diff options
Diffstat (limited to 'tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt')
| -rw-r--r-- | tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt | 57 |
1 files changed, 37 insertions, 20 deletions
diff --git a/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt b/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt index 895c59829..2b23aa030 100644 --- a/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt +++ b/tests/quick/se/00.hello/ref/power/linux/o3-timing/stats.txt @@ -4,11 +4,11 @@ sim_seconds 0.000019 # Nu sim_ticks 18857500 # Number of ticks simulated final_tick 18857500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset) sim_freq 1000000000000 # Frequency of simulated ticks -host_inst_rate 41326 # Simulator instruction rate (inst/s) -host_op_rate 41320 # Simulator op (including micro ops) rate (op/s) -host_tick_rate 134509153 # Simulator tick rate (ticks/s) -host_mem_usage 232584 # Number of bytes of host memory used -host_seconds 0.14 # Real time elapsed on the host +host_inst_rate 98075 # Simulator instruction rate (inst/s) +host_op_rate 98051 # Simulator op (including micro ops) rate (op/s) +host_tick_rate 319158839 # Simulator tick rate (ticks/s) +host_mem_usage 285824 # Number of bytes of host memory used +host_seconds 0.06 # Real time elapsed on the host sim_insts 5792 # Number of instructions simulated sim_ops 5792 # Number of ops (including micro ops) simulated system.voltage_domain.voltage 1 # Voltage in Volts @@ -200,12 +200,12 @@ system.physmem.bytesPerActivate::768-895 1 1.27% 82.28% # By system.physmem.bytesPerActivate::896-1023 3 3.80% 86.08% # Bytes accessed per row activation system.physmem.bytesPerActivate::1024-1151 11 13.92% 100.00% # Bytes accessed per row activation system.physmem.bytesPerActivate::total 79 # Bytes accessed per row activation -system.physmem.totQLat 3609000 # Total ticks spent queuing -system.physmem.totMemAccLat 11934000 # Total ticks spent from burst creation until serviced by the DRAM +system.physmem.totQLat 3635500 # Total ticks spent queuing +system.physmem.totMemAccLat 11960500 # Total ticks spent from burst creation until serviced by the DRAM system.physmem.totBusLat 2220000 # Total ticks spent in databus transfers -system.physmem.avgQLat 8128.38 # Average queueing delay per DRAM burst +system.physmem.avgQLat 8188.06 # Average queueing delay per DRAM burst system.physmem.avgBusLat 5000.00 # Average bus latency per DRAM burst -system.physmem.avgMemAccLat 26878.38 # Average memory access latency per DRAM burst +system.physmem.avgMemAccLat 26938.06 # Average memory access latency per DRAM burst system.physmem.avgRdBW 1506.88 # Average DRAM read bandwidth in MiByte/s system.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MiByte/s system.physmem.avgRdBWSys 1506.88 # Average system read bandwidth in MiByte/s @@ -227,17 +227,25 @@ system.physmem.memoryStateTime::REF 520000 # Ti system.physmem.memoryStateTime::PRE_PDN 0 # Time in different power states system.physmem.memoryStateTime::ACT 15315250 # Time in different power states system.physmem.memoryStateTime::ACT_PDN 0 # Time in different power states -system.membus.throughput 1506880552 # Throughput (bytes/s) system.membus.trans_dist::ReadReq 397 # Transaction distribution system.membus.trans_dist::ReadResp 397 # Transaction distribution system.membus.trans_dist::ReadExReq 47 # Transaction distribution system.membus.trans_dist::ReadExResp 47 # Transaction distribution system.membus.pkt_count_system.cpu.l2cache.mem_side::system.physmem.port 888 # Packet count per connected master and slave (bytes) system.membus.pkt_count::total 888 # Packet count per connected master and slave (bytes) -system.membus.tot_pkt_size_system.cpu.l2cache.mem_side::system.physmem.port 28416 # Cumulative packet size per connected master and slave (bytes) -system.membus.tot_pkt_size::total 28416 # Cumulative packet size per connected master and slave (bytes) -system.membus.data_through_bus 28416 # Total data (bytes) -system.membus.snoop_data_through_bus 0 # Total snoop data (bytes) +system.membus.pkt_size_system.cpu.l2cache.mem_side::system.physmem.port 28416 # Cumulative packet size per connected master and slave (bytes) +system.membus.pkt_size::total 28416 # Cumulative packet size per connected master and slave (bytes) +system.membus.snoops 0 # Total snoops (count) +system.membus.snoop_fanout::samples 444 # Request fanout histogram +system.membus.snoop_fanout::mean 0 # Request fanout histogram +system.membus.snoop_fanout::stdev 0 # Request fanout histogram +system.membus.snoop_fanout::underflows 0 0.00% 0.00% # Request fanout histogram +system.membus.snoop_fanout::0 444 100.00% 100.00% # Request fanout histogram +system.membus.snoop_fanout::1 0 0.00% 100.00% # Request fanout histogram +system.membus.snoop_fanout::overflows 0 0.00% 100.00% # Request fanout histogram +system.membus.snoop_fanout::min_value 0 # Request fanout histogram +system.membus.snoop_fanout::max_value 0 # Request fanout histogram +system.membus.snoop_fanout::total 444 # Request fanout histogram system.membus.reqLayer0.occupancy 555500 # Layer occupancy (ticks) system.membus.reqLayer0.utilization 2.9 # Layer utilization (%) system.membus.respLayer1.occupancy 4160750 # Layer occupancy (ticks) @@ -563,7 +571,6 @@ system.cpu.int_regfile_reads 13743 # nu system.cpu.int_regfile_writes 7176 # number of integer regfile writes system.cpu.fp_regfile_reads 25 # number of floating regfile reads system.cpu.fp_regfile_writes 2 # number of floating regfile writes -system.cpu.toL2Bus.throughput 1530637677 # Throughput (bytes/s) system.cpu.toL2Bus.trans_dist::ReadReq 405 # Transaction distribution system.cpu.toL2Bus.trans_dist::ReadResp 404 # Transaction distribution system.cpu.toL2Bus.trans_dist::ReadExReq 47 # Transaction distribution @@ -571,11 +578,21 @@ system.cpu.toL2Bus.trans_dist::ReadExResp 47 # T system.cpu.toL2Bus.pkt_count_system.cpu.icache.mem_side::system.cpu.l2cache.cpu_side 699 # Packet count per connected master and slave (bytes) system.cpu.toL2Bus.pkt_count_system.cpu.dcache.mem_side::system.cpu.l2cache.cpu_side 204 # Packet count per connected master and slave (bytes) system.cpu.toL2Bus.pkt_count::total 903 # Packet count per connected master and slave (bytes) -system.cpu.toL2Bus.tot_pkt_size_system.cpu.icache.mem_side::system.cpu.l2cache.cpu_side 22336 # Cumulative packet size per connected master and slave (bytes) -system.cpu.toL2Bus.tot_pkt_size_system.cpu.dcache.mem_side::system.cpu.l2cache.cpu_side 6528 # Cumulative packet size per connected master and slave (bytes) -system.cpu.toL2Bus.tot_pkt_size::total 28864 # Cumulative packet size per connected master and slave (bytes) -system.cpu.toL2Bus.data_through_bus 28864 # Total data (bytes) -system.cpu.toL2Bus.snoop_data_through_bus 0 # Total snoop data (bytes) +system.cpu.toL2Bus.pkt_size_system.cpu.icache.mem_side::system.cpu.l2cache.cpu_side 22336 # Cumulative packet size per connected master and slave (bytes) +system.cpu.toL2Bus.pkt_size_system.cpu.dcache.mem_side::system.cpu.l2cache.cpu_side 6528 # Cumulative packet size per connected master and slave (bytes) +system.cpu.toL2Bus.pkt_size::total 28864 # Cumulative packet size per connected master and slave (bytes) +system.cpu.toL2Bus.snoops 0 # Total snoops (count) +system.cpu.toL2Bus.snoop_fanout::samples 452 # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::mean 1 # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::stdev 0 # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::underflows 0 0.00% 0.00% # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::0 0 0.00% 0.00% # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::1 452 100.00% 100.00% # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::2 0 0.00% 100.00% # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::overflows 0 0.00% 100.00% # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::min_value 1 # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::max_value 1 # Request fanout histogram +system.cpu.toL2Bus.snoop_fanout::total 452 # Request fanout histogram system.cpu.toL2Bus.reqLayer0.occupancy 226000 # Layer occupancy (ticks) system.cpu.toL2Bus.reqLayer0.utilization 1.2 # Layer utilization (%) system.cpu.toL2Bus.respLayer0.occupancy 584250 # Layer occupancy (ticks) |