summaryrefslogtreecommitdiff
path: root/configs/example
AgeCommit message (Collapse)Author
2011-02-23ARM: Clarifies creation of Linux and baremetal ARM systems.Ali Saidi
makeArmSystem creates both bare-metal and Linux systems more cleanly. machine_type was never optional though listed as an optional argument; a system such as "RealView_PBX" must now be explicitly specified. Now that it is a required argument, the placement of the arguments has changed slightly requiring some changes to calls that create ARM systems.
2011-02-08memtest: due to contention increase, increased deadlock thresholdBrad Beckmann
2011-02-08config: fixed minor bug connecting dma devices to rubyBrad Beckmann
2011-02-07X86, Config: Move the setting of work count options to a separate function.Gabe Black
This way things that don't care about work count options and/or aren't called by something that has those command line options set up doesn't have to build a fake object to carry in inert values.
2011-02-06m5: added work completed monitoring supportBrad Beckmann
2011-02-06ruby: x86 fs config supportBrad Beckmann
2011-02-03Mem,X86: Make the IO bridge pass APIC messages back towards the CPU.Gabe Black
2011-02-03Config: Keep track of uncached and cached ports separately.Gabe Black
This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-01-19Time: Add a mechanism to prevent M5 from running faster than real time.Gabe Black
M5 skips over any simulated time where it doesn't have any work to do. When the simulation is active, the time skipped is short and the work done at any point in time is relatively substantial. If the time between events is long and/or the work to do at each event is small, it's possible for simulated time to pass faster than real time. When running a benchmark that can be good because it means the simulation will finish sooner in real time. When interacting with the real world through, for instance, a serial terminal or bridge to a real network, this can be a problem. Human or network response time could be greatly exagerated from the perspective of the simulation and make simulated events happen "too soon" from an external perspective. This change adds the capability to force the simulation to run no faster than real time. It does so by scheduling a periodic event that checks to see if its simulated period is shorter than its real period. If it is, it stalls the simulation until they're equal. This is called time syncing. A future change could add pseudo instructions which turn time syncing on and off from within the simulation. That would allow time syncing to be used for the interactive parts of a session but then turned off when running a benchmark using the m5 utility program inside a script. Time syncing would probably not happen anyway while running a benchmark because there would be plenty of work for M5 to do, but the event overhead could be avoided.
2010-12-07Configs: Automatically choose the correct hello world binary.Ali Saidi
2010-08-25memtest: scale associativity and mshrs according to configSteve Reinhardt
Use the actual fanouts in the tree specification to scale cache associativity and mshrs instead of dumb constants.
2010-08-24config: changed ruby config file names to be consistentBrad Beckmann
2010-08-24config: remove ruby's requirement on the timing cmd line paramBrad Beckmann
Since ruby only works in timing mode, explicitly requiring the timing cmd line param to be specified is not necessary.
2010-08-24config: fixed ruby dma device connectionsBrad Beckmann
2010-08-24testers: move testers to a new directoryBrad Beckmann
This patch moves the testers to a new subdirectory under src/cpu and includes the necessary fixes to work with latest m5 initialization patches. --HG-- rename : configs/example/determ_test.py => configs/example/ruby_direct_test.py rename : src/cpu/directedtest/DirectedGenerator.cc => src/cpu/testers/directedtest/DirectedGenerator.cc rename : src/cpu/directedtest/DirectedGenerator.hh => src/cpu/testers/directedtest/DirectedGenerator.hh rename : src/cpu/directedtest/InvalidateGenerator.cc => src/cpu/testers/directedtest/InvalidateGenerator.cc rename : src/cpu/directedtest/InvalidateGenerator.hh => src/cpu/testers/directedtest/InvalidateGenerator.hh rename : src/cpu/directedtest/RubyDirectedTester.cc => src/cpu/testers/directedtest/RubyDirectedTester.cc rename : src/cpu/directedtest/RubyDirectedTester.hh => src/cpu/testers/directedtest/RubyDirectedTester.hh rename : src/cpu/directedtest/RubyDirectedTester.py => src/cpu/testers/directedtest/RubyDirectedTester.py rename : src/cpu/directedtest/SConscript => src/cpu/testers/directedtest/SConscript rename : src/cpu/directedtest/SeriesRequestGenerator.cc => src/cpu/testers/directedtest/SeriesRequestGenerator.cc rename : src/cpu/directedtest/SeriesRequestGenerator.hh => src/cpu/testers/directedtest/SeriesRequestGenerator.hh rename : src/cpu/memtest/MemTest.py => src/cpu/testers/memtest/MemTest.py rename : src/cpu/memtest/SConscript => src/cpu/testers/memtest/SConscript rename : src/cpu/memtest/memtest.cc => src/cpu/testers/memtest/memtest.cc rename : src/cpu/memtest/memtest.hh => src/cpu/testers/memtest/memtest.hh rename : src/cpu/rubytest/Check.cc => src/cpu/testers/rubytest/Check.cc rename : src/cpu/rubytest/Check.hh => src/cpu/testers/rubytest/Check.hh rename : src/cpu/rubytest/CheckTable.cc => src/cpu/testers/rubytest/CheckTable.cc rename : src/cpu/rubytest/CheckTable.hh => src/cpu/testers/rubytest/CheckTable.hh rename : src/cpu/rubytest/RubyTester.cc => src/cpu/testers/rubytest/RubyTester.cc rename : src/cpu/rubytest/RubyTester.hh => src/cpu/testers/rubytest/RubyTester.hh rename : src/cpu/rubytest/RubyTester.py => src/cpu/testers/rubytest/RubyTester.py rename : src/cpu/rubytest/SConscript => src/cpu/testers/rubytest/SConscript
2010-08-23ARM: Add configuration for Linux/Full SystemAli Saidi
2010-08-20ruby: Resurrected Ruby's deterministic testsBrad Beckmann
Added the request series and invalidate deterministic tests as new cpu models and removed the no longer needed ruby tests --HG-- rename : configs/example/rubytest.py => configs/example/determ_test.py rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/DirectedGenerator.cc rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/DirectedGenerator.hh rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/InvalidateGenerator.cc rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/InvalidateGenerator.hh rename : src/cpu/rubytest/RubyTester.cc => src/cpu/directedtest/RubyDirectedTester.cc rename : src/cpu/rubytest/RubyTester.hh => src/cpu/directedtest/RubyDirectedTester.hh rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/SeriesRequestGenerator.cc rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/SeriesRequestGenerator.hh
2010-08-20ruby: Reduced ruby latenciesBrad Beckmann
The previous slower ruby latencies created a mismatch between the faster M5 cpu models and the much slower ruby memory system. Specifically smp interrupts were much slower and infrequent, as well as cpus moving in and out of spin locks. The result was many cpus were idle for large periods of time. These changes fix the latency mismatch.
2010-08-20memtest: Memtester support for DMABrad Beckmann
This patch adds DMA testing to the Memtester and is inherits many changes from Polina's old tester_dma_extension patch. Since Ruby does not work in atomic mode, the atomic mode options are removed.
2010-08-20config: Improve ruby simobject namesBrad Beckmann
This patch attaches ruby objects to the system before the topology is created so that their simobject names read their meaningful variable names instead of their topology name.
2010-08-20config: reorganized how ruby specifies command-line optionsBrad Beckmann
2010-08-17sim: make Python Root object a singletonSteve Reinhardt
Enforce that the Python Root SimObject is instantiated only once. The C++ Root object already panics if more than one is created. This change avoids the need to track what the root object is, since it's available from Root.getInstance() (if it exists). It's now redundant to have the user pass the root object to functions like instantiate(), checkpoint(), and restoreCheckpoint(), so that arg is gone. Users who use configs/common/Simulate.py should not notice.
2010-03-21ruby: removed ruby.config from configs/exampleBrad Beckmann
2010-03-21ruby: fixed how ruby_fs creates phsyical memoryBrad Beckmann
Now ruby_fs creates physical memory of the right size.
2010-02-27Config: Fix fs.py's call to CacheConfig.config_cache.Gabe Black
2010-02-25configs: pull out cache configuration code from se.py and fs.py.Lisa Hsu
Most of these frontend configurations share cache configuration code, pull it out so that changes to caches don't have to require changing multiple config files.
2010-02-23cache: Make caches sharing aware and add occupancy stats.Lisa Hsu
On the config end, if a shared L2 is created for the system, it is parameterized to have n sharers as defined by option.num_cpus. In addition to making the cache sharing aware so that discriminating tag policies can make use of context_ids to make decisions, I added an occupancy AverageStat and an occ % stat to each cache so that you could know which contexts are occupying how much cache on average, both in terms of blocks and percentage. Note that since devices have context_id -1, having an array of occ stats that correspond to each context_id will break here, so in FS mode I add an extra bucket for device blocks. This bucket is explicitly not added in SE mode in order to not only avoid ugliness in the stats.txt file, but to avoid broken stats (some formulas break when a bucket is 0).
2010-01-29ruby: ruby_se.py updated to new config systemBrad Beckmann
2010-01-29ruby: memtest-ruby updated to the new config systemBrad Beckmann
2010-01-29ruby: convert to M5 MemorySizeBrad Beckmann
Converted both ruby caches and directory memory to use the M5 MemorySize python type.
2010-01-29ruby: added the GEMS ruby testerBrad Beckmann
2010-01-29ruby: FS support using the new configuration systemBrad Beckmann
2010-01-29ruby: reorganized ruby python configurationBrad Beckmann
Reorganized ruby python configuration so that protocol and ruby memory system configuration code can be shared by multiple front-end configuration files (i.e. memory tester, full system, and hopefully the regression tester). This code works for memory tester, but have not tested fs mode.
2010-01-29ruby: Memory Controller Profiler with new config systemBrad Beckmann
This patch includes a rather substantial change to the memory controller profiler in order to work with the new configuration system. Most noteably, the mem_cntrl_profiler no longer uses a string map, but instead a vector. Eventually this support should be removed from the main profiler and go into a separate object. Each memory controller should have a pointer to that new mem_cntrl profile object.
2010-01-29ruby: Converted MOESI_hammer dma cntrl to new config systemBrad Beckmann
2010-01-29ruby: Added the cache profiler to the new config systemBrad Beckmann
2010-01-29ruby: Added clock to ruby systemBrad Beckmann
As a first step to migrate ruby to the M5 eventqueue, added a clock variable to the ruby system.
2010-01-29ruby: Ruby changes required to use the python config systemBrad Beckmann
This patch includes the necessary changes to connect ruby objects using the python configuration system. Mainly it consists of removing unnecessary ruby object pointers and connecting the necessary object pointers using the generated param objects. This patch includes the slicc changes necessary to connect generated ruby objects together using the python configuraiton system.
2010-01-29ruby: connects sm queues to the networkBrad Beckmann
2010-01-29ruby: Calculate system total memory capacity in PythonSteve Reinhardt
rather than in RubySystem object.
2010-01-29ruby: Add support for generating topologies in Python.Steve Reinhardt
2010-01-29ruby: Convert most Ruby objects to M5 SimObjects.Steve Reinhardt
The necessary companion conversion of Ruby objects generated by SLICC are converted to M5 SimObjects in the following patch, so this patch alone does not compile. Conversion of Garnet network models is also handled in a separate patch; that code is temporarily disabled from compiling to allow testing of interim code.
2009-11-18m5: improvements to the ruby_fs.py fileBrad Beckmann
2009-11-18ruby: included ruby config parameter ports per coreBrad Beckmann
Slightly improved the major hack need to correctly assign the number of ports per core. CPUs have two ports: icache + dcache. MemTester has one port.
2009-11-18ruby: Support for merging ALPHA_FS and rubyBrad Beckmann
Connects M5 cpu and dma ports directly to ruby sequencers and dma sequencers. Rubymem also includes a pio port so that pio requests and be forwarded to a special pio bus connecting to device pio ports.
2009-11-18ruby: Ruby memtest python script.Brad Beckmann
2009-10-16removed libruby file reference from ruby_se.pyBrad Beckmann
2009-09-22python: Move more code into m5.util allow SCons to use that code.Nathan Binkert
Get rid of misc.py and just stick misc things in __init__.py Move utility functions out of SCons files and into m5.util Move utility type stuff from m5/__init__.py to m5/util/__init__.py Remove buildEnv from m5 and allow access only from m5.defines Rename AddToPath to addToPath while we're moving it to m5.util Rename read_command to readCommand while we're moving it Rename compare_versions to compareVersions while we're moving it. --HG-- rename : src/python/m5/convert.py => src/python/m5/util/convert.py rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-16inorder-configs: update se.pyKorey Sewell
fix bug with 'numThreads=len(workloads)' which was counting characters of command-line not counting threads as intended. Update numThreads for inorder/o3 cases and default to 1 for all other cases.
2009-09-14Add an I/O cache to FS config even if there's just an "L2" cache.Steve Reinhardt
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 14:55:32 +0000