| Age | Commit message (Collapse) | Author |
|---|
|
Previously ARM binaries were by default compiled with the MI_example
protocol. The MI_example protocol cannot properly support load/store
exclusive instructions and therefore it cannot be used to simulate
multicore ARM systems. This change changes to MOESI_CMP_directory as
the default ruby protocol for ARM systems.
Change-Id: I942d950ba466aea9a75f3d8764f9f3eddd0c3baa
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2906
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Ruby for ARM systems is not fully supported but certain configurations
are expected to work. This change removes the more general fail
statement and warns or fails depending on the particular
configuration.
Change-Id: Ic24799aff966ba15858b93482e0f24a8672d9483
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2905
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
ARM systems require local exclusive monitors for the implementation of
synchronization primitives between processors. A ruby memory system
needs to forward invalidations to the local exclusive monitors to
to correctly determine their state.
Change-Id: I7bc4d0f2a5be0f4e36a25c87aa4a81a3f086fb3c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2904
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Previously the directory covered a flat address range that always
started from address 0. This change adds a vector of address ranges
with interleaving and hashing that each directory keeps track of and
the necessary flexibility to support systems with non continuous
memory ranges.
Change-Id: I6ea1c629bdf4c5137b7d9c89dbaf6c826adfd977
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2903
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
When it comes time to send a packet with the i8254xGBe model hooked up to
EtherTap and while running in KVM mode, the packet will first go to the
EtherTap over the network style port between them. EtherTap, because it's
not actually a model of anything in the simulation, will immediately pass
the packet off to the real network and report that the transmission was
successful to the i8254xGBe. The i8254xGBe will notice that it still has
stuff it can send (the KVM mode CPU has no trouble keeping it full) and
will, without returning and collapsing the stack, immediately call back
into EtherTap with the next packet. This loop repeats, continually
deepening the stack, until gem5 crashes with a segfault.
To break this loop, a few small changes have been made. First, txFifoTick
has been repurposed slightly so that it continuously keeps track of
whether there's still work to do to flush out the fifo during the current
tick. The code in txWire has been adjusted slightly so that it clears that
variable at the start (also removing some redundancy), so that other code
can set it again if more work needs to be done. Specifically, the
ethTxDone function will set that flag.
If there's more work to be done flushing the Fifo while in tick(), it
will loop until txFifoTick stays cleared, meaning either the Fifo is
empty, or the object on the other end hasn't said it's done yet.
Finally, a new bool member called inTick has been added which keeps track
of whether the tick() function is still active somewhere in the callstack.
If it is, then the tick event shouldn't be rescheduled in ethTxDone, since
tick will take care of that before it returns. It won't check to see if it
needs to, and so without this check there's a panic from scheduling the
same event twice.
It's not completely clear that the Fifo should send packets over and over
as fast as the other side accepts them within the same tick, although it's
not clear that it shouldn't either. If not, then probably all that would
need to change would be to remove the "while" loop so that the tick event
would be rescheduled, and the Fifo would be further emptied the next time
around.
Change-Id: I653379b43389d0539ecfadb3fc6c40e38a8864c2
Reviewed-on: https://gem5-review.googlesource.com/3642
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
gcc has had a lot of problems with incremental linking and partial linking
at the same time. Basically, the partial link assumes that it's the only
link that's going to happen, and it converts weak external symbols into
regular external symbols. Then when the real final link happens, those
symbols are duplicated and the link fails.
Versions of gcc 6 and greater add an option called -flinker-output which
lets you tell the linker to do an incremental link. Unfortunately, other
bugs make that fail, and so gcc 6 doesn't work either. Hopefully version
7 works better.
A --force-lto option was added so that, when only one of lto and partial
linking is available, you can switch from having partial linking to having
lto.
Change-Id: I5e293f5cfb07a14343dc74030d99cb161fb8bbbe
Reviewed-on: https://gem5-review.googlesource.com/3680
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Update the "Hello, world!" executable for RISC-V to use the latest GNU
Linux toolchain and fix the stats accordingly.
Change-Id: I5ff3d7f4bb41b10170038b8c07492f15bb54a022
Reviewed-on: https://gem5-review.googlesource.com/3560
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Fixes broken build after c58537c.
Change-Id: I686ffaaad4fe558b6e51c89c9b26121318c2b721
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/3647
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Some of the macros, notably panic, uses exit(). Callers shouldn't have to
know that or have coincidentally included cstdlib, the provider of exit,
themselves.
Change-Id: I634602ed1795dcc8897b4bddb1167c96763acc18
Reviewed-on: https://gem5-review.googlesource.com/3601
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Fix load_addr_mask in VExpress_GEM5_V1 in order to boot with the 64-bit
kernel.
Change-Id: I13a0a752c60e53262a245cb24b16606071041397
Reviewed-on: https://gem5-review.googlesource.com/3643
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I8027a282c261d29cd276742411eb0ed3ce078247
Reviewed-on: https://gem5-review.googlesource.com/3641
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I498058255a05585e8142bdaa852549e20c27e347
Reviewed-on: https://gem5-review.googlesource.com/3640
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The object is called EtherTap (as opposed to EtherTapStub, what the former
EtherTap was renamed to), and its existance is gated on the linux/if_tun.h
header file existing. That's probably overly strict, but it will hopefully
be minimally likely to break the build for other systems.
Change-Id: Ie03507fadf0d843a4d4d52f283c44a416c6f2a74
Reviewed-on: https://gem5-review.googlesource.com/3646
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
A lot of the implementation of EtherTapStub can be shared with a version
which uses a tap device directly. This change factors out those parts to
accommodate that.
Change-Id: I9c2e31f1be139ca73859a83f05457cef90101006
Reviewed-on: https://gem5-review.googlesource.com/3645
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
The EtherTap object is going to be reworked so that it connects to a tap
device directly, but it's worthwhile to still be able to use the m5tap
utility (util/tap) to send/receive packets on systems which don't support
tap but do support the pcap API. It can also be used to replay ethernet
frames, to capture the ethernet frames coming from gem5 for analysis, to
programmatically consume and/or generate the frames, or even to forward
them to/from a remote system.
Change-Id: Ic7bd763d86cd913ac373dd10a8d6d1fc6b35f95a
Reviewed-on: https://gem5-review.googlesource.com/3644
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
Use printf instead of cprintf to avoid having to have .o files from gem5.
Stop disabling optimization. Placate the style checker by rearranging the
header include order. Include some missing standard headers. Switch from
the deprecated -I- gcc option to using -iquote. Make the "program"
variable a const char *. When checking the return value of getopt, don't
check against the char c which may mask the -1 return value. Instead,
store the return value in an int, and then later cast it to a char when
it's actually consumed.
Change-Id: Ibec51927d0cdbd98db8e53081be2c4931e20333c
Reviewed-on: https://gem5-review.googlesource.com/3600
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
There needs to be a SlavePort called "tap" for the ethertap device to be
able to connect to the gem5 network successfully.
Change-Id: I1ad81219f612fd1ec278c6148af728d20bc916da
Reviewed-on: https://gem5-review.googlesource.com/3580
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
Previously the Sequencer upon a Store Conditional would
unconditionally set the data of the memory location. This change
checks and prevents a failed Store Conditional from modifying any
data.
Change-Id: Id63c9579d8f054f0e95c6d338a7e31aa48762755
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2902
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Previously proxy vector parameters would resolve correctly only for
Parent.all. Any other proxy such as Parent.any, or exact ones such as
Parent.addr_range would resolve to a *vector* of the right value
resulting into a vector of a vector. For example if we set:
DirectoryController0.addr_range = [0x100000-0x1fffff, 0x200000-0x2fffff]
DirectoryMemory0.addr_range = Parent.addr_range
where DirectoryController0 is the parent SimObject of DirectoryMemory0
after unproxying the Parent.addr_range VectorParam we would get
DirectoryMemory0.addr_range = [[0x100000-0x1fffff, 0x200000-0x2fffff]]
This change unifies handling of all three proxies to the same correct
unproxy mechanism.
Change-Id: Ie5107f69f58eb700b3e1b92c55210e0d53e6788d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2901
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I31808b6d7ca2bc2af41deaec747e3a13bd4f77d2
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3261
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Using a wrong offset or memory size may lead to segmentation faults.
This patch adds an address range check and produces an error message.
Change-Id: I79a72c05879266daf61a83367fe4ae386d1958a4
Reviewed-on: https://gem5-review.googlesource.com/3482
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
|
|
* Use one SConstruct to build everything instead of one SConstruct for
each example.
* Introduce SConscripts for sub-directories.
* Build in 'build' instead of the source tree.
* Build and link to SystemC from the ext/systemc directory. This
ensures that SystemC does not need to be installed on the host and
avoids possible issues caused by an incompatible SystemC build.
* Update the README and add some minor fixes
Change-Id: I641ed94f542626864fb7af499ad1be8fd4ad929f
Reviewed-on: https://gem5-review.googlesource.com/3480
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The existing scripts were including pthread code and QT code at the same
time, and also insisting on an having a set of architecture specific
source files for whatever the current architecture is.
This change selects using either QT or pthreads based on the host
architecture, distributes accumulating source files, list source files
explicitly (to avoid including redundant coroutine libraries) and makes
scons insist on an architecture specific QT implementation only if QT is
being used. It also defines a preprocessor symbol which tells some headers
whether or not pthreads are being used, and also clones the scons
environment to avoid leaking flags into the main environment used to
compile gem5 itself.
If the host architecture isn't supported by systemc, a warning will be
printed, and the various build products and SConscript files will be
skipped over.
Change-Id: I1a40123a11e49e02922a054f093246cf197087bf
Reviewed-on: https://gem5-review.googlesource.com/3461
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Christian Menard <christian.menard@tu-dresden.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Remove redundant information from the ExtMachInst, hash the vex
information to ensure the decode cache works properly, print the vex info
when printing an ExtMachInst, consider the vex info when comparing two
ExtMachInsts, fold the info from the vex prefixes into existing settings,
remove redundant decode code, handle vex prefixes one byte at a time and
don't bother building up the entire prefix, and let instructions that care
about vex use it in their implementation, instead of developing an entire
parallel decode tree.
This also eliminates the error prone vex immediate decode table which was
incomplete and would result in an out of bounds access for incorrectly
encoded instructions or when the CPU was mispeculating, as it was (as far
as I can tell) redundant with the tables that already existed for two and
three byte opcodes. There were differences, but I think those may have
been mistakes based on the documentation I found.
Also, in 32 bit mode, the VEX prefixes might actually be LDS or LES
instructions which are still legal in that mode. A valid VEX prefix would
look like an LDS/LES with an otherwise invalid modrm encoding, so use that
as a signal to abort processing the VEX and turn the instruction into an
LES/LDS as appropriate.
Change-Id: Icb367eaaa35590692df1c98862f315da4c139f5c
Reviewed-on: https://gem5-review.googlesource.com/3501
Reviewed-by: Joe Gross <joe.gross@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When the LiveProcess class was renamed to be just Process, the CL author
also changed the syscall function from a virtual function into a regular
one. Unfortunately, the I386Process class overrode the syscall function
to adjust the return address so that control would return to the right
place. Without that adjustment, 32 bit x86 process would segfault and die
immediately after their first system call.
This change reinstates the virtual specifier on the base syscall function,
and adds an override keyword on the I386Process's version so that it won't
be orphaned again in the future. It also fixes some small style issues the
style checker script complained about.
Change-Id: I0d1178ea0eda6676050c8fc043820a2bb4d99c0d
Reviewed-on: https://gem5-review.googlesource.com/3500
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I318c185b117b9608110544526fbaaa3fdcdeb8bc
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3260
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The PMU model currently doesn't calculate the PMU event counter index
correctly for writes to the PMEVTYPER[0-5]_EL0 registers. Fix this
obvious mistake.
Change-Id: I2913eedddeb98480660e2d63948f6d727adf5ab8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3121
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
The current implementation of reference counting for PyEvents only
partially works. The native object is currently kept alive while it is
in the event queue. However, if the Python object goes out of scope,
the Python side of this object is garbage collected which leaves a
"dangling" native object. This results in confusing error messages
where PyBind is unable to find the Python implementation of an event
when it is triggered.
Implement reference counting using the generalized reference counting
API instead.
Change-Id: I4e8e04abc4f61dff238d718065f5371e73b38ab3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3222
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
We currently only support deleting an event if it is triggered and not
re-scheduled. This is fine for most native code. However, there are
cases where Python needs to count references to make sure that the
Python object stays live while the native object is live.
Generalise the mechanism used to implement by adding reference
counting hooks to the event base class:
* Event::acquire() / Event::acquireImpl()
* Event::release() / Event::releaseImpl()
These calls can be used to implement both reference counting and the
existing AutoDelete functionality. The default implementation in Event
maintains backwards compatibility with the existing AutoDelete feature
by ignoring acquireImpl() and deleting the event on releaseImpl() if
it isn't scheduled anymore.
Since AutoDelete functionality is no longer the only way events can be
managed, this change introduces the new Managed flag. This flag
activates automatic memory management. The acquireImpl()/releaseImpl()
methods are only called from acquire()/release() it is set. To
maintain backwards compatibility, AutoDelete is used as an alias for
Managed.
Change-Id: I5637984c906a9d44c22780712cf1c521b8297149
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3221
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes a problem with RISC-V initial stack setup in SE mode
where the AT_RANDOM aux vector value contains an address that is too
close to the top of the stack and doesn't fit the required 16 bytes. To
fix this, the program header table was added to the top of the stack
just like the RISC-V proxy kernel does.
Change-Id: I814562e060ff041cd0d7a7c54c3685645bd325a3
Reviewed-on: https://gem5-review.googlesource.com/3401
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
The ISA code for ARM calculates min and max elements for types using
bit manipulation. That triggers some warnings, treated as errors, as
the compiler can tell that there is an overflow and the sign
flips. Fixed using standard lib definitions instead.
Change-Id: Ie2331b410c7f76d4bd87da5afe9edf20c8ac91b3
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3481
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I16870dec402d661295f9d013dc23e362b2b2c169
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3225
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The PyBind wrappers could potentially delete SimObjects if they don't
have any references. This is not desirable since there could be
pointers to such objects within the C++ world. This problem doesn't
normally occur since Python typically holds a pointer to the root node
as long as the simulator is running.
Prevent SimObject and Param deletion by using a PyBind-prescribed
unique_ptr with a dummy deleter as the pointer wrapper for the Python
world.
Change-Id: Ied14602c9ee69a083a69c5dae1b5fcf8efb4548a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3224
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
There is a weird issue with the PyBind wrapper of
vector<AddrRange>. Assigning new values to a param that is a vector of
AddrRange sometimes results in an out-of-bounds memory access.
We work around this issue by treating AddrRange vectors as opaque
types. This slightly changes the semantics of the wrapper since Python
now manipulates the real object rather than a copy that has been
converted to a list.
Change-Id: Ie027c06e7a7262214b43b19a76b24fe4b20426c5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Timothy Hayes <timothy.hayes@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3223
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The SConstruct currently expects all explicit targets to be under a
variant directory like ARM or X86 which tells it what settings to use,
etc. There are things which scons knows how to build however, which do not
live under a variant directory, specifically everything under ext.
This change makes scons not look for a variant directory when it
encounters a target which is built by something in ext. This enables
things like explicitly building the systemc libraries, for example.
Change-Id: I8982a96fe49e3cb970ec78e11cea08703990c686
Reviewed-on: https://gem5-review.googlesource.com/3460
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Christian Menard <christian.menard@tu-dresden.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The readline module is imported by main.py but doesn't seem to be
used.
Change-Id: I7888e3b6ad0a0fedc14b0feec2adf0a39883bbf8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3421
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Compiling gem5 with recent version of clang (4 and 5) triggers
warnings that are treated as errors:
* Global templatized static functions result in a warning if they
are not used. These should either be declared as static inline or
without the static identifier to avoid the warning.
* Some templatized classes contain static variables. The
instantiated versions of these variables / templates need to be
explicitly declared to avoid a compiler warning.
Change-Id: Ie8261144836e94ebab7ea04ccccb90927672c257
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3420
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.
Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I2a146ae57aac3787389997961208474a97e7c155
Reviewed-on: https://gem5-review.googlesource.com/3360
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
CPU aliases have been dropped, this change fixes the big.LITTLE example.
Change-Id: Idd59a6eca93448ef0e23087365fb5452bcef9247
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-on: https://gem5-review.googlesource.com/3300
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch enables using calibrated big and LITTLE cores, ex5_big and
ex5_LITTLE instead of the default 'arm_detailed' and 'minor' cpus. The ex5
model is based on the Samsung Exynos 5 Octa (5422) SoC. Operation and memory
hierarchy latencies have been calibrated using the lmbench micro-benchmark
suite. The preliminary validation results have been published as: 'Full-System
Simulation of big.LITTLE Multicore Architecture for Performance and Energy
Exploration', in International Symposium on Embedded Multicore/Many-core
Systems-on-Chip (MCSoC'16), Lyon, France (Sep, 2016).
From http://reviews.gem5.org/r/3666
Change-Id: I4935dee0a9222bd1bf7adfccb9443014945bb2d7
Signed-off-by: Anastasiia Butko <abutko@lbl.gov>
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-on: https://gem5-review.googlesource.com/2464
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
In the past it happened several times that some changes in gem5 broke the
SystemC coupling. Recently Accelera has changed the licence for SystemC
from their own licence to Apache2.0, which is compatible with gem5.
However, SystemC usually relies on the Boost library, but I was able to
exchange the boost calls by c++11 alternatives. The recent SystemC version
is placed into /ext and is integrated into gem5's build system. The goal is
to integrate some SystemC tests for the CI in some following patches.
Change-Id: I4b66ec806b5e3cffc1d7c85d3735ff4fa5b31fd0
Reviewed-on: https://gem5-review.googlesource.com/2240
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
necessary kernel command line options in FSConfig.py
Change-Id: Id66f640b6beb4efa9c23080c3d2516eda688c72d
Reviewed-on: https://gem5-review.googlesource.com/3320
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the operands were 64 bit, an intermediate calculation could lose a
carry bit. This change rearranges that intermediate calculation if the
operand width is large, and reworks the microop implementation in general
in an attempt to make it easier to understand.
Change-Id: Ib36333f3f2695a33cd9623e43682de22ebd2e7ea
Reviewed-on: https://gem5-review.googlesource.com/3381
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Add a helper function, m5.event.create(), to create events from
Python. This function takes a callable Python object (e.g., a
function) as an argument and optionally a priority as a keyword
argument. This function was accidentally dropped from the public API
when switching to PyBind.
Change-Id: Icbd0e392d9506934ec2c9f541199aa35c1c2df8c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3220
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The style checker complains about line length and ordering for these
files. This fix should make these two files kosher.
Change-Id: I822a0518a98d9e379a543d2017e90c4e9666a58d
Reviewed-on: https://gem5-review.googlesource.com/3380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
If a (regular) store is followed closely enough by a locked load that
overlaps, the LSQ will forward the store's data to the locked load and
never tell the cache about the locked load. As a result, the cache will
not lock the address and all future store-conditional requests on that
address will fail. This patch fixes that by preventing forwarding if
the memory request is a locked load and adding another case to the LSQ
forwarding logic that delays the locked load request if a store in the
LSQ contains all or part of the data that is requested.
[Merge second and last if blocks because their bodies are the same.]
Change-Id: I895cc2b9570035267bdf6ae3fdc8a09049969841
Reviewed-on: https://gem5-review.googlesource.com/2400
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
We don't implement the GICD_IGROUPRn registers, which is allowed, but
to be correct, they should be RAZ/WI (read as zero, writes ignored).
Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the client does something bad, don't kill the whole simulation, just
complain, drop the client and keep going.
Change-Id: I824f2d121e2fe03cdf4323a25c192b68e0370acc
Reviewed-on: https://gem5-review.googlesource.com/3200
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Currently, if the remote gdb stub fails to read a byte from an incoming
packet because the connection has been dropped, the read call will return
anyway and the calling code will have no way to know something bad
happened. It might reattempt the read over and over again waiting for some
particular byte, doomed to never make forward progress.
This change modifies the remote GDB code so that if a read or write call
fails, it will instead detach from the debugger and continue. Before this
change, When simulating a port scan, ie connecting to the debugger port
and then immediately dropping the connection using this command:
nc -v -n -z -w 1 127.0.0.1 7000
gem5 would enter the previously described death spiral. After it, gem5
detaches from the bad connection and resumes execution. Subsequently
attaching with gdb was successful.
This code is written in a C centric style, and would benefit from some
refactoring.
Change-Id: Ie3c0bb35b9cfe3671d0f731e3907548bae0d292f
Reviewed-on: https://gem5-review.googlesource.com/3180
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
