| Age | Commit message (Collapse) | Author |
|---|
|
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The aarch64 boot loader was distributed using a BSD license that was
using non-standard formatting. Updated the license to match gem5's
canonical license format and removed the separete LICENSE.txt file.
Change-Id: I660b73ca5ddd922763a2b72051c73d539248ebcf
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5728
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Added a check to avoid unlocking/locking the same event queue. Also,
added an optional parameter to enable the migration to be skipped. This
can be useful to disable the synchronization for certain runtime
conditions.
Change-Id: I4b03b3ffff4f9503153cd41dd8aa78705bf16cc4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5730
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This change adds a script to generate graphs from the stats file
output by the configuration script low_power_sweep.py.
The graphs show stacked bars for time spent and energy consumed
wherein each component of the stacked bar represents a DRAM power
state (Idle, Refresh, Active, Active Power-down, Precharge Power-down
and Self-refresh). The script generates one plot per delay value. It
also generates a pdf (--pdf option) in which the graphs are laid out
such that you can easily compare how the increasing delay and other
swept params affect the resulting energy.
Change-Id: Id80b0947bfde27e11e5505b23a3adb30f793a43f
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5727
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds two regression tests that execute the script in the
configs dir for triggering low power mode transitions. A separate
test is required for each page policy because for close-adaptive
page policy the DRAM goes into the Precharge Power-down mode while
for open-adaptive page policy it goes into the Activate Power-down
mode.
Change-Id: Iad61af23f132db046f2857cc3ef64b2bf42cf5e4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5726
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This change adds a Python script to sweep a few parameters with a
goal to trigger transitions to the low power states of the DRAM
controller.
This script is largely based on the sweep.py but is helpful to study
the impact of inter-transaction delay on the behaviour of the DRAM
in addition to typical sweep params like stride size, bank
utilization and read percent. An idle period is added as the last
traffic generator state to target hitting self-refresh.
Change-Id: I34380afffbf2de9f4e997dfe9fff5e615e077524
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5725
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch syncs the DRAMPower library of gem5 to the
external github (https://github.com/ravenrd/DRAMPower).
The version pulled in is the commit:
90d6290f802c29b3de9e10233ceee22290907ce6
from 30th Oct. 2016.
This change also modifies the DRAM Ctrl interaction with the
DRAMPower, due to changes in the lib API in the above version.
Previously multiple functions were called to prepare the power
lib before calling the function that would calculate the enery. With
the new API, these functions are encompassed inside the function to
calculate the energy and therefore should now be removed from the
DRAM controller.
The other key difference is the introduction of a new function called
calcWindowEnergy which can be useful for any system that wants
to do measurements over intervals. For gem5 DRAM ctrl that means we
now need to accumulate the window energy measurements into the total
stat.
Change-Id: I3570fff2805962e166ff2a1a3217ebf2d5a197fb
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5724
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch allows the user to specify more than one
power model for any given Clocked Object. This is
useful and some times necessary to properly model
components that have multiple power sources (or
subcomponents) but gem5 doesn't model them.
The ideal solution would be to have a DictParam
to replace the VectorParam so each model can have
a name and can be identified in the stats file.
Change-Id: I4080a7054a16b56069c44750a7a9ce4e674cdf9d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5733
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When ignoring writes to the Dummy ISA device (DummyISADevice),
additionally print the value being ignored in the diagnostic.
Sometimes it is useful to know exactly what we are dropping ...
Change-Id: I9a01623611f0da0aa12b065fbb2031aa27e2c036
Signed-off-by: Sean McGoogan <Sean.McGoogan@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5731
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I5bbf36ef21ac14d9edf68ec6766d33f88e84d308
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5729
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
There are cases where it is desirable to load a kernel and a set of
additional objects. This can, for example, be useful for testing where
the bootstrap code can be loaded from one object (the kernel) and the
test proper from another.
This changeset adds this functionality by adding a kernel_extras
vector parameter to the System class. Object files in this vector are
loaded in order after the kernel when running in full system mode.
Change-Id: I06f57c6a65a17b02eb4267bed0aa829f21bcfa3b
Reviewed-on: https://gem5-review.googlesource.com/5703
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
DSB Instruction shouldn't flush the pipeline, hence the IsSquashAfter
attribute will be removed for either the 32 and 64 bit version.
Change-Id: I98b2b8bc78aa28445ed1a9b5f34645f8d71616ad
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5363
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Writes to DCCMVAC (Data Cache line Clean by VA to PoC) system register
shouldn't flush the pipeline as a result of the operation. This addition
was wrongly introduced for supporting self-modifying code. Software
barriers should be used instead.
Change-Id: Idf0c27d2e49ca01be19888ae5523b8f8eaefa7b3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5362
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This Patch is removing the FlushPipe ArmFault, which was used for
flushing the pipeline in favour of the general IsSquashAfter StaticInstr
flag. Using a fault was preventing tracers from tracing barriers like
ISB and from adding them to the instruction count
Change-Id: I176e9254eca904694f2f611eb486c55e50ec61ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5361
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch introduces the ARM A32/T32/A64 CRC Instructions, which are
mandatory since ARMv8.1. The UNPREDICTABLE behaviours are implemented as
follows:
1) CRC32(C)X (64 bit) instructions are decoded as Undefined in Aarch32
2) The instructions support predication in Aarch32
3) Using R15(PC) as source/dest operand is permitted in Aarch32
Change-Id: Iaf29b05874e1370c7615da79a07f111ded17b6cc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5521
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Simplify the patch creation helper script by removing support for
automatic conversion to Mercurial's patch format. We no longer use
Mercurial as a primary repository, so this support is not likely to be
needed again.
Change-Id: I83f6efb9ccaee9c548b33257a4d6128153750c76
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5162
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The helper script to list changes currently only looks at the changes
between a branch point and two heads. This helps performance, but
sometimes misclassifies changes that exist both in the upstream
branch before the branch point and in a feature branch. Such changes
should normally not exist, but can be the product of an incorrect
rebase.
This change adds an option to the helper script to search the entire
upstream repo history when determining the set of upstream
changes. When this option is provided, the script lists the changes
that exist upstream before the branch point and in the feature branch
as "Incorrectly rebased changes".
Change-Id: I4cb72cea2152c49d0317dc43613be94a0a2de1e5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5161
|
|
Change-Id: I017852eac183fac3f914fdb96d7e72a56ea9d682
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5121
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This particular functor looks in the config root, not in the path
specified by M5_ROOT like binary and disk.
Change-Id: Ib007c36934c65ca9f808e995a2e0c71f0b338788
Reviewed-on: https://gem5-review.googlesource.com/5641
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This type expects values in joules (J).
Change-Id: I77a3a4f1c19443f573d5fe7a84d5abd954ce1603
Reviewed-on: https://gem5-review.googlesource.com/5625
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This type was defined, but it was never added to __all__.
Change-Id: I5414829a9562790416f5ceab71af01503d142903
Reviewed-on: https://gem5-review.googlesource.com/5624
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I7299af0e2a6ce9bd2272d6ccb898997336e95e51
Reviewed-on: https://gem5-review.googlesource.com/5623
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
These had a lot of code which duplicated what was already in the
Float param value class. Also, printing into the ini file with "%f"
forces python to truncate values which require more precision than the
fixed float format supports.
Change-Id: Iad9623b71a31d17b69c184082585dcbb881eaa20
Reviewed-on: https://gem5-review.googlesource.com/5622
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8 Tracers might want to be able to read the intWidth field of the
ArmStaticInst object. The field is specifying the bit width of the
integer registers used by the current instruction.
Change-Id: Iaee3123823a2c7380917001c453377c1c12e54a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch corrects the encoding of the HVC (Hypervisor Call) for the
T32 instruction set.
Change-Id: I6f77eaf5c586697e9ccd588419c61e6d90c6c7bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5541
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The python conversion module was really repetitive and fragmented,
where some types of conversions use common code, and some use hand
written case statements which did something very similar. Also, some
types like Voltage could only handle V and mV but no other scaling
prefix.
This change restructures the module to centralize a lot of the unit
handling code into toFloat, and makes the various other functions use
it.
Change-Id: Ic8529203cc226c9b551b8535a444e3f2f25ad1eb
Reviewed-on: https://gem5-review.googlesource.com/5621
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ica08e93f3873a7eafd02fe7d44c3bdbf0ce7f6b7
Reviewed-on: https://gem5-review.googlesource.com/5565
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Make site_init.py manage sys.path, and the "default" tool set
PYTHONPATH on any environment that's created. The paths to add are
tracked in a common gem5_python_paths.py.
Change-Id: I3387d4394d47a2f9c83322644cfd05909c6890fa
Reviewed-on: https://gem5-review.googlesource.com/5564
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Put the code which supports style hooks for mercurial and git into two
scons "tools".
Change-Id: I3ffed85a177be4f9e458fff7b1cf16a3a479914e
Reviewed-on: https://gem5-review.googlesource.com/5563
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This imports various environment variables into the scons environment,
and sets some general properties on it. These are basically just copied
directly from the SConstruct and have the same behavior here.
gem5_tool_list will be used later on to add scons "tools" which should
be automatically added to new Environment objects.
Change-Id: Ib255955090c7b1e1cb80c703c18a9c867fcf1c9e
Reviewed-on: https://gem5-review.googlesource.com/5562
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
In an effort to shrink and modularize the main scons files, this
change pulls the scons and python version checking code out of the
main file and into site_init.py which runs before the SConstruct
starts. This will be a place to put really generic code which has to
do with the very fundemental aspects of getting scons to work. Other
checks, like checks for particular tools or particular versions of
tools, will happen in other more specialized files.
Change-Id: Icd00ecadbe1141aef4dbadcf42d6ddef1f3a701f
Reviewed-on: https://gem5-review.googlesource.com/5561
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
When the XBar receives a Writeback/WriteClean packet, it doesn't need
to snoop the upstream caches. It only queries the snoop filter and
sets the blockCached flag accordingly. This is in line with the
recvTimingReq.
Change-Id: I0ae22f21491d75a111019124bb95bac7b16d3cd3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5043
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
A program running in EL0 is allowed to execute CMOs when the UCI bit
in SCTLR is set. The execution of dc ivac, however, would fault
uncoditionally when executed from EL0. This change aligns the
permission checks for dc ivac with the rest of the CMOs.
Change-Id: I1a532f37707c7dc0748b4375252c6ec0bbf95419
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5058
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Add a dummy serial device that discards any output and doesn't provide
any input. This device can be used to terminate UARTs that don't have
a default device (e.g., a terminal) attached.
Change-Id: I4a6b0b5037ce360f59bfb5c566e1698d113a1d26
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4290
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.
Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.
Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Some ISAs (namely RISC-V) implement getrlimit and setrlimit using
prlimit. This patch adds an implementation for the prlimit system call.
Normally prlimit is supposed to provide the functionality of both
getrlimit and setrlimit, but because gem5 does not support setrlimit
this implementation of prlimit will simply display a warning and return
a failure code if the setrlimit mode is used. The same thing will happen
if a pid other than 0 is passed to it.
Change-Id: I653af2d5a60e716f4d6286196be7600409efcef8
Reviewed-on: https://gem5-review.googlesource.com/5321
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.
Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.
Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
These functions were already being treated as psuedo objects and had
properties assigned to them setting what their paths were. That's a bit
unusual and made it less obvious what the code was doing, but also
forced the "system" function to know what all the possible path
searching functions were so that they'd have their "path" property
initialized properly in a central location.
This change introduces a PathSearcFunc class which encapsulates the
mechanisms of the old code and makes it implicitly extensible so that
other path searching functions which might look in other directories
can be added in other places.
Change-Id: I7be28e51481a06ec83997677af99927709b18003
Reviewed-on: https://gem5-review.googlesource.com/5341
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device. Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.
Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This commit modifies the default behaviour of the vnc frame dumping
process: rather than using 'Bitmap' as a default parameter value, it is
using 'Auto'. Auto parameter is letting gem5 to choose the most
efficient image format among the available ones.
Change-Id: I3c8e2b5a34a5925d24892880ac362dfe38de36e3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5182
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Originally it was possible to use a Bitmap writer class for dumping a
framebuffer snapshot in a .bmp file. This patch enables you to choose
another format. In particular it implements the writing of PNG Images
using libpng library. The latter has to be already installed in your
machine, otherwise gem5 will default to the Bitmap format. This
configurable writer has been introduced in the VNC frame dumping mechanism,
which is storing changed frame buffers from the VNC server
Change-Id: Id7e5763c82235f1ce90381c8486b85a7cce734ce
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5181
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When decoding VEX prefixed instructions, the x86 predecoder wasn't walking
past the opcode byte and so was also interpreting it as the modRM byte.
Reported-by: likunxi@fas.harvard.edu
Change-Id: I6d4bdabfa03411704c48d905c50c7b23072fc615
Reviewed-on: https://gem5-review.googlesource.com/5281
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Despite online documentation, the type used for sin_addr.s_addr is not
actually an unsigned long, it is an in_addr_t. When an unsigned long is a 64
bit value, the endian conversion moves the relevant bits of the 32 bit
in_addr_t to positions which are truncated away. This forces the value to 0
which means to bind to any interface, the opposite of the intended effect.
Change-Id: I53c63dea6bd88144dfef1a9a49b478fab30a8ba2
Reviewed-on: https://gem5-review.googlesource.com/5301
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The high speed bit-reversing function is now used
for the Aarch64/32 RBIT instruction implementation.
Change-Id: Id5a8a93d928d00fd33ec4061fbb586b8420a1c1b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5262
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch introduces a high-speed template function for mirroring the
bits (MSB=>LSB) in a variable length word. The function is achieving
high performances since it is using a look-up table.
Change-Id: Ib0d0480e68d902f25655f74d243de305103eff75
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5261
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
std::make_unique is not available for C++11 compilers, and it has been
introduced only in C++14. Since gem5 is not officially supporting the
latter at the moment, this patch allows to use it in gem5 if including
base/compiler.hh. If compiled under C++14, std::make_unique will be
used instead.
Change-Id: Ibf1897fad0a1eb1cb0c683cc25170feaa6841997
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5201
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Fixes compile error for gem5.fast on CLANG due to unused variable.
Change-Id: Iabe777a27d75ee8bfa7b214fff577aed3c7582c7
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4980
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
A recent scons cleanup introduced a small bug when setting the variant path of
the regression test SConscript. When turned into a relative path, the
directory can be interpreted differently depending on what it's considered
relative to. When left as a scons node, there is no ambiguity.
Change-Id: I162afdc4fcef81db096ec8304f81bc98fa6bf899
Reviewed-on: https://gem5-review.googlesource.com/5221
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
