summaryrefslogtreecommitdiff
path: root/configs/example/fs.py
AgeCommit message (Collapse)Author
2011-02-23ARM: Clarifies creation of Linux and baremetal ARM systems.Ali Saidi
makeArmSystem creates both bare-metal and Linux systems more cleanly. machine_type was never optional though listed as an optional argument; a system such as "RealView_PBX" must now be explicitly specified. Now that it is a required argument, the placement of the arguments has changed slightly requiring some changes to calls that create ARM systems.
2011-02-07X86, Config: Move the setting of work count options to a separate function.Gabe Black
This way things that don't care about work count options and/or aren't called by something that has those command line options set up doesn't have to build a fake object to carry in inert values.
2011-02-06m5: added work completed monitoring supportBrad Beckmann
2011-02-03Mem,X86: Make the IO bridge pass APIC messages back towards the CPU.Gabe Black
2011-02-03Config: Keep track of uncached and cached ports separately.Gabe Black
This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-01-19Time: Add a mechanism to prevent M5 from running faster than real time.Gabe Black
M5 skips over any simulated time where it doesn't have any work to do. When the simulation is active, the time skipped is short and the work done at any point in time is relatively substantial. If the time between events is long and/or the work to do at each event is small, it's possible for simulated time to pass faster than real time. When running a benchmark that can be good because it means the simulation will finish sooner in real time. When interacting with the real world through, for instance, a serial terminal or bridge to a real network, this can be a problem. Human or network response time could be greatly exagerated from the perspective of the simulation and make simulated events happen "too soon" from an external perspective. This change adds the capability to force the simulation to run no faster than real time. It does so by scheduling a periodic event that checks to see if its simulated period is shorter than its real period. If it is, it stalls the simulation until they're equal. This is called time syncing. A future change could add pseudo instructions which turn time syncing on and off from within the simulation. That would allow time syncing to be used for the interactive parts of a session but then turned off when running a benchmark using the m5 utility program inside a script. Time syncing would probably not happen anyway while running a benchmark because there would be plenty of work for M5 to do, but the event overhead could be avoided.
2010-08-23ARM: Add configuration for Linux/Full SystemAli Saidi
2010-02-27Config: Fix fs.py's call to CacheConfig.config_cache.Gabe Black
2010-02-25configs: pull out cache configuration code from se.py and fs.py.Lisa Hsu
Most of these frontend configurations share cache configuration code, pull it out so that changes to caches don't have to require changing multiple config files.
2009-09-22python: Move more code into m5.util allow SCons to use that code.Nathan Binkert
Get rid of misc.py and just stick misc things in __init__.py Move utility functions out of SCons files and into m5.util Move utility type stuff from m5/__init__.py to m5/util/__init__.py Remove buildEnv from m5 and allow access only from m5.defines Rename AddToPath to addToPath while we're moving it to m5.util Rename read_command to readCommand while we're moving it Rename compare_versions to compareVersions while we're moving it. --HG-- rename : src/python/m5/convert.py => src/python/m5/util/convert.py rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-14Add an I/O cache to FS config even if there's just an "L2" cache.Steve Reinhardt
2009-04-26X86, Config: Make makeX86System consider the number of CPUs, and clean up ↵Gabe Black
interrupt assignment.
2008-07-16mem: use single BadAddr responder per system.Steve Reinhardt
Previously there was one per bus, which caused some coherence problems when more than one decided to respond. Now there is just one on the main memory bus. The default bus responder on all other buses is now the downstream cache's cpu_side port. Caches no longer need to do address range filtering; instead, we just have a simple flag to prevent snoops from propagating to the I/O bus.
2009-01-30Errors: Print a URL with a hash of the format string to find more ↵Ali Saidi
information about an error.
2008-06-13Scripts: Check for the appropriate build type as soon as possible.Ali Saidi
2007-12-01X86: Move startup code to the system object to initialize a Linux system.Gabe Black
--HG-- extra : convert_revision : a4796c79f41aa8b8f38bf2f628bee8f1b3af64be
2007-11-15fix MIPS headersKorey Sewell
--HG-- extra : convert_revision : 2870a146a1be0e8c80878090f39c0eaa15d2eb13
2007-11-13Add in files from merge-bare-iron, get them compiling in FS and SE modeKorey Sewell
--HG-- extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-10-08Configuration: Move iocache outside of processors loop so it works for MP ↵Ali Saidi
systems --HG-- extra : convert_revision : 0ba563555a94eb22a6d4e402388e75e70d3556c2
2007-10-07X86: Adjust the config scripts for x86 fs.Gabe Black
--HG-- extra : convert_revision : 36ed22b50066f54be0e51c3419babc07dd218e10
2007-08-08Added fastmem option.Vincentius Robby
Lets CPU accesses to physical memory bypass Bus. --HG-- extra : convert_revision : e56e3879de47ee10951a19bfcd8b62b6acdfb30c
2007-08-10DMA: Add IOCache and fix bus bridge to optionally only send requests oneAli Saidi
way so a cache can handle partial block requests for i/o devices. --HG-- extra : convert_revision : a68b5ae826731bc87ed93eb7ef326a2393053964
2007-08-01Configuration: Update the drive systems kernel as well as the testsys kernel ↵Ali Saidi
with cmd line option. --HG-- extra : convert_revision : 5dfb0db65452c0b7aa3e2dc2a0209e3f8e23811f
2007-05-15add an l2 cache option to se example configAli Saidi
configs/common/Options.py: configs/example/fs.py: move l2 cache option to Options.py --HG-- extra : convert_revision : 5c0071c2827f7db6d56229d5276326364b50f0c8
2007-03-06Move all of the parameters of the Root SimObject so they areNathan Binkert
directly configured by python. Move stuff from root.(cc|hh) to core.(cc|hh) since it really belogs there now. In the process, simplify how ticks are used in the python code. --HG-- extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
2007-01-03Merge zizzer:/bk/newmemGabe Black
into zower.eecs.umich.edu:/eecshome/m5/newmem --HG-- extra : convert_revision : f4a05accb8fa24d425dd818b1b7f268378180e99
2006-12-22Add options for setting the kernel to run and theNathan Binkert
script to run --HG-- extra : convert_revision : 32ad8e08ca74edf042d8606ca4876cbe1193e932
2006-12-04automatically build sparc system or alpha system.Lisa Hsu
configs/example/fs.py: make it an automatic system build for alpha vs. sparc. --HG-- extra : convert_revision : 4c217cf9309c6209be7f80e358f6640857a785e8
2006-11-15Add L2 cache option to fs.py --l2cacheRon Dreslinski
--HG-- extra : convert_revision : 5bdd1129c3b23e91d441e7b83f6a824ef7740fab
2006-11-09Clean up config scripts to not have to worry about attaching a cache only to ↵Kevin Lim
the TimingCPU. Now the Atomic CPU works with caches. configs/common/Simulation.py: Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU. However the O3CPU must always use caches, so a check for that must still exist. Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU. configs/example/fs.py: configs/example/se.py: Atomic CPU now handles caches. --HG-- extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
2006-11-01factor some more commone code and enable going from checkpoint into ↵Lisa Hsu
arbitrary CPU with or without caches. configs/common/Simulation.py: enable going from checkpoint into arbitrary CPU with or without caches. --HG-- extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
2006-10-31Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix configs/example/fs.py: configs/example/se.py: src/mem/tport.hh: Hand merge. --HG-- extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
2006-10-31Remove mem parameter. Now the translating port asks the CPU's dcache's peer ↵Kevin Lim
for its MemObject instead of having to have a paramter for the MemObject. configs/example/fs.py: configs/example/se.py: src/cpu/simple/base.cc: src/cpu/simple/base.hh: src/cpu/simple/timing.cc: src/cpu/simple_thread.cc: src/cpu/simple_thread.hh: src/cpu/thread_state.cc: src/cpu/thread_state.hh: tests/configs/o3-timing-mp.py: tests/configs/o3-timing.py: tests/configs/simple-atomic-mp.py: tests/configs/simple-atomic.py: tests/configs/simple-timing-mp.py: tests/configs/simple-timing.py: tests/configs/tsunami-simple-atomic-dual.py: tests/configs/tsunami-simple-atomic.py: tests/configs/tsunami-simple-timing-dual.py: tests/configs/tsunami-simple-timing.py: No need for mem parameter any more. src/cpu/checker/cpu.cc: Use new constructor for simple thread (no more MemObject parameter). src/cpu/checker/cpu.hh: Remove MemObject parameter. src/cpu/memtest/memtest.hh: Ports now take in their MemObject owner. src/cpu/o3/alpha/cpu_builder.cc: Remove mem parameter. src/cpu/o3/alpha/cpu_impl.hh: Remove memory parameter and clean up handling of TranslatingPort. src/cpu/o3/cpu.cc: src/cpu/o3/cpu.hh: src/cpu/o3/fetch.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/mips/cpu_builder.cc: src/cpu/o3/mips/cpu_impl.hh: src/cpu/o3/params.hh: src/cpu/o3/thread_state.hh: src/cpu/ozone/cpu.hh: src/cpu/ozone/cpu_builder.cc: src/cpu/ozone/cpu_impl.hh: src/cpu/ozone/front_end.hh: src/cpu/ozone/front_end_impl.hh: src/cpu/ozone/lw_lsq.hh: src/cpu/ozone/lw_lsq_impl.hh: src/cpu/ozone/simple_params.hh: src/cpu/ozone/thread_state.hh: src/cpu/simple/atomic.cc: Remove memory parameter. --HG-- extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
2006-10-30se.py, fs.py:Lisa Hsu
import Caches Simulation.py: Fix typo - L2Cache --> L1Cache configs/common/Simulation.py: Fix typo - L2Cache --> L1Cache configs/example/fs.py: configs/example/se.py: import Caches --HG-- extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30Use some python os.path stuff to make it more flexible where we can execute ↵Kevin Lim
this script from. --HG-- extra : convert_revision : a76861a0f2669a7cd3bf3a34177739c69a913545
2006-10-27factor out common run code from se.py and fs.py.Lisa Hsu
configs/example/fs.py: factor out common code. configs/example/se.py: factor out common code --HG-- extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-24Fix fs.py. Lisa did you test this? Is there some wierd python version thing?Ali Saidi
--HG-- extra : convert_revision : 6df5f90d5b66e7af27d4f524744b9dc3c703a588
2006-10-23warmup of 1B cpu cycles.Lisa Hsu
configs/example/fs.py: configs/example/se.py: warm up of 1B CPU cycles --HG-- extra : convert_revision : 0f3263f466fde4cd86e0663930e83617a6b3faad
2006-10-23Merge zizzer:/bk/newmemLisa Hsu
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem --HG-- extra : convert_revision : bb58679e101570d50c040519fb08ffbabfee7416
2006-10-23changes regarding fs.pyLisa Hsu
1) rearrange the options to be in a nice logical order 2) add an option for what i call "standard switch", which is from simple->timing->detailed 3) change the client/server naming system to testsys/drivesys 4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries. 5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first doesn't fully work because of a caching issue, but the python side of things i think should work - the counterpart of se.py does work. i think i should factor out a lot of the common code in both, but i'll do that after this checkin, just to get this in the tree. configs/example/fs.py: 1) rearrange the options to be in a nice logical order 2) add an option for what i call "standard switch", which is from simple->timing->detailed 3) change the client/server naming system to testsys/drivesys 4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries. 5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first --HG-- extra : convert_revision : 078e22800ff83f6e950bf5cc6fb16a98320e7c51
2006-10-19First cut at LL/SC support in caches (atomic mode only).Steve Reinhardt
configs/example/fs.py: Add MOESI protocol to caches (uni coherence not quite working w/FS yet). --HG-- extra : convert_revision : 7bef7d9c5b24bf7241cc810df692408837b06b86
2006-10-17Add --caches option to add caches to server CPUs.Steve Reinhardt
--HG-- extra : convert_revision : 6aa97dcc807e175215e73c638faf73be926d4cd4
2006-10-17Enable MP systems via cmd-line flag in fs.py.Steve Reinhardt
configs/example/fs.py: Add flag for MP server systems. src/python/m5/objects/AlphaConsole.py: src/python/m5/objects/IntrControl.py: Change CPU from 'any' to 'cpu[0]' to work better with MP sytems. tests/configs/tsunami-simple-atomic-dual.py: tests/configs/tsunami-simple-timing-dual.py: Don't need to set console & intrcontrol cpu params anymore (default is fixed now). --HG-- extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
2006-10-17Rename 'Machine' to 'SysConfig'.Steve Reinhardt
Clean up a little. --HG-- extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-09Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: src/cpu/simple/timing.hh: tests/configs/o3-timing-mp.py: Hand merge. --HG-- extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
2006-10-09add in checkpoint restoration option, you can restore a checkpoint by giving ↵Lisa Hsu
a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N. the default checkpoint directory is the cwd. so you can restore by a command line like this: m5.opt fs.py --checkpoint_dir="/my/ckpt/dir" -c 3 configs/example/fs.py: add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N. --HG-- extra : convert_revision : bf9c8d3265a3875cdfb6a878005baa7ae29af90d
2006-10-08Set cpu_id params (required by ll/sc code now).Steve Reinhardt
--HG-- extra : convert_revision : e0f7ccbeccca191a8edb54494d2b4f9369e9914c
2006-10-08Clean up configs.Kevin Lim
configs/common/FSConfig.py: configs/common/SysPaths.py: configs/example/fs.py: configs/example/se.py: tests/configs/o3-timing-mp.py: tests/configs/o3-timing.py: Clean up configs by removing FullO3Config and instead using default values. src/python/m5/objects/FUPool.py: Add in default FUPool. src/python/m5/objects/O3CPU.py: Use defaults better. Also set checker parameters, and fix up a config bug. --HG-- extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-10-06add an option for defining a directory in which to place all your ↵Lisa Hsu
checkpoints. if none, default is cwd. --HG-- extra : convert_revision : 23a602c2d800c922346c9743cc0c583d178a0ee7
2006-10-05fix the argument to m5.simulate() on a checkpoint.Lisa Hsu
src/sim/stat_control.cc: add curTick to reset stats printf. --HG-- extra : convert_revision : da8cf5921e81b73f47d6831d539ca1fbdace3d1d
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 06:54:45 +0000