| Age | Commit message (Collapse) | Author |
|---|
|
The patch removes the ruby_fs.py file. The functionality is being moved to
fs.py. This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option). The alpha fs config functions
are being combined for classing and ruby memory systems. This required
renaming the piobus in ruby to iobus. So, we will have stats being renamed
in the stats file for ruby fs regression.
|
|
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages). This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
|
|
This patch removes the piobus from the protocol config files. The ports
are now connected to the piobus in the Ruby.py file.
|
|
|
|
KVM used to use two signals, one for instruction count exits and one
for timer exits. There is really no need to distinguish between the
two since they only trigger exits from KVM. This changeset unifies and
renames the signals and adds a method, kick(), that can be used to
raise the control signal in the vCPU thread. It also removes the early
timer warning since we do not normally see if the signal was
delivered.
--HG--
extra : rebase_source : cd0e45ca90894c3d6f6aa115b9b06a1d8f0fda4d
|
|
gem5 seems to store the PC as RIP+CS_BASE. This is not what KVM
expects, so we need to subtract CS_BASE prior to transferring the PC
into KVM. This changeset adds the necessary PC manipulation and
refactors thread context updates slightly to avoid reading registers
multiple times from KVM.
--HG--
extra : rebase_source : 3f0569dca06a1fcd8694925f75c8918d954ada44
|
|
This changeset adds support for INIT and STARTUP IPI handling. We
currently handle both of these interrupts in gem5 and transfer the
state to KVM. Since we do not have a BIOS loaded, we pretend that the
INIT interrupt suspends the CPU after reset.
--HG--
extra : rebase_source : 7f3b25f3801d68f668b6cd91eaf50d6f48ee2a6a
|
|
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This patch merely tidies up the CPU and ThreadContext getters by
making them const where appropriate.
|
|
The table walker code currently accounts for two types of walks,
Atomic and Timing, and treats them differently. Atomic walks keep a
single instance of WalkerState around for all walks to use in
currState. Timing mode keeps a queue of in-flight WalkerStates and
maintains currState as NULL between walks.
If a functional walk is done during Timing mode, it is treated as an
atomic walk and either creates a persistent WalkerState if in between
Timing walks, or stomps an existing currState for an in-progress
Timing walk.
This patch distinguishes functional walks as being able to exist at
any time and sets up a temporary WalkerState for its exclusive use and
then cleans up when finished, leaving any in progress Atomic or Timing
walks undisturbed.
|
|
This patch fixes an assert condition that is not true at all
times. There are valid situations that arise in dual-core
dual-workload runs where the assert condition is false. The function
call following the assert however needs to be called only when the
condition is true (a block cannot be invalidated in the tags structure
if has not been allocated in the structure, and the tempBlock is never
allocated). Hence the 'assert' has been replaced with an 'if'.
|
|
This patch changes the decode script to output the optional fields of
the proto message Packet, namely id and flags. The flags field is set
by the communication monitor.
The id field is useful for CPU trace experiments, e.g. linking the
fetch side to decode side. It had to be renamed because it clashes
with a built in python function id() for getting the "identity" of an
object.
This patch also takes a few common function definitions out from the
multiple scripts and adds them to a protolib python module.
|
|
The version string may have additional trailing information
|
|
This snippet can be used to replace if + {panics, fatals, asserts} constructs.
The idea is to have both the condition checking and a verbose printout in a single statement. The interface is as follows:
panic_if(foo != bar, "These should be equal: foo %i bar %i", foo, bar);
fatal_if(foo != bar, "These should be equal: foo %i bar %i", foo, bar);
chatty_assert(foo == bar, "These should be equal: foo %i bar %i", foo, bar);
|
|
Small fixes to appease recent clang versions.
|
|
Small fix for a warning that prevents compilation with gcc 4.8.1 due
to detecting that a variable might be uninitialised. The fix is to
assign a safe default.
|
|
For systems without caches, the LLSC code does not get snoops for
wake-ups. We add the LLSC code in the abstract memory to do the job
for us.
|
|
The global synchronization event used to be scheduled at
simQuantum. This prevented repeated entries into gem5 from Python as
it can be scheduled in the past. This changeset ensures that the first
global synchronization happens at curTick() + simQuantum instead.
|
|
The TSL/LDT & TR/TSS segments didn't contain valid attributes. This
caused problems when transfering the state into KVM where invalid
state is a no-go. Fixup the attributes with values from AMD's
architecture programmer's manual.
|
|
When transferring segment registers into kvm, we need to find the
value of the unusable bit. We used to assume that this could be
inferred from the selector since segments are generally unusable if
their selector is 0. This assumption breaks in some weird corner
cases. Instead, we just assume that segments are always usable. This
is what qemu does so it should work.
|
|
Signal handlers in KVM are controlled per thread and should be
initialized from the thread that is going to execute the CPU. This
changeset moves the initialization call from startup() to
startupThread().
|
|
The last pop operation is now tracked as a Tick instead of in Cycles.
This helps in avoiding use of the receiver's clock during the enqueue
operation.
|
|
|
|
A copyRegs() function is added to MIPS utilities
to copy architectural state from the old CPU to
the new CPU during fast-forwarding. This
addition alone enables fast-forwarding for the
o3 cpu model running MIPS.
The patch also adds takeOverFrom() and
drainResume() functions to the InOrderCPU to
enable it to take over from another CPU. This
change enables fast-forwarding for the inorder
cpu model running MIPS, but not for Alpha.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Couple of users observed segmentation fault when the simulator tries to
register the statistical variable m_IncompleteTimes. It seems that there
is some problem with the initialization of these variables when allocated
in the constructor.
|
|
|
|
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created. RubyPort, which earlier used to ignore range changes now
forwards those to the piobus. The lack of piobus resulted in segmentation
fault. This patch creates a piobus even in se mode. It is not created only
when some tester is running. Secondly, I had missed out on modifying port
connections for other coherence protocols.
|
|
|
|
Currently, the interrupt controller in x86 is connected to the io bus
directly. Therefore the packets between the io devices and the interrupt
controller do not go through ruby. This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination. Note that the patch does not make these packets go through the
ruby network. That would happen in a subsequent patch.
|
|
This patch simplfies the retry logic in the RubyPort, avoiding
redundant attributes, and enforcing more stringent checks on the
interactions with the normal ports. The patch also simplifies the
routing done by the RubyPort, using the port identifiers instead of a
heavy-weight sender state.
The patch also fixes a bug in the sending of responses from PIO
ports. Previously these responses bypassed the queue in the queued
port, and ignored the return value, potentially leading to response
packets being lost.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
|
|
Code in two of the functions was exactly the same. This patch moves
this code to a new function which is called from the two functions
mentioned initially.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At several places, there are functions that take a cycle value as input
and performs some computation. Along with each such function, another
function was being defined that simply added one more cycle to input and
computed the same function. This patch removes this second copy of the
function. Places where these functions were being called have been updated
to use the original function with argument being current cycle + 1.
|
|
|
|
Two files had been incorrectly named with a .cache suffix.
--HG--
rename : src/mem/protocol/MESI_Three_Level-L0.cache => src/mem/protocol/MESI_Three_Level-L0cache.sm
rename : src/mem/protocol/MESI_Three_Level-L1.cache => src/mem/protocol/MESI_Three_Level-L1cache.sm
|
|
|
|
|
|
|
|
The introduction of parallel event queues added most of the support
needed to run multiple VMs (systems) within the same gem5
instance. This changeset fixes up signal delivery so that KVM's
control signals are delivered to the thread that executes the CPU's
event queue. Specifically:
* Timers and counters are now initialized from a separate method
(startupThread) that is scheduled as the first event in the
thread-specific event queue. This ensures that they are
initialized from the thread that is going to execute the CPUs
event queue and enables signal delivery to the right thread when
exiting from KVM.
* The POSIX-timer-based KVM timer (used to force exits from KVM) has
been updated to deliver signals to the thread that's executing KVM
instead of the process (thread is undefined in that case). This
assumes that the timer is instantiated from the thread that is
going to execute the KVM vCPU.
* Signal masking is now done using pthread_sigmask instead of
sigprocmask. The behavior of the latter is undefined in threaded
applications.
* Since signal masks can be inherited, make sure to actively unmask
the control signals when setting up the KVM signal mask.
There are currently no facilities to multiplex between multiple KVM
CPUs in the same event queue, we are therefore limited to
configurations where there is only one KVM CPU per event queue. In
practice, this means that multi-system configurations can be
simulated, but not multiple CPUs in a shared-memory configuration.
|
|
This patch updates the stats to reflect the change in kernel options
needed for armv8 (but used for all FS regressions).
|
|
Modifies FSConfig.py to enable ARMv8 compatibility.
To boot gem5 with ARMv8:
Download the v8 kernel, .dtb file, and root FS from: http://gem5.org/Download
Download the ARMv8 toolchain, and add the bin dir to your path:
http://www.linaro.org/engineering/engineering-projects/armv8
Build gem5 for ARM
Build the v8 bootloader (in gem5/system/arm/aarch64_bootloader)
Make script in gem5/system/arm/aarch64_bootloader will require v8 toolchain,
drop the produced boot_emm.arm64 in $(M5_PATH)/binaries/
Run:
$ build/ARM/gem5.fast configs/example/fs.py --machine-type=VExpress_EMM64 \
--kernel=/path/to/kernel/vmlinux-linaro-tracking \
--dtb-filename=/path/to/dtb/rtsm_ve-aemv8a.dtb \
--disk-image=/path/to/img/linaro-minimal-armv8.img
|
|
This patch fixes a bug in how physical memory used to be mapped and
unmapped. Previously we unmapped and re-mapped if restoring from a
checkpoint. However, we never checked that the new mapping was
actually the same, it was just magically working as the OS seems to
fairly reliably give us the same chunk back. This patch fixes this
issue by relying entirely on the mmap call in the constructor.
|
|
This patch enbles use of the basic PIO devices as part of the NULL
build. Although it might seem counter intuitive to have a PIO device
without being able to execute a driver, this change enables us to
break a device class hierarchy into an ISA-agnostic part, and an
ISA-specific part, without requiring multiple-inheritance. The
ISA-agnostic base class is a PIO device, but does not make use of the
port.
|
