summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-09cpu, arm: Allow the specification of a socket fieldAkash Bagdia
Allow the specification of a socket ID for every core that is reflected in the MPIDR field in ARM systems. This allows studying multi-socket / cluster systems with ARM CPUs.
2014-05-09mem: Auto-generate CommMonitor trace file namesSascha Bischoff
Splits the CommMonitor trace_file parameter into three parameters. Previously, the trace was only enabled if the trace_file parameter was set, and would be written to this file. This patch adds in a trace_enable and trace_compress parameter to the CommMonitor. No trace is generated if trace_enable is set to False. If it is set to True, the trace is written to a file based on the name of the SimObject in the simulation hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be overridden by additionally specifying a file name to the trace_file parameter (more on this later). The trace_compress parameter will append .gz to any filename if set to True. This enables compression of the generated traces. If the file name already ends in .gz, then no changes are made. The trace_file parameter will override the name set by the trace_enable parameter. In the case that the specified name does not end in .gz but trace_compress is set to true, .gz is appended to the supplied file name.
2014-05-09arm: Panics in miscreg read functions can be tripped by O3 modelGeoffrey Blake
Unimplemented miscregs for the generic timer were guarded by panics in arm/isa.cc which can be tripped by the O3 model if it speculatively executes a wrong path containing a mrs instruction with a bad miscreg index. These registers were flagged as implemented and accessible. This patch changes the miscreg info bit vector to flag them as unimplemented and inaccessible. In this case, and UndefinedInst fault will be generated if the register access is not trapped by a hypervisor.
2014-05-09dev: Set HDLCD default pixel clock for 1080p @ 60HzChris Emmons
This patch changes the default pixel clock to effectively generate 1080p resolution at 60 frames per second. It is dependent upon the kernel device tree file using the specified resolution / display string in the comments.
2014-05-09arm: quick hack to allow a greater number of CPUs to a guest OSMatt Evans
This is a quick hack to communicate a greater number of CPUs to a guest OS via the ARM A9 SCU config register. Some OSes (Linux) just look at the bottom field to count CPUs and with a small change can look at bits [3:0] to learn about up to 16 CPUs. Very much unsupported (and contains warning messages as such) but useful for running 8 core sims without hardwiring CPU count in the guest OS.
2014-05-09arm: Add Makefile for aarch64 build of util/m5Eric Van Hensbergen
2014-05-09arch: remove inline specifiers on all inst constrs, all ISAsCurtis Dunham
With (upcoming) separate compilation, they are useless. Only link-time optimization could re-inline them, but ideally feedback-directed optimization would choose to do so only for profitable (i.e. common) instructions.
2014-05-09arm: cleanup ARM ISA definitionCurtis Dunham
2014-03-19ext: disable PLY debuggingCurtis Dunham
Very rarely does anyone ever mess with PLY code, and when such a need arises, the developer can reenable this flag in their working tree. This will eliminate the "generating LALR tables" message during compilation and temporary parser.out file as well.
2014-05-09scons: Require SWIG >= 2.0.4 and remove vector typemapsCurtis Dunham
SWIG commit fd666c1 (*) made it unnecessary for gem5 to have these typemaps to handle Vector types. * https://github.com/swig/swig/commit/fd666c1440628a847793bbe1333c27dfa2f757f0
2014-04-23arm: Correctly display disassembly of vldmia/vstmiaCurtis Dunham
The MicroMemOp class generates the disassembly for both integer and floating point instructions, but it would always print its first operand as an integer register without considering that the op may be a floating instruction in which case a float register should be displayed instead.
2014-04-23util: Valgrind suppression additionMitch Hayenga
Adds a suppression rule to util/valgrind-suppressions due to a minor bug present in zlib that has no impact on simulation.
2014-04-23sim: Use correct unit for abort messageAndreas Hansson
This patch fixes the unit in the abort printout.
2014-04-23cpu: Fix setTranslateLatency() bug for squashed instructionsMitchell Hayenga
setTranslateLatency could sometimes improperly access a deleted request packet after an instruction was squashed.
2014-04-23misc: Proper type check and import for PortRefSascha Bischoff
Rewriting the type checking around PortRef, which was interacting strangely with other Python scripts. Tested-by: stephan.diestelhorst@arm.com
2014-04-01cpu: Fix case where o3 lsq could print out uninitialized dataMitch Hayenga
In the O3 LSQ, data read/written is printed out in DPRINTFs. However, the data field is treated as a character string with a null terminated. However the data field is not encoded this way. This patch removes that possibility by removing the data part of the print.
2014-04-01mem: Don't print out the data of a cache blockMitch Hayenga
This never actually worked since it was printing out only a word of the cache block and not the entire thing and doubly didn't work csprintf overrides the %#x specifier and assumes a char* array is actually a string.
2014-04-23arm: Don't use a stack allocated mnemonicMitchell Hayenga
FailUnimplemented passed a stack created mnemonic as a const char * which causes some grief when the stack goes away.
2014-04-23cpu: Add O3 CPU width checksDam Sunwoo
O3CPU has a compile-time maximum width set in o3/impl.hh, but checking the configuration against this limit was not implemented anywhere except for fetch. Configuring a wider pipe than the limit can silently cause various issues during the simulation. This patch adds the proper checking in the constructor of the various pipeline stages.
2014-04-23base: explicitly suggest potential use of 'All' debug flagsCurtis Dunham
Without this declaration, new clangs will complain about this value being unused. It has no explicit use in the codebase, but it can be useful to turn on all debugging flags while in a debugger to greatly increase simulator verbosity.
2014-04-23arch: remove 'null update' check in isa-parserCurtis Dunham
SCons already does this for all build steps.
2014-02-10stats: better error message for uninitialized statisticCurtis Dunham
As suggested by Nathan Binkert in 2008: http://permalink.gmane.org/gmane.comp.emulators.m5.users/2676
2014-04-22stats: updates for pc-switcheroo-full due to o3 smt fixAndreas Hansson
2014-04-19stats: updates due to o3 smt fixNilay Vaish
+ changes to one ruby regression config.ini file.
2014-04-19ruby: slicc: remove old documentationNilay Vaish
Has not been maintained at all. Since there is alternate documentation available on gem5.org, no need to have this separately.
2014-04-19ruby: slicc: slight change to rule for transitionsNilay Vaish
It had an unnecessary pairs token which is being removed.
2014-04-19o3: Fix occupancy checks for SMTFaissal Sleiman
A number of calls to isEmpty() and numFreeEntries() should be thread-specific. In cpu.cc, the fact that tid is /*commented*/ out is a bug. Say the rob has instructions from thread 0 (isEmpty() returns false), and none from thread 1. If we are trying to squash all of thread 1, then readTailInst(thread 1) will be called because rob->isEmpty() returns false. The result is end_it is not in the list and the while statement loops indefinitely back over the cpu's instList. In iew_impl.hh, all threads are told they have the entire remaining IQ, when each thread actually has a certain allocation. The result is extra stalls at the iew dispatch stage which the rename stage usually takes care of. In commit_impl.hh, rob->readHeadInst(thread 1) can be called if the rob only contains instructions from thread 0. This returns a dummyInst (which may work since we are trying to squash all instructions, but hardly seems like the right way to do it). In rob_impl.hh this fix skips the rest of the function more frequently and is more efficient. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-19ruby: recorder: Fix (de-)serializing with different cache block-sizesMarco Elver
Upon aggregating records, serialize system's cache-block size, as the cache-block size can be different when restoring from a checkpoint. This way, we can correctly read all records when restoring from a checkpoints, even if the cache-block size is different. Note, that it is only possible to restore from a checkpoint if the desired cache-block size is smaller or equal to the cache-block size when the checkpoint was taken; we can split one larger request into multiple small ones, but it is not reliable to do the opposite. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-19config: ruby: remove memory controller from network testNilay Vaish
It is not in use and not required as such.
2014-04-14arm: set default kernels for VExpress_EMM and VExpress_EMM64Anthony Gutierrez
2014-04-13scons: Fix python-config parsing by adding strip()Andreas Hansson
This patch fixes an issue with the way the python-config path is parsed, as it caused issues on systems where a newline ended up being included in the path.
2014-04-10config: add num-work-ids command line optionGedare Bloom
Adds the parameter --num-work-ids to Options.py and reads the parameter into the System params in Simulation.py. This parameter enables setting the number of possible work items to different than 16. Support for this parameter already exists in src/sim/System.py, so this changeset only affects the Python config files. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-10scons: compile on systems where python2 and python3 co-existStian Hvatum
Compile gem5 on systems where python2 and python3 co-exists without any changes in path. python2-config is chosen over python-config if it exists. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-09kvm, x86: Add initial support for multicore simulationAndreas Sandberg
Simulating a SMP or multicore requires devices to be shared between multiple KVM vCPUs. This means that locking is required when accessing devices. This changeset adds the necessary locking to allow devices to execute correctly. It is implemented by temporarily migrating the KVM CPU to the VM's (and devices) event queue when handling MMIO. Similarly, the VM migrates to the interrupt controller's event queue when delivering an interrupt. The support for fast-forwarding of multicore simulations added by this changeset assumes that all devices in a system are simulated in the same thread and each vCPU has its own thread. Special care must be taken to ensure that devices living under the CPU in the object hierarchy (e.g., the interrupt controller) do not inherit the parent CPUs thread and are assigned to device thread. The KvmVM object is assumed to live in the same thread as the other devices in the system.
2014-04-09dev: Protect PollEvent processing when running in parallel modeAndreas Sandberg
The calling thread is undefined when the PollQueue services events. This implies that PollEvents need to handle the case where they are processed from a different thread than the thread that created the event. This changeset adds temporary event queue migrations to the VNC server, the ethernet tap device, and the terminal to protect them from inter-thread calls.
2014-04-08ruby: slicc: change enqueue statementNilay Vaish
As of now, the enqueue statement can take in any number of 'pairs' as argument. But we only use the pair in which latency is the key. This latency is allowed to be either a fixed integer or a member variable of controller in which the expression appears. This patch drops the use of pairs in an enqueue statement. Instead, an expression is allowed which will be interpreted to be the latency of the enqueue. This expression can anything allowed by slicc including a constant integer or a member variable.
2014-04-08ruby: coherence protocols: drop the phrase IntraChipNilay Vaish
The phrase is no longer valid since we do not distinguish between inter and intra chip communication.
2014-04-03sim: Add the ability to lock and migrate between event queuesAndreas Sandberg
We need the ability to lock event queues to enable device accesses across threads. The serviceOne() method now takes a service lock prior to handling a new event. By locking an event queue, a different thread/eq can effectively execute in the context of the locked event queue. To simplify temporary event queue migrations, this changeset introduces the EventQueue::ScopedMigration class that unlocks the current event queue, locks a new event queue, and updates the current event queue variable. In order to prevent deadlocks, event queues need to be released when waiting on barriers. This is implemented using the EventQueue::ScopedRelease class. An instance of this class is, for example, used in the BaseGlobalEvent class to release the event queue when waiting on the synchronization barrier. The intended use for this functionality is when devices need to be accessed across thread boundaries. For example, when fast-forwarding, it might be useful to run devices and CPUs in separate threads. In such a case, the CPU locks the device queue whenever it needs to perform IO. This functionality is primarily intended for KVM. Note: Migrating between event queues can lead to non-deterministic timing. Use with extreme care! --HG-- extra : rebase_source : 23e3a741a1fd73861d1339782dbbe1bc76285315
2014-04-01ext: add McPAT sourceAnthony Gutierrez
this patch adds the source for mcpat, a power, area, and timing modeling framework.
2014-04-01arm: fix typos in makefile for ARM m5 util and link staticallyAnthony Gutierrez
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so 2) addes jni_gem5Op.h to clean since it is added during make 3) links the m5 utility statically since it won't work on some images otherwise
2014-04-01configs: use SimpleMemory when using ruby in se modeNilay Vaish
A recent changeset altered the default memory class to DRAMCtrl. In se mode, ruby uses the physical memory to check if a given address is within the bounds of the physical memory. SimpleMemory is enough for this. Moreover, SimpleMemory does not check whether it is connected or not, something which DRAMCtrl does.
2014-03-25cpu: o3: lsq: Fix TSO implementationMarco Elver
This patch fixes violation of TSO in the O3CPU, as all loads must be ordered with all other loads. In the LQ, if a snoop is observed, all subsequent loads need to be squashed if the system is TSO. Prior to this patch, the following case could be violated: P0 | P1 ; MOV [x],mail=/usr/spool/mail/nilay | MOV EAX,[y] ; MOV [y],mail=/usr/spool/mail/nilay | MOV EBX,[x] ; exists (1:EAX=1 /\ 1:EBX=0) [is a violation] The problem was found using litmus [http://diy.inria.fr]. Committed by: Nilay Vaish <nilay@cs.wisc.edu
2014-03-23stats: Update stats for DRAM changesAndreas Hansson
This patch updates the stats to reflect the changes to the DRAM controller.
2014-03-23mem: Track DRAM read/write switching and add hysteresisAndreas Hansson
This patch adds stats for tracking the number of reads/writes per bus turn around, and also adds hysteresis to the write-to-read switching to ensure that the queue does not oscilate around the low threshold.
2014-03-23mem: Rename SimpleDRAM to a more suitable DRAMCtrlAndreas Hansson
This patch renames the not-so-simple SimpleDRAM to a more suitable DRAMCtrl. The name change is intended to ensure that we do not send the wrong message (although the "simple" in SimpleDRAM was originally intended as in cleverly simple, or elegant). As the DRAM controller modelling work is being presented at ISPASS'14 our hope is that a broader audience will use the model in the future. --HG-- rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
2014-03-23mem: Change memory defaults to be more representativeAndreas Hansson
Make the default memory type DDR3-1600 x64, and use the open-adaptive page policy. This change is aiming to ensure that users by default are using a realistic memory system.
2014-03-23mem: Add close adaptive paging policy to DRAM controller modelWendy Elsasser
This patch adds a second adaptive page policy to the DRAM controller, closing the page unless there are already queued accesses to the open page.
2014-03-23mem: DRAM controller tidying upAndreas Hansson
Minor tidying up and removing of redundant code, including the printing of queue state every million accesses.
2014-03-23mem: Fix bug in DRAM bytes per activateAndreas Hansson
This patch ensures that we do not sample the bytes per activate when the row has already been closed.
2014-03-23mem: Limit the accesses to a page before forcing a prechargeAndreas Hansson
This patch adds a basic starvation-prevention mechanism where a DRAM page is forced to close after a certain number of accesses. The limit is combined with the open and open-adaptive page policy and if reached causes an auto-precharge.