diff options
Diffstat (limited to 'tests/quick/10.linux-boot')
24 files changed, 301 insertions, 103 deletions
diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini index 26eb3724f..1712ae4de 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini @@ -1,24 +1,33 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxAlphaSystem children=bridge cpu0 cpu1 disk0 disk2 intrctrl iobus iocache l2c membus physmem simple_disk terminal toL2Bus tsunami boot_cpu_frequency=500 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/chips/pd/randd/dist/binaries/console +console=/dist/m5/system/binaries/console init_param=0 -kernel=/chips/pd/randd/dist/binaries/vmlinux +kernel=/dist/m5/system/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=atomic -pal=/chips/pd/randd/dist/binaries/ts_osfpal +pal=/dist/m5/system/binaries/ts_osfpal physmem=system.physmem readfile=tests/halt.sh symbolfile= system_rev=1024 system_type=34 +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge @@ -265,7 +274,7 @@ table_size=65536 [system.disk0.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.disk2] @@ -285,7 +294,7 @@ table_size=65536 [system.disk2.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img +image_file=/dist/m5/system/disks/linux-bigswap2.img read_only=true [system.intrctrl] @@ -411,7 +420,7 @@ system=system [system.simple_disk.disk] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.terminal] @@ -882,7 +891,9 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 +ctrl_offset=0 disks=system.disk0 system.disk2 +io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simerr b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simerr index 83c71fc5c..0372a3b05 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simerr +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simerr @@ -2,4 +2,8 @@ warn: Sockets disabled, not accepting terminal connections For more information see: http://www.m5sim.org/warn/8742226b warn: Sockets disabled, not accepting gdb connections For more information see: http://www.m5sim.org/warn/d946bea6 +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba hack: be nice to actually delete the event here diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simout b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simout index 41c773ee0..dcb0b4c2e 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simout +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/simout @@ -1,5 +1,3 @@ -Redirecting stdout to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic-dual/simout -Redirecting stderr to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic-dual/simerr M5 Simulator System Copyright (c) 2001-2008 @@ -7,13 +5,13 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Nov 2 2010 23:00:12 -M5 revision 0af3760102ec+ 7713+ default qtip ext/alpha_prefetch.patch tip -M5 started Nov 2 2010 23:09:56 -M5 executing on aus-bc2-b15 +M5 compiled Feb 7 2011 01:46:17 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:46:32 +M5 executing on burrito command line: build/ALPHA_FS/m5.fast -d build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic-dual -re tests/run.py build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic-dual Global frequency set at 1000000000000 ticks per second -info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux +info: kernel located at: /dist/m5/system/binaries/vmlinux info: Entering event queue @ 0. Starting simulation... info: Launching CPU 1 @ 97861500 Exiting @ tick 1870335522500 because m5_exit instruction encountered diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stats.txt b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stats.txt index 8f44fff37..55bb5b9bd 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stats.txt +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 4418519 # Simulator instruction rate (inst/s) -host_mem_usage 326752 # Number of bytes of host memory used -host_seconds 14.29 # Real time elapsed on the host -host_tick_rate 130854140423 # Simulator tick rate (ticks/s) +host_inst_rate 1669061 # Simulator instruction rate (inst/s) +host_mem_usage 312244 # Number of bytes of host memory used +host_seconds 37.84 # Real time elapsed on the host +host_tick_rate 49429698361 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 63154034 # Number of instructions simulated sim_seconds 1.870336 # Number of seconds simulated @@ -305,8 +305,24 @@ system.cpu0.kern.syscall::147 2 0.88% 100.00% # nu system.cpu0.kern.syscall::total 226 # number of syscalls executed system.cpu0.not_idle_fraction 0.015300 # Percentage of non-idle cycles system.cpu0.numCycles 3740670933 # number of cpu cycles simulated +system.cpu0.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu0.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu0.num_busy_cycles 57233843.686322 # Number of busy cycles +system.cpu0.num_conditional_control_insts 6808233 # number of instructions that are conditional controls +system.cpu0.num_fp_alu_accesses 299810 # Number of float alu accesses +system.cpu0.num_fp_insts 299810 # number of float instructions +system.cpu0.num_fp_register_reads 147724 # number of times the floating registers were read +system.cpu0.num_fp_register_writes 150835 # number of times the floating registers were written +system.cpu0.num_func_calls 1399585 # number of times a function call or return occured +system.cpu0.num_idle_cycles 3683437089.313678 # Number of idle cycles system.cpu0.num_insts 57222076 # Number of instructions executed -system.cpu0.num_refs 15135515 # Number of memory references +system.cpu0.num_int_alu_accesses 53249924 # Number of integer alu accesses +system.cpu0.num_int_insts 53249924 # number of integer instructions +system.cpu0.num_int_register_reads 73318596 # number of times the integer registers were read +system.cpu0.num_int_register_writes 39827534 # number of times the integer registers were written +system.cpu0.num_load_insts 9184477 # Number of load instructions +system.cpu0.num_mem_refs 15135515 # number of memory refs +system.cpu0.num_store_insts 5951038 # Number of store instructions system.cpu1.dcache.LoadLockedReq_accesses::0 16418 # number of LoadLockedReq accesses(hits+misses) system.cpu1.dcache.LoadLockedReq_accesses::total 16418 # number of LoadLockedReq accesses(hits+misses) system.cpu1.dcache.LoadLockedReq_hits::0 15129 # number of LoadLockedReq hits @@ -587,8 +603,24 @@ system.cpu1.kern.syscall::132 2 2.00% 100.00% # nu system.cpu1.kern.syscall::total 100 # number of syscalls executed system.cpu1.not_idle_fraction 0.001587 # Percentage of non-idle cycles system.cpu1.numCycles 3740248881 # number of cpu cycles simulated +system.cpu1.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu1.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu1.num_busy_cycles 5936690.922345 # Number of busy cycles +system.cpu1.num_conditional_control_insts 577190 # number of instructions that are conditional controls +system.cpu1.num_fp_alu_accesses 28590 # Number of float alu accesses +system.cpu1.num_fp_insts 28590 # number of float instructions +system.cpu1.num_fp_register_reads 17889 # number of times the floating registers were read +system.cpu1.num_fp_register_writes 17683 # number of times the floating registers were written +system.cpu1.num_func_calls 182742 # number of times a function call or return occured +system.cpu1.num_idle_cycles 3734312190.077655 # Number of idle cycles system.cpu1.num_insts 5931958 # Number of instructions executed -system.cpu1.num_refs 1926244 # Number of memory references +system.cpu1.num_int_alu_accesses 5550578 # Number of integer alu accesses +system.cpu1.num_int_insts 5550578 # number of integer instructions +system.cpu1.num_int_register_reads 7657288 # number of times the integer registers were read +system.cpu1.num_int_register_writes 4163275 # number of times the integer registers were written +system.cpu1.num_load_insts 1170888 # Number of load instructions +system.cpu1.num_mem_refs 1926244 # number of memory refs +system.cpu1.num_store_insts 755356 # Number of store instructions system.disk0.dma_read_bytes 1024 # Number of bytes transfered via DMA reads (not PRD). system.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). system.disk0.dma_read_txs 1 # Number of DMA read transactions (not PRD). diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini index c5b353159..6d9c221c4 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini @@ -1,24 +1,33 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxAlphaSystem children=bridge cpu disk0 disk2 intrctrl iobus iocache l2c membus physmem simple_disk terminal toL2Bus tsunami boot_cpu_frequency=500 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/chips/pd/randd/dist/binaries/console +console=/dist/m5/system/binaries/console init_param=0 -kernel=/chips/pd/randd/dist/binaries/vmlinux +kernel=/dist/m5/system/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=atomic -pal=/chips/pd/randd/dist/binaries/ts_osfpal +pal=/dist/m5/system/binaries/ts_osfpal physmem=system.physmem readfile=tests/halt.sh symbolfile= system_rev=1024 system_type=34 +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge @@ -158,7 +167,7 @@ table_size=65536 [system.disk0.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.disk2] @@ -178,7 +187,7 @@ table_size=65536 [system.disk2.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img +image_file=/dist/m5/system/disks/linux-bigswap2.img read_only=true [system.intrctrl] @@ -304,7 +313,7 @@ system=system [system.simple_disk.disk] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.terminal] @@ -775,7 +784,9 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 +ctrl_offset=0 disks=system.disk0 system.disk2 +io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simerr b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simerr index 83c71fc5c..0372a3b05 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simerr +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simerr @@ -2,4 +2,8 @@ warn: Sockets disabled, not accepting terminal connections For more information see: http://www.m5sim.org/warn/8742226b warn: Sockets disabled, not accepting gdb connections For more information see: http://www.m5sim.org/warn/d946bea6 +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba hack: be nice to actually delete the event here diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simout b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simout index 85e98e7a4..644d4ca07 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simout +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/simout @@ -1,5 +1,3 @@ -Redirecting stdout to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic/simout -Redirecting stderr to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic/simerr M5 Simulator System Copyright (c) 2001-2008 @@ -7,12 +5,12 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Nov 2 2010 23:00:12 -M5 revision 0af3760102ec+ 7713+ default qtip ext/alpha_prefetch.patch tip -M5 started Nov 2 2010 23:09:41 -M5 executing on aus-bc2-b15 +M5 compiled Feb 7 2011 01:46:17 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:46:32 +M5 executing on burrito command line: build/ALPHA_FS/m5.fast -d build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic -re tests/run.py build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-atomic Global frequency set at 1000000000000 ticks per second -info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux +info: kernel located at: /dist/m5/system/binaries/vmlinux info: Entering event queue @ 0. Starting simulation... Exiting @ tick 1829332258000 because m5_exit instruction encountered diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stats.txt b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stats.txt index e2b7c8ed7..3b6776214 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stats.txt +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 4413707 # Simulator instruction rate (inst/s) -host_mem_usage 325356 # Number of bytes of host memory used -host_seconds 13.60 # Real time elapsed on the host -host_tick_rate 134480396261 # Simulator tick rate (ticks/s) +host_inst_rate 1616180 # Simulator instruction rate (inst/s) +host_mem_usage 311108 # Number of bytes of host memory used +host_seconds 37.15 # Real time elapsed on the host +host_tick_rate 49243802130 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 60038305 # Number of instructions simulated sim_seconds 1.829332 # Number of seconds simulated @@ -297,8 +297,24 @@ system.cpu.kern.syscall::147 2 0.61% 100.00% # nu system.cpu.kern.syscall::total 326 # number of syscalls executed system.cpu.not_idle_fraction 0.016415 # Percentage of non-idle cycles system.cpu.numCycles 3658664408 # number of cpu cycles simulated +system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu.num_busy_cycles 60055428.819193 # Number of busy cycles +system.cpu.num_conditional_control_insts 7110746 # number of instructions that are conditional controls +system.cpu.num_fp_alu_accesses 324460 # Number of float alu accesses +system.cpu.num_fp_insts 324460 # number of float instructions +system.cpu.num_fp_register_reads 163642 # number of times the floating registers were read +system.cpu.num_fp_register_writes 166520 # number of times the floating registers were written +system.cpu.num_func_calls 1484182 # number of times a function call or return occured +system.cpu.num_idle_cycles 3598608979.180807 # Number of idle cycles system.cpu.num_insts 60038305 # Number of instructions executed -system.cpu.num_refs 16115709 # Number of memory references +system.cpu.num_int_alu_accesses 55913521 # Number of integer alu accesses +system.cpu.num_int_insts 55913521 # number of integer instructions +system.cpu.num_int_register_reads 76953934 # number of times the integer registers were read +system.cpu.num_int_register_writes 41740225 # number of times the integer registers were written +system.cpu.num_load_insts 9747513 # Number of load instructions +system.cpu.num_mem_refs 16115709 # number of memory refs +system.cpu.num_store_insts 6368196 # Number of store instructions system.disk0.dma_read_bytes 1024 # Number of bytes transfered via DMA reads (not PRD). system.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). system.disk0.dma_read_txs 1 # Number of DMA read transactions (not PRD). diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini index ef977d929..41a7379e1 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini @@ -1,24 +1,33 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxAlphaSystem children=bridge cpu0 cpu1 disk0 disk2 intrctrl iobus iocache l2c membus physmem simple_disk terminal toL2Bus tsunami boot_cpu_frequency=500 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/chips/pd/randd/dist/binaries/console +console=/dist/m5/system/binaries/console init_param=0 -kernel=/chips/pd/randd/dist/binaries/vmlinux +kernel=/dist/m5/system/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=timing -pal=/chips/pd/randd/dist/binaries/ts_osfpal +pal=/dist/m5/system/binaries/ts_osfpal physmem=system.physmem readfile=tests/halt.sh symbolfile= system_rev=1024 system_type=34 +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge @@ -259,7 +268,7 @@ table_size=65536 [system.disk0.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.disk2] @@ -279,7 +288,7 @@ table_size=65536 [system.disk2.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img +image_file=/dist/m5/system/disks/linux-bigswap2.img read_only=true [system.intrctrl] @@ -405,7 +414,7 @@ system=system [system.simple_disk.disk] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.terminal] @@ -876,7 +885,9 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 +ctrl_offset=0 disks=system.disk0 system.disk2 +io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simerr b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simerr index 83c71fc5c..0372a3b05 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simerr +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simerr @@ -2,4 +2,8 @@ warn: Sockets disabled, not accepting terminal connections For more information see: http://www.m5sim.org/warn/8742226b warn: Sockets disabled, not accepting gdb connections For more information see: http://www.m5sim.org/warn/d946bea6 +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba hack: be nice to actually delete the event here diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simout b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simout index 8585e8d27..8f8e92a25 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simout +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/simout @@ -1,5 +1,3 @@ -Redirecting stdout to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing-dual/simout -Redirecting stderr to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing-dual/simerr M5 Simulator System Copyright (c) 2001-2008 @@ -7,13 +5,13 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Nov 2 2010 23:00:12 -M5 revision 0af3760102ec+ 7713+ default qtip ext/alpha_prefetch.patch tip -M5 started Nov 2 2010 23:10:42 -M5 executing on aus-bc2-b15 +M5 compiled Feb 7 2011 01:46:17 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:46:32 +M5 executing on burrito command line: build/ALPHA_FS/m5.fast -d build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing-dual -re tests/run.py build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing-dual Global frequency set at 1000000000000 ticks per second -info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux +info: kernel located at: /dist/m5/system/binaries/vmlinux info: Entering event queue @ 0. Starting simulation... info: Launching CPU 1 @ 562628000 Exiting @ tick 1958647095000 because m5_exit instruction encountered diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stats.txt b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stats.txt index 0517b4d72..6e0648c43 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stats.txt +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 1781653 # Simulator instruction rate (inst/s) -host_mem_usage 323564 # Number of bytes of host memory used -host_seconds 33.32 # Real time elapsed on the host -host_tick_rate 58791386546 # Simulator tick rate (ticks/s) +host_inst_rate 901052 # Simulator instruction rate (inst/s) +host_mem_usage 309020 # Number of bytes of host memory used +host_seconds 65.87 # Real time elapsed on the host +host_tick_rate 29733229075 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 59355643 # Number of instructions simulated sim_seconds 1.958647 # Number of seconds simulated @@ -360,8 +360,24 @@ system.cpu0.kern.syscall::147 2 0.90% 100.00% # nu system.cpu0.kern.syscall::total 222 # number of syscalls executed system.cpu0.not_idle_fraction 0.060263 # Percentage of non-idle cycles system.cpu0.numCycles 3916023774 # number of cpu cycles simulated +system.cpu0.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu0.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu0.num_busy_cycles 235989726.444158 # Number of busy cycles +system.cpu0.num_conditional_control_insts 6237040 # number of instructions that are conditional controls +system.cpu0.num_fp_alu_accesses 293967 # Number of float alu accesses +system.cpu0.num_fp_insts 293967 # number of float instructions +system.cpu0.num_fp_register_reads 143353 # number of times the floating registers were read +system.cpu0.num_fp_register_writes 146452 # number of times the floating registers were written +system.cpu0.num_func_calls 1426863 # number of times a function call or return occured +system.cpu0.num_idle_cycles 3680034047.555842 # Number of idle cycles system.cpu0.num_insts 54072652 # Number of instructions executed -system.cpu0.num_refs 14724357 # Number of memory references +system.cpu0.num_int_alu_accesses 50043234 # Number of integer alu accesses +system.cpu0.num_int_insts 50043234 # number of integer instructions +system.cpu0.num_int_register_reads 68528072 # number of times the integer registers were read +system.cpu0.num_int_register_writes 37080372 # number of times the integer registers were written +system.cpu0.num_load_insts 8664914 # Number of load instructions +system.cpu0.num_mem_refs 14724357 # number of memory refs +system.cpu0.num_store_insts 6059443 # Number of store instructions system.cpu1.dcache.LoadLockedReq_accesses::0 12766 # number of LoadLockedReq accesses(hits+misses) system.cpu1.dcache.LoadLockedReq_accesses::total 12766 # number of LoadLockedReq accesses(hits+misses) system.cpu1.dcache.LoadLockedReq_avg_miss_latency::0 13318.737271 # average LoadLockedReq miss latency @@ -691,8 +707,24 @@ system.cpu1.kern.syscall::132 3 2.88% 100.00% # nu system.cpu1.kern.syscall::total 104 # number of syscalls executed system.cpu1.not_idle_fraction 0.004865 # Percentage of non-idle cycles system.cpu1.numCycles 3917294190 # number of cpu cycles simulated +system.cpu1.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu1.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu1.num_busy_cycles 19057169.001990 # Number of busy cycles +system.cpu1.num_conditional_control_insts 510974 # number of instructions that are conditional controls +system.cpu1.num_fp_alu_accesses 34031 # Number of float alu accesses +system.cpu1.num_fp_insts 34031 # number of float instructions +system.cpu1.num_fp_register_reads 22062 # number of times the floating registers were read +system.cpu1.num_fp_register_writes 21862 # number of times the floating registers were written +system.cpu1.num_func_calls 158031 # number of times a function call or return occured +system.cpu1.num_idle_cycles 3898237020.998010 # Number of idle cycles system.cpu1.num_insts 5282991 # Number of instructions executed -system.cpu1.num_refs 1710778 # Number of memory references +system.cpu1.num_int_alu_accesses 4948310 # Number of integer alu accesses +system.cpu1.num_int_insts 4948310 # number of integer instructions +system.cpu1.num_int_register_reads 6886066 # number of times the integer registers were read +system.cpu1.num_int_register_writes 3732878 # number of times the integer registers were written +system.cpu1.num_load_insts 1056124 # Number of load instructions +system.cpu1.num_mem_refs 1710778 # number of memory refs +system.cpu1.num_store_insts 654654 # Number of store instructions system.disk0.dma_read_bytes 1024 # Number of bytes transfered via DMA reads (not PRD). system.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). system.disk0.dma_read_txs 1 # Number of DMA read transactions (not PRD). diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini index 14aa8c52d..f28d4e037 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini @@ -1,24 +1,33 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxAlphaSystem children=bridge cpu disk0 disk2 intrctrl iobus iocache l2c membus physmem simple_disk terminal toL2Bus tsunami boot_cpu_frequency=500 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/chips/pd/randd/dist/binaries/console +console=/dist/m5/system/binaries/console init_param=0 -kernel=/chips/pd/randd/dist/binaries/vmlinux +kernel=/dist/m5/system/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=timing -pal=/chips/pd/randd/dist/binaries/ts_osfpal +pal=/dist/m5/system/binaries/ts_osfpal physmem=system.physmem readfile=tests/halt.sh symbolfile= system_rev=1024 system_type=34 +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge @@ -155,7 +164,7 @@ table_size=65536 [system.disk0.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.disk2] @@ -175,7 +184,7 @@ table_size=65536 [system.disk2.image.child] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img +image_file=/dist/m5/system/disks/linux-bigswap2.img read_only=true [system.intrctrl] @@ -301,7 +310,7 @@ system=system [system.simple_disk.disk] type=RawDiskImage -image_file=/chips/pd/randd/dist/disks/linux-latest.img +image_file=/dist/m5/system/disks/linux-latest.img read_only=true [system.terminal] @@ -772,7 +781,9 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 +ctrl_offset=0 disks=system.disk0 system.disk2 +io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simerr b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simerr index 83c71fc5c..0372a3b05 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simerr +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simerr @@ -2,4 +2,8 @@ warn: Sockets disabled, not accepting terminal connections For more information see: http://www.m5sim.org/warn/8742226b warn: Sockets disabled, not accepting gdb connections For more information see: http://www.m5sim.org/warn/d946bea6 +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba +warn: Prefetch instrutions is Alpha do not do anything +For more information see: http://www.m5sim.org/warn/3e0eccba hack: be nice to actually delete the event here diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simout b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simout index af718c31f..be2bcef8d 100755 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simout +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/simout @@ -1,5 +1,3 @@ -Redirecting stdout to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing/simout -Redirecting stderr to build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing/simerr M5 Simulator System Copyright (c) 2001-2008 @@ -7,12 +5,12 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Nov 2 2010 23:00:12 -M5 revision 0af3760102ec+ 7713+ default qtip ext/alpha_prefetch.patch tip -M5 started Nov 2 2010 23:10:12 -M5 executing on aus-bc2-b15 +M5 compiled Feb 7 2011 01:46:17 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:46:32 +M5 executing on burrito command line: build/ALPHA_FS/m5.fast -d build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing -re tests/run.py build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple-timing Global frequency set at 1000000000000 ticks per second -info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux +info: kernel located at: /dist/m5/system/binaries/vmlinux info: Entering event queue @ 0. Starting simulation... Exiting @ tick 1915548867000 because m5_exit instruction encountered diff --git a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/stats.txt b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/stats.txt index 37bf681b4..5f1750494 100644 --- a/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/stats.txt +++ b/tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 1917155 # Simulator instruction rate (inst/s) -host_mem_usage 322176 # Number of bytes of host memory used -host_seconds 29.28 # Real time elapsed on the host -host_tick_rate 65417896896 # Simulator tick rate (ticks/s) +host_inst_rate 1077887 # Simulator instruction rate (inst/s) +host_mem_usage 307624 # Number of bytes of host memory used +host_seconds 52.08 # Real time elapsed on the host +host_tick_rate 36780244064 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 56137087 # Number of instructions simulated sim_seconds 1.915549 # Number of seconds simulated @@ -341,8 +341,24 @@ system.cpu.kern.syscall::147 2 0.61% 100.00% # nu system.cpu.kern.syscall::total 326 # number of syscalls executed system.cpu.not_idle_fraction 0.063469 # Percentage of non-idle cycles system.cpu.numCycles 3831097734 # number of cpu cycles simulated +system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu.num_busy_cycles 243154546.001873 # Number of busy cycles +system.cpu.num_conditional_control_insts 6464616 # number of instructions that are conditional controls +system.cpu.num_fp_alu_accesses 324192 # Number of float alu accesses +system.cpu.num_fp_insts 324192 # number of float instructions +system.cpu.num_fp_register_reads 163510 # number of times the floating registers were read +system.cpu.num_fp_register_writes 166384 # number of times the floating registers were written +system.cpu.num_func_calls 1482242 # number of times a function call or return occured +system.cpu.num_idle_cycles 3587943187.998127 # Number of idle cycles system.cpu.num_insts 56137087 # Number of instructions executed -system.cpu.num_refs 15462519 # Number of memory references +system.cpu.num_int_alu_accesses 52011214 # Number of integer alu accesses +system.cpu.num_int_insts 52011214 # number of integer instructions +system.cpu.num_int_register_reads 71259077 # number of times the integer registers were read +system.cpu.num_int_register_writes 38485860 # number of times the integer registers were written +system.cpu.num_load_insts 9094324 # Number of load instructions +system.cpu.num_mem_refs 15462519 # number of memory refs +system.cpu.num_store_insts 6368195 # Number of store instructions system.disk0.dma_read_bytes 1024 # Number of bytes transfered via DMA reads (not PRD). system.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). system.disk0.dma_read_txs 1 # Number of DMA read transactions (not PRD). diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/config.ini b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/config.ini index 505488008..79021a958 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/config.ini +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/config.ini @@ -1,7 +1,9 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxArmSystem @@ -9,13 +11,20 @@ children=bridge cpu diskmem intrctrl iobus iocache l2c membus physmem realview t boot_cpu_frequency=500 boot_osflags=earlyprintk mem=128MB console=ttyAMA0 lpj=19988480 norandmaps slram=slram0,0x8000000,+0x8000000 mtdparts=slram0:- rw loglevel=8 root=/dev/mtdblock0 init_param=0 -kernel=/chips/pd/randd/dist/binaries/vmlinux.arm +kernel=/dist/m5/system/binaries/vmlinux.arm load_addr_mask=268435455 machine_type=RealView_PBX mem_mode=atomic physmem=system.physmem readfile=tests/halt.sh symbolfile= +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge @@ -158,7 +167,7 @@ type=ExeTracer [system.diskmem] type=PhysicalMemory -file=/chips/pd/randd/dist/disks/ael-arm.ext2 +file=/dist/m5/system/disks/ael-arm.ext2 latency=30000 latency_var=0 null=false diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/simout b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/simout index 05fcdedb2..ba4c6742c 100755 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/simout +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/simout @@ -5,12 +5,12 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Oct 15 2010 11:17:32 -M5 revision e459beb39dd0 7713 default ext/amba_kmi_pl050.patch qtip tip -M5 started Oct 15 2010 11:17:48 -M5 executing on aus-bc3-b4 -command line: build/ARM_FS/m5.opt -d build/ARM_FS/tests/opt/quick/10.linux-boot/arm/linux/realview-simple-atomic -re tests/run.py build/ARM_FS/tests/opt/quick/10.linux-boot/arm/linux/realview-simple-atomic +M5 compiled Feb 7 2011 01:53:13 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:53:26 +M5 executing on burrito +command line: build/ARM_FS/m5.fast -d build/ARM_FS/tests/fast/quick/10.linux-boot/arm/linux/realview-simple-atomic -re tests/run.py build/ARM_FS/tests/fast/quick/10.linux-boot/arm/linux/realview-simple-atomic Global frequency set at 1000000000000 ticks per second -info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux.arm +info: kernel located at: /dist/m5/system/binaries/vmlinux.arm info: Entering event queue @ 0. Starting simulation... Exiting @ tick 25821310500 because m5_exit instruction encountered diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/stats.txt b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/stats.txt index 1bfa8bc8a..0a7542a7c 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/stats.txt +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 1831927 # Simulator instruction rate (inst/s) -host_mem_usage 384484 # Number of bytes of host memory used -host_seconds 27.81 # Real time elapsed on the host -host_tick_rate 928414614 # Simulator tick rate (ticks/s) +host_inst_rate 739167 # Simulator instruction rate (inst/s) +host_mem_usage 360776 # Number of bytes of host memory used +host_seconds 68.93 # Real time elapsed on the host +host_tick_rate 374609475 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 50949504 # Number of instructions simulated sim_seconds 0.025821 # Number of seconds simulated @@ -225,8 +225,24 @@ system.cpu.kern.inst.arm 0 # nu system.cpu.kern.inst.quiesce 0 # number of quiesce instructions executed system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles system.cpu.numCycles 51642622 # number of cpu cycles simulated +system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu.num_busy_cycles 51642622 # Number of busy cycles +system.cpu.num_conditional_control_insts 0 # number of instructions that are conditional controls +system.cpu.num_fp_alu_accesses 6059 # Number of float alu accesses +system.cpu.num_fp_insts 6059 # number of float instructions +system.cpu.num_fp_register_reads 4227 # number of times the floating registers were read +system.cpu.num_fp_register_writes 1834 # number of times the floating registers were written +system.cpu.num_func_calls 0 # number of times a function call or return occured +system.cpu.num_idle_cycles 0 # Number of idle cycles system.cpu.num_insts 50949504 # Number of instructions executed -system.cpu.num_refs 16092645 # Number of memory references +system.cpu.num_int_alu_accesses 41395090 # Number of integer alu accesses +system.cpu.num_int_insts 41395090 # number of integer instructions +system.cpu.num_int_register_reads 128438705 # number of times the integer registers were read +system.cpu.num_int_register_writes 33973128 # number of times the integer registers were written +system.cpu.num_load_insts 9082722 # Number of load instructions +system.cpu.num_mem_refs 16092645 # number of memory refs +system.cpu.num_store_insts 7009923 # Number of store instructions system.iocache.avg_blocked_cycles::no_mshrs no_value # average number of cycles each access was blocked system.iocache.avg_blocked_cycles::no_targets no_value # average number of cycles each access was blocked system.iocache.avg_refs no_value # Average number of references to valid blocks. diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/status b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/status index 586cb6b73..53b01d583 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/status +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/status @@ -1 +1 @@ -build/ARM_FS/tests/opt/quick/10.linux-boot/arm/linux/realview-simple-atomic FAILED! +build/ARM_FS/tests/fast/quick/10.linux-boot/arm/linux/realview-simple-atomic FAILED! diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/config.ini b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/config.ini index c7f419728..4fad32362 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/config.ini +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/config.ini @@ -1,7 +1,9 @@ [root] type=Root children=system -dummy=0 +time_sync_enable=false +time_sync_period=100000000000 +time_sync_spin_threshold=100000000 [system] type=LinuxArmSystem @@ -16,6 +18,13 @@ mem_mode=timing physmem=system.physmem readfile=tests/halt.sh symbolfile= +work_begin_ckpt_count=0 +work_begin_cpu_id_exit=-1 +work_begin_exit_count=0 +work_cpus_ckpt_count=0 +work_end_ckpt_count=0 +work_end_exit_count=0 +work_item_id=-1 [system.bridge] type=Bridge diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/simout b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/simout index 8382cb48d..994dfb6a2 100755 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/simout +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/simout @@ -5,10 +5,10 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Jan 17 2011 18:36:49 -M5 revision f72d94f8c275 7839 default qtip tip outgoing.patch qbase -M5 started Jan 17 2011 18:36:52 -M5 executing on zizzer +M5 compiled Feb 7 2011 01:53:13 +M5 revision 4b4b02c5553c 7929 default qtip reupdatestats.patch tip +M5 started Feb 7 2011 01:53:26 +M5 executing on burrito command line: build/ARM_FS/m5.fast -d build/ARM_FS/tests/fast/quick/10.linux-boot/arm/linux/realview-simple-timing -re tests/run.py build/ARM_FS/tests/fast/quick/10.linux-boot/arm/linux/realview-simple-timing Global frequency set at 1000000000000 ticks per second info: kernel located at: /dist/m5/system/binaries/vmlinux.arm diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/stats.txt b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/stats.txt index 157177a6b..85fb99220 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/stats.txt +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/stats.txt @@ -1,9 +1,9 @@ ---------- Begin Simulation Statistics ---------- -host_inst_rate 1461109 # Simulator instruction rate (inst/s) -host_mem_usage 340352 # Number of bytes of host memory used -host_seconds 34.61 # Real time elapsed on the host -host_tick_rate 3314430509 # Simulator tick rate (ticks/s) +host_inst_rate 433208 # Simulator instruction rate (inst/s) +host_mem_usage 360908 # Number of bytes of host memory used +host_seconds 116.74 # Real time elapsed on the host +host_tick_rate 982709659 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 50572425 # Number of instructions simulated sim_seconds 0.114721 # Number of seconds simulated @@ -273,8 +273,24 @@ system.cpu.kern.inst.arm 0 # nu system.cpu.kern.inst.quiesce 0 # number of quiesce instructions executed system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles system.cpu.numCycles 229442148 # number of cpu cycles simulated +system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed +system.cpu.numWorkItemsStarted 0 # number of work items this cpu started +system.cpu.num_busy_cycles 229442148 # Number of busy cycles +system.cpu.num_conditional_control_insts 0 # number of instructions that are conditional controls +system.cpu.num_fp_alu_accesses 6058 # Number of float alu accesses +system.cpu.num_fp_insts 6058 # number of float instructions +system.cpu.num_fp_register_reads 4226 # number of times the floating registers were read +system.cpu.num_fp_register_writes 1834 # number of times the floating registers were written +system.cpu.num_func_calls 0 # number of times a function call or return occured +system.cpu.num_idle_cycles 0 # Number of idle cycles system.cpu.num_insts 50572425 # Number of instructions executed -system.cpu.num_refs 16289993 # Number of memory references +system.cpu.num_int_alu_accesses 41827211 # Number of integer alu accesses +system.cpu.num_int_insts 41827211 # number of integer instructions +system.cpu.num_int_register_reads 137988684 # number of times the integer registers were read +system.cpu.num_int_register_writes 34313952 # number of times the integer registers were written +system.cpu.num_load_insts 9208240 # Number of load instructions +system.cpu.num_mem_refs 16289993 # number of memory refs +system.cpu.num_store_insts 7081753 # Number of store instructions system.iocache.avg_blocked_cycles::no_mshrs no_value # average number of cycles each access was blocked system.iocache.avg_blocked_cycles::no_targets no_value # average number of cycles each access was blocked system.iocache.avg_refs no_value # Average number of references to valid blocks. diff --git a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/system.terminal b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/system.terminal Binary files differindex 19639b6da..f3053783c 100644 --- a/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/system.terminal +++ b/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-timing/system.terminal |