summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-05mem: Support for specifying the destination of a WriteCleanNikos Nikoleris
Previously, WriteClean packets would always write to the first memory below unless the memory was unable to allocate in which case it would be forwarded further below. This change adds support for specifying the destination of a WriteClean packet. The cache annotates the request with the specified destination and marks the packet as write-through upon its creation. The coherent xbar checks packets for their destination and resets the write-through flag when necessary e.g., the coherent xbar that is set as the PoC will reset the write-through flag for packets to the PoC. Change-Id: I84b653f5cb6e46e97e09508649a3725d72d94606 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5046 Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-05mem: Add support for WriteClean packets in the memory systemNikos Nikoleris
This change adds support for creating and handling WriteClean packets. The WriteClean operation is almost identical to a WritebackDirty with the exception that the cache generating a WriteClean retains a copy of the block. Change-Id: I63c8de62919fad0f9547d412f8266aa4292ebecd Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5045 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05mem: Add a WriteClean command to the packet classNikos Nikoleris
A WriteClean packet allows a cache to write a block to a memory below without evicting its copy. A typical usecase for a WriteClean packet is a cache clean operation. Change-Id: If356cb067da5ddf3210c135f41ef0891fb811568 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5044 Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-05mem-cache: Add support for checking whether a cache is busyNikos Nikoleris
This changeset adds support for checking whether the cache is currently busy and a timing request would be rejected. Change-Id: I5e37b011b2387b1fa1c9e687b9be545f06ffb5f5 Reviewed-on: https://gem5-review.googlesource.com/5042 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05mem: Add function to check if the slave can receive a timing reqNikos Nikoleris
This changeset adds support for tryTiming, an interface that allows a master to check if the slave is busy or otherwise if it can accept a timing request. Change-Id: Idc7c2337ae9ccf5dec54f308e488660591419a63 Reviewed-on: https://gem5-review.googlesource.com/5041 Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Christian Menard <christian.menard@tu-dresden.de> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-05mem: Add the notion of point of unification in the coherent xbarNikos Nikoleris
The point of unification is the first crossbar at which the instruction cache, the data cache and the translation table walks of the core are guaranteed to see the same copy of a memory location. Change-Id: Ica79b34c8ed4f1a8f2379748e8520a8f8afffa90 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5040 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05config, mem, hmc: fix HMC test scriptÉder F. Zulian
This patch keeps the logic behind the HMC model implementation untouched. Additional changes: - simple hello world script using HMC (SE simulation) Usage examples: ./build/ARM/gem5.opt configs/example/hmctest.py ./build/ARM/gem5.opt configs/example/hmctest.py --enable-global-monitor --enable-link-monitor --arch=same ./build/ARM/gem5.opt configs/example/hmctest.py --enable-global-monitor --enable-link-monitor --arch=mixed ./build/ARM/gem5.opt configs/example/hmc_hello.py ./build/ARM/gem5.opt configs/example/hmc_hello.py --enable-global-monitor --enable-link-monitor Change-Id: I64eb6c9abb45376b6ed72722926acddd50765394 Reviewed-on: https://gem5-review.googlesource.com/6061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-12-05learning_gem5: Adding code for SimpleCacheJason Lowe-Power
This is the rest of the code for part 2. See http://learning.gem5.org/book/part2/simplecache.html Change-Id: I5db099266a1196914656be3858fdd5fb4f8eab48 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5023 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Adds the simple MemObject codeJason Lowe-Power
Adding more code from Learning gem5 Part II See http://learning.gem5.org/book/part2/memoryobject.html Change-Id: Iaa9480c5cdbe4090364f02e81dc1d0a0ddac392a Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5022 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Add code for hello-goodbye exampleJason Lowe-Power
Adding more code from Learning gem5 Part II See http://learning.gem5.org/book/part2/parameters.html Change-Id: I9fe5655239e011c718c5cf5fd62bebcda66ea966 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5021 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Add code for simple SimObjectJason Lowe-Power
This adds code from Learning gem5 Part II. See http://learning.gem5.org/book/part2/helloobject.html Change-Id: Ic2caa07876ca57f937729c27ce29b2cd8bf2380c Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5020 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-04base: Rework the trie dump function to accept a different ostream.Gabe Black
It might often be useful to write output to cout when dumping a trie, but sometimes it might be useful to dump ot to something else like a string stream instead. Change-Id: Iaa4ae772c902b7dbc753f320d1a7eb5fcd4a3db3 Reviewed-on: https://gem5-review.googlesource.com/6266 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-04misc: Rename misc.(hh|cc) to logging.(hh|cc)Gabe Black
These files aren't a collection of miscellaneous stuff, they're the definition of the Logger interface, and a few utility macros for calling into that interface (panic, warn, etc.). Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1 Reviewed-on: https://gem5-review.googlesource.com/6226 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-04misc: Move the ExitLogger class definition into misc.ccGabe Black
This class isn't referred to outside of misc.hh, and isn't necessarily useful outside of the particular logging setup implemented in misc.cc. The Logger class itself is different since it provides a generic interface that can be used with different logging schemes. Change-Id: Ibae926fea039d9e3d75a43d97348bc4a3c5d555e Reviewed-on: https://gem5-review.googlesource.com/6225 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-04tests: Remove trietest's dependence on cprintf.Gabe Black
Dumping the structure of the tries being constructed was useful for debugging when the trie data structure was being developed, but the output can't be automatically verified easily, and what's considered correct depends on the specific implementation of the trie itself. To make some of the earlier tests more meaningful, additional lookups were added which verified that the correct values were returned when the nodes of the trie were in particular arrangements. Change-Id: Ib464ad1804d13fe40882da2190d7bf452da83818 Reviewed-on: https://gem5-review.googlesource.com/6223 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-04tests: Add a ptr helper function trietest.Gabe Black
This function casts an integer constant into a uint32_t * to make the actual test lines a bit less verbose. Change-Id: I9307dfd3d5861ddb9c0f6dcf4b28c846004f0a8d Reviewed-on: https://gem5-review.googlesource.com/6222 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-04tests: Get rid of the bitvectest unit test.Gabe Black
This test doesn't really test anything other than the STL vector implementation. Change-Id: I1b932640b1be4fb92a44d314d0b51a94a6a324a2 Reviewed-on: https://gem5-review.googlesource.com/6221 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-01arm: Enable ns registers access in secure modeGiacomo Travaglini
Arm security extension introduced register banking between secure and non-secure mode. This has been removed in armv8 using AArch64 in EL3, where the decoded register is by default the non-secure version. Using non-secure register infos(flags) was preventing secure execution to access the register with the MRC/MCR at EL1. The patch updates the following banked registers' flags so that their non-secure version can be accessed in secure mode: MISCREG_CSSELR, MISCREG_SCTLR, MISCREG_ACTLR, MISCREG_TTBR0, MISCREG_TTBR1, MISCREG_TTBCR, MISCREG_DACR, MISCREG_DFSR, MISCREG_IFSR, MISCREG_ADFSR, MISCREG_AIFSR, MISCREG_DFAR, MISCREG_IFAR, MISCREG_PAR, MISCREG_PRRR, MISCREG_MAIR0, MISCREG_NMRR, MISCREG_MAIR1, MISCREG_AMAIR0, MISCREG_AMAIR1, MISCREG_VBAR, MISCREG_CONTEXTIDR, MISCREG_TPIDRURW, MISCREG_TPIDRURO, MISCREG_TPIDRPRW, MISCREG_CNTP_TVAL, MISCREG_CNTP_CTL, MISCREG_CNTP_CVAL For those registers the following permission bits have been set: MISCREG_PRI_S_RD MISCREG_PRI_S_WR Change-Id: Ib881c526e75d69e313f8ef66eb78fc704de6bf59 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6201 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-30arch-riscv: use sext rather than manual masksAlec Roelke
Replace manual creation of masks for sign extension of immediates with the sext<N> function. Change-Id: Ief2df91a25500c64f5bcae0dcd437c1e3bb95e6c Reviewed-on: https://gem5-review.googlesource.com/6182 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-30arch-riscv: Remove spaces around ea_codeAlec Roelke
This patch makes mem.isa conform to style guidelines better by removing spaces around the "ea_code" argument default value assignment of the Load format. Change-Id: I1c62b99de3617a3734b128b00fb421773e021317 Reviewed-on: https://gem5-review.googlesource.com/6181 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Add missing license paragraphsAlec Roelke
Some of the files in earlier patches rearranging instruction definitions were missing copyright and license information. This patch adds them. Change-Id: I2ac4910a415de6032fc0b7d4422904c682e0ad87 Reviewed-on: https://gem5-review.googlesource.com/6183 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-11-29cpu: Don't override ISA if provided by userAndreas Sandberg
The BaseCPU.createThreads() method currently overrides the BaseCPU.isa parameter. This is sometimes undesirable. Change the behavior so that the default value for the isa parameter is the empty list and teach createThreads() to only override the ISA if none has been specified. Change-Id: I2ac5535e55fc57057e294d3c6a93088b33bf7b84 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6121 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-11-29cpu-minor: Add missing instruction statsDavid Guillen Fandos
Change-Id: I811b552989caf3601ac65a128dbee6b7bb405d7f Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> [ Updated to use IsVector instruction flag. ] Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5732 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-11-29arch-riscv: Remove static parts of AMOs out of ISAAlec Roelke
This patch removes the static parts of the RISC-V atomic memory instructions out of the ISA generated code and into arch/riscv/insts. It also makes the LR and SC instructions subclasses of MemInst from arch/riscv/insts/mem.hh. Change-Id: I6591f3d171045c4f1b457eb1264bbb7bd62b3e51 Reviewed-on: https://gem5-review.googlesource.com/6025 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move parts of mem insts out of ISAAlec Roelke
This patch moves static portions of the memory instructions out of the ISA generated code and puts them into arch/riscv/insts. It also simplifies the definitions of load and store instructions by giving them a common base class. Change-Id: Ic6930cbfc6bb02e4b3477521e57b093eac0c8803 Reviewed-on: https://gem5-review.googlesource.com/6024 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move unknown out of ISA descriptionAlec Roelke
This patch removes the Unknown instruction type out of the ISA generated code and puts it into arch/riscv/insts. Since there isn't any dynamic behavior to it, all that's left behind is a template for creating a new Unknown instruction. Change-Id: If7c3258a24ecadd3e00ab74586e1740e14f028db Reviewed-on: https://gem5-review.googlesource.com/6023 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move standard ops out of ISAAlec Roelke
This patch removes static portions of the standard instruction types from the generated ISA code and puts them into arch/riscv/insts. Some dynamically-generated content is left behind for each individual instruction's implementation. Also, BranchOp is removed due to its similarity with ImmOp and ImmOp and UImmOp are joined into a single templated class, ImmOp<T>. Change-Id: I1bf47c8b8a92a5be74a50909fcc51d8551185a2a Reviewed-on: https://gem5-review.googlesource.com/6022 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-28cpu-o3: Add missing vector stat initializersAndreas Sandberg
All of the O3 vector stats added by 'arch: ISA parser additions of vector registers' are currently missing their stat initializers. Add the missing stat initialization to InstructionQueue::regStats. Change-Id: Idc4b8e2824120a2542d8a604340a1b41bde6aa28 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6101 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-11-28arch-arm: Add haveEL pseudocode functionGiacomo Travaglini
This patch introduces the ARM pseudocode haveEL function into gem5. Change-Id: I0d96070959e8e13773eb7fa9964894ec0ff2cac2 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6162 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28arch-arm: Add assertions when extracting an ArmSystem from a TCGiacomo Travaglini
We sometimes need to cast the System pointer stored in a ThreadContext to an ArmSystem pointer to query global system setting. Add an assertion to make sure that the cast resulted in a valid pointer. Change-Id: Id382d0c1dceefee8f74d070c205c7b43b83ab215 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6161 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28tests: Move the bituniontest to be alongside the bitunion header.Gabe Black
Change-Id: I7c1a49c41672a1108fcf67c5505b0441f90588ef Reviewed-on: https://gem5-review.googlesource.com/6142 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28scons: Build GTests in the directory they're declared.Gabe Black
This will let us move unit tests into the directory of the code they're testing. Change-Id: I611582eb00a06a848f3ce7da89f64e42660cb844 Reviewed-on: https://gem5-review.googlesource.com/6141 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28tests: Reimplement the bituniontest as a googletest.Gabe Black
The implementation is very similar to the old test structurally, and should test all the same things. Change-Id: I58f1559d0943f2494ef06ee1d7ee5314a3852a8c Reviewed-on: https://gem5-review.googlesource.com/6085 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28scons: Add in a new type of unit test called GTest.Gabe Black
This type of unit test is almost the same as UnitTest, except that it builds in the googletest library with the appropriate flags, and it also omits all the gem5 object files by default. Change-Id: I230db7ede563a73a9da0ebeed44aca389f724465 Reviewed-on: https://gem5-review.googlesource.com/6084 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28tests: scons: Integrate the googletest library into the build.Gabe Black
A static library is built using gtest-all.cc and includes the gtest main function from gtest_main.cc. extra libraries to use when linking are included in the main environment variable GTEST_LIBS, and extra CPPFLAGS are in GTEST_CPPFLAGS. The library's path is added to the library search path, and it's headers to the header search path. Change-Id: I2bd6f705bd9fac5db9280996f574b168c11ff8ce Reviewed-on: https://gem5-review.googlesource.com/6083 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28tests: Import the googletest library, release version 1.8.0.Gabe Black
Change-Id: Ic6c1391a19238011ff5cc97f513dbdc020dc6144 Reviewed-on: https://gem5-review.googlesource.com/6082 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28scons: Minor cleanup of how partial linking is handled in makeEnv.Gabe Black
Git rid of the unused partial_objs variable, and change append to extend since the result of builders is a list of nodes and not individual nodes, even if there's only one target. Change-Id: Ie51225d3ea699eb7da18199ac3bf3e868e3994a6 Reviewed-on: https://gem5-review.googlesource.com/5985 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-28arch-riscv: Move static_inst into a directoryAlec Roelke
This patch creates an "insts" directory in src/arch/riscv to store static portions of instruction definitions that aren't part of the code generated by the ISA description. It serves as a starting point for future patches to simplify the ISA description. Change-Id: I6700522143f6fa6c9b18a30e1fbdc8f80cdc7afa Reviewed-on: https://gem5-review.googlesource.com/6021 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-27tests: Build the input file into the initest unit test.Gabe Black
This breaks an external dependency and makes the expected command line conform to the other unit tests. Also get rid of some ancient tests which test adding to the ini's contents based on command line arguments. This test still needs to be modified so that it actually checks whether what happened was correct. Change-Id: I2c9ea9fa79781bceb5cd3d1419870924e8bbd45f Reviewed-on: https://gem5-review.googlesource.com/6081 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-27scons: Break make_obj into make_static and make_shared functions.Gabe Black
The make_obj function took a boolean value which just selected which of the two lines it in would actually do something. This change breaks it into two lambdas, make_static and make_shared, which just do whichever line would have been requested, making the funciton name more self descriptive and getting rid of the generally unnamed and opaque boolean argument. Change-Id: I457e40034b7e7f5a3e7294a8e1f15bbd42e0720e Reviewed-on: https://gem5-review.googlesource.com/5984 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-27scons: Remove the extra_deps option from the helper function make_obj.Gabe Black
This had only one use, and made the function more complicated than it needed to be. Change-Id: I22147a0c1239b457c577a6a24b423065e539833b Reviewed-on: https://gem5-review.googlesource.com/5983 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-27scons: Get rid of a flag which makes Werror optional.Gabe Black
This flag wasn't being used. Also move the Werror code to the SConstruct now that it's being applied universally. Change-Id: I18b00d4b41bc1add9271ca299c020c14970a6926 Reviewed-on: https://gem5-review.googlesource.com/5982 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-27scons: Move some compiler flag setting code to the SConstruct.Gabe Black
These settings are invariant, so there's no reason to apply them over and over again for the child environments used for various build products. Change-Id: Icb4053105e4f1c43008f2422ba30c7206b7ff365 Reviewed-on: https://gem5-review.googlesource.com/5981 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-27scons: Get rid of SourceFile's done function.Gabe Black
This function doesn't seem to be used by anything. A similar one off mechanism exists for SimObjects which is we might also be able to get rid of. Change-Id: I65038c3495fa69cf94042dc78f09876d5e9a557f Reviewed-on: https://gem5-review.googlesource.com/5841 Maintainer: Gabe Black <gabeblack@google.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-11-27scons: Switch from "guards" to "tags" on source files.Gabe Black
Tags are just arbitrary strings which are attached to source files which mark them as having some property. By default, all source files have the "gem5 lib" tag added to them which marks them as part of the gem5 library, the primary component of the gem5 binary but also a seperable component for use in, for example, system C. The tags can be completely overridden by setting the "tags" parameter on Source, etc., functions, and can be augmented by setting "add_tags" which are tags that will be added, or alternatively additional tags. It's possible to specify both, in which case the tags will be set to the union of tags and add_tags. add_tags is supposed to be a way to add extra tags to the default without actually overriding the default. Both tags and add_tags can be a list/tuple/etc of tags, or a single string which will be converted into a set internally. Other existing tags include: 1. "python" for files that need or are used with python and are excluded when the --without-python option is set 2. "main" for the file(s) which implement the gem5 binary's main function. 3. The name of a unit test to group its files together. 4. Tags which group source files for partial linking. By grouping the "tags" into a single parameter instead of taking all extra parameters as tags, the extra parameters can, in the future, be passed to the underlying scons environment. Also, the tags are either present or not. With guards, they could be present and True, present and False, or not present at all. Change-Id: I6d0404211a393968df66f7eddfe019897b6573a2 Reviewed-on: https://gem5-review.googlesource.com/5822 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-22tests: Resurrect initest input file(s).Gabe Black
Delete the current version of foo.ini which was modified, restore the previous version, and initest.ini. Preprocess initest.ini which includes foo.ini, and tidy up the resulting file. This file will (mostly) get the initest unit test to work. Some other cleanups are still necessary. Change-Id: I4e46abc73ac89f88177eec92f572452f63ba8019 Reviewed-on: https://gem5-review.googlesource.com/6041 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-11-22tests: Fix the stats unit test.Gabe Black
This has been broken since February. The interface for opening initializing where the stats output should go was changed, but the test wasn't updated. Change-Id: I54bd8be15bf870352d5fcfad95ded28d87c7cc5a Reviewed-on: https://gem5-review.googlesource.com/6001 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-22arch-arm: Add support for the brk instructionAndreas Sandberg
Add support for software breakpoints as signalled by the aarch64 brk instruction. This introduces a new SoftwareBreakpoint fault. Change-Id: I93646c3298e09d7f7b0983108ba8937c7331297a Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5721 Reviewed-by: Giacomo Gabrielli <Giacomo.Gabrielli@arm.com>
2017-11-22arch-arm: HVC instruction undefined in secure EL1Giacomo Travaglini
Since EL2 is not available in secure mode, any HVC call from secure mode should be treated as undefined. This behaviour was implemented in aarch32 HVC but not in 64 bit version Change-Id: Ibaa4d8b1e8fe01d2ba3ef07494c09a4d3e7e87b0 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5921 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-22arch-riscv: Add missing system callsAlec Roelke
This patch adds all system calls present in riscv-gnu-toolchain at commit hash 65cb174. Many of them do not have implementations in gem5, so they are just placeholders. [Remove the variadic macro and replace it with a function that has default arguments because variadic macros may not be portable across compilers] [Remove spaces around default arguments of createSyscall for better style] [Switch from using a loose function to using SyscallDesc's new constructor] Change-Id: Iff97c689109121b39df423c72d0e79c6366e31b9 Reviewed-on: https://gem5-review.googlesource.com/5322 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>