summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-27x86: implements x87 add/sub instructionsNilay Vaish
2014-01-27x86: implements fxch instruction.Nilay Vaish
2014-01-27x86: correct error in emms instruction.Nilay Vaish
2014-01-27config: allow more than 3GB of memory for x86 simulationsNilay Vaish
This patch edits the configuration files so that x86 simulations can have more than 3GB of memory. It also corrects a bug in the MemConfig.py script.
2014-01-27stats: update sparc fs statsNilay Vaish
2014-01-27stats: update eio stats for recent changesSteve Reinhardt
2014-01-24stats: update stats for ARMv8 changesAli Saidi
2014-01-24arm: Add support for ARMv8 (AArch64 & AArch32)ARM gem5 Developers
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2014-01-24stats: update stats for cache occupancy and clock domain changesAli Saidi
2014-01-24arch: Make all register index flattening constAndreas Hansson
This patch makes all the register index flattening methods const for all the ISAs. As part of this, readMiscRegNoEffect for ARM is also made const.
2014-01-24checker: CheckerCPU handling of MiscRegs was incorrectGeoffrey Blake
The CheckerCPU model in pre-v8 code was not checking the updates to miscellaneous registers due to some methods for setting misc regs were not instrumented. The v8 patches exposed this by calling the instrumented misc reg update methods and then invoking the checker before the main CPU had updated its misc regs, leading to false positives about register mismatches. This patch fixes the non-instrumented misc reg update methods and places calls to the checker in the proper places in the O3 model.
2014-01-24arch, cpu: Add support for flattening misc register indexes.Ali Saidi
With ARMv8 support the same misc register id results in accessing different registers depending on the current mode of the processor. This patch adds the same orthogonality to the misc register file as the others (int, float, cc). For all the othre ISAs this is currently a null-implementation. Additionally, a system variable is added to all the ISA objects.
2014-01-24cpu: Add support for Memory+Barrier instruction types in O3 cpu.Giacomo Gabrielli
2014-01-24cpu: Add support for instructions that zero cache lines.Ali Saidi
2014-01-24cpu: Add CPU support for generatig wake up events when LLSC adresses are ↵Ali Saidi
snooped. This patch add support for generating wake-up events in the CPU when an address that is currently in the exclusive state is hit by a snoop. This mechanism is required for ARMv8 multi-processor support.
2014-01-24mem: Add flag to request if it was generated by a page table walkGiacomo Gabrielli
2014-01-24mem: Add support for a security bit in the memory systemGiacomo Gabrielli
This patch adds the basic building blocks required to support e.g. ARM TrustZone by discerning secure and non-secure memory accesses.
2014-01-24sim: Add openat/fstatat syscalls and fix mremapChris Adeniyi-Jones
This patch adds support for the openat and fstatat syscalls and broadens the support for mremap to make it work on OS X.
2014-01-24mem: Remove explict cast from memhelper.Ali Saidi
Previously we were casting the result type to the the memory type which is incorrect for things like dual-memory operations which still return a single result.
2014-01-24Cache: Collect very basic stats on tag and data accessesTimothy M. Jones
Adds very basic statistics on the number of tag and data accesses within the cache, which is important for power modelling. For the tags, simply count the associativity of the cache each time. For the data, this depends on whether tags and data are accessed sequentially, which is given by a new parameter. In the parallel case, all data blocks are accessed each time, but with sequential accesses, a single data block is accessed only on a hit.
2014-01-24mem: per-thread cache occupancy and per-block agesDam Sunwoo
This patch enables tracking of cache occupancy per thread along with ages (in buckets) per cache blocks. Cache occupancy stats are recalculated on each stat dump.
2014-01-24base: add support for probe points and common probesMatt Horsnell
The probe patch is motivated by the desire to move analytical and trace code away from functional code. This is achieved by the probe interface which is essentially a glorified observer model. What this means to users: * add a probe point and a "notify" call at the source of an "event" * add an isolated module, that is being used to carry out *your* analysis (e.g. generate a trace) * register that module as a probe listener Note: an example is given for reference in src/cpu/o3/simple_trace.[hh|cc] and src/cpu/SimpleTrace.py What is happening under the hood: * every SimObject maintains has a ProbeManager. * during initialization (src/python/m5/simulate.py) first regProbePoints and the regProbeListeners is called on each SimObject. this hooks up the probe point notify calls with the listeners. FAQs: Why did you develop probe points: * to remove trace, stats gathering, analytical code out of the functional code. * the belief that probes could be generically useful. What is a probe point: * a probe point is used to notify upon a given event (e.g. cpu commits an instruction) What is a probe listener: * a class that handles whatever the user wishes to do when they are notified about an event. What can be passed on notify: * probe points are templates, and so the user can generate probes that pass any type of argument (by const reference) to a listener. What relationships can be generated (1:1, 1:N, N:M etc): * there isn't a restriction. You can hook probe points and listeners up in a 1:1, 1:N, N:M relationship. They become useful when a number of modules listen to the same probe points. The idea being that you can add a small number of probes into the source code and develop a larger number of useful analysis modules that use information passed by the probes. Can you give examples: * adding a probe point to the cpu's commit method allows you to build a trace module (outputting assembler), you could re-use this to gather instruction distribution (arithmetic, load/store, conditional, control flow) stats. Why is the probe interface currently restricted to passing a const reference: * the desire, initially at least, is to allow an interface to observe functionality, but not to change functionality. * of course this can be subverted by const-casting. What is the performance impact of adding probes: * when nothing is actively listening to the probes they should have a relatively minor impact. Profiling has suggested even with a large number of probes (60) the impact of them (when not active) is very minimal (<1%).
2014-01-24sim: Expose the current voltage for each object as a statAndreas Hansson
2014-01-24sim: Expose the current clock period as a statAndreas Hansson
This patch adds observability to the clock period of the clock domains by including it as a stat. As a result of adding this, the regressions will be updated in a separate patch.
2014-01-24mem: track per-request latencies and access depths in the cache hierarchyMatt Horsnell
Add some values and methods to the request object to track the translation and access latency for a request and which level of the cache hierarchy responded to the request.
2014-01-24config: Make the Clock a Tick parameter like Latency/FrequencyAndreas Hansson
This patch makes the Clock a TickParamValue just like Latency/Frequency. There is no longer any need to distinguish it (originally needed to support multiplication).
2014-01-24x86: Fix memory leak in table walkerAndreas Hansson
This patch fixes a memory leak in the table walker, by ensuring that the sender state is deleted again if the request packet cannot be successfully sent.
2014-01-24cpu: Relax check on squashed non-speculative instructionsAndreas Hansson
This patch relaxes the check performed when squashing non-speculative instructions, as it caused problems with loads that were marked ready, and then stalled on a blocked cache. The assertion is now allowing memory references to be non-faulting.
2014-01-24util: updated Streamline flow to support ARM DS-5 v5.17 protocolDam Sunwoo
The previous flow supported ARM DS-5 v5.13 protocol.
2014-01-24cpu: remove faulty simpoint basic block inst count assertionDam Sunwoo
This patch removes an assertion in the simpoint profiling code that asserts that a previously-seen basic block has the exact same number of instructions executed as before. This can be false if the basic block generates aborts or takes interrupts at different locations within the basic block. The basic block profiling are not affected significantly as these events are rare in general.
2014-01-17ruby: remove unused label no_vectorNilay Vaish
2014-01-10stats: updates due to changes to rubyNilay Vaish
2014-01-10ruby: move all statistics to stats.txt, eliminate ruby.statsNilay Vaish
2014-01-10stats: add function for adding two histogramsNilay Vaish
This patch adds a function to the HistStor class for adding two histograms. This functionality is required for Ruby. It also adds support for printing histograms in a single line.
2014-01-09ruby: fix bug introduced to revision 8523754f8885Nilay Vaish
2014-01-08ruby: slicc: remove variable 'addr' used in calls to doTransitionNilay Vaish
This variable causes trouble if a variable of same name is declared in a protocol file. Hence it is being eliminated.
2014-01-04ruby: add a three level MESI protocol.Nilay Vaish
The first two levels (L0, L1) are private to the core, the third level (L2)is possibly shared. The protocol supports clustered designs. For example, one can have two sets of two cores. Each core has an L0 and L1 cache. There are two L2 controllers where each set accesses only one of the L2 controllers.
2014-01-04ruby: rename MESI_CMP_directory to MESI_Two_LevelNilay Vaish
This is because the next patch introduces a three level hierarchy. --HG-- rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04ruby: remove cntrl_id from python config scripts.Nilay Vaish
2014-01-04ruby: add support for clustersNilay Vaish
A cluster over here means a set of controllers that can be accessed only by a certain set of cores. For example, consider a two level hierarchy. Assume there are 4 L1 controllers (private) and 2 L2 controllers. We can have two different hierarchies here: a. the address space is partitioned between the two L2 controllers. Each L1 controller accesses both the L2 controllers. In this case, each L1 controller is a cluster initself. b. both the L2 controllers can cache any address. An L1 controller has access to only one of the L2 controllers. In this case, each L2 controller along with the L1 controllers that access it, form a cluster. This patch allows for each controller to have a cluster ID, which is 0 by default. By setting the cluster ID properly, one can instantiate hierarchies with clusters. Note that the coherence protocol might have to be changed as well.
2014-01-04ruby: some small changesNilay Vaish
2014-01-03config, x86: move kernel specification from tests to FSConfig.pySteve Reinhardt
For some reason, the default x86 kernel is specified in tests/configs/x86_generic.py and not in configs/common/FSConfig.py, where the kernels for all the other ISAs are. This means that running configs/example/fs.py for x86 fails because no kernel is specified. Moving the specification over fixes this problem. There is another problem that this uncovers, which is that going past the init stage (i.e., past where the regression test stops) fails because the fsck test on the disk device fails, but that's a separate issue.
2014-01-03python: provide better error message for wrapped C++ methodsSteve Reinhardt
If you successfully export a C++ SimObject method, but try to invoke it from Python before the C++ object is created, you get a confusing error that says the attribute does not exist, making you question whether you successfully exported the method at all. In reality, your only problem is that you're calling the method too soon. This patch enhances the error message to give you a better clue.
2014-01-03python: don't die on assignment to cloned objectSteve Reinhardt
Updating the SimObject topology of a cloned hierarchy is a little dangerous, in that cloning is a "deep copy" and the clone does not inherit SimObject updates the same way it would inherit scalar variable assignments. However, because of various SimObject-valued proxy parameters, like 'memories', 'clk_domain', and 'system', it turns out that there are a number of implicit topology changes that happen at instantiation, which means that these changes are impossible to avoid. So in order to make cloning systems useful, this error has to go. Changing it to a warning produces a lot of noise, so it seems best just to delete it.
2013-12-29sim: Add support for dynamic frequency scalingChristopher Torng
This patch provides support for DFS by having ClockedObjects register themselves with their clock domain at construction time in a member list. Using this list, a clock domain can update each member's tick to the curTick() before modifying the clock period. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-12-29mips: Floating point convert bug fixChristopher Torng
In mips architecture, floating point convert instructions use the FloatConvertOp format defined in src/arch/mips/isa/formats/fp.isa. The type of the operands in the ISA description file (_sw for signed word, or _sf for signed float, etc.) is used to create a type for the operand in C++. Then the operand is converted using the fpConvert() function in src/arch/mips/utility.cc. If we are converting from a word to a float, and we want to convert 0xffffffff, we expect -1 to be passed into fpConvert(). Instead, we see MAX_INT passed in. Then fpConvert() converts _val_ to MAX_INT in single-precision floating point, and we get the wrong value. To fix it, the signs of the convert operands are being changed from unsigned to signed in the MIPS ISA description. Then, the FloatConvertOp format is being changed to insert a int32_t into the C++ code instead of a uint32_t. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-12-26stats: updates due to bug fixed in mesi coherence protocolNilay Vaish
2013-12-26ruby: fix bugs in mesi cmp directory protocolNilay Vaish
This patch fixes couple of bugs in the L2 controller of the mesi cmp directory protocol. 1. The state MT_I was transitioning to NP on receiving a clean writeback from the L1 controller. This patch makes it inform the directory controller about the writeback. 2. The L2 controller was sending the dirty bit to the L1 controller and the L2 controller used writeback from the L1 controller to update the dirty bit unconditionally. Now, the L1 controller always assumes that the incoming data is clean. The L2 controller updates the dirty bit only when the L1 controller writes to the block. 3. Certain unused functions and events are being removed.
2013-12-20ruby: slicc: replace max_in_port_rank with number of inportsNilay Vaish
This patch replaces max_in_port_rank with the number of inports. The use of max_in_port_rank was causing spurious re-builds and incorrect initialization of variables in ruby related regression tests. This was due to the variable value being used across threads while compiling when it was not meant to be. Since the number of inports is state machine specific value, this problem should get solved.
2013-12-20ruby: declare variables to be unsigned in Address.hhNilay Vaish