Age | Commit message (Collapse) | Author |
|
This never actually worked since it was printing out only a word
of the cache block and not the entire thing and doubly didn't work
csprintf overrides the %#x specifier and assumes a char* array is
actually a string.
|
|
FailUnimplemented passed a stack created mnemonic as a const char * which
causes some grief when the stack goes away.
|
|
O3CPU has a compile-time maximum width set in o3/impl.hh, but checking
the configuration against this limit was not implemented anywhere
except for fetch. Configuring a wider pipe than the limit can silently
cause various issues during the simulation. This patch adds the proper
checking in the constructor of the various pipeline stages.
|
|
Without this declaration, new clangs will complain about this value
being unused. It has no explicit use in the codebase, but it can be
useful to turn on all debugging flags while in a debugger to greatly
increase simulator verbosity.
|
|
SCons already does this for all build steps.
|
|
As suggested by Nathan Binkert in 2008:
http://permalink.gmane.org/gmane.comp.emulators.m5.users/2676
|
|
|
|
+ changes to one ruby regression config.ini file.
|
|
Has not been maintained at all. Since there is alternate documentation
available on gem5.org, no need to have this separately.
|
|
It had an unnecessary pairs token which is being removed.
|
|
A number of calls to isEmpty() and numFreeEntries()
should be thread-specific.
In cpu.cc, the fact that tid is /*commented*/ out is a bug. Say the rob
has instructions from thread 0 (isEmpty() returns false), and none from
thread 1. If we are trying to squash all of thread 1, then
readTailInst(thread 1) will be called because rob->isEmpty() returns
false. The result is end_it is not in the list and the while
statement loops indefinitely back over the cpu's instList.
In iew_impl.hh, all threads are told they have the entire remaining IQ, when
each thread actually has a certain allocation. The result is extra stalls at
the iew dispatch stage which the rename stage usually takes care of.
In commit_impl.hh, rob->readHeadInst(thread 1) can be called if the rob only
contains instructions from thread 0. This returns a dummyInst (which may work
since we are trying to squash all instructions, but hardly seems like the right
way to do it).
In rob_impl.hh this fix skips the rest of the function more frequently and is
more efficient.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Upon aggregating records, serialize system's cache-block size, as the
cache-block size can be different when restoring from a checkpoint. This way,
we can correctly read all records when restoring from a checkpoints, even if
the cache-block size is different.
Note, that it is only possible to restore from a checkpoint if the
desired cache-block size is smaller or equal to the cache-block size
when the checkpoint was taken; we can split one larger request into
multiple small ones, but it is not reliable to do the opposite.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
It is not in use and not required as such.
|
|
|
|
This patch fixes an issue with the way the python-config path is
parsed, as it caused issues on systems where a newline ended up being
included in the path.
|
|
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Compile gem5 on systems where python2 and python3 co-exists without any
changes in path. python2-config is chosen over python-config if it exists.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
Simulating a SMP or multicore requires devices to be shared between
multiple KVM vCPUs. This means that locking is required when accessing
devices. This changeset adds the necessary locking to allow devices to
execute correctly. It is implemented by temporarily migrating the KVM
CPU to the VM's (and devices) event queue when handling
MMIO. Similarly, the VM migrates to the interrupt controller's event
queue when delivering an interrupt.
The support for fast-forwarding of multicore simulations added by this
changeset assumes that all devices in a system are simulated in the
same thread and each vCPU has its own thread. Special care must be
taken to ensure that devices living under the CPU in the object
hierarchy (e.g., the interrupt controller) do not inherit the parent
CPUs thread and are assigned to device thread. The KvmVM object is
assumed to live in the same thread as the other devices in the system.
|
|
The calling thread is undefined when the PollQueue services events.
This implies that PollEvents need to handle the case where they are
processed from a different thread than the thread that created the
event. This changeset adds temporary event queue migrations to the VNC
server, the ethernet tap device, and the terminal to protect them from
inter-thread calls.
|
|
As of now, the enqueue statement can take in any number of 'pairs' as
argument. But we only use the pair in which latency is the key. This
latency is allowed to be either a fixed integer or a member variable of
controller in which the expression appears. This patch drops the use of pairs
in an enqueue statement. Instead, an expression is allowed which will be
interpreted to be the latency of the enqueue. This expression can anything
allowed by slicc including a constant integer or a member variable.
|
|
The phrase is no longer valid since we do not distinguish between
inter and intra chip communication.
|
|
We need the ability to lock event queues to enable device accesses
across threads. The serviceOne() method now takes a service lock prior
to handling a new event. By locking an event queue, a different
thread/eq can effectively execute in the context of the locked event
queue. To simplify temporary event queue migrations, this changeset
introduces the EventQueue::ScopedMigration class that unlocks the
current event queue, locks a new event queue, and updates the current
event queue variable.
In order to prevent deadlocks, event queues need to be released when
waiting on barriers. This is implemented using the
EventQueue::ScopedRelease class. An instance of this class is, for
example, used in the BaseGlobalEvent class to release the event queue
when waiting on the synchronization barrier.
The intended use for this functionality is when devices need to be
accessed across thread boundaries. For example, when fast-forwarding,
it might be useful to run devices and CPUs in separate threads. In
such a case, the CPU locks the device queue whenever it needs to
perform IO. This functionality is primarily intended for KVM.
Note: Migrating between event queues can lead to non-deterministic
timing. Use with extreme care!
--HG--
extra : rebase_source : 23e3a741a1fd73861d1339782dbbe1bc76285315
|
|
this patch adds the source for mcpat, a power, area, and timing modeling
framework.
|
|
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so
2) addes jni_gem5Op.h to clean since it is added during make
3) links the m5 utility statically since it won't work on some images otherwise
|
|
A recent changeset altered the default memory class to DRAMCtrl. In se mode,
ruby uses the physical memory to check if a given address is within the bounds
of the physical memory. SimpleMemory is enough for this. Moreover,
SimpleMemory does not check whether it is connected or not, something which
DRAMCtrl does.
|
|
This patch fixes violation of TSO in the O3CPU, as all loads must be
ordered with all other loads. In the LQ, if a snoop is observed, all
subsequent loads need to be squashed if the system is TSO.
Prior to this patch, the following case could be violated:
P0 | P1 ;
MOV [x],mail=/usr/spool/mail/nilay | MOV EAX,[y] ;
MOV [y],mail=/usr/spool/mail/nilay | MOV EBX,[x] ;
exists (1:EAX=1 /\ 1:EBX=0) [is a violation]
The problem was found using litmus [http://diy.inria.fr].
Committed by: Nilay Vaish <nilay@cs.wisc.edu
|
|
This patch updates the stats to reflect the changes to the DRAM
controller.
|
|
This patch adds stats for tracking the number of reads/writes per bus
turn around, and also adds hysteresis to the write-to-read switching
to ensure that the queue does not oscilate around the low threshold.
|
|
This patch renames the not-so-simple SimpleDRAM to a more suitable
DRAMCtrl. The name change is intended to ensure that we do not send
the wrong message (although the "simple" in SimpleDRAM was originally
intended as in cleverly simple, or elegant).
As the DRAM controller modelling work is being presented at ISPASS'14
our hope is that a broader audience will use the model in the future.
--HG--
rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py
rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc
rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
|
|
Make the default memory type DDR3-1600 x64, and use the open-adaptive
page policy. This change is aiming to ensure that users by default are
using a realistic memory system.
|
|
This patch adds a second adaptive page policy to the DRAM controller,
closing the page unless there are already queued accesses to the open
page.
|
|
Minor tidying up and removing of redundant code, including the
printing of queue state every million accesses.
|
|
This patch ensures that we do not sample the bytes per activate when
the row has already been closed.
|
|
This patch adds a basic starvation-prevention mechanism where a DRAM
page is forced to close after a certain number of accesses. The limit
is combined with the open and open-adaptive page policy and if reached
causes an auto-precharge.
|
|
This patch changes the triggering condition for the write draining
such that we grab the opportunity to issue writes if there are no
reads waiting (as opposed to waiting for the writes to reach the high
threshold). As a result, we potentially drain some of the writes in read
idle periods (if any).
A low threshold is added to be able to control how many write bursts
are kept in the memory controller queue (acting as on-chip storage).
The high and low thresholds are updated to sensible values for a 32/64
size write buffer. Note that the thresholds should be adjusted along
with the queue sizes.
This patch also adds some basic initialisation sanity checks and moves
part of the initialisation to the constructor.
|
|
This patch adds a configuration that simplifies evaluation of DRAM
controller configurations by automating a sweep of stride size and
bank parallelism. It works in a rather unconventional way, as it needs
to print the traffic generator stimuli based on the memory
organisation. Hence, it starts by configuring the memory, then it
prints a traffic-generator config file, and loads it.
The resulting stats have one period per data point, identified by the
stride size, and the number of banks being used.
|
|
This patch enables a new 'DRAM' mode to the existing traffic
generator, catered to generate specific requests to DRAM based on
required hit length (stride size) and bank utilization. It is an add on
to the Random mode.
The basic idea is to control how many successive packets target the
same page, and how many banks are being used in parallel. This gives a
two-dimensional space that stresses different aspects of the DRAM
timing.
The configuration file needed to use this patch has to be changed as
follow: (reference to Random Mode, LPDDR3 memory type)
'STATE 0 10000000000 RANDOM 50 0 134217728 64 3004 5002 0'
-> 'STATE 0 10000000000 DRAM 50 0 134217728 32 3004 5002 0 96 1024 8 6 1'
The last 4 parameters to be added are:
<stride size (bytes), page size(bytes), number of banks available in DRAM,
number of banks to be utilized, address mapping scheme>
The address mapping information is used to get the stride address
stream of the specified size and to know where to find the bank
bits. The configuration file has a parameter where '0'-> RoCoRaBaCh,
'1'-> RoRaBaCoCh/RoRaBaChCo address-mapping schemes. Note that the
generator currently assumes a single channel and a single rank. This
is to avoid overwhelming the traffic generator with information about
the memory organisation.
|
|
This patch adds a new DDR3 configuration to match with the parameters
that are specified in one of the DDR3 configs used in DRAMSim2.
|
|
This patch adds the row bits to the name of the address mapping
schemes to make it more clear that all the current schemes places the
row bits as the most significant bits.
|
|
make 'scons -s' actually silent.
|
|
Check the right flag.
|
|
This patch moves the Ruby-related debug flags to the ruby
sub-directory, and also removes the state SConsopts that add the
no-longer-used NO_VECTOR_BOUNDS_CHECK.
|
|
This patch adds support for automatically detecting a gzipped packet
trace, thus accepting either a compressed or uncompressed trace.
|
|
This patch makes sure DRAMSim2 is included in a build of the NULL ISA.
|
|
This patch fixes a typo in the SConscript which caused the DRAMSim2
sources to be built without the appropriate flags.
|
|
Add a warning to the CommMonitor which will alert the user if they try
and record a trace when the system is not in timing mode.
|
|
Prevent incomplete configuration of TrafficGen class from causing
segmentation faults. If an 'INIT' line is not present in the
configuration file then the currState variable will remain
uninitialized which may result in a crash.
|
|
cxx_header was set incorrectly on IsaFake
|
|
There were several sections of the m5ops code which were
essentially copy/pasted versions of the 32-bit code. The
problem is that some of these didn't account fo4 64-bit
registers leading to arguments being in the wrong registers.
This patch addresses the args for readfile64, writefile64,
and addsymbol64 -- all of which seemed to suffer from a
similar set of problems when moving to 64-bit.
|
|
This patch fixes the unit used in all error messages.
|