| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This patch replaces RUBY with PROTOCOL in all the SConscript files as
the environment variable that decides whether or not certain components
of the simulator are compiled.
|
|
|
|
This patch drops RUBY as a compile time option. Instead the PROTOCOL option
is used to figure out whether or not to build Ruby. If the specified protocol
is 'None', then Ruby is not compiled.
|
|
|
|
Seems easier than pestering people about it.
Note also that path is now absolute, so you don't get errors
when invoking hg from subdirectories.
Also whacked unused mercurial_bin_not_found message (the
code that used this was deleted a couple months ago in
rev 5138d1e453f1).
|
|
we can add it back within python in some future changeset
|
|
Make sure all command-line targets and EXTRAS directories
are interpreted relative to the launch directory. This
turns out to be very useful when building code from an
EXTRAS directory using SCons's -C option.
We were trying to do this with targets but it didn't actually
work since we didn't update BUILD_TARGETS (so SCons got
confused internally). We weren't even trying with EXTRAS.
To simplify the code, the default target is also interpreted
relative to the launch dir even though it was explicitly
handled as relative to the m5 dir before... I doubt anyone
really uses this anyway so it didn't seem worth the complexity.
(Maybe we should get rid of it?)
|
|
Currently the --default= option only looks at the predefined
build configs (in m5/build_opts), so you're limited to basing
a new build config off of those (ALPHA_SE, etc.). If you've
already defined a non-standard build config and want to clone
it or tweak it, you have to start from scratch. This patch
causes --default= to look first among the existing builds
(in build/variables) before looking in build_opts so you
can specify an existing non-standard build config as a
starting point for a new config.
|
|
FastAlloc's reuse policies can mask allocation bugs, so
we typically want it disabled when debugging. Set
FORCE_FAST_ALLOC to enable even when debugging, and set
NO_FAST_ALLOC to disable even in non-debug builds.
|
|
This causes a lot of rebuilds that could have otherwise possibly been
avoided, and, more annoyingly, a lot of unnecessary rerunning of the
regressions. The benefits of having the revision in the output haven't
materialized, so this change removes it.
|
|
|
|
|
|
|
|
The global sticky options were being printed with a heading, and then the
global nonsticky options were being printed immediately after them without a
heading. Because the two lists ran together and the first had its own heading,
it looked like -all- those options where sticky even though some of them
aren't. This change adds a label to the second list so it's clear they're
different.
|
|
|
|
Use posix clock functions (and librt) if it is available.
Inline a bunch of functions and implement more operators.
* * *
time: more cleanup
|
|
I've renamed the check_whitespace operation to check_style. You're going to
need to change your .hg/hgrc file. While you're at it, add a pre-qrefresh
hook please.
|
|
I like the brevity of Ali's recent change, but the ambiguity of
sometimes showing the source and sometimes the target is a little
confusing. This patch makes scons typically list all sources and
all targets for each action, with the common path prefix factored
out for brevity. It's a little more verbose now but also more
informative.
Somehow Ali talked me into adding colors too, which is a whole
'nother story.
|
|
clean up the code a little bit while we're at it.
I recommend that everyone adds the pre-qrefresh hook below since it
will make qref run the style hook and not just commit/qpush
[extensions]
style = <m5 path>/util/style.py
[hooks]
pretxncommit.style = python:style.check_whitespace
pre-qrefresh.style = python:style.check_whitespace
|
|
|
|
|
|
|
|
|
|
|
|
|
|
and force it to True for builds that imply Ruby protocols
(else unexpected things happen when testing these builds
with RUBY=False).
|
|
|
|
The arguments were added to the global_sticky_vars Variables object after the
basic help text was generated. As a result, the "actual:" value wouldn't
reflect the arguments to scons and wouldn't really be the "actual" value used
by the build. This change fixes that by updating global_sticky_vars slightly
earlier.
|
|
|
|
|
|
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
|
|
Default is false
|
|
Add the PROTOCOL sticky option sets the coherence protocol that slicc
will parse and therefore ruby will use. This whole process was made
difficult by the fact that the set of files that are output by slicc
are not easily known ahead of time. The easiest thing wound up being
to write a parser for slicc that would tell me. Incidentally this
means we now have a slicc grammar written in python.
|
|
Start by turning all of the *Source functions into classes
so we can do more calculations and more easily collect the data we need.
Add parameters to the new classes for indicating what sorts of flags the
objects should be compiled with so we can allow certain files to be compiled
without Werror for example.
|
|
env is used as a local variable all over the place and sometimes it is
easy to get confused as to whether the global env or local env is being
used. This will become especially important when I change the way we
support our variants.
|
|
1) -L is automatically added, so don't do it ourselves
2) prepend the paths for gzstream and libelf so they are certain to
come first. The problem is that python might add /usr/lib to the path
and the user might have a locally installed version of libelf installed.
|
|
|
|
|
|
|
|
move dnet to the correct place so that we use this
--HG--
rename : ext/dnet/dnet/addr.h => ext/dnet/addr.h
rename : ext/dnet/dnet/arp.h => ext/dnet/arp.h
rename : ext/dnet/dnet/blob.h => ext/dnet/blob.h
rename : ext/dnet/dnet/eth.h => ext/dnet/eth.h
rename : ext/dnet/dnet/fw.h => ext/dnet/fw.h
rename : ext/dnet/dnet/icmp.h => ext/dnet/icmp.h
rename : ext/dnet/dnet/intf.h => ext/dnet/intf.h
rename : ext/dnet/dnet/ip.h => ext/dnet/ip.h
rename : ext/dnet/dnet/ip6.h => ext/dnet/ip6.h
rename : ext/dnet/dnet/os.h => ext/dnet/os.h
rename : ext/dnet/dnet/rand.h => ext/dnet/rand.h
rename : ext/dnet/dnet/route.h => ext/dnet/route.h
rename : ext/dnet/dnet/tcp.h => ext/dnet/tcp.h
rename : ext/dnet/dnet/udp.h => ext/dnet/udp.h
|
|
|
|
|
|
|
|
|
|
|
|
Add some features to read_command so it works a little bit better
Clean up the mercurial checks.
Filter the user environment and only pick out the useful stuff.
|
|
This allows me to clean things up so we are up to date with respect to
deprecated features. There are many features scheduled for permanent failure
in scons 2.0 and 0.98.1 provides the most compatability for that. It
also paves the way for some nice new features that I will add soon
|
|
The gzstream package provides an ostream-interface for writing gzipped files.
The package comes from:
http://www.cs.unc.edu/Research/compgeom/gzstream/
And is distributed under the LGPL license. Both the license and version
information has been preservered, though all other files in the package have
been purged. Minor modifications to the code have been made. The output module
detects when a filename ends in .gz and constructs an ogzstream object instead
of an ofstream object. This works for both the create(...) and find(...)
commands. Additionally, since gzstream objects needs to be closed to ensure
proper file termination, I have the output deconstructor deleting all ostream's
that it manages on behalf of find(...). At the moment, the only output file
that I know this functionality works for is stats, i.e. by specifying
"--stats-file=m5stats.txt.gz" on the command line.
|
|
The current EXTRAS will fail if the top level directory pointed to by EXTRAS
has a SConscript file in it. We allow this by including the directory name
of the EXTRA in the build directory which prevents a clash between
src/SConscript and extra/SConscript. Maintain compatibility with older uses
of EXTRAS by adding a -I for each top level extra directory.
|
