| Age | Commit message (Collapse) | Author |
|---|
|
Remove redundant information from the ExtMachInst, hash the vex
information to ensure the decode cache works properly, print the vex info
when printing an ExtMachInst, consider the vex info when comparing two
ExtMachInsts, fold the info from the vex prefixes into existing settings,
remove redundant decode code, handle vex prefixes one byte at a time and
don't bother building up the entire prefix, and let instructions that care
about vex use it in their implementation, instead of developing an entire
parallel decode tree.
This also eliminates the error prone vex immediate decode table which was
incomplete and would result in an out of bounds access for incorrectly
encoded instructions or when the CPU was mispeculating, as it was (as far
as I can tell) redundant with the tables that already existed for two and
three byte opcodes. There were differences, but I think those may have
been mistakes based on the documentation I found.
Also, in 32 bit mode, the VEX prefixes might actually be LDS or LES
instructions which are still legal in that mode. A valid VEX prefix would
look like an LDS/LES with an otherwise invalid modrm encoding, so use that
as a signal to abort processing the VEX and turn the instruction into an
LES/LDS as appropriate.
Change-Id: Icb367eaaa35590692df1c98862f315da4c139f5c
Reviewed-on: https://gem5-review.googlesource.com/3501
Reviewed-by: Joe Gross <joe.gross@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When the LiveProcess class was renamed to be just Process, the CL author
also changed the syscall function from a virtual function into a regular
one. Unfortunately, the I386Process class overrode the syscall function
to adjust the return address so that control would return to the right
place. Without that adjustment, 32 bit x86 process would segfault and die
immediately after their first system call.
This change reinstates the virtual specifier on the base syscall function,
and adds an override keyword on the I386Process's version so that it won't
be orphaned again in the future. It also fixes some small style issues the
style checker script complained about.
Change-Id: I0d1178ea0eda6676050c8fc043820a2bb4d99c0d
Reviewed-on: https://gem5-review.googlesource.com/3500
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I318c185b117b9608110544526fbaaa3fdcdeb8bc
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3260
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The PMU model currently doesn't calculate the PMU event counter index
correctly for writes to the PMEVTYPER[0-5]_EL0 registers. Fix this
obvious mistake.
Change-Id: I2913eedddeb98480660e2d63948f6d727adf5ab8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3121
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
The current implementation of reference counting for PyEvents only
partially works. The native object is currently kept alive while it is
in the event queue. However, if the Python object goes out of scope,
the Python side of this object is garbage collected which leaves a
"dangling" native object. This results in confusing error messages
where PyBind is unable to find the Python implementation of an event
when it is triggered.
Implement reference counting using the generalized reference counting
API instead.
Change-Id: I4e8e04abc4f61dff238d718065f5371e73b38ab3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3222
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
We currently only support deleting an event if it is triggered and not
re-scheduled. This is fine for most native code. However, there are
cases where Python needs to count references to make sure that the
Python object stays live while the native object is live.
Generalise the mechanism used to implement by adding reference
counting hooks to the event base class:
* Event::acquire() / Event::acquireImpl()
* Event::release() / Event::releaseImpl()
These calls can be used to implement both reference counting and the
existing AutoDelete functionality. The default implementation in Event
maintains backwards compatibility with the existing AutoDelete feature
by ignoring acquireImpl() and deleting the event on releaseImpl() if
it isn't scheduled anymore.
Since AutoDelete functionality is no longer the only way events can be
managed, this change introduces the new Managed flag. This flag
activates automatic memory management. The acquireImpl()/releaseImpl()
methods are only called from acquire()/release() it is set. To
maintain backwards compatibility, AutoDelete is used as an alias for
Managed.
Change-Id: I5637984c906a9d44c22780712cf1c521b8297149
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3221
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes a problem with RISC-V initial stack setup in SE mode
where the AT_RANDOM aux vector value contains an address that is too
close to the top of the stack and doesn't fit the required 16 bytes. To
fix this, the program header table was added to the top of the stack
just like the RISC-V proxy kernel does.
Change-Id: I814562e060ff041cd0d7a7c54c3685645bd325a3
Reviewed-on: https://gem5-review.googlesource.com/3401
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
The ISA code for ARM calculates min and max elements for types using
bit manipulation. That triggers some warnings, treated as errors, as
the compiler can tell that there is an overflow and the sign
flips. Fixed using standard lib definitions instead.
Change-Id: Ie2331b410c7f76d4bd87da5afe9edf20c8ac91b3
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3481
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I16870dec402d661295f9d013dc23e362b2b2c169
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3225
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The PyBind wrappers could potentially delete SimObjects if they don't
have any references. This is not desirable since there could be
pointers to such objects within the C++ world. This problem doesn't
normally occur since Python typically holds a pointer to the root node
as long as the simulator is running.
Prevent SimObject and Param deletion by using a PyBind-prescribed
unique_ptr with a dummy deleter as the pointer wrapper for the Python
world.
Change-Id: Ied14602c9ee69a083a69c5dae1b5fcf8efb4548a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3224
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
There is a weird issue with the PyBind wrapper of
vector<AddrRange>. Assigning new values to a param that is a vector of
AddrRange sometimes results in an out-of-bounds memory access.
We work around this issue by treating AddrRange vectors as opaque
types. This slightly changes the semantics of the wrapper since Python
now manipulates the real object rather than a copy that has been
converted to a list.
Change-Id: Ie027c06e7a7262214b43b19a76b24fe4b20426c5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Timothy Hayes <timothy.hayes@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3223
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The SConstruct currently expects all explicit targets to be under a
variant directory like ARM or X86 which tells it what settings to use,
etc. There are things which scons knows how to build however, which do not
live under a variant directory, specifically everything under ext.
This change makes scons not look for a variant directory when it
encounters a target which is built by something in ext. This enables
things like explicitly building the systemc libraries, for example.
Change-Id: I8982a96fe49e3cb970ec78e11cea08703990c686
Reviewed-on: https://gem5-review.googlesource.com/3460
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Christian Menard <christian.menard@tu-dresden.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The readline module is imported by main.py but doesn't seem to be
used.
Change-Id: I7888e3b6ad0a0fedc14b0feec2adf0a39883bbf8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3421
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Compiling gem5 with recent version of clang (4 and 5) triggers
warnings that are treated as errors:
* Global templatized static functions result in a warning if they
are not used. These should either be declared as static inline or
without the static identifier to avoid the warning.
* Some templatized classes contain static variables. The
instantiated versions of these variables / templates need to be
explicitly declared to avoid a compiler warning.
Change-Id: Ie8261144836e94ebab7ea04ccccb90927672c257
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3420
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.
Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I2a146ae57aac3787389997961208474a97e7c155
Reviewed-on: https://gem5-review.googlesource.com/3360
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
CPU aliases have been dropped, this change fixes the big.LITTLE example.
Change-Id: Idd59a6eca93448ef0e23087365fb5452bcef9247
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-on: https://gem5-review.googlesource.com/3300
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch enables using calibrated big and LITTLE cores, ex5_big and
ex5_LITTLE instead of the default 'arm_detailed' and 'minor' cpus. The ex5
model is based on the Samsung Exynos 5 Octa (5422) SoC. Operation and memory
hierarchy latencies have been calibrated using the lmbench micro-benchmark
suite. The preliminary validation results have been published as: 'Full-System
Simulation of big.LITTLE Multicore Architecture for Performance and Energy
Exploration', in International Symposium on Embedded Multicore/Many-core
Systems-on-Chip (MCSoC'16), Lyon, France (Sep, 2016).
From http://reviews.gem5.org/r/3666
Change-Id: I4935dee0a9222bd1bf7adfccb9443014945bb2d7
Signed-off-by: Anastasiia Butko <abutko@lbl.gov>
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-on: https://gem5-review.googlesource.com/2464
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
In the past it happened several times that some changes in gem5 broke the
SystemC coupling. Recently Accelera has changed the licence for SystemC
from their own licence to Apache2.0, which is compatible with gem5.
However, SystemC usually relies on the Boost library, but I was able to
exchange the boost calls by c++11 alternatives. The recent SystemC version
is placed into /ext and is integrated into gem5's build system. The goal is
to integrate some SystemC tests for the CI in some following patches.
Change-Id: I4b66ec806b5e3cffc1d7c85d3735ff4fa5b31fd0
Reviewed-on: https://gem5-review.googlesource.com/2240
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
necessary kernel command line options in FSConfig.py
Change-Id: Id66f640b6beb4efa9c23080c3d2516eda688c72d
Reviewed-on: https://gem5-review.googlesource.com/3320
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the operands were 64 bit, an intermediate calculation could lose a
carry bit. This change rearranges that intermediate calculation if the
operand width is large, and reworks the microop implementation in general
in an attempt to make it easier to understand.
Change-Id: Ib36333f3f2695a33cd9623e43682de22ebd2e7ea
Reviewed-on: https://gem5-review.googlesource.com/3381
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Add a helper function, m5.event.create(), to create events from
Python. This function takes a callable Python object (e.g., a
function) as an argument and optionally a priority as a keyword
argument. This function was accidentally dropped from the public API
when switching to PyBind.
Change-Id: Icbd0e392d9506934ec2c9f541199aa35c1c2df8c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3220
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The style checker complains about line length and ordering for these
files. This fix should make these two files kosher.
Change-Id: I822a0518a98d9e379a543d2017e90c4e9666a58d
Reviewed-on: https://gem5-review.googlesource.com/3380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
If a (regular) store is followed closely enough by a locked load that
overlaps, the LSQ will forward the store's data to the locked load and
never tell the cache about the locked load. As a result, the cache will
not lock the address and all future store-conditional requests on that
address will fail. This patch fixes that by preventing forwarding if
the memory request is a locked load and adding another case to the LSQ
forwarding logic that delays the locked load request if a store in the
LSQ contains all or part of the data that is requested.
[Merge second and last if blocks because their bodies are the same.]
Change-Id: I895cc2b9570035267bdf6ae3fdc8a09049969841
Reviewed-on: https://gem5-review.googlesource.com/2400
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
We don't implement the GICD_IGROUPRn registers, which is allowed, but
to be correct, they should be RAZ/WI (read as zero, writes ignored).
Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the client does something bad, don't kill the whole simulation, just
complain, drop the client and keep going.
Change-Id: I824f2d121e2fe03cdf4323a25c192b68e0370acc
Reviewed-on: https://gem5-review.googlesource.com/3200
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Currently, if the remote gdb stub fails to read a byte from an incoming
packet because the connection has been dropped, the read call will return
anyway and the calling code will have no way to know something bad
happened. It might reattempt the read over and over again waiting for some
particular byte, doomed to never make forward progress.
This change modifies the remote GDB code so that if a read or write call
fails, it will instead detach from the debugger and continue. Before this
change, When simulating a port scan, ie connecting to the debugger port
and then immediately dropping the connection using this command:
nc -v -n -z -w 1 127.0.0.1 7000
gem5 would enter the previously described death spiral. After it, gem5
detaches from the bad connection and resumes execution. Subsequently
attaching with gdb was successful.
This code is written in a C centric style, and would benefit from some
refactoring.
Change-Id: Ie3c0bb35b9cfe3671d0f731e3907548bae0d292f
Reviewed-on: https://gem5-review.googlesource.com/3180
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Clang's UBSAN implementation complains about macros that expand to
expressions that contain 'defined'. Explicitly set the various feature
macros to 1 or 0 to avoid this issue.
Change-Id: Iba239dacfe526c43ab9c5da5183a350fc4fdc57d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3241
|
|
The DumpStatsPCEventF is declared but lacks an implementation. This
confuses RTTI in clang. Remove this class since it is clearly not
needed.
Change-Id: Ib95f09f2ba8593f8d0e072b96afd5f8a9ed31070
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3240
Reviewed-by: B.A. Zeeb <baz21@cam.ac.uk>
|
|
Now that the switching header implementation has been generalized, there's
no need to have two nearly identical implementations for the two different
groups of headers.
Change-Id: Ie7c24fcddbc672ac5ca2d69bfc35696f42c55580
Reviewed-on: https://gem5-review.googlesource.com/2984
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Factor out the ISA ness of the switching header generating function. Also
turn it into a SCons builder which builds a single header, and a wrapping
method which uses the builder on a group of header files which all target
the same subdirectory.
Change-Id: I87705f97b6ebd9baebd4ebcfea19cc1218a64ad0
Reviewed-on: https://gem5-review.googlesource.com/2983
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Support for CPU aliases were removed recently.
Change-Id: I3c1173dc34170d8639d95e52bf660f248848f77f
Reviewed-on: https://gem5-review.googlesource.com/3100
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This value can be computed more directly and more locally near where it's
used.
Change-Id: Ib5f45015494a6c8033ce0ac4b8931688f37492c8
Reviewed-on: https://gem5-review.googlesource.com/2982
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This option invokes the Listener::loopbackOnly() static function which
will make the port listeners bind to the loopback device exclusively and
ignore connections on other devices. That prevents external agents like
port scanners from disrupting simulations with spurious connections.
Change-Id: I46b22165046792a6f970826c109bdbce7db25c84
Reviewed-on: https://gem5-review.googlesource.com/3082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ibb405af54a46a93706a6f476b5314491e84be0c8
Reviewed-on: https://gem5-review.googlesource.com/3081
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The loopback device will allow access to various services like remote GDB
debugging, connecting to the terminal, etc., without letting external
agents like port scanners connect and disrupting the simulation.
Change-Id: I76dccbf152fa278ae9f342b25f7e345a1329fbe4
Reviewed-on: https://gem5-review.googlesource.com/3080
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Some PyBind11 headers need to include Python.h. This means that we need
to include PyBind11 headers before any standard library headers. Enforce
this by applying the Python.hh rules for anything in pybind11/.
Change-Id: Id175a4f613960a17f84f98b81bfd02806e905d5a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3120
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
|
|
The PyBind11 changes slightly modified gem5's internal debug
interfaces. The corresponding change to the public API went missing
before the new bindings were merged. This change updates the Python
glue to use the new interface.
Change-Id: I3ecca5a3f6c35b99d55126d697371124f81a12dd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3140
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Add support for memory-mapped m5ops in the aarch64 version of the m5
utility. To enable support for memory-mapped m5ops, compile the tool
with the define M5OP_ADDR set to the base of the m5op PA range.
Change-Id: I13e21e48536b9849bf4081411b66b2f350f7a8ac
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2966
|
|
Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part
of the CS5 address range in the RS1/RS2 memory map.
Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2965
|
|
Add support for a memory mapped m5op interface. When enabled, the TLB
intercepts accesses in the 64KiB region designated by the
ArmTLB.m5ops_base parameter. An access to this range maps to a
specific m5op call. The upper 8 bits of the offset into the range
denote the m5op function to call and the lower 8 bits denote the
subfunction.
Change-Id: I55fd8ac1afef4c3cc423b973870c9fe600a843a2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2964
|
|
The state transfer code wasn't reading back PSTATE correctly from the
CPU prior to updating the thread context and was incorreclty writing
the register as a 32-bit value when updating KVM. Correctly read back
the state before updating gem5's view of PSTATE and cast the value to
a uint64_t.
Change-Id: I0a6ff5b77b897c756b20a20f65c420f42386360f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2963
Reviewed-by: Rahul Thakur <rjthakur@google.com>
|
|
The m5 tool has subcommands that writes a file to the simulated file
system. The implementation of this command currently doesn't check the
return value from write, which leads to compiler warnings and
potentially incorrect behavior. Add the necessary checks.
Change-Id: If558534d3245aa24cf15edf06bd0af4c6ba3908c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2962
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Change-Id: Ib8bf4eac77170db8b2bf44796fd9d46b02217d03
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3122
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
It seems like the m5 utility incorrectly called m5_loadsymbol instead
of m5_addsymbol. Judging by the signature of the loadsymbol command,
the expected behavior is to add a new symbol to gem5's symbol
table. This is behavior is implemented by m5_addsymbol.
Change-Id: I83b61c48d6f8d7b1e8b57d884dfca00481c83c3a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2961
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Fix a missing header in the cxx_config example which is used as a
simple example of using libgem5.so without python.
Change-Id: I758bfe42ba735ce0c7eaedd49b94a130e3bd21e3
Reviewed-on: https://gem5-review.googlesource.com/3000
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The value of that variable can be computed more directly and more locally
to where it's consumed.
Change-Id: I5ca1f732a34e22d4dae2aeb6ee7fc8adebe1caa0
Reviewed-on: https://gem5-review.googlesource.com/2981
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Ic24a1c3c1488e970ed27bb6b99262d201f535384
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2960
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
For Value() nodes, the get_contents() method and the get_text_contents()
method are just aliases to the same thing, both of which return a value
which has already been converted using str(). The str() which was included
explicitly in the SConscript was redundant, except that it showed that the
value from get_contents was being treated as a string. To avoid the
redundancy but to still leave a hint to the value's type, this change
converts those bits of code to use get_text_contents() and removes the
str().
Change-Id: I8f7da9b652f749e741b553c9a0e2248ae15ec3ca
Reviewed-on: https://gem5-review.googlesource.com/3084
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
That clues scons in to the fact that the contents of the target of that
function depends on the value of that construction variable.
Change-Id: I803322ea1a178152da3d95dffffe20acd4271c88
Reviewed-on: https://gem5-review.googlesource.com/3083
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
