| Age | Commit message (Collapse) | Author |
|---|
|
GCC 8 adds a number of new warnings to -Wall which generate errors.
- Fix memset to 0 for structs by adding casts.
- Fix cast with const when the const was ignored.
- Fix catch a polymorphic type by value
We now compile with GCC 8!
Change-Id: Iab70ce11190eee67608fc25c0bedff170152b153
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/11949
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
GCC 8's -Wcast-function-type didn't like this line in pybind. Rather
than updating pybind to the HEAD, we'll wait for a new release. The last
release was in April and didn't include this change.
See https://github.com/pybind/pybind11/pull/1396.
Change-Id: I199c3023487d5a73a745396df8e7fcd6635a146c
Reported-by: Thawra Kadeed <kadeed@ida.ing.tu-bs.de>
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/11909
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
The script diffs an upstream branch and a feature branch to find
all files which have been changed between the branches. It then
searches for all the corresponding changesets and binds them to
the files in the output.
The tool's output resembles the following:
/path/to/file/
filename
git-hash
git-hash
filename
git-hash
/path/to/file/
filename
git-hash
Change-Id: Icd67953748f38dad984488c5445313eaa56fa202
Reviewed-on: https://gem5-review.googlesource.com/7861
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
Do not generate garnet tester file or Ruby debug headers without a Ruby
protocol (i.e. PROTOCOL=None). It makes no sense to include these files
into the build when there will be no protocol to utilize them.
Change-Id: I8db4dd532f60008217a10c88a2e089f85df9d104
Reviewed-on: https://gem5-review.googlesource.com/8381
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Add a test to print out stack contents for SE mode programs.
The test will print out argc, argv, envp, and some auxiliary
vectors.
Change-Id: I489d752ee40fde24c531d8918d0c050f4df936c5
Reviewed-on: https://gem5-review.googlesource.com/3440
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The commented code contains bitrot. It is not clear how to fix the code
so remove it.
The code will not compile if the preprocessor defines are removed. The
llocker and uulocker variables that are used as indices into the
persistent_randomize array are undefined. It's not clear what they should
be from the current code.
5ab13e2deb shows when the lines were last modified. The functionality
contained in the comments probably have not been used since that time.
(This is an example of why one should never add commented code that
is enabled by removing defines. The code rots and sits in the source
forever.)
Change-Id: I3e0e7c9afc0b6088130e6f319075809fb6f16e5a
Reviewed-on: https://gem5-review.googlesource.com/8481
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The gpu_dyn_inst.hh file was missing a clone method from
inherited classes. (The clone method is the way to implement
the prototype design pattern.) Because the inherited clone
method was declare as pure virtual, the method needed to
be implemented. Otherwise, the compiler complains that the
class is abstract.
Change-Id: I38782d5f7379f32be886401f7c127fe60d2f8811
Reviewed-on: https://gem5-review.googlesource.com/12108
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
683f411dca introduced changes to the addr_range_map's
"find" method. Nikos replaced the relevant code with a new
"contains" method. Propagate the changes to the gpu-compute
code.
Change-Id: I8cfe3b15cbfb476685b0ed5ba423ea5a8f1000d8
Reviewed-on: https://gem5-review.googlesource.com/12107
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Change-Id: Ia613ab580b880a463c9cf0dd63f61497db31fe75
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/10121
|
|
Change-Id: I92a589b267ce659b6fbcf710043436b84fcb1c63
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/4423
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Change-Id: I0753db61d6344b9ed95c0d90a1ab097de7e2af12
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/4422
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
This adds Makefiles for hello for ARM and x86 by leveraging docker and
dockcross. See https://github.com/dockcross/dockcross for more
information.
These Makefiles also allow for automatic uploading to the correct location
for users to download when running the new tests.
Change-Id: I7085000393cd5283502a7af362c85befda749181
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4883
|
|
Change-Id: Id62ad8e452e640073079e76c9ce5898c8888edee
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/4882
|
|
The new test library is split into two parts: The framework which resides
in ext/, and the gem5 helping components in /tests/gem5.
Change-Id: Ib4f3ae8d7eb96a7306335a3e739b7e8041aa99b9
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/4421
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Update the hello test to have a sane return code.
Change-Id: I9576b71ee995d8aa410c4ed19d44cc4e9fad10ee
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4881
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Update simulation.py to always exit with code 0 assuming the simulation
exits normally. If the running application has a return code that is non
zero, then print the return code before exiting.
Change-Id: I1983985d50311627574d4364b32ee961ae88e003
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4880
|
|
These macros need to expand to some minimal amount of wrapping code to
make the regression tests syntactically legal and compile.
Change-Id: I0b5569704b129d9c315526fc3363ef846a1b5c65
Reviewed-on: https://gem5-review.googlesource.com/11184
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Add in two deprecated typedefs, and a deprecated constructor. These
are necessary to get the regressions to build.
Change-Id: Id8320a67c680acbca0abaee9898158ffd2678d67
Reviewed-on: https://gem5-review.googlesource.com/11183
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These overloads of sc_trace take the unsigned version of some primitive
types. The compiler thought it was ambiguous how to convert an unsigned
integer value into a signed one since there were several different
functions which took signed integer parameters of various sizes.
These versions of sc_trace aren't in the standard, but they are in the
Accellera implementation and do fix building of the regression tests.
Change-Id: I26fd06d90ae6bf5fc5aed24bc2ac826ad69eee31
Reviewed-on: https://gem5-review.googlesource.com/11182
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The tests were referring to constants defined in the Accellera systemc
implementation which identified various log message types. This change
replaces those (sometimes quite long) string constants with their
actual value. This doesn't make that interface any more fragile since
the constant value won't track between the Accellera version and this
one, but it does make its fragility more explicit by using the value
directly.
If in the future we decide to hide the magical nature of those
particular string constants, we could make them into our own constants
in the implementation. Regardless, the tests shouldn't refer to
internal details of the implementation.
Change-Id: I116a7407fcac49367649b250683117f3ccf4f9ed
Reviewed-on: https://gem5-review.googlesource.com/11181
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The spec defines these constants to be macros, but the regression test
refers to them using the sc_core namespace. That breaks things because
the macros don't expand to an identifier, they expand to an expression.
This change converts the macros into enums like in the Accellera
implementation to get the regression tests to build.
Change-Id: I3db7dc87a7a597907df658624a7343bc6ca1734e
Reviewed-on: https://gem5-review.googlesource.com/11180
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Some more tests were including Accellera headers specifically, even
after including systemc.h which would bring those headers in alongside
all the others.
Change-Id: Ib2db0a410e0ecea0035b636e8dd04c85045b8578
Reviewed-on: https://gem5-review.googlesource.com/11179
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The systemc spec says that sc_bind, sc_ref and sc_cref macros should
expand to boost::bind, boost::ref, and boost::cref respectively, but
that it's "use is not mandantory". Unfortunately, the regression tests
use those macros without actually including the boost headers for
themselves, and so they won't compile without dragging in these boost
headers as a dependency.
This should be mostly ok to include here since gem5 itself shouldn't
include systemc, just the sub headers that systemc brings in. systemc
code which includes systemc *will* have a dependency on boost, but that
at least contains the new dependency somewhat.
Change-Id: I1877a1b7dae2952f30a9d577d778739abbe7ac3b
Reviewed-on: https://gem5-review.googlesource.com/11178
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The iterator class needs to have some operators, etc., defined so that
tests written against it can compile correctly. The implementations
were heavily influenced by the Accellera implementation.
Also it should be noted that the systemc spec is incorrect where it
defines these classes. When implemented like they are in the
Accellera version, the versions of bind in sc_vector_assembly which
take sc_vector<T>::iterator and iterator parameters are different, and
so they can overload each other. If implemented as described by the
spec however, those types are the same and the code won't compile.
Change-Id: I62852adf7e6c0a2f3df076ba4e93d2501859c32d
Reviewed-on: https://gem5-review.googlesource.com/11177
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The sc_vector class is available through systemc.h already, so there's
no reason to include an internal path which is only there on Accellera
by coincidence of the implementation.
Change-Id: I41cab4711c0837cd9b20c21871b79be5165bf498
Reviewed-on: https://gem5-review.googlesource.com/11176
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The only required option for the script is the path to a build
directory, for instance build/ARM. It uses that when running scons and
when referring to generated files (like the built versions of the
tests). It uses the location of the script itself to find source files,
like the "golden" version of outputs.
This script runs tests in three phases, compilation, running, and
then verification. By default, all three phases are run for all tests,
but which phases run and how they work can be customized by specifying
them explicitly on the command line with the --phase option.
Each time the --phase option shows up on the command line, it should
be followed by the name of the phase being specified. That both
declares that that phase should be run, and also that any subsequent
options apply to that phase, at least until the next --phase option.
Currently, only the "compile" and "execute" phases are implemented, and
only the "compile" phase has been tested at all or has any options
defined. The "compile" phase simply takes all the options it was given
and pass them on to scons. The "verify" phase simply prints a message
which says what it would have verified.
The script can list the available tests with the --list option, as
determined by the json systemc test manifest file which scons can
generate, and which the script can refresh if passed the --update-json
option. You can also specify what "flavor" of build you want to do, ie
opt, debug, fast, etc., with the --flavor option. Only one flavor can
be tested at a time, but that should be the desired behavior most of
the time. If multiple flavors need to be tested, the script can be
invoked multiple times.
Finally, there is a --filter option which accepts a python expression
as a string. That expression is evaluated in the namespace of the
properties of each test in the json file, and if it returns true then
that test is run. For instance, to verify only compile_only tests, you
would use:
systemc/tests/verify.py build/ARM --filter 'compile_only'
To test only compile_only tests named bob, you would run this:
systemc/tests/verify.py build/ARM --filter \
'compile_only && name ="bob"'
Also included is a simple config.py which is the beginning of a config
which will run the systemc regression tests. Right now, all it knows
how to do is run sc_main.
Change-Id: I62666be8b1622d1355153e623b4274a939507e44
Reviewed-on: https://gem5-review.googlesource.com/10975
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Otherwise, having hundreds of statically linked gem5s takes up a huge
amount of space, and all those repeated linkings brings the mightiest
workstation to its knees with sufficient parallelism, or will take
forever without it.
Change-Id: I4c358b1a50c5e2b0027ac72423f887e24c786b19
Reviewed-on: https://gem5-review.googlesource.com/10959
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These are needed by... you guessed it, the regression tests.
Change-Id: Id30e71944cc7f3faca7dcb197f37938368364fcd
Reviewed-on: https://gem5-review.googlesource.com/10958
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The standard says there's not supposed to be a default writer policy
for the sc_buffer template class, but in the Accellera implementation
there is, and the regression tests depend on it to compile.
Change-Id: I31d17617441224e86c56c54e45364be8f4f45b00
Reviewed-on: https://gem5-review.googlesource.com/10957
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This mechanism scans the systemc test directories as described in their
original distribution. It tells scons how to build each test
executable, and also how to build a json manifest file which
lists all the tests and some properties about them.
Change-Id: I8ebc748c1aed71f0bb76e04a2040f15abd2837d9
Reviewed-on: https://gem5-review.googlesource.com/10956
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This is needed by the regression tests.
Change-Id: I5666cf9ad445869e74edda857afd59ab7ece4f4c
Reviewed-on: https://gem5-review.googlesource.com/10955
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The regression tests use this function. In the Accellera implementation
it seems to just do some error checking, so our version doesn't do
anything for now.
Change-Id: Icaad45e934bad69e301bc0234f73e69791940736
Reviewed-on: https://gem5-review.googlesource.com/10854
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: I5f7f64d6c3d7e08ec6d2529f3c5d84fbfc2c421b
Reviewed-on: https://gem5-review.googlesource.com/10850
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The fiber will run until either sc_main returns, or until sc_start is
called. If sc_start is called, then the fiber will only be paused and
waiting for simulation cycles to be run by gem5. Once sc_pause and
sc_stop are implemented, if those are called the sc_main fiber will
be re-entered and allowed to run further towards completion.
Change-Id: I4df94f4f6fed8d49471732619a203d734d9a13a6
Reviewed-on: https://gem5-review.googlesource.com/10849
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These functions just read or write values with minimal amounts of
logic.
Change-Id: I22d5b49a2550a88a854d1619f08b0055c1312271
Reviewed-on: https://gem5-review.googlesource.com/10847
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: Ifc8c8d4a7bb6e941485e80f4884cfa4bb648c17c
Reviewed-on: https://gem5-review.googlesource.com/10846
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
For forward compatibility with later compilers, we should have a greater
than comparison instead of an explicit equality with a particular C++
version.
Change-Id: If848097420b9575f80134986410da3dab32567da
Signed-off-by: Bradley Wang <radwang@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/11871
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Having a hash function defined within the header will allow all
classes using RegId to use the class as a Key in a STL
unordered_map.
Change-Id: I32fd302a087c74e844dcbfce93fef9d0ed98d6bf
Signed-off-by: Bradley Wang <radwang@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/11870
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Previously, reg_class_impl.hh was added in order to prevent a cyclic
dependency between it and the_isa.hh (See
http://reviews.gem5.org/r/3754). It was determined that this was not
necessary. The two files had almost entirely the same includes, and the
current test-suite including multiple gcc and clang compilers on both
MacOS and Linux successfully built the library with all functionality
moved into the reg_class.hh file.
Change-Id: I0319e187b9eb280726a003951bb1ce315ffe17f5
Signed-off-by: Bradley Wang <radwang@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/11869
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Please note that at the moment these instructions behave like the
existing load-acquire instructions, which follow the more conservative
RCsc consistency model. This means that the new instructions are
_functionally_ correct, but the potential performance improvements
enabled by the RCpc model will not be experienced in timing
simulations.
Change-Id: I04c786ad2941072bf28feba7d2ec6e142c8b74cb
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11989
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Change-Id: Iad76b398949a55d768a34d027a2d8e3739953da6
Reviewed-on: https://gem5-review.googlesource.com/10845
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These files have been cleaned up style wise, and some macros have been
resolved like they were for the header files.
Change-Id: I447e5311961036847e7da0c5a86c0da25a633010
Reviewed-on: https://gem5-review.googlesource.com/10844
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These are the headers originally written by Accellera with a few
modifications. Most significantly, I went through and mostly (but not
entirely) manually editted them to conform to gem5 style and to be
more self consistent. Second, I resolved some macros which optionally
select features. I removed support for deprecated functions, and
otherwise enabled everything.
The actual implementation behind these headers will also be ported
over, but in a subsequent change.
Change-Id: I203d3f6c8a3af9120b946001d01defbb0643a6b6
Reviewed-on: https://gem5-review.googlesource.com/10843
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: I9e9724edb6281e0b0a6bae5546b0ede77d295c12
Reviewed-on: https://gem5-review.googlesource.com/10841
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The branch predictor currently assumes that each CPU has a branch
predictor. This isn't true in some cases (e.g., KVM, Atomic).
Change-Id: I61e80dca940c2dadba1b812449691c9dba1c06d9
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11520
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
This patch adds the uret, sret, and mret instructions for use with
returning from user-, supervisor-, and machine-level code, respectively.
These instructions read the STATUS register to determine the previous
privilege level and modify it to re-enable interrupts at the old
privilege level. These instructions can only be executed at the
corresponding privilege level or higher.
Change-Id: I6125c31cb2fdcc3f83eca86910519e81ffbbbfc9
Reviewed-on: https://gem5-review.googlesource.com/11136
Maintainer: Alec Roelke <alec.roelke@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Robert Scheffel <robert.scheffel1@tu-dresden.de>
|
|
RISC-V has a set of CSRs that contain information about a trap that was
taken into each privilegel level, such as illegal instruction bytes or
faulting address. This patch adds that register, modifies existing
faults to make use of it, and adds a new fault for future use with
handling page faults and bad addresses.
Change-Id: I3004bd7b907e7dc75e5f1a8452a1d74796a7a551
Reviewed-on: https://gem5-review.googlesource.com/11135
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
|
|
This patch adds support for handling RISC-V faults, including tracking
current and previous execution privilege, correctly switching to
the privilege mode specified by CSRs, and setting/storing the PC. It
also includes changes introduced by patch #9821, which disables
interrupts during handling of a fault.
Change-Id: Ie9c0f29719620c20783540d3bdb2db44f6114fc9
Reviewed-on: https://gem5-review.googlesource.com/9161
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I39b5a784a056195a5e71fd21b3abb5fc91ab70e7
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/11872
|
|
ucontext functions (like getcontext, setcontext etc) have been marked
as deprecated and are hence hidden in latest macOS releases.
This patch uncovers them; warnings wil be produced but compilation
won't fail since -Wno-error=deprecated-declarations flag is currently
used.
Change-Id: Ic10e6f77a38875828b1891eaed2f0626ecffff67
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11729
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
