diff options
Diffstat (limited to 'tests/quick/80.netperf-stream/ref/alpha/linux')
4 files changed, 34 insertions, 120 deletions
diff --git a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini index e6d4ef8de..84f87c01b 100644 --- a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini +++ b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini @@ -3,24 +3,17 @@ type=LinuxAlphaSystem children=bridge cpu disk0 disk2 intrctrl iobus membus physmem simple_disk terminal tsunami boot_cpu_frequency=1 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/console +console=/chips/pd/randd/dist/binaries/console init_param=0 -kernel=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/vmlinux +kernel=/chips/pd/randd/dist/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=atomic -pal=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/ts_osfpal +pal=/chips/pd/randd/dist/binaries/ts_osfpal physmem=drivesys.physmem -readfile=/proj/radl_extra/users/bbeckman/noc_m5/configs/boot/netperf-server.rcS +readfile=/arm/scratch/alisai01/m5/configs/boot/netperf-server.rcS symbolfile= system_rev=1024 system_type=34 -work_begin_ckpt_count=0 -work_begin_cpu_id_exit=-1 -work_begin_exit_count=0 -work_cpus_ckpt_count=0 -work_end_ckpt_count=0 -work_end_exit_count=0 -work_item_id=-1 [drivesys.bridge] type=Bridge @@ -98,7 +91,7 @@ table_size=65536 [drivesys.disk0.image.child] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-latest.img +image_file=/chips/pd/randd/dist/disks/linux-latest.img read_only=true [drivesys.disk2] @@ -118,7 +111,7 @@ table_size=65536 [drivesys.disk2.image.child] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-bigswap2.img +image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img read_only=true [drivesys.intrctrl] @@ -182,7 +175,7 @@ system=drivesys [drivesys.simple_disk.disk] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-latest.img +image_file=/chips/pd/randd/dist/disks/linux-latest.img read_only=true [drivesys.terminal] @@ -644,9 +637,7 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 -ctrl_offset=0 disks=drivesys.disk0 drivesys.disk2 -io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 @@ -715,33 +706,24 @@ int1=drivesys.tsunami.ethernet.interface [root] type=Root children=drivesys etherdump etherlink testsys -time_sync_enable=false -time_sync_period=100000000000 -time_sync_spin_threshold=100000000 +dummy=0 [testsys] type=LinuxAlphaSystem children=bridge cpu disk0 disk2 intrctrl iobus membus physmem simple_disk terminal tsunami boot_cpu_frequency=1 boot_osflags=root=/dev/hda1 console=ttyS0 -console=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/console +console=/chips/pd/randd/dist/binaries/console init_param=0 -kernel=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/vmlinux +kernel=/chips/pd/randd/dist/binaries/vmlinux load_addr_mask=1099511627775 mem_mode=atomic -pal=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/ts_osfpal +pal=/chips/pd/randd/dist/binaries/ts_osfpal physmem=testsys.physmem -readfile=/proj/radl_extra/users/bbeckman/noc_m5/configs/boot/netperf-stream-client.rcS +readfile=/arm/scratch/alisai01/m5/configs/boot/netperf-stream-client.rcS symbolfile= system_rev=1024 system_type=34 -work_begin_ckpt_count=0 -work_begin_cpu_id_exit=-1 -work_begin_exit_count=0 -work_cpus_ckpt_count=0 -work_end_ckpt_count=0 -work_end_exit_count=0 -work_item_id=-1 [testsys.bridge] type=Bridge @@ -819,7 +801,7 @@ table_size=65536 [testsys.disk0.image.child] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-latest.img +image_file=/chips/pd/randd/dist/disks/linux-latest.img read_only=true [testsys.disk2] @@ -839,7 +821,7 @@ table_size=65536 [testsys.disk2.image.child] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-bigswap2.img +image_file=/chips/pd/randd/dist/disks/linux-bigswap2.img read_only=true [testsys.intrctrl] @@ -903,7 +885,7 @@ system=testsys [testsys.simple_disk.disk] type=RawDiskImage -image_file=/proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/disks/linux-latest.img +image_file=/chips/pd/randd/dist/disks/linux-latest.img read_only=true [testsys.terminal] @@ -1365,9 +1347,7 @@ SubsystemID=0 SubsystemVendorID=0 VendorID=32902 config_latency=20000 -ctrl_offset=0 disks=testsys.disk0 testsys.disk2 -io_shift=0 max_backoff_delay=10000000 min_backoff_delay=4000 pci_bus=0 diff --git a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simerr b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simerr index d5294a000..c18ca3505 100755 --- a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simerr +++ b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simerr @@ -2,10 +2,6 @@ warn: Sockets disabled, not accepting terminal connections For more information see: http://www.m5sim.org/warn/8742226b warn: Sockets disabled, not accepting gdb connections For more information see: http://www.m5sim.org/warn/d946bea6 -warn: Prefetch instrutions is Alpha do not do anything -For more information see: http://www.m5sim.org/warn/3e0eccba -warn: Prefetch instrutions is Alpha do not do anything -For more information see: http://www.m5sim.org/warn/3e0eccba warn: Obsolete M5 ivlb instruction encountered. For more information see: http://www.m5sim.org/warn/fcbd217d hack: be nice to actually delete the event here diff --git a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simout b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simout index 6dfccbecc..2dcdfae87 100755 --- a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simout +++ b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/simout @@ -1,3 +1,5 @@ +Redirecting stdout to build/ALPHA_FS/tests/fast/quick/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic/simout +Redirecting stderr to build/ALPHA_FS/tests/fast/quick/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic/simerr M5 Simulator System Copyright (c) 2001-2008 @@ -5,13 +7,13 @@ The Regents of The University of Michigan All Rights Reserved -M5 compiled Feb 6 2011 15:18:06 -M5 revision b885adc82ab4+ 7924+ default tip qtip brad/regress_updates -M5 started Feb 6 2011 20:45:27 -M5 executing on SC2B0617 +M5 compiled Nov 2 2010 23:00:12 +M5 revision 0af3760102ec+ 7713+ default qtip ext/alpha_prefetch.patch tip +M5 started Nov 2 2010 23:11:17 +M5 executing on aus-bc2-b15 command line: build/ALPHA_FS/m5.fast -d build/ALPHA_FS/tests/fast/quick/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic -re tests/run.py build/ALPHA_FS/tests/fast/quick/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic Global frequency set at 1000000000000 ticks per second -info: kernel located at: /proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/vmlinux -info: kernel located at: /proj/aatl_perfmod_arch/m5_system_files/m5_system_2.0b3/binaries/vmlinux +info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux +info: kernel located at: /chips/pd/randd/dist/binaries/vmlinux info: Entering event queue @ 0. Starting simulation... Exiting @ tick 4300236804024 because checkpoint diff --git a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stats.txt b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stats.txt index 5e2d23c72..9fb1ef54c 100644 --- a/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stats.txt +++ b/tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stats.txt @@ -93,24 +93,8 @@ drivesys.cpu.kern.syscall::150 1 4.55% 100.00% # nu drivesys.cpu.kern.syscall::total 22 # number of syscalls executed drivesys.cpu.not_idle_fraction 0.000010 # Percentage of non-idle cycles drivesys.cpu.numCycles 199571362884 # number of cpu cycles simulated -drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed -drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started -drivesys.cpu.num_busy_cycles 1954747.881971 # Number of busy cycles -drivesys.cpu.num_conditional_control_insts 161093 # number of instructions that are conditional controls -drivesys.cpu.num_fp_alu_accesses 1278 # Number of float alu accesses -drivesys.cpu.num_fp_insts 1278 # number of float instructions -drivesys.cpu.num_fp_register_reads 694 # number of times the floating registers were read -drivesys.cpu.num_fp_register_writes 698 # number of times the floating registers were written -drivesys.cpu.num_func_calls 121650 # number of times a function call or return occured -drivesys.cpu.num_idle_cycles 199569408136.118042 # Number of idle cycles drivesys.cpu.num_insts 1958129 # Number of instructions executed -drivesys.cpu.num_int_alu_accesses 1889973 # Number of integer alu accesses -drivesys.cpu.num_int_insts 1889973 # number of integer instructions -drivesys.cpu.num_int_register_reads 2411030 # number of times the integer registers were read -drivesys.cpu.num_int_register_writes 1442447 # number of times the integer registers were written -drivesys.cpu.num_load_insts 394697 # Number of load instructions -drivesys.cpu.num_mem_refs 625939 # number of memory refs -drivesys.cpu.num_store_insts 231242 # Number of store instructions +drivesys.cpu.num_refs 625939 # Number of memory references drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD). drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD). @@ -172,10 +156,10 @@ drivesys.tsunami.ethernet.txPPS 25 # Pa drivesys.tsunami.ethernet.txPackets 5 # Number of Packets Transmitted drivesys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device drivesys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device -host_inst_rate 147484777 # Simulator instruction rate (inst/s) -host_mem_usage 480356 # Number of bytes of host memory used -host_seconds 1.85 # Real time elapsed on the host -host_tick_rate 107890886853 # Simulator tick rate (ticks/s) +host_inst_rate 245765975 # Simulator instruction rate (inst/s) +host_mem_usage 512700 # Number of bytes of host memory used +host_seconds 1.11 # Real time elapsed on the host +host_tick_rate 179775828937 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 273374833 # Number of instructions simulated sim_seconds 0.200001 # Number of seconds simulated @@ -283,24 +267,8 @@ testsys.cpu.kern.syscall::118 2 2.41% 100.00% # nu testsys.cpu.kern.syscall::total 83 # number of syscalls executed testsys.cpu.not_idle_fraction 0.000018 # Percentage of non-idle cycles testsys.cpu.numCycles 199569460393 # number of cpu cycles simulated -testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed -testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started -testsys.cpu.num_busy_cycles 3558262.534294 # Number of busy cycles -testsys.cpu.num_conditional_control_insts 361828 # number of instructions that are conditional controls -testsys.cpu.num_fp_alu_accesses 17380 # Number of float alu accesses -testsys.cpu.num_fp_insts 17380 # number of float instructions -testsys.cpu.num_fp_register_reads 11166 # number of times the floating registers were read -testsys.cpu.num_fp_register_writes 10823 # number of times the floating registers were written -testsys.cpu.num_func_calls 107994 # number of times a function call or return occured -testsys.cpu.num_idle_cycles 199565902130.465698 # Number of idle cycles testsys.cpu.num_insts 3560411 # Number of instructions executed -testsys.cpu.num_int_alu_accesses 3348322 # Number of integer alu accesses -testsys.cpu.num_int_insts 3348322 # number of integer instructions -testsys.cpu.num_int_register_reads 4592571 # number of times the integer registers were read -testsys.cpu.num_int_register_writes 2442795 # number of times the integer registers were written -testsys.cpu.num_load_insts 666253 # Number of load instructions -testsys.cpu.num_mem_refs 1173234 # number of memory refs -testsys.cpu.num_store_insts 506981 # Number of store instructions +testsys.cpu.num_refs 1173234 # Number of memory references testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD). testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD). @@ -418,24 +386,8 @@ drivesys.cpu.kern.mode_ticks::idle 0 # nu drivesys.cpu.kern.swap_context 0 # number of times the context was actually changed drivesys.cpu.not_idle_fraction 0 # Percentage of non-idle cycles drivesys.cpu.numCycles 0 # number of cpu cycles simulated -drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed -drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started -drivesys.cpu.num_busy_cycles 0 # Number of busy cycles -drivesys.cpu.num_conditional_control_insts 0 # number of instructions that are conditional controls -drivesys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses -drivesys.cpu.num_fp_insts 0 # number of float instructions -drivesys.cpu.num_fp_register_reads 0 # number of times the floating registers were read -drivesys.cpu.num_fp_register_writes 0 # number of times the floating registers were written -drivesys.cpu.num_func_calls 0 # number of times a function call or return occured -drivesys.cpu.num_idle_cycles 0 # Number of idle cycles drivesys.cpu.num_insts 0 # Number of instructions executed -drivesys.cpu.num_int_alu_accesses 0 # Number of integer alu accesses -drivesys.cpu.num_int_insts 0 # number of integer instructions -drivesys.cpu.num_int_register_reads 0 # number of times the integer registers were read -drivesys.cpu.num_int_register_writes 0 # number of times the integer registers were written -drivesys.cpu.num_load_insts 0 # Number of load instructions -drivesys.cpu.num_mem_refs 0 # number of memory refs -drivesys.cpu.num_store_insts 0 # Number of store instructions +drivesys.cpu.num_refs 0 # Number of memory references drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD). drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD). @@ -479,10 +431,10 @@ drivesys.tsunami.ethernet.totalSwi 0 # to drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR drivesys.tsunami.ethernet.totalTxIdle 0 # total number of TxIdle written to ISR drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR -host_inst_rate 146424656133 # Simulator instruction rate (inst/s) -host_mem_usage 480356 # Number of bytes of host memory used +host_inst_rate 151538155765 # Simulator instruction rate (inst/s) +host_mem_usage 512700 # Number of bytes of host memory used host_seconds 0.00 # Real time elapsed on the host -host_tick_rate 399379065 # Simulator tick rate (ticks/s) +host_tick_rate 415641460 # Simulator tick rate (ticks/s) sim_freq 1000000000000 # Frequency of simulated ticks sim_insts 273374833 # Number of instructions simulated sim_seconds 0.000001 # Number of seconds simulated @@ -539,24 +491,8 @@ testsys.cpu.kern.mode_ticks::idle 0 # nu testsys.cpu.kern.swap_context 0 # number of times the context was actually changed testsys.cpu.not_idle_fraction 0 # Percentage of non-idle cycles testsys.cpu.numCycles 0 # number of cpu cycles simulated -testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed -testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started -testsys.cpu.num_busy_cycles 0 # Number of busy cycles -testsys.cpu.num_conditional_control_insts 0 # number of instructions that are conditional controls -testsys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses -testsys.cpu.num_fp_insts 0 # number of float instructions -testsys.cpu.num_fp_register_reads 0 # number of times the floating registers were read -testsys.cpu.num_fp_register_writes 0 # number of times the floating registers were written -testsys.cpu.num_func_calls 0 # number of times a function call or return occured -testsys.cpu.num_idle_cycles 0 # Number of idle cycles testsys.cpu.num_insts 0 # Number of instructions executed -testsys.cpu.num_int_alu_accesses 0 # Number of integer alu accesses -testsys.cpu.num_int_insts 0 # number of integer instructions -testsys.cpu.num_int_register_reads 0 # number of times the integer registers were read -testsys.cpu.num_int_register_writes 0 # number of times the integer registers were written -testsys.cpu.num_load_insts 0 # Number of load instructions -testsys.cpu.num_mem_refs 0 # number of memory refs -testsys.cpu.num_store_insts 0 # Number of store instructions +testsys.cpu.num_refs 0 # Number of memory references testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD). testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD). testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD). |