summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-03systemc: Keep track of more cases when we should be ready after resume.Gabe Black
If a thread self suspends, it should be marked as ready after resuming. If a process was already ready when suspended, it should also be remarked as ready after resuming. Special care has to be taken in pre-initialization situations so that processes are put on the right lists, and whether a process is tracked is already marked as ready. Change-Id: I15da7d747db591785358d47781297468c5f9fd09 Reviewed-on: https://gem5-review.googlesource.com/c/12445 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: When sensitive to an event finder, find on all interfaces.Gabe Black
When a process is sensitive to an event finder and that finder is attached to a port which is bound to multiple interfaces, the process is supposed to be made sensitive to the event finder function's result when called on each interface, not just the first one. Change-Id: I92312e04e60fab7a7ea51c1ed687edabe9768205 Reviewed-on: https://gem5-review.googlesource.com/c/12444 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Make Process track whether it's dynamic on its own.Gabe Black
Processes which are created in end_of_elaboration aren't created with sc_spawn but still need to figure out if they're dynamic. Rather than duplicate the check in sc_spawn, this change centralizes it in the Process class itself. Change-Id: I763d5a0fa89a72fbc82346b6ce2eed852ee72524 Reviewed-on: https://gem5-review.googlesource.com/c/12443 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Track the module who's end_of_elaboration callback we're in.Gabe Black
Change-Id: Ib5fe3232cfea26df0c3396c583fd80da429cbdd5 Reviewed-on: https://gem5-review.googlesource.com/c/12442 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: sc_spawn can create static or dynamic processes.Gabe Black
Their status depends on when sc_spawn is run. Change-Id: I826adf9d5c905687e705642130ca5ad725ce92af Reviewed-on: https://gem5-review.googlesource.com/c/12441 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Improve handling of empty process handles.Gabe Black
Most had checks, but didn't print any message. throw_it needed a check as well. Change-Id: I916c837112f9b27852583f01b3e16a6f53d5e7ca Reviewed-on: https://gem5-review.googlesource.com/c/12440 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Ensure all objects and events have unique names.Gabe Black
Change-Id: I59b78048849953773b80bb2dac9b834762625331 Reviewed-on: https://gem5-review.googlesource.com/c/12439 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Make sure children of processes are recorded as such.Gabe Black
The process was treated as the parent of the object, but the object wasn't being installed as a child of the process. Change-Id: I6710f34734835cbeceb3d33e5e37b6f5897c5e30 Reviewed-on: https://gem5-review.googlesource.com/c/12438 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Clamp the time of events to the present.Gabe Black
If systemc attempts to schedule an event in the past, schedule it for right now instead. Still preserve the difference between delta and timed events. This scheme doesn't really make a lot of sense (why not just disallow scheduling events in the past?) but this will approximate what I think the correct behavior is. What's probably supposed to happen is that events in the past are executed from most past to most present until they catch up with now, and then now advances as normal. Our approach is simpler, but won't preserve ordering between multiple events scheduled in the past. Change-Id: I73c1e581c532530178458f044674613a4f4ea3be Reviewed-on: https://gem5-review.googlesource.com/c/12277 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Implement support for the default time unit.Gabe Black
This is deprecated, but still used in the tests. Change-Id: I454540e419c53624a37f3d1271cb240415b816b6 Reviewed-on: https://gem5-review.googlesource.com/c/12276 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-03systemc: Implement most of sc_fifo and its interfaces.Gabe Black
There are still some bugs since the output of the tests don't all match, but more tests pass and fewer abort. Change-Id: I37f84d65c4a8a43357c98282096e39b9401fc1dd Reviewed-on: https://gem5-review.googlesource.com/c/12275 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-02sim-se: Set ArmProcess64 hwcaps depending on ID regsGiacomo Travaglini
ArmProcess64 needs to query AArch64 ID registers to check which hw capability is going to report in the appropriate aux vector's entry. Change-Id: I1e1294b831e902226f9b162f25e841e53b940454 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/13164 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-10-02sim-se: Different HWCAP for ArmProcess32/64Giacomo Travaglini
AArch32 and AArch64 have different HWCAP flags in Linux, but we are currently using AArch32 HWCAP flags to initialize the aux vector of both AArch32 and AArch64 binaries. This patch also fixes a bug that was introduced by running in SE mode a target binary compiled with glibc > 2.18. Using AArch32 flags resulted on CPUID flag being set for AArch64. This incorrectly tells libc that emulation of the midr_el1 is supported. In FullSystem this might work, but since we are in Syscall Emulation there is no OS behind emulating the mrs midr_el1 instruction. By separating AArch32 flags from AArch64 flags we are turning off the CPUID hwcap flag in SE mode. Change-Id: I9f651957ba9d19dc2bc06606de070c6586f0f9fa Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/12884 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-10-02arch-arm: Add FP16 support introduced by Armv8.2-AEdmund Grimley Evans
This changeset adds support for FP/SIMD instructions with half-precision floating-point operands. Change-Id: I4957f111c9c5e5d6a3747fe9d169d394d642fee8 Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13084 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-02arch: Fix unserialization of VectorReg valueGabor Dozsa
Change-Id: Iba01ae60e10703877eae299ba924fa1f04a4a387 Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13104 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-02arch-arm: Add FP16 support and other primitives to fplibEdmund Grimley Evans
This changeset: - extends fplib to support emulation of half-precision floating-point (FP16) operations; - extends fplib to support additional primitives introduced by the Arm Scalable Vector Extension (SVE) (fplibExpa, fplibScale, fplibTrigMAdd, fplibTrigSMul, fplibTrigSSel); - adds the FZ16 bit to FPSCR; - cleans up fplib code by replacing constants with preprocessor macros and by adding inline functions to recognise NaNs and infinities. Change-Id: If8fdb2a5824b478c8310bbc126ec60cc1105f135 Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13044 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01arch-arm: Implement AArch64 ID regs as bitunionsGiacomo Travaglini
This patch is implementing the following AArch64 ID registers as bitunions, so that it is easier to query for feature availability: - ID_AA64DFR0_EL1 - ID_AA64ISAR0_EL1 - ID_AA64ISAR1_EL1 - ID_AA64MMFR1_EL1 - ID_AA64MMFR2_EL1 - ID_AA64PFR0_EL1 They are updated to the latest Armv8.5 arch release version. RES0 only ID registers like ID_AA64AFR1_EL1 haven't been added. Change-Id: Ied037abe3757421bcfc2834d397a8cf9a2b9f0a7 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13067 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01arch-arm: Implement AArch64 ID_AA64MMFR2_EL1 registerGiacomo Travaglini
This patch implements AArch64 Memory Model Feature Register 2 (from ARMv8.2) Change-Id: I16d9acaf620fac6d1206e208bd143daec1657daf Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13066 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01arch-arm: Move MiscReg BitUnions into a separate header fileGiacomo Travaglini
As the number of MiscRegs increases there is the need of a cleaner header file; this patch is separating miscreg.[cc,hh] where the miscreg decoding/utility functions are defined/declared from the MiscReg register types (BitUnion). Change-Id: I815f53b117b50e47f93aa13d78356ef09d2a2541 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13065 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01arch-arm: Init AArch64 ID registers in SE modeGiacomo Travaglini
One of the auxv vector's flag is the HWCAP, whose bits match the content of several arm ID registers. This patch factors out AArch64 ID registers init into a separate method and creates the symmetric AArch32 ID register init as well, so that we get a meaningful auxiliary vector in SE mode. Change-Id: I52bdb31b67508c4447558ebd7ca743733a69280e Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13064 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01cpu: Fix typo in header guard for Noncaching cpuGiacomo Travaglini
Change-Id: If8ec5f5f49e99d4989658273723b943dd8df84c6 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/13144 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Enable FIQ signaling for Group0 interrupts in GICv2Giacomo Travaglini
Change-Id: Iafaf26344a26eade60c08dd2c0d716af14d9b328 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12948 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Create postFiq events for GICv2Giacomo Travaglini
GICv2 is signaling IRQs only to the CPU. This patch is adding the capability of scheduling FIQs. Change-Id: I395afc83eb8d58cfd32cd93372bcb6f804364ef5 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12947 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Implement GICv2 GICD_IGROUPR registerGiacomo Travaglini
This patch is implementing GICD_IGROUPR register. Change-Id: I1626f61fbf7deec9c81d8d2c135f1d6c0c4eb891 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12946 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Fix GICv2 cpu interrupt enable flagGiacomo Travaglini
Read/WriteCpu methods in the GICv2 are accessing the GICC_CTRL register as if writing any non-zero value to the register will enable IRQ signaling to the CPU. Instead, only the 2 least significant bits control group0/group1 enablement. This patch is renaming GICC_CTRL underlying data buffer from cpuEnabled to cpuControl and it is making it an array of uint32_t instead of bool. cpuEnabled now becomes a method and checks if GICC_CTRL.EnableGrp0 or GICC_CTRL.EnableGrp0 are set. Change-Id: I40f0b3c52c40abd482a856f032bf3686f96ef641 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12945 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Add basic support for level sensitive SPIs in GICv2Adrien Pesle
For level sensitive interrupt IRQ line must be cleared when interrupt is deasserted. This is not the case for edge-trigerred interrupt. Change-Id: Ib1660da74a296750c0eb9e20878d4ee64bd23130 Reviewed-on: https://gem5-review.googlesource.com/12944 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01sim: Extend (UN)SERIALIZE_ARRAY to BitUnionsGiacomo Travaglini
This patch is making it possible to use SERIALIZE_ARRAY and UNSERIALIZE array for serializing arrays of BitUnions. Change-Id: I682766b472585f70a89338f373fb94dff5db53c3 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12924 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-28dev-arm: Make CpuLocalTimer use standard ArmInterruptPinGiacomo Travaglini
Change-Id: I8c4eb9389b47df8cdf1eec966bb2c9da85a7a7c8 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12744 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-28dev-arm: Take into account PPI enable bitGiacomo Travaglini
When checking for PPIs to send to the cpu in the PL390 GIC we were forwarding any pending PPI regardless of their masking in the distributor. Change-Id: I2e294abeca733cca95cd0deeb9659c7d3d9d8734 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12624 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-28arch-arm: raise/clear IRQ when writing to PMOVSCLR/SETGiacomo Travaglini
Writing a 1 to the Overflow Flag Status register should trigger an interrupt raise/clear depending on the register we are currently using (PMOVSCLR for clearing and PMOVSSET for raising). Change-Id: I2091456685a245712045cf7a4932ac36b7dded1d Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12531 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-26util: Do not use $(PWD) in MakefilesKevin Brodsky
644e8cdf5ee7 ("util: Move the m5ops.h file to a shared directory") added include/ to the include path for m5 Makefiles, based on $(PWD): $(PWD)/../../include. Unfortunately, this breaks when using `make -C <path>`, as -C does not move PWD accordingly. The fix is simply to remove $(PWD), as a relative path is just fine here. Change-Id: Ia046c29761363b6670e52c52a604c7e70a6a305a Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12844 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-09-26systemc: Report errors when proc ctrl funcs are called during elab.Gabe Black
Change-Id: I19475b86d04af5b3e4e907d9e24cb15666fb7bb1 Reviewed-on: https://gem5-review.googlesource.com/12274 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Abort verify.py if no tests were selected.Gabe Black
The various phases assume there are at least some tests, and if there are none they may try to run malformed commands. Change-Id: I041d35c504da57b830c490651ab1b3c98e0288ca Reviewed-on: https://gem5-review.googlesource.com/12273 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Make verify.py run the tests from the directory they expect.Gabe Black
Change-Id: I4c902cd81f7e46f81f601cae0ff2da044ef48f85 Reviewed-on: https://gem5-review.googlesource.com/12272 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Add a --working-dir option to the test config.py.Gabe Black
The tests expect to be run from a certain directory. Generally that doesn't matter, but in at least one case the test opens a file with a relative path, and that doesn't work unless CWD is what it expects. Change-Id: I34c0ed975e77daed50ace4f7eebd034bf04c5595 Reviewed-on: https://gem5-review.googlesource.com/12271 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Change the test binaries to use rpath.Gabe Black
Use rpath to link the gem5 dynamic library into the systemc test binaries so that they don't have to be run from a particular directory to resolve all their linking dependencies. Change-Id: I66b18c23ae6bbf32a959022f8789fc8bdd3a6c6b Reviewed-on: https://gem5-review.googlesource.com/12270 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Handle sc_stop called from sc_main correctly.Gabe Black
When in sc_main, sc_is_running will return true but we're not going to run any gem5 events since we're currently in the sc_main Fiber. In that case, we need to do the sc_stop work inline. If we're actually running and not just paused, then we do still want to schedule the work of sc_stop to happen as its own event since that will happen before returning to sc_main, and actually will likely be the mechanism by which sc_main starts executing again. Change-Id: If9ffafc4f240af0f3d9c726b36a0950b5219dc00 Reviewed-on: https://gem5-review.googlesource.com/12269 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Fix some issues with starvation checks.Gabe Black
Make sure we check for starvation after timed notifications and at the very end of delta cycles (after delta notifications, not before). Also reverse the order of starvation checks (whether they apply at all, then if they're satisfied) to make those checks faster. Checking a bool is a lot easier than checking if a bunch of other structures are empty. Change-Id: I514ff219909823f1f424fde69856d6b510655188 Reviewed-on: https://gem5-review.googlesource.com/12268 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: When sc_start-ing with zero time, ensure the ready event runs.Gabe Black
The ready event is what notices that we only wanted to run one delta cycle, or no delta cycle if there was nothing to do, and return to sc_main. If the ready event wasn't scheduled, we would advance time before the ready event ran and returned to sc_main which is incorrect. Change-Id: Ic3c10a2f1405f744e8c2bd37aa45846ee6e98e12 Reviewed-on: https://gem5-review.googlesource.com/12267 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Fix where we checked if sc_stop was called durig elaboration.Gabe Black
If sc_stop is called during one of the various callbacks, that has defined behavior and will cause the simulation to stop after the current batch of callbacks. We were checking whether sc_stop had been called during one of those batches and killing the system, erroneously assuming that meant it had called during elaboration. This change moves the check to before the callbacks which actually does mean that sc_stop was called during elaboration. Change-Id: I6876305450e52a407acffb9a2f45ee2ae24a9adf Reviewed-on: https://gem5-review.googlesource.com/12266 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Make sure methods aren't restarted by yield.Gabe Black
Methods may need to yield control to other Processes when throwing them exceptions. In that case, we need to keep track of the fact that the method doesn't need to be restarted when it resumes within yield. Change-Id: I829c387d6ddb563b2957db47e55adadbbe6bc51a Reviewed-on: https://gem5-review.googlesource.com/12265 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: When a thread completes, yield to the scheduler.Gabe Black
Don't just fall off the end of the fiber and return to gem5. By calling yield, we ensure that remaining Processes are run and that bookkeeping is maintained correctly. Change-Id: Ifbe104e155cad29e40a89767a7c1f986399f784d Reviewed-on: https://gem5-review.googlesource.com/12264 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Implement positional binding.Gabe Black
Change-Id: Ifbcd7e4148b82b9bf5241e040e812925daea3705 Reviewed-on: https://gem5-review.googlesource.com/12263 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Use sc_assert to check the number of interfaces.Gabe Black
The sc_port code had been using the .at() function of the vector class, but when that failed it threw an exception, and it was very difficult to tell where the exception came from from how gem5 crashed. This change switches to sc_assert (the systemc version of assert) which makes the cause/location of failures much more obvious. Change-Id: I1cd51c86f47b314be551c304b014c44cfa030175 Reviewed-on: https://gem5-review.googlesource.com/12262 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Get rid of the unused warning function in sc_event_finder_t.Gabe Black
Change-Id: Id615856af7ea366e499747e00f66924a25623663 Reviewed-on: https://gem5-review.googlesource.com/12261 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Use the eq pointer directly less often in the scheduler.Gabe Black
This takes advantage of the utility functions that exist a little better, and also avoids accidentally asymetrically using eventsToSchedule and eq->(de)schedule. Change-Id: I1eb1c228d47684cccb9deaf6f3409b77cfbad4cd Reviewed-on: https://gem5-review.googlesource.com/12260 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-26systemc: Make sc_process_b less hokey, and make WAIT* work.Gabe Black
This change puts sc_process_b into the inheritance hierarchy for the Process types. It also adds the nonstandard sc_set_location function and calls it from the nonstandard WAIT* macros. Change-Id: Ic997dcf74d262774dd7b53504146e372e03af2e0 Reviewed-on: https://gem5-review.googlesource.com/12259 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-25systemc: Handle null and omitted event names.Gabe Black
If the simulation isn't running, these should be replaced with versions generated by sc_gen_unique_name(). Change-Id: Idd515e73ba17d3dfa866ee5509369e9c4e3fb2f5 Reviewed-on: https://gem5-review.googlesource.com/12258 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-25systemc: Handle null sc_object names.Gabe Black
A null pointer for an sc_object name is supposed to be equivalent to an empty string. Change-Id: I6094577ad43f13d47a20bc67fa15f4c04d448fe5 Reviewed-on: https://gem5-review.googlesource.com/12257 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-25systemc: Check for time overflow in sc_start.Gabe Black
A regression tests checks this situation. Change-Id: I7716bf7c8cf219c372ab9722fc0ad52e7e674b17 Reviewed-on: https://gem5-review.googlesource.com/12256 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-29 09:26:44 +0000