| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.
The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.
Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.
Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.
Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
|
|
The unproxy code for Parent.any can generate a circular reference
in certain situations with classes hierarchies like those in ClockDomain.py.
This patch solves this by marking ouself as visited to make sure the
search does not resolve to a self-reference.
|
|
The ARM TLBs have a bootUncacheability flag used to make some loads
and stores become uncacheable when booting in FS mode. Later the
flag is cleared to let those loads and stores operate as normal. When
doing a takeOverFrom(), this flag's state is not preserved and is
momentarily reset until the CPSR is touched. On single core runs this
is a non-issue. On multi-core runs this can lead to crashes on the O3
CPU model from the following series of events:
1) takeOverFrom executed to switch from Atomic -> O3
2) All bootUncacheability flags are reset to true
3) Core2 tries to execute a load covered by bootUncacheability, it
is flagged as uncacheable
4) Core2's load needs to replay due to a pipeline flush
3) Core1 core does an action on CPSR
4) The handling code for CPSR then checks all other cores
to determine if bootUncacheability can be set to false
5) Asynchronously set bootUncacheability on all cores to false
6) Core2 replays load previously set as uncacheable and notices
it is now flagged as cacheable, leads to a panic.
This patch implements takeOverFrom() functionality for the ARM TLBs
to preserve flag values when switching from atomic -> detailed.
|
|
For the o3, add instruction mix (OpClass) histogram at commit (stats
also already collected at issue). For the simple CPUs we add a
histogram of executed instructions
|
|
This patch squashes prefetch requests from downstream caches,
so that they do not steal cachelines away from caches closer
to the cpu. It was originally coded by Mitch Hayenga and
modified by Aasheesh Kolli.
|
|
This source for stats binds an object and a method / function from the object
to a stats object. This allows pulling out stats from object methods without
needing to go through a global, or static shim.
Syntax is somewhat unpleasant, but the templates and method pointer type
specification were quite tricky. Interface is very clean though; and similar
to .functor
|
|
Allow the specification of a socket ID for every core that is reflected in the
MPIDR field in ARM systems. This allows studying multi-socket / cluster
systems with ARM CPUs.
|
|
Splits the CommMonitor trace_file parameter into three parameters. Previously,
the trace was only enabled if the trace_file parameter was set, and would be
written to this file. This patch adds in a trace_enable and trace_compress
parameter to the CommMonitor.
No trace is generated if trace_enable is set to False. If it is set to True, the
trace is written to a file based on the name of the SimObject in the simulation
hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be
overridden by additionally specifying a file name to the trace_file parameter
(more on this later).
The trace_compress parameter will append .gz to any filename if set to True.
This enables compression of the generated traces. If the file name already ends
in .gz, then no changes are made.
The trace_file parameter will override the name set by the trace_enable
parameter. In the case that the specified name does not end in .gz but
trace_compress is set to true, .gz is appended to the supplied file name.
|
|
Unimplemented miscregs for the generic timer were guarded by panics
in arm/isa.cc which can be tripped by the O3 model if it speculatively
executes a wrong path containing a mrs instruction with a bad miscreg
index. These registers were flagged as implemented and accessible.
This patch changes the miscreg info bit vector to flag them as
unimplemented and inaccessible. In this case, and UndefinedInst
fault will be generated if the register access is not trapped
by a hypervisor.
|
|
This patch changes the default pixel clock to effectively generate
1080p resolution at 60 frames per second. It is dependent upon the
kernel device tree file using the specified resolution / display
string in the comments.
|
|
This is a quick hack to communicate a greater number of CPUs to a guest OS via
the ARM A9 SCU config register. Some OSes (Linux) just look at the bottom field
to count CPUs and with a small change can look at bits [3:0] to learn about up
to 16 CPUs.
Very much unsupported (and contains warning messages as such) but useful for
running 8 core sims without hardwiring CPU count in the guest OS.
|
|
|
|
With (upcoming) separate compilation, they are useless. Only
link-time optimization could re-inline them, but ideally
feedback-directed optimization would choose to do so only for
profitable (i.e. common) instructions.
|
|
|
|
Very rarely does anyone ever mess with PLY code, and when
such a need arises, the developer can reenable this flag in
their working tree.
This will eliminate the "generating LALR tables" message
during compilation and temporary parser.out file as well.
|
|
SWIG commit fd666c1 (*) made it unnecessary for gem5 to have these
typemaps to handle Vector types.
* https://github.com/swig/swig/commit/fd666c1440628a847793bbe1333c27dfa2f757f0
|
|
The MicroMemOp class generates the disassembly for both integer
and floating point instructions, but it would always print its
first operand as an integer register without considering that the
op may be a floating instruction in which case a float register
should be displayed instead.
|
|
Adds a suppression rule to util/valgrind-suppressions due to a minor bug
present in zlib that has no impact on simulation.
|
|
This patch fixes the unit in the abort printout.
|
|
setTranslateLatency could sometimes improperly access a deleted request
packet after an instruction was squashed.
|
|
Rewriting the type checking around PortRef, which was interacting strangely
with other Python scripts.
Tested-by: stephan.diestelhorst@arm.com
|
|
In the O3 LSQ, data read/written is printed out in DPRINTFs. However,
the data field is treated as a character string with a null terminated.
However the data field is not encoded this way. This patch removes
that possibility by removing the data part of the print.
|
|
This never actually worked since it was printing out only a word
of the cache block and not the entire thing and doubly didn't work
csprintf overrides the %#x specifier and assumes a char* array is
actually a string.
|
|
FailUnimplemented passed a stack created mnemonic as a const char * which
causes some grief when the stack goes away.
|
|
O3CPU has a compile-time maximum width set in o3/impl.hh, but checking
the configuration against this limit was not implemented anywhere
except for fetch. Configuring a wider pipe than the limit can silently
cause various issues during the simulation. This patch adds the proper
checking in the constructor of the various pipeline stages.
|
|
Without this declaration, new clangs will complain about this value
being unused. It has no explicit use in the codebase, but it can be
useful to turn on all debugging flags while in a debugger to greatly
increase simulator verbosity.
|
|
SCons already does this for all build steps.
|
|
As suggested by Nathan Binkert in 2008:
http://permalink.gmane.org/gmane.comp.emulators.m5.users/2676
|
|
|
|
+ changes to one ruby regression config.ini file.
|
|
Has not been maintained at all. Since there is alternate documentation
available on gem5.org, no need to have this separately.
|
|
It had an unnecessary pairs token which is being removed.
|
|
A number of calls to isEmpty() and numFreeEntries()
should be thread-specific.
In cpu.cc, the fact that tid is /*commented*/ out is a bug. Say the rob
has instructions from thread 0 (isEmpty() returns false), and none from
thread 1. If we are trying to squash all of thread 1, then
readTailInst(thread 1) will be called because rob->isEmpty() returns
false. The result is end_it is not in the list and the while
statement loops indefinitely back over the cpu's instList.
In iew_impl.hh, all threads are told they have the entire remaining IQ, when
each thread actually has a certain allocation. The result is extra stalls at
the iew dispatch stage which the rename stage usually takes care of.
In commit_impl.hh, rob->readHeadInst(thread 1) can be called if the rob only
contains instructions from thread 0. This returns a dummyInst (which may work
since we are trying to squash all instructions, but hardly seems like the right
way to do it).
In rob_impl.hh this fix skips the rest of the function more frequently and is
more efficient.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Upon aggregating records, serialize system's cache-block size, as the
cache-block size can be different when restoring from a checkpoint. This way,
we can correctly read all records when restoring from a checkpoints, even if
the cache-block size is different.
Note, that it is only possible to restore from a checkpoint if the
desired cache-block size is smaller or equal to the cache-block size
when the checkpoint was taken; we can split one larger request into
multiple small ones, but it is not reliable to do the opposite.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
It is not in use and not required as such.
|
|
|
|
This patch fixes an issue with the way the python-config path is
parsed, as it caused issues on systems where a newline ended up being
included in the path.
|
|
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Compile gem5 on systems where python2 and python3 co-exists without any
changes in path. python2-config is chosen over python-config if it exists.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Simulating a SMP or multicore requires devices to be shared between
multiple KVM vCPUs. This means that locking is required when accessing
devices. This changeset adds the necessary locking to allow devices to
execute correctly. It is implemented by temporarily migrating the KVM
CPU to the VM's (and devices) event queue when handling
MMIO. Similarly, the VM migrates to the interrupt controller's event
queue when delivering an interrupt.
The support for fast-forwarding of multicore simulations added by this
changeset assumes that all devices in a system are simulated in the
same thread and each vCPU has its own thread. Special care must be
taken to ensure that devices living under the CPU in the object
hierarchy (e.g., the interrupt controller) do not inherit the parent
CPUs thread and are assigned to device thread. The KvmVM object is
assumed to live in the same thread as the other devices in the system.
|
|
The calling thread is undefined when the PollQueue services events.
This implies that PollEvents need to handle the case where they are
processed from a different thread than the thread that created the
event. This changeset adds temporary event queue migrations to the VNC
server, the ethernet tap device, and the terminal to protect them from
inter-thread calls.
|
|
As of now, the enqueue statement can take in any number of 'pairs' as
argument. But we only use the pair in which latency is the key. This
latency is allowed to be either a fixed integer or a member variable of
controller in which the expression appears. This patch drops the use of pairs
in an enqueue statement. Instead, an expression is allowed which will be
interpreted to be the latency of the enqueue. This expression can anything
allowed by slicc including a constant integer or a member variable.
|
|
The phrase is no longer valid since we do not distinguish between
inter and intra chip communication.
|
|
We need the ability to lock event queues to enable device accesses
across threads. The serviceOne() method now takes a service lock prior
to handling a new event. By locking an event queue, a different
thread/eq can effectively execute in the context of the locked event
queue. To simplify temporary event queue migrations, this changeset
introduces the EventQueue::ScopedMigration class that unlocks the
current event queue, locks a new event queue, and updates the current
event queue variable.
In order to prevent deadlocks, event queues need to be released when
waiting on barriers. This is implemented using the
EventQueue::ScopedRelease class. An instance of this class is, for
example, used in the BaseGlobalEvent class to release the event queue
when waiting on the synchronization barrier.
The intended use for this functionality is when devices need to be
accessed across thread boundaries. For example, when fast-forwarding,
it might be useful to run devices and CPUs in separate threads. In
such a case, the CPU locks the device queue whenever it needs to
perform IO. This functionality is primarily intended for KVM.
Note: Migrating between event queues can lead to non-deterministic
timing. Use with extreme care!
--HG--
extra : rebase_source : 23e3a741a1fd73861d1339782dbbe1bc76285315
|
|
this patch adds the source for mcpat, a power, area, and timing modeling
framework.
|
|
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so
2) addes jni_gem5Op.h to clean since it is added during make
3) links the m5 utility statically since it won't work on some images otherwise
|
|
A recent changeset altered the default memory class to DRAMCtrl. In se mode,
ruby uses the physical memory to check if a given address is within the bounds
of the physical memory. SimpleMemory is enough for this. Moreover,
SimpleMemory does not check whether it is connected or not, something which
DRAMCtrl does.
|
|
This patch fixes violation of TSO in the O3CPU, as all loads must be
ordered with all other loads. In the LQ, if a snoop is observed, all
subsequent loads need to be squashed if the system is TSO.
Prior to this patch, the following case could be violated:
P0 | P1 ;
MOV [x],mail=/usr/spool/mail/nilay | MOV EAX,[y] ;
MOV [y],mail=/usr/spool/mail/nilay | MOV EBX,[x] ;
exists (1:EAX=1 /\ 1:EBX=0) [is a violation]
The problem was found using litmus [http://diy.inria.fr].
Committed by: Nilay Vaish <nilay@cs.wisc.edu
|
|
This patch updates the stats to reflect the changes to the DRAM
controller.
|
