Age | Commit message (Collapse) | Author |
|
We set the satisfied flag when a cache clean request encounters:
1) a block with the dirty bit set, or
2) a pending modified MSHR which means that the cache will get copy of
the block that will be soon modified.
This changeset fixes a previous bug that set the satisfied flag on
snooping MSHR hits even the pendingModified flags was not set.
Change-Id: I4968c4820997be5cc1238148eea12a1ba39837d4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7822
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
A writeclean packet writes a dirty block to the memory below and
therefore sets the dirty flag for the block when the memory below is a
cache. If the block was also marked as writable it can satisfy future
write requests without further requests/snoops. This can lead to
multiple copies of the same block marked as dirty which is not
allowed. This changeset clears the writable flag from the cleaned
block to prevent the cache from satisfying future write requests
without sending a downstream request.
Change-Id: I14d3c62fd33f81b1a8ba62374c8565ccab00a6fe
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7821
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This commit changes the function's name used for retrieving the index of a
security banked register given the flatten index. This will avoid confusion
with flattenRegId, which has a different purpose.
Change-Id: I470ffb55916cb7fc9f78e071a7f2e609c1829f1a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7982
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch fixes AArch32 SETEND instruction, which was previously
executed unconditionally without checking (H)SCTLR.SED field. This bit
enables/disables the trapping of the instruction.
Change-Id: Ib3d2194c8d16c34ec2a9ab3e8090081900c1e42e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7981
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Fixed Illegal Exception Return detection, which was not
covering all the documented cases.
Change-Id: If08ddc1490d1c0a1fccee1489d116384770ce0a5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7223
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements the ELUsingAArch32K pseudocode, which is returning
true if the provided Exception Level is using A32 ISA, but it is not
panicking (quitting simulation) if the information is unknown (see
documentation).
The panicking is the current behaviour of the ELIs32 utility in gem5.
Change-Id: Iad7b56077d7e0f8ee223b5b9593cb8097f26bb29
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7222
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch introduces the inSecureBelow pseudocode function
defined in the armarm documentation. It also replaces the
inSecureState function call which was improperly used in
ELIs32: we might be in secure state (EL3), but with non-secure
lower ELs (SCR.NS = 1).
Change-Id: I01febcb54392ad4e51e785b4d5153aeb3437c778
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7221
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The state of EL1 wasn't determined correctly when running in secure
mode if virtualisation was enabled. This changset updates the
implementation to match the canonical behavior from the ARM ARM.
Change-Id: I7ed6f5c003617773603f678667aac069d73b6f62
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7141
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
numSets is unsigned, so it cannot be lower than 0. Besides, isPowerOf2(0)
is false by definition (and implemmentation*), so there is no need for the
double check.
* As presented in base/intmath.hh
Change-Id: I3f6296694a937434feddc7ed21f11c2a6fdfc5a9
Reviewed-on: https://gem5-review.googlesource.com/7901
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Standardize all header guards in the mem directory according to the most
frequent patterns. In general they have the form:
mem: __FOLDER_TREE_FILE_NAME_HH__
ruby: __FOLDER_TREE_FILENAME_HH__
Change-Id: I983853e292deb302becf151bf0e970057dc24774
Reviewed-on: https://gem5-review.googlesource.com/7881
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
<iostream> isn't actually used anywhere in bitunion.hh. The templated
hash struct type is defined in <functional> and should be included
explicitly.
Change-Id: I8691ccb2f9e28a01610ae8bb4d9591b07cb7320b
Reviewed-on: https://gem5-review.googlesource.com/7781
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
We have not added the --generate-dtb option for non-ARM systems and
hence this case becomes dead code. It also leads to error on non-ARM
systems as is tries to access a non existent field.
Change-Id: Ia926bd0c61efa275bc5e3864b8a9c3ffb7aa3cb5
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/7801
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
MinorCPU was not handling IsSquashAfter flagged instructions. The
behaviour was to force a branch (hence enforcing refetching) for
SerializeAfter instructions only. This has now been extended to
SquashAfter in order to correctly support ISB barrier instruction
behaviour.
Change-Id: Ie525b23350b0de121372d3b98b433e36b097d5c4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5702
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ISB Serializing behaviour is guaranteed by IsSquashAfter,
which is inherently serializing; when instruction is commited,
consecutive instructions are flushed and refetched.
Change-Id: I05e61b4cf9f01113d95b1502c996d04cbd69b759
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5701
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
After refactoring the remote gdb interface, break_type is declared as
const function and is only used as a parameter to DPRINTF function
calls. This means that it is seen as unused when compiling
gem5.fast. This changeset fixes the warning.
Change-Id: Iea89b66c53c62341c043d8bd3838ebc27ee333bc
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7741
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
gem5 won't compile correctly since g++ will throw a warning (error)
that the next case statement below this one is reachable since there is
no 'break' statement.
Signed-off-by: Sujay Phadke
Change-Id: Icab646ee5abcfeb6ba3e690909042927b4003eba
Reviewed-on: https://gem5-review.googlesource.com/7521
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change backtrace implementation testing code not to have NULL pointer.
SCons fails to find backtrace implementation even if it exists.
The implementation testing code contains NULL pointers as a backtrace
buffer argument. Some compilers check the buffer is NULL pointed
or not, and generate a compilation error.
Change-Id: Icc5bc9a887b7a6bbc804b5b8a5a35a935c78a922
Reviewed-on: https://gem5-review.googlesource.com/7681
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: I9f208819b8c1a5c46a77262eb533bb47adb2b905
Reviewed-on: https://gem5-review.googlesource.com/7701
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
If set, the granularity bit indicates that the segment limit of segment
descriptors shall be interpreted as number of 4K blocks rather than
bytes.
The high part (bit 48 to 51) of segment descriptor limits is only 4 bits
wide while the low part (bit 0 to 15) spans 16 bits.
Change-Id: Ie386224ca815275fdb31498fe68310ed9c62cc87
Reviewed-on: https://gem5-review.googlesource.com/7601
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This makes riscv compile with the version of clang(++) I have on my
workstation.
Change-Id: I0478616810fbc8a715fd61323b7e0f73676c8328
Reviewed-on: https://gem5-review.googlesource.com/7643
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The cprintf functions don't know ahead of time what format characters
are going to be used with what underlying data types, and so any
type must be minimally usable with the default specialization of
format_integer, format_char, format_float and format_string. All of
those functions ultimately print their parameter with out << data
except the one which prints stringstreams. That function accesses the
buffer of the string stream with .str(), and then prints that instead.
That should technically work out ok as long as stringstreams are only
printed using %s, but there's no way to guarantee that ahead of time.
To avoid that problem, and because gem5 doesn't ever actually use the
ability to print stringstreams directly, this change removes that
feature and modifies the corresponding part of the unit test.
If we ever do want to print the contents of a string stream, it won't
be difficult to add a .str() to it.
Change-Id: Id902eaff042b96b374efe0183e5e3be9626e8c88
Reviewed-on: https://gem5-review.googlesource.com/7642
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
If they're needed, they'd be fairly easy to recreate and are also
available in the revision history.
Change-Id: I5cf5e4b1271ce488016464048de69bc643dee4d9
Reviewed-on: https://gem5-review.googlesource.com/7641
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Move massive initialization routine to the bottom of miscregs.cc.
Additionally, share register metadata across ISA instances by
making lookUpMiscReg a static member of the ISA and only
initializing it once.
Change-Id: I6d6ab26200c4e781151cc6efd97ce2420e2bf4cc
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6803
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implement proper handling of RES0/RES1 and RAZ/RAO bitfields.
Change-Id: I344c32c3fb1d142acfb0521ba3590ddd2b1f5360
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6802
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The mappings for sharing a backing store between AArch32
and AArch64 system registers are made clearer using an
initializer object.
Change-Id: I29dcfab2797b4d36b3182342997edffde334a291
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6801
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Iaa5eeb3504b3ff9e46b6f592a06d6b833c830d83
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5969
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Equips the fs.py config routine with an extra commandline option
--generate-dtb that will generate a dtb file automatically before
running the simulation. Only works with ARM systems and gives a warning
if the simulated system is not of --machine-type VExpress_GEM5_V1.
Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5968
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Enables automatic generation of Device Trees for RealView PCI host
controllers. Note that some parts are more hard coded than you'd want,
but this is due to the limited understanding the PCI host has of its
configuration (i.e. it doesn't know all memory ranges). Fixing this,
for now at least, went beyond the scope and intentions of the
Device Tree generating code: use with care!
Change-Id: I2041871e0eb4d04fb5191257c47dd38649d1c0cc
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5967
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Adds Device Tree methods for the energy controller to allow for
DVFS simulations with automatically generated DTB files
Change-Id: Id8682f07dff1bbe63987e757faa0694e03ee86ab
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5966
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implements the Device Tree generating code for devices required by the
RealView VExpress_GEM5_V1 platform
Change-Id: I14244b2f3c028cbddba3c23ce7433fe3b301a0e8
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5965
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implements a high level method for generating a Device Tree node for
an AbstractMemory object.
Change-Id: I544ec642f182f103df26de535fdfaf03b3787a08
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5964
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Equips cpu models with a method to generate the cpu node.
Note: even though official documentation requires that CPU ids start
counting from 0 in every cluster, GEM5 requires a globally unique cpu_id.
Change-Id: Ida3e17af3124a68ef7dbf2449cd034dfc3ec39df
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5963
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds an extra layer to the pyfdt library such that usage
gets easier and device tree nodes can be specified in less code,
without limiting original usage. Note to not import both the pyfdt
and fdthelper in the same namespace (but generally fdthelper is all
you need, because it supplies the same classes even when they are not
extended in any way)
Also, this patch lays out the primary functionality for generating a
device tree, where every SimObject gets an empty generateDeviceTree
method and ArmSystems loop over their children in an effort to merge
all the nodes. Devices are implemented in other patches.
Change-Id: I4d0a0666827287fe42e18447f19acab4dc80cc49
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5962
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds pyfdt.py to the m5.ext module. This is used in
succeeding patches for generating and editing dtb files and flat
device trees for DT autogeneration.
The file is in the m5_root/src/python/m5/ext directory, as opposed to
the m5_root/ext, because this library is part of the m5 object space
and linking to the m5_root/ext directory from the SConscript file
in src/python can not be done reliably. Linking from the root level
SConscript is also not an option, because it doesn't have the PySource
method defined.
Cloned from: https://github.com/superna9999/pyfdt
Commit: accbcd254584c9295a18878d32999d0c7c156f8e
Version: 0.3
Change-Id: I928bdc912a9507d1f8a3290acf445c7cae496552
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5961
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Within a device tree, the GenericTimer device needs to point (via phandle)
to a clock domain which is itself also an object in the device tree. Within
gem5, clock domains are managed by making all clocked SimObjects inherit
from ClockedObject rather than SimObject.
Without this change, the GenericTimer is unable to generate the appropriate
clock domain phandle, and will crash during DTB autogeneration.
Change-Id: I6d3fb6362847c6a01720b2f14b3d595d1e59f01f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4960
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
clang reports an error otherwise and fails to compile.
Change-Id: I3603d6c710641f1289e35c67f89a49f5cb71e95e
Reviewed-on: https://gem5-review.googlesource.com/7582
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
clang was getting very upset and interpretting a member function
pointer as a call to the actual underlying function, and then
complaining that it was a non-static function call without an instance.
It seems what it was really upset about was that the class who's scope
the member function pointer belonged to (the current class) wasn't done
being defined. This *should* be ok as far as I can tell, but clang was
having none of it.
This change reworks how the type of the setter function arguments are
determined to work around that limitation. The bitunion test was run
with clang++ and g++ and both pass, and I've built gem5.opt for ARM
successfully.
Change-Id: Ib9351784a897af4867fe08045577e0247334ea11
Reviewed-on: https://gem5-review.googlesource.com/7581
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This module allows m5ops to be executed in Lua programs.
To compile it (in util/m5):
The following command generates Lua moduel, gem5OpLua.so.
make -f Makefile.<arch> gem5OpLua.so
To use it:
First, put gem5OpLua.so in Lua library search path.
Then, import the module and execute the m5op function.
Example usage, creating a checkpoint.
m5 = require("gem5OpLua")
m5.do_checkpoint(0, 0)
Change-Id: Icc18a1fb6c050afeb1cf4558fbdc724fb26a90e2
Reviewed-on: https://gem5-review.googlesource.com/6541
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds support for cache flushing instructions in x86.
It piggybacks on support for similar instructions in arm ISA
added by Nikos Nikoleris. I have tested each instruction using
microbenchmarks.
Change-Id: I72b6b8dc30c236a21eff7958fa231f0663532d7d
Reviewed-on: https://gem5-review.googlesource.com/7401
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This header is no longer used.
Change-Id: I8da7f8618d647dd11c581818c13855c4e20d32d2
Reviewed-on: https://gem5-review.googlesource.com/7351
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Rather than store the actual TLB entry that corresponds to a mapping,
we can just store some abstracted information (address, a few flags)
and then let the caller turn that into the appropriate entry. There
could potentially be some small amount of overhead from creating
entries vs. storing them and just installing them, but it's likely
pretty minimal since that only happens on a TLB miss (ideally rare),
and, if it is problematic, there could be some preallocated TLB
entries which are just minimally filled in as necessary.
This has the nice effect of finally making the page tables ISA
agnostic.
Change-Id: I11e630f60682f0a0029b0683eb8ff0135fbd4317
Reviewed-on: https://gem5-review.googlesource.com/7350
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The new version extracts all the x86 specific aspects of the class,
and builds the interface around a variable collection of template
arguments which are classes that represent the different levels of the
page table. The multilevel page table class is now much more ISA
independent.
Change-Id: Id42e168a78d0e70f80ab2438480cb6e00a3aa636
Reviewed-on: https://gem5-review.googlesource.com/7347
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Using m5ops for X86 in shared objects requires PIC for the m5ops.
Typically, the PIC version is used to make m5op interfaces to other
languages like python and lua.
Change-Id: I2463904c13ea8b839d0386d3c743d8dad1e1e6bc
Reviewed-on: https://gem5-review.googlesource.com/7261
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Use the system object to allocate physical memory instead of manually
placing certain structures and then forcing the system to start other
allocations after them in physical memory.
Change-Id: Ie18c81645c3b648c64a6d7a649a0e50f7028f344
Reviewed-on: https://gem5-review.googlesource.com/7346
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
Pass this constant into the page table constructor.
Change-Id: Icbf730f18d9dfcfebd10a196f7f799514728b0fb
Reviewed-on: https://gem5-review.googlesource.com/7345
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
Don't get it from a global constant declared in an ISA header file.
Change-Id: Ie19440abdd76500a5e12e6791e6f755ad9e95af3
Reviewed-on: https://gem5-review.googlesource.com/7344
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This avoids having a copy in the lookup function itself, and the
declaration of a lot of temporary TLB entry pointers in callers. The
gpu TLB seems to have had the most dependence on the original signature
of the lookup function, partially because it was relying on a somewhat
unsafe copy to a TLB entry using a base class pointer type.
Change-Id: I8b1cf494468163deee000002d243541657faf57f
Reviewed-on: https://gem5-review.googlesource.com/7343
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Since this type is now accessible through a clean interface, hide it
from anybody that tries to peak around the curtain.
Change-Id: I1257b6675a45b8648be459ad8e8d0f27a6feee6b
Reviewed-on: https://gem5-review.googlesource.com/7205
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The ARM types.hh file defined an STL style hash structure to operate
on the ExtMachInst, but it referred to the underlying storage type
using internal typedefs in the BitUnion types. To avoid having to do
that, this change adds a hash structure to bitunion.hh which will work
on any BitUnion, and gets rid of the ARM ExtMachInst version.
Change-Id: I7c1c84d61b59061fec98abaaeab6becd06537dee
Reviewed-on: https://gem5-review.googlesource.com/7204
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
serialize.hh should not reference internal implementation details in
the underlying BitUnion types.
Change-Id: I1ce29243db63801b7788f037fdc54811bdab889c
Reviewed-on: https://gem5-review.googlesource.com/7203
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|