summaryrefslogtreecommitdiff
path: root/configs/example
AgeCommit message (Collapse)Author
2014-09-01ruby: Fixes clock domains in configuration filesEmilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
This patch fixes scripts related to ruby by adding the ruby clock domain. Now the L1 controllers and the Sequencer shares the cpu clock domain, while the rest of the components use the ruby clock domain. Before this patch, running simulations with the cpu clock set at 2GHz or 1GHz will output the same time results and could distort power measurements. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-08-10config: Fix cache latency param in mem testRadhika Jagtap
This patch fixes the cache latency in mem test which is split into two params, hit and response latency as per BaseCache.
2014-04-01configs: use SimpleMemory when using ruby in se modeNilay Vaish
A recent changeset altered the default memory class to DRAMCtrl. In se mode, ruby uses the physical memory to check if a given address is within the bounds of the physical memory. SimpleMemory is enough for this. Moreover, SimpleMemory does not check whether it is connected or not, something which DRAMCtrl does.
2014-03-20config: ruby: rename _cpu_ruby_ports to _cpu_portsNilay Vaish
2014-03-20config: fs.py: move creating of test/drive systems to functionsNilay Vaish
The code that creates test and drive systems is being moved to separate functions so as to make the code more readable. Ultimately the two functions would be combined so that the replicated code is eliminated.
2014-03-20config: remove ruby_fs.pyNilay Vaish
The patch removes the ruby_fs.py file. The functionality is being moved to fs.py. This would being ruby fs simulations in line with how ruby se simulations are started (using --ruby option). The alpha fs config functions are being combined for classing and ruby memory systems. This required renaming the piobus in ruby to iobus. So, we will have stats being renamed in the stats file for ruby fs regression.
2014-03-20ruby: no piobus in se modeNilay Vaish
Piobus was recently added to se scripts for ruby so that the interrupt controller can be connected to something (required since the interrupt controller sends address range messages). This patch removes the piobus and instead, the pio port of ruby port will now ignore the range change messages in se mode.
2014-02-24ruby: correct errors in changeset 4eec7bdde5b0Nilay Vaish
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch. Firstly, we create interrupt controllers in the se mode, but no piobus was being created. RubyPort, which earlier used to ignore range changes now forwards those to the piobus. The lack of piobus resulted in segmentation fault. This patch creates a piobus even in se mode. It is not created only when some tester is running. Secondly, I had missed out on modifying port connections for other coherence protocols.
2014-02-23ruby: route all packets through ruby portNilay Vaish
Currently, the interrupt controller in x86 is connected to the io bus directly. Therefore the packets between the io devices and the interrupt controller do not go through ruby. This patch changes ruby port so that these packets arrive at the ruby port first, which then routes them to their destination. Note that the patch does not make these packets go through the ruby network. That would happen in a subsequent patch.
2014-02-21config: ruby_random_test: updates due to recent unrelated changesNilay Vaish
2014-01-31config: correct bug in x86 drive sys instantiationNilay Vaish
2014-01-27config: allow more than 3GB of memory for x86 simulationsNilay Vaish
This patch edits the configuration files so that x86 simulations can have more than 3GB of memory. It also corrects a bug in the MemConfig.py script.
2014-01-24arm: Add support for ARMv8 (AArch64 & AArch32)ARM gem5 Developers
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2013-10-17util: Streamline .apc project convertsion scriptDam Sunwoo
This Python script generates an ARM DS-5 Streamline .apc project based on gem5 run. To successfully convert, the gem5 runs needs to be run with the context-switch-based stats dump option enabled (The guest kernel also needs to be patched to allow gem5 interrogate its task information.) See help for more information.
2013-10-17config: Fix memtest example scriptAli Saidi
2013-10-09config: correct example ruby scriptsNilay Vaish
A couple of recent changesets added/deleted/edited some variables that are needed for running the example ruby scripts. This changeset edits these scripts to bring them to a working state.
2013-10-07config: set cwd for processes in se.pyNilay Vaish
2013-09-17configs: Fix ruby_fs.py cache line sizeJoel Hestness
Recent changes added setting of system-wide cache line size and these settings occur in the top-level configs (se.py and fs.py). This setting also needs to take place in ruby_fs.py. This change sets the cache line size as appropriate.
2013-09-12config: Add voltage domain to Ruby example scriptsAndreas Hansson
This patch adds the minimum required voltage domain configuration to the Ruby example scripts.
2013-08-19config: Command line support for multi-channel memoryAndreas Hansson
This patch adds support for specifying multi-channel memory configurations on the command line, e.g. 'se/fs.py --mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it enhances the functionality of MemConfig and moves the existing makeMultiChannel class method from SimpleDRAM to the support scripts. The se/fs.py example scripts are updated to make use of the new feature.
2013-08-19mem: Change AbstractMemory defaults to match the common caseAndreas Hansson
This patch changes the default parameter value of conf_table_reported to match the common case. It also simplifies the regression and config scripts to reflect this change.
2013-08-19power: Add voltage domains to the clock domainsAkash Bagdia
This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19config: Move the memory instantiation outside FSConfigAndreas Hansson
This patch moves the instantiation of the memory controller outside FSConfig and instead relies on the mem_ranges to pass the information to the caller (e.g. fs.py or one of the regression scripts). The main motivation for this change is to expose the structural composition of the memory system and allow more tuning and configuration without adding a large number of options to the makeSystem functions. The patch updates the relevant example scripts to maintain the current functionality. As the order that ports are connected to the memory bus changes (in certain regresisons), some bus stats are shuffled around. For example, what used to be layer 0 is now layer 1. Going forward, options will be added to support the addition of multi-channel memory controllers.
2013-07-18config: Update script to set cache line size on systemAndreas Hansson
This patch changes the config scripts such that they do not set the cache line size per cache instance, but rather for the system as a whole.
2013-06-28configs: rearrange the available options in Options.pyNilay Vaish
It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-27sim: Add the notion of clock domains to all ClockedObjectsAkash Bagdia
This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27config: Add a system clock command-line optionAkash Bagdia
This patch adds a 'sys_clock' command-line option and use it to assign clocks to the system during instantiation. As part of this change, the default clock in the System class is removed and whenever a system is instantiated a system clock value must be set. A default value is provided for the command-line option. The configs and tests are updated accordingly.
2013-06-27config: Add a CPU clock command-line optionAkash Bagdia
This patch adds a 'cpu_clock' command-line option and uses the value to assign clocks to components running at the CPU speed (L1 and L2 including the L2-bus). The configuration scripts are updated accordingly. The 'clock' option is left unchanged in this patch as it is still used by a number of components. In follow-on patches the latter will be disambiguated further.
2013-06-27config: Remove redundant explicit setting of default clocksAkash Bagdia
This patch removes the explicit setting of the clock period for certain instances of CoherentBus, NonCoherentBus and IOCache where the specified clock is same as the default value of the system clock. As all the values used are the defaults, there are no performance changes. There are similar cases where the toL2Bus is set to use the parent CPU clock which is already the default behaviour. The main motivation for these simplifications is to ease the introduction of clock domains.
2013-06-13config: Do not instantiate membus when using rubyNilay Vaish
This patch moves the instantiation of system.membus in se.py to the area of code where classic memory system has been dealt with. Ruby does not require this bus and hence it should not be instantiated.
2013-04-23config: Fix mem-type option not used in ruby_fs scriptMarco Elver
This fixes missing mem-type arguments to makeLinuxAlphaRubySystem and makeLinuxX86System after a recent changeset allowing mem-type to be configured via options missed fixing these calls. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-04-22config: Add a mem-type config option to se/fs scriptsAndreas Hansson
This patch enables selection of the memory controller class through a mem-type command-line option. Behind the scenes, this option is treated much like the cpu-type, and a similar framework is used to resolve the valid options, and translate the short-hand description to a valid class. The regression scripts are updated with a hardcoded memory class for the moment. The best solution going forward is probably to get the memory out of the makeSystem functions, but Ruby complicates things as it does not connect the memory controller to the membus. --HG-- rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22config: Add a KVM VM to systems with KVM CPUsAndreas Sandberg
KVM-based CPUs need a KVM VM object in the system to manage system-global KVM stuff (VM creation, interrupt delivery, memory managment, etc.). This changeset adds a VM to the system if KVM has been enabled at compile time (the BaseKvmCPU object exists) and a KVM-based CPU has been selected at runtime.
2013-04-22cpu: generate SimPoint basic block vector profilesDam Sunwoo
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout folder) based on start and end addresses of basic blocks. Some comments to the original patch are addressed and hooks are added to create and resume from checkpoints based on instruction counts dictated by external SimPoint analysis tools. SimPoint creation/resuming options will be implemented as a separate patch.
2013-03-06ruby: remove the functional copy of memory in se modeNilay Vaish
This patch removes the functional copy of the memory that was maintained in the se mode. Now ruby itself will provide the data.
2013-02-15options: add command line option for dtb fileAnthony Gutierrez
2013-01-07config: Do not use hardcoded physmem in fs scriptAndreas Hansson
This patch generalises the address range resolution for the I/O cache and I/O bridge such that they do not assume a single memory. The patch involves adding a parameter to the system which is then defined based on the memories that are to be visible from the I/O subsystem, whether behind a cache or a bridge. The change is needed to allow interleaved memory controllers in the system.
2013-01-07arch: Make the ISA class inherit from SimObjectAndreas Sandberg
The ISA class on stores the contents of ID registers on many architectures. In order to make reset values of such registers configurable, we make the class inherit from SimObject, which allows us to use the normal generated parameter headers. This patch introduces a Python helper method, BaseCPU.createThreads(), which creates a set of ISAs for each of the threads in an SMT system. Although it is currently only needed when creating multi-threaded CPUs, it should always be called before instantiating the system as this is an obvious place to configure ID registers identifying a thread/CPU.
2012-12-11ruby: modify the directed tester to read/write streamsNilay Vaish
The directed tester supports only generating only read or only write accesses. The patch modifies the tester to support streams that have both read and write accesses.
2012-10-26config: Add a check for fastmem only used with Atomic CPUAndreas Hansson
This patch adds an additional check to ensure that the fastmem option is only used if the system is using the Atomic CPU.
2012-10-26config: Remove unused mem_size in fs.pyAndreas Hansson
This patch removes a segment of dead code that is never used.
2012-10-15ruby: improved support for functional accessesNilay Vaish
This patch adds support to different entities in the ruby memory system for more reliable functional read/write accesses. Only the simple network has been augmented as of now. Later on Garnet will also support functional accesses. The patch adds functional access code to all the different types of messages that protocols can send around. These messages are functionally accessed by going through the buffers maintained by the network entities. The patch also rectifies some of the bugs found in coherence protocols while testing the patch. With this patch applied, functional writes always succeed. But functional reads can still fail.
2012-10-15Mem: Use cycles to express cache-related latenciesAndreas Hansson
This patch changes the cache-related latencies from an absolute time expressed in Ticks, to a number of cycles that can be scaled with the clock period of the caches. Ultimately this patch serves to enable future work that involves dynamic frequency scaling. As an immediate benefit it also makes it more convenient to specify cache performance without implicitly assuming a specific CPU core operating frequency. The stat blocked_cycles that actually counter in ticks is now updated to count in cycles. As the timing is now rounded to the clock edges of the cache, there are some regressions that change. Plenty of them have very minor changes, whereas some regressions with a short run-time are perturbed quite significantly. A follow-on patch updates all the statistics for the regressions.
2012-09-28Configs: SE script fix for Alpha and Ruby simulationsMalek Musleh
PIO interrupt port is only present for x86. Do not attempt to connect for other ISAs.
2012-09-27Configs: Fix memtest cache latency to match new parametersAndreas Hansson
This patch changes the memtest config to use the new response latency of the cache model.
2012-09-27Configs: Fix memtest.py by moving the system portAndreas Hansson
The memtest.py script used to connect the system port directly to the SimpleMemory, but the latter is now single ported. Since the system port is not used for anything in this particular example, a quick fix is to attach it to the functional bus instead.
2012-09-12se.py Ruby: Connect TLB walker portsJoel Hestness
In order to ensure correct functionality of switch CPUs, the TLB walker ports must be connected to the Ruby system in x86 simulation. This fixes x86 assertion failures that the TLB walker ports are not connected during the CPU switch process.
2012-09-11se.py: removes error in passing options to a binaryNilay Vaish
2012-09-09se.py: support specifying multiple programs via command lineNilay Vaish
This patch allows for specifying multiple programs via command line. It also adds an option for specifying whether to use of SMT. But SMT does not work for the o3 cpu as of now.
2012-08-22Bridge: Remove NACKs in the bridge and unify with packet queueAndreas Hansson
This patch removes the NACKing in the bridge, as the split request/response busses now ensure that protocol deadlocks do not occur, i.e. the message-dependency chain is broken by always allowing responses to make progress without being stalled by requests. The NACKs had limited support in the system with most components ignoring their use (with a suitable call to panic), and as the NACKs are no longer needed to avoid protocol deadlocks, the cleanest way is to simply remove them. The bridge is the starting point as this is the only place where the NACKs are created. A follow-up patch will remove the code that deals with NACKs in the endpoints, e.g. the X86 table walker and DMA port. Ultimately the type of packet can be complete removed (until someone sees a need for modelling more complex protocols, which can now be done in parts of the system since the port and interface is split). As a consequence of the NACK removal, the bridge now has to send a retry to a master if the request or response queue was full on the first attempt. This change also makes the bridge ports very similar to QueuedPorts, and a later patch will change the bridge to use these. A first step in this direction is taken by aligning the name of the member functions, as done by this patch. A bit of tidying up has also been done as part of the simplifications. Surprisingly, this patch has no impact on any of the regressions. Hence, there was never any NACKs issued. In a follow-up patch I would suggest changing the size of the bridge buffers set in FSConfig.py to also test the situation where the bridge fills up.