summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-10alpha,arm,mips,power,riscv,sparc,x86,cpu: Get rid of ISA_HAS_DELAY_SLOT.Gabe Black
This constant is, first, a #define, and second only used in one place. In that one place, it appears that the code it guards is no longer necessary in general. It was originally written to avoid refetching a block of data that you're still in, even if you've moved slightly farther in it because you're skipping the next instruction due to an annulled branch delay slot. In reality however, in SPARC, the one ISA I'm aware of which has this sort of branching behavior, the PC state object will correctly determine that no branch is happening in these cases. Code lower down in the loop will then recompute where fetching should continue based on the next PC, automatically skipping the annulled branch slot without misinterpretting the gap as a branch. This change therefore also removes this block of code. Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c Reviewed-on: https://gem5-review.googlesource.com/6821 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-10arch-riscv,sim: Support clone syscall in RISC-VTuan Ta
(1) This patch sets a correct order of clone syscall's arguments for RISC-V. Linux kernel 4.15 uses CLONE_BACKWARDS flag by default for RISC-V. The flag in the Linux kernel defines the list of clone syscall's arguments in the following order: clone_flags (flags) newsp (newStack) parent_tidptr (ptidPtr) tls (tlsPtr) child_tidptr (ctidPtr) Code reference: https://github.com/riscv/riscv-linux/blob/master/kernel/fork.c https://github.com/riscv/riscv-linux/blob/master/arch/riscv/Kconfig (2) This patch copies a parent thread's register values to its child thread in clone syscall. Change-Id: I2eb1c8e80990861080ce7153503ed784fb2c7bdf Reviewed-on: https://gem5-review.googlesource.com/6904 Maintainer: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
2018-01-09mem-cache: Prune unnecessary writebacks in exclusive cachesNikos Nikoleris
Exclusive caches use the tempBlock to fill for responses from a downstream cache. The reason for this is that they only pass the block to the cache above without keeping a copy. When all requests are serviced the block is immediately invalidated unless it is dirty, in which case it has to be written back to the memory below. To avoid unnecessary writebacks, this changeset forces mostly exclusive caches to issuse requests that can only fetch clean data when possible. Reported-by: Quereshi Muhammad Avais <avais@kaist.ac.kr> Change-Id: I01b377563f5aa3e12d22f425a04db7c023071849 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-01-09util: Add the missing wakecpu m5op in X86.Hanhwi Jang
Change-Id: I74876a4638ad37308ecdb0ef68513a968fac8787 Reviewed-on: https://gem5-review.googlesource.com/6501 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-09util: resolve m5op name mismatching in m5op headers.Hanhwi Jang
Two m5op, load_symbol and dist_toggle_sync are defined with different name in C and asm version headers 'm5ops.h' The m5ops are named to m5_load_symbol() and m5_dist_toggle_sync(). Change-Id: I9630d74f3fb95bc3dc5fa082778d8f6eaa49b3cb Reviewed-on: https://gem5-review.googlesource.com/6481 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-09cpu: Use the NotAnInst flag to avoid passing an inst to fetch faults.Gabe Black
When a fault happens in fetch in O3, a dummy inst is created to carry the fault through the pipeline to commit, but conceptually there isn't actually any instruction since we failed to fetch one. This change marks the dummy instruction as NotAnInst, and when any such instruction gets to commit, the fault object associated with it is invoked and passed a null static inst pointer instead of a pointer to the dummy inst. Change-Id: I18d993083406deb625402e06af4ba0d4772ca5a3 Reviewed-on: https://gem5-review.googlesource.com/7124 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-09cpu: Add a NotAnInst flag to the BaseDynInst class.Gabe Black
This flag means that the instruction isn't an actual instruction, it's just a placeholder to carry a fault down a pipeline, for instance. Change-Id: I1cc12b068662dbd3d3b089c9941a07b6e88b57e3 Reviewed-on: https://gem5-review.googlesource.com/7123 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-09cpu, power: Get rid of the remnants of the EA computation insts.Gabe Black
Get rid of some remnants of a system which was intended to separate address computation into its own instruction object. Change-Id: I23f9ffd70fcb89a8ea5bbb934507fb00da9a0b7f Reviewed-on: https://gem5-review.googlesource.com/7122 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-09arm: Make translateFunctional override the base implementation.Gabe Black
Now that translateFunctional is a virtual function, having an extra parameter with a default value makes the compiler fall through to the base implementation instead of overriding it. This change removes the default value for the extra parameter, and adds a small wrapper with the correct signature which overrides the base implementation and calls the full version with the previously default value for the extra parameter. To callers this will look like the same thing, but the the right function will get called. This was what was already being done for transateAtomic and translateTiming. Change-Id: I0b71adf34fd6f326005edbb8eaac93275b437c55 Reviewed-on: https://gem5-review.googlesource.com/7121 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-08gpu-compute: call createThreads() on cpu objs in apu_se.pyTony Gutierrez
commit 8ad26e2688b8736f9290086bb4026cc7500429e9 cpu: Don't override ISA if provided by user removed the default ISA from the BaseCPU, and instead relies on createThreads() to initiate a default ISA if none is specified. the apu_se.py script, however does not call creatThreads() leading to a fatal when constructing CPU objects. this patch adds the appropriate calls to createThreads() inside apu_se.py. Change-Id: I16a5929454c59d68a3f1b7b3858c48a70cb76412 Reviewed-on: https://gem5-review.googlesource.com/7101 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-01-05arch-riscv: Ignore sched_yield syscall in SE modeTuan Ta
Change-Id: I14f22c06eb8fdbe063980b4cd0a49387b9113a97 Reviewed-on: https://gem5-review.googlesource.com/6961 Maintainer: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
2018-01-05sim: Fix a bug in prlimit syscall in SE modeTuan Ta
The old_limit pointer is supposed to be the 4th argument (index 3) of the prlimit syscall. This patch sets old_limit pointer to the correct argument. Change-Id: I97808f7234cd2622cb3eb2f1e0beb7fc8cf492c1 Reviewed-on: https://gem5-review.googlesource.com/6903 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-01-05arch-riscv: Ignore set_robust_list and get_robust_list syscallsTuan Ta
Change-Id: I5a4744e5aed07337144af9f07978b83405b6695b Reviewed-on: https://gem5-review.googlesource.com/6902 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-05arch-riscv: Add an implementation of set_tid_address syscall in RISCVTuan Ta
Change-Id: Ida29ea6f6a9c3efe00aaebbfcb6b537fc62f6d06 Reviewed-on: https://gem5-review.googlesource.com/6901 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-05arch-riscv: Correct syscall argument reg countAlec Roelke
As per the discussion in patch #6904 and the Linux 4.15 kernel code for RISC-V, RISC-V has 7 system call argument registers, x10 through x16 (a0 through a6), with x17 (a7) being used for the system call number. Change-Id: I0080eca78ffa844b322bb2cff2a51ab2815f3809 Reviewed-on: https://gem5-review.googlesource.com/7081 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tuan Ta <qtt2@cornell.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-04arch-riscv: Remove "magic" syscall number constantAlec Roelke
getSyscallArg() in RISC-V has an explicit check to make sure that the register index is within the bounds of the system call register indices vector. This patch fixes it so that it uses SyscallArgumentRegs.size() rather than a "magic" constant that has to be updated every time SyscallArgumentRegs is changed. Change-Id: I2935d811177dc8028cb3df64b250ba997bc970d8 Reviewed-on: https://gem5-review.googlesource.com/7061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-02config: Handle NULL simobject parameters in read_config.py.Gabe Black
Change-Id: If0f87e8ee37099be4d0f3567db4fc34f8467e409 Reviewed-on: https://gem5-review.googlesource.com/6943 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-02config: Fix parsing AddrRange parameters in read_config.py.Gabe Black
The format of AddrRange parameters was changed, but config/example/read_config.py wasn't updated for the new format. Change-Id: Ie0da7aaa47c827bacc2b4f7f44929efd868b8794 Reviewed-on: https://gem5-review.googlesource.com/6942 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-02config: Add a --checkpoint-dir argument to read_config.py.Gabe Black
This argument lets the user restore a checkpoint after loading simulator state from config.ini. Change-Id: I6e0630d75b798a1d2536e2408660843f57f46c4b Reviewed-on: https://gem5-review.googlesource.com/6941 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-12-23alpha,arm,mips,power,riscv,sparc,x86: Get rid of TheISA::NoopMachInst.Gabe Black
It's no longer used. Change-Id: I4a71bcb214f1bb186b92ef50841eca635e6701c5 Reviewed-on: https://gem5-review.googlesource.com/6826 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-23riscv,x86: Stop using the arch Nop machine instruction unnecessarily.Gabe Black
That particular ExtMachInst is a convenient placeholder, but a value of 0 in RISCV or a static uninitialized ExtMachInst (which will therefore be all zeroes) on x86 works just as well, and removes the need for an ISA specific constant. Also, the idea of a universal Nop doesn't always make sense since it could be that what, exactly, doesn't do anything depends on context which would be lost on a constant value of an ExtMachInst. For instance, the value of an ExtMachInst that makes sense might depend on what mode the CPU was in, etc. Change-Id: I1f1a43a5c607a667e11b79bcf6e059e4f7141b3f Reviewed-on: https://gem5-review.googlesource.com/6825 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-22arch,cpu: "virtualize" the TLB interface.Gabe Black
CPUs have historically instantiated the architecture specific version of the TLBs to avoid a virtual function call, making them a little bit more dependent on what the current ISA is. Some simple performance measurement, the x86 twolf regression on the atomic CPU, shows that there isn't actually any performance benefit, and if anything the simulator goes slightly faster (although still within margin of error) when the TLB functions are virtual. This change switches everything outside of the architectures themselves to use the generic BaseTLB type, and then inside the ISA for them to cast that to their architecture specific type to call into architecture specific interfaces. The ARM TLB needed the most adjustment since it was using non-standard translation function signatures. Specifically, they all took an extra "type" parameter which defaulted to normal, and translateTiming returned a Fault. translateTiming actually doesn't need to return a Fault because everywhere that consumed it just stored it into a structure which it then deleted(?), and the fault is stored in the Translation object when the translation is done. A little more work is needed to fully obviate the arch/tlb.hh header, so the TheISA::TLB type is still visible outside of the ISAs. Specifically, the TlbEntry type is used in the generic PageTable which lives in src/mem. Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575 Reviewed-on: https://gem5-review.googlesource.com/6921 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-22cpu: Use the generic nop static inst instead of decoding the arch version.Gabe Black
This removes a dependence on the ISA. Change-Id: I01013bc70558f0831327213912bcac11258066a6 Reviewed-on: https://gem5-review.googlesource.com/6824 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-22cpu: Add a pointer to a generic Nop StaticInst.Gabe Black
This can be used whenever generic code needs a filler instruction that doesn't do anything. Change-Id: Ib245d3e880a951e229eb315a09ecc7c47e6ae00f Reviewed-on: https://gem5-review.googlesource.com/6823 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-21arch-arm: Fixed WFE/WFI trapping behaviourGiacomo Travaglini
This patch fixes the WFx trapping behaviour by introducing the arm arm v8 pseudocode functions: checkForWFxTrap32 and checkForWFxTrap64 Change-Id: I3db0d78b5c4ad46860e6d199c2f2fc7b41842840 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6622 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-21arch-arm: Hyp routed undef fault need to change its syndromeGiacomo Travaglini
If undefined instruction has to be routed to EL2, the HSR register must change the HSR.EC and HSR.ISS accordingly, which means not using the EL1 exception syndrome, but the unknown reason one (EC=0, ISS=0) Change-Id: I1540c713ab545bf307c1dad3ae305de4178443f4 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6621 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-21arch-arm: Fix StaticInst encoding() methodGiacomo Travaglini
The previously introduced method was missing the machInst value to be masked. Change-Id: Ic722f7cc2abc680da1a1f19c08299338b5c859a6 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Chuan Zhu <chuan.zhu@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6881 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-20cpu: Fix exit_gen.cc which used misc.hh instead of logging.hh.Gabe Black
Change-Id: I868021a01eb3e7902a4d64283bdfaa93c6d9f964 Reviewed-on: https://gem5-review.googlesource.com/6822 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-19arch-arm: Instruction size methods in StaticInst classGiacomo Travaglini
This patch is introducing some methods in StaticInst so that is possible to get the instruction size in byte of the instruction (can be 2 bytes in Thumb) and the correct opcode (The machInst field contains some appended metadata) Change-Id: I3bed4d9fd7c77feaeded40ded192afe445d306ea Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6781 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-19arch-arm: Change casting type from reinterpret to staticGiacomo Travaglini
Cosmetic fix: prefer static_cast rather than reinterpret_cast in hierarchy. Change-Id: Ic0e5a4df9b18072a6df5ee316f674241074c349a Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6761 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-19cpu-tester: Added ExitGen to TrafficGenRiken Gohil
Added the ExitGen to the TrafficGenerator which allows an EXIT state to be added to the TrafficGen configuration file. Entering this state will cause the simulation to exit immediately. Please note that if multiple TrafficGen instances have an EXIT state, the first of these to be encountered will cause the simulation to terminate. Change-Id: Ieea51f05ffb780771f007787a2b119f79143d0c1 Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5723 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-19cpu-tester: Refactoring traffic generators into separate files.Riken Gohil
Change-Id: I2372a0a88e276dcb0c06c3d0a789e010cfba8013 Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5722 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-15mem-ruby: Support atomic_noncaching acceses in rubySwapnil Haria
Ruby has no support for atomic_noncaching accesses, which prevents using it with kvm-cpu. This patch fixes this by directly forwarding atomic requests from the ruby port/sequencer to the corresponding directory based on the destination address of the packet. Change-Id: I0b4928bfda44fd9e5e48583c51d1ea422800da2d Reviewed-on: https://gem5-review.googlesource.com/5601 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
2017-12-14arch-riscv: Define AT_RANDOM properlyAlec Roelke
According to the getauxval(3) man page, the AT_RANDOM aux value should be a pointer to 16 random bytes. In the initial implementation of RISC-V, this was based on spike's program stack setup, which copied the program header table there instead. This patch changes the implementation to use the proper 16 random bytes, making it compatible with some RISC-V programs that use custom linker scripts. Change-Id: Idaae7f19bf3ed3fd06d293e5e9c0b6f778270eb2 Reviewed-on: https://gem5-review.googlesource.com/6681 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-14arch-riscv: Increase maximum stack sizeAlec Roelke
This patch increases the maximum stack size of RISC-V, which should help to reduce problems with programs that allocate large amounts of data on the stack or do many small allocations. Change-Id: I1d760050229b12f01a4a8f24c047b587299fef6d Reviewed-on: https://gem5-review.googlesource.com/6661 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-14misc: Updates for gcc7.2 for x86Jason Lowe-Power
GCC 7.2 is much stricter than previous GCC versions. The following changes are needed: * There is now a warning if there is an implicit fallthrough between two case statments. C++17 adds the [[fallthrough]]; declaration. However, to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH. M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and if that doesn't exist, it defaults to nothing (no older compilers generate warnings). * The above resulted in a couple of bugs that were found. This is noted in the review request on gerrit. * throw() for dynamic exception specification is deprecated * There were a couple of new uninitialized variable warnings * Can no longer perform bitwise operations on a bool. * Must now include <functional> for std::function * Compiler bug for void* lambda. Changed to auto as work around. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878 Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5802 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-12-14ext: Upgrade PyBind11 to version 2.2.1Jason Lowe-Power
This upgrade is necessary for pybind to build with GCC 7.2. We still need to add the patch for stl.h. MSC_FULL_VER change is no longer needed. See https://gem5-review.googlesource.com/c/public/gem5/+/2230 Change-Id: I806729217d022070583994c2dfcaa74476aef30f Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5801 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-14x86: Use operand size 4 when it would be 2 for cmpxchg8b.Gabe Black
This means the instruction is treated as cmpxchg8b when the effective operand size is 16 bits. Change-Id: I4d9bb295f96097e1746a9bbccb2c579d14738fab Reviewed-on: https://gem5-review.googlesource.com/6603 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-13scons, tests: Fix occasional linking errorAndreas Sandberg
There are some cases where scons incorrectly adds the same object multiple times to the linker command line. This seems to be caused by the test's source list being updated in place when determining test framework dependencies. Fix this by explicitly copying the source list and manipulate the copy. Without this change, the following command fails: scons ./build/ARM/unittests.opt/base/pixeltest.xml Whereas this command succeeds: scons ./build/ARM/base/pixeltest.opt Change-Id: I642efdf9d62a5478e49ba51efe1a3a5ba453e21f Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6641 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com>
2017-12-13scons, tests: Add support for GTest XML generationAndreas Sandberg
The GTest framework supports result generation in XML (JUnit). Enable this by creating unit test specific targets in the build/${BUILD_OPTS}/unittests.${VARIANT} directory. Targets in the directory use the following naming convention: ${SRC_PATH}/${TEST_NAME}.xml For example, the opt version of the bitunion test built for ARM would have this path: build/ARM/unittests.opt/base/bituniontest.xml Change-Id: I174dff16817734db05b08ce1d5bcf52e8697bbac Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6624 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-12-13scons: Make sure GTests have the right environment variablesAndreas Sandberg
SCons currently scrubs the environment variables used by GTests too aggressively. This breaks systems where libraries are installed in non-standard locations that need to be specified in LD_LIBRARY_PATH. Run said tests in the gtest_env SCons environment which white-lists the important environment variables. Change-Id: I5fc8fb5e51f09644dc976ee97b21c78ab349bf7d Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6623 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-12-13arm,sparc,x86,base,cpu,sim: Replace the Twin(32|64)_t types with.Gabe Black
Replace them with std::array<>s. Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34 Reviewed-on: https://gem5-review.googlesource.com/6602 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-13cpu,alpha,mips,power,riscv,sparc: Get rid of eaComp and memAccInst.Gabe Black
Neither of these were used, particularly memAccInst. Change-Id: I4ac9e44cf624e5de42519d586d7b699f08a2cdfc Reviewed-on: https://gem5-review.googlesource.com/6601 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-13x86: Rework how "split" loads/stores are handled.Gabe Black
Explicitly separate the way the data is represented in the underlying representation from how it's represented in the instruction. In order to make the ISA parser happy, the Mem operand needs to have a single, particular type. To handle that with scalar types, we just used uint64_ts and then worked with values that were smaller than the maximum we could hold. To work with these new array values, we also use an underlying uint64_t for each element. To make accessing the underlying memory system more natural, when we go to actually read or write values, we translate the access into an array of the actual, correct underlying type. That way we don't have non-exact asserts which confuse gcc, or weird endianness conversion which assumes that the data should be flipped 8 bytes at a time. Because the functions involved are generally inline, the syntactic niceness should all boil off, and the final implementation in the binary should be simple and efficient for the given data types. Change-Id: I14ce7a2fe0dc2cbaf6ad4a0d19f743c45ee78e26 Reviewed-on: https://gem5-review.googlesource.com/6582 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-13base: Add endianness conversion functions for std::array types.Gabe Black
These swap the endianness of each element within the array individually. They probably obsolute the Twin(32|64)_t types which I believe were used for SPARC. Change-Id: Ic389eb24bdcdc0081068b0c5a37abdf416f6c924 Reviewed-on: https://gem5-review.googlesource.com/6581 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-12tests: Turn fbtest into a gtest and move it to src/base.Gabe Black
Change-Id: I9ca57e24f27e0eb747d1f27262972a8abcd10fc8 Reviewed-on: https://gem5-review.googlesource.com/6342 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-12tests: Move the cprintftest unit test into src/base.Gabe Black
That way it will live alongside the code it tests. Change-Id: I00baad2206870a4619b7cee792a1d4c303dad04d Reviewed-on: https://gem5-review.googlesource.com/6324 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-12tests: Convert the cprintf unit test into a gtest.Gabe Black
Change-Id: I0f78a202d1f5fd29cda94ca93b540618831fe898 Reviewed-on: https://gem5-review.googlesource.com/6323 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-12tests: Move the trietest unit test into base.Gabe Black
This puts it alongside trie.hh, the header file it tests. Change-Id: Id8ca0c1d68bdc01807c5ba4b51c0142b1221385d Reviewed-on: https://gem5-review.googlesource.com/6281 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2017-12-12tests: Plumb dumps of the test trie into the gtest macros.Gabe Black
With this change, when one of the tests fails, it will output a dump of the trie data structure, making it a little easier to tell what happened. Change-Id: I0816ed727ef0b50fefd7ec485356b4fe8790bfe1 Reviewed-on: https://gem5-review.googlesource.com/6267 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 20:38:28 +0000