summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-17arm: Fix a GIC mask register bugAli Saidi
This resulted in a kernel printk that said, "GIC CPU mask not found - kernel will fail to boot."
2013-10-17cpu: Fix O3 uncacheable load that is replayed but misses the TLBAli Saidi
This change fixes an issue in the O3 CPU where an uncachable instruction is attempted to be executed before it reaches the head of the ROB. It is determined to be uncacheable, and is replayed, but a PanicFault is attached to the instruction to make sure that it is properly executed before committing. If the TLB entry it was using is replaced in the interveaning time, the TLB returns a delayed translation when the load is replayed at the head of the ROB, however the LSQ code can't differntiate between the old fault and the new one. If the translation isn't complete it can't be faulting, so clear the fault.
2013-10-17mem: Make MemoryAccess flag more verboseAli Saidi
This patch extends the MemoryAccess debug flag to report who sent the requests and the cacheability.
2013-10-17build: Place proto output in the same directory, also for EXTRASAndreas Hansson
This patch changes the ProtoBuf builder such that the generated source and header is placed in the build directory of the proto file. This was previously not the case for the directories included as EXTRAS. To make this work, we also ensure that the build directory for the EXTRAS are added to the include path (which does not seem to automatically be the case).
2013-10-17arm, config: Fix a small issue with the dtb file being specifiedAli Saidi
2013-10-17config: Fix memtest example scriptAli Saidi
2013-10-17dev: Allow additional UART interrupts to be setAli Saidi
This patch allows setting a few additional interrupts for status changes that should never occur.
2013-10-17build: Enable color diagnostics in clang by preserving TERM.Stan Czerniawski
2013-10-16kvm: Fix latency calculation of IPR accessesAndreas Sandberg
When handling IPR accesses in doMMIOAccess, the KVM CPU used clockEdge() to convert between cycles and ticks. This is incorrect since doMMIOAccess is supposed to return a latency in ticks rather than when the access is done. This changeset fixes this issue by returning clockPeriod() * ipr_delay instead.
2013-10-16test: update statsSteve Reinhardt
Update stats for recent changes. Mostly minor changes in register access stats due to addition of new cc register type and slightly different (and more accurate) classification of int vs. fp register accesses.
2013-10-15ruby: eliminate non-determinism from ruby.stats outputSteve Reinhardt
Get rid of non-deterministic "stats" in ruby.stats output such as time & date of run, elapsed & CPU time used, and memory usage. These values cause spurious miscomparisons when looking at output diffs (though they don't affect regressions, since the regressions pass/fail status currently ignores ruby.stats entirely). Most of this information is already captured in other places (time & date in stdout, elapsed time & mem usage in stats.txt), where the regression script is smart enough to filter it out. It seems easier to get rid of the redundant output rather than teaching the regression tester to ignore the same information in two different places.
2013-10-15scons: fix minor update-ref bug in regressionsSteve Reinhardt
In the unusual case that regressions are run with --update-ref when there is no existing regression output, scons gets confused because it depends on stats.txt to trigger the update, but it has no indication that running the test will generate the stats.txt file. (In the typical case where stats.txt already exists, scons doesn't care about where it came from.) It's easy to fix this just by adding the stats.txt file to the target list for the test action.
2013-10-15arch/x86: add support for explicit CC register fileYasuko Eckert
Convert condition code registers from being specialized ("pseudo") integer registers to using the recently added CC register class. Nilay Vaish also contributed to this patch.
2013-10-15cpu: add a condition-code register classYasuko Eckert
Add a third register class for condition codes, in parallel with the integer and FP classes. No ISAs use the CC class at this point though.
2013-10-15cpu/o3: clean up rename map and free listSteve Reinhardt
Restructured rename map and free list to clean up some extraneous code and separate out common code that can be reused across different register classes (int and fp at this point). Both components now consist of a set of Simple* objects that are stand-alone rename map & free list for each class, plus a Unified* object that presents a unified interface across all register classes and then redirects accesses to the appropriate Simple* object as needed. Moved free list initialization to PhysRegFile to better isolate knowledge of physical register index mappings to that class (and remove the need to pass a number of parameters to the free list constructor). Causes a small change to these stats: cpu.rename.int_rename_lookups cpu.rename.fp_rename_lookups because they are now categorized on a per-operand basis rather than a per-instruction basis. That is, an instruction with mixed fp/int/misc operand types will have each operand categorized independently, where previously the lookup was categorized based on the instruction type.
2013-10-15cpu: rename *_DepTag constants to *_Reg_BaseSteve Reinhardt
Make these names more meaningful. Specifically, made these substitutions: s/FP_Base_DepTag/FP_Reg_Base/g; s/Ctrl_Base_DepTag/Misc_Reg_Base/g; s/Max_DepTag/Max_Reg_Index/g;
2013-10-15isa: clean up register constantsSteve Reinhardt
Clean up and add some consistency to the *_Base_DepTag constants as well as some related register constants: - Get rid of NumMiscArchRegs, TotalArchRegs, and TotalDataRegs since they're never used and not always defined - Set FP_Base_DepTag = NumIntRegs when possible (i.e., every case except x86) - Set Ctrl_Base_DepTag = FP_Base_DepTag + NumFloatRegs (this was true before, but wasn't always expressed that way) - Drastically reduce the number of arbitrary constants appearing in these calculations
2013-10-15cpu/o3: clean up scoreboard objectSteve Reinhardt
It had a bunch of fields (and associated constructor parameters) thet it didn't really use, and the array initialization was needlessly verbose. Also just hardwired the getReg() method to aleays return true for misc regs, rather than having an array of bits that we always kept marked as ready.
2013-10-15cpu/o3: clean up physical register fileSteve Reinhardt
No need for PhysRegFile to be a template class, or have a pointer back to the CPU. Also made some methods for checking the physical register type (int vs. float) based on the phys reg index, which will come in handy later.
2013-10-15cpu/inorder: merge register class enumsSteve Reinhardt
The previous patch introduced a RegClass enum to clean up register classification. The inorder model already had an equivalent enum (RegType) that was used internally. This patch replaces RegType with RegClass to get rid of the now-redundant code.
2013-10-15cpu: clean up architectural register classificationSteve Reinhardt
Move from a poorly documented scheme where the mapping of unified architectural register indices to register classes is hardcoded all over to one where there's an enum for the register classes and a function that encapsulates the mapping.
2013-10-15mem: Rename the ASI_BITS flag field in RequestAndreas Sandberg
ASI_BITS in the Request object were originally used to store a memory request's ASI on SPARC. This is not the case any more since other ISAs use the ASI bits to store architecture-dependent information. This changeset renames the ASI_BITS to ARCH_BITS which better describes their use. Additionally, the getAsi() accessor is renamed to getArchFlags().
2013-10-15mem: Use a flag instead of address bit 63 for generic IPRsAndreas Sandberg
Using address bit 63 to identify generic IPRs caused problems on SPARC, where IPRs are heavily used. This changeset redefines how generic IPRs are identified. Instead of using bit 63, we now use a separate flag (GENERIC_IPR) a memory request.
2013-10-14Added tag stable_2013_10_14 to the changeset 6a043adb1e8dNilay Vaish
2013-10-09config: correct example ruby scriptsNilay Vaish
A couple of recent changesets added/deleted/edited some variables that are needed for running the example ruby scripts. This changeset edits these scripts to bring them to a working state.
2013-10-09stats: Bump pc-simple-timing-ruby statsAndreas Hansson
This patch simply brings the stats for the pc-simple-timing-ruby regression up to date. The particular regression seems to give different results on different systems unfortunately, and this update reflects the current behaviour on zizzer.
2013-10-07config: set cwd for processes in se.pyNilay Vaish
2013-10-07x86: enables lstat and readlink syscallsNilay Vaish
2013-10-07base: Fix a potential race in PollQueue::setupAsyncIOAndreas Sandberg
There is a potential race between enabling asynchronous IO and selecting the target for the SIGIO signal. This changeset move the F_SETOWN call to before the F_SETFL call that enables SIGIO delivery. This ensures that signals are always sent to the correct process.
2013-10-03kvm: Service events in the instruction event queuesAndreas Sandberg
This changset adds calls to the service the instruction event queues that accidentally went missing from commit [0063c7dd18ec]. The original commit only included the code needed to schedule instruction stops from KVM and missed the functionality to actually service the events.
2013-10-02kvm: Only include KVM support for supported kernelsAndreas Hansson
This patch adds a check to ensure that the KVM API provided by the running kernel is what we are expecting.
2013-10-02ext: Fix fputils compiler flags to ensure ISO C99Andreas Hansson
The fp code relies on C99, and depending on gcc version, the default is to use c89. This patch adds -std=c99 when using gcc to ensure the code is compiled in ISO C99 mode.
2013-10-02stats: Update x86 stats after x87 fixesAndreas Sandberg
The updates to the x87 caused the stats for several regressions to change. This was mainly caused by the addition of a working 32-bit and 80-bit FP load instruction and xsave support.
2013-10-01scons, kvm: Check for the presence of POSIX timersAndreas Sandberg
The kvm-based CPU module requires support for POSIX timers. This changeset adds a check for POSIX timers and ensures that gem5 is linked with librt if necessary. KVM support is disabled if POSIX timers are not supported by the host. This fixes a compilation issue for some glibc versions where clock_nanosleep and timer_create are in different libraries.
2013-10-01ext: Update fputils to rev 52b6190b4eAndreas Sandberg
This changeset updates the external library to git revision 52b6190b4e. This update includes changes that fix compilation errors on old gcc versions and fixes to test a case that affect ICC.
2013-09-30x86: Add support for m5ops through a memory mapped interfaceAndreas Sandberg
In order to support m5ops in virtualized environments, we need to use a memory mapped interface. This changeset adds support for that by reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR interface for m5ops. The mapping is done in the X86ISA::TLB::finalizePhysical() which means that it just works for all of the CPU models, including virtualized ones.
2013-09-30arch: Add support for m5ops using mmapped IPRsAndreas Sandberg
In order to support m5ops on virtualized CPUs, we need to either intercept hypercall instructions or provide a memory mapped m5ops interface. Since KVM does not normally pass the results of hypercalls to userspace, which makes that method unfeasible. This changeset introduces support for m5ops using memory mapped mmapped IPRs. This is implemented by adding a class of "generic" IPRs which are handled by architecture-independent code. Such IPRs always have bit 63 set and are handled by handleGenericIprRead() and handleGenericIprWrite(). Platform specific impementations of handleIprRead and handleIprWrite should use GenericISA::isGenericIprAccess to determine if an IPR address should be handled by the generic code instead of the architecture-specific code. Platforms that don't need their own IPR support can reuse GenericISA::handleIprRead() and GenericISA::handleIprWrite().
2013-09-30x86: Add support for FXSAVE, FXSAVE64, FXRSTOR, and FXRSTOR64Andreas Sandberg
2013-09-30x86: Add support for FLDENV & FNSTENVAndreas Sandberg
2013-09-30x86: Add support for loading 32-bit and 80-bit floats in the x87Andreas Sandberg
The x87 FPU supports three floating point formats: 32-bit, 64-bit, and 80-bit floats. The current gem5 implementation supports 32-bit and 64-bit floats, but only works correctly for 64-bit floats. This changeset fixes the 32-bit float handling by correctly loading and rounding (using truncation) 32-bit floats instead of simply truncating the bit pattern. 80-bit floats are loaded by first loading the 80-bits of the float to two temporary integer registers. A micro-op (cvtint_fp80) then converts the contents of the two integer registers to the internal FP representation (double). Similarly, when storing an 80-bit float, there are two conversion routines (ctvfp80h_int and cvtfp80l_int) that convert an internal FP register to 80-bit and stores the upper 64-bits or lower 32-bits to an integer register, which is the written to memory using normal integer stores.
2013-09-30x86: Fix re-entrancy problems in x87 store instructionsAndreas Sandberg
X87 store instructions typically loads and pops the top value of the stack and stores it in memory. The current implementation pops the stack at the same time as the floating point value is loaded to a temporary register. This will corrupt the state of the x87 stack if the store fails. This changeset introduces a pop87 micro-instruction that pops the stack and uses this instruction in the affected macro-instructions to pop the stack after storing the value to memory.
2013-09-30kvm: Add support for thread-specific instruction eventsAndreas Sandberg
Instruction events are currently ignored when executing in KVM. This changeset adds support for triggering KVM exits based on instruction counts using hardware performance counters. Depending on the underlying performance counter implementation, there might be some inaccuracies due to instructions being counted in the host kernel when entering/exiting KVM. Due to limitations/bugs in Linux's performance counter interface, we can't reliably change the period of an overflow counter. We work around this issue by detaching and reattaching the counter if we need to reconfigure it.
2013-09-30config: Add a 'kvm' CPU aliasAndreas Sandberg
Add a CPU alias, 'kvm', for the first available KVM-accelerated CPU model.
2013-09-30kvm: FPU synchronization support on x86Andreas Sandberg
This changeset adds support for synchronizing the FPU and SIMD state of a virtual x86 CPU with gem5. It supports both the XSave API and the KVM_(GET|SET)_FPU kernel API. The XSave interface can be disabled using the useXSave parameter (in case of kernel issues). Unfortunately, KVM_(GET|SET)_FPU interface seems to be buggy in some kernels (specifically, the MXCSR register isn't always synchronized), which means that it might not be possible to synchronize MXCSR on old kernels without the XSave interface. This changeset depends on the __float80 type in gcc and might not build using llvm.
2013-09-30x86: Add support routines to load and store 80-bit floatsAndreas Sandberg
The x87 FPU on x86 supports extended floating point. We currently handle all floating point on x86 as double and don't support 80-bit loads/stores. This changeset add a utility function to load and convert 80-bit floats to doubles (loadFloat80) and another function to store doubles as 80-bit floats (storeFloat80). Both functions use libfputils to do the conversion in software. The functions are currently not used, but are required to handle floating point in KVM and to properly support all x87 loads/stores.
2013-09-30ext: Include libfputilsAndreas Sandberg
This changeset includes libfputils from revision bbf0d61d75. This library can be used to convert to and from 80-bit floats and query the type of an 80-bit float, which is needed to support the x87 FPU.
2013-09-30x86: Add limited support for extracting function call argumentsAndreas Sandberg
Add support for extracting the first 6 64-bit integer argumements to a function call in X86ISA::getArgument().
2013-09-30kvm: x86: Fix segment registers to make them VMX compatibleAndreas Sandberg
There are cases when the segment registers in gem5 are not compatible with VMX. This changeset works around all known such issues. Specifically: * The accessed bits in CS, SS, DD, ES, FS, GS are forced to 1. * The busy bit in TR is forced to 1. * The protection level of SS is forced to the same protection level as CS. The difference /seems/ to be caused by a bug in gem5's x86 implementation.
2013-09-28tests: update reference outputsSteve Reinhardt
Apparently only stats.txt was updated the last time, so this changeset updates other reference output files (config.ini, simout, simerr, ruby.stats) so that test output diffs should not be cluttered with irrelevant changes. There are a few stats.txt updates too, but they are in the minority.
2013-09-25kvm: Add x86 segment register verification to help debuggingAndreas Sandberg