summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2012-01-26configs: actually add ARMv7a-like cpu/cache fileRonald Dreslinski
2012-01-26configs: A more realistic configuration of an ARM-like processorRonald Dreslinski
2012-01-25MEM: Fix fs.py by specifying the range size rather than endAndreas Hansson
This patch fixes the currently broken fs.py by specifying the size of the bridge range rather than the end address. This effectively subtracts one when determining the address range for the IO bridge (from IO bus to membus), and thus avoids the overlapping ranges.
2012-01-23Config: Enable using O3 CPU and Ruby in SE modeNilay Vaish
2012-01-23O3, Ruby: Forward invalidations from Ruby to O3 CPUNilay Vaish
This patch implements the functionality for forwarding invalidations and replacements from the L1 cache of the Ruby memory system to the O3 CPU. The implementation adds a list of ports to RubyPort. Whenever a replacement or an invalidation is performed, the L1 cache forwards this to all the ports, which is the LSQ in case of the O3 CPU.
2012-01-17MEM: Removing the default port peer from Python portsAndreas Hansson
In preparation for the introduction of Master and Slave ports, this patch removes the default port parameter in the Python port and thus forces the argument list of the Port to contain only the description. The drawback at this point is that the config port and dma port of PCI and DMA devices have to be connected explicitly. This is key for future diversification as the pio and config port are slaves, but the dma port is a master.
2012-01-17MEM: Make the bus bridge unidirectional and fixed address rangeAndreas Hansson
This patch makes the bus bridge uni-directional and specialises the bus ports to be a master port and a slave port. This greatly simplifies the assumptions on both sides as either port only has to deal with requests or responses. The following patches introduce the notion of master and slave ports, and would not be possible without this split of responsibilities. In making the bridge unidirectional, the address range mechanism of the bridge is also changed. For the cases where communication is taking place both ways, an additional bridge is needed. This causes issues with the existing mechanism, as the busses cannot determine when to stop iterating the address updates from the two bridges. To avoid this issue, and also greatly simplify the specification, the bridge now has a fixed set of address ranges, specified at creation time.
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-11Ruby: Use map option for selecting b/w sparse and memory vectorNilay Vaish
2012-01-11Config: Add support for restoring using a timing CPUNilay Vaish
Currently there is an assumption that restoration from a checkpoint will happen by first restoring to an atomic CPU and then switching to a timing CPU. This patch adds support for directly restoring to a timing CPU. It adds a new option '--restore-with-cpu' which is used to specify the type of CPU to which the checkpoint should be restored to. It defaults to 'atomic' which was the case before.
2012-01-10Ruby: remove the files related to the tracerNilay Vaish
The Ruby Tracer is out of date with the changes that are being carried out to support checkpointing. Hence, it needs to be removed.
2012-01-10Config: Remove short option string for cpu typeNilay Vaish
2012-01-09ARM: Add support for running multiple systemsAli Saidi
2012-01-09ARM: Add support for initparam m5 opAli Saidi
2012-01-09cpu2000: Add missing art benchmark to allAli Saidi
2012-01-07Ruby Cache: Add param for marking caches as instruction onlyNilay Vaish
2012-01-05Config: Add an option of type 'choice' for cpu typeNilay Vaish
This patch adds a new option for cpu type. This option is of type 'choice' which is similar to a C++ enum, except that it takes string values as possible choices. Following options are being removed -- detailed, timing, inorder. --HG-- extra : rebase_source : 58885e2e8a88b6af8e6ff884a5922059dbb1a6cb
2011-12-15ARM: Update config files for Android/BBench images available on website.Anthony Gutierrez
--HG-- extra : rebase_source : ca98021c3f96422374fbd4500da312a5a9dd00df
2011-12-01config: command line option to specify ruby output filegloh
--HG-- extra : rebase_source : df2237b2ce01b1a3e1d6f112a62deadde4d92420
2011-12-01VNC: Add support for capturing frame buffer to file each time it is changed.Chris Emmons
When a change in the frame buffer from the VNC server is detected, the new frame is stored out to the m5out/frames_*/ directory. Specifiy the flag "--frame-capture" when running configs/example/fs.py to enable this behavior. --HG-- extra : rebase_source : d4e08e83f4fa6ff79f3dc9c433fc1f0487e057fc
2011-12-01O3: Remove hardcoded tgts_per_mshr in O3CPU.py.Chander Sudanthi
There are two lines in O3CPU.py that set the dcache and icache tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr. This patch removes these hardcoded lines from O3CPU.py and sets the default L1 cache mshr targets to 20. --HG-- extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
2011-11-04GARNET: adding a fault model for resilient on-chip network research.Tushar Krishna
This patch adds a fault model, which provides the probability of a number of architectural faults in the interconnection network (e.g., data corruption, misrouting). These probabilities can be used to realistically inject faults in GARNET and faithfully evaluate the effectiveness of novel resilient NoC architectures.
2011-10-29Ruby FS: Add the options for kernel and simulation scriptNilay Vaish
These options were missing from the script ruby_fs.py. This patch adds these options to the script.
2011-10-19ARM: Fix small bug in config script that prevents android from bootingAli Saidi
2011-08-19ARM: Add some MP regressions and clean up the disk images and kernels a bitAli Saidi
2011-08-19ARM: Add VExpress_E support with PCIe to gem5Ali Saidi
2011-08-19ARM: Add support for Versatile Express boardsAli Saidi
2011-08-02Scons: Drop RUBY as compile time option.Nilay Vaish
This patch drops RUBY as a compile time option. Instead the PROTOCOL option is used to figure out whether or not to build Ruby. If the specified protocol is 'None', then Ruby is not compiled.
2011-07-26Ruby: Fix instantiations of DMA controller and sequencerNilay Vaish
The patch on Ruby functional accesses made changes to the process of instantiating controllers and sequencers. The DMA controller and sequencer was not updated, hence this patch.
2011-07-25Ruby: Fix dma controller configs/ruby/MI_example.pyNilay Vaish
The dma controller in configs/ruby/MI_example.py was not being set correctly. This patch fixes it.
2011-07-11se.py: Fixes the way ruby's options are addedNilay Vaish
2011-07-03Network_test: Conform it with functional access changes in RubyNilay Vaish
Addition of functional access support to Ruby necessitated some changes to the way coherence protocols are written. I had forgotten to update the Network_test protocol. This patch makes those updates.
2011-06-30config: removed unnecessary slashesBrad Beckmann
This patch removes unnecessary slashes from a couple of python scripts.
2011-06-30Ruby: Add support for functional accessesBrad Beckmann ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
This patch rpovides functional access support in Ruby. Currently only the M5Port of RubyPort supports functional accesses. The support for functional through the PioPort will be added as a separate patch.
2011-06-17ARM: Add m5ops and related support for workbegin() and workend() to ARM ISA.Gedare Bloom
2011-05-23config: revamp x86 config to avoid appending to SimObjectVectorsSteve Reinhardt
A significant contributor to the need for adoptOrphanParams() is the practice of appending to SimObjectVectors which have already been assigned as children. This practice sidesteps the assignment operation for those appended SimObjects, which is where parent/child relationships are typically established. This patch reworks the config scripts that use append() on SimObjectVectors, which all happen to be in the x86 system configuration. At some point in the future, I hope to make SimObjectVectors immutable (by deriving from tuple rather than list), at which time this patch will be necessary for correct operation. For now, it just avoids some of the warning messages that get printed in adoptOrphanParams().
2011-05-23config: tweak ruby configs to clean up hierarchySteve Reinhardt
Re-enabling implicit parenting (see previous patch) causes current Ruby config scripts to create some strange hierarchies and generate several warnings. This patch makes three general changes to address these issues. 1. The order of object creation in the ruby config files makes the L1 caches children of the sequencer rather than the controller; these config ciles are rewritten to assign the L1 caches to the controller first. 2. The assignment of the sequencer list to system.ruby.cpu_ruby_ports causes the sequencers to be children of system.ruby, generating warnings because they are already parented to their respective controllers. Changing this attribute to _cpu_ruby_ports fixes this because the leading underscore means this is now treated as a plain Python attribute rather than a child assignment. As a result, the configuration hierarchy changes such that, e.g., system.ruby.cpu_ruby_ports0 becomes system.l1_cntrl0.sequencer. 3. In the topology classes, the routers become children of some random internal link node rather than direct children of the topology. The topology classes are rewritten to assign the routers to the topology object first.
2011-05-23configs: missed spot progress-interval changeKorey Sewell
2011-05-21configs: remove -p from ruby_network_test.pyTushar Krishna
A recent patch broke the ruby network tester by adding -p inside Options.py which conflicts with the -p inside ruby_network_test.py. Have removed -p from ruby_network_test.py
2011-05-20configs: cleanup redundant/unused optionsKorey Sewell
maxinsts & max_inst redundant prog_intvl and profile seem redundant, but profile looks to be unused add -p option for progress intervals
2011-05-07NetworkTest: added sim_cycles parameter to the network tester.Tushar Krishna
The network tester terminates after injecting for sim_cycles (default=1000), instead of having to explicitly pass --maxticks from the command line as before. If fixed_pkts is enabled, the tester only injects maxpackets number of packets, else it keeps injecting till sim_cycles. The tester also works with zero command line arguments now.
2011-05-04ARM: Configure bootloader parametersAli Saidi
2011-04-28network: basic link bw for garnet and simple networksBrad Beckmann
This patch ensures that both Garnet and the simple networks use the bw value specified in the topology. To do so, the patch generalizes the specification of bw for basic links. This value is then translated to the specific value used by the simple and Garnet networks. Since Garent does not support non-uniformed link bandwidth, the patch also adds a check to ensure all bws are equal. --HG-- rename : src/mem/ruby/network/BasicLink.cc => src/mem/ruby/network/simple/SimpleLink.cc rename : src/mem/ruby/network/BasicLink.hh => src/mem/ruby/network/simple/SimpleLink.hh rename : src/mem/ruby/network/BasicLink.py => src/mem/ruby/network/simple/SimpleLink.py
2011-04-28network: convert links & switches to first class C++ SimObjectsBrad Beckmann
This patch converts links and switches from second class simobjects that were virtually ignored by the networks (both simple and Garnet) to first class simobjects that directly correspond to c++ ojbects manipulated by the topology and network classes. This is especially true for Garnet, where the links and switches directly correspond to specific C++ objects. By making this change, many aspects of the Topology class were simplified. --HG-- rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/BasicLink.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/BasicLink.hh rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.hh rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.py rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetRouter_d.py rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.hh rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.py rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetRouter.py
2011-04-20python: fix another bug from changes to main.pyNathan Binkert
2011-04-04ARM: Include IDE/CF controller by default in PBX model.Ali Saidi
Frame buffer and boot linux: ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit Linux from a CF card: ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit Run Android ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android Run MP ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04Sim: Fix Simulation.py to allow more than 1 core for standard switching.Anthony Gutierrez
This patch moves the assignment of testsys.switch_cpus, testsys.switch_cpus_1, switch_cpu_list, and switch_cpu_list1 outside of the for loop so they are assigned only once, after switch_cpus and switch_cpus_1 are constructed.
2011-03-28This patch supports cache flushing in MOESI_hammerSomayeh Sardashti
2011-03-28Config: Import math in MI_example.pyNilay Vaish
2011-03-25ruby: fixed cache index settingBrad Beckmann