summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-15cpu: fix problem with forwarding and locked loadAlec Roelke
If a (regular) store is followed closely enough by a locked load that overlaps, the LSQ will forward the store's data to the locked load and never tell the cache about the locked load. As a result, the cache will not lock the address and all future store-conditional requests on that address will fail. This patch fixes that by preventing forwarding if the memory request is a locked load and adding another case to the LSQ forwarding logic that delays the locked load request if a store in the LSQ contains all or part of the data that is requested. [Merge second and last if blocks because their bodies are the same.] Change-Id: I895cc2b9570035267bdf6ae3fdc8a09049969841 Reviewed-on: https://gem5-review.googlesource.com/2400 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-15arm, dev: stub out GIC distributor interrupt groupsCurtis Dunham
We don't implement the GICD_IGROUPRn registers, which is allowed, but to be correct, they should be RAZ/WI (read as zero, writes ignored). Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2620 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-12base: Make the VNC server more resilient.Gabe Black
If the client does something bad, don't kill the whole simulation, just complain, drop the client and keep going. Change-Id: I824f2d121e2fe03cdf4323a25c192b68e0370acc Reviewed-on: https://gem5-review.googlesource.com/3200 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-12misc: Make the remote GDB stub more resilient to bad connections.Gabe Black
Currently, if the remote gdb stub fails to read a byte from an incoming packet because the connection has been dropped, the read call will return anyway and the calling code will have no way to know something bad happened. It might reattempt the read over and over again waiting for some particular byte, doomed to never make forward progress. This change modifies the remote GDB code so that if a read or write call fails, it will instead detach from the debugger and continue. Before this change, When simulating a port scan, ie connecting to the debugger port and then immediately dropping the connection using this command: nc -v -n -z -w 1 127.0.0.1 7000 gem5 would enter the previously described death spiral. After it, gem5 detaches from the bad connection and resumes execution. Subsequently attaching with gdb was successful. This code is written in a C centric style, and would benefit from some refactoring. Change-Id: Ie3c0bb35b9cfe3671d0f731e3907548bae0d292f Reviewed-on: https://gem5-review.googlesource.com/3180 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-12syscall_emul: Fix undefined macro behaviorAndreas Sandberg
Clang's UBSAN implementation complains about macros that expand to expressions that contain 'defined'. Explicitly set the various feature macros to 1 or 0 to avoid this issue. Change-Id: Iba239dacfe526c43ab9c5da5183a350fc4fdc57d Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3241
2017-05-12arm: Remove unused DumpStatsPCEventF class in FreeBSD systemAndreas Sandberg
The DumpStatsPCEventF is declared but lacks an implementation. This confuses RTTI in clang. Remove this class since it is clearly not needed. Change-Id: Ib95f09f2ba8593f8d0e072b96afd5f8a9ed31070 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3240 Reviewed-by: B.A. Zeeb <baz21@cam.ac.uk>
2017-05-10scons: Use the generalized switching headers on the GPU ISA.Gabe Black
Now that the switching header implementation has been generalized, there's no need to have two nearly identical implementations for the two different groups of headers. Change-Id: Ie7c24fcddbc672ac5ca2d69bfc35696f42c55580 Reviewed-on: https://gem5-review.googlesource.com/2984 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-05-10scons: arch: Generalize the switching header code.Gabe Black
Factor out the ISA ness of the switching header generating function. Also turn it into a SCons builder which builds a single header, and a wrapping method which uses the builder on a group of header files which all target the same subdirectory. Change-Id: I87705f97b6ebd9baebd4ebcfea19cc1218a64ad0 Reviewed-on: https://gem5-review.googlesource.com/2983 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-09config: Fix up some configs to not use CPU aliases.Gabe Black
Support for CPU aliases were removed recently. Change-Id: I3c1173dc34170d8639d95e52bf660f248848f77f Reviewed-on: https://gem5-review.googlesource.com/3100 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-09scons: Get rid of the all_isa_deps variable.Gabe Black
This value can be computed more directly and more locally near where it's used. Change-Id: Ib5f45015494a6c8033ce0ac4b8931688f37492c8 Reviewed-on: https://gem5-review.googlesource.com/2982 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-05-09misc: Add the --listener-loopback-only command line option.Gabe Black
This option invokes the Listener::loopbackOnly() static function which will make the port listeners bind to the loopback device exclusively and ignore connections on other devices. That prevents external agents like port scanners from disrupting simulations with spurious connections. Change-Id: I46b22165046792a6f970826c109bdbce7db25c84 Reviewed-on: https://gem5-review.googlesource.com/3082 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-09misc: Expose the listener loopbackOnly function to python.Gabe Black
Change-Id: Ibb405af54a46a93706a6f476b5314491e84be0c8 Reviewed-on: https://gem5-review.googlesource.com/3081 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-09base: Teach the socket listeners how to bind to the loopback.Gabe Black
The loopback device will allow access to various services like remote GDB debugging, connecting to the terminal, etc., without letting external agents like port scanners connect and disrupting the simulation. Change-Id: I76dccbf152fa278ae9f342b25f7e345a1329fbe4 Reviewed-on: https://gem5-review.googlesource.com/3080 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-09style: Treat PyBind headers as Python headersAndreas Sandberg
Some PyBind11 headers need to include Python.h. This means that we need to include PyBind11 headers before any standard library headers. Enforce this by applying the Python.hh rules for anything in pybind11/. Change-Id: Id175a4f613960a17f84f98b81bfd02806e905d5a Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3120 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2017-05-09python: Fix debug flag listing regressionAndreas Sandberg
The PyBind11 changes slightly modified gem5's internal debug interfaces. The corresponding change to the public API went missing before the new bindings were merged. This change updates the Python glue to use the new interface. Change-Id: I3ecca5a3f6c35b99d55126d697371124f81a12dd Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3140 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-05-09util, arm: Support mmapped m5ops on aarch64Andreas Sandberg
Add support for memory-mapped m5ops in the aarch64 version of the m5 utility. To enable support for memory-mapped m5ops, compile the tool with the define M5OP_ADDR set to the base of the m5op PA range. Change-Id: I13e21e48536b9849bf4081411b66b2f350f7a8ac Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2966
2017-05-09arm: Enable m5ops by default for VExpress_GEM5_V1Andreas Sandberg
Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part of the CS5 address range in the RS1/RS2 memory map. Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2965
2017-05-09arm: Add support for memory-mapped m5opsAndreas Sandberg
Add support for a memory mapped m5op interface. When enabled, the TLB intercepts accesses in the 64KiB region designated by the ArmTLB.m5ops_base parameter. An access to this range maps to a specific m5op call. The upper 8 bits of the offset into the range denote the m5op function to call and the lower 8 bits denote the subfunction. Change-Id: I55fd8ac1afef4c3cc423b973870c9fe600a843a2 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2964
2017-05-09kvm, arm: Fix incorrect PSTATE syncAndreas Sandberg
The state transfer code wasn't reading back PSTATE correctly from the CPU prior to updating the thread context and was incorreclty writing the register as a 32-bit value when updating KVM. Correctly read back the state before updating gem5's view of PSTATE and cast the value to a uint64_t. Change-Id: I0a6ff5b77b897c756b20a20f65c420f42386360f Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2963 Reviewed-by: Rahul Thakur <rjthakur@google.com>
2017-05-09util: Correctly handle short writes in m5 (read|exec)fileAndreas Sandberg
The m5 tool has subcommands that writes a file to the simulated file system. The implementation of this command currently doesn't check the return value from write, which leads to compiler warnings and potentially incorrect behavior. Add the necessary checks. Change-Id: If558534d3245aa24cf15edf06bd0af4c6ba3908c Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2962 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com>
2017-05-09util: Add the m5_loadsymbol pseudo op to the m5 toolAndreas Sandberg
Change-Id: Ib8bf4eac77170db8b2bf44796fd9d46b02217d03 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3122 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com>
2017-05-09util: Fix incorrect use of m5_loadsymbolAndreas Sandberg
It seems like the m5 utility incorrectly called m5_loadsymbol instead of m5_addsymbol. Judging by the signature of the loadsymbol command, the expected behavior is to add a new symbol to gem5's symbol table. This is behavior is implemented by m5_addsymbol. Change-Id: I83b61c48d6f8d7b1e8b57d884dfca00481c83c3a Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2961 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-05-09misc: fix build failure in cxx_config examplePaul Rosenfeld
Fix a missing header in the cxx_config example which is used as a simple example of using libgem5.so without python. Change-Id: I758bfe42ba735ce0c7eaedd49b94a130e3bd21e3 Reviewed-on: https://gem5-review.googlesource.com/3000 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-08scons: Get rid of the PHONY_BASE construction variable.Gabe Black
The value of that variable can be computed more directly and more locally to where it's consumed. Change-Id: I5ca1f732a34e22d4dae2aeb6ee7fc8adebe1caa0 Reviewed-on: https://gem5-review.googlesource.com/2981 Maintainer: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-05-08util: Fix incorrect return type in m5 writefileAndreas Sandberg
Change-Id: Ic24a1c3c1488e970ed27bb6b99262d201f535384 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2960 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-05-08scons: Replace str(foo.get_contents()) with foo.get_text_contents().Gabe Black
For Value() nodes, the get_contents() method and the get_text_contents() method are just aliases to the same thing, both of which return a value which has already been converted using str(). The str() which was included explicitly in the SConscript was redundant, except that it showed that the value from get_contents was being treated as a string. To avoid the redundancy but to still leave a hint to the value's type, this change converts those bits of code to use get_text_contents() and removes the str(). Change-Id: I8f7da9b652f749e741b553c9a0e2248ae15ec3ca Reviewed-on: https://gem5-review.googlesource.com/3084 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-08scons: Make env['USE_PYTHON'] a source for createEnumStrings.Gabe Black
That clues scons in to the fact that the contents of the target of that function depends on the value of that construction variable. Change-Id: I803322ea1a178152da3d95dffffe20acd4271c88 Reviewed-on: https://gem5-review.googlesource.com/3083 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-06config: Remove support for CPU aliases.Gabe Black
This was added for backwards compatability, but it adds a decent amount of complexity. The table below shows what CPU class name to use in place of a given alias. +==========+========================================================+ | Alias | CPU class | +==========+========================================================+ | timing | TimingSimpleCPU | | atomic | AtomicSimpleCPU | | minor | MinorCPU | | detailed | DrivO3CPU | | kvm | ArmKvmCPU, ArmV8KvmCPU or X86KvmCPU, depending on arch | | trace | TraceCPU | +==========+========================================================+ Change-Id: I251c4f64b7869c6b64dd25b36967ae240f01ef08 Reviewed-on: https://gem5-review.googlesource.com/2940 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-05syscall_emul: Argument retrieval bug fixAlexandru Dutu
This commit fixes a stack-buffer underflow by fixing the way the array is indexed. Change-Id: I44400e2b99a2f8e1f48f673cd110b9dcd6480a72 Reviewed-on: https://gem5-review.googlesource.com/3040 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2017-05-03scons: Merge reading test SConscripts into makeEnv.Gabe Black
We're already visiting each of the environments, there's no reason to track them all and then set up test SConscripts on a second pass. Change-Id: I2d1166f58ac907e874d6ad5de7bd53ff7ad645f8 Reviewed-on: https://gem5-review.googlesource.com/2980 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-03scons: Fix the compiler flag used for partial linking.Gabe Black
It seems that g++ can generally handle the -r flag for generating a relocatable object file, but ld can't always handle the --relocatable flag. Change-Id: I15f32e469590a814131d4e992b392a7ad6c52b83 Reviewed-on: https://gem5-review.googlesource.com/3001 Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-02python: Remove SWIGAndreas Sandberg
Remove SWIG-specific Python code. Change-Id: If1d1b253d84021c9a8f9a64027ea7a94f2336dff Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2922 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2017-05-02base, sim, dev: Remove SWIGAndreas Sandberg
Remove SWIG guards and SWIG-specific C++ code. Change-Id: Icaad6720513b6f48153727ef3f70e0dba0df4bee Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2921 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2017-05-02scons: Remove SWIG supportAndreas Sandberg
Remove remaining SWIG support from the build infrastructure. Change-Id: I7549cd0f952ca3a51481918eefef3a29f03af359 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2920 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2017-05-02python: Use PyBind11 instead of SWIG for Python wrappersAndreas Sandberg
Use the PyBind11 wrapping infrastructure instead of SWIG to generate wrappers for functionality that needs to be exported to Python. This has several benefits: * PyBind11 can be redistributed with gem5, which means that we have full control of the version used. This avoid a large number of hard-to-debug SWIG issues we have seen in the past. * PyBind11 doesn't rely on a custom C++ parser, instead it relies on wrappers being explicitly declared in C++. The leads to slightly more boiler-plate code in manually created wrappers, but doesn't doesn't increase the overall code size. A big benefit is that this avoids strange compilation errors when SWIG doesn't understand modern language features. * Unlike SWIG, there is no risk that the wrapper code incorporates incorrect type casts (this has happened on numerous occasions in the past) since these will result in compile-time errors. As a part of this change, the mechanism to define exported methods has been redesigned slightly. New methods can be exported either by declaring them in the SimObject declaration and decorating them with the cxxMethod decorator or by adding an instance of PyBindMethod/PyBindProperty to the cxx_exports class variable. The decorator has the added benefit of making it possible to add a docstring and naming the method's parameters. The new wrappers have the following known issues: * Global events can't be memory managed correctly. This was the case in SWIG as well. Change-Id: I88c5a95b6cf6c32fa9e1ad31dfc08b2e8199a763 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Andrew Bardsley <andrew.bardsley@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2231 Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-05-02ext: Fix undefined macro in pybindAndreas Sandberg
Change-Id: I63a2506d3c028f78cacce8308e2f0e4880531dec Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2230 Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
2017-05-02ext: Add pybind rev f4b81b3Andreas Sandberg
Change-Id: I52e4fc9ebf2f59da57d8cf8f3e37cc79598c2f5f Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2229 Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
2017-05-01scons: Remove the SPAWN hack added earlier.Gabe Black
A previous change forced scons to spawn child processes by exec-ing it directly rather than going through the shell because the command line length would be too long for the shell to handle. Now that incremental linking should keep the command line lengths more under control, that change should no longer be necessary. Change-Id: I9e82a62083afd1414324a7fd697bd6d4b76367ae Reviewed-on: https://gem5-review.googlesource.com/2947 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-01scons: Group Source-s based on what SConscript included them.Gabe Black
The groups won't be perfectly balanced or optimally planned, but this requires no thought and breaks the object files down into a reasonable number of reasonably sized groups. Change-Id: I6542fc807aaf356a9be751093f68e2e29f0b1586 Reviewed-on: https://gem5-review.googlesource.com/2946 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-01scons: Put Source objects in groups and partially link them.Gabe Black
The groups will be linked together into intermediate partially linked object files. Right now the hierarchy is assumed to be flat, but with some effort it could be extended to allow truly hierarchical linking. Change-Id: I77b77710554e5f05e8b00720a0170afaf4afac2d Reviewed-on: https://gem5-review.googlesource.com/2945 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-01scons: Add builders for partially linked object files.Gabe Black
These intermediate object files can be used to perform a hierarchical link. Change-Id: I27634731734eebe6531ce6b0894abdd59ffdc5c9 Reviewed-on: https://gem5-review.googlesource.com/2944 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-05-01arch-sparc: Fix wrong indentation causing warnings for gcc 6Nikos Nikoleris
Change-Id: I94e15ae79f0e73692d882f62fd2b7bf45cf0c841 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2900 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-01dev: Add ATA command used in recent Linux kernelsJason Lowe-Power
Add a case for the ATA command ATAPI_IDENTIFY_DEVICE. This avoids the panic: Unsupported ATA command when booting a recent Linux kernel. This was tested on 4.8.13. Change-Id: Ib297a2c02da0730d8698c59801254dd0f5ee9f7f Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/2863 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Gabe Black <gabeblack@google.com>
2017-04-28scons: Add a Transform() for when linking shared libraries.Gabe Black
Change-Id: I7ddba0cc7be559633328011c1c7e2282f509b78c Reviewed-on: https://gem5-review.googlesource.com/2943 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-04-28scons: Find ext build directories automatically.Gabe Black
The ext directories with SConscripts in them are easy to find automatically. Avoid boilerplate listing them out and SConscript()ing them manually. Change-Id: Ib723882aebc00e639eb8ec44904bb05ffa2c6b55 Reviewed-on: https://gem5-review.googlesource.com/2942 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-04-25misc: Add MAINTAINERS fileJason Lowe-Power
This file defines all of the commit keywords used for gem5 commits and the maintainter(s) for each of these keywords. This patch introduces a number of new keywords, and changes to previous keywords. The new keywords better follow gem5's directory structure and are more extensible. Currently, most keywords do not have a maintainer. More maintainers will be added as more people volunteer to be maintainers. This patch also updates the CONTRIBUTING.md file to point to this file instead of listing the keywords separately. When this file is committed the wiki will also be updated accordingly. Change-Id: Ib0abfeb39a3ca01b74b340e24dc9a2cd95ff813f Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/2760 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-04-21tests: Remove unused options from tests.pyAndreas Sandberg
The test sub-command in tests.py incorrectly accepts various formatting options in its usage string. These options aren't needed since the test command doesn't produce any output. Change-Id: I6d4731aa32a25a2286aa66548eaa0154a9392f79 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2840 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-04-18x86: fixed branching() computation for branch uopsSanti Galan
When a branch micro-op belongs to a flow and the micro-op does not change the nPC and just updates the nuPC (like a 'rep movs' flow), branching() function always returns not-taken no matter actual micro-branch outcome. Provided fix adds to the equation nuPC attribute checking since these kind of branch micro-op only updates that pointer. This issue has been found while debugging the performance of a copy-loop implemented with memcopy function. Without the fix, 'rep movss' internal micro-branch was always predicted as not-taken causing an squash event after every branch micro-branch execution. Using the provided test, branch mispredition went from 1922 without the fix to 7. Change-Id: I1bcbefae26aef47e3135817ef99b53d0ea0a98fa
2017-04-14scons: When spawning the linker process, don't involve the shell.Gabe Black
The command line can be too long, causing bash to choke. This means we can't use any shell syntax like shell variables or redirection when linking, but that should be easy to avoid. Change-Id: Ie6c8ecab337cef6bd3c7e403346ced06f46f0993 Reviewed-on: https://gem5-review.googlesource.com/2780 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Steve Reinhardt <stever@gmail.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-04-11config, arm: Add an example power modelAndreas Sandberg
Add a script to demonstrate how power models can be wired to gem5 models. The script is meant as an example only and does not correlate with any realistic implementation. Change-Id: Ib95a74b2cb4af77a7816e3e8e89c89f3460775a1 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2721 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 13:34:07 +0000