summaryrefslogtreecommitdiff
path: root/configs/common
AgeCommit message (Collapse)Author
2007-01-30fix some checkpointing annoyancesAli Saidi
-m works as you think it should Ctrl-C actually ends the simulation now --HG-- extra : convert_revision : f2269dc90d165c716459ec61f5f7b1ea3c1d4ae2
2007-01-09add memory mapped disk deviceAli Saidi
configs/common/FSConfig.py: src/python/m5/objects/T1000.py: add configuration for memory mapped disk src/dev/sparc/SConscript: add memory mapped disk to sconscript --HG-- extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
2006-12-06Many more fixes for SPARC_FS. Gets us to the point where SOFTINT startsAli Saidi
getting touched. configs/common/FSConfig.py: Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs src/arch/isa_parser.py: we should readmiscregwitheffect not readmiscreg src/arch/sparc/asi.cc: Fix AsiIsNucleus spelling with respect to header file Add ASI_LSU_CONTROL_REG to AsiSiMmu src/arch/sparc/asi.hh: Fix spelling of two ASIs src/arch/sparc/isa/decoder.isa: switch back to defaults letting the isa_parser insert readMiscRegWithEffect src/arch/sparc/isa/formats/mem/util.isa: Flesh out priviledgedString with hypervisor checks Make load alternate set the flags correctly src/arch/sparc/miscregfile.cc: insert some forgotten break statements src/arch/sparc/miscregfile.hh: Add some comments to make it easier to find which misc register is which number src/arch/sparc/tlb.cc: flesh out the tlb memory mapped registers a lot more src/base/traceflags.py: add an IPR traceflag src/mem/request.hh: Fix a bad assert() in request --HG-- extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
2006-12-04More changes to get SPARC fs closer. Now at 1.2M cycles before differenceAli Saidi
configs/common/FSConfig.py: seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config. src/arch/sparc/isa/decoder.isa: change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect src/arch/sparc/miscregfile.cc: For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this). Use instruction count from cpu rather than cycles because that is what legion does we can change it back after were done with legion src/base/bitfield.hh: add a new function mbits() that just masks off bits of interest but doesn't shift src/cpu/base.cc: src/cpu/base.hh: add instruction count to cpu src/cpu/exetrace.cc: src/cpu/m5legion_interface.h: compare instruction count between legion and m5 too src/cpu/simple/atomic.cc: change asserts of packet success to if panics wrapped with NDEBUG defines so we can get some more useful information when we have a bad address src/dev/isa_fake.cc: src/dev/isa_fake.hh: src/python/m5/objects/Device.py: expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses src/python/m5/objects/System.py: convert some tabs to spaces src/python/m5/objects/T1000.py: add more fake devices for each l1 bank and each memory controller --HG-- extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-11-30Load the hypervisor symbols twice, once with an address mask so that we can ↵Ali Saidi
get symbols for where it's copied to in memory Add the ability to use an address mask for symbol loading Rather then silently failing on platform accesses panic Move BadAddr/IsaFake no Device from Tsunami Let the system kernel be none, but warn about it configs/common/FSConfig.py: We don't have a kernel for sparc yet src/arch/sparc/system.cc: Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory src/base/loader/aout_object.cc: src/base/loader/aout_object.hh: src/base/loader/ecoff_object.cc: src/base/loader/ecoff_object.hh: src/base/loader/elf_object.cc: src/base/loader/elf_object.hh: src/base/loader/object_file.hh: src/base/loader/raw_object.cc: src/base/loader/raw_object.hh: Add the ability to use an address mask for symbol loading src/dev/sparc/t1000.cc: Rather then silently failing on platform accesses panic src/dev/sparc/t1000.hh: fix up a couple of platform comments src/python/m5/objects/Bus.py: src/python/m5/objects/Device.py: src/python/m5/objects/T1000.py: src/python/m5/objects/Tsunami.py: Move BadAddr/IsaFake no Device from Tsunami src/python/m5/objects/System.py: Let kernel be none src/sim/system.cc: Let the system kernel be none, but warn about it --HG-- extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-29Merge zizzer:/bk/sparcfsGabe Black
into zower.eecs.umich.edu:/eecshome/m5/newmemmid src/arch/sparc/isa_traits.hh: src/arch/sparc/miscregfile.hh: hand merge --HG-- extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
2006-11-26Include check for making sure caches are enabled.Kevin Lim
--HG-- extra : convert_revision : e3902b065db524ebe5bf762e44a840133ccb8d75
2006-11-22Added a parameter to set memory to zero. This is to support Legion, and once ↵Gabe Black
we can make our own hypervisor binary, we probably won't need it. --HG-- extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22Merge zizzer:/bk/sparcfsGabe Black
into zower.eecs.umich.edu:/eecshome/m5/newmem --HG-- extra : convert_revision : 75f3398e38e18eb1f8248e23708d7a8d8cce0fc5
2006-11-20Add in rom/rams for the nvram, hypervisor description, and partition ↵Gabe Black
description. --HG-- extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-16Implement a single config file to encompass all of the SPECNathan Binkert
CPU2000 stuff, and use it in all of the tests that currently use SPEC --HG-- extra : convert_revision : 8cd26a597e51a90b6d2810d344a075f5aa0f011b
2006-11-16Merge zower.eecs.umich.edu:/home/gblack/m5/newmemmemopsGabe Black
into zower.eecs.umich.edu:/eecshome/m5/newmem --HG-- extra : convert_revision : 74b2352b8f088e38cd1ecf3a8233b45df0476d93
2006-11-16Fixes for SPARC_FSGabe Black
configs/common/FSConfig.py: Make a SPARC system create an IO bus. src/python/m5/objects/T1000.py: Create a T1000 platform src/arch/sparc/miscregfile.cc: Initialize the strand status register to the value legion provides. src/cpu/exetrace.cc: Truncate an ExtMachInst to a MachInst before comparing with Legion. --HG-- extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-15Add L2 cache option to fs.py --l2cacheRon Dreslinski
--HG-- extra : convert_revision : 5bdd1129c3b23e91d441e7b83f6a824ef7740fab
2006-11-10Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix --HG-- extra : convert_revision : 56cb7fe3be5b63bd89b48ac6cb88b47d13b4c137
2006-11-09Get SPARC to the point that it starts running. Add ability to load the ROM ↵Ali Saidi
bin files, cleanup lockstep printing a bit Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work. SConstruct: Add TARGET_ISA to the list of environment variables that end up in the build_env for python configs/common/FSConfig.py: add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now src/SConscript: add a raw file object, at least until we get more info about how to compile openboot properly src/arch/sparc/system.cc: src/arch/sparc/system.hh: add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM src/base/loader/object_file.cc: src/base/loader/object_file.hh: add option to try raw when nothing works src/cpu/exetrace.cc: cleanup lockstep printing a little bit src/cpu/m5legion_interface.h: change the instruction to be 32 bits because it is src/mem/physical.cc: fix assert that doesn't work if memory starts somewhere above 0 src/python/m5/objects/BaseCPU.py: Add if statement to choose between sparc tlbs and alpha tlbs src/python/m5/objects/System.py: Add a sparc system that sets the rom addresses correctly src/python/m5/params.py: add the ability to add Addr() together --HG-- extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix --HG-- extra : convert_revision : dafe2d4a032b277c219ea13faf20567c20c1f2f4
2006-11-09Clean up config scripts to not have to worry about attaching a cache only to ↵Kevin Lim
the TimingCPU. Now the Atomic CPU works with caches. configs/common/Simulation.py: Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU. However the O3CPU must always use caches, so a check for that must still exist. Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU. configs/example/fs.py: configs/example/se.py: Atomic CPU now handles caches. --HG-- extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
2006-11-08simplify maxtick parsing in both the python and the c++.Lisa Hsu
configs/common/Simulation.py: simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick. src/python/m5/__init__.py: make a new m5 param called MaxTick. src/sim/host.hh: fix the M5 def. of MaxTick src/sim/main.cc: Simplify the MaxTick/num_cycles parsing within main.cc --HG-- extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
2006-11-08make rcS files read from the m5 source directory, not /dist.Lisa Hsu
--HG-- extra : convert_revision : 45a2dbf5b05b19dd60fbc3a5b10e9355c8351e3b
2006-11-08change to os.path.join like nate wanted.Lisa Hsu
--HG-- extra : convert_revision : 6e8a0153adf04f0cc07904434e4cb6a83fe900eb
2006-11-01factor some more commone code and enable going from checkpoint into ↵Lisa Hsu
arbitrary CPU with or without caches. configs/common/Simulation.py: enable going from checkpoint into arbitrary CPU with or without caches. --HG-- extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
2006-11-01make it so that you can do a standard switch without the caches option. ↵Lisa Hsu
this will have only the o3 cpu have a cache, rather than timing (warmup) + o3 have cache. --HG-- extra : convert_revision : d733de7ebb362bbd7376a0235ee7f117df2d6d37
2006-11-01change name of 2nd switch_cpu so that ckpt recovery with multiple cpus ↵Lisa Hsu
doens't get confused. --HG-- extra : convert_revision : 16c710c4196c520d03c1993a26f38cf1f04ab637
2006-10-31Fix up configs.Kevin Lim
configs/common/Simulation.py: Remove mem parameter. configs/example/se.py: Remove debug output that got included in my other push. --HG-- extra : convert_revision : 643c34147f6c6cbb98b8e6d6e8206b9859593ab0
2006-10-30FSConfig.py:Lisa Hsu
Accidentally committed this last time configs/common/FSConfig.py: Accidentally committed this last time --HG-- extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
2006-10-30se.py, fs.py:Lisa Hsu
import Caches Simulation.py: Fix typo - L2Cache --> L1Cache configs/common/Simulation.py: Fix typo - L2Cache --> L1Cache configs/example/fs.py: configs/example/se.py: import Caches --HG-- extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30ensure that there is a "/" between the cptdir and the cpt.%d.Lisa Hsu
--HG-- extra : convert_revision : 9aed7c3aecad10b039f3cfb26e04a7950be6bed1
2006-10-30decouple the switch option from the warmup period option - parsing was ↵Lisa Hsu
confused otherwise, oops. --HG-- extra : convert_revision : 951fc664c59363df5f5e026aa791d83c26f050ec
2006-10-30add some comments and make the warmup period in a switchover parameterizable.Lisa Hsu
configs/common/Options.py: make the warmup period in a standard switch part of the option. configs/common/Simulation.py: add some comments and also make the warmup period an option. --HG-- extra : convert_revision : 0fa587291b97ff87c3b3a617e7359ac6d9bed7a5
2006-10-27factor out common run code from se.py and fs.py.Lisa Hsu
configs/example/fs.py: factor out common code. configs/example/se.py: factor out common code --HG-- extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-22Add mutex test to Benchmarks.py.Steve Reinhardt
--HG-- extra : convert_revision : 9b4f1ce9a181ac5a01e5b6a68067079969dfe9ce
2006-10-17Rename 'Machine' to 'SysConfig'.Steve Reinhardt
Clean up a little. --HG-- extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-10Two minor fixes.Kevin Lim
configs/common/SysPaths.py: Undo accidental change. src/SConscript: Fix. --HG-- extra : convert_revision : 665b186cff7d8ae560601ced7ae407a41a16cfea
2006-10-08Clean up configs.Kevin Lim
configs/common/FSConfig.py: configs/common/SysPaths.py: configs/example/fs.py: configs/example/se.py: tests/configs/o3-timing-mp.py: tests/configs/o3-timing.py: Clean up configs by removing FullO3Config and instead using default values. src/python/m5/objects/FUPool.py: Add in default FUPool. src/python/m5/objects/O3CPU.py: Use defaults better. Also set checker parameters, and fix up a config bug. --HG-- extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-09-11Merge zizzer:/bk/newmemAli Saidi
into zeep.pool:/z/saidi/work/m5.newmem.head --HG-- extra : convert_revision : 14ac24236ff65b7e489c1ce4b4e9a295966013b8
2006-09-11add annotation code to m5Ali Saidi
configs/common/Benchmarks.py: add annotate test app src/SConscript: add annotate.cc to lis src/arch/alpha/isa/decoder.isa: add annotate instructions src/base/traceflags.py: Add annotate trace flag src/sim/pseudo_inst.cc: src/sim/pseudo_inst.hh: add annotate pseudo ops util/m5/m5op.S: util/m5/m5op.h: add anotate ops --HG-- extra : convert_revision : 7f965c0d84e41ce34f2ec8ec27a009276d67d8d6
2006-09-05Enable proxies (Self/Parent) for specifying ports.Steve Reinhardt
Significant revamp of Port code. Some cleanup of SimObject code too, particularly to make the SimObject and MetaSimObject implementations of __setattr__ more consistent. Unproxy code split out of print_ini(). src/python/m5/multidict.py: Make get() return None by default, to match semantics of built-in dictionary objects. --HG-- extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
2006-08-16add etherdump file optionAli Saidi
--HG-- extra : convert_revision : 6b62398778208bc4e64582e06fb73b71a94f3014
2006-08-16Finish test clean-up & reorg.Steve Reinhardt
configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16More restructuring of regression tests.Steve Reinhardt
Moving work back to zizzer... configs/common/FSConfig.py: configs/test/fs.py: Move CPU connections out of makeLinuxAlphaSystem() src/python/m5/objects/BaseCPU.py: Create default TLBs in full system. Move utility cache functions here. src/python/m5/objects/O3CPU.py: Add _mem_ports tests/run.py: Add binpath() Change maxtick default to 'forever' tests/simple-atomic.py: Use connectmemPorts() tests/simple-timing.py: Fix up. --HG-- rename : tests/quick/eio1/ref/alpha/eio/detailed/config.ini => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.ini rename : tests/quick/eio1/ref/alpha/eio/detailed/config.out => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.out rename : tests/quick/eio1/ref/alpha/eio/detailed/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/detailed/m5stats.txt rename : tests/quick/eio1/ref/alpha/eio/detailed/stderr => tests/quick/20.eio-short/ref/alpha/eio/detailed/stderr rename : tests/quick/eio1/ref/alpha/eio/detailed/stdout => tests/quick/20.eio-short/ref/alpha/eio/detailed/stdout rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.ini rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.out rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/m5stats.txt rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stderr rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stdout rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.ini rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.out rename : tests/quick/eio1/ref/alpha/eio/simple-timing/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/m5stats.txt rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stderr rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stdout rename : tests/quick/eio1/test.py => tests/quick/20.eio-short/test.py rename : configs/test/hello => tests/test-progs/hello/bin/alpha/linux/hello rename : configs/test/hello_mips => tests/test-progs/hello/bin/mips/linux/hello_mips rename : configs/test/sparc_tests/hello_sparc => tests/test-progs/hello/bin/sparc/bin extra : convert_revision : 1f891392ecc11ffcc3b3182fa673c401c0efc8a5
2006-08-15implement benchmark selection codeAli Saidi
--HG-- extra : convert_revision : 84632fdad7019e177e61c56ae30ea2f3fdbc0995
2006-07-27Clean up some more config stuff.Kevin Lim
configs/common/FSConfig.py: Clean up some code to make functions look less like classes. Also put makeList function (formerly listWrapper) into m5 itself. configs/test/fs.py: Update for changed code. src/python/m5/__init__.py: Put makeList into m5. --HG-- extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
2006-07-22Last minute check in. Very few functional changes other than some minor ↵Kevin Lim
config updates. Also include some recently generated stats. SConstruct: Make test CPUs option non-sticky. configs/common/FSConfig.py: Be sure to set the memory mode. configs/test/fs.py: Wrong string. tests/SConscript: Only test valid CPUs that have been compiled in. tests/test1/ref/alpha/atomic/config.ini: tests/test1/ref/alpha/atomic/config.out: tests/test1/ref/alpha/atomic/m5stats.txt: tests/test1/ref/alpha/atomic/stdout: tests/test1/ref/alpha/detailed/config.ini: tests/test1/ref/alpha/detailed/config.out: tests/test1/ref/alpha/detailed/m5stats.txt: tests/test1/ref/alpha/detailed/stdout: tests/test1/ref/alpha/timing/config.ini: tests/test1/ref/alpha/timing/config.out: tests/test1/ref/alpha/timing/m5stats.txt: tests/test1/ref/alpha/timing/stdout: Update output. --HG-- extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
2006-07-21Rearrange the FS configs to be more shared. Also check in the full-system ↵Kevin Lim
tests. Reference stats coming soon. configs/test/fs.py: Pull out a lot of common code and put it into configs/common/FSConfig.py. --HG-- extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
2006-07-21Some reorganization. Options are all handled at the user level script. ↵Kevin Lim
Move createCpus function (now called connectCpu) to Util.py, where it can be used by other configs. --HG-- rename : configs/test/SysPaths.py => configs/common/SysPaths.py extra : convert_revision : 2b1b95c5f29e7ade08b1abd6f24c129d600fe2e8
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 12:56:40 +0000