summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-27sim: Add the notion of clock domains to all ClockedObjectsAkash Bagdia
This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27config: Add a BaseSESystem builder for re-use in regressionsAndreas Hansson
This patch extends the existing system builders to also include a syscall-emulation builder. This builder is deployed in all syscall-emulation regressions that do not involve Ruby, i.e. o3-timing, simple-timing and simple-atomic, as well as the multi-processor regressions o3-timing-mp, simple-timing-mp and simple-atomic-mp (the latter are only used by SPARC at this point). The values chosen for the cache sizes match those that were used in the existing config scripts (despite being on the large side). Similarly, a mem_class parameter is added to the builder base class to enable simple-atomic to use SimpleMemory and o3-timing to use the default DDR3 configuration. Due to the different order the ports are connected, the bus stats get shuffled around for the multi-processor regressions. A separate patch bumps the port indices. Besides this, all behaviour is exactly the same.
2013-06-27config: Rename clock option to Ruby clockAkash Bagdia
This patch changes the 'clock' option to 'ruby-clock' as it is only used by Ruby.
2013-06-27config: Add a system clock command-line optionAkash Bagdia
This patch adds a 'sys_clock' command-line option and use it to assign clocks to the system during instantiation. As part of this change, the default clock in the System class is removed and whenever a system is instantiated a system clock value must be set. A default value is provided for the command-line option. The configs and tests are updated accordingly.
2013-06-27config: Add a CPU clock command-line optionAkash Bagdia
This patch adds a 'cpu_clock' command-line option and uses the value to assign clocks to components running at the CPU speed (L1 and L2 including the L2-bus). The configuration scripts are updated accordingly. The 'clock' option is left unchanged in this patch as it is still used by a number of components. In follow-on patches the latter will be disambiguated further.
2013-06-27config: Remove redundant explicit setting of default clocksAkash Bagdia
This patch removes the explicit setting of the clock period for certain instances of CoherentBus, NonCoherentBus and IOCache where the specified clock is same as the default value of the system clock. As all the values used are the defaults, there are no performance changes. There are similar cases where the toL2Bus is set to use the parent CPU clock which is already the default behaviour. The main motivation for these simplifications is to ease the introduction of clock domains.
2013-06-27tests: Prune 00.gzip from the regressionsAndreas Hansson
This patch prunes the 00.gzip regressions with the main motivation being that it adds little (or no) coverage and requires a substantial amount of run time. A complete regression run, including compilation from a clean repo, is almost 20% faster(!).
2013-06-27mem: Tidy up the bridge with const and additional checksAndreas Hansson
This patch does a bit of tidying up in the bridge code, adding const where appropriate and also removing redundant checks and adding a few new ones. There are no changes to the behaviour of any regressions.
2013-06-27mem: Fix CommMonitor style and response checkAndreas Hansson
This patch fixes the CommMonitor local variable names, and also introduces a variable to capture if it expects to see a response. The latter check considers both needsResponse and memInhibitAsserted.
2013-06-27mem: Align cache timing to clock edgesAndreas Hansson
This patch changes the cache timing calculations such that the results are aligned to clock edges. Plenty stats change as a results of this patch.
2013-06-27cpu: Consider instructions waiting for FU completion in drainingAndreas Hansson
This patch changes the IEW drain check to include the FU pool as there can be instructions that are "stored" in FU completion events and thus not covered by the existing checks. With this patch, we simply include a check to see if all the FUs are considered non-busy in the next tick. Without this patch, the pc-switcheroo-full regression fails after minor changes to the cache timing (aligning to clock edge).
2013-06-27mem: Cycles converted to Ticks in atomic cache accessesAndreas Hansson
This patch fixes an outstanding issue in the cache timing calculations where an atomic access returned a time in Cycles, but the port forwarded it on as if it was in Ticks. A separate patch will update the regression stats.
2013-06-27scons: Identify runs that fail and runs with stats differencesAndreas Hansson
This patch changes the regression script such that it is possible to identify the runs that fail with an exit code, and those that finish with stats differences. The ones that truly fail are reported as FAILED, and those that finish with changed stats as CHANGED. The yellow colour has been reclaimed from the skipped regressions and is now used for the changed ones. With no obvious good option left the skipped ones are now in cyan. While I was editing the script I also bumped any occurence of M5 to gem5.
2013-06-27base: Fix address range granularity calculationAndreas Hansson
This patch fixes a bug in the granularity calculation. For example, if the high bit is 6 (counting from 0) and we have one interleaving bit, then the granularity is now 2 ** (6 - 1 + 1) = 64.
2013-06-27mem: Remove a redundant heap allocation for a snoop packetAndreas Hansson
This patch changes the updards snoop packet to avoid allocating and later deleting it. As the code executes in 0 time and the lifetime of the packet does not extend beyond the block there is no reason to heap allocate it.
2013-06-27mem: Remove CoherentBus snoop port unused private memberAndreas Hansson
This patch removes an unused member to avoid getting compiler warnings when using clang.
2013-06-27stats: Remove printing of SparseHist totalSascha Bischoff
This patch removes the printing of the SparseHist total in the stats.txt output file. This has been removed as a sparse histogram has no total, and therefore this was printing out the value of a non-local, unrelated variable.
2013-06-25stats: updates due to changes to stat collection in rubyNilay Vaish
2013-06-25ruby: moesi cmp directory: separate actions for external hitsNilay Vaish
This patch adds separate actions for requests that missed in the local cache and messages were sent out to get the requested line. These separate actions are required for differentiating between the hit and miss latencies in the statistics collected.
2013-06-25ruby: mesi cmp directory: separate actions for external hitsNilay Vaish
This patch adds separate actions for requests that missed in the local cache and messages were sent out to get the requested line. These separate actions are required for differentiating between the hit and miss latencies in the statistics collected.
2013-06-25ruby: profiler: lots of inter-related changesNilay Vaish
The patch started of with removing the global variables from the profiler for profiling the miss latency of requests made to the cache. The corrresponding histograms have been moved to the Sequencer. These are combined together when the histograms are printed. Separate histograms are now maintained for tracking latency of all requests together, of hits only and of misses only. A particular set of histograms used to use the type GenericMachineType defined in one of the protocol files. This patch removes this type. Now, everything that relied on this type would use MachineType instead. To do this, SLICC has been changed so that multiple machine types can be declared by a controller in its preamble.
2013-06-24stats: Bump x86 statsAndreas Hansson
This patch bumps the x86 stats to reflect the recent fixes.
2013-06-24ruby: remove the three files related to profilingNilay Vaish
This patch removes the following three files: RubySlicc_Profiler.sm, RubySlicc_Profiler_interface.cc and RubySlicc_Profiler_interface.hh. Only one function prototyped in the file RubySlicc_Profiler.sm. Rest of the code appearing in any of these files is not in use. Therefore, these files are being removed. That one single function, profileMsgDelay(), is being moved to the protocol files where it is in use. If we need any of these deleted functions, I think the right way to make them visible is to have the AbstractController class in a .sm and let the controller state machine inherit from this class. The AbstractController class can then have the prototypes of these profiling functions in its definition.
2013-06-24ruby: MessageBuffer: Remove unused m_size variableJoel Hestness ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
The m_size variable attempted to track m_prio_heap.size(), but it did so incorrectly due to the functions reanalyzeMessages and reanalyzeAllMessages(). Since this variable is intended to track m_prio_heap.size(), we can simply replace instances where m_size is referenced with m_prio_heap.size(), which has the added bonus of removing the need for m_size. Note: This patch also removes an extraneous DPRINTF format string designator from reanalyzeAllMessages() Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-06-20ruby: fix typo in MOESI_CMP_token protocolLena Olson
2013-06-18ruby: Fix prefetching for MESI_CMP_DirectoryLena Olson
Transitions from present on PF_Ifetch were missing, causing a crash when prefetching is enabled. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-06-18ruby: fix slicc compiler to complain about duplicate symbolsLena Olson
Previously, .sm files were allowed to use the same name for a type and a variable. This is unnecessarily confusing and has some bad side effects, like not being able to declare later variables in the same scope with the same type. This causes the compiler to complain and die on things like Address Address. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-06-18ruby: restrict Address to being a type and not a variable nameLena Olson
Change all occurrances of Address as a variable name to instead use Addr. Address is an allowed name in slicc even when Address is also being used as a type, leading to declarations of "Address Address". While this works, it prevents adding another field of type Address because the compiler then thinks Address is a variable name, not type. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-06-18x86: Add support for maintaining the x87 tag wordAndreas Sandberg
The current implementation of the x87 never updates the x87 tag word. This is currently not a big issue since the simulated x87 never checks for stack overflows, however this becomes an issue when switching between a virtualized CPU and a simulated CPU. This changeset adds support, which is enabled by default, for updating the tag register to every floating point microop that updates the stack top using the spm mechanism. The new tag words is generated by the helper function X86ISA::genX87Tags(). This function is currently limited to flagging a stack position as valid or invalid and does not try to distinguish between the valid, zero, and special states.
2013-06-18x86: Fix loading of floating point constantsAndreas Sandberg
This changeset actually fixes two issues: * The lfpimm instruction didn't work correctly when applied to a floating point constant (it did work for integers containing the bit string representation of a constant) since it used reinterpret_cast to convert a double to a uint64_t. This caused a compilation error, at least, in gcc 4.6.3. * The instructions loading floating point constants in the x87 processor didn't work correctly since they just stored a truncated integer instead of a double in the floating point register. This changeset fixes the old microcode by using lfpimm instruction instead of the limm instructions.
2013-06-18x86: Initialize the MXCSR registerAndreas Sandberg
2013-06-18x86: Make the boot state VMX compliantAndreas Sandberg
This patch allows the default x86 state to be used when by CPUs that use hardware virtualization.
2013-06-18x86: Make fprem like the fprem on a real x87Andreas Sandberg
The current implementation of fprem simply does an fmod and doesn't simulate any of the iterative behavior in a real fprem. This isn't normally a problem, however, it can lead to problems when switching between CPU models. If switching from a real CPU in the middle of an fprem loop to a simulated CPU, the output of the fprem loop becomes correupted. This changeset changes the fprem implementation to work like the one on real hardware.
2013-06-18kvm: Use the address finalization code in the TLBAndreas Sandberg
Reuse the address finalization code in the TLB instead of replicating it when handling MMIO. This patch also adds support for injecting memory mapped IPR requests into the memory system.
2013-06-18x86: Add helper functions to access rflagsAndreas Sandberg
The rflags register is spread across several different registers. Most of the flags are stored in MISCREG_RFLAGS, but some are stored in microcode registers. When accessing RFLAGS, we need to reconstruct it from these registers. This changeset adds two functions, X86ISA::getRFlags() and X86ISA::setRFlags(), that take care of this magic.
2013-06-18x86: Fix the flag handling code in FABS and FCHSAndreas Sandberg
This changeset fixes two problems in the FABS and FCHS implementation. First, the ISA parser expects the assignment in flag_code to be a pure assignment and not an and-assignment, which leads to the isa_parser omitting the misc reg update. Second, the FCHS and FABS macro-ops don't set the SetStatus flag, which means that the default micro-op version, which doesn't update FSW, is executed.
2013-06-16Added tag stable_2013_06_16 for changeset 07352f119e48Nilay Vaish
2013-06-13config: Do not instantiate membus when using rubyNilay Vaish
This patch moves the instantiation of system.membus in se.py to the area of code where classic memory system has been dealt with. Ruby does not require this bus and hence it should not be instantiated.
2013-06-11kvm: Add more VM statsAndreas Sandberg
This changeset adds the following stats to KVM: * numVMHalfEntries: Number of entries into KVM to finalize pending IO operations without executing guest instructions. These typically happen as a result of a drain where the guest must finalize some operations before the guest state is consistent. * numExitSignal: Number of VM exits that have been triggered by a signal. These usually happen as a result of the timer that limits the time spent in KVM.
2013-06-11kvm: Separate host frequency from simulated CPU frequencyAndreas Sandberg
We used to use the KVM CPU's clock to specify the host frequency. This was not ideal for several reasons. One of them being that the clock parameter of a CPU determines the frequency of some of the components connected to the CPU. This changeset adds a separate hostFreq parameter that should be used to specify the host frequency until we add code to autodetect it. The hostFactor should still be used to specify the conversion factor between the host performance and that of the simulated system.
2013-06-11kvm: Don't handle IO and execute in the same tickAndreas Sandberg
We currently execute instructions in the guest and then handle any IO request right after we break out of the virtualized environment. This has the effect of executing IO requests in the exact same tick as the first instruction in the sequence that was just run. There seem to be cases where this simplification upsets some timing-sensitive devices. This changeset splits execute and IO (and other services) across multiple ticks. This is implemented by adding a separate RunningService state to the CPU state machine. When a VM requires service, it enters into this state and pending IO is then serviced in the future instead of immediately. The delay between getting the request and servicing it depends on the number of cycles executed in the guest, which allows other components to catch up with the CPU.
2013-06-11kvm: Maintain a local instruction counter and update totalNumInstsAndreas Sandberg
Update the system's totalNumInst counter when exiting from KVM and maintain an internal absolute instruction count instead of relying on the one from perf.
2013-06-11x86: Fix bug when copying TSC on CPU handoverAndreas Sandberg
The TSC value stored in MISCREG_TSC is actually just an offset from the current CPU cycle to the actual TSC value. Writes with side-effects to the TSC subtract the current cycle count before storing the new value, while reads add the current cycle count. When switching CPUs, the current value is copied without side-effects. This works as long as the source and the destination CPUs have the same clock frequencies. The TSC will jump, sometimes backwards, if they have different clock frequencies. Most OSes assume the TSC to be monotonic and break when this happens. This changeset makes sure that the TSC is copied with side-effects to ensure that the offset is updated to match the new CPU.
2013-06-11sim: Revert [34e3295b0e39] (sim: Fix early termination in mult...)Andreas Sandberg
HG changset 34e3295b0e39 introduced a check in the main simulation loop that discards exit events that happen at the same tick as another exit event. This was supposed to fix a problem where a simulation script got confused by multiple exit events. This obviously breaks the simulator since it can hide important simulation events, such as a simulation failure, that happen at the same time as a non-fatal simulation event.
2013-06-11cpu: Add support for scheduling multiple inst/load stop eventsAndreas Sandberg
Currently, the only way to get a CPU to stop after a fixed number of instructions/loads is to set a property on the CPU that causes a SimLoopExitEvent to be scheduled when the CPU is constructed. This is clearly not ideal in cases where the simulation script wants the CPU to stop at multiple instruction counts (e.g., SimPoint generation). This changeset adds the methods scheduleInstStop() and scheduleLoadStop() to the BaseCPU. These methods are exported to Python and are designed to be used from the simulation script. By using these methods instead of the old properties, a simulation script can schedule a stop at any point during simulation or schedule multiple stops. The number of instructions specified when scheduling a stop is relative to the current point of execution.
2013-06-10stats: updates due to changes to rubyNilay Vaish
Ruby's controller statistics have been mostly moved to stats.txt now. Plus stats.txt for solaris/t1000-simple-atomic and arm/20.parser are also being updated.
2013-06-09ruby: remove several unused variables in ProfilerNilay Vaish
This patch removes per processor cycle count, histogram for filter stats, histogram for multicasts, histogram for prefetch wait, some function prototypes that do not have definitions.
2013-06-09ruby: remove periodic event from ProfilerNilay Vaish
The Profiler class does not need an event for dumping statistics periodically. This is because there is a method for dumping statistics for all the sim objects periodically. Since Ruby is a sim object, its statistics are also included.
2013-06-09ruby: stats: use gem5's stats for cache and memory controllersNilay Vaish
This moves event and transition count statistics for cache controllers to gem5's statistics. It does the same for the statistics associated with the memory controller in ruby. All the cache/directory/dma controllers individually collect the event and transition counts. A callback function, collateStats(), has been added that is invoked on the controller version 0 of each controller class. This function adds all the individual controller statistics to a vector variables. All the code for registering the statistical variables and collating them is generated by SLICC. The patch removes the files *_Profiler.{cc,hh} and *_ProfileDumper.{cc,hh} which were earlier used for collecting and dumping statistics respectively.
2013-06-09ruby: remove undefined functions in Address classNilay Vaish