- srl r19, 44, r19
- mulq r19,4,r19
- addq r19, r1, r1
- addq r1,4,r1
-// or zero,kludge_initial_pcbb,r1
-// GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
-#else
- mfpr r1, pal_base
-//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
- GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
-#endif
- mtpr r1, pt_pcbb // load pcbb
- lda r1, 2(r31) // get a two
- sll r1, 32, r1 // gen up upper bits
- mtpr r1, mvptbr
- mtpr r1, ivptbr
- mtpr r31, pt_ptbr
- // Performance counters
- mtpr r31, pmctr
-
-#if init_cbox != 0
-// .if ne init_cbox
- // Only init the Scache and the Bcache if there have been no previous
- // cacheable dstream loads or stores.
- //
- // Inputs:
- // r5 - sc_ctl
- // r6 - bc_ctl
- // r7 - bc_cnfg
-
- ldah r0, 0xfff0(r31)
- zap r0, 0xE0, r0 // Get Cbox IPR base
- ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
-temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
- lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
- sll r20, 1, r20
-temp = 0x017441 // default bc_config
- get_addr r21, temp, r31 // create default bc_config
- lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
-
-// XXX bugnion pvc$jsr scbcctl, bsr=1
- bsr r10, set_sc_bc_ctl
- update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
- store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area
-// .endc
-#endif
- // Clear pmctr_ctl in impure area
-
-#ifndef SIMOS
- // can't assemble ???
- update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed
-#endif
-
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-#ifndef SIMOS
- ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr
- ldqp r31, ei_stat(r14)
- ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
-#endif
- GET_IMPURE(r13)
- stqpc r31, 0(r13) // Clear lock_flag
-
- mfpr r0, pt0 // get entry type
- br r31, sys_enter_console // enter the cosole
-
-#endif /* rax_mode == 0 */
-
-
-
-
-//.if ne rax_mode
-#if rax_mode != 0
-
- // For RAX:
- // r0 - icsr at first, then used for cbox ipr base offset
- // r2 - mcsr
- // r3 - dc_mode
- // r4 - maf_mode
- // r5 - sc_ctl
- // r6 - bc_ctl
- // r7 - bc_cnfg
- .globl sys_reset
-sys_reset:
- mtpr r31, ev5__dtb_cm // set mbox mode to kernel
- mtpr r31, ev5__ps // set Ibox mode to kernel - E1
-
- mtpr r0, ev5__icsr // Load ICSR - E1
-
- mtpr r2, ev5__mcsr
- mfpr r8, pal_base
-
- ldah r0, 0xfff0(r31)
- zap r0, 0xE0, r0 // Get Cbox IPR base
-
- mtpr r31, ev5__itb_asn // clear asn - E1
- ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
-
-temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
- lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
- sll r20, 1, r20
-
-temp = 0x017441 // default bc_config
- get_addr r21, temp, r31 // create default bc_config
- lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
-
-// XXX bugnion pvc$jsr scbcctl, bsr=1
- bsr r10, set_sc_bc_ctl
- update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2
- store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl
- store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow
-
- mtpr r3, ev5__dc_mode // write dc_mode
- mtpr r31, ev5__dc_flush // flush dcache
-
- mtpr r31, ev5__exc_sum // clear exc_sum - E1
- mtpr r31, ev5__exc_mask // clear exc_mask - E1
-
- ldah r2, 4(r31) // For EXC_ADDR
- mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex)
-
- mtpr r31, ev5__sirr // Clear SW interrupts (for ISP)
- mtpr r4, ev5__maf_mode // write maf_mode
-
- mtpr r31, ev5__alt_mode // set alt_mode to kernel
- mtpr r31, ev5__itb_ia // clear ITB - E1
-
- lda r1, 0x1F(r31) // For IPL
- mtpr r1, ev5__ipl // IPL to 1F
-
- mtpr r31, ev5__hwint_clr // clear hardware interrupts
- mtpr r31, ev5__aster // disable AST interrupts
-
- mtpr r31, ev5__astrr // clear AST requests
- mtpr r31, ev5__dtb_ia // clear dtb
-
- nop
- mtpr r31, pt_trap
-
- srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000
- sll r9, 32, r9
-
- lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set
- nop
-
- mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000
- mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000
-
- mtpr r2, dtb_tag
- mtpr r9, itb_pte
-
- and r31, r31, r0 // clear deposited registers, note: r2 already overwritten
- and r31, r31, r3
-
- and r31, r31, r4
- and r31, r31, r5
-
- and r31, r31, r6
- and r31, r31, r7
-
- hw_rei //May need to be a rei_stall since
- //we write to TB's above
- //However, it currently works ok. (JH)
-
-
-// .endc
-#endif /*rax_mode != 0 */
-
-
- // swppal entry
- // r0 - pt_misc
- // r17 - new PC
- // r18 - new PCBB
- // r19 - new VPTB
-sys_reset_switch:
- or r31, 1, r9
- sll r9, pt_misc_v_switch, r9
- bic r0, r9, r0 // clear switch bit
- mtpr r0, pt_misc
-
- rpcc r1 // get cyccounter
-
- ldqp r22, osfpcb_q_fen(r18) // get new fen/pme
- ldlp r23, osfpcb_l_cc(r18) // get cycle counter
- ldlp r24, osfpcb_l_asn(r18) // get new asn
-
-
- ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr
- sll r25, page_offset_size_bits, r25 // convert pfn to pa
- mtpr r25, pt_ptbr // load the new mmptr
- mtpr r18, pt_pcbb // set new pcbb
-
- bic r17, 3, r17 // clean use pc
- mtpr r17, exc_addr // set new pc
- mtpr r19, mvptbr
- mtpr r19, ivptbr
-
- ldqp r30, osfpcb_q_Usp(r18) // get new usp
- mtpr r30, pt_usp // save usp
-
- sll r24, dtb_asn_v_asn, r8
- mtpr r8, dtb_asn
- sll r24, itb_asn_v_asn, r24
- mtpr r24, itb_asn
-
- mfpr r25, icsr // get current icsr
- lda r24, 1(r31)
- sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position
- bic r25, r24, r25 // clean out old fpe
- and r22, 1, r22 // isolate new fen bit
- sll r22, icsr_v_fpe, r22
- or r22, r25, r25 // or in new fpe
- mtpr r25, icsr // update ibox ipr
-
- subl r23, r1, r1 // gen new cc offset
- insll r1, 4, r1 // << 32
- mtpr r1, cc // set new offset
-
- or r31, r31, r0 // set success
- ldqp r30, osfpcb_q_Ksp(r18) // get new ksp
- mfpr r31, pt0 // stall
- hw_rei_stall
-
-// .sbttl "SYS_MACHINE_CHECK - Machine check PAL"
- ALIGN_BLOCK
-//+
-//sys$machine_check
-// A machine_check trap has occurred. The Icache has been flushed.
-//
-//-
-
-EXPORT(sys_machine_check)
- // Need to fill up the refill buffer (32 instructions) and
- // then flush the Icache again.
- // Also, due to possible 2nd Cbox register file write for
- // uncorrectable errors, no register file read or write for 7 cycles.
-
- nop
- mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later
-
- nop
- nop
-
- nop
- nop
-
- nop
- nop
-
- nop
- nop
- // 10 instructions// 5 cycles
-
- nop
- nop
-
- nop
- nop
-
- // Register file can now be written
- lda r0, scb_v_procmchk(r31) // SCB vector
- mfpr r13, pt_mces // Get MCES
- sll r0, 16, r0 // Move SCBv to correct position
-// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit
- bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
-
-
- zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word
- mtpr r14, pt_mces
- // 20 instructions
-
- nop
- or r14, r0, r14 // Insert new SCB vector
- lda r0, mchk_c_proc_hrd_error(r31) // MCHK code
- mfpr r12, exc_addr
-
- sll r0, 32, r0 // Move MCHK code to correct position
- mtpr r4, pt4
- or r14, r0, r14 // Insert new MCHK code
- mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv
-
- ldah r14, 0xfff0(r31)
- mtpr r1, pt1 // Stash for scratch - 30 instructions
-
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r12, pt10 // Stash exc_addr
-
-
-
- mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed.
- blbs r13, sys_double_machine_check // MCHK halt if double machine check
-
- mtpr r6, pt6
- mtpr r5, pt5
-
- // Look for the powerfail cases here....
- mfpr r4, isr
- srl r4, isr_v_pfl, r4
- blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending
- lda r4, 0xffc4(r31) // get GBUS$MISCR address bits
- sll r4, 24, r4 // shift to proper position
- ldqp r4, 0(r4) // read GBUS$MISCR
- srl r4, 5, r4 // isolate bit <5>
- blbc r4, sys_mchk_collect_iprs // skip if already cleared
- // No missed CFAIL mchk
- lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits
- sll r5, 24, r5 // shift to proper position
- lda r6, 0x40(r31) // get bit <6> mask
- ldqp r4, 0(r5) // read GBUS$SERNUM
- or r4, r6, r6 // set bit <6>
- stqp r6, 0(r5) // clear GBUS$SERNUM<6>
- mb
- mb
-
-
- //+
- // Start to collect the IPRs. Common entry point for mchk flows.
- //
- // Current state:
- // pt0 - saved r0
- // pt1 - saved r1
- // pt4 - saved r4
- // pt5 - saved r5
- // pt6 - saved r6
- // pt10 - saved exc_addr
- // pt_misc<47:32> - mchk code
- // pt_misc<31:16> - scb vector
- // r14 - base of Cbox IPRs in IO space
- // r0, r1, r4, r5, r6, r12, r13, r25 - available
- // r8, r9, r10 - available as all loads are physical
- // MCES<mchk> is set
- //
- //-
-
-EXPORT(sys_mchk_collect_iprs)
- mb // MB before reading Scache IPRs
- mfpr r1, icperr_stat
-
- mfpr r8, dcperr_stat
- mtpr r31, dc_flush // Flush the Dcache
-
- mfpr r31, pt0 // Pad Mbox instructions from dc_flush
- mfpr r31, pt0
- nop
- nop
-
- ldqp r9, sc_addr(r14) // SC_ADDR IPR
- bis r9, r31, r31 // Touch ld to make sure it completes before
- // read of SC_STAT
- ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR
-
- ldqp r12, ei_addr(r14) // EI_ADDR IPR
- ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR
- ldqp r0, fill_syn(r14) // FILL_SYN IPR
- bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT
- bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT
- ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- ldqp r31, ei_stat(r14) // Read again to insure it is unlocked
-
-
-
-
- //+
- // Look for nonretryable cases
- // In this segment:
- // r5<0> = 1 means retryable
- // r4, r6, and r14 are available for scratch
- //
- //-
-
-
- bis r31, r31, r5 // Clear local retryable flag
- srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits
-
- lda r4, 1(r31)
- sll r4, icperr_stat_v_tmr, r4
- and r1, r4, r4 // Timeout reset
- bne r4, sys_cpu_mchk_not_retryable
-
- and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked
- bne r4, sys_cpu_mchk_not_retryable
-
- lda r4, 1(r31)
- sll r4, sc_stat_v_sc_scnd_err, r4
- and r10, r4, r4 // 2nd Scache error occurred
- bne r4, sys_cpu_mchk_not_retryable
-
-
- bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control
- // Parity Error, Interface Parity Error, 2nd Error
-
- and r25, r4, r4
- bne r4, sys_cpu_mchk_not_retryable
-
-// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
- bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
- and r25, r4, r4 // Isolate the Uncorrectable Error Bit
-// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
- bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
- cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error
- bne r4, sys_cpu_mchk_not_retryable
-
- lda r4, 7(r31)
- and r10, r4, r4 // Isolate the Scache Tag Parity Error bits
- bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable
-
-
- lda r4, 0x7f8(r31)
- and r10, r4, r4 // Isolate the Scache Data Parity Error bits
- srl r10, sc_stat_v_cbox_cmd, r6
- and r6, 0x1f, r6 // Isolate Scache Command field
- subq r6, 1, r6 // Scache Iread command = 1
- cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error
- bne r4, sys_cpu_mchk_not_retryable
-
- // Look for the system unretryable cases here....
-
- mfpr r4, isr // mchk_interrupt pin asserted
- srl r4, isr_v_mck, r4
- blbs r4, sys_cpu_mchk_not_retryable
-
-
-
- //+
- // Look for retryable cases
- // In this segment:
- // r5<0> = 1 means retryable
- // r6 - holds the mchk code
- // r4 and r14 are available for scratch
- //
- //-
-
-
- // Within the chip, the retryable cases are Istream errors
- lda r4, 3(r31)
- sll r4, icperr_stat_v_dpe, r4
- and r1, r4, r4
- cmovne r4, 1, r5 // Retryable if just Icache parity error
-
-
- lda r4, 0x7f8(r31)
- and r10, r4, r4 // Isolate the Scache Data Parity Error bits
- srl r10, sc_stat_v_cbox_cmd, r14
- and r14, 0x1f, r14 // Isolate Scache Command field
- subq r14, 1, r14 // Scache Iread command = 1
- cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set
- cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread
- bis r4, r5, r5 // Accumulate
-
-
- bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
- and r25, r4, r4 // Isolate the Uncorrectable Error Bit
- and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
- cmovne r4, 1, r4 // r4 = 1 if uncorr error
- cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread
- bis r4, r5, r5 // Accumulate
-
- mfpr r6, pt_misc
- extwl r6, 4, r6 // Fetch mchk code
- bic r6, 1, r6 // Clear flag from interrupt flow
- cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code
-
-
-
- // In the system, the retryable cases are ...
- // (code here handles beh model read NXM)
-
-#if beh_model != 0
-// .if ne beh_model
- ldah r4, 0xC000(r31) // Get base of demon space
- lda r4, 0x550(r4) // Add NXM demon flag offset
-
- ldqp r4, 0(r4) // Read the demon register
- lda r14, mchk_c_read_nxm(r31)
- cmovlbs r4, r14, r6 // Set mchk code if read NXM
- cmovlbs r4, 1, r4
- bis r4, r5, r5 // Accumulate retry bit
-#endif
-
-
- //+
- // Write the logout frame
- //
- // Current state:
- // r0 - fill_syn
- // r1 - icperr_stat
- // r4 - available
- // r5<0> - retry flag
- // r6 - mchk code
- // r8 - dcperr_stat
- // r9 - sc_addr
- // r10 - sc_stat
- // r12 - ei_addr
- // r13 - bc_tag_addr
- // r14 - available
- // r25 - ei_stat (shifted)
- // pt0 - saved r0
- // pt1 - saved r1
- // pt4 - saved r4
- // pt5 - saved r5
- // pt6 - saved r6
- // pt10 - saved exc_addr
- //
- //-
-
-sys_mchk_write_logout_frame:
- // Get base of the logout area.
- GET_IMPURE(r14) // addr of per-cpu impure area
- GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)
-
- // Write the first 2 quadwords of the logout area:
-
- sll r5, 63, r5 // Move retry flag to bit 63
- lda r4, mchk_size(r5) // Combine retry flag and frame size
- stqp r4, mchk_flag(r14) // store flag/frame size
- lda r4, mchk_sys_base(r31) // sys offset
- sll r4, 32, r4
- lda r4, mchk_cpu_base(r4) // cpu offset
- stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame
-
- //+
- // Write the mchk code to the logout area
- // Write error IPRs already fetched to the logout area
- // Restore some GPRs from PALtemps
- //-
-
- mfpr r5, pt5
- stqp r6, mchk_mchk_code(r14)
- mfpr r4, pt4
- stqp r1, mchk_ic_perr_stat(r14)
- mfpr r6, pt6
- stqp r8, mchk_dc_perr_stat(r14)
- mfpr r1, pt1
- stqp r9, mchk_sc_addr(r14)
- stqp r10, mchk_sc_stat(r14)
- stqp r12, mchk_ei_addr(r14)
- stqp r13, mchk_bc_tag_addr(r14)
- stqp r0, mchk_fill_syn(r14)
- mfpr r0, pt0
- sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position
- // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
- ldah r13, 0xfff0(r31)
- zapnot r13, 0x1f, r13
- ldqp r13, ei_stat(r13)
- sll r13, 64-ei_stat_v_bc_tperr, r13
- srl r13, 64-ei_stat_v_bc_tperr, r13
- or r25, r13, r25
- stqp r25, mchk_ei_stat(r14)
-
-
-
-
- //+
- // complete the CPU-specific part of the logout frame
- //-
-
-#ifndef SIMOS
- // cant' assemble.Where is the macro ?
- mchk_logout mm_stat
- mchk_logout va // Unlocks VA and MM_STAT
- mchk_logout isr
- mchk_logout icsr
- mchk_logout pal_base
- mchk_logout exc_mask
- mchk_logout exc_sum
-#endif
-
- ldah r13, 0xfff0(r31)
- zap r13, 0xE0, r13 // Get Cbox IPR base
- ldqp r13, ld_lock(r13) // Get ld_lock IPR
- stqp r13, mchk_ld_lock(r14) // and stash it in the frame
-
- //+
- // complete the PAL-specific part of the logout frame
- //-
-#ifdef vms
- t = 0
- .repeat 24
- pt_mchk_logout \t
- t = t + 1
- .endr
-#endif
-#ifndef SIMOS
- //can't assemble ?
- pt_mchk_logout 0
- pt_mchk_logout 1
- pt_mchk_logout 2
- pt_mchk_logout 3
- pt_mchk_logout 4
- pt_mchk_logout 5
- pt_mchk_logout 6
- pt_mchk_logout 7
- pt_mchk_logout 8
- pt_mchk_logout 9
- pt_mchk_logout 10
- pt_mchk_logout 11
- pt_mchk_logout 12
- pt_mchk_logout 13
- pt_mchk_logout 14
- pt_mchk_logout 15
- pt_mchk_logout 16
- pt_mchk_logout 17
- pt_mchk_logout 18
- pt_mchk_logout 19
- pt_mchk_logout 20
- pt_mchk_logout 21
- pt_mchk_logout 22
- pt_mchk_logout 23
-#endif
-
-
- //+
- // Log system specific info here
- //-
-
-#if alpha_fw != 0
-// .if ne alpha_fw
-storeTLEP_:
- lda r13, 0xffc4(r31) // Get GBUS$MISCR address
- sll r13, 24, r13
- ldqp r13, 0(r13) // Read GBUS$MISCR
- sll r13, 16, r13 // shift up to proper field
- mfpr r8, pt_whami // get our node id
- extbl r8, 1, r8 // shift to bit 0
- or r13, r8, r13 // merge MISCR and WHAMI
- stlp r13, mchk$gbus(r14) // write to logout area
- srl r8, 1, r8 // shift off cpu number
-
- Get_TLSB_Node_Address r8,r13 // compute our nodespace address
-
- OSFmchk_TLEPstore tldev, tlsb=1
- OSFmchk_TLEPstore tlber, tlsb=1, clr=1
- OSFmchk_TLEPstore tlcnr, tlsb=1
- OSFmchk_TLEPstore tlvid, tlsb=1
- OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1
- OSFmchk_TLEPstore tlmodconfig
- OSFmchk_TLEPstore tlepaerr, clr=1
- OSFmchk_TLEPstore tlepderr, clr=1
- OSFmchk_TLEPstore tlepmerr, clr=1
- OSFmchk_TLEPstore tlintrmask0
- OSFmchk_TLEPstore tlintrmask1
- OSFmchk_TLEPstore tlintrsum0
- OSFmchk_TLEPstore tlintrsum1
- OSFmchk_TLEPstore tlep_vmg
-// .endc
-#endif /*alpha_fw != 0 */
- // Unlock IPRs
- lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
- mtpr r8, dcperr_stat // Clear Dcache parity error status
-
- lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
- mtpr r8, icperr_stat // Clear Icache parity error & timeout status
-
-1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value
- GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value
- and r0, r8, r0 // compare
- beq r0, 2f // check next case if nothing set
- lda r0, mchk_c_retryable_ird(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value
- GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value
- and r0, r8, r0 // compare
- beq r0, 3f // check next case if nothing set
- lda r0, mchk_c_dcperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value
- GET_ADDR(r0,0x107ff,r31) // get SC_STAT value
- and r0, r8, r0 // compare
- beq r0, 4f // check next case if nothing set
- lda r0, mchk_c_scperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
- GET_ADDR(r0,0x30000000,r31) // get EI_STAT value
- and r0, r8, r0 // compare
- beq r0, 5f // check next case if nothing set
- lda r0, mchk_c_bcperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-5: ldlp r8, mchk_tlber(r14) // get TLBER value
- GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value
- sll r0, 16, r0 // shift into proper position
- GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value
- or r0, r1, r0 // merge mask values
- and r0, r8, r0 // compare
- beq r0, 6f // check next case if nothing set
- GET_ADDR(r0, 0xfff0, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
- GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value
- and r0, r8, r0 // compare
- beq r0, 7f // check next case if nothing set
- GET_ADDR(r0, 0xfffa, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value
- GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value
- and r0, r8, r0 // compare
- beq r0, 8f // check next case if nothing set
- GET_ADDR(r0, 0xfffb, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value
- GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value
- and r0, r8, r0 // compare
- beq r0, 9f // check next case if nothing set
- GET_ADDR(r0, 0xfffc, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
- GET_ADDR(r0,0xb,r31) // get EI_STAT mask value
- sll r0, 32, r0 // shift to upper lw
- and r0, r8, r0 // compare
- beq r0, 1f // check next case if nothing set
- GET_ADDR(r0,0xfffd,r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
- GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value
- and r0, r8, r0 // compare
- beq r0, cont_logout_frame // check next case if nothing set
- GET_ADDR(r0, 0xfffe, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-do_670: lda r8, scb_v_procmchk(r31) // SCB vector
- br r31, do_6x0_cont
-do_660: lda r8, scb_v_sysmchk(r31) // SCB vector
-do_6x0_cont:
- sll r8, 16, r8 // shift to proper position
- mfpr r1, pt_misc // fetch current pt_misc
- GET_ADDR(r4,0xffff, r31) // mask for vector field
- sll r4, 16, r4 // shift to proper position
- bic r1, r4, r1 // clear out old vector field
- or r1, r8, r1 // merge in new vector
- mtpr r1, pt_misc // save new vector field
- stlp r0, mchk_mchk_code(r14) // save new mchk code
-
-cont_logout_frame:
- // Restore some GPRs from PALtemps
- mfpr r0, pt0
- mfpr r1, pt1
- mfpr r4, pt4
-
- mfpr r12, pt10 // fetch original PC
- blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal
-
-//XXXbugnion pvc_jsr armc, bsr=1
- bsr r12, sys_arith_and_mchk // go check for and deal with arith trap
-
- mtpr r31, exc_sum // Clear Exception Summary
-
- mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc
- stqp r25, mchk_exc_addr(r14)
-
- //+
- // Set up the km trap
- //-
-
-
-sys_post_mchk_trap:
- mfpr r25, pt_misc // Check for flag from mchk interrupt
- extwl r25, 4, r25
- blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
-
- bis r14, r31, r12 // stash pointer to logout area
- mfpr r14, pt10 // get exc_addr
-
- sll r11, 63-3, r25 // get mode to msb
- bge r25, 3f
-
- mtpr r31, dtb_cm
- mtpr r31, ev5__ps
-
- mtpr r30, pt_usp // save user stack
- mfpr r30, pt_ksp
-
-3:
- lda sp, 0-osfsf_c_size(sp) // allocate stack space
- nop
-
- stq r18, osfsf_a2(sp) // a2
- stq r11, osfsf_ps(sp) // save ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entint // get the VA of the interrupt routine
-
- stq r16, osfsf_a0(sp) // a0
- lda r16, osfint_c_mchk(r31) // flag as mchk in a0
-
- stq r17, osfsf_a1(sp) // a1
- mfpr r17, pt_misc // get vector
-
- stq r29, osfsf_gp(sp) // old gp
- mtpr r25, exc_addr //
-
- or r31, 7, r11 // get new ps (km, high ipl)
- subq r31, 1, r18 // get a -1
-
- extwl r17, 2, r17 // a1 <- interrupt vector
- bis r31, ipl_machine_check, r25
-
- mtpr r25, ipl // Set internal ipl
- srl r18, 42, r18 // shift off low bits of kseg addr
-
- sll r18, 42, r18 // shift back into position
- mfpr r29, pt_kgp // get the kern r29
-
- or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
- hw_rei_spe // out to interrupt dispatch routine
-
-
- //+
- // The stack is pushed. Load up a0,a1,a2 and vector via entInt
- //
- //-
- ALIGN_BRANCH
-sys_mchk_stack_done:
- lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
- lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector
-
- subq r31, 1, r18 // get a -1
- mfpr r25, pt_entInt
-
- srl r18, 42, r18 // shift off low bits of kseg addr
- mtpr r25, exc_addr // load interrupt vector
-
- sll r18, 42, r18 // shift back into position
- or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
-
- hw_rei_spe // done
-
-
- ALIGN_BRANCH
-sys_cpu_mchk_not_retryable:
- mfpr r6, pt_misc
- extwl r6, 4, r6 // Fetch mchk code
- br r31, sys_mchk_write_logout_frame //
-
-
-
-//+
-//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
-// already set. We will now double machine check halt.
-//
-// pt0 - old R0
-//
-//+
-
-EXPORT(sys_double_machine_check)
-#ifndef SIMOS
- pvc$jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_dbl_mchk(r31)
- br r31, sys_enter_console
-
-//+
-//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
-// a PAL PC. We will now machine check halt.
-//
-// pt0 - old R0
-//
-//+
-sys_machine_check_while_in_pal:
- stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written
-
-#ifndef SIMOS
- pvc$jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_mchk_from_pal(r31)
- br r31, sys_enter_console
-
-
-//ARITH and MCHK
-// Check for arithmetic errors and build trap frame,
-// but don't post the trap.
-// on entry:
-// pt10 - exc_addr
-// r12 - return address
-// r14 - logout frame pointer
-// r13 - available
-// r8,r9,r10 - available except across stq's
-// pt0,1,6 - available
-//
-// on exit:
-// pt10 - new exc_addr
-// r17 = exc_mask
-// r16 = exc_sum
-// r14 - logout frame pointer
-//
- ALIGN_BRANCH
-sys_arith_and_mchk:
- mfpr r13, ev5__exc_sum
- srl r13, exc_sum_v_swc, r13
- bne r13, handle_arith_and_mchk
-
-// XXX bugnion pvc$jsr armc, bsr=1, dest=1
- ret r31, (r12) // return if no outstanding arithmetic error
-
-handle_arith_and_mchk:
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r14, pt0
-
- mtpr r1, pt1 // get a scratch reg
- and r11, osfps_m_mode, r1 // get mode bit
-
- bis r11, r31, r25 // save ps
- beq r1, 1f // if zero we are in kern now
-
- bis r31, r31, r25 // set the new ps
- mtpr r30, pt_usp // save user stack
-
- mfpr r30, pt_ksp // get kern stack
-1:
- mfpr r14, exc_addr // get pc into r14 in case stack writes fault
-
- lda sp, 0-osfsf_c_size(sp) // allocate stack space
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r1, pt_entArith
- stq r14, osfsf_pc(sp) // save pc
-
- stq r17, osfsf_a1(sp)
- mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
-
- stq r29, osfsf_gp(sp)
- stq r16, osfsf_a0(sp) // save regs
-
- bis r13, r31, r16 // move exc_sum to r16
- stq r18, osfsf_a2(sp)
-
- stq r11, osfsf_ps(sp) // save ps
- mfpr r29, pt_kgp // get the kern gp
-
- mfpr r14, pt0 // restore logout frame pointer from pt0
- bis r25, r31, r11 // set new ps
-
- mtpr r1, pt10 // Set new PC
- mfpr r1, pt1
-
-// XXX bugnion pvc$jsr armc, bsr=1, dest=1
- ret r31, (r12) // return if no outstanding arithmetic error
-
-
-
-// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"
-
- ALIGN_BLOCK
-
-// SYS$enter_console
-//
-// Entry:
-// Entered when PAL wants to enter the console.
-// usually as the result of a HALT instruction or button,
-// or catastrophic error.
-//
-// Regs on entry...
-//
-// R0 = halt code
-// pt0 <- r0
-//
-// Function:
-//
-// Save all readable machine state, and "call" the console
-//
-// Returns:
-//
-//
-// Notes:
-//
-// In these routines, once the save state routine has been executed,
-// the remainder of the registers become scratchable, as the only
-// "valid" copy of them is the "saved" copy.
-//
-// Any registers or PTs that are modified before calling the save
-// routine will have there data lost. The code below will save all
-// state, but will loose pt 0,4,5.
-//
-//-
-
-EXPORT(sys_enter_console)
- mtpr r1, pt4
- mtpr r3, pt5
-#ifdef SIMOS
- subq r31, 1, r1
- sll r1, 42, r1
- ldah r1, 1(r1)
-#else /* SIMOS */
- lda r3, pal_enter_console_ptr(r31) //find stored vector
- ldqp r1, 0(r3)
-#endif /* SIMOS */
-
-#ifdef SIMOS
- /* taken from scrmax, seems like the obvious thing to do */
- mtpr r1, exc_addr
- mfpr r1, pt4
- mfpr r3, pt5
- STALL
- STALL
- hw_rei_stall
-#else
- pvc$violate 1007
- jmp r31, (r1) // off to common routine
-#endif
-
-
-// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
-//+
-// sys$exit_console
-//
-// Entry:
-// Entered when console wants to reenter PAL.
-// usually as the result of a CONTINUE.
-//
-//
-// Regs' on entry...
-//
-//
-// Function:
-//
-// Restore all readable machine state, and return to user code.
-//
-//
-//
-//-
- ALIGN_BLOCK
-sys_exit_console:
- //Disable physical mode:
-#if enable_physical_console != 0
-// .if ne enable_physical_console
- mfpr r25, pt_ptbr
- bic r25, 1, r25 // clear physical console flag
- mtpr r25, pt_ptbr
-#endif
-
- GET_IMPURE(r1)
-
- // clear lock and intr_flags prior to leaving console
- rc r31 // clear intr_flag
- // lock flag cleared by restore_state
-#ifndef SIMOS
- pvc$jsr rststa, bsr=1
- bsr r3, pal_restore_state // go restore all state
- // note, R1 and R3 are NOT restored
- // by restore_state.
-#endif
- // TB's have been flushed
-
- ldqp r3, (cns_gpr+(8*3))(r1) // restore r3
- ldqp r1, (cns_gpr+8)(r1) // restore r1
- hw_rei_stall // back to user
-
-#if turbo_pcia_intr_fix != 0
-// .if ne turbo_pcia_intr_fix
-check_pcia_intr:
- mfpr r14, pt14 // fetch saved PCIA interrupt info
- beq r14, check_done // don't bother checking if no info
- mfpr r13, ipl // check the current IPL
- bic r13, 3, r25 // isolate ipl<5:2>
- cmpeq r25, 0x14, r25 // is it an I/O interrupt?
- beq r25, check_done // no, return
- and r13, 3, r25 // get I/O interrupt index
- extbl r14, r25, r13 // extract info for this interrupt
- beq r13, check_done // if no info, return
-
- // This is an RTI from a PCIA interrupt
- lda r12, 1(r31) // get initial bit mask
- sll r12, r25, r25 // shift to select interrupt index
- zap r14, r25, r14 // clear out info from this interrupt
- mtpr r14, pt14 // and save it
-
- and r13, 3, r25 // isolate HPC field
- subq r25, 1, r25 // subtract 1 to get HPC number
- srl r13, 2, r13 // generate base register address
- sll r13, 6, r13 // get slot/hose address bits
- lda r13, 0x38(r13) // insert other high bits
- sll r13, 28, r13 // shift high bits into position
-
- // Read the IPROGx register
- sll r25, 21, r14 // HPC address bit position
- or r13, r14, r14 // add in upper bits
- lda r14, 0x400(r14) // add in lower bits
- ldqp r14, 0(r14) // read IPROG
- srl r14, 4, r12 // check the In Progress bit
- blbc r12, 1f // skip if none in progress
- and r14, 0xf, r14 // isolate interrupt source
- lda r12, 1(r31) // make initial mask
- sll r12, r14, r14 // shift to make new intr source mask
- br r31, 2f
- // Write the SMPLIRQx register
-1: or r31, r31, r14 // default interrupt source mask
-2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data
- bic r12, r14, r12 // clear any interrupts in progres
-//orig lda r14, <0xbffc@-2>(r31) // get register address bits
- lda r14,(0xbffc>>2)(r31)
-
- sll r14, 10, r14 // shift into position
- or r14, r13, r14 // add in upper bits
- sll r25, 8, r25 // shift HPC number into position
- or r14, r25, r14 // add in lower bits
- stqp r12, 0(r14) // write SMPLIRQx register
- mb
- ldqp r12, 0(r14) // read it back
- bis r12, r12, r12 // touch register to insure completion
-
-check_done: // do these now and return
- lda r25, osfsf_c_size(sp) // get updated sp
- bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
- br r31, pcia_check_return
-#endif
-
-
-// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only
-
- ALIGN_128
-.globl kludge_initial_pcbb
-kludge_initial_pcbb: // PCB is 128 bytes long
-// .repeat 16
-// .quad 0
-// .endr
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
-// .sbttl "SET_SC_BC_CTL subroutine"
-//
-// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
-// There must be no outstanding memory references -- istream or dstream -- when
-// these registers are written. EV5 prefetcher is difficult to turn off. So,
-// this routine needs to be exactly 32 instructions long// the final jmp must
-// be in the last octaword of a page (prefetcher doesn't go across page)
-//
-//
-// Register expecations:
-// r0 base address of CBOX iprs
-// r5 value to set sc_ctl to (flush bit is added in)
-// r6 value to set bc_ctl to
-// r7 value to set bc_config to
-// r10 return address
-// r19 old sc_ctl value
-// r20 old value of bc_ctl
-// r21 old value of bc_config
-// r23 flush scache flag
-// Register usage:
-// r17 sc_ctl with flush bit cleared
-// r22 loop address
-//
-//
-#ifndef SIMOS
- align_page <32*4> // puts start of routine at next page boundary minus 32 longwords.
-#endif
-
-set_sc_bc_ctl:
-
-#ifndef SIMOS
- br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest
-sc_ctl_loop:
-// XXX bugnion pvc$jsr scloop, dest=1
- mb
- mb
-
- bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23)
-
- stqp r19, ev5__sc_ctl(r0) // write sc_ctl
- stqp r20, ev5__bc_ctl(r0) // write bc_ctl
- bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop
- stqp r21, bc_config(r0) // write bc_config register
- bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop
-
- bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set
- //NOTE: only works because flush bit is in lower 16 bits
-
- wmb // don't merge with other writes
- stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit
- ldqp r17, ev5__sc_ctl(r0) // read sc_ctl
- bis r17, r17, r17 // stall until the data comes back
- bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop
-
- // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
- t = 0
- .repeat 15
- unop
- t = t + 1
- .endr
- $opdef mnemonic= myjmp, -
- format= <custom=iregister, iregister, branch_offset>, -
- encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>
-
-// XXXbugnion pvc$jsr scloop
- myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
- // of straight) // r22 gets sc_ctl_done
- // 2nd time, code continues at sc_ctl_done (I hope)
-sc_ctl_done:
-// XXX bugnion pvc$jsr scloop, dest=1
-// XXX bugnion pvc$jsr scbcctl
-#endif /*SIMOS*/
- ret r31, (r10) // return to where we came from
-
-
-.end
-
-
-
-
diff --git a/system/alpha/palcode/platform_tlaser.S b/system/alpha/palcode/platform_tlaser.S
new file mode 100644
index 000000000..a807d065c
--- /dev/null
+++ b/system/alpha/palcode/platform_tlaser.S
@@ -0,0 +1,2821 @@
+// build_fixed_image: not sure what means
+// real_mm to be replaced during rewrite
+// remove_save_state remove_restore_state can be remooved to save space ??
+
+
+#define egore 0
+#define acore 0
+#define beh_model 0
+#define ev5_p2 1
+#define ev5_p1 0
+#define ldvpte_bug_fix 1
+#define spe_fix 0
+#define osf_chm_fix 0
+#define build_fixed_image 0
+#define enable_p4_fixups 0
+#define osf_svmin 1
+#define enable_physical_console 0
+#define fill_err_hack 0
+#define icflush_on_tbix 0
+#define max_cpuid 1
+#define perfmon_debug 0
+#define rax_mode 0
+
+#define hw_rei_spe hw_rei
+
+#include "ev5_defs.h"
+#include "ev5_impure.h"
+#include "ev5_alpha_defs.h"
+#include "ev5_paldef.h"
+#include "ev5_osfalpha_defs.h"
+#include "fromHudsonMacros.h"
+#include "fromHudsonOsf.h"
+#include "dc21164FromGasSources.h"
+#include "cserve.h"
+#include "tlaserreg.h"
+//#include "simos.h"
+
+
+#define ldlp ldl_p
+#define ldqp ldq_p
+
+#define stlp stl_p
+#define stqp stq_p
+#define stqpc stqp
+
+#ifdef SIMOS
+#define ldqpl ldq_p
+#define sdqpl sdq_p
+#else
+<--bomb>
+#endif
+
+#define pt_entInt pt_entint
+#define pt_entArith pt_entarith
+#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8)
+#define mchk_flag CNS_Q_FLAG
+#define mchk_sys_base 56
+#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
+#define mchk_offsets CNS_Q_EXC_ADDR
+#define mchk_mchk_code 8
+#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
+#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
+#define mchk_sc_addr CNS_Q_SC_ADDR
+#define mchk_sc_stat CNS_Q_SC_STAT
+#define mchk_ei_addr CNS_Q_EI_ADDR
+#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
+#define mchk_fill_syn CNS_Q_FILL_SYN
+#define mchk_ei_stat CNS_Q_EI_STAT
+#define mchk_exc_addr CNS_Q_EXC_ADDR
+#define mchk_ld_lock CNS_Q_LD_LOCK
+#define osfpcb_q_Ksp pcb_q_ksp
+#define pal_impure_common_size ((0x200 + 7) & 0xfff8)
+
+#define ALIGN_BLOCK \
+ .align 5
+
+#define ALIGN_BRANCH \
+ .align 3
+
+#define EXPORT(_x) \
+ .align 5; \
+ .globl _x; \
+_x:
+
+// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+// XXX the following is 'made up'
+// XXX bugnion
+
+// XXX bugnion not sure how to align 'quad'
+#define ALIGN_QUAD \
+ .align 3
+
+#define ALIGN_128 \
+ .align 7
+
+
+#define GET_IMPURE(_r) mfpr _r,pt_impure
+#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2)
+
+
+#define BIT(_x) (1<<(_x))
+
+
+// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+// XXX back to original code
+
+// .sbttl "System specific code - beh model version"
+
+//
+// Entry points
+// SYS$CFLUSH - Cache flush
+// SYS$CSERVE - Console service
+// SYS$WRIPIR - interprocessor interrupts
+// SYS$HALT_INTERRUPT - Halt interrupt
+// SYS$PASSIVE_RELEASE - Interrupt, passive release
+// SYS$INTERRUPT - Interrupt
+// SYS$RESET - Reset
+// SYS$ENTER_CONSOLE
+
+//
+// Macro to read TLINTRSUMx
+//
+// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
+//
+// Assumed register usage:
+// rsum TLINTRSUMx contents
+// raddr node space address
+// scratch scratch register
+
+
+// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2
+//
+// nop
+// mfpr 'scratch', pt_whami // Get our whami (VID)
+//
+// extbl 'scratch', #1, 'scratch' // shift down to bit 0
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// srl 'scratch', #1, 'rsum' // Shift off the cpu number
+//
+// sll 'rsum', #22, 'rsum' // Get our node offset
+// addq 'raddr', 'rsum', 'raddr' // Get our base node space address
+//
+// blbs 'scratch', label1
+// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
+//
+// br r31, label2
+//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
+//
+//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg
+//.endm
+
+#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \
+ nop; \
+ mfpr _scratch,pt_whami; \
+ extbl _scratch,1,_scratch; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ srl _scratch,1,_rsum; \
+ sll _rsum,22,_rsum; \
+ addq _raddr,_rsum,_raddr; \
+ blbs _scratch,1f; \
+ lda _raddr,0x1180(_raddr); \
+ br r31,2f; \
+1: \
+ lda _raddr,0x11c0(_raddr); \
+2: ldlp _rsum,0(_raddr)
+
+
+
+//
+// Macro to write TLINTRSUMx
+//
+// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
+//
+// Assumed register usage:
+// rsum TLINTRSUMx write data
+// raddr node space address
+// scratch scratch register
+
+// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2
+//
+// nop
+// mfpr 'whami', pt_whami // Get our whami (VID)
+//
+// extbl 'whami', #1, 'whami' // shift down to bit 0
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// blbs 'whami', label1
+//
+// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
+// br r31, label2
+//
+// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
+// label2: srl 'whami', #1, 'whami' // Shift off the cpu number
+//
+// sll 'whami', #22, 'whami' // Get our node offset
+// addq 'raddr', 'whami', 'raddr' // Get our base node space address
+//
+// mb
+// stqp 'rsum', 0('raddr') // write the right tlintrsum reg
+// mb
+// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum
+// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo
+// .endm
+
+
+#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \
+ nop; \
+ mfpr _whami,pt_whami; \
+ extbl _whami,1,_whami; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ blbs _whami,1f; \
+ lda _raddr,0x1180(_raddr);\
+ br zero,2f; \
+1: lda _raddr,0x11c0(_raddr);\
+2: srl _whami,1,_whami; \
+ addq _raddr,_whami,_raddr; \
+ mb; \
+ stqp _rsum,0(_raddr); \
+ ldqp _rsum,0(_raddr); \
+ bis _rsum,_rsum,_rsum
+
+
+//
+// Macro to determine highest priority TIOP Node ID from interrupt pending mask
+//
+// Assumed register usage:
+// rmask - TLINTRSUMx contents, shifted to isolate IOx bits
+// rid - TLSB Node ID of highest TIOP
+
+//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
+// srl 'rmask', #4, 'rid' // check IOP8
+// blbc 'rid', l1 // not IOP8
+//
+// lda 'rid', 8(r31) // IOP8
+// br r31, l6
+//
+// l1: srl 'rmask', #3, 'rid' // check IOP7
+// blbc 'rid', l2 // not IOP7
+//
+// lda 'rid', 7(r31) // IOP7
+// br r31, l6
+//
+// l2: srl 'rmask', #2, 'rid' // check IOP6
+// blbc 'rid', l3 // not IOP6
+//
+// lda 'rid', 6(r31) // IOP6
+// br r31, l6
+//
+// l3: srl 'rmask', #1, 'rid' // check IOP5
+// blbc 'rid', l4 // not IOP5
+//
+// lda 'rid', 5(r31) // IOP5
+// br r31, l6
+//
+// l4: srl 'rmask', #0, 'rid' // check IOP4
+// blbc 'rid', l5 // not IOP4
+//
+// lda r14, 4(r31) // IOP4
+// br r31, l6
+//
+// l5: lda r14, 0(r31) // passive release
+// l6:
+// .endm
+
+
+#define Intr_Find_TIOP(_rmask,_rid) \
+ srl _rmask,3,_rid; \
+ blbc _rid,1f; \
+ lda _rid,8(zero); \
+ br zero,6f; \
+1: srl _rmask,3,_rid; \
+ blbc _rid, 2f; \
+ lda _rid, 7(r31); \
+ br r31, 6f; \
+2: srl _rmask, 2, _rid; \
+ blbc _rid, 3f; \
+ lda _rid, 6(r31); \
+ br r31, 6f; \
+3: srl _rmask, 1, _rid; \
+ blbc _rid, 4f; \
+ lda _rid, 5(r31); \
+ br r31, 6f; \
+4: srl _rmask, 0, _rid; \
+ blbc _rid, 5f; \
+ lda r14, 4(r31); \
+ br r31, 6f; \
+5: lda r14, 0(r31); \
+6:
+
+
+
+
+//
+// Macro to calculate base node space address for given node id
+//
+// Assumed register usage:
+// rid - TLSB node id
+// raddr - base node space address
+
+//.macro Get_TLSB_Node_Address rid, raddr
+// sll 'rid', #22, 'rid' // Get offset of IOP node
+// lda 'raddr', ^xff88(r31) // Get base node space address bits
+//
+// sll 'raddr', #24, 'raddr' // Shift up to proper position
+// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address
+// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id
+//.endm
+
+
+#define turbo_pcia_intr_fix 0
+
+
+#if turbo_pcia_intr_fix != 0
+#define Get_TLSB_Node_Address(_rid,_raddr) \
+ sll _rid,22,_rid; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ addq _raddr,_rid,_raddr; \
+ srl _rid,22,_rid
+#else
+#define Get_TLSB_Node_Address(_rid,_raddr) \
+ sll _rid,22,_rid; \
+ lda _raddr,0xff88(zero); \
+ sll _raddr,24,_raddr; \
+ addq _raddr,_rid,_raddr
+#endif
+
+
+
+
+
+// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
+// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31)
+// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31)
+// or 'rs1', 'nodebase', 'rs1'
+// ldlp 'rs', 0('rs1')
+// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame
+// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame
+// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear
+// .endm
+
+
+// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
+// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
+// .endm
+
+#define CONCAT(_a,_b) _a ## _b
+
+#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog)
+
+
+#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
+
+
+// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
+// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
+// .endm
+
+#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
+
+#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
+
+#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
+ lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
+ or _rs1,_nodebase,_rs1; \
+ ldlp _rs1,0(_rs1); \
+ stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \
+ stlp _rs,0(_rs1)
+
+
+#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
+#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
+#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)
+
+
+
+
+// .macro save_pcia_intr irq
+// and r13, #^xf, r25 // isolate low 4 bits
+// addq r14, #4, r14 // format the TIOP Node id field
+// sll r14, #4, r14 // shift the TIOP Node id
+// or r14, r25, r10 // merge Node id/hose/HPC
+// mfpr r14, pt14 // get saved value
+// extbl r14, #'irq', r25 // confirm none outstanding
+// bne r25, sys$machine_check_while_in_pal
+// insbl r10, #'irq', r10 // align new info
+// or r14, r10, r14 // merge info
+// mtpr r14, pt14 // save it
+// bic r13, #^xf, r13 // clear low 4 bits of vector
+// .endm
+
+#define save_pcia_intr(_irq) \
+ and r13, 0xf, r25; \
+ addq r14, 4, r14; \
+ sll r14, 4, r14; \
+ or r14, r25, r10; \
+ mfpr r14, pt14; \
+ extbl r14, _irq, r25; \
+ bne r25, sys_machine_check_while_in_pal; \
+ insbl r10, _irq, r10; \
+ or r14, r10, r14; \
+ mtpr r14, pt14; \
+ bic r13, 0xf, r13
+
+
+
+ ALIGN_BLOCK
+
+// .sbttl "wripir - PALcode for wripir instruction"
+//orig SYS$WRIPIR: // R16 has the processor number.
+
+EXPORT(sys_wripir)
+
+//++
+// Convert the processor number to a CPU mask
+//--
+
+ and r16,0xf, r14 // mask the top stuff (16 CPUs supported)
+ bis r31,0x1,r16 // get a one
+ sll r16,r14,r14 // shift the bit to the right place
+
+//++
+// Build the Broadcast Space base address
+//--
+ lda r13,0xff8e(r31) // Load the upper address bits
+ sll r13,24,r13 // shift them to the top
+
+//++
+// Send out the IP Intr
+//--
+ stqp r14, 0x40(r13) // Write to TLIPINTR reg WAS TLSB_TLIPINTR_OFFSET
+ wmb // Push out the store
+
+ hw_rei
+
+
+ ALIGN_BLOCK
+// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
+//+
+// SYS$CFLUSH
+// Entry:
+//
+// R16 - contains the PFN of the page to be flushed
+//
+// Function:
+// Flush all Dstream caches of 1 entire page
+//
+//-
+
+EXPORT(sys_cflush)
+
+// #convert pfn to addr, and clean off <63:20>
+// #sll r16, <page_offset_size_bits>+<63-20>>, r12
+ sll r16, page_offset_size_bits+(63-20),r12
+
+// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
+// # stolen from srcmax code. XXX bugnion
+ lda r13, 0x10(r31) // assume 16Mbytes of cache
+ sll r13, 20, r13 // convert to bytes
+
+
+ srl r12, 63-20, r12 // shift back to normal position
+ xor r12, r13, r12 // xor addr<18>
+
+ or r31, 8192/(32*8), r13 // get count of loads
+ nop
+
+cflush_loop:
+ subq r13, 1, r13 // decr counter
+ mfpr r25, ev5__intid // Fetch level of interruptor
+
+ ldqp r31, 32*0(r12) // do a load
+ ldqp r31, 32*1(r12) // do next load
+
+ ldqp r31, 32*2(r12) // do next load
+ ldqp r31, 32*3(r12) // do next load
+
+ ldqp r31, 32*4(r12) // do next load
+ ldqp r31, 32*5(r12) // do next load
+
+ ldqp r31, 32*6(r12) // do next load
+ ldqp r31, 32*7(r12) // do next load
+
+ mfpr r14, ev5__ipl // Fetch current level
+ lda r12, (32*8)(r12) // skip to next cache block addr
+
+ cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl
+ beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???
+
+ bne r13, cflush_loop // loop till done
+ hw_rei // back to user
+
+ ALIGN_BRANCH
+1: // Here if interrupted
+ mfpr r12, exc_addr
+ subq r12, 4, r12 // Backup PC to point to CFLUSH
+
+ mtpr r12, exc_addr
+ nop
+
+ mfpr r31, pt0 // Pad exc_addr write
+ hw_rei
+
+
+ ALIGN_BLOCK
+// .sbttl "CSERVE- PALcode for CSERVE instruction"
+//+
+// SYS$CSERVE
+//
+// Function:
+// Various functions for private use of console software
+//
+// option selector in r0
+// arguments in r16....
+//
+//
+// r0 = 0 unknown
+//
+// r0 = 1 ldqp
+// r0 = 2 stqp
+// args, are as for normal STQP/LDQP in VMS PAL
+//
+// r0 = 3 dump_tb's
+// r16 = detination PA to dump tb's to.
+//
+// r0<0> = 1, success
+// r0<0> = 0, failure, or option not supported
+// r0<63:1> = (generally 0, but may be function dependent)
+// r0 - load data on ldqp
+//
+//-
+EXPORT(sys_cserve)
+
+#ifdef SIMOS
+ /* taken from scrmax */
+ cmpeq r18, CSERVE_K_RD_IMPURE, r0
+ bne r0, Sys_Cserve_Rd_Impure
+
+ cmpeq r18, CSERVE_K_JTOPAL, r0
+ bne r0, Sys_Cserve_Jtopal
+ call_pal 0
+
+ or r31, r31, r0
+ hw_rei // and back we go
+
+Sys_Cserve_Rd_Impure:
+ mfpr r0, pt_impure // Get base of impure scratch area.
+ hw_rei
+
+ ALIGN_BRANCH
+
+Sys_Cserve_Jtopal:
+ bic a0, 3, t8 // Clear out low 2 bits of address
+ bis t8, 1, t8 // Or in PAL mode bit
+ mtpr t8,exc_addr
+ hw_rei
+
+
+#else /* SIMOS */
+
+ cmpeq r16, cserve_ldlp, r12 // check for ldqp
+ bne r12, 1f // br if
+
+ cmpeq r16, cserve_stlp, r12 // check for stqp
+ bne r12, 2f // br if
+
+ cmpeq r16, cserve_callback, r12 // check for callback entry
+ bne r12, csrv_callback // br if
+
+ cmpeq r16, cserve_identify, r12 // check for callback entry
+ bne r12, csrv_identify // br if
+
+ or r31, r31, r0 // set failure
+ nop // pad palshadow write
+
+ hw_rei // and back we go
+#endif /* SIMOS */
+
+// ldqp
+ ALIGN_QUAD
+1:
+ ldqp r0,0(r17) // get the data
+ nop // pad palshadow write
+
+ hw_rei // and back we go
+
+
+// stqp
+ ALIGN_QUAD
+2:
+ stqp r18, 0(r17) // store the data
+#ifdef SIMOS
+ lda r0,17(r31) // bogus
+#else
+ lda r0, CSERVE_SUCCESS(r31) // set success
+#endif
+ hw_rei // and back we go
+
+
+ ALIGN_QUAD
+csrv_callback:
+ ldq r16, 0(r17) // restore r16
+ ldq r17, 8(r17) // restore r17
+ lda r0, hlt_c_callback(r31)
+ br r31, sys_enter_console
+
+
+csrv_identify:
+ mfpr r0, pal_base
+ ldqp r0, 8(r0)
+ hw_rei
+
+
+// dump tb's
+ ALIGN_QUAD
+0:
+ // DTB PTEs - 64 entries
+ addq r31, 64, r0 // initialize loop counter
+ nop
+
+1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp
+ mfpr r12, ev5__dtb_pte // read out next pte to reg file
+
+ subq r0, 1, r0 // decrement loop counter
+ nop // Pad - no Mbox instr in cycle after mfpr
+
+ stqp r12, 0(r16) // store out PTE
+ addq r16, 8 ,r16 // increment pointer
+
+ bne r0, 1b
+
+ ALIGN_BRANCH
+ // ITB PTEs - 48 entries
+ addq r31, 48, r0 // initialize loop counter
+ nop
+
+2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp
+ mfpr r12, ev5__itb_pte // read out next pte to reg file
+
+ subq r0, 1, r0 // decrement loop counter
+ nop //
+
+ stqp r12, 0(r16) // store out PTE
+ addq r16, 8 ,r16 // increment pointer
+
+ bne r0, 2b
+ or r31, 1, r0 // set success
+
+ hw_rei // and back we go
+
+
+// .sbttl "SYS$INTERRUPT - Interrupt processing code"
+
+//+
+// SYS$INTERRUPT
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12, r14 - available
+// r13 - INTID (new EV5 IPL)
+// r25 - ISR
+// r16, r17, r18 - available
+//
+//-
+
+
+EXPORT(sys_interrupt)
+ cmpeq r13, 31, r12
+ bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)
+
+ cmpeq r13, 30, r12
+ bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail)
+
+ cmpeq r13, 29, r12
+ bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters)
+
+ cmpeq r13, 23, r12
+ bne r12, sys_int_23 // Check for level 23 interrupt
+
+ cmpeq r13, 22, r12
+ bne r12, sys_int_22 // Check for level 22 interrupt (might be
+ // interprocessor or timer interrupt)
+
+ cmpeq r13, 21, r12
+ bne r12, sys_int_21 // Check for level 21 interrupt
+
+ cmpeq r13, 20, r12
+ bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected
+ // system error interrupt)
+
+ mfpr r14, exc_addr // ooops, something is wrong
+ br r31, pal_pal_bug_check_from_int
+
+
+
+
+//+
+//sys$int_2*
+// Routines to handle device interrupts at IPL 23-20.
+// System specific method to ack/clear the interrupt, detect passive release,
+// detect interprocessor (22), interval clock (22), corrected
+// system error (20)
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12, r14 - available
+// r13 - INTID (new EV5 IPL)
+// r25 - ISR
+//
+// On exit:
+// Interrupt has been ack'd/cleared
+// a0/r16 - signals IO device interrupt
+// a1/r17 - contains interrupt vector
+// exit to ent_int address
+//
+//-
+ ALIGN_BRANCH
+sys_int_23:
+ Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
+ srl r13, 22, r13 // shift down to examine IPL17
+
+ Intr_Find_TIOP(r13,r14)
+ beq r14, 1f
+
+ Get_TLSB_Node_Address(r14,r10)
+ lda r10, 0xac0(r10) // Get base TLILID address
+
+ ldlp r13, 0(r10) // Read the TLILID register
+ bne r13, pal_post_dev_interrupt
+
+1: lda r16, osfint_c_passrel(r31) // passive release
+ br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+sys_int_22:
+ Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
+ srl r13, 6, r14 // check the Intim bit
+
+ blbs r14, tlep_intim // go service Intim
+ srl r13, 5, r14 // check the IP Int bit
+
+ blbs r14, tlep_ipint // go service IP Int
+ srl r13, 17, r13 // shift down to examine IPL16
+
+ Intr_Find_TIOP(r13,r14)
+ beq r14, 1f
+
+ Get_TLSB_Node_Address(r14,r10)
+ lda r10, 0xa80(r10) // Get base TLILID address
+
+ ldlp r13, 0(r10) // Read the TLILID register
+#if turbo_pcia_intr_fix == 0
+// .if eq turbo_pcia_intr_fix
+ bne r13, pal_post_dev_interrupt
+//orig .iff
+ beq r13, 1f
+
+ and r13, 0x3, r10 // check for PCIA bits
+ beq r10, pal_post_dev_interrupt // done if nothing set
+ save_pcia_intr(2)
+ br r31, pal_post_dev_interrupt //
+// .endc
+#endif /* turbo_pcia_intr_fix == 0 */
+
+1: lda r16, osfint_c_passrel(r31) // passive release
+ br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+sys_int_21:
+ Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
+ srl r13, 12, r13 // shift down to examine IPL15
+
+ Intr_Find_TIOP(r13,r14)
+ beq r14, 1f
+
+ Get_TLSB_Node_Address(r14,r10)
+ lda r10, 0xa40(r10) // Get base TLILID address
+
+ ldlp r13, 0(r10) // Read the TLILID register
+#if turbo_pcia_intr_fix == 0
+//orig .if eq turbo_pcia_intr_fix
+ bne r13, pal_post_dev_interrupt
+//orig .iff
+ beq r13, 1f
+
+ and r13, 0x3, r10 // check for PCIA bits
+ beq r10, pal_post_dev_interrupt // done if nothing set
+ save_pcia_intr(1)
+ br r31, pal_post_dev_interrupt //
+// orig .endc
+#endif /* turbo_pcia_intr_fix == 0 */
+
+1: lda r16, osfint_c_passrel(r31) // passive release
+ br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+sys_int_20:
+ lda r13, 1(r31) // Duart0 bit
+ Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
+
+ Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
+ blbs r13, tlep_uart0 // go service UART int
+
+ srl r13, 7, r13 // shift down to examine IPL14
+ Intr_Find_TIOP(r13,r14)
+
+ beq r14, tlep_ecc // Branch if not IPL14
+ Get_TLSB_Node_Address(r14,r10)
+
+ lda r10, tlsb_tlilid0_offset(r10) // Get base TLILID address
+ ldlp r13, 0(r10) // Read the TLILID register
+
+#if turbo_pcia_intr_fix == 0
+// orig .if eq turbo_pcia_intr_fix
+ bne r13, pal_post_dev_interrupt
+// orig .iff
+ beq r13, 1f
+
+ and r13, 0x3, r10 // check for PCIA bits
+ beq r10, pal_post_dev_interrupt // done if nothing set
+ save_pcia_intr(0)
+ br r31, pal_post_dev_interrupt //
+// orig .endc
+#endif
+1: lda r16, osfint_c_passrel(r31) // passive release
+ br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+tlep_intim:
+ lda r13, 0xffb(r31) // get upper GBUS address bits
+ sll r13, 28, r13 // shift up to top
+
+ lda r13, (tlep_watch_csrc_offset)(r13) // full CSRC address
+ ldqp r13, 0(r13) // read CSRC
+
+ lda r13, 0x40(r31) // load Intim bit
+ Write_TLINTRSUMx(r13,r10,r14) // clear the Intim bit
+
+ lda r16, osfint_c_clk(r31) // passive release
+ br r31, pal_post_interrupt // Build the stack frame
+
+
+ ALIGN_BRANCH
+tlep_ipint:
+ lda r13, 0x20(r31) // load IP Int bit
+ Write_TLINTRSUMx(r13,r10,r14) // clear the IP Int bit
+
+ lda r16, osfint_c_ip(r31) // passive release
+ br r31, pal_post_interrupt // Build the stack frame
+
+
+ ALIGN_BRANCH
+tlep_uart0:
+ lda r13, 0xffa(r31) // get upper GBUS address bits
+ sll r13, 28, r13 // shift up to top
+
+ ldlp r14, 0x80(r13) // zero pointer register
+ lda r14, 3(r31) // index to RR3
+
+ stlp r14, 0x80(r13) // write pointer register
+ mb
+
+ mb
+ ldlp r14, 0x80(r13) // read RR3
+
+ srl r14, 5, r10 // is it Channel A RX?
+ blbs r10, uart0_rx
+
+ srl r14, 4, r10 // is it Channel A TX?
+ blbs r10, uart0_tx
+
+ srl r14, 2, r10 // is it Channel B RX?
+ blbs r10, uart1_rx
+
+ srl r14, 1, r10 // is it Channel B TX?
+ blbs r10, uart1_tx
+
+ lda r8, 0(r31) // passive release
+ br r31, clear_duart0_int // clear tlintrsum and post
+
+
+ ALIGN_BRANCH
+uart0_rx:
+ lda r8, 0x680(r31) // UART0 RX vector
+ br r31, clear_duart0_int // clear tlintrsum and post
+
+
+ ALIGN_BRANCH
+uart0_tx:
+ lda r14, 0x28(r31) // Reset TX Int Pending code
+ mb
+ stlp r14, 0x80(r13) // write Channel A WR0
+ mb
+
+ lda r8, 0x6c0(r31) // UART0 TX vector
+ br r31, clear_duart0_int // clear tlintrsum and post
+
+
+ ALIGN_BRANCH
+uart1_rx:
+ lda r8, 0x690(r31) // UART1 RX vector
+ br r31, clear_duart0_int // clear tlintrsum and post
+
+
+ ALIGN_BRANCH
+uart1_tx:
+ lda r14, 0x28(r31) // Reset TX Int Pending code
+ stlp r14, 0(r13) // write Channel B WR0
+
+ lda r8, 0x6d0(r31) // UART1 TX vector
+ br r31, clear_duart0_int // clear tlintrsum and post
+
+
+ ALIGN_BRANCH
+clear_duart0_int:
+ lda r13, 1(r31) // load duart0 bit
+ Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
+
+ beq r8, 1f
+ or r8, r31, r13 // move vector to r13
+ br r31, pal_post_dev_interrupt // Build the stack frame
+1: nop
+ nop
+ hw_rei
+// lda r16, osfint_c_passrel(r31) // passive release
+// br r31, pal_post_interrupt //
+
+
+ ALIGN_BRANCH
+tlep_ecc:
+ mfpr r14, pt_whami // get our node id
+ extbl r14, 1, r14 // shift to bit 0
+
+ srl r14, 1, r14 // shift off cpu number
+ Get_TLSB_Node_Address(r14,r10) // compute our nodespace address
+
+ ldlp r13, 0x40(r10) // read our TLBER WAS tlsb_tlber_offset
+ srl r13, 17, r13 // shift down the CWDE/CRDE bits
+
+ and r13, 3, r13 // mask the CWDE/CRDE bits
+ beq r13, 1f
+
+ ornot r31, r31, r12 // set flag
+ lda r9, mchk_c_sys_ecc(r31) // System Correctable error MCHK code
+ br r31, sys_merge_sys_corr // jump to CRD logout frame code
+
+1: lda r16, osfint_c_passrel(r31) // passive release
+
+
+ ALIGN_BRANCH
+
+pal_post_dev_interrupt:
+ or r13, r31, r17 // move vector to a1
+ or r31, osfint_c_dev, r16 // a0 signals IO device interrupt
+
+pal_post_interrupt:
+ mfpr r12, pt_entint
+
+ mtpr r12, exc_addr
+
+ nop
+ nop
+
+ hw_rei_spe
+
+
+
+//+
+// sys_passive_release
+// Just pretend the interrupt never occurred.
+//-
+
+EXPORT(sys_passive_release)
+ mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps
+ nop
+
+ mfpr r31, pt0 // Pad write to dtb_cm
+ hw_rei
+
+//+
+//sys_int_powerfail
+// A powerfail interrupt has been detected. The stack has been pushed.
+// IPL and PS are updated as well.
+//
+// I'm not sure what to do here, I'm treating it as an IO device interrupt
+//
+//-
+
+ ALIGN_BLOCK
+sys_int_powerfail:
+ lda r12, 0xffc4(r31) // get GBUS_MISCR address bits
+ sll r12, 24, r12 // shift to proper position
+ ldqp r12, 0(r12) // read GBUS_MISCR
+ srl r12, 5, r12 // isolate bit <5>
+ blbc r12, 1f // if clear, no missed mchk
+
+ // Missed a CFAIL mchk
+ lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits
+ sll r13, 24, r13 // shift to proper position
+ lda r14, 0x40(r31) // get bit <6> mask
+ ldqp r12, 0(r13) // read GBUS$SERNUM
+ or r12, r14, r14 // set bit <6>
+ stqp r14, 0(r13) // clear GBUS$SERNUM<6>
+ mb
+ mb
+
+1: br r31, sys_int_mchk // do a machine check
+
+ lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector
+ mfpr r25, pt_entint
+
+ lda r16, osfint_c_dev(r31) // a0 to device code
+ mtpr r25, exc_addr
+
+ nop // pad exc_addr write
+ nop
+
+ hw_rei_spe
+
+//+
+// sys$halt_interrupt
+// A halt interrupt has been detected. Pass control to the console.
+//
+//
+//-
+ EXPORT(sys_halt_interrupt)
+
+ ldah r13, 0x1800(r31) // load Halt/^PHalt bits
+ Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits
+
+ mtpr r11, dtb_cm // Restore Mbox current mode
+ nop
+ nop
+ mtpr r0, pt0
+#ifndef SIMOS
+ pvc_jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt
+ br r31, sys_enter_console // enter the console
+
+
+
+//+
+// sys$int_mchk_or_crd
+//
+// Current state:
+// Stack is pushed
+// ps, sp and gp are updated
+// r12
+// r13 - INTID (new EV5 IPL)
+// r14 - exc_addr
+// r25 - ISR
+// r16, r17, r18 - available
+//
+//-
+ ALIGN_BLOCK
+
+sys_int_mchk_or_crd:
+ srl r25, isr_v_mck, r12
+ blbs r12, sys_int_mchk
+ //+
+ // Not a Machine check interrupt, so must be an Internal CRD interrupt
+ //-
+
+ mb //Clear out Cbox prior to reading IPRs
+ srl r25, isr_v_crd, r13 //Check for CRD
+ blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!!
+
+ lda r9, 1(r31)
+ sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd
+ mtpr r9, ev5__hwint_clr // ack the crd interrupt
+
+ or r31, r31, r12 // clear flag
+ lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code
+
+sys_merge_sys_corr:
+ ldah r14, 0xfff0(r31)
+ mtpr r0, pt0 // save r0 for scratch
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r1, pt1 // save r0 for scratch
+
+ ldqp r0, ei_addr(r14) // EI_ADDR IPR
+ ldqp r10, fill_syn(r14) // FILL_SYN IPR
+ bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub
+
+ blbs r12, 1f // no scrubbing for IRQ0 case
+// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1
+ bsr r13, sys_crd_scrub_mem // and go scrub
+
+ // ld/st pair in scrub routine will have finished due
+ // to ibox stall of stx_c. Don't need another mb.
+ ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ or r8, r31, r12 // Must only be executed once in this flow, and must
+ br r31, 2f // be after the scrub routine.
+
+1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ // For IRQ0 CRD case only - meaningless data.
+
+2: mfpr r13, pt_mces // Get MCES
+ srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES
+ blbc r14, 6f // branch if 630
+ srl r13, mces_v_dsc, r14 // check if 620 reporting disabled
+ blbc r14, 5f // branch if enabled
+ or r13, r31, r14 // don't set SCE if disabled
+ br r31, 8f // continue
+5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit
+ br r31, 8f
+
+6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled
+ blbc r14, 7f // branch if enabled
+ or r13, r31, r14 // don't set PCE if disabled
+ br r31, 8f // continue
+7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit
+
+ // Setup SCB if dpc is not set
+8: mtpr r14, pt_mces // Store updated MCES
+ srl r13, mces_v_sce, r1 // Get SCE
+ srl r13, mces_v_pce, r14 // Get PCE
+ or r1, r14, r1 // SCE OR PCE, since they share
+ // the CRD logout frame
+ // Get base of the logout area.
+ GET_IMPURE(r14) // addr of per-cpu impure area
+ GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)
+
+ blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame
+
+ // Set the 2nd error flag in the logout area:
+
+ lda r1, 3(r31) // Set retry and 2nd error flags
+ sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword
+ stlp r1, mchk_crd_flag+4(r14) // store flag longword
+ br sys_crd_ack
+
+sys_crd_write_logout_frame:
+ // should only be here if neither the pce or sce bits are set
+
+ //+
+ // Write the mchk code to the logout area
+ //-
+ stqp r9, mchk_crd_mchk_code(r14)
+
+
+ //+
+ // Write the first 2 quadwords of the logout area:
+ //-
+ lda r1, 1(r31) // Set retry flag
+ sll r1, 63, r9 // Move retry flag to bit 63
+ lda r1, mchk_crd_size(r9) // Combine retry flag and frame size
+ stqp r1, mchk_crd_flag(r14) // store flag/frame size
+
+#ifndef SIMOS
+ /* needed? bugnion */
+ lda r1, mchk_crd_sys_base(r31) // sys offset
+ sll r1, 32, r1
+ lda r1, mchk_crd_cpu_base(r1) // cpu offset
+ stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame
+
+#endif
+ //+
+ // Write error IPRs already fetched to the logout area
+ //-
+ stqp r0, mchk_crd_ei_addr(r14)
+ stqp r10, mchk_crd_fill_syn(r14)
+ stqp r8, mchk_crd_ei_stat(r14)
+ stqp r25, mchk_crd_isr(r14)
+ //+
+ // Log system specific info here
+ //-
+crd_storeTLEP_:
+ lda r1, 0xffc4(r31) // Get GBUS$MISCR address
+ sll r1, 24, r1
+ ldqp r1, 0(r1) // Read GBUS$MISCR
+ sll r1, 16, r1 // shift up to proper field
+ mfpr r10, pt_whami // get our node id
+ extbl r10, 1, r10 // shift to bit 0
+ or r1, r10, r1 // merge MISCR and WHAMI
+ stlp r1, mchk_crd_whami(r14) // write to crd logout area
+ srl r10, 1, r10 // shift off cpu number
+
+ Get_TLSB_Node_Address(r10,r0) // compute our nodespace address
+
+ OSFcrd_TLEPstore_tlsb(tldev)
+ OSFcrd_TLEPstore_tlsb_clr(tlber)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr0)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr1)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr2)
+ OSFcrd_TLEPstore_tlsb_clr(tlesr3)
+
+sys_crd_ack:
+ mfpr r0, pt0 // restore r0
+ mfpr r1, pt1 // restore r1
+
+ srl r12, ei_stat_v_ei_es, r12
+ blbc r12, 5f
+ srl r13, mces_v_dsc, r10 // logging enabled?
+ br r31, 6f
+5: srl r13, mces_v_dpc, r10 // logging enabled?
+6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it
+
+ // logging not enabled --
+ // Get base of the logout area.
+ GET_IMPURE(r13) // addr of per-cpu impure area
+ GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
+ ldlp r10, mchk_crd_rsvd(r13) // bump counter
+ addl r10, 1, r10
+ stlp r10, mchk_crd_rsvd(r13)
+ mb
+ br r31, sys_crd_dismiss_interrupt // just return
+
+ //+
+ // The stack is pushed. Load up a0,a1,a2 and vector via entInt
+ //
+ //-
+
+ ALIGN_BRANCH
+sys_crd_post_interrupt:
+ lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
+ lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector
+
+ blbc r12, 1f
+ lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector
+
+1: subq r31, 1, r18 // get a -1
+ mfpr r25, pt_entInt
+
+ srl r18, 42, r18 // shift off low bits of kseg addr
+ mtpr r25, exc_addr // load interrupt vector
+
+ sll r18, 42, r18 // shift back into position
+ or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+
+ hw_rei_spe // done
+
+
+ //+
+ // The stack is pushed. Need to back out of it all.
+ //-
+
+sys_crd_dismiss_interrupt:
+ br r31, Call_Pal_Rti
+
+
+// .sbttl sys_crd_scrub_mem
+
+ //+
+ //
+ // sys_crd_scrub_mem
+ // called
+ // jsr r13, sys$crd_scrub_mem
+ // r0 = addr of cache block
+ //
+ //-
+
+
+
+ ALIGN_BLOCK // align for branch target
+sys_crd_scrub_mem:
+ // now find error in memory, and attempt to scrub that cache block
+ // This routine just scrubs the failing octaword
+ // Only need to "touch" one quadword per octaword to accomplish the scrub
+ srl r0, 39, r8 // get high bit of bad pa
+ blbs r8, 1f // don't attempt fixup on IO space addrs
+ nop // needed to align the ldqpl to octaword boundary
+ nop // "
+
+ ldqpl r8, 0(r0) // attempt to read the bad memory
+ // location
+ // (Note bits 63:40,3:0 of ei_addr
+ // are set to 1, but as long as
+ // we are doing a phys ref, should
+ // be ok)
+ nop // Needed to keep the Ibox from swapping the ldqpl into E1
+
+ stqpc r8, 0(r0) // Store it back if it is still there.
+ // If store fails, location already
+ // scrubbed by someone else
+
+ nop // needed to align the ldqpl to octaword boundary
+
+ lda r8, 0x20(r31) // flip bit 5 to touch next hexaword
+ xor r8, r0, r0
+ nop // needed to align the ldqpl to octaword boundary
+ nop // "
+
+ ldqpl r8, 0(r0) // attempt to read the bad memory
+ // location
+ // (Note bits 63:40,3:0 of ei_addr
+ // are set to 1, but as long as
+ // we are doing a phys ref, should
+ // be ok)
+ nop // Needed to keep the Ibox from swapping the ldqpl into E1
+
+ stqpc r8, 0(r0) // Store it back if it is still there.
+ // If store fails, location already
+ // scrubbed by someone else
+
+ lda r8, 0x20(r31) // restore r0 to original address
+ xor r8, r0, r0
+
+ //at this point, ei_stat could be locked due to a new corr error on the ld,
+ //so read ei_stat to unlock AFTER this routine.
+
+// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1
+1: ret r31, (r13) // and back we go
+
+
+// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
+//+
+// Machine check interrupt from the system. Setup and join the
+// regular machine check flow.
+// On exit:
+// pt0 - saved r0
+// pt1 - saved r1
+// pt4 - saved r4
+// pt5 - saved r5
+// pt6 - saved r6
+// pt10 - saved exc_addr
+// pt_misc<47:32> - mchk code
+// pt_misc<31:16> - scb vector
+// r14 - base of Cbox IPRs in IO space
+// MCES<mchk> is set
+//-
+ ALIGN_BLOCK
+sys_int_mchk:
+ lda r14, mchk_c_sys_hrd_error(r31)
+ mfpr r12, exc_addr
+
+ addq r14, 1, r14 // Flag as interrupt
+ nop
+
+ sll r14, 32, r14 // Move mchk code to position
+ mtpr r12, pt10 // Stash exc_addr
+
+ mfpr r12, pt_misc // Get MCES and scratch
+ mtpr r0, pt0 // Stash for scratch
+
+ zap r12, 0x3c, r12 // Clear scratch
+ blbs r12, sys_double_machine_check // MCHK halt if double machine check
+
+ or r12, r14, r12 // Combine mchk code
+ lda r14, scb_v_sysmchk(r31) // Get SCB vector
+
+ sll r14, 16, r14 // Move SCBv to position
+ or r12, r14, r14 // Combine SCBv
+
+ bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
+ mtpr r14, pt_misc // Save mchk code!scbv!whami!mces
+
+ ldah r14, 0xfff0(r31)
+ mtpr r1, pt1 // Stash for scratch
+
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r4, pt4
+
+ mtpr r5, pt5
+
+#if beh_model
+// .if ne beh_model
+ ldah r25, 0xC000(r31) // Get base of demon space
+ lda r25, 0x340(r25) // Add interrupt demon offset
+
+ ldqp r13, 0(r25) // Read the control register
+ nop
+
+ and r13, 0x10, r8 // For debug, check that the interrupt is expected
+ beq r8, interrupt_not_expected
+
+ bic r13, 0x10, r13
+ stqp r13, 0(r25) // Ack and clear the interrupt
+// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow
+ .endc
+#endif
+
+ mtpr r6, pt6
+ br r31, sys_mchk_collect_iprs // Join common machine check flow
+
+
+// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code"
+//+
+//sys$int_perf_cnt
+//
+// A performance counter interrupt has been detected. The stack has been pushed.
+// IPL and PS are updated as well.
+//
+// on exit to interrupt entry point ENTINT::
+// a0 = osfint$c_perf
+// a1 = scb$v_perfmon (650)
+// a2 = 0 if performance counter 0 fired
+// a2 = 1 if performance counter 1 fired
+// a2 = 2 if performance counter 2 fired
+// (if more than one counter overflowed, an interrupt will be
+// generated for each counter that overflows)
+//
+//
+//-
+ ALIGN_BLOCK
+sys_int_perf_cnt: // Performance counter interrupt
+ lda r17, scb_v_perfmon(r31) // a1 to interrupt vector
+ mfpr r25, pt_entint
+
+ lda r16, osfint_c_perf(r31) // a0 to perf counter code
+ mtpr r25, exc_addr
+
+ //isolate which perf ctr fired, load code in a2, and ack
+ mfpr r25, isr
+ or r31, r31, r18 // assume interrupt was pc0
+
+ srl r25, isr_v_pc1, r25 // isolate
+ cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14
+
+ srl r25, 1, r25 // get pc2
+ cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14
+
+ lda r25, 1(r31) // get a one
+ sll r25, r18, r25
+
+ sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt
+ mtpr r25, hwint_clr
+
+ hw_rei_spe
+
+
+
+ ALIGN_BLOCK
+// .sbttl "System specific RESET code"
+//+
+// RESET code
+// On entry:
+// r1 = pal_base +8
+//
+// Entry state on trap:
+// r0 = whami
+// r2 = base of scratch area
+// r3 = halt code
+// and the following 3 if init_cbox is enabled:
+// r5 = sc_ctl
+// r6 = bc_ctl
+// r7 = bc_cnfg
+//
+// Entry state on switch:
+// r17 - new PC
+// r18 - new PCBB
+// r19 - new VPTB
+//
+//-
+
+#if rax_mode==0
+ .globl sys_reset
+sys_reset:
+// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load
+ mtpr r31, itb_ia // clear the ITB
+ mtpr r31, dtb_ia // clear the DTB
+
+ lda r1, -8(r1) // point to start of code
+ mtpr r1, pal_base // initialize PAL_BASE
+
+ // Interrupts
+ mtpr r31, astrr // stop ASTs
+ mtpr r31, aster // stop ASTs
+ mtpr r31, sirr // clear software interrupts
+
+ mtpr r0, pt1 // r0 is whami (unless we entered via swp)
+
+//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
+ ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
+
+#if disable_crd == 0
+// .if eq disable_crd
+ bis r31, 1, r0
+ sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable>
+ or r0, r1, r1 // Set the bit
+#endif
+
+ mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable,
+ // super page enabled, correct read per assembly option
+
+ // Mbox/Dcache init
+//orig lda r1, <1@<mcsr$v_sp1>>(r31)
+ lda r1,BIT(mcsr_v_sp1)(zero)
+
+ mtpr r1, mcsr // MCSR - Super page enabled
+ lda r1, BIT(dc_mode_v_dc_ena)(r31)
+ ALIGN_BRANCH
+// mtpr r1, dc_mode // turn Dcache on
+ nop
+
+ mfpr r31, pt0 // No Mbox instr in 1,2,3,4
+ mfpr r31, pt0
+ mfpr r31, pt0
+ mfpr r31, pt0
+ mtpr r31, dc_flush // flush Dcache
+
+ // build PS (IPL=7,CM=K,VMM=0,SW=0)
+ lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7
+ lda r1, 0x1F(r31)
+ mtpr r1, ipl // set internal <ipl>=1F
+ mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy
+ mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy
+
+ // Create the PALtemp pt_intmask -
+ // MAP:
+ // OSF IPL EV5 internal IPL(hex) note
+ // 0 0
+ // 1 1
+ // 2 2
+ // 3 14 device
+ // 4 15 device
+ // 5 16 device
+ // 6 1E device,performance counter, powerfail
+ // 7 1F
+ //
+
+ ldah r1, 0x1f1E(r31) // Create upper lw of int_mask
+ lda r1, 0x1615(r1)
+
+ sll r1, 32, r1
+ ldah r1, 0x1402(r1) // Create lower lw of int_mask
+
+ lda r1, 0x0100(r1)
+ mtpr r1, pt_intmask // Stash in PALtemp
+
+ // Unlock a bunch of chip internal IPRs
+ mtpr r31, exc_sum // clear out exeception summary and exc_mask
+ mfpr r31, va // unlock va, mmstat
+//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
+ lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
+
+ mtpr r8, icperr_stat // Clear Icache parity error & timeout status
+//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
+ lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
+
+ mtpr r8, dcperr_stat // Clear Dcache parity error status
+
+ rc r0 // clear intr_flag
+ mtpr r31, pt_trap
+
+ mfpr r0, pt_misc
+ srl r0, pt_misc_v_switch, r1
+ blbs r1, sys_reset_switch // see if we got here from swppal
+
+ // Rest of the "real" reset flow
+ // ASN
+ mtpr r31, dtb_asn
+ mtpr r31, itb_asn
+
+ lda r1, 0x67(r31)
+ sll r1, hwint_clr_v_pc0c, r1
+ mtpr r1, hwint_clr // Clear hardware interrupt requests
+
+ lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
+ mfpr r0, pt1 // get whami
+ insbl r0, 1, r0 // isolate whami in correct pt_misc position
+ or r0, r1, r1 // combine whami and mces
+ mtpr r1, pt_misc // store whami and mces, swap bit clear
+
+ zapnot r3, 1, r0 // isolate halt code
+ mtpr r0, pt0 // save entry type
+
+ // Cycle counter
+ or r31, 1, r9 // get a one
+ sll r9, 32, r9 // shift to <32>
+ mtpr r31, cc // clear Cycle Counter
+ mtpr r9, cc_ctl // clear and enable the Cycle Counter
+ mtpr r31, pt_scc // clear System Cycle Counter
+
+
+ // Misc PALtemps
+ mtpr r31, maf_mode // no mbox instructions for 3 cycles
+ or r31, 1, r1 // get bogus scbb value
+ mtpr r1, pt_scbb // load scbb
+ mtpr r31, pt_prbr // clear out prbr
+#ifdef SIMOS
+// or zero,kludge_initial_pcbb,r1
+ GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
+#else
+ mfpr r1, pal_base
+//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
+ GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
+#endif
+ mtpr r1, pt_pcbb // load pcbb
+ lda r1, 2(r31) // get a two
+ sll r1, 32, r1 // gen up upper bits
+ mtpr r1, mvptbr
+ mtpr r1, ivptbr
+ mtpr r31, pt_ptbr
+ // Performance counters
+ mtpr r31, pmctr
+
+#if init_cbox != 0
+// .if ne init_cbox
+ // Only init the Scache and the Bcache if there have been no previous
+ // cacheable dstream loads or stores.
+ //
+ // Inputs:
+ // r5 - sc_ctl
+ // r6 - bc_ctl
+ // r7 - bc_cnfg
+
+ ldah r0, 0xfff0(r31)
+ zap r0, 0xE0, r0 // Get Cbox IPR base
+ ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
+temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
+ lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
+ sll r20, 1, r20
+temp = 0x017441 // default bc_config
+ get_addr r21, temp, r31 // create default bc_config
+ lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
+
+// XXX bugnion pvc$jsr scbcctl, bsr=1
+ bsr r10, set_sc_bc_ctl
+ update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
+ store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area
+// .endc
+#endif
+ // Clear pmctr_ctl in impure area
+
+#ifndef SIMOS
+ // can't assemble ???
+ update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed
+#endif
+
+ ldah r14, 0xfff0(r31)
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+#ifndef SIMOS
+ ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr
+ ldqp r31, ei_stat(r14)
+ ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
+#endif
+ GET_IMPURE(r13)
+ stqpc r31, 0(r13) // Clear lock_flag
+
+ mfpr r0, pt0 // get entry type
+ br r31, sys_enter_console // enter the cosole
+
+#endif /* rax_mode == 0 */
+
+
+
+
+//.if ne rax_mode
+#if rax_mode != 0
+
+ // For RAX:
+ // r0 - icsr at first, then used for cbox ipr base offset
+ // r2 - mcsr
+ // r3 - dc_mode
+ // r4 - maf_mode
+ // r5 - sc_ctl
+ // r6 - bc_ctl
+ // r7 - bc_cnfg
+ .globl sys_reset
+sys_reset:
+ mtpr r31, ev5__dtb_cm // set mbox mode to kernel
+ mtpr r31, ev5__ps // set Ibox mode to kernel - E1
+
+ mtpr r0, ev5__icsr // Load ICSR - E1
+
+ mtpr r2, ev5__mcsr
+ mfpr r8, pal_base
+
+ ldah r0, 0xfff0(r31)
+ zap r0, 0xE0, r0 // Get Cbox IPR base
+
+ mtpr r31, ev5__itb_asn // clear asn - E1
+ ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
+
+temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
+ lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
+ sll r20, 1, r20
+
+temp = 0x017441 // default bc_config
+ get_addr r21, temp, r31 // create default bc_config
+ lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
+
+// XXX bugnion pvc$jsr scbcctl, bsr=1
+ bsr r10, set_sc_bc_ctl
+ update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2
+ store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl
+ store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow
+
+ mtpr r3, ev5__dc_mode // write dc_mode
+ mtpr r31, ev5__dc_flush // flush dcache
+
+ mtpr r31, ev5__exc_sum // clear exc_sum - E1
+ mtpr r31, ev5__exc_mask // clear exc_mask - E1
+
+ ldah r2, 4(r31) // For EXC_ADDR
+ mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex)
+
+ mtpr r31, ev5__sirr // Clear SW interrupts (for ISP)
+ mtpr r4, ev5__maf_mode // write maf_mode
+
+ mtpr r31, ev5__alt_mode // set alt_mode to kernel
+ mtpr r31, ev5__itb_ia // clear ITB - E1
+
+ lda r1, 0x1F(r31) // For IPL
+ mtpr r1, ev5__ipl // IPL to 1F
+
+ mtpr r31, ev5__hwint_clr // clear hardware interrupts
+ mtpr r31, ev5__aster // disable AST interrupts
+
+ mtpr r31, ev5__astrr // clear AST requests
+ mtpr r31, ev5__dtb_ia // clear dtb
+
+ nop
+ mtpr r31, pt_trap
+
+ srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000
+ sll r9, 32, r9
+
+ lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set
+ nop
+
+ mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000
+ mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000
+
+ mtpr r2, dtb_tag
+ mtpr r9, itb_pte
+
+ and r31, r31, r0 // clear deposited registers, note: r2 already overwritten
+ and r31, r31, r3
+
+ and r31, r31, r4
+ and r31, r31, r5
+
+ and r31, r31, r6
+ and r31, r31, r7
+
+ hw_rei //May need to be a rei_stall since
+ //we write to TB's above
+ //However, it currently works ok. (JH)
+
+
+// .endc
+#endif /*rax_mode != 0 */
+
+
+ // swppal entry
+ // r0 - pt_misc
+ // r17 - new PC
+ // r18 - new PCBB
+ // r19 - new VPTB
+sys_reset_switch:
+ or r31, 1, r9
+ sll r9, pt_misc_v_switch, r9
+ bic r0, r9, r0 // clear switch bit
+ mtpr r0, pt_misc
+
+ rpcc r1 // get cyccounter
+
+ ldqp r22, osfpcb_q_fen(r18) // get new fen/pme
+ ldlp r23, osfpcb_l_cc(r18) // get cycle counter
+ ldlp r24, osfpcb_l_asn(r18) // get new asn
+
+
+ ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr
+ sll r25, page_offset_size_bits, r25 // convert pfn to pa
+ mtpr r25, pt_ptbr // load the new mmptr
+ mtpr r18, pt_pcbb // set new pcbb
+
+ bic r17, 3, r17 // clean use pc
+ mtpr r17, exc_addr // set new pc
+ mtpr r19, mvptbr
+ mtpr r19, ivptbr
+
+ ldqp r30, osfpcb_q_Usp(r18) // get new usp
+ mtpr r30, pt_usp // save usp
+
+ sll r24, dtb_asn_v_asn, r8
+ mtpr r8, dtb_asn
+ sll r24, itb_asn_v_asn, r24
+ mtpr r24, itb_asn
+
+ mfpr r25, icsr // get current icsr
+ lda r24, 1(r31)
+ sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position
+ bic r25, r24, r25 // clean out old fpe
+ and r22, 1, r22 // isolate new fen bit
+ sll r22, icsr_v_fpe, r22
+ or r22, r25, r25 // or in new fpe
+ mtpr r25, icsr // update ibox ipr
+
+ subl r23, r1, r1 // gen new cc offset
+ insll r1, 4, r1 // << 32
+ mtpr r1, cc // set new offset
+
+ or r31, r31, r0 // set success
+ ldqp r30, osfpcb_q_Ksp(r18) // get new ksp
+ mfpr r31, pt0 // stall
+ hw_rei_stall
+
+// .sbttl "SYS_MACHINE_CHECK - Machine check PAL"
+ ALIGN_BLOCK
+//+
+//sys$machine_check
+// A machine_check trap has occurred. The Icache has been flushed.
+//
+//-
+
+EXPORT(sys_machine_check)
+ // Need to fill up the refill buffer (32 instructions) and
+ // then flush the Icache again.
+ // Also, due to possible 2nd Cbox register file write for
+ // uncorrectable errors, no register file read or write for 7 cycles.
+
+ nop
+ mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later
+
+ nop
+ nop
+
+ nop
+ nop
+
+ nop
+ nop
+
+ nop
+ nop
+ // 10 instructions// 5 cycles
+
+ nop
+ nop
+
+ nop
+ nop
+
+ // Register file can now be written
+ lda r0, scb_v_procmchk(r31) // SCB vector
+ mfpr r13, pt_mces // Get MCES
+ sll r0, 16, r0 // Move SCBv to correct position
+// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit
+ bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
+
+
+ zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word
+ mtpr r14, pt_mces
+ // 20 instructions
+
+ nop
+ or r14, r0, r14 // Insert new SCB vector
+ lda r0, mchk_c_proc_hrd_error(r31) // MCHK code
+ mfpr r12, exc_addr
+
+ sll r0, 32, r0 // Move MCHK code to correct position
+ mtpr r4, pt4
+ or r14, r0, r14 // Insert new MCHK code
+ mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv
+
+ ldah r14, 0xfff0(r31)
+ mtpr r1, pt1 // Stash for scratch - 30 instructions
+
+ zap r14, 0xE0, r14 // Get Cbox IPR base
+ mtpr r12, pt10 // Stash exc_addr
+
+
+
+ mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed.
+ blbs r13, sys_double_machine_check // MCHK halt if double machine check
+
+ mtpr r6, pt6
+ mtpr r5, pt5
+
+ // Look for the powerfail cases here....
+ mfpr r4, isr
+ srl r4, isr_v_pfl, r4
+ blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending
+ lda r4, 0xffc4(r31) // get GBUS$MISCR address bits
+ sll r4, 24, r4 // shift to proper position
+ ldqp r4, 0(r4) // read GBUS$MISCR
+ srl r4, 5, r4 // isolate bit <5>
+ blbc r4, sys_mchk_collect_iprs // skip if already cleared
+ // No missed CFAIL mchk
+ lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits
+ sll r5, 24, r5 // shift to proper position
+ lda r6, 0x40(r31) // get bit <6> mask
+ ldqp r4, 0(r5) // read GBUS$SERNUM
+ or r4, r6, r6 // set bit <6>
+ stqp r6, 0(r5) // clear GBUS$SERNUM<6>
+ mb
+ mb
+
+
+ //+
+ // Start to collect the IPRs. Common entry point for mchk flows.
+ //
+ // Current state:
+ // pt0 - saved r0
+ // pt1 - saved r1
+ // pt4 - saved r4
+ // pt5 - saved r5
+ // pt6 - saved r6
+ // pt10 - saved exc_addr
+ // pt_misc<47:32> - mchk code
+ // pt_misc<31:16> - scb vector
+ // r14 - base of Cbox IPRs in IO space
+ // r0, r1, r4, r5, r6, r12, r13, r25 - available
+ // r8, r9, r10 - available as all loads are physical
+ // MCES<mchk> is set
+ //
+ //-
+
+EXPORT(sys_mchk_collect_iprs)
+ mb // MB before reading Scache IPRs
+ mfpr r1, icperr_stat
+
+ mfpr r8, dcperr_stat
+ mtpr r31, dc_flush // Flush the Dcache
+
+ mfpr r31, pt0 // Pad Mbox instructions from dc_flush
+ mfpr r31, pt0
+ nop
+ nop
+
+ ldqp r9, sc_addr(r14) // SC_ADDR IPR
+ bis r9, r31, r31 // Touch ld to make sure it completes before
+ // read of SC_STAT
+ ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR
+
+ ldqp r12, ei_addr(r14) // EI_ADDR IPR
+ ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR
+ ldqp r0, fill_syn(r14) // FILL_SYN IPR
+ bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT
+ bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT
+ ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
+ ldqp r31, ei_stat(r14) // Read again to insure it is unlocked
+
+
+
+
+ //+
+ // Look for nonretryable cases
+ // In this segment:
+ // r5<0> = 1 means retryable
+ // r4, r6, and r14 are available for scratch
+ //
+ //-
+
+
+ bis r31, r31, r5 // Clear local retryable flag
+ srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits
+
+ lda r4, 1(r31)
+ sll r4, icperr_stat_v_tmr, r4
+ and r1, r4, r4 // Timeout reset
+ bne r4, sys_cpu_mchk_not_retryable
+
+ and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked
+ bne r4, sys_cpu_mchk_not_retryable
+
+ lda r4, 1(r31)
+ sll r4, sc_stat_v_sc_scnd_err, r4
+ and r10, r4, r4 // 2nd Scache error occurred
+ bne r4, sys_cpu_mchk_not_retryable
+
+
+ bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control
+ // Parity Error, Interface Parity Error, 2nd Error
+
+ and r25, r4, r4
+ bne r4, sys_cpu_mchk_not_retryable
+
+// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
+ bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
+ and r25, r4, r4 // Isolate the Uncorrectable Error Bit
+// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
+ bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
+ cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error
+ bne r4, sys_cpu_mchk_not_retryable
+
+ lda r4, 7(r31)
+ and r10, r4, r4 // Isolate the Scache Tag Parity Error bits
+ bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable
+
+
+ lda r4, 0x7f8(r31)
+ and r10, r4, r4 // Isolate the Scache Data Parity Error bits
+ srl r10, sc_stat_v_cbox_cmd, r6
+ and r6, 0x1f, r6 // Isolate Scache Command field
+ subq r6, 1, r6 // Scache Iread command = 1
+ cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error
+ bne r4, sys_cpu_mchk_not_retryable
+
+ // Look for the system unretryable cases here....
+
+ mfpr r4, isr // mchk_interrupt pin asserted
+ srl r4, isr_v_mck, r4
+ blbs r4, sys_cpu_mchk_not_retryable
+
+
+
+ //+
+ // Look for retryable cases
+ // In this segment:
+ // r5<0> = 1 means retryable
+ // r6 - holds the mchk code
+ // r4 and r14 are available for scratch
+ //
+ //-
+
+
+ // Within the chip, the retryable cases are Istream errors
+ lda r4, 3(r31)
+ sll r4, icperr_stat_v_dpe, r4
+ and r1, r4, r4
+ cmovne r4, 1, r5 // Retryable if just Icache parity error
+
+
+ lda r4, 0x7f8(r31)
+ and r10, r4, r4 // Isolate the Scache Data Parity Error bits
+ srl r10, sc_stat_v_cbox_cmd, r14
+ and r14, 0x1f, r14 // Isolate Scache Command field
+ subq r14, 1, r14 // Scache Iread command = 1
+ cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set
+ cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread
+ bis r4, r5, r5 // Accumulate
+
+
+ bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
+ and r25, r4, r4 // Isolate the Uncorrectable Error Bit
+ and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
+ cmovne r4, 1, r4 // r4 = 1 if uncorr error
+ cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread
+ bis r4, r5, r5 // Accumulate
+
+ mfpr r6, pt_misc
+ extwl r6, 4, r6 // Fetch mchk code
+ bic r6, 1, r6 // Clear flag from interrupt flow
+ cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code
+
+
+
+ // In the system, the retryable cases are ...
+ // (code here handles beh model read NXM)
+
+#if beh_model != 0
+// .if ne beh_model
+ ldah r4, 0xC000(r31) // Get base of demon space
+ lda r4, 0x550(r4) // Add NXM demon flag offset
+
+ ldqp r4, 0(r4) // Read the demon register
+ lda r14, mchk_c_read_nxm(r31)
+ cmovlbs r4, r14, r6 // Set mchk code if read NXM
+ cmovlbs r4, 1, r4
+ bis r4, r5, r5 // Accumulate retry bit
+#endif
+
+
+ //+
+ // Write the logout frame
+ //
+ // Current state:
+ // r0 - fill_syn
+ // r1 - icperr_stat
+ // r4 - available
+ // r5<0> - retry flag
+ // r6 - mchk code
+ // r8 - dcperr_stat
+ // r9 - sc_addr
+ // r10 - sc_stat
+ // r12 - ei_addr
+ // r13 - bc_tag_addr
+ // r14 - available
+ // r25 - ei_stat (shifted)
+ // pt0 - saved r0
+ // pt1 - saved r1
+ // pt4 - saved r4
+ // pt5 - saved r5
+ // pt6 - saved r6
+ // pt10 - saved exc_addr
+ //
+ //-
+
+sys_mchk_write_logout_frame:
+ // Get base of the logout area.
+ GET_IMPURE(r14) // addr of per-cpu impure area
+ GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)
+
+ // Write the first 2 quadwords of the logout area:
+
+ sll r5, 63, r5 // Move retry flag to bit 63
+ lda r4, mchk_size(r5) // Combine retry flag and frame size
+ stqp r4, mchk_flag(r14) // store flag/frame size
+ lda r4, mchk_sys_base(r31) // sys offset
+ sll r4, 32, r4
+ lda r4, mchk_cpu_base(r4) // cpu offset
+ stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame
+
+ //+
+ // Write the mchk code to the logout area
+ // Write error IPRs already fetched to the logout area
+ // Restore some GPRs from PALtemps
+ //-
+
+ mfpr r5, pt5
+ stqp r6, mchk_mchk_code(r14)
+ mfpr r4, pt4
+ stqp r1, mchk_ic_perr_stat(r14)
+ mfpr r6, pt6
+ stqp r8, mchk_dc_perr_stat(r14)
+ mfpr r1, pt1
+ stqp r9, mchk_sc_addr(r14)
+ stqp r10, mchk_sc_stat(r14)
+ stqp r12, mchk_ei_addr(r14)
+ stqp r13, mchk_bc_tag_addr(r14)
+ stqp r0, mchk_fill_syn(r14)
+ mfpr r0, pt0
+ sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position
+ // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
+ ldah r13, 0xfff0(r31)
+ zapnot r13, 0x1f, r13
+ ldqp r13, ei_stat(r13)
+ sll r13, 64-ei_stat_v_bc_tperr, r13
+ srl r13, 64-ei_stat_v_bc_tperr, r13
+ or r25, r13, r25
+ stqp r25, mchk_ei_stat(r14)
+
+
+
+
+ //+
+ // complete the CPU-specific part of the logout frame
+ //-
+
+#ifndef SIMOS
+ // cant' assemble.Where is the macro ?
+ mchk_logout mm_stat
+ mchk_logout va // Unlocks VA and MM_STAT
+ mchk_logout isr
+ mchk_logout icsr
+ mchk_logout pal_base
+ mchk_logout exc_mask
+ mchk_logout exc_sum
+#endif
+
+ ldah r13, 0xfff0(r31)
+ zap r13, 0xE0, r13 // Get Cbox IPR base
+ ldqp r13, ld_lock(r13) // Get ld_lock IPR
+ stqp r13, mchk_ld_lock(r14) // and stash it in the frame
+
+ //+
+ // complete the PAL-specific part of the logout frame
+ //-
+#ifdef vms
+ t = 0
+ .repeat 24
+ pt_mchk_logout \t
+ t = t + 1
+ .endr
+#endif
+#ifndef SIMOS
+ //can't assemble ?
+ pt_mchk_logout 0
+ pt_mchk_logout 1
+ pt_mchk_logout 2
+ pt_mchk_logout 3
+ pt_mchk_logout 4
+ pt_mchk_logout 5
+ pt_mchk_logout 6
+ pt_mchk_logout 7
+ pt_mchk_logout 8
+ pt_mchk_logout 9
+ pt_mchk_logout 10
+ pt_mchk_logout 11
+ pt_mchk_logout 12
+ pt_mchk_logout 13
+ pt_mchk_logout 14
+ pt_mchk_logout 15
+ pt_mchk_logout 16
+ pt_mchk_logout 17
+ pt_mchk_logout 18
+ pt_mchk_logout 19
+ pt_mchk_logout 20
+ pt_mchk_logout 21
+ pt_mchk_logout 22
+ pt_mchk_logout 23
+#endif
+
+
+ //+
+ // Log system specific info here
+ //-
+
+#if alpha_fw != 0
+// .if ne alpha_fw
+storeTLEP_:
+ lda r13, 0xffc4(r31) // Get GBUS$MISCR address
+ sll r13, 24, r13
+ ldqp r13, 0(r13) // Read GBUS$MISCR
+ sll r13, 16, r13 // shift up to proper field
+ mfpr r8, pt_whami // get our node id
+ extbl r8, 1, r8 // shift to bit 0
+ or r13, r8, r13 // merge MISCR and WHAMI
+ stlp r13, mchk$gbus(r14) // write to logout area
+ srl r8, 1, r8 // shift off cpu number
+
+ Get_TLSB_Node_Address r8,r13 // compute our nodespace address
+
+ OSFmchk_TLEPstore tldev, tlsb=1
+ OSFmchk_TLEPstore tlber, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlcnr, tlsb=1
+ OSFmchk_TLEPstore tlvid, tlsb=1
+ OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1
+ OSFmchk_TLEPstore tlmodconfig
+ OSFmchk_TLEPstore tlepaerr, clr=1
+ OSFmchk_TLEPstore tlepderr, clr=1
+ OSFmchk_TLEPstore tlepmerr, clr=1
+ OSFmchk_TLEPstore tlintrmask0
+ OSFmchk_TLEPstore tlintrmask1
+ OSFmchk_TLEPstore tlintrsum0
+ OSFmchk_TLEPstore tlintrsum1
+ OSFmchk_TLEPstore tlep_vmg
+// .endc
+#endif /*alpha_fw != 0 */
+ // Unlock IPRs
+ lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
+ mtpr r8, dcperr_stat // Clear Dcache parity error status
+
+ lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
+ mtpr r8, icperr_stat // Clear Icache parity error & timeout status
+
+1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value
+ GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 2f // check next case if nothing set
+ lda r0, mchk_c_retryable_ird(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value
+ GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 3f // check next case if nothing set
+ lda r0, mchk_c_dcperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value
+ GET_ADDR(r0,0x107ff,r31) // get SC_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 4f // check next case if nothing set
+ lda r0, mchk_c_scperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
+ GET_ADDR(r0,0x30000000,r31) // get EI_STAT value
+ and r0, r8, r0 // compare
+ beq r0, 5f // check next case if nothing set
+ lda r0, mchk_c_bcperr(r31) // set new MCHK code
+ br r31, do_670 // setup new vector
+
+5: ldlp r8, mchk_tlber(r14) // get TLBER value
+ GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value
+ sll r0, 16, r0 // shift into proper position
+ GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value
+ or r0, r1, r0 // merge mask values
+ and r0, r8, r0 // compare
+ beq r0, 6f // check next case if nothing set
+ GET_ADDR(r0, 0xfff0, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
+ GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 7f // check next case if nothing set
+ GET_ADDR(r0, 0xfffa, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value
+ GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 8f // check next case if nothing set
+ GET_ADDR(r0, 0xfffb, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value
+ GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value
+ and r0, r8, r0 // compare
+ beq r0, 9f // check next case if nothing set
+ GET_ADDR(r0, 0xfffc, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
+ GET_ADDR(r0,0xb,r31) // get EI_STAT mask value
+ sll r0, 32, r0 // shift to upper lw
+ and r0, r8, r0 // compare
+ beq r0, 1f // check next case if nothing set
+ GET_ADDR(r0,0xfffd,r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
+ GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value
+ and r0, r8, r0 // compare
+ beq r0, cont_logout_frame // check next case if nothing set
+ GET_ADDR(r0, 0xfffe, r31) // set new MCHK code
+ br r31, do_660 // setup new vector
+
+do_670: lda r8, scb_v_procmchk(r31) // SCB vector
+ br r31, do_6x0_cont
+do_660: lda r8, scb_v_sysmchk(r31) // SCB vector
+do_6x0_cont:
+ sll r8, 16, r8 // shift to proper position
+ mfpr r1, pt_misc // fetch current pt_misc
+ GET_ADDR(r4,0xffff, r31) // mask for vector field
+ sll r4, 16, r4 // shift to proper position
+ bic r1, r4, r1 // clear out old vector field
+ or r1, r8, r1 // merge in new vector
+ mtpr r1, pt_misc // save new vector field
+ stlp r0, mchk_mchk_code(r14) // save new mchk code
+
+cont_logout_frame:
+ // Restore some GPRs from PALtemps
+ mfpr r0, pt0
+ mfpr r1, pt1
+ mfpr r4, pt4
+
+ mfpr r12, pt10 // fetch original PC
+ blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal
+
+//XXXbugnion pvc_jsr armc, bsr=1
+ bsr r12, sys_arith_and_mchk // go check for and deal with arith trap
+
+ mtpr r31, exc_sum // Clear Exception Summary
+
+ mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc
+ stqp r25, mchk_exc_addr(r14)
+
+ //+
+ // Set up the km trap
+ //-
+
+
+sys_post_mchk_trap:
+ mfpr r25, pt_misc // Check for flag from mchk interrupt
+ extwl r25, 4, r25
+ blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
+
+ bis r14, r31, r12 // stash pointer to logout area
+ mfpr r14, pt10 // get exc_addr
+
+ sll r11, 63-3, r25 // get mode to msb
+ bge r25, 3f
+
+ mtpr r31, dtb_cm
+ mtpr r31, ev5__ps
+
+ mtpr r30, pt_usp // save user stack
+ mfpr r30, pt_ksp
+
+3:
+ lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ nop
+
+ stq r18, osfsf_a2(sp) // a2
+ stq r11, osfsf_ps(sp) // save ps
+
+ stq r14, osfsf_pc(sp) // save pc
+ mfpr r25, pt_entint // get the VA of the interrupt routine
+
+ stq r16, osfsf_a0(sp) // a0
+ lda r16, osfint_c_mchk(r31) // flag as mchk in a0
+
+ stq r17, osfsf_a1(sp) // a1
+ mfpr r17, pt_misc // get vector
+
+ stq r29, osfsf_gp(sp) // old gp
+ mtpr r25, exc_addr //
+
+ or r31, 7, r11 // get new ps (km, high ipl)
+ subq r31, 1, r18 // get a -1
+
+ extwl r17, 2, r17 // a1 <- interrupt vector
+ bis r31, ipl_machine_check, r25
+
+ mtpr r25, ipl // Set internal ipl
+ srl r18, 42, r18 // shift off low bits of kseg addr
+
+ sll r18, 42, r18 // shift back into position
+ mfpr r29, pt_kgp // get the kern r29
+
+ or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+ hw_rei_spe // out to interrupt dispatch routine
+
+
+ //+
+ // The stack is pushed. Load up a0,a1,a2 and vector via entInt
+ //
+ //-
+ ALIGN_BRANCH
+sys_mchk_stack_done:
+ lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
+ lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector
+
+ subq r31, 1, r18 // get a -1
+ mfpr r25, pt_entInt
+
+ srl r18, 42, r18 // shift off low bits of kseg addr
+ mtpr r25, exc_addr // load interrupt vector
+
+ sll r18, 42, r18 // shift back into position
+ or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
+
+ hw_rei_spe // done
+
+
+ ALIGN_BRANCH
+sys_cpu_mchk_not_retryable:
+ mfpr r6, pt_misc
+ extwl r6, 4, r6 // Fetch mchk code
+ br r31, sys_mchk_write_logout_frame //
+
+
+
+//+
+//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
+// already set. We will now double machine check halt.
+//
+// pt0 - old R0
+//
+//+
+
+EXPORT(sys_double_machine_check)
+#ifndef SIMOS
+ pvc$jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_dbl_mchk(r31)
+ br r31, sys_enter_console
+
+//+
+//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
+// a PAL PC. We will now machine check halt.
+//
+// pt0 - old R0
+//
+//+
+sys_machine_check_while_in_pal:
+ stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written
+
+#ifndef SIMOS
+ pvc$jsr updpcb, bsr=1
+ bsr r0, pal_update_pcb // update the pcb
+#endif
+ lda r0, hlt_c_mchk_from_pal(r31)
+ br r31, sys_enter_console
+
+
+//ARITH and MCHK
+// Check for arithmetic errors and build trap frame,
+// but don't post the trap.
+// on entry:
+// pt10 - exc_addr
+// r12 - return address
+// r14 - logout frame pointer
+// r13 - available
+// r8,r9,r10 - available except across stq's
+// pt0,1,6 - available
+//
+// on exit:
+// pt10 - new exc_addr
+// r17 = exc_mask
+// r16 = exc_sum
+// r14 - logout frame pointer
+//
+ ALIGN_BRANCH
+sys_arith_and_mchk:
+ mfpr r13, ev5__exc_sum
+ srl r13, exc_sum_v_swc, r13
+ bne r13, handle_arith_and_mchk
+
+// XXX bugnion pvc$jsr armc, bsr=1, dest=1
+ ret r31, (r12) // return if no outstanding arithmetic error
+
+handle_arith_and_mchk:
+ mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
+ // no virt ref for next 2 cycles
+ mtpr r14, pt0
+
+ mtpr r1, pt1 // get a scratch reg
+ and r11, osfps_m_mode, r1 // get mode bit
+
+ bis r11, r31, r25 // save ps
+ beq r1, 1f // if zero we are in kern now
+
+ bis r31, r31, r25 // set the new ps
+ mtpr r30, pt_usp // save user stack
+
+ mfpr r30, pt_ksp // get kern stack
+1:
+ mfpr r14, exc_addr // get pc into r14 in case stack writes fault
+
+ lda sp, 0-osfsf_c_size(sp) // allocate stack space
+ mtpr r31, ev5__ps // Set Ibox current mode to kernel
+
+ mfpr r1, pt_entArith
+ stq r14, osfsf_pc(sp) // save pc
+
+ stq r17, osfsf_a1(sp)
+ mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
+
+ stq r29, osfsf_gp(sp)
+ stq r16, osfsf_a0(sp) // save regs
+
+ bis r13, r31, r16 // move exc_sum to r16
+ stq r18, osfsf_a2(sp)
+
+ stq r11, osfsf_ps(sp) // save ps
+ mfpr r29, pt_kgp // get the kern gp
+
+ mfpr r14, pt0 // restore logout frame pointer from pt0
+ bis r25, r31, r11 // set new ps
+
+ mtpr r1, pt10 // Set new PC
+ mfpr r1, pt1
+
+// XXX bugnion pvc$jsr armc, bsr=1, dest=1
+ ret r31, (r12) // return if no outstanding arithmetic error
+
+
+
+// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"
+
+ ALIGN_BLOCK
+
+// SYS$enter_console
+//
+// Entry:
+// Entered when PAL wants to enter the console.
+// usually as the result of a HALT instruction or button,
+// or catastrophic error.
+//
+// Regs on entry...
+//
+// R0 = halt code
+// pt0 <- r0
+//
+// Function:
+//
+// Save all readable machine state, and "call" the console
+//
+// Returns:
+//
+//
+// Notes:
+//
+// In these routines, once the save state routine has been executed,
+// the remainder of the registers become scratchable, as the only
+// "valid" copy of them is the "saved" copy.
+//
+// Any registers or PTs that are modified before calling the save
+// routine will have there data lost. The code below will save all
+// state, but will loose pt 0,4,5.
+//
+//-
+
+EXPORT(sys_enter_console)
+ mtpr r1, pt4
+ mtpr r3, pt5
+#ifdef SIMOS
+ subq r31, 1, r1
+ sll r1, 42, r1
+ ldah r1, 1(r1)
+#else /* SIMOS */
+ lda r3, pal_enter_console_ptr(r31) //find stored vector
+ ldqp r1, 0(r3)
+#endif /* SIMOS */
+
+#ifdef SIMOS
+ /* taken from scrmax, seems like the obvious thing to do */
+ mtpr r1, exc_addr
+ mfpr r1, pt4
+ mfpr r3, pt5
+ STALL
+ STALL
+ hw_rei_stall
+#else
+ pvc$violate 1007
+ jmp r31, (r1) // off to common routine
+#endif
+
+
+// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
+//+
+// sys$exit_console
+//
+// Entry:
+// Entered when console wants to reenter PAL.
+// usually as the result of a CONTINUE.
+//
+//
+// Regs' on entry...
+//
+//
+// Function:
+//
+// Restore all readable machine state, and return to user code.
+//
+//
+//
+//-
+ ALIGN_BLOCK
+sys_exit_console:
+ //Disable physical mode:
+#if enable_physical_console != 0
+// .if ne enable_physical_console
+ mfpr r25, pt_ptbr
+ bic r25, 1, r25 // clear physical console flag
+ mtpr r25, pt_ptbr
+#endif
+
+ GET_IMPURE(r1)
+
+ // clear lock and intr_flags prior to leaving console
+ rc r31 // clear intr_flag
+ // lock flag cleared by restore_state
+#ifndef SIMOS
+ pvc$jsr rststa, bsr=1
+ bsr r3, pal_restore_state // go restore all state
+ // note, R1 and R3 are NOT restored
+ // by restore_state.
+#endif
+ // TB's have been flushed
+
+ ldqp r3, (cns_gpr+(8*3))(r1) // restore r3
+ ldqp r1, (cns_gpr+8)(r1) // restore r1
+ hw_rei_stall // back to user
+
+#if turbo_pcia_intr_fix != 0
+// .if ne turbo_pcia_intr_fix
+check_pcia_intr:
+ mfpr r14, pt14 // fetch saved PCIA interrupt info
+ beq r14, check_done // don't bother checking if no info
+ mfpr r13, ipl // check the current IPL
+ bic r13, 3, r25 // isolate ipl<5:2>
+ cmpeq r25, 0x14, r25 // is it an I/O interrupt?
+ beq r25, check_done // no, return
+ and r13, 3, r25 // get I/O interrupt index
+ extbl r14, r25, r13 // extract info for this interrupt
+ beq r13, check_done // if no info, return
+
+ // This is an RTI from a PCIA interrupt
+ lda r12, 1(r31) // get initial bit mask
+ sll r12, r25, r25 // shift to select interrupt index
+ zap r14, r25, r14 // clear out info from this interrupt
+ mtpr r14, pt14 // and save it
+
+ and r13, 3, r25 // isolate HPC field
+ subq r25, 1, r25 // subtract 1 to get HPC number
+ srl r13, 2, r13 // generate base register address
+ sll r13, 6, r13 // get slot/hose address bits
+ lda r13, 0x38(r13) // insert other high bits
+ sll r13, 28, r13 // shift high bits into position
+
+ // Read the IPROGx register
+ sll r25, 21, r14 // HPC address bit position
+ or r13, r14, r14 // add in upper bits
+ lda r14, 0x400(r14) // add in lower bits
+ ldqp r14, 0(r14) // read IPROG
+ srl r14, 4, r12 // check the In Progress bit
+ blbc r12, 1f // skip if none in progress
+ and r14, 0xf, r14 // isolate interrupt source
+ lda r12, 1(r31) // make initial mask
+ sll r12, r14, r14 // shift to make new intr source mask
+ br r31, 2f
+ // Write the SMPLIRQx register
+1: or r31, r31, r14 // default interrupt source mask
+2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data
+ bic r12, r14, r12 // clear any interrupts in progres
+//orig lda r14, <0xbffc@-2>(r31) // get register address bits
+ lda r14,(0xbffc>>2)(r31)
+
+ sll r14, 10, r14 // shift into position
+ or r14, r13, r14 // add in upper bits
+ sll r25, 8, r25 // shift HPC number into position
+ or r14, r25, r14 // add in lower bits
+ stqp r12, 0(r14) // write SMPLIRQx register
+ mb
+ ldqp r12, 0(r14) // read it back
+ bis r12, r12, r12 // touch register to insure completion
+
+check_done: // do these now and return
+ lda r25, osfsf_c_size(sp) // get updated sp
+ bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
+ br r31, pcia_check_return
+#endif
+
+
+// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only
+
+ ALIGN_128
+
+kludge_initial_pcbb: // PCB is 128 bytes long
+// .repeat 16
+// .quad 0
+// .endr
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+ nop
+ nop
+ nop
+ nop
+
+// .sbttl "SET_SC_BC_CTL subroutine"
+//
+// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
+// There must be no outstanding memory references -- istream or dstream -- when
+// these registers are written. EV5 prefetcher is difficult to turn off. So,
+// this routine needs to be exactly 32 instructions long// the final jmp must
+// be in the last octaword of a page (prefetcher doesn't go across page)
+//
+//
+// Register expecations:
+// r0 base address of CBOX iprs
+// r5 value to set sc_ctl to (flush bit is added in)
+// r6 value to set bc_ctl to
+// r7 value to set bc_config to
+// r10 return address
+// r19 old sc_ctl value
+// r20 old value of bc_ctl
+// r21 old value of bc_config
+// r23 flush scache flag
+// Register usage:
+// r17 sc_ctl with flush bit cleared
+// r22 loop address
+//
+//
+#ifndef SIMOS
+ align_page <32*4> // puts start of routine at next page boundary minus 32 longwords.
+#endif
+
+set_sc_bc_ctl:
+
+#ifndef SIMOS
+ br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest
+sc_ctl_loop:
+// XXX bugnion pvc$jsr scloop, dest=1
+ mb
+ mb
+
+ bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23)
+
+ stqp r19, ev5__sc_ctl(r0) // write sc_ctl
+ stqp r20, ev5__bc_ctl(r0) // write bc_ctl
+ bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop
+ stqp r21, bc_config(r0) // write bc_config register
+ bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop
+
+ bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set
+ //NOTE: only works because flush bit is in lower 16 bits
+
+ wmb // don't merge with other writes
+ stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit
+ ldqp r17, ev5__sc_ctl(r0) // read sc_ctl
+ bis r17, r17, r17 // stall until the data comes back
+ bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop
+
+ // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
+ t = 0
+ .repeat 15
+ unop
+ t = t + 1
+ .endr
+ $opdef mnemonic= myjmp, -
+ format= <custom=iregister, iregister, branch_offset>, -
+ encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>
+
+// XXXbugnion pvc$jsr scloop
+ myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
+ // of straight) // r22 gets sc_ctl_done
+ // 2nd time, code continues at sc_ctl_done (I hope)
+sc_ctl_done:
+// XXX bugnion pvc$jsr scloop, dest=1
+// XXX bugnion pvc$jsr scbcctl
+#endif /*SIMOS*/
+ ret r31, (r10) // return to where we came from
+
+
+.end
+
+
+
+
diff --git a/system/alpha/palcode/platform_tlaser.s b/system/alpha/palcode/platform_tlaser.s
deleted file mode 100644
index d5a8b9fdd..000000000
--- a/system/alpha/palcode/platform_tlaser.s
+++ /dev/null
@@ -1,2821 +0,0 @@
-// build_fixed_image: not sure what means
-// real_mm to be replaced during rewrite
-// remove_save_state remove_restore_state can be remooved to save space ??
-
-
-#define egore 0
-#define acore 0
-#define beh_model 0
-#define ev5_p2 1
-#define ev5_p1 0
-#define ldvpte_bug_fix 1
-#define spe_fix 0
-#define osf_chm_fix 0
-#define build_fixed_image 0
-#define enable_p4_fixups 0
-#define osf_svmin 1
-#define enable_physical_console 0
-#define fill_err_hack 0
-#define icflush_on_tbix 0
-#define max_cpuid 1
-#define perfmon_debug 0
-#define rax_mode 0
-
-#define hw_rei_spe hw_rei
-
-#include "ev5_defs.h"
-#include "ev5_impure.h"
-#include "ev5_alpha_defs.h"
-#include "ev5_paldef.h"
-#include "ev5_osfalpha_defs.h"
-#include "fromHudsonMacros.h"
-#include "fromHudsonOsf.h"
-#include "dc21164FromGasSources.h"
-#include "cserve.h"
-#include "tlaserreg.h"
-//#include "simos.h"
-
-
-#define ldlp ldl_p
-#define ldqp ldq_p
-
-#define stlp stl_p
-#define stqp stq_p
-#define stqpc stqp
-
-#ifdef SIMOS
-#define ldqpl ldq_p
-#define sdqpl sdq_p
-#else
-<--bomb>
-#endif
-
-#define pt_entInt pt_entint
-#define pt_entArith pt_entarith
-#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8)
-#define mchk_flag CNS_Q_FLAG
-#define mchk_sys_base 56
-#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
-#define mchk_offsets CNS_Q_EXC_ADDR
-#define mchk_mchk_code 8
-#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
-#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
-#define mchk_sc_addr CNS_Q_SC_ADDR
-#define mchk_sc_stat CNS_Q_SC_STAT
-#define mchk_ei_addr CNS_Q_EI_ADDR
-#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
-#define mchk_fill_syn CNS_Q_FILL_SYN
-#define mchk_ei_stat CNS_Q_EI_STAT
-#define mchk_exc_addr CNS_Q_EXC_ADDR
-#define mchk_ld_lock CNS_Q_LD_LOCK
-#define osfpcb_q_Ksp pcb_q_ksp
-#define pal_impure_common_size ((0x200 + 7) & 0xfff8)
-
-#define ALIGN_BLOCK \
- .align 5
-
-#define ALIGN_BRANCH \
- .align 3
-
-#define EXPORT(_x) \
- .align 5; \
- .globl _x; \
-_x:
-
-// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
-// XXX the following is 'made up'
-// XXX bugnion
-
-// XXX bugnion not sure how to align 'quad'
-#define ALIGN_QUAD \
- .align 3
-
-#define ALIGN_128 \
- .align 7
-
-
-#define GET_IMPURE(_r) mfpr _r,pt_impure
-#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2)
-
-
-#define BIT(_x) (1<<(_x))
-
-
-// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
-// XXX back to original code
-
-// .sbttl "System specific code - beh model version"
-
-//
-// Entry points
-// SYS$CFLUSH - Cache flush
-// SYS$CSERVE - Console service
-// SYS$WRIPIR - interprocessor interrupts
-// SYS$HALT_INTERRUPT - Halt interrupt
-// SYS$PASSIVE_RELEASE - Interrupt, passive release
-// SYS$INTERRUPT - Interrupt
-// SYS$RESET - Reset
-// SYS$ENTER_CONSOLE
-
-//
-// Macro to read TLINTRSUMx
-//
-// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
-//
-// Assumed register usage:
-// rsum TLINTRSUMx contents
-// raddr node space address
-// scratch scratch register
-
-
-// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2
-//
-// nop
-// mfpr 'scratch', pt_whami // Get our whami (VID)
-//
-// extbl 'scratch', #1, 'scratch' // shift down to bit 0
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// srl 'scratch', #1, 'rsum' // Shift off the cpu number
-//
-// sll 'rsum', #22, 'rsum' // Get our node offset
-// addq 'raddr', 'rsum', 'raddr' // Get our base node space address
-//
-// blbs 'scratch', label1
-// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
-//
-// br r31, label2
-//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
-//
-//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg
-//.endm
-
-#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \
- nop; \
- mfpr _scratch,pt_whami; \
- extbl _scratch,1,_scratch; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- srl _scratch,1,_rsum; \
- sll _rsum,22,_rsum; \
- addq _raddr,_rsum,_raddr; \
- blbs _scratch,1f; \
- lda _raddr,0x1180(_raddr); \
- br r31,2f; \
-1: \
- lda _raddr,0x11c0(_raddr); \
-2: ldlp _rsum,0(_raddr)
-
-
-
-//
-// Macro to write TLINTRSUMx
-//
-// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
-//
-// Assumed register usage:
-// rsum TLINTRSUMx write data
-// raddr node space address
-// scratch scratch register
-
-// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2
-//
-// nop
-// mfpr 'whami', pt_whami // Get our whami (VID)
-//
-// extbl 'whami', #1, 'whami' // shift down to bit 0
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// blbs 'whami', label1
-//
-// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
-// br r31, label2
-//
-// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
-// label2: srl 'whami', #1, 'whami' // Shift off the cpu number
-//
-// sll 'whami', #22, 'whami' // Get our node offset
-// addq 'raddr', 'whami', 'raddr' // Get our base node space address
-//
-// mb
-// stqp 'rsum', 0('raddr') // write the right tlintrsum reg
-// mb
-// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum
-// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo
-// .endm
-
-
-#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \
- nop; \
- mfpr _whami,pt_whami; \
- extbl _whami,1,_whami; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- blbs _whami,1f; \
- lda _raddr,0x1180(_raddr);\
- br zero,2f; \
-1: lda _raddr,0x11c0(_raddr);\
-2: srl _whami,1,_whami; \
- addq _raddr,_whami,_raddr; \
- mb; \
- stqp _rsum,0(_raddr); \
- ldqp _rsum,0(_raddr); \
- bis _rsum,_rsum,_rsum
-
-
-//
-// Macro to determine highest priority TIOP Node ID from interrupt pending mask
-//
-// Assumed register usage:
-// rmask - TLINTRSUMx contents, shifted to isolate IOx bits
-// rid - TLSB Node ID of highest TIOP
-
-//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
-// srl 'rmask', #4, 'rid' // check IOP8
-// blbc 'rid', l1 // not IOP8
-//
-// lda 'rid', 8(r31) // IOP8
-// br r31, l6
-//
-// l1: srl 'rmask', #3, 'rid' // check IOP7
-// blbc 'rid', l2 // not IOP7
-//
-// lda 'rid', 7(r31) // IOP7
-// br r31, l6
-//
-// l2: srl 'rmask', #2, 'rid' // check IOP6
-// blbc 'rid', l3 // not IOP6
-//
-// lda 'rid', 6(r31) // IOP6
-// br r31, l6
-//
-// l3: srl 'rmask', #1, 'rid' // check IOP5
-// blbc 'rid', l4 // not IOP5
-//
-// lda 'rid', 5(r31) // IOP5
-// br r31, l6
-//
-// l4: srl 'rmask', #0, 'rid' // check IOP4
-// blbc 'rid', l5 // not IOP4
-//
-// lda r14, 4(r31) // IOP4
-// br r31, l6
-//
-// l5: lda r14, 0(r31) // passive release
-// l6:
-// .endm
-
-
-#define Intr_Find_TIOP(_rmask,_rid) \
- srl _rmask,3,_rid; \
- blbc _rid,1f; \
- lda _rid,8(zero); \
- br zero,6f; \
-1: srl _rmask,3,_rid; \
- blbc _rid, 2f; \
- lda _rid, 7(r31); \
- br r31, 6f; \
-2: srl _rmask, 2, _rid; \
- blbc _rid, 3f; \
- lda _rid, 6(r31); \
- br r31, 6f; \
-3: srl _rmask, 1, _rid; \
- blbc _rid, 4f; \
- lda _rid, 5(r31); \
- br r31, 6f; \
-4: srl _rmask, 0, _rid; \
- blbc _rid, 5f; \
- lda r14, 4(r31); \
- br r31, 6f; \
-5: lda r14, 0(r31); \
-6:
-
-
-
-
-//
-// Macro to calculate base node space address for given node id
-//
-// Assumed register usage:
-// rid - TLSB node id
-// raddr - base node space address
-
-//.macro Get_TLSB_Node_Address rid, raddr
-// sll 'rid', #22, 'rid' // Get offset of IOP node
-// lda 'raddr', ^xff88(r31) // Get base node space address bits
-//
-// sll 'raddr', #24, 'raddr' // Shift up to proper position
-// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address
-// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id
-//.endm
-
-
-#define turbo_pcia_intr_fix 0
-
-
-#if turbo_pcia_intr_fix != 0
-#define Get_TLSB_Node_Address(_rid,_raddr) \
- sll _rid,22,_rid; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- addq _raddr,_rid,_raddr; \
- srl _rid,22,_rid
-#else
-#define Get_TLSB_Node_Address(_rid,_raddr) \
- sll _rid,22,_rid; \
- lda _raddr,0xff88(zero); \
- sll _raddr,24,_raddr; \
- addq _raddr,_rid,_raddr
-#endif
-
-
-
-
-
-// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
-// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31)
-// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31)
-// or 'rs1', 'nodebase', 'rs1'
-// ldlp 'rs', 0('rs1')
-// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame
-// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame
-// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear
-// .endm
-
-
-// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
-// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
-// .endm
-
-#define CONCAT(_a,_b) _a ## _b
-
-#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog)
-
-
-#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
-
-
-// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
-// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
-// .endm
-
-#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
-
-#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
-
-#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
- lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
- or _rs1,_nodebase,_rs1; \
- ldlp _rs1,0(_rs1); \
- stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \
- stlp _rs,0(_rs1)
-
-
-#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
-#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
-#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)
-
-
-
-
-// .macro save_pcia_intr irq
-// and r13, #^xf, r25 // isolate low 4 bits
-// addq r14, #4, r14 // format the TIOP Node id field
-// sll r14, #4, r14 // shift the TIOP Node id
-// or r14, r25, r10 // merge Node id/hose/HPC
-// mfpr r14, pt14 // get saved value
-// extbl r14, #'irq', r25 // confirm none outstanding
-// bne r25, sys$machine_check_while_in_pal
-// insbl r10, #'irq', r10 // align new info
-// or r14, r10, r14 // merge info
-// mtpr r14, pt14 // save it
-// bic r13, #^xf, r13 // clear low 4 bits of vector
-// .endm
-
-#define save_pcia_intr(_irq) \
- and r13, 0xf, r25; \
- addq r14, 4, r14; \
- sll r14, 4, r14; \
- or r14, r25, r10; \
- mfpr r14, pt14; \
- extbl r14, _irq, r25; \
- bne r25, sys_machine_check_while_in_pal; \
- insbl r10, _irq, r10; \
- or r14, r10, r14; \
- mtpr r14, pt14; \
- bic r13, 0xf, r13
-
-
-
- ALIGN_BLOCK
-
-// .sbttl "wripir - PALcode for wripir instruction"
-//orig SYS$WRIPIR: // R16 has the processor number.
-
-EXPORT(sys_wripir)
-
-//++
-// Convert the processor number to a CPU mask
-//--
-
- and r16,0xf, r14 // mask the top stuff (16 CPUs supported)
- bis r31,0x1,r16 // get a one
- sll r16,r14,r14 // shift the bit to the right place
-
-//++
-// Build the Broadcast Space base address
-//--
- lda r13,0xff8e(r31) // Load the upper address bits
- sll r13,24,r13 // shift them to the top
-
-//++
-// Send out the IP Intr
-//--
- stqp r14, 0x40(r13) // Write to TLIPINTR reg WAS TLSB_TLIPINTR_OFFSET
- wmb // Push out the store
-
- hw_rei
-
-
- ALIGN_BLOCK
-// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
-//+
-// SYS$CFLUSH
-// Entry:
-//
-// R16 - contains the PFN of the page to be flushed
-//
-// Function:
-// Flush all Dstream caches of 1 entire page
-//
-//-
-
-EXPORT(sys_cflush)
-
-// #convert pfn to addr, and clean off <63:20>
-// #sll r16, <page_offset_size_bits>+<63-20>>, r12
- sll r16, page_offset_size_bits+(63-20),r12
-
-// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
-// # stolen from srcmax code. XXX bugnion
- lda r13, 0x10(r31) // assume 16Mbytes of cache
- sll r13, 20, r13 // convert to bytes
-
-
- srl r12, 63-20, r12 // shift back to normal position
- xor r12, r13, r12 // xor addr<18>
-
- or r31, 8192/(32*8), r13 // get count of loads
- nop
-
-cflush_loop:
- subq r13, 1, r13 // decr counter
- mfpr r25, ev5__intid // Fetch level of interruptor
-
- ldqp r31, 32*0(r12) // do a load
- ldqp r31, 32*1(r12) // do next load
-
- ldqp r31, 32*2(r12) // do next load
- ldqp r31, 32*3(r12) // do next load
-
- ldqp r31, 32*4(r12) // do next load
- ldqp r31, 32*5(r12) // do next load
-
- ldqp r31, 32*6(r12) // do next load
- ldqp r31, 32*7(r12) // do next load
-
- mfpr r14, ev5__ipl // Fetch current level
- lda r12, (32*8)(r12) // skip to next cache block addr
-
- cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl
- beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???
-
- bne r13, cflush_loop // loop till done
- hw_rei // back to user
-
- ALIGN_BRANCH
-1: // Here if interrupted
- mfpr r12, exc_addr
- subq r12, 4, r12 // Backup PC to point to CFLUSH
-
- mtpr r12, exc_addr
- nop
-
- mfpr r31, pt0 // Pad exc_addr write
- hw_rei
-
-
- ALIGN_BLOCK
-// .sbttl "CSERVE- PALcode for CSERVE instruction"
-//+
-// SYS$CSERVE
-//
-// Function:
-// Various functions for private use of console software
-//
-// option selector in r0
-// arguments in r16....
-//
-//
-// r0 = 0 unknown
-//
-// r0 = 1 ldqp
-// r0 = 2 stqp
-// args, are as for normal STQP/LDQP in VMS PAL
-//
-// r0 = 3 dump_tb's
-// r16 = detination PA to dump tb's to.
-//
-// r0<0> = 1, success
-// r0<0> = 0, failure, or option not supported
-// r0<63:1> = (generally 0, but may be function dependent)
-// r0 - load data on ldqp
-//
-//-
-EXPORT(sys_cserve)
-
-#ifdef SIMOS
- /* taken from scrmax */
- cmpeq r18, CSERVE_K_RD_IMPURE, r0
- bne r0, Sys_Cserve_Rd_Impure
-
- cmpeq r18, CSERVE_K_JTOPAL, r0
- bne r0, Sys_Cserve_Jtopal
- call_pal 0
-
- or r31, r31, r0
- hw_rei // and back we go
-
-Sys_Cserve_Rd_Impure:
- mfpr r0, pt_impure // Get base of impure scratch area.
- hw_rei
-
- ALIGN_BRANCH
-
-Sys_Cserve_Jtopal:
- bic a0, 3, t8 // Clear out low 2 bits of address
- bis t8, 1, t8 // Or in PAL mode bit
- mtpr t8,exc_addr
- hw_rei
-
-
-#else /* SIMOS */
-
- cmpeq r16, cserve_ldlp, r12 // check for ldqp
- bne r12, 1f // br if
-
- cmpeq r16, cserve_stlp, r12 // check for stqp
- bne r12, 2f // br if
-
- cmpeq r16, cserve_callback, r12 // check for callback entry
- bne r12, csrv_callback // br if
-
- cmpeq r16, cserve_identify, r12 // check for callback entry
- bne r12, csrv_identify // br if
-
- or r31, r31, r0 // set failure
- nop // pad palshadow write
-
- hw_rei // and back we go
-#endif /* SIMOS */
-
-// ldqp
- ALIGN_QUAD
-1:
- ldqp r0,0(r17) // get the data
- nop // pad palshadow write
-
- hw_rei // and back we go
-
-
-// stqp
- ALIGN_QUAD
-2:
- stqp r18, 0(r17) // store the data
-#ifdef SIMOS
- lda r0,17(r31) // bogus
-#else
- lda r0, CSERVE_SUCCESS(r31) // set success
-#endif
- hw_rei // and back we go
-
-
- ALIGN_QUAD
-csrv_callback:
- ldq r16, 0(r17) // restore r16
- ldq r17, 8(r17) // restore r17
- lda r0, hlt_c_callback(r31)
- br r31, sys_enter_console
-
-
-csrv_identify:
- mfpr r0, pal_base
- ldqp r0, 8(r0)
- hw_rei
-
-
-// dump tb's
- ALIGN_QUAD
-0:
- // DTB PTEs - 64 entries
- addq r31, 64, r0 // initialize loop counter
- nop
-
-1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp
- mfpr r12, ev5__dtb_pte // read out next pte to reg file
-
- subq r0, 1, r0 // decrement loop counter
- nop // Pad - no Mbox instr in cycle after mfpr
-
- stqp r12, 0(r16) // store out PTE
- addq r16, 8 ,r16 // increment pointer
-
- bne r0, 1b
-
- ALIGN_BRANCH
- // ITB PTEs - 48 entries
- addq r31, 48, r0 // initialize loop counter
- nop
-
-2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp
- mfpr r12, ev5__itb_pte // read out next pte to reg file
-
- subq r0, 1, r0 // decrement loop counter
- nop //
-
- stqp r12, 0(r16) // store out PTE
- addq r16, 8 ,r16 // increment pointer
-
- bne r0, 2b
- or r31, 1, r0 // set success
-
- hw_rei // and back we go
-
-
-// .sbttl "SYS$INTERRUPT - Interrupt processing code"
-
-//+
-// SYS$INTERRUPT
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12, r14 - available
-// r13 - INTID (new EV5 IPL)
-// r25 - ISR
-// r16, r17, r18 - available
-//
-//-
-
-
-EXPORT(sys_interrupt)
- cmpeq r13, 31, r12
- bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)
-
- cmpeq r13, 30, r12
- bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail)
-
- cmpeq r13, 29, r12
- bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters)
-
- cmpeq r13, 23, r12
- bne r12, sys_int_23 // Check for level 23 interrupt
-
- cmpeq r13, 22, r12
- bne r12, sys_int_22 // Check for level 22 interrupt (might be
- // interprocessor or timer interrupt)
-
- cmpeq r13, 21, r12
- bne r12, sys_int_21 // Check for level 21 interrupt
-
- cmpeq r13, 20, r12
- bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected
- // system error interrupt)
-
- mfpr r14, exc_addr // ooops, something is wrong
- br r31, pal_pal_bug_check_from_int
-
-
-
-
-//+
-//sys$int_2*
-// Routines to handle device interrupts at IPL 23-20.
-// System specific method to ack/clear the interrupt, detect passive release,
-// detect interprocessor (22), interval clock (22), corrected
-// system error (20)
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12, r14 - available
-// r13 - INTID (new EV5 IPL)
-// r25 - ISR
-//
-// On exit:
-// Interrupt has been ack'd/cleared
-// a0/r16 - signals IO device interrupt
-// a1/r17 - contains interrupt vector
-// exit to ent_int address
-//
-//-
- ALIGN_BRANCH
-sys_int_23:
- Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
- srl r13, 22, r13 // shift down to examine IPL17
-
- Intr_Find_TIOP(r13,r14)
- beq r14, 1f
-
- Get_TLSB_Node_Address(r14,r10)
- lda r10, 0xac0(r10) // Get base TLILID address
-
- ldlp r13, 0(r10) // Read the TLILID register
- bne r13, pal_post_dev_interrupt
-
-1: lda r16, osfint_c_passrel(r31) // passive release
- br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-sys_int_22:
- Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
- srl r13, 6, r14 // check the Intim bit
-
- blbs r14, tlep_intim // go service Intim
- srl r13, 5, r14 // check the IP Int bit
-
- blbs r14, tlep_ipint // go service IP Int
- srl r13, 17, r13 // shift down to examine IPL16
-
- Intr_Find_TIOP(r13,r14)
- beq r14, 1f
-
- Get_TLSB_Node_Address(r14,r10)
- lda r10, 0xa80(r10) // Get base TLILID address
-
- ldlp r13, 0(r10) // Read the TLILID register
-#if turbo_pcia_intr_fix == 0
-// .if eq turbo_pcia_intr_fix
- bne r13, pal_post_dev_interrupt
-//orig .iff
- beq r13, 1f
-
- and r13, 0x3, r10 // check for PCIA bits
- beq r10, pal_post_dev_interrupt // done if nothing set
- save_pcia_intr(2)
- br r31, pal_post_dev_interrupt //
-// .endc
-#endif /* turbo_pcia_intr_fix == 0 */
-
-1: lda r16, osfint_c_passrel(r31) // passive release
- br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-sys_int_21:
- Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
- srl r13, 12, r13 // shift down to examine IPL15
-
- Intr_Find_TIOP(r13,r14)
- beq r14, 1f
-
- Get_TLSB_Node_Address(r14,r10)
- lda r10, 0xa40(r10) // Get base TLILID address
-
- ldlp r13, 0(r10) // Read the TLILID register
-#if turbo_pcia_intr_fix == 0
-//orig .if eq turbo_pcia_intr_fix
- bne r13, pal_post_dev_interrupt
-//orig .iff
- beq r13, 1f
-
- and r13, 0x3, r10 // check for PCIA bits
- beq r10, pal_post_dev_interrupt // done if nothing set
- save_pcia_intr(1)
- br r31, pal_post_dev_interrupt //
-// orig .endc
-#endif /* turbo_pcia_intr_fix == 0 */
-
-1: lda r16, osfint_c_passrel(r31) // passive release
- br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-sys_int_20:
- lda r13, 1(r31) // Duart0 bit
- Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
-
- Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
- blbs r13, tlep_uart0 // go service UART int
-
- srl r13, 7, r13 // shift down to examine IPL14
- Intr_Find_TIOP(r13,r14)
-
- beq r14, tlep_ecc // Branch if not IPL14
- Get_TLSB_Node_Address(r14,r10)
-
- lda r10, tlsb_tlilid0_offset(r10) // Get base TLILID address
- ldlp r13, 0(r10) // Read the TLILID register
-
-#if turbo_pcia_intr_fix == 0
-// orig .if eq turbo_pcia_intr_fix
- bne r13, pal_post_dev_interrupt
-// orig .iff
- beq r13, 1f
-
- and r13, 0x3, r10 // check for PCIA bits
- beq r10, pal_post_dev_interrupt // done if nothing set
- save_pcia_intr(0)
- br r31, pal_post_dev_interrupt //
-// orig .endc
-#endif
-1: lda r16, osfint_c_passrel(r31) // passive release
- br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-tlep_intim:
- lda r13, 0xffb(r31) // get upper GBUS address bits
- sll r13, 28, r13 // shift up to top
-
- lda r13, (tlep_watch_csrc_offset)(r13) // full CSRC address
- ldqp r13, 0(r13) // read CSRC
-
- lda r13, 0x40(r31) // load Intim bit
- Write_TLINTRSUMx(r13,r10,r14) // clear the Intim bit
-
- lda r16, osfint_c_clk(r31) // passive release
- br r31, pal_post_interrupt // Build the stack frame
-
-
- ALIGN_BRANCH
-tlep_ipint:
- lda r13, 0x20(r31) // load IP Int bit
- Write_TLINTRSUMx(r13,r10,r14) // clear the IP Int bit
-
- lda r16, osfint_c_ip(r31) // passive release
- br r31, pal_post_interrupt // Build the stack frame
-
-
- ALIGN_BRANCH
-tlep_uart0:
- lda r13, 0xffa(r31) // get upper GBUS address bits
- sll r13, 28, r13 // shift up to top
-
- ldlp r14, 0x80(r13) // zero pointer register
- lda r14, 3(r31) // index to RR3
-
- stlp r14, 0x80(r13) // write pointer register
- mb
-
- mb
- ldlp r14, 0x80(r13) // read RR3
-
- srl r14, 5, r10 // is it Channel A RX?
- blbs r10, uart0_rx
-
- srl r14, 4, r10 // is it Channel A TX?
- blbs r10, uart0_tx
-
- srl r14, 2, r10 // is it Channel B RX?
- blbs r10, uart1_rx
-
- srl r14, 1, r10 // is it Channel B TX?
- blbs r10, uart1_tx
-
- lda r8, 0(r31) // passive release
- br r31, clear_duart0_int // clear tlintrsum and post
-
-
- ALIGN_BRANCH
-uart0_rx:
- lda r8, 0x680(r31) // UART0 RX vector
- br r31, clear_duart0_int // clear tlintrsum and post
-
-
- ALIGN_BRANCH
-uart0_tx:
- lda r14, 0x28(r31) // Reset TX Int Pending code
- mb
- stlp r14, 0x80(r13) // write Channel A WR0
- mb
-
- lda r8, 0x6c0(r31) // UART0 TX vector
- br r31, clear_duart0_int // clear tlintrsum and post
-
-
- ALIGN_BRANCH
-uart1_rx:
- lda r8, 0x690(r31) // UART1 RX vector
- br r31, clear_duart0_int // clear tlintrsum and post
-
-
- ALIGN_BRANCH
-uart1_tx:
- lda r14, 0x28(r31) // Reset TX Int Pending code
- stlp r14, 0(r13) // write Channel B WR0
-
- lda r8, 0x6d0(r31) // UART1 TX vector
- br r31, clear_duart0_int // clear tlintrsum and post
-
-
- ALIGN_BRANCH
-clear_duart0_int:
- lda r13, 1(r31) // load duart0 bit
- Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
-
- beq r8, 1f
- or r8, r31, r13 // move vector to r13
- br r31, pal_post_dev_interrupt // Build the stack frame
-1: nop
- nop
- hw_rei
-// lda r16, osfint_c_passrel(r31) // passive release
-// br r31, pal_post_interrupt //
-
-
- ALIGN_BRANCH
-tlep_ecc:
- mfpr r14, pt_whami // get our node id
- extbl r14, 1, r14 // shift to bit 0
-
- srl r14, 1, r14 // shift off cpu number
- Get_TLSB_Node_Address(r14,r10) // compute our nodespace address
-
- ldlp r13, 0x40(r10) // read our TLBER WAS tlsb_tlber_offset
- srl r13, 17, r13 // shift down the CWDE/CRDE bits
-
- and r13, 3, r13 // mask the CWDE/CRDE bits
- beq r13, 1f
-
- ornot r31, r31, r12 // set flag
- lda r9, mchk_c_sys_ecc(r31) // System Correctable error MCHK code
- br r31, sys_merge_sys_corr // jump to CRD logout frame code
-
-1: lda r16, osfint_c_passrel(r31) // passive release
-
-
- ALIGN_BRANCH
-
-pal_post_dev_interrupt:
- or r13, r31, r17 // move vector to a1
- or r31, osfint_c_dev, r16 // a0 signals IO device interrupt
-
-pal_post_interrupt:
- mfpr r12, pt_entint
-
- mtpr r12, exc_addr
-
- nop
- nop
-
- hw_rei_spe
-
-
-
-//+
-// sys_passive_release
-// Just pretend the interrupt never occurred.
-//-
-
-EXPORT(sys_passive_release)
- mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps
- nop
-
- mfpr r31, pt0 // Pad write to dtb_cm
- hw_rei
-
-//+
-//sys_int_powerfail
-// A powerfail interrupt has been detected. The stack has been pushed.
-// IPL and PS are updated as well.
-//
-// I'm not sure what to do here, I'm treating it as an IO device interrupt
-//
-//-
-
- ALIGN_BLOCK
-sys_int_powerfail:
- lda r12, 0xffc4(r31) // get GBUS_MISCR address bits
- sll r12, 24, r12 // shift to proper position
- ldqp r12, 0(r12) // read GBUS_MISCR
- srl r12, 5, r12 // isolate bit <5>
- blbc r12, 1f // if clear, no missed mchk
-
- // Missed a CFAIL mchk
- lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits
- sll r13, 24, r13 // shift to proper position
- lda r14, 0x40(r31) // get bit <6> mask
- ldqp r12, 0(r13) // read GBUS$SERNUM
- or r12, r14, r14 // set bit <6>
- stqp r14, 0(r13) // clear GBUS$SERNUM<6>
- mb
- mb
-
-1: br r31, sys_int_mchk // do a machine check
-
- lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector
- mfpr r25, pt_entint
-
- lda r16, osfint_c_dev(r31) // a0 to device code
- mtpr r25, exc_addr
-
- nop // pad exc_addr write
- nop
-
- hw_rei_spe
-
-//+
-// sys$halt_interrupt
-// A halt interrupt has been detected. Pass control to the console.
-//
-//
-//-
- EXPORT(sys_halt_interrupt)
-
- ldah r13, 0x1800(r31) // load Halt/^PHalt bits
- Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits
-
- mtpr r11, dtb_cm // Restore Mbox current mode
- nop
- nop
- mtpr r0, pt0
-#ifndef SIMOS
- pvc_jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt
- br r31, sys_enter_console // enter the console
-
-
-
-//+
-// sys$int_mchk_or_crd
-//
-// Current state:
-// Stack is pushed
-// ps, sp and gp are updated
-// r12
-// r13 - INTID (new EV5 IPL)
-// r14 - exc_addr
-// r25 - ISR
-// r16, r17, r18 - available
-//
-//-
- ALIGN_BLOCK
-
-sys_int_mchk_or_crd:
- srl r25, isr_v_mck, r12
- blbs r12, sys_int_mchk
- //+
- // Not a Machine check interrupt, so must be an Internal CRD interrupt
- //-
-
- mb //Clear out Cbox prior to reading IPRs
- srl r25, isr_v_crd, r13 //Check for CRD
- blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!!
-
- lda r9, 1(r31)
- sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd
- mtpr r9, ev5__hwint_clr // ack the crd interrupt
-
- or r31, r31, r12 // clear flag
- lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code
-
-sys_merge_sys_corr:
- ldah r14, 0xfff0(r31)
- mtpr r0, pt0 // save r0 for scratch
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r1, pt1 // save r0 for scratch
-
- ldqp r0, ei_addr(r14) // EI_ADDR IPR
- ldqp r10, fill_syn(r14) // FILL_SYN IPR
- bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub
-
- blbs r12, 1f // no scrubbing for IRQ0 case
-// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1
- bsr r13, sys_crd_scrub_mem // and go scrub
-
- // ld/st pair in scrub routine will have finished due
- // to ibox stall of stx_c. Don't need another mb.
- ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- or r8, r31, r12 // Must only be executed once in this flow, and must
- br r31, 2f // be after the scrub routine.
-
-1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- // For IRQ0 CRD case only - meaningless data.
-
-2: mfpr r13, pt_mces // Get MCES
- srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES
- blbc r14, 6f // branch if 630
- srl r13, mces_v_dsc, r14 // check if 620 reporting disabled
- blbc r14, 5f // branch if enabled
- or r13, r31, r14 // don't set SCE if disabled
- br r31, 8f // continue
-5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit
- br r31, 8f
-
-6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled
- blbc r14, 7f // branch if enabled
- or r13, r31, r14 // don't set PCE if disabled
- br r31, 8f // continue
-7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit
-
- // Setup SCB if dpc is not set
-8: mtpr r14, pt_mces // Store updated MCES
- srl r13, mces_v_sce, r1 // Get SCE
- srl r13, mces_v_pce, r14 // Get PCE
- or r1, r14, r1 // SCE OR PCE, since they share
- // the CRD logout frame
- // Get base of the logout area.
- GET_IMPURE(r14) // addr of per-cpu impure area
- GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)
-
- blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame
-
- // Set the 2nd error flag in the logout area:
-
- lda r1, 3(r31) // Set retry and 2nd error flags
- sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword
- stlp r1, mchk_crd_flag+4(r14) // store flag longword
- br sys_crd_ack
-
-sys_crd_write_logout_frame:
- // should only be here if neither the pce or sce bits are set
-
- //+
- // Write the mchk code to the logout area
- //-
- stqp r9, mchk_crd_mchk_code(r14)
-
-
- //+
- // Write the first 2 quadwords of the logout area:
- //-
- lda r1, 1(r31) // Set retry flag
- sll r1, 63, r9 // Move retry flag to bit 63
- lda r1, mchk_crd_size(r9) // Combine retry flag and frame size
- stqp r1, mchk_crd_flag(r14) // store flag/frame size
-
-#ifndef SIMOS
- /* needed? bugnion */
- lda r1, mchk_crd_sys_base(r31) // sys offset
- sll r1, 32, r1
- lda r1, mchk_crd_cpu_base(r1) // cpu offset
- stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame
-
-#endif
- //+
- // Write error IPRs already fetched to the logout area
- //-
- stqp r0, mchk_crd_ei_addr(r14)
- stqp r10, mchk_crd_fill_syn(r14)
- stqp r8, mchk_crd_ei_stat(r14)
- stqp r25, mchk_crd_isr(r14)
- //+
- // Log system specific info here
- //-
-crd_storeTLEP_:
- lda r1, 0xffc4(r31) // Get GBUS$MISCR address
- sll r1, 24, r1
- ldqp r1, 0(r1) // Read GBUS$MISCR
- sll r1, 16, r1 // shift up to proper field
- mfpr r10, pt_whami // get our node id
- extbl r10, 1, r10 // shift to bit 0
- or r1, r10, r1 // merge MISCR and WHAMI
- stlp r1, mchk_crd_whami(r14) // write to crd logout area
- srl r10, 1, r10 // shift off cpu number
-
- Get_TLSB_Node_Address(r10,r0) // compute our nodespace address
-
- OSFcrd_TLEPstore_tlsb(tldev)
- OSFcrd_TLEPstore_tlsb_clr(tlber)
- OSFcrd_TLEPstore_tlsb_clr(tlesr0)
- OSFcrd_TLEPstore_tlsb_clr(tlesr1)
- OSFcrd_TLEPstore_tlsb_clr(tlesr2)
- OSFcrd_TLEPstore_tlsb_clr(tlesr3)
-
-sys_crd_ack:
- mfpr r0, pt0 // restore r0
- mfpr r1, pt1 // restore r1
-
- srl r12, ei_stat_v_ei_es, r12
- blbc r12, 5f
- srl r13, mces_v_dsc, r10 // logging enabled?
- br r31, 6f
-5: srl r13, mces_v_dpc, r10 // logging enabled?
-6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it
-
- // logging not enabled --
- // Get base of the logout area.
- GET_IMPURE(r13) // addr of per-cpu impure area
- GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
- ldlp r10, mchk_crd_rsvd(r13) // bump counter
- addl r10, 1, r10
- stlp r10, mchk_crd_rsvd(r13)
- mb
- br r31, sys_crd_dismiss_interrupt // just return
-
- //+
- // The stack is pushed. Load up a0,a1,a2 and vector via entInt
- //
- //-
-
- ALIGN_BRANCH
-sys_crd_post_interrupt:
- lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
- lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector
-
- blbc r12, 1f
- lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector
-
-1: subq r31, 1, r18 // get a -1
- mfpr r25, pt_entInt
-
- srl r18, 42, r18 // shift off low bits of kseg addr
- mtpr r25, exc_addr // load interrupt vector
-
- sll r18, 42, r18 // shift back into position
- or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
-
- hw_rei_spe // done
-
-
- //+
- // The stack is pushed. Need to back out of it all.
- //-
-
-sys_crd_dismiss_interrupt:
- br r31, Call_Pal_Rti
-
-
-// .sbttl sys_crd_scrub_mem
-
- //+
- //
- // sys_crd_scrub_mem
- // called
- // jsr r13, sys$crd_scrub_mem
- // r0 = addr of cache block
- //
- //-
-
-
-
- ALIGN_BLOCK // align for branch target
-sys_crd_scrub_mem:
- // now find error in memory, and attempt to scrub that cache block
- // This routine just scrubs the failing octaword
- // Only need to "touch" one quadword per octaword to accomplish the scrub
- srl r0, 39, r8 // get high bit of bad pa
- blbs r8, 1f // don't attempt fixup on IO space addrs
- nop // needed to align the ldqpl to octaword boundary
- nop // "
-
- ldqpl r8, 0(r0) // attempt to read the bad memory
- // location
- // (Note bits 63:40,3:0 of ei_addr
- // are set to 1, but as long as
- // we are doing a phys ref, should
- // be ok)
- nop // Needed to keep the Ibox from swapping the ldqpl into E1
-
- stqpc r8, 0(r0) // Store it back if it is still there.
- // If store fails, location already
- // scrubbed by someone else
-
- nop // needed to align the ldqpl to octaword boundary
-
- lda r8, 0x20(r31) // flip bit 5 to touch next hexaword
- xor r8, r0, r0
- nop // needed to align the ldqpl to octaword boundary
- nop // "
-
- ldqpl r8, 0(r0) // attempt to read the bad memory
- // location
- // (Note bits 63:40,3:0 of ei_addr
- // are set to 1, but as long as
- // we are doing a phys ref, should
- // be ok)
- nop // Needed to keep the Ibox from swapping the ldqpl into E1
-
- stqpc r8, 0(r0) // Store it back if it is still there.
- // If store fails, location already
- // scrubbed by someone else
-
- lda r8, 0x20(r31) // restore r0 to original address
- xor r8, r0, r0
-
- //at this point, ei_stat could be locked due to a new corr error on the ld,
- //so read ei_stat to unlock AFTER this routine.
-
-// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1
-1: ret r31, (r13) // and back we go
-
-
-// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
-//+
-// Machine check interrupt from the system. Setup and join the
-// regular machine check flow.
-// On exit:
-// pt0 - saved r0
-// pt1 - saved r1
-// pt4 - saved r4
-// pt5 - saved r5
-// pt6 - saved r6
-// pt10 - saved exc_addr
-// pt_misc<47:32> - mchk code
-// pt_misc<31:16> - scb vector
-// r14 - base of Cbox IPRs in IO space
-// MCES<mchk> is set
-//-
- ALIGN_BLOCK
-sys_int_mchk:
- lda r14, mchk_c_sys_hrd_error(r31)
- mfpr r12, exc_addr
-
- addq r14, 1, r14 // Flag as interrupt
- nop
-
- sll r14, 32, r14 // Move mchk code to position
- mtpr r12, pt10 // Stash exc_addr
-
- mfpr r12, pt_misc // Get MCES and scratch
- mtpr r0, pt0 // Stash for scratch
-
- zap r12, 0x3c, r12 // Clear scratch
- blbs r12, sys_double_machine_check // MCHK halt if double machine check
-
- or r12, r14, r12 // Combine mchk code
- lda r14, scb_v_sysmchk(r31) // Get SCB vector
-
- sll r14, 16, r14 // Move SCBv to position
- or r12, r14, r14 // Combine SCBv
-
- bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
- mtpr r14, pt_misc // Save mchk code!scbv!whami!mces
-
- ldah r14, 0xfff0(r31)
- mtpr r1, pt1 // Stash for scratch
-
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r4, pt4
-
- mtpr r5, pt5
-
-#if beh_model
-// .if ne beh_model
- ldah r25, 0xC000(r31) // Get base of demon space
- lda r25, 0x340(r25) // Add interrupt demon offset
-
- ldqp r13, 0(r25) // Read the control register
- nop
-
- and r13, 0x10, r8 // For debug, check that the interrupt is expected
- beq r8, interrupt_not_expected
-
- bic r13, 0x10, r13
- stqp r13, 0(r25) // Ack and clear the interrupt
-// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow
- .endc
-#endif
-
- mtpr r6, pt6
- br r31, sys_mchk_collect_iprs // Join common machine check flow
-
-
-// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code"
-//+
-//sys$int_perf_cnt
-//
-// A performance counter interrupt has been detected. The stack has been pushed.
-// IPL and PS are updated as well.
-//
-// on exit to interrupt entry point ENTINT::
-// a0 = osfint$c_perf
-// a1 = scb$v_perfmon (650)
-// a2 = 0 if performance counter 0 fired
-// a2 = 1 if performance counter 1 fired
-// a2 = 2 if performance counter 2 fired
-// (if more than one counter overflowed, an interrupt will be
-// generated for each counter that overflows)
-//
-//
-//-
- ALIGN_BLOCK
-sys_int_perf_cnt: // Performance counter interrupt
- lda r17, scb_v_perfmon(r31) // a1 to interrupt vector
- mfpr r25, pt_entint
-
- lda r16, osfint_c_perf(r31) // a0 to perf counter code
- mtpr r25, exc_addr
-
- //isolate which perf ctr fired, load code in a2, and ack
- mfpr r25, isr
- or r31, r31, r18 // assume interrupt was pc0
-
- srl r25, isr_v_pc1, r25 // isolate
- cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14
-
- srl r25, 1, r25 // get pc2
- cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14
-
- lda r25, 1(r31) // get a one
- sll r25, r18, r25
-
- sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt
- mtpr r25, hwint_clr
-
- hw_rei_spe
-
-
-
- ALIGN_BLOCK
-// .sbttl "System specific RESET code"
-//+
-// RESET code
-// On entry:
-// r1 = pal_base +8
-//
-// Entry state on trap:
-// r0 = whami
-// r2 = base of scratch area
-// r3 = halt code
-// and the following 3 if init_cbox is enabled:
-// r5 = sc_ctl
-// r6 = bc_ctl
-// r7 = bc_cnfg
-//
-// Entry state on switch:
-// r17 - new PC
-// r18 - new PCBB
-// r19 - new VPTB
-//
-//-
-
-#if rax_mode==0
- .globl sys_reset
-sys_reset:
-// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load
- mtpr r31, itb_ia // clear the ITB
- mtpr r31, dtb_ia // clear the DTB
-
- lda r1, -8(r1) // point to start of code
- mtpr r1, pal_base // initialize PAL_BASE
-
- // Interrupts
- mtpr r31, astrr // stop ASTs
- mtpr r31, aster // stop ASTs
- mtpr r31, sirr // clear software interrupts
-
- mtpr r0, pt1 // r0 is whami (unless we entered via swp)
-
-//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
- ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
-
-#if disable_crd == 0
-// .if eq disable_crd
- bis r31, 1, r0
- sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable>
- or r0, r1, r1 // Set the bit
-#endif
-
- mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable,
- // super page enabled, correct read per assembly option
-
- // Mbox/Dcache init
-//orig lda r1, <1@<mcsr$v_sp1>>(r31)
- lda r1,BIT(mcsr_v_sp1)(zero)
-
- mtpr r1, mcsr // MCSR - Super page enabled
- lda r1, BIT(dc_mode_v_dc_ena)(r31)
- ALIGN_BRANCH
-// mtpr r1, dc_mode // turn Dcache on
- nop
-
- mfpr r31, pt0 // No Mbox instr in 1,2,3,4
- mfpr r31, pt0
- mfpr r31, pt0
- mfpr r31, pt0
- mtpr r31, dc_flush // flush Dcache
-
- // build PS (IPL=7,CM=K,VMM=0,SW=0)
- lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7
- lda r1, 0x1F(r31)
- mtpr r1, ipl // set internal <ipl>=1F
- mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy
- mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy
-
- // Create the PALtemp pt_intmask -
- // MAP:
- // OSF IPL EV5 internal IPL(hex) note
- // 0 0
- // 1 1
- // 2 2
- // 3 14 device
- // 4 15 device
- // 5 16 device
- // 6 1E device,performance counter, powerfail
- // 7 1F
- //
-
- ldah r1, 0x1f1E(r31) // Create upper lw of int_mask
- lda r1, 0x1615(r1)
-
- sll r1, 32, r1
- ldah r1, 0x1402(r1) // Create lower lw of int_mask
-
- lda r1, 0x0100(r1)
- mtpr r1, pt_intmask // Stash in PALtemp
-
- // Unlock a bunch of chip internal IPRs
- mtpr r31, exc_sum // clear out exeception summary and exc_mask
- mfpr r31, va // unlock va, mmstat
-//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
- lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
-
- mtpr r8, icperr_stat // Clear Icache parity error & timeout status
-//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
- lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
-
- mtpr r8, dcperr_stat // Clear Dcache parity error status
-
- rc r0 // clear intr_flag
- mtpr r31, pt_trap
-
- mfpr r0, pt_misc
- srl r0, pt_misc_v_switch, r1
- blbs r1, sys_reset_switch // see if we got here from swppal
-
- // Rest of the "real" reset flow
- // ASN
- mtpr r31, dtb_asn
- mtpr r31, itb_asn
-
- lda r1, 0x67(r31)
- sll r1, hwint_clr_v_pc0c, r1
- mtpr r1, hwint_clr // Clear hardware interrupt requests
-
- lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
- mfpr r0, pt1 // get whami
- insbl r0, 1, r0 // isolate whami in correct pt_misc position
- or r0, r1, r1 // combine whami and mces
- mtpr r1, pt_misc // store whami and mces, swap bit clear
-
- zapnot r3, 1, r0 // isolate halt code
- mtpr r0, pt0 // save entry type
-
- // Cycle counter
- or r31, 1, r9 // get a one
- sll r9, 32, r9 // shift to <32>
- mtpr r31, cc // clear Cycle Counter
- mtpr r9, cc_ctl // clear and enable the Cycle Counter
- mtpr r31, pt_scc // clear System Cycle Counter
-
-
- // Misc PALtemps
- mtpr r31, maf_mode // no mbox instructions for 3 cycles
- or r31, 1, r1 // get bogus scbb value
- mtpr r1, pt_scbb // load scbb
- mtpr r31, pt_prbr // clear out prbr
-#ifdef SIMOS
-// or zero,kludge_initial_pcbb,r1
- GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
-#else
- mfpr r1, pal_base
-//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
- GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
-#endif
- mtpr r1, pt_pcbb // load pcbb
- lda r1, 2(r31) // get a two
- sll r1, 32, r1 // gen up upper bits
- mtpr r1, mvptbr
- mtpr r1, ivptbr
- mtpr r31, pt_ptbr
- // Performance counters
- mtpr r31, pmctr
-
-#if init_cbox != 0
-// .if ne init_cbox
- // Only init the Scache and the Bcache if there have been no previous
- // cacheable dstream loads or stores.
- //
- // Inputs:
- // r5 - sc_ctl
- // r6 - bc_ctl
- // r7 - bc_cnfg
-
- ldah r0, 0xfff0(r31)
- zap r0, 0xE0, r0 // Get Cbox IPR base
- ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
-temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
- lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
- sll r20, 1, r20
-temp = 0x017441 // default bc_config
- get_addr r21, temp, r31 // create default bc_config
- lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
-
-// XXX bugnion pvc$jsr scbcctl, bsr=1
- bsr r10, set_sc_bc_ctl
- update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
- store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area
-// .endc
-#endif
- // Clear pmctr_ctl in impure area
-
-#ifndef SIMOS
- // can't assemble ???
- update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed
-#endif
-
- ldah r14, 0xfff0(r31)
- zap r14, 0xE0, r14 // Get Cbox IPR base
-#ifndef SIMOS
- ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr
- ldqp r31, ei_stat(r14)
- ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
-#endif
- GET_IMPURE(r13)
- stqpc r31, 0(r13) // Clear lock_flag
-
- mfpr r0, pt0 // get entry type
- br r31, sys_enter_console // enter the cosole
-
-#endif /* rax_mode == 0 */
-
-
-
-
-//.if ne rax_mode
-#if rax_mode != 0
-
- // For RAX:
- // r0 - icsr at first, then used for cbox ipr base offset
- // r2 - mcsr
- // r3 - dc_mode
- // r4 - maf_mode
- // r5 - sc_ctl
- // r6 - bc_ctl
- // r7 - bc_cnfg
- .globl sys_reset
-sys_reset:
- mtpr r31, ev5__dtb_cm // set mbox mode to kernel
- mtpr r31, ev5__ps // set Ibox mode to kernel - E1
-
- mtpr r0, ev5__icsr // Load ICSR - E1
-
- mtpr r2, ev5__mcsr
- mfpr r8, pal_base
-
- ldah r0, 0xfff0(r31)
- zap r0, 0xE0, r0 // Get Cbox IPR base
-
- mtpr r31, ev5__itb_asn // clear asn - E1
- ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
-
-temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
- lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
- sll r20, 1, r20
-
-temp = 0x017441 // default bc_config
- get_addr r21, temp, r31 // create default bc_config
- lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
-
-// XXX bugnion pvc$jsr scbcctl, bsr=1
- bsr r10, set_sc_bc_ctl
- update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2
- store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl
- store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow
-
- mtpr r3, ev5__dc_mode // write dc_mode
- mtpr r31, ev5__dc_flush // flush dcache
-
- mtpr r31, ev5__exc_sum // clear exc_sum - E1
- mtpr r31, ev5__exc_mask // clear exc_mask - E1
-
- ldah r2, 4(r31) // For EXC_ADDR
- mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex)
-
- mtpr r31, ev5__sirr // Clear SW interrupts (for ISP)
- mtpr r4, ev5__maf_mode // write maf_mode
-
- mtpr r31, ev5__alt_mode // set alt_mode to kernel
- mtpr r31, ev5__itb_ia // clear ITB - E1
-
- lda r1, 0x1F(r31) // For IPL
- mtpr r1, ev5__ipl // IPL to 1F
-
- mtpr r31, ev5__hwint_clr // clear hardware interrupts
- mtpr r31, ev5__aster // disable AST interrupts
-
- mtpr r31, ev5__astrr // clear AST requests
- mtpr r31, ev5__dtb_ia // clear dtb
-
- nop
- mtpr r31, pt_trap
-
- srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000
- sll r9, 32, r9
-
- lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set
- nop
-
- mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000
- mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000
-
- mtpr r2, dtb_tag
- mtpr r9, itb_pte
-
- and r31, r31, r0 // clear deposited registers, note: r2 already overwritten
- and r31, r31, r3
-
- and r31, r31, r4
- and r31, r31, r5
-
- and r31, r31, r6
- and r31, r31, r7
-
- hw_rei //May need to be a rei_stall since
- //we write to TB's above
- //However, it currently works ok. (JH)
-
-
-// .endc
-#endif /*rax_mode != 0 */
-
-
- // swppal entry
- // r0 - pt_misc
- // r17 - new PC
- // r18 - new PCBB
- // r19 - new VPTB
-sys_reset_switch:
- or r31, 1, r9
- sll r9, pt_misc_v_switch, r9
- bic r0, r9, r0 // clear switch bit
- mtpr r0, pt_misc
-
- rpcc r1 // get cyccounter
-
- ldqp r22, osfpcb_q_fen(r18) // get new fen/pme
- ldlp r23, osfpcb_l_cc(r18) // get cycle counter
- ldlp r24, osfpcb_l_asn(r18) // get new asn
-
-
- ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr
- sll r25, page_offset_size_bits, r25 // convert pfn to pa
- mtpr r25, pt_ptbr // load the new mmptr
- mtpr r18, pt_pcbb // set new pcbb
-
- bic r17, 3, r17 // clean use pc
- mtpr r17, exc_addr // set new pc
- mtpr r19, mvptbr
- mtpr r19, ivptbr
-
- ldqp r30, osfpcb_q_Usp(r18) // get new usp
- mtpr r30, pt_usp // save usp
-
- sll r24, dtb_asn_v_asn, r8
- mtpr r8, dtb_asn
- sll r24, itb_asn_v_asn, r24
- mtpr r24, itb_asn
-
- mfpr r25, icsr // get current icsr
- lda r24, 1(r31)
- sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position
- bic r25, r24, r25 // clean out old fpe
- and r22, 1, r22 // isolate new fen bit
- sll r22, icsr_v_fpe, r22
- or r22, r25, r25 // or in new fpe
- mtpr r25, icsr // update ibox ipr
-
- subl r23, r1, r1 // gen new cc offset
- insll r1, 4, r1 // << 32
- mtpr r1, cc // set new offset
-
- or r31, r31, r0 // set success
- ldqp r30, osfpcb_q_Ksp(r18) // get new ksp
- mfpr r31, pt0 // stall
- hw_rei_stall
-
-// .sbttl "SYS_MACHINE_CHECK - Machine check PAL"
- ALIGN_BLOCK
-//+
-//sys$machine_check
-// A machine_check trap has occurred. The Icache has been flushed.
-//
-//-
-
-EXPORT(sys_machine_check)
- // Need to fill up the refill buffer (32 instructions) and
- // then flush the Icache again.
- // Also, due to possible 2nd Cbox register file write for
- // uncorrectable errors, no register file read or write for 7 cycles.
-
- nop
- mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later
-
- nop
- nop
-
- nop
- nop
-
- nop
- nop
-
- nop
- nop
- // 10 instructions// 5 cycles
-
- nop
- nop
-
- nop
- nop
-
- // Register file can now be written
- lda r0, scb_v_procmchk(r31) // SCB vector
- mfpr r13, pt_mces // Get MCES
- sll r0, 16, r0 // Move SCBv to correct position
-// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit
- bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
-
-
- zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word
- mtpr r14, pt_mces
- // 20 instructions
-
- nop
- or r14, r0, r14 // Insert new SCB vector
- lda r0, mchk_c_proc_hrd_error(r31) // MCHK code
- mfpr r12, exc_addr
-
- sll r0, 32, r0 // Move MCHK code to correct position
- mtpr r4, pt4
- or r14, r0, r14 // Insert new MCHK code
- mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv
-
- ldah r14, 0xfff0(r31)
- mtpr r1, pt1 // Stash for scratch - 30 instructions
-
- zap r14, 0xE0, r14 // Get Cbox IPR base
- mtpr r12, pt10 // Stash exc_addr
-
-
-
- mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed.
- blbs r13, sys_double_machine_check // MCHK halt if double machine check
-
- mtpr r6, pt6
- mtpr r5, pt5
-
- // Look for the powerfail cases here....
- mfpr r4, isr
- srl r4, isr_v_pfl, r4
- blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending
- lda r4, 0xffc4(r31) // get GBUS$MISCR address bits
- sll r4, 24, r4 // shift to proper position
- ldqp r4, 0(r4) // read GBUS$MISCR
- srl r4, 5, r4 // isolate bit <5>
- blbc r4, sys_mchk_collect_iprs // skip if already cleared
- // No missed CFAIL mchk
- lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits
- sll r5, 24, r5 // shift to proper position
- lda r6, 0x40(r31) // get bit <6> mask
- ldqp r4, 0(r5) // read GBUS$SERNUM
- or r4, r6, r6 // set bit <6>
- stqp r6, 0(r5) // clear GBUS$SERNUM<6>
- mb
- mb
-
-
- //+
- // Start to collect the IPRs. Common entry point for mchk flows.
- //
- // Current state:
- // pt0 - saved r0
- // pt1 - saved r1
- // pt4 - saved r4
- // pt5 - saved r5
- // pt6 - saved r6
- // pt10 - saved exc_addr
- // pt_misc<47:32> - mchk code
- // pt_misc<31:16> - scb vector
- // r14 - base of Cbox IPRs in IO space
- // r0, r1, r4, r5, r6, r12, r13, r25 - available
- // r8, r9, r10 - available as all loads are physical
- // MCES<mchk> is set
- //
- //-
-
-EXPORT(sys_mchk_collect_iprs)
- mb // MB before reading Scache IPRs
- mfpr r1, icperr_stat
-
- mfpr r8, dcperr_stat
- mtpr r31, dc_flush // Flush the Dcache
-
- mfpr r31, pt0 // Pad Mbox instructions from dc_flush
- mfpr r31, pt0
- nop
- nop
-
- ldqp r9, sc_addr(r14) // SC_ADDR IPR
- bis r9, r31, r31 // Touch ld to make sure it completes before
- // read of SC_STAT
- ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR
-
- ldqp r12, ei_addr(r14) // EI_ADDR IPR
- ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR
- ldqp r0, fill_syn(r14) // FILL_SYN IPR
- bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT
- bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT
- ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
- ldqp r31, ei_stat(r14) // Read again to insure it is unlocked
-
-
-
-
- //+
- // Look for nonretryable cases
- // In this segment:
- // r5<0> = 1 means retryable
- // r4, r6, and r14 are available for scratch
- //
- //-
-
-
- bis r31, r31, r5 // Clear local retryable flag
- srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits
-
- lda r4, 1(r31)
- sll r4, icperr_stat_v_tmr, r4
- and r1, r4, r4 // Timeout reset
- bne r4, sys_cpu_mchk_not_retryable
-
- and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked
- bne r4, sys_cpu_mchk_not_retryable
-
- lda r4, 1(r31)
- sll r4, sc_stat_v_sc_scnd_err, r4
- and r10, r4, r4 // 2nd Scache error occurred
- bne r4, sys_cpu_mchk_not_retryable
-
-
- bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control
- // Parity Error, Interface Parity Error, 2nd Error
-
- and r25, r4, r4
- bne r4, sys_cpu_mchk_not_retryable
-
-// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
- bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
- and r25, r4, r4 // Isolate the Uncorrectable Error Bit
-// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
- bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
- cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error
- bne r4, sys_cpu_mchk_not_retryable
-
- lda r4, 7(r31)
- and r10, r4, r4 // Isolate the Scache Tag Parity Error bits
- bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable
-
-
- lda r4, 0x7f8(r31)
- and r10, r4, r4 // Isolate the Scache Data Parity Error bits
- srl r10, sc_stat_v_cbox_cmd, r6
- and r6, 0x1f, r6 // Isolate Scache Command field
- subq r6, 1, r6 // Scache Iread command = 1
- cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error
- bne r4, sys_cpu_mchk_not_retryable
-
- // Look for the system unretryable cases here....
-
- mfpr r4, isr // mchk_interrupt pin asserted
- srl r4, isr_v_mck, r4
- blbs r4, sys_cpu_mchk_not_retryable
-
-
-
- //+
- // Look for retryable cases
- // In this segment:
- // r5<0> = 1 means retryable
- // r6 - holds the mchk code
- // r4 and r14 are available for scratch
- //
- //-
-
-
- // Within the chip, the retryable cases are Istream errors
- lda r4, 3(r31)
- sll r4, icperr_stat_v_dpe, r4
- and r1, r4, r4
- cmovne r4, 1, r5 // Retryable if just Icache parity error
-
-
- lda r4, 0x7f8(r31)
- and r10, r4, r4 // Isolate the Scache Data Parity Error bits
- srl r10, sc_stat_v_cbox_cmd, r14
- and r14, 0x1f, r14 // Isolate Scache Command field
- subq r14, 1, r14 // Scache Iread command = 1
- cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set
- cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread
- bis r4, r5, r5 // Accumulate
-
-
- bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
- and r25, r4, r4 // Isolate the Uncorrectable Error Bit
- and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
- cmovne r4, 1, r4 // r4 = 1 if uncorr error
- cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread
- bis r4, r5, r5 // Accumulate
-
- mfpr r6, pt_misc
- extwl r6, 4, r6 // Fetch mchk code
- bic r6, 1, r6 // Clear flag from interrupt flow
- cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code
-
-
-
- // In the system, the retryable cases are ...
- // (code here handles beh model read NXM)
-
-#if beh_model != 0
-// .if ne beh_model
- ldah r4, 0xC000(r31) // Get base of demon space
- lda r4, 0x550(r4) // Add NXM demon flag offset
-
- ldqp r4, 0(r4) // Read the demon register
- lda r14, mchk_c_read_nxm(r31)
- cmovlbs r4, r14, r6 // Set mchk code if read NXM
- cmovlbs r4, 1, r4
- bis r4, r5, r5 // Accumulate retry bit
-#endif
-
-
- //+
- // Write the logout frame
- //
- // Current state:
- // r0 - fill_syn
- // r1 - icperr_stat
- // r4 - available
- // r5<0> - retry flag
- // r6 - mchk code
- // r8 - dcperr_stat
- // r9 - sc_addr
- // r10 - sc_stat
- // r12 - ei_addr
- // r13 - bc_tag_addr
- // r14 - available
- // r25 - ei_stat (shifted)
- // pt0 - saved r0
- // pt1 - saved r1
- // pt4 - saved r4
- // pt5 - saved r5
- // pt6 - saved r6
- // pt10 - saved exc_addr
- //
- //-
-
-sys_mchk_write_logout_frame:
- // Get base of the logout area.
- GET_IMPURE(r14) // addr of per-cpu impure area
- GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)
-
- // Write the first 2 quadwords of the logout area:
-
- sll r5, 63, r5 // Move retry flag to bit 63
- lda r4, mchk_size(r5) // Combine retry flag and frame size
- stqp r4, mchk_flag(r14) // store flag/frame size
- lda r4, mchk_sys_base(r31) // sys offset
- sll r4, 32, r4
- lda r4, mchk_cpu_base(r4) // cpu offset
- stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame
-
- //+
- // Write the mchk code to the logout area
- // Write error IPRs already fetched to the logout area
- // Restore some GPRs from PALtemps
- //-
-
- mfpr r5, pt5
- stqp r6, mchk_mchk_code(r14)
- mfpr r4, pt4
- stqp r1, mchk_ic_perr_stat(r14)
- mfpr r6, pt6
- stqp r8, mchk_dc_perr_stat(r14)
- mfpr r1, pt1
- stqp r9, mchk_sc_addr(r14)
- stqp r10, mchk_sc_stat(r14)
- stqp r12, mchk_ei_addr(r14)
- stqp r13, mchk_bc_tag_addr(r14)
- stqp r0, mchk_fill_syn(r14)
- mfpr r0, pt0
- sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position
- // retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
- ldah r13, 0xfff0(r31)
- zapnot r13, 0x1f, r13
- ldqp r13, ei_stat(r13)
- sll r13, 64-ei_stat_v_bc_tperr, r13
- srl r13, 64-ei_stat_v_bc_tperr, r13
- or r25, r13, r25
- stqp r25, mchk_ei_stat(r14)
-
-
-
-
- //+
- // complete the CPU-specific part of the logout frame
- //-
-
-#ifndef SIMOS
- // cant' assemble.Where is the macro ?
- mchk_logout mm_stat
- mchk_logout va // Unlocks VA and MM_STAT
- mchk_logout isr
- mchk_logout icsr
- mchk_logout pal_base
- mchk_logout exc_mask
- mchk_logout exc_sum
-#endif
-
- ldah r13, 0xfff0(r31)
- zap r13, 0xE0, r13 // Get Cbox IPR base
- ldqp r13, ld_lock(r13) // Get ld_lock IPR
- stqp r13, mchk_ld_lock(r14) // and stash it in the frame
-
- //+
- // complete the PAL-specific part of the logout frame
- //-
-#ifdef vms
- t = 0
- .repeat 24
- pt_mchk_logout \t
- t = t + 1
- .endr
-#endif
-#ifndef SIMOS
- //can't assemble ?
- pt_mchk_logout 0
- pt_mchk_logout 1
- pt_mchk_logout 2
- pt_mchk_logout 3
- pt_mchk_logout 4
- pt_mchk_logout 5
- pt_mchk_logout 6
- pt_mchk_logout 7
- pt_mchk_logout 8
- pt_mchk_logout 9
- pt_mchk_logout 10
- pt_mchk_logout 11
- pt_mchk_logout 12
- pt_mchk_logout 13
- pt_mchk_logout 14
- pt_mchk_logout 15
- pt_mchk_logout 16
- pt_mchk_logout 17
- pt_mchk_logout 18
- pt_mchk_logout 19
- pt_mchk_logout 20
- pt_mchk_logout 21
- pt_mchk_logout 22
- pt_mchk_logout 23
-#endif
-
-
- //+
- // Log system specific info here
- //-
-
-#if alpha_fw != 0
-// .if ne alpha_fw
-storeTLEP_:
- lda r13, 0xffc4(r31) // Get GBUS$MISCR address
- sll r13, 24, r13
- ldqp r13, 0(r13) // Read GBUS$MISCR
- sll r13, 16, r13 // shift up to proper field
- mfpr r8, pt_whami // get our node id
- extbl r8, 1, r8 // shift to bit 0
- or r13, r8, r13 // merge MISCR and WHAMI
- stlp r13, mchk$gbus(r14) // write to logout area
- srl r8, 1, r8 // shift off cpu number
-
- Get_TLSB_Node_Address r8,r13 // compute our nodespace address
-
- OSFmchk_TLEPstore tldev, tlsb=1
- OSFmchk_TLEPstore tlber, tlsb=1, clr=1
- OSFmchk_TLEPstore tlcnr, tlsb=1
- OSFmchk_TLEPstore tlvid, tlsb=1
- OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1
- OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1
- OSFmchk_TLEPstore tlmodconfig
- OSFmchk_TLEPstore tlepaerr, clr=1
- OSFmchk_TLEPstore tlepderr, clr=1
- OSFmchk_TLEPstore tlepmerr, clr=1
- OSFmchk_TLEPstore tlintrmask0
- OSFmchk_TLEPstore tlintrmask1
- OSFmchk_TLEPstore tlintrsum0
- OSFmchk_TLEPstore tlintrsum1
- OSFmchk_TLEPstore tlep_vmg
-// .endc
-#endif /*alpha_fw != 0 */
- // Unlock IPRs
- lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
- mtpr r8, dcperr_stat // Clear Dcache parity error status
-
- lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
- mtpr r8, icperr_stat // Clear Icache parity error & timeout status
-
-1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value
- GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value
- and r0, r8, r0 // compare
- beq r0, 2f // check next case if nothing set
- lda r0, mchk_c_retryable_ird(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value
- GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value
- and r0, r8, r0 // compare
- beq r0, 3f // check next case if nothing set
- lda r0, mchk_c_dcperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value
- GET_ADDR(r0,0x107ff,r31) // get SC_STAT value
- and r0, r8, r0 // compare
- beq r0, 4f // check next case if nothing set
- lda r0, mchk_c_scperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
- GET_ADDR(r0,0x30000000,r31) // get EI_STAT value
- and r0, r8, r0 // compare
- beq r0, 5f // check next case if nothing set
- lda r0, mchk_c_bcperr(r31) // set new MCHK code
- br r31, do_670 // setup new vector
-
-5: ldlp r8, mchk_tlber(r14) // get TLBER value
- GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value
- sll r0, 16, r0 // shift into proper position
- GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value
- or r0, r1, r0 // merge mask values
- and r0, r8, r0 // compare
- beq r0, 6f // check next case if nothing set
- GET_ADDR(r0, 0xfff0, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
- GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value
- and r0, r8, r0 // compare
- beq r0, 7f // check next case if nothing set
- GET_ADDR(r0, 0xfffa, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value
- GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value
- and r0, r8, r0 // compare
- beq r0, 8f // check next case if nothing set
- GET_ADDR(r0, 0xfffb, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value
- GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value
- and r0, r8, r0 // compare
- beq r0, 9f // check next case if nothing set
- GET_ADDR(r0, 0xfffc, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
- GET_ADDR(r0,0xb,r31) // get EI_STAT mask value
- sll r0, 32, r0 // shift to upper lw
- and r0, r8, r0 // compare
- beq r0, 1f // check next case if nothing set
- GET_ADDR(r0,0xfffd,r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
- GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value
- and r0, r8, r0 // compare
- beq r0, cont_logout_frame // check next case if nothing set
- GET_ADDR(r0, 0xfffe, r31) // set new MCHK code
- br r31, do_660 // setup new vector
-
-do_670: lda r8, scb_v_procmchk(r31) // SCB vector
- br r31, do_6x0_cont
-do_660: lda r8, scb_v_sysmchk(r31) // SCB vector
-do_6x0_cont:
- sll r8, 16, r8 // shift to proper position
- mfpr r1, pt_misc // fetch current pt_misc
- GET_ADDR(r4,0xffff, r31) // mask for vector field
- sll r4, 16, r4 // shift to proper position
- bic r1, r4, r1 // clear out old vector field
- or r1, r8, r1 // merge in new vector
- mtpr r1, pt_misc // save new vector field
- stlp r0, mchk_mchk_code(r14) // save new mchk code
-
-cont_logout_frame:
- // Restore some GPRs from PALtemps
- mfpr r0, pt0
- mfpr r1, pt1
- mfpr r4, pt4
-
- mfpr r12, pt10 // fetch original PC
- blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal
-
-//XXXbugnion pvc_jsr armc, bsr=1
- bsr r12, sys_arith_and_mchk // go check for and deal with arith trap
-
- mtpr r31, exc_sum // Clear Exception Summary
-
- mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc
- stqp r25, mchk_exc_addr(r14)
-
- //+
- // Set up the km trap
- //-
-
-
-sys_post_mchk_trap:
- mfpr r25, pt_misc // Check for flag from mchk interrupt
- extwl r25, 4, r25
- blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
-
- bis r14, r31, r12 // stash pointer to logout area
- mfpr r14, pt10 // get exc_addr
-
- sll r11, 63-3, r25 // get mode to msb
- bge r25, 3f
-
- mtpr r31, dtb_cm
- mtpr r31, ev5__ps
-
- mtpr r30, pt_usp // save user stack
- mfpr r30, pt_ksp
-
-3:
- lda sp, 0-osfsf_c_size(sp) // allocate stack space
- nop
-
- stq r18, osfsf_a2(sp) // a2
- stq r11, osfsf_ps(sp) // save ps
-
- stq r14, osfsf_pc(sp) // save pc
- mfpr r25, pt_entint // get the VA of the interrupt routine
-
- stq r16, osfsf_a0(sp) // a0
- lda r16, osfint_c_mchk(r31) // flag as mchk in a0
-
- stq r17, osfsf_a1(sp) // a1
- mfpr r17, pt_misc // get vector
-
- stq r29, osfsf_gp(sp) // old gp
- mtpr r25, exc_addr //
-
- or r31, 7, r11 // get new ps (km, high ipl)
- subq r31, 1, r18 // get a -1
-
- extwl r17, 2, r17 // a1 <- interrupt vector
- bis r31, ipl_machine_check, r25
-
- mtpr r25, ipl // Set internal ipl
- srl r18, 42, r18 // shift off low bits of kseg addr
-
- sll r18, 42, r18 // shift back into position
- mfpr r29, pt_kgp // get the kern r29
-
- or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
- hw_rei_spe // out to interrupt dispatch routine
-
-
- //+
- // The stack is pushed. Load up a0,a1,a2 and vector via entInt
- //
- //-
- ALIGN_BRANCH
-sys_mchk_stack_done:
- lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
- lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector
-
- subq r31, 1, r18 // get a -1
- mfpr r25, pt_entInt
-
- srl r18, 42, r18 // shift off low bits of kseg addr
- mtpr r25, exc_addr // load interrupt vector
-
- sll r18, 42, r18 // shift back into position
- or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
-
- hw_rei_spe // done
-
-
- ALIGN_BRANCH
-sys_cpu_mchk_not_retryable:
- mfpr r6, pt_misc
- extwl r6, 4, r6 // Fetch mchk code
- br r31, sys_mchk_write_logout_frame //
-
-
-
-//+
-//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
-// already set. We will now double machine check halt.
-//
-// pt0 - old R0
-//
-//+
-
-EXPORT(sys_double_machine_check)
-#ifndef SIMOS
- pvc$jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_dbl_mchk(r31)
- br r31, sys_enter_console
-
-//+
-//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
-// a PAL PC. We will now machine check halt.
-//
-// pt0 - old R0
-//
-//+
-sys_machine_check_while_in_pal:
- stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written
-
-#ifndef SIMOS
- pvc$jsr updpcb, bsr=1
- bsr r0, pal_update_pcb // update the pcb
-#endif
- lda r0, hlt_c_mchk_from_pal(r31)
- br r31, sys_enter_console
-
-
-//ARITH and MCHK
-// Check for arithmetic errors and build trap frame,
-// but don't post the trap.
-// on entry:
-// pt10 - exc_addr
-// r12 - return address
-// r14 - logout frame pointer
-// r13 - available
-// r8,r9,r10 - available except across stq's
-// pt0,1,6 - available
-//
-// on exit:
-// pt10 - new exc_addr
-// r17 = exc_mask
-// r16 = exc_sum
-// r14 - logout frame pointer
-//
- ALIGN_BRANCH
-sys_arith_and_mchk:
- mfpr r13, ev5__exc_sum
- srl r13, exc_sum_v_swc, r13
- bne r13, handle_arith_and_mchk
-
-// XXX bugnion pvc$jsr armc, bsr=1, dest=1
- ret r31, (r12) // return if no outstanding arithmetic error
-
-handle_arith_and_mchk:
- mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
- // no virt ref for next 2 cycles
- mtpr r14, pt0
-
- mtpr r1, pt1 // get a scratch reg
- and r11, osfps_m_mode, r1 // get mode bit
-
- bis r11, r31, r25 // save ps
- beq r1, 1f // if zero we are in kern now
-
- bis r31, r31, r25 // set the new ps
- mtpr r30, pt_usp // save user stack
-
- mfpr r30, pt_ksp // get kern stack
-1:
- mfpr r14, exc_addr // get pc into r14 in case stack writes fault
-
- lda sp, 0-osfsf_c_size(sp) // allocate stack space
- mtpr r31, ev5__ps // Set Ibox current mode to kernel
-
- mfpr r1, pt_entArith
- stq r14, osfsf_pc(sp) // save pc
-
- stq r17, osfsf_a1(sp)
- mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
-
- stq r29, osfsf_gp(sp)
- stq r16, osfsf_a0(sp) // save regs
-
- bis r13, r31, r16 // move exc_sum to r16
- stq r18, osfsf_a2(sp)
-
- stq r11, osfsf_ps(sp) // save ps
- mfpr r29, pt_kgp // get the kern gp
-
- mfpr r14, pt0 // restore logout frame pointer from pt0
- bis r25, r31, r11 // set new ps
-
- mtpr r1, pt10 // Set new PC
- mfpr r1, pt1
-
-// XXX bugnion pvc$jsr armc, bsr=1, dest=1
- ret r31, (r12) // return if no outstanding arithmetic error
-
-
-
-// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"
-
- ALIGN_BLOCK
-
-// SYS$enter_console
-//
-// Entry:
-// Entered when PAL wants to enter the console.
-// usually as the result of a HALT instruction or button,
-// or catastrophic error.
-//
-// Regs on entry...
-//
-// R0 = halt code
-// pt0 <- r0
-//
-// Function:
-//
-// Save all readable machine state, and "call" the console
-//
-// Returns:
-//
-//
-// Notes:
-//
-// In these routines, once the save state routine has been executed,
-// the remainder of the registers become scratchable, as the only
-// "valid" copy of them is the "saved" copy.
-//
-// Any registers or PTs that are modified before calling the save
-// routine will have there data lost. The code below will save all
-// state, but will loose pt 0,4,5.
-//
-//-
-
-EXPORT(sys_enter_console)
- mtpr r1, pt4
- mtpr r3, pt5
-#ifdef SIMOS
- subq r31, 1, r1
- sll r1, 42, r1
- ldah r1, 1(r1)
-#else /* SIMOS */
- lda r3, pal_enter_console_ptr(r31) //find stored vector
- ldqp r1, 0(r3)
-#endif /* SIMOS */
-
-#ifdef SIMOS
- /* taken from scrmax, seems like the obvious thing to do */
- mtpr r1, exc_addr
- mfpr r1, pt4
- mfpr r3, pt5
- STALL
- STALL
- hw_rei_stall
-#else
- pvc$violate 1007
- jmp r31, (r1) // off to common routine
-#endif
-
-
-// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
-//+
-// sys$exit_console
-//
-// Entry:
-// Entered when console wants to reenter PAL.
-// usually as the result of a CONTINUE.
-//
-//
-// Regs' on entry...
-//
-//
-// Function:
-//
-// Restore all readable machine state, and return to user code.
-//
-//
-//
-//-
- ALIGN_BLOCK
-sys_exit_console:
- //Disable physical mode:
-#if enable_physical_console != 0
-// .if ne enable_physical_console
- mfpr r25, pt_ptbr
- bic r25, 1, r25 // clear physical console flag
- mtpr r25, pt_ptbr
-#endif
-
- GET_IMPURE(r1)
-
- // clear lock and intr_flags prior to leaving console
- rc r31 // clear intr_flag
- // lock flag cleared by restore_state
-#ifndef SIMOS
- pvc$jsr rststa, bsr=1
- bsr r3, pal_restore_state // go restore all state
- // note, R1 and R3 are NOT restored
- // by restore_state.
-#endif
- // TB's have been flushed
-
- ldqp r3, (cns_gpr+(8*3))(r1) // restore r3
- ldqp r1, (cns_gpr+8)(r1) // restore r1
- hw_rei_stall // back to user
-
-#if turbo_pcia_intr_fix != 0
-// .if ne turbo_pcia_intr_fix
-check_pcia_intr:
- mfpr r14, pt14 // fetch saved PCIA interrupt info
- beq r14, check_done // don't bother checking if no info
- mfpr r13, ipl // check the current IPL
- bic r13, 3, r25 // isolate ipl<5:2>
- cmpeq r25, 0x14, r25 // is it an I/O interrupt?
- beq r25, check_done // no, return
- and r13, 3, r25 // get I/O interrupt index
- extbl r14, r25, r13 // extract info for this interrupt
- beq r13, check_done // if no info, return
-
- // This is an RTI from a PCIA interrupt
- lda r12, 1(r31) // get initial bit mask
- sll r12, r25, r25 // shift to select interrupt index
- zap r14, r25, r14 // clear out info from this interrupt
- mtpr r14, pt14 // and save it
-
- and r13, 3, r25 // isolate HPC field
- subq r25, 1, r25 // subtract 1 to get HPC number
- srl r13, 2, r13 // generate base register address
- sll r13, 6, r13 // get slot/hose address bits
- lda r13, 0x38(r13) // insert other high bits
- sll r13, 28, r13 // shift high bits into position
-
- // Read the IPROGx register
- sll r25, 21, r14 // HPC address bit position
- or r13, r14, r14 // add in upper bits
- lda r14, 0x400(r14) // add in lower bits
- ldqp r14, 0(r14) // read IPROG
- srl r14, 4, r12 // check the In Progress bit
- blbc r12, 1f // skip if none in progress
- and r14, 0xf, r14 // isolate interrupt source
- lda r12, 1(r31) // make initial mask
- sll r12, r14, r14 // shift to make new intr source mask
- br r31, 2f
- // Write the SMPLIRQx register
-1: or r31, r31, r14 // default interrupt source mask
-2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data
- bic r12, r14, r12 // clear any interrupts in progres
-//orig lda r14, <0xbffc@-2>(r31) // get register address bits
- lda r14,(0xbffc>>2)(r31)
-
- sll r14, 10, r14 // shift into position
- or r14, r13, r14 // add in upper bits
- sll r25, 8, r25 // shift HPC number into position
- or r14, r25, r14 // add in lower bits
- stqp r12, 0(r14) // write SMPLIRQx register
- mb
- ldqp r12, 0(r14) // read it back
- bis r12, r12, r12 // touch register to insure completion
-
-check_done: // do these now and return
- lda r25, osfsf_c_size(sp) // get updated sp
- bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
- br r31, pcia_check_return
-#endif
-
-
-// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only
-
- ALIGN_128
-
-kludge_initial_pcbb: // PCB is 128 bytes long
-// .repeat 16
-// .quad 0
-// .endr
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
- nop
- nop
- nop
- nop
-
-// .sbttl "SET_SC_BC_CTL subroutine"
-//
-// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
-// There must be no outstanding memory references -- istream or dstream -- when
-// these registers are written. EV5 prefetcher is difficult to turn off. So,
-// this routine needs to be exactly 32 instructions long// the final jmp must
-// be in the last octaword of a page (prefetcher doesn't go across page)
-//
-//
-// Register expecations:
-// r0 base address of CBOX iprs
-// r5 value to set sc_ctl to (flush bit is added in)
-// r6 value to set bc_ctl to
-// r7 value to set bc_config to
-// r10 return address
-// r19 old sc_ctl value
-// r20 old value of bc_ctl
-// r21 old value of bc_config
-// r23 flush scache flag
-// Register usage:
-// r17 sc_ctl with flush bit cleared
-// r22 loop address
-//
-//
-#ifndef SIMOS
- align_page <32*4> // puts start of routine at next page boundary minus 32 longwords.
-#endif
-
-set_sc_bc_ctl:
-
-#ifndef SIMOS
- br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest
-sc_ctl_loop:
-// XXX bugnion pvc$jsr scloop, dest=1
- mb
- mb
-
- bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23)
-
- stqp r19, ev5__sc_ctl(r0) // write sc_ctl
- stqp r20, ev5__bc_ctl(r0) // write bc_ctl
- bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop
- stqp r21, bc_config(r0) // write bc_config register
- bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop
-
- bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set
- //NOTE: only works because flush bit is in lower 16 bits
-
- wmb // don't merge with other writes
- stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit
- ldqp r17, ev5__sc_ctl(r0) // read sc_ctl
- bis r17, r17, r17 // stall until the data comes back
- bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop
-
- // fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
- t = 0
- .repeat 15
- unop
- t = t + 1
- .endr
- $opdef mnemonic= myjmp, -
- format= <custom=iregister, iregister, branch_offset>, -
- encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>
-
-// XXXbugnion pvc$jsr scloop
- myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
- // of straight) // r22 gets sc_ctl_done
- // 2nd time, code continues at sc_ctl_done (I hope)
-sc_ctl_done:
-// XXX bugnion pvc$jsr scloop, dest=1
-// XXX bugnion pvc$jsr scbcctl
-#endif /*SIMOS*/
- ret r31, (r10) // return to where we came from
-
-
-.end
-
-
-
-