| Age | Commit message (Collapse) | Author |
|---|
|
This patch corrects the LPDDR3 page size, which was set too low.
|
|
This patch adds stats which are used for offline power calculation
from the 'Micron Power Calculator' spreadsheet.
|
|
This patch unifies the request selection across read and write queues
for FR-FCFS scheduling policy. It also fixes the request selection
code to prioritize the row hits present in the request queues over the
selection based on earliest bank availability.
|
|
This patch adds a basic adaptive version of the open-page policy that
guides the decision to keep open or close by looking at the contents
of the controller queues. If no row hits are found, and bank conflicts
are present, then the row is closed by means of an auto
precharge. This is a well-known technique that should improve
performance in most use-cases.
|
|
This patch removes the untimed while loop in the write scheduling
mechanism and now schedule commands taking into account the minimum
timing constraint. It also introduces an optimization to track write
queue size and switch from writes to reads if the number of write
requests fall below write low threshold.
|
|
This patch adds the tRRD parameter to the DRAM controller. With the
recent addition of the actAllowedAt member for each bank, this
addition is trivial.
|
|
This patch changes the default values of the tRAS timing parameter to
be less conservative, and closer in line with existing parts.
|
|
This patch changes the tXAW constraint so that it is enforced per rank
rather than globally for all ranks in the channel. It also avoids
using the bank freeAt to enforce the activation limit, as doing so
also precludes performing any column or row command to the
DRAM. Instead the patch introduces a new variable actAllowedAt for the
banks and use this to track when a potential activation can occur.
|
|
This patch fixes the controller when a write threshold of 100% is
used. Earlier for 100% write threshold no data is written to memory
as writes never get triggered since this corner case is not
considered.
|
|
This patch changes the FCFS bit of FR-FCFS such that requests that
target the earliest available bank are picked first (as suggested in
the original work on FR-FCFS by Rixner et al). To accommodate this we
add functionality to identify a bank through a one-dimensional
identifier (bank id). The member names of the DRAMPacket are also
update to match the style guide.
|
|
This patch simplifies the DRAM model by re-using the function that
computes the busy and access time for both reads and writes.
|
|
This patch fixes an issue that allowed more than 100% bus utilisation
in certain cases.
|
|
This patch changes the time the controller is woken up to take the
next scheduling decisions. tRAS is now handled in estimateLatency and
doDRAMAccess and we do not need to worry about it at scheduling
time. The earliest we need to wake up is to do a pre-charge, row
access and column access before the bus becomes free for use.
|
|
This patch adds an explicit tRAS parameter to the DRAM controller
model. Previously tRAS was, rather conservatively, assumed to be tRCD
+ tCL + tRP. The default values for tRAS are chosen to match the
previous behaviour and will be updated later.
|
|
Match stats with new regression configs.
|
|
Keep it simple and use the SimpleMemory rather than the DRAM
controller model for atomic full-system tests.
|
|
This patch changes the name the command-line options related to debug
output to all start with "debug" rather than being a mix of that and
"trace". It also makes it clear that the breakpoint time is specified
in ticks and not in cycles.
|
|
Thumb2 ARM kernels may access the TEEHBR via thumbee_notifier
in arch/arm/kernel/thumbee.c. The Linux kernel code just seems
to be saving and restoring the register. This patch adds support
for the TEEHBR cp14 register. Note, this may be a special case
when restoring from an image that was run on a system that
supports ThumbEE.
|
|
The VE motherboard provides a set of system control registers through which
various motherboard and coretile registers are accessed. Voltage regulators and
oscillator (DLL/PLL) config are examples. These registers must be impleted to
boot Linux 3.9+ kernels.
|
|
This patch adds the registers and fields to the PCI device to support
Capability lists and to support MSI-X in the GIC.
|
|
Newer linux kernels and distros exercise more functionality in the IDE device
than previously, exposing 2 races. The first race is the handling of aborted
DMA commands would immediately report the device is ready back to the kernel
and cause already in flight commands to assert the simulator when they returned
and discovered an inconsitent device state. The second race was due to the
Status register not being handled correctly, the interrupt status bit would get
stuck at 1 and the driver eventually views this as a bad state and logs the
condition to the terminal. This patch fixes these two conditions by making the
device handle aborted commands gracefully and properly handles clearing the
interrupt status bit in the Status register.
|
|
|
|
Most other structures/stages get passed the cpu params struct.
|
|
SimObjectVector objects did not provide the same interface to
the _parent attribute through get_parent() like a normal
SimObject. It also handled assigning a _parent incorrectly
if objects in a SimObjectVector were changed post-creation,
leading to errors later when the simulator tried to execute.
This patch fixes these two omissions.
|
|
SimLoopExitEvents weren't serialized by default. Some benchmarks
utilize a delayed m5 exit pseudo op call to terminate the simulation
and this event was lost when resuming from a checkpoint generated
after the pseudo op call. This patch adds the capability to serialize
the SimLoopExitEvents and enable serialization for m5_exit and m5_fail
pseudo ops by default. Does not affect other generic
SimLoopExitEvents.
|
|
Add a "const" keywords to the getters in the Packet class so these can be
invoked on const Packet objects.
|
|
This patch adds a flag in the request class that indicates if the request
was made in privileged mode.
|
|
Changes to make m5ops work under virtualization seemed to break them working
with non-virtualized systems and the recently added m5 fail command makes
the m5op binary not compile. For now remove the code for virtualization.
|
|
Fix a problem in the O3 CPU for instructions that are both
memory loads and memory barriers (e.g. load acquire) and
to uncacheable memory. This combination can confuse the
commit stage into commitng an instruction that hasn't
executed and got it's value yet. At the same time refactor
the code slightly to remove duplication between two of
the cases.
|
|
This patch adds missing initializations of the SenderMachine field of
out_msg's when thery are created in the L2 cache controller of the
MOESI_CMP_directory coherence protocol. When an out_msg is created and this
field is left uninitialized, it is set to the default value MachineType_NUM.
This causes a panic in the MachineType_to_string function when gem5 is
executed with the Ruby debug flag on and it tries to print the message.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This patch fixes a problem where in Garnet, the enqueue time in the
VCallocator and the SWallocator which is of type Cycles was being stored
inside a variable with int type.
This lead to a known problem restoring checkpoints with garnet & the fixed
pipeline enabled. That value was really big and didn't fit in the variable
overflowing it, therefore some conditions on the VC allocation stage & the
SW allocation stage were not met and the packets didn't advance through the
network, leading to a deadlock panic right after the checkpoint was restored.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
The CoherentBus eventually got virtual methods for its interface. The
"virtuality" of the CoherentBus, however, comes already from the virtual
interface of the bus' ports. There is no need to add another layer of virtual
functions, here.
|
|
|
|
This patch adds the PortID to the QueuedMasterPort. This allows a PortID to be
specified as it previously was set to the detault value of -1.
|
|
The underlying assumption that all PPIs must be edge-triggered is
strained when the architected timers and VGIC interfaces make
level-behaviour observable. For example, a virtual timer interrupt
'goes away' when the hypervisor is entered and the vtimer is disabled;
this requires a PPI to be de-activated.
The new method simply clears the interrupt pending state.
|
|
The ethernet address param tries to convert a hexadecimal
string using int() in python, which defaults to base 10,
need to specify base 16 in this case.
|
|
SimObjects are expected to only generate one port reference per
port belonging to them. There is a subtle bug with using "not"
here as a VectorPort is seen as not having a reference if it is
either None or empty as per Python docs sec 9.9 for Standard operators.
Intended behavior is to only check if we have not created the reference.
|
|
There is an option to enable/disable all framebuffer dumps, but the
last frame always gets dumped in the run folder with no other way to
disable it. These files can add up very quickly running many experiments.
This patch adds an option to disable them. The default behavior
remains unchanged.
|
|
|
|
IEW DPRINTF uses Decode debug flag, which appears to be a copying error. This
patch changes this to the IEW Debug flag.
|
|
LSQSenderState represents the LQ/SQ index using uint8_t, which supports up to
256 entries (including the sentinel entry). Sending packets to memory with a
higher index than 255 truncates the index, such that the response matches the
wrong entry. For instance, this can result in a deadlock if a store completion
does not clear the head entry.
|
|
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
|
|
|
|
This resulted in a kernel printk that said,
"GIC CPU mask not found - kernel will fail to boot."
|
|
This change fixes an issue in the O3 CPU where an uncachable instruction
is attempted to be executed before it reaches the head of the ROB. It is
determined to be uncacheable, and is replayed, but a PanicFault is attached
to the instruction to make sure that it is properly executed before
committing. If the TLB entry it was using is replaced in the interveaning
time, the TLB returns a delayed translation when the load is replayed at
the head of the ROB, however the LSQ code can't differntiate between the
old fault and the new one. If the translation isn't complete it can't
be faulting, so clear the fault.
|
|
This patch extends the MemoryAccess debug flag to report who sent the
requests and the cacheability.
|
|
This patch changes the ProtoBuf builder such that the generated source
and header is placed in the build directory of the proto file. This
was previously not the case for the directories included as EXTRAS. To
make this work, we also ensure that the build directory for the EXTRAS
are added to the include path (which does not seem to automatically be
the case).
|
|
|
|
|
|
This patch allows setting a few additional interrupts for status
changes that should never occur.
|
