summaryrefslogtreecommitdiff
path: root/configs/common/Options.py
AgeCommit message (Collapse)Author
2019-03-20invisispec-1.0 configsIru Cai
2018-01-29config: Embed Device Tree generation in fs.py configGlenn Bergmans
Equips the fs.py config routine with an extra commandline option --generate-dtb that will generate a dtb file automatically before running the simulation. Only works with ARM systems and gives a warning if the simulated system is not of --machine-type VExpress_GEM5_V1. Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5968 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-06-19configs, arm: add option to enable security extensionsGedare Bloom
Change-Id: I0c839bb649a5d2d73080b7e718da3c9b5839cf8c Signed-off-by: Gedare Bloom <gedare@rtems.org> Reviewed-on: https://gem5-review.googlesource.com/3264 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-05-06config: Remove support for CPU aliases.Gabe Black
This was added for backwards compatability, but it adds a decent amount of complexity. The table below shows what CPU class name to use in place of a given alias. +==========+========================================================+ | Alias | CPU class | +==========+========================================================+ | timing | TimingSimpleCPU | | atomic | AtomicSimpleCPU | | minor | MinorCPU | | detailed | DrivO3CPU | | kvm | ArmKvmCPU, ArmV8KvmCPU or X86KvmCPU, depending on arch | | trace | TraceCPU | +==========+========================================================+ Change-Id: I251c4f64b7869c6b64dd25b36967ae240f01ef08 Reviewed-on: https://gem5-review.googlesource.com/2940 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-02-14mem: Update DRAM configuration namesWendy Elsasser
Names of DRAM configurations were updated to reflect both the channel and device data width. Previous naming format was: <DEVICE_TYPE>_<DATA_RATE>_<CHANNEL_WIDTH> The following nomenclature is now used: <DEVICE_TYPE>_<DATA_RATE>_<n>x<w> where n = The number of devices per rank on the channel x = Device width Total channel width can be calculated by n*w Example: A 64-bit DDR4, 2400 channel consisting of 4-bit devices: n = 16 w = 4 The resulting configuration name is: DDR4_2400_16x4 Updated scripts to match new naming convention. Added unique configurations for DDR4 for: 1) 16x4 2) 8x8 3) 4x16 Change-Id: Ibd7f763b7248835c624309143cb9fc29d56a69d1 Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
2016-10-26dev: Add m5 op to toggle synchronization for dist-gem5.Michael LeBeane
This patch adds the ability for an application to request dist-gem5 to begin/ end synchronization using an m5 op. When toggling on sync, all nodes agree on the next sync point based on the maximum of all nodes' ticks. CPUs are suspended until the sync point to avoid sending network messages until sync has been enabled. Toggling off sync acts like a global execution barrier, where all CPUs are disabled until every node reaches the toggle off point. This avoids tricky situations such as one node hitting a toggle off followed by a toggle on before the other nodes hit the first toggle off.
2016-10-26config: Break out base options for usage with NULL ISAAndreas Hansson
This patch breaks out the most basic configuration options into a set of base options, to allow them to be used also by scripts that do not involve any ISA, and thus no actual CPUs or devices. The patch also fixes a few modules so that they can be imported in a NULL build, and avoid dragging in FSConfig every time Options is imported.
2016-09-13config: move dist-gem5 options to common configMichael LeBeane
dist-gem5 should not be restricted to FullSystem mode.
2016-01-07config: Updates for distributed gem5 simulationsGabor Dozsa
2015-12-07config: Enable elastic trace capture and replay in se/fsRadhika Jagtap
This patch adds changes to the configuration scripts to support elastic tracing and replay. The patch adds a command line option to enable elastic tracing in SE mode and FS mode. When enabled the Elastic Trace cpu probe is attached to O3CPU and a few O3 CPU parameters are tuned. The Elastic Trace probe writes out both instruction fetch and data dependency traces. The patch also enables configuring the TraceCPU to replay traces using the SE and FS script. The replay run is designed to resume from checkpoint using atomic cpu to restore state keeping it consistent with FS run flow. It then switches to TraceCPU to replay the input traces.
2015-12-04arm, config: Automatically discover available platformsAndreas Sandberg
Add support for automatically discover available platforms. The Python-side uses functionality similar to what we use when auto-detecting available CPU models. The machine IDs have been updated to match the platform configurations. If there isn't a matching machine ID, the configuration scripts default to -1 which Linux uses for device tree only platforms.
2015-08-03misc: Coupling gem5 with SystemC TLM2.0Matthias Jung
Transaction Level Modeling (TLM2.0) is widely used in industry for creating virtual platforms (IEEE 1666 SystemC). This patch contains a standard compliant implementation of an external gem5 port, that enables the usage of gem5 as a TLM initiator component in SystemC based virtual platforms. Both TLM coding paradigms loosely timed (b_transport) and aproximately timed (nb_transport) are supported. Compared to the original patch a TLM memory manager was added. Furthermore, the transaction object was removed and for each TLM payload a PacketPointer that points to the original gem5 packet is added as an TLM extension. For event handling single events are now created. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-23config: enable setting SE-mode environment variables from filebpotter
2015-04-20config: Remove memory aliases and rely on class nameAndreas Hansson
Instead of maintaining two lists, rely entirely on the class name. There is really no point in causing unecessary confusion.
2015-04-08config: Support full-system with SST's memory systemCurtis Dunham
This patch adds an example configuration in ext/sst/tests/ that allows an SST/gem5 instance to simulate a 4-core AArch64 system with SST's memHierarchy components providing all the caches and memories.
2015-03-23config: Add ability to exit simulation after initializationCurtis Dunham
When using gem5 as a slave simulator, it will not advance the clock on its own and depends on the master simulator calling simulate(). This new option lets us use the Python scripts to do all the configuration while stopping short of actually simulating anything.
2015-03-19config: Specify OS type and release on command lineChris Emmons
This patch enables users to speficy --os-type on the command line. This option is used to take specific actions for an OS type, such as changing the kernel command line. This patch is part of the Android KitKat enablement.
2015-01-16config: add --root-device machine parameterCurtis Dunham
In case /dev/sda1 is not actually the boot partition for an image, we can override it on the command line or in a benchmark definition.
2014-12-23config: Expose the DRAM ranks as a command-line optionAndreas Hansson
This patch gives the user direct influence over the number of DRAM ranks to make it easier to tune the memory density without affecting the bandwidth (previously the only means of scaling the device count was through the number of channels). The patch also adds some basic sanity checks to ensure that the number of ranks is a power of two (since we rely on bit slices in the address decoding).
2014-12-23config: Add --memchecker optionMarco Elver
This patch adds the --memchecker option, to denote that a MemChecker should be instantiated for the system. The exact usage of the MemChecker depends on the system configuration. For now CacheConfig.py makes use of the option, adding MemCheckerMonitor instances between CPUs and D-Caches. Note, however, that currently this only provides limited checking on a running system; other parts of the system, such as I/O devices are not monitored, and may cause warnings to be issued by the monitor.
2014-12-23config: Add options to take/resume from SimPoint checkpointsDam Sunwoo
More documentation at http://gem5.org/Simpoints Steps to profile, generate, and use SimPoints with gem5: 1. To profile workload and generate SimPoint BBV file, use the following option: --simpoint-profile --simpoint-interval <interval length> Requires single Atomic CPU and fastmem. <interval length> is in number of instructions. 2. Generate SimPoint analysis using SimPoint 3.2 from UCSD. (SimPoint 3.2 not included with this flow.) 3. To take gem5 checkpoints based on SimPoint analysis, use the following option: --take-simpoint-checkpoint=<simpoint file path>,<weight file path>,<interval length>,<warmup length> <simpoint file> and <weight file> is generated by SimPoint analysis tool from UCSD. SimPoint 3.2 format expected. <interval length> and <warmup length> are in number of instructions. 4. To resume from gem5 SimPoint checkpoints, use the following option: --restore-simpoint-checkpoint -r <N> --checkpoint-dir <simpoint checkpoint path> <N> is (SimPoint index + 1). E.g., "-r 1" will resume from SimPoint #0.
2014-12-04config: Add two options for setting the kernel command line.Gabe Black
Both options accept template which will, through python string formatting, have "mem", "disk", and "script" values substituted in from the mdesc. Additional values can be used on a case by case basis by passing them as keyword arguments to the fillInCmdLine function. That makes it possible to have specialized parameters for a particular ISA, for instance. The first option lets you specify the template directly, and the other lets you specify a file which has the template in it.
2014-10-29arm, tests: Update config files to more recent kernels and create 64-bit ↵Ali Saidi
regressions. This changes the default ARM system to a Versatile Express-like system that supports 2GB of memory and PCI devices and updates the default kernels/file-systems for AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some platforms that are no longer supported have been pruned from the configuration files. In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-04-10config: add num-work-ids command line optionGedare Bloom
Adds the parameter --num-work-ids to Options.py and reads the parameter into the System params in Simulation.py. This parameter enables setting the number of possible work items to different than 16. Support for this parameter already exists in src/sim/System.py, so this changeset only affects the Python config files. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-03-23mem: Change memory defaults to be more representativeAndreas Hansson
Make the default memory type DDR3-1600 x64, and use the open-adaptive page policy. This change is aiming to ensure that users by default are using a realistic memory system.
2014-01-24arm: Add support for ARMv8 (AArch64 & AArch32)ARM gem5 Developers
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2013-10-17util: Streamline .apc project convertsion scriptDam Sunwoo
This Python script generates an ARM DS-5 Streamline .apc project based on gem5 run. To successfully convert, the gem5 runs needs to be run with the context-switch-based stats dump option enabled (The guest kernel also needs to be patched to allow gem5 interrogate its task information.) See help for more information.
2013-10-09config: correct example ruby scriptsNilay Vaish
A couple of recent changesets added/deleted/edited some variables that are needed for running the example ruby scripts. This changeset edits these scripts to bring them to a working state.
2013-08-19config: Command line support for multi-channel memoryAndreas Hansson
This patch adds support for specifying multi-channel memory configurations on the command line, e.g. 'se/fs.py --mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it enhances the functionality of MemConfig and moves the existing makeMultiChannel class method from SimpleDRAM to the support scripts. The se/fs.py example scripts are updated to make use of the new feature.
2013-08-19power: Add voltage domains to the clock domainsAkash Bagdia
This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-07-18Configs: Fix up maxtick and maxtimeJoel Hestness
This patch contains three fixes to max tick options handling in Options.py and Simulation.py: 1) Since the global simulator frequency isn't bound until m5.instantiate() is called, the maxtick resolution needs to happen after this call, since changes to the global frequency will cause m5.simulate() to misinterpret the maxtick value. Shuffling this also requires tweaking the checkpoint directory handling to signal the checkpoint restore tick back to run(). Fixing this completely and correctly will require storing the simulation frequency into checkpoints, which is beyond the scope of this patch. 2) The maxtick option in Options.py was defaulted to MaxTicks, so the old code would always skip over the maxtime part of the conditionals at the beginning of run(). Change the maxtick default to None, and set the maxtick local variable in run() appropriately. 3) To clarify whether max ticks settings are relative or absolute, split the maxtick option into separate options, for relative and absolute. Ensure that these two options and the maxtime option are handled appropriately to set the maxtick variable in Simulation.py.
2013-06-28configs: rearrange the available options in Options.pyNilay Vaish
It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-27config: Rename clock option to Ruby clockAkash Bagdia
This patch changes the 'clock' option to 'ruby-clock' as it is only used by Ruby.
2013-06-27config: Add a system clock command-line optionAkash Bagdia
This patch adds a 'sys_clock' command-line option and use it to assign clocks to the system during instantiation. As part of this change, the default clock in the System class is removed and whenever a system is instantiated a system clock value must be set. A default value is provided for the command-line option. The configs and tests are updated accordingly.
2013-06-27config: Add a CPU clock command-line optionAkash Bagdia
This patch adds a 'cpu_clock' command-line option and uses the value to assign clocks to components running at the CPU speed (L1 and L2 including the L2-bus). The configuration scripts are updated accordingly. The 'clock' option is left unchanged in this patch as it is still used by a number of components. In follow-on patches the latter will be disambiguated further.
2013-06-03config: Add missing CPUs to --restore-with-cpuAndreas Sandberg
The --restore-with-cpu option didn't use CpuConfig.cpu_names() to determine which CPU names are valid, instead it used a static list of known CPU names. This changeset makes the option parsing code use the CPU list from the CpuConfig module instead.
2013-04-22config: Add a mem-type config option to se/fs scriptsAndreas Hansson
This patch enables selection of the memory controller class through a mem-type command-line option. Behind the scenes, this option is treated much like the cpu-type, and a similar framework is used to resolve the valid options, and translate the short-hand description to a valid class. The regression scripts are updated with a hardcoded memory class for the moment. The best solution going forward is probably to get the memory out of the makeSystem functions, but Ruby complicates things as it does not connect the memory controller to the membus. --HG-- rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22cpu: generate SimPoint basic block vector profilesDam Sunwoo
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout folder) based on start and end addresses of basic blocks. Some comments to the original patch are addressed and hooks are added to create and resume from checkpoints based on instruction counts dictated by external SimPoint analysis tools. SimPoint creation/resuming options will be implemented as a separate patch.
2013-02-20config: Fix --prog-interval command line optionAli Saidi
2013-02-15options: add command line option for dtb fileAnthony Gutierrez
2013-02-15config: Cleanup CPU configurationAndreas Sandberg
The CPUs supported by the configuration scripts used to be hard-coded. This was not ideal for several reasons. For example, the configuration scripts depend on all CPU models even though only a subset might have been compiled. This changeset adds a new module to the configuration scripts that automatically discovers the available CPU models from the compiled SimObjects. As a nice bonus, the use of introspection allows us to automatically generate a list of available CPU models suitable for printing. This list is augmented with the Python doc string from the underlying class if available.
2012-11-19config: Fix description of checkpoint option from cycle to tickAndreas Hansson
This patch merely updates the description of the "take-checkpoints" option to reflect that it is specified in ticks and not in cycles.
2012-09-09se.py: support specifying multiple programs via command lineNilay Vaish
This patch allows for specifying multiple programs via command line. It also adds an option for specifying whether to use of SMT. But SMT does not work for the o3 cpu as of now.
2012-08-15configs: add option for repeatedly switching back-and-forth between cpu types.Anthony Gutierrez
This patch adds a --repeat-switch option that will enable repeat core switching at a user defined period (set with --switch-freq option). currently, a switch can only occur between like CPU types. inorder CPU switching is not supported. *note* this patch simply allows a config that will perform repeat switching, it does not fix drain/switchout functionality. if you run with repeat switching you will hit assertion failures and/or your workload with hang or die.
2012-05-03Config: Fix help msg for option --mem-sizeJayneel Gandhi
2012-04-16Config: Add command line options for disk image and memory sizeJayneel Gandhi
Added the options to Options.py for FS mode with backward compatibility. It is good to provide an option to specify the disk image and the memory size from command line since a lot of disk images are created to support different benchmark suites as well as per user needs. Change in program also leads to change in memory requirements. These options provide the interface to provide both disk image and memory size from the command line and gives more flexibility.
2012-03-28Config: Change the way options are addedNilay Vaish
I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-09CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectableGeoffrey Blake
Enables the CheckerCPU to be selected at runtime with the --checker option from the configs/example/fs.py and configs/example/se.py configuration files. Also merges with the SE/FS changes.
2012-03-01Config: make option ruby available alwaysNilay Vaish
2012-01-26configs: A more realistic configuration of an ARM-like processorRonald Dreslinski