summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-23arch-arm: Change mcrMrc15TrapToHyp signatureGiacomo Travaglini
This patch is moving MiscRegs reading inside the mcrMrc15TrapToHyp helper function. Rather than passing registers as arguments, we are just passing a ThreadContext pointer Change-Id: I6636dd3a4f92f757479d8a8d2c47de050a0b9eae Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17988 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-22mem: Add invalid context id check on LLSC checksTiago Muck
If the request's address is in the LLSC list, its context Id was being fetched unconditionally, which could cause the assert at Request::contextId() to fail. Change-Id: Iae9791f81c8fe9a7fcd842cd8ab7db18f34f2808 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18792 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-22sim-se: remove comment for code that movedBrandon Potter
The page table code must have moved from this class, because the comment no longer accurately reflects upon any of the surrounding code. Change-Id: If08a4298c1237a541d9875ddeaf3d3ecfd98e9db Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12300 Maintainer: Brandon Potter <Brandon.Potter@amd.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-05-22dev-arm: Provide a GICv3 ITS ImplementationGiacomo Travaglini
This patch introduces the GICv3 ITS module, which is in charge of translating MSIs into physical (GICv3) and virtual (GICv4) LPIs. The patch is only GICv3 compliant, which means that there is no direct virtual LPI injection (this also means V* commands are unimplemented) Other missing features are: * No 2level ITS tables (only flat table supported) * Command errors: when there is an error in the ITS, it is IMPLEMENTATION DEFINED on how the ITS behaves. There are three possible scenarios (see GICv3 TRM) and this implementation only supports one of these (which is, aborting the command and jumping to the next one). Furter patches could make it possible to select different reactions * Invalidation commands (INV, INVALL) are only doing the memory table walks, assuming the current Gicv3Redistributor is not caching any configuration table entry. Change-Id: If4ae9267ac1de7b20a04986a2af3ca3109743211 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18601 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-21sim-se: change syscall function signatureBrandon Potter
The system calls had four parameters. One of the parameters is ThreadContext and another is Process. The ThreadContext holds the value of the current process so the Process parameter is redundant since the system call functions already have indirect access. With the old API, it is possible to call into the functions with the wrong supplied Process which could end up being a confusing error. This patch removes the redundancy by forcing access through the ThreadContext field within each system call. Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-21sim-se: remove /sys from special pathsTony Gutierrez
Currently, the open system call implementation in SE mode treats /sys/ as a special path that is opened using a special open handler. The ROC runtime, however, reads several files in /sys/ that are supported via path redirection. Here we remove /sys/ from the special files so that the necessary files may be read via path redirection. Change-Id: Ifdab38ea1e6cc486ad43aec96b6e032fe63f137d Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12127 Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-21scons: Move the marshal binary to the build directoryChun-Chen TK Hsu
The current marshal binary is in $BUILD/python/ directory which makes the dynamic linker fail to find shared libraries with rpath information when the marshal is executing. Moving $BUILD/python/marshal to $BUILD/marshal solves this problem. This is because the marshal binary is built with the same flags as gem5 binary. And if one adds rpath information with add_local_rpath() in some SConscripts, the marshal binary will also link to those shared libraries and have the same rpath information. So it must be in the same directory as gem5 binary such that the dynamic linker could find those shared libraries with the rpath information. Signed-off-by: Chun-Chen TK Hsu Change-Id: I98d9c3e0180abefe6b2b6a78ee5a96324038eb53 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18888 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-20misc: Added dot_writer for Ruby's network topologyTiago Muck
Change-Id: Ic71ca7bc2eb4174d70afa368bc9cc987f3df89e9 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17548 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-20mem-cache: Add multi-prefetcher adaptorAndreas Sandberg
This patch adds a meta-prefetcher that enables gem5's cache models to connect to multiple prefetchers. Sub-prefetchers still use the probes-based interface and training can be controlled independently. However, when the cache requests a prefetch packet, the adaptor traverses the priority list of prefetchers and uses the first prefetcher that is able to generate a prefetch. Kudos to Mitch Hayenga for the original version of this patch. Change-Id: I25569a834997e5404c7183ec995d212912c5dcdf Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18868 Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-20sim: Make the Process create function use the object loader mechanism.Gabe Black
This gets rid of the big mass of #if-s around headers and around the code which creates an object file. As a nice side bonus, this also means that in addition to supporting multiple OS/arch combinations simultaneously, the object file loader could support multiple ISAs simultaneously as well, since each could load and set up its object file loaders indepedently and without the base process classes knowledge/involvement. Change-Id: I0a19ad06e30e9062a96d27f00b66756eb3a595ba Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18631 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-05-20x86: Add an object file loader for linux.Gabe Black
Change-Id: I283dd1f52fd020ad3c226eb00fc9216ee034c67f Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18630 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-20sparc: Add an object file loader for linux and solaris.Gabe Black
Change-Id: I76bcbc06714f7d538f03a8311994a868de3640f1 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18629 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-20riscv: Add an object file loader for linux.Gabe Black
Change-Id: I3accca91cc4e02fa8e3a1169590cbe6696cf05e2 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18628 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Alec Roelke <alec.roelke@gmail.com> Maintainer: Alec Roelke <alec.roelke@gmail.com>
2019-05-20power: Add an object file loader for linux.Gabe Black
Change-Id: I64ce81e98a6dc96754554d0fdcd7d16b8a2752d4 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18587 Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
2019-05-20mips: Add an object file loader for linux.Gabe Black
Change-Id: Icae6430a210076117cf2ceadce52d6efbe58a5f3 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18586 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-18arm: Add an object file loader for linux and freebsd.Gabe Black
Change-Id: Ie5fd187a4897aa608ffc12278b23d3ee8c0f323c Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18585 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-05-18alpha: Add an object file loader for linux.Gabe Black
Change-Id: I91c4019567bdf74b2517fda597121a6ad107cb86 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18584 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-18base: Add a type for keeping track of object file loaders.Gabe Black
This avoids having a big pile of #if-s in sim/process.cc and allows dynamically adding new types of object file loaders which might recognize new arch/OS combinations. Change-Id: Ie3b9c1aa2974d30a61afc4fcc529ffd6a74d43e0 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18583 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-18arch, base, cpu, dev, mem, sim: Remove #if 0-ed out code.Gabe Black
This code will be preserved through version control, but otherwise creates clutter and will rot in place since it's never compiled. Change-Id: Id265f6deac445116843956ea5cf1210d8127274e Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18608 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-17configs: Generalize FileSystemConfig for non se.pyJason Lowe-Power
This patch updates the FileSystemConfig so it works with more kinds of config scripts (e.g., the Learning gem5 scripts). There are 4 main changes: - Added system as a parameter to the config_filesystem function so the function can search the system for the number of CPUs instead of relying on options from Options.py - Instead of calling redirect_paths everywhere config_filesystem is used, now it is implicitly called. - Cleaned up the Ruby scripts a bit to remove redundant calls to config_filesystem - Added a config_filesystem call to the Ruby Learning gem5 script (currently the only Learning gem5 script that requires it). In the future, I think it would be better to move the config_filesystem call into simulate.py, probably into the instantiate function. I tried to use the per-CPU configuration parameters instead of options from Options.py, but that's not possible until after the SimObject params have been finalized in instantiate. Change-Id: Ie6501a7435cfb3ac9d2b45be3722388b34063b1e Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18848 Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-17arch-arm: implement VMINNM and VMAXNM scalar versionCiro Santilli
ARMv8.2 16-bit versions have not yet been implemented, but a placeholders were created for them. Refactor the nearby decoding tree to closely match the ARM spec A32 decode table. That piece of the tree can also be called from thumb which decodes it in the same way, although the thumb decode table has a different terminology The old code didn't match neither A32 or T32 terminologies, so it is better to at least match one of them to help verify correctness. Change-Id: Iabbbca2932557cf6c98ce36690c385c3ddf39ed8 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18690 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-17arch-arm: implement VMINNM and VMAXNM SIMD versionCiro Santilli
This instruction is backported from aarch64. In order to use the existing fplibMinNum backend, we first move VMIN and VPMIN to use fplib. Adding VMINNM is then trivial. Change-Id: I404daabeb6079f60e51a648a06d5b3e54f1c24a9 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18689 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-17arch-arm: rename operands to match spec in isa/formats/fp.isaCiro Santilli
Matches ARM DDI 0487D.a decoding tables. Change-Id: I48338ef956a04308d55d1022229ebe0962a8fe5d Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18688 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-14mem-ruby: MOESI_CMP_dir cleanupTiago Muck
Removed unused states and actions Change-Id: I3dc684c78d4b92d219e71522ddb706a13f9874d1 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18415 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: John Alsop <johnathan.alsop@amd.com> Reviewed-by: Matthew Poremba <matthew.poremba@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Cache latencies for MOESI_CMP_dirTiago Muck
Modified both L1 and L2 controllers to take into account the cache latency parameters. Default values in the configuration script updated as well. Change-Id: I72bb8dd29ee0b02da06e1addf13b266fe4d1e979 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18414 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Hit latencies defined by the controllersTiago Muck
Removed the icache/dcache hit latency parameters from the Sequencer. They were replaced by the mandatory queue enqueue latency that is now defined by the top-level cache controller. By default, the latency is defined by the mandatory_queue_latency parameter. When the latency depends on specific protocol states or on the request type, the protocol may override the mandatoryQueueLatency function. Change-Id: I72e57a7ea49501ef81dc7f591bef14134274647c Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18413 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Do not change blocked msg enqueue infoTiago Muck
Updating the message counter and enqueue times when adding blocked messages back to the queue does not make a lot of sense since these messages are not new arrivals. More importantly, this may lead to starvation. See the scenario below: 1) Request A for a blocked line X arrives 2) A is handled; X is blocked so A is stalled 3) Request B for X arrives; Reponse for X arrives 4) Response is handled; X unblocked; A added back to the request queue 5) B is handled ahead of A (since A's arrival was updated); X may become blocked again If new requests keep comming for X, A may will be stalled forever. Change-Id: Icad79f3f716a870e91cb3455437b8b3c35f130ac Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18412 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Matthew Poremba <matthew.poremba@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Unique ranks for MOESI_CMP_dir in portsTiago Muck
Setting different values for the rank parameter for all inputs ports. If left unset, it defaults to 0. This may cause issues since the rank is used as an index in the controller's list of stalled buffers. Change-Id: Ie8ff660b7450df959292311040aebf802657efcf Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18411 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Change MOESI_CMP_Dir L2 addressingTiago Muck
L1 controller selects the L2 to message based on the assigned address ranges instead of explicitly interleaving bits in the L1 controller. This simplifies the L1 controller implementation a bit and allows for more flexibility when changing the address->controller mapping. Change-Id: Ie67999bb977566939432a5045f65dbd2da81816a Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18410 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Fix MOESI_CMP_dir debug msgTiago Muck
Change-Id: I3fd32bd2e81dbf9a8ea49a43727564b8a9d64767 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18409 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14mem-ruby: Prevent response stalls on MOESI_CMP_directoryTiago Muck
When a message triggers a transition that has actions which allocate TBEs, the generated code automatically includes a check for the TBETable size before executing any action. If the table is full, the transition returns TransitionResult_ResourceStall and no more messages from the buffer are handled (until the next cycle). This behavior may lead to deadlocks in the MOESI_CMP_directory protocol since events triggered by the response queue may allocate TBEs (e.g. L2 replacements triggered by the response queue). If the table is full, the queue is stalled preventing other responses from freeing TBEs. This patch fixes this by handling WRITEBACK_DIRTY_DATA/CLEAN_DATA messages as requests and WB_ACK/WB_NACK as responses. All controllers are changed to work with the new types. With this fix, responses are always handled first in all controllers, and no response triggers TBE allocations. Change-Id: I377c0ec4f06d528e9f0541daf3dcc621184f2524 Signed-off-by: Tiago Muck <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18408 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Matthew Poremba <matthew.poremba@amd.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: John Alsop <johnathan.alsop@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14arch-arm: Do not check MustBeOne flag for TLB requests from the prefetcherJavier Bueno
Allow TLB requests generated from prefetchers to override the MustBeOne arch flag. This allows the prefetchers to issue requests without having to know architecutre-specific flags. Change-Id: Id83e0c93f3d1a614da11c4f344ab4dc594423672 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18768 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-14configs: Fix duplicate branchPred reference in Simulation.pyJavier Bueno
Change-Id: I5ef5fb7ebc5fc2a4776adc43643c4df27efc341c Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18769 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-05-14Revert "cpu: fix how a thread starts up in MinorCPU"Giacomo Travaglini
This reverts commit 02dafc5498750d9734ba8f2a1608a846f90b71d1. The commit was part of a patchset which broke MinorCPU regressions (switcheroo) Change-Id: I0a8098fc71abe5838014e587dbe372b258d8aa9f Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18604 Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-14Revert "cpu: stop scheduling suspended threads in MinorCPU"Giacomo Travaglini
This reverts commit 6a6668bbc4b038b98eb3ee64ffb034719316afd9. The commit was part of a patchset which broke MinorCPU regressions (switcheroo) Change-Id: I3c16a6478ba44b9d27cdd3d64a710a356999df05 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18603 Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-14Revert "cpu: fix branching when thread is suspended in MinorCPU"Giacomo Travaglini
This reverts commit e437086341712f1435db655b3527ea29b3311f4e. The commit was part of a patchset which broke MinorCPU regressions (switcheroo) Change-Id: Ib8482034c2402008ccfa552325a8eb31e731b619 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18602 Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-14mem-cache: Use SatCounter for prefetchersDaniel
Many prefetchers re-implement saturating counters with ints. Make them use SatCounters instead. Added missing operators and constructors to SatCounter for that to be possible and their respective tests. Change-Id: I36f10c89c27c9b3d1bf461e9ea546920f6ebb888 Signed-off-by: Daniel <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17995 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Javier Bueno Hedo <javier.bueno@metempsy.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14base: Add operators to SatCounterDaniel
Add shift, add and subtract assignment operators, as well as copy and move constructor and assignments to SatCounter, so that it they can be used by the prefetchers. Also add extra useful functions to calculate saturation oercentile so that the instantiator does not need to be aware of the counter's maximum value. Change-Id: I61d0cb28c8375b9d2774a39011e4a0aa6fe9ccb7 Signed-off-by: Daniel <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17996 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-05-14base: Add GTest to SatCounterDaniel
Add a GTest to the SatCounter class. Change-Id: Iaf1b18db9fe8d7fe32e0e40c7947dcd1fd6cc33b Signed-off-by: Daniel <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17994 Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-05-14base: Move SatCounter to base directoryDaniel
Saturating counters are used by many objects, not only the cpu predictors. Therefore, move the class to the base folder so that it can be more easily used. Change-Id: I26f799324bdd8720ab8834c72a2002149cee777c Signed-off-by: Daniel <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17993 Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-05-14cpu: Revamp saturating countersDaniel
Revamp the SatCounter class, improving comments, implementing increment, decrement and read operators to solve an old todo, and adding missing error checking. Change-Id: Ia057c423c90652ebd966b6b91a3471b17800f933 Signed-off-by: Daniel <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17992 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-13config: add an option to list and select indirect branch predictorJairo Balart
Change-Id: I9a855d36de7d95b7785ff8a897899037cea6a3d8 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/15320 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-13cpu: Make the indirect predictor into a SimObjectJairo Balart
Change-Id: Ice6549773def7d3e944fae450d4a079bc351e2ba Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/15319 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-12mem-ruby: Replace string parameter in MultiBitSelBloomFilterDaniel R. Carvalho
Replace string parameter from MultiBitSelBloomFilter's constructor by their tokenized counterparts. Change-Id: I2e3db109dc4814fa0e9c13259f1136a6c4083092 Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18728 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-11arch-arm: Add initial support for SVE contiguous loads/storesGiacomo Gabrielli
Thanks to Pau Cabre and Adria Armejach Sanosa for their contribution of bugfixes. Change-Id: If8983cf85d95cddb187c90967a94ddfe2414bc46 Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13519 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-05-11cpu,mem: Add support for partial loads/stores and wide mem. accessesGiacomo Gabrielli
This changeset adds support for partial (or masked) loads/stores, i.e. loads/stores that can disable accesses to individual bytes within the target address range. In addition, this changeset extends the code to crack memory accesses across most CPU models (TimingSimpleCPU still TBD), so that arbitrarily wide memory accesses are supported. These changes are required for supporting ISAs with wide vectors. Additional authors: - Gabor Dozsa <gabor.dozsa@arm.com> - Tiago Muck <tiago.muck@arm.com> Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92 Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2019-05-11cpu: Add a memory access predicateGiacomo Gabrielli
This changeset introduces a new predicate to guard memory accesses. The most immediate use for this is to allow proper handling of predicated-false vector contiguous loads and predicated-false micro-ops of vector gather loads (added in separate changesets). Change-Id: Ice6894fe150faec2f2f7ab796a00c99ac843810a Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17991 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Bradley Wang <radwang@ucdavis.edu> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2019-05-10config, sim-se: bugfix for 54c77aa0Brandon Potter
The NULL ISA does not have some members for the options class which are referenced by the FileSystemConfig code. Create default values for the members so that the simulation does not fail during the configuration phase. Change-Id: Ie65bf0e5550c964eae42d1df4c36c2c5bc4ea703 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18748 Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-05-09configs: Fix FileSystemConfig importDaniel R. Carvalho
Add source to FileSystemConfig import Change-Id: I2cd70a332244cbdc58b1b7c06d589b4339f6e19a Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18709 Tested-by: kokoro <noreply+kokoro@google.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-05-09tests: Fix import scope of testDaniel R. Carvalho
Add missing scope delimiters to Alpha tester Change-Id: Ib6796864c0dc8fc3108d9d2a7c2f770d2122889a Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18708 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 05:49:56 +0000