summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2012-09-19AddrRange: Simplify AddrRange params Python hierarchyAndreas Hansson
This patch simplifies the Range object hierarchy in preparation for an address range class that also allows striping (e.g. selecting a few bits as matching in addition to the range). To extend the AddrRange class to an AddrRegion, the first step is to simplify the hierarchy such that we can make it as lean as possible before adding the new functionality. The only class using Range and MetaRange is AddrRange, and the three classes are now collapsed into one.
2012-09-12se.py Ruby: Connect TLB walker portsJoel Hestness
In order to ensure correct functionality of switch CPUs, the TLB walker ports must be connected to the Ruby system in x86 simulation. This fixes x86 assertion failures that the TLB walker ports are not connected during the CPU switch process.
2012-09-12Standard Switch: Drain the system before switching CPUsJoel Hestness
When switching from an atomic CPU to any of the timing CPUs, a drain is unnecessary since no events are scheduled in atomic mode. However, when trying to switch CPUs starting with a timing CPU, there may be events scheduled. This change ensures that all events are drained from the system by calling m5.drain before switching CPUs.
2012-09-11se.py: removes error in passing options to a binaryNilay Vaish
2012-09-11Checkpoint: Pass maxtick to avoid undefined variableAndreas Hansson
This patch fixes a bug in scriptCheckpoints, where maxtick was used undefined. The bug caused checkpointing by means of --take-checkpoints to fail.
2012-09-09se.py: support specifying multiple programs via command lineNilay Vaish
This patch allows for specifying multiple programs via command line. It also adds an option for specifying whether to use of SMT. But SMT does not work for the o3 cpu as of now.
2012-08-22Bridge: Remove NACKs in the bridge and unify with packet queueAndreas Hansson
This patch removes the NACKing in the bridge, as the split request/response busses now ensure that protocol deadlocks do not occur, i.e. the message-dependency chain is broken by always allowing responses to make progress without being stalled by requests. The NACKs had limited support in the system with most components ignoring their use (with a suitable call to panic), and as the NACKs are no longer needed to avoid protocol deadlocks, the cleanest way is to simply remove them. The bridge is the starting point as this is the only place where the NACKs are created. A follow-up patch will remove the code that deals with NACKs in the endpoints, e.g. the X86 table walker and DMA port. Ultimately the type of packet can be complete removed (until someone sees a need for modelling more complex protocols, which can now be done in parts of the system since the port and interface is split). As a consequence of the NACK removal, the bridge now has to send a retry to a master if the request or response queue was full on the first attempt. This change also makes the bridge ports very similar to QueuedPorts, and a later patch will change the bridge to use these. A first step in this direction is taken by aligning the name of the member functions, as done by this patch. A bit of tidying up has also been done as part of the simplifications. Surprisingly, this patch has no impact on any of the regressions. Hence, there was never any NACKs issued. In a follow-up patch I would suggest changing the size of the bridge buffers set in FSConfig.py to also test the situation where the bridge fills up.
2012-08-21Checkpoint: Fix broken checkpointing functionalityAndreas Hansson
This patch fixes the checkpointing by ensuring that the directory is passer to the scriptCheckpoints function, and that the num_checkpoints is not used before it is initialised.
2012-08-16Ruby: Add RubySystem parameter to MemoryControlJason Power
This guarantees that RubySystem object is created before the MemoryController object is created.
2012-08-15configs: add option for repeatedly switching back-and-forth between cpu types.Anthony Gutierrez
This patch adds a --repeat-switch option that will enable repeat core switching at a user defined period (set with --switch-freq option). currently, a switch can only occur between like CPU types. inorder CPU switching is not supported. *note* this patch simply allows a config that will perform repeat switching, it does not fix drain/switchout functionality. if you run with repeat switching you will hit assertion failures and/or your workload with hang or die.
2012-08-10Ruby: Clean up topology changesJason Power
This patch moves instantiateTopology into Ruby.py and removes the mem/ruby/network/topologies directory. It also adds some extra inheritance to the topologies to clean up some issues in the existing topologies.
2012-08-06Simulation.py: move code related to checkpointing to functionsNilay Vaish
This patch moves the code related to checkpointing from the run() function to several different functions. The aim is to make the code more manageable. No functionality changes are expected, but since the code is kind of unruly, it is possible that some change might have creeped in.
2012-08-06Config: change how cpu class is setNilay Vaish
This changes the way in which the cpu class while restoring from a checkpoint is set. Earlier it was assumed if cpu type with which to restore is not same as the cpu type with the which to run the simulation, then the checkpoint should be restored with the atomic cpu. This assumption is being dropped. The checkpoint can now be restored with any cpu type, the default being atomic cpu.
2012-07-23Config: Use clock option in se/fs script and pass to switch_cpusAndreas Hansson
This patch changes the se and fs script to use the clock option and not simply set the CPUs clock to 2 GHz. It also makes a minor change to the assignment of the switch_cpus clock to allow different clocks.
2012-07-12Mem: Make SimpleMemory single portedAndreas Hansson
This patch changes the simple memory to have a single slave port rather than a vector port. The simple memory makes no attempts at modelling the contention between multiple ports, and any such multiplexing and demultiplexing could be done in a bus (or crossbar) outside the memory controller. This scenario also matches with the ongoing work on a SimpleDRAM model, which will be a single-ported single-channel controller that can be used in conjunction with a bus (or crossbar) to create a multi-port multi-channel controller. There are only very few regressions that make use of the vector port, and these are all for functional accesses only. To facilitate these cases, memtest and memtest-ruby have been updated to also have a "functional" bus to perform the (de)multiplexing of the functional memory accesses.
2012-07-10ruby: remove the cpu assumptions for the random testerBrad Beckmann
2012-07-10ruby: changes how Topologies are createdBrad Beckmann
Instead of just passing a list of controllers to the makeTopology function in src/mem/ruby/network/topologies/<Topo>.py we pass in a function pointer which knows how to make the topology, possibly with some extra state set in the configs/ruby/<protocol>.py file. Thus, we can move all of the files from network/topologies to configs/topologies. A new class BaseTopology is added which all topologies in configs/topologies must inheirit from and follow its API. --HG-- rename : src/mem/ruby/network/topologies/Crossbar.py => configs/topologies/Crossbar.py rename : src/mem/ruby/network/topologies/Mesh.py => configs/topologies/Mesh.py rename : src/mem/ruby/network/topologies/MeshDirCorners.py => configs/topologies/MeshDirCorners.py rename : src/mem/ruby/network/topologies/Pt2Pt.py => configs/topologies/Pt2Pt.py rename : src/mem/ruby/network/topologies/Torus.py => configs/topologies/Torus.py
2012-06-11configs: add run scripts for ics/gb versions of android and bbenchAnthony Gutierrez
1) Modifies Benchmarks.py to add support for Android ICS and BBench on Android ICS. 2) An rcS script is added for BBench on ICS. 3) Separates benchmark entries and rcS scripts for GB/ICS 4) Removes the debugging output from the existing BBench run script. These print statements were used for debugging and they seemed to confuse users into believing they should see some terminal output.
2012-06-07Config: call to setWorkCountOptions() for all ISAsNilay Vaish
2012-06-07Config: Remove setMipsOptionsNilay Vaish
As status matrix, MIPS fs does not work. Hence, these options are not required. Secondly, the function is setting param values for a CPU class. This seems strange, should probably be done in a different way.
2012-06-07Config: changes to a couple of error msgsNilay Vaish
2012-05-31Bus: Split the bus into a non-coherent and coherent busAndreas Hansson
This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-16Config: Fix a typo in the se.py script for setting fastmemAndreas Hansson
This patch changes a hardcoded index 0 to the appropriate CPU index so that fastmem is set correctly for all the CPUs in the system.
2012-05-03Config: Fix help msg for option --mem-sizeJayneel Gandhi
2012-04-17SE Config: Changed se.py to support multithreaded modeJayneel Gandhi
Multithreaded programs did not run by just specifying the binary once on the command line of SE mode.The default mode is multi-programmed mode. Added check in SE mode to run multi-threaded programs in case only one program is specified with multiple CPUS. Default mode is still multi-programmed mode.
2012-04-16Config: Add command line options for disk image and memory sizeJayneel Gandhi
Added the options to Options.py for FS mode with backward compatibility. It is good to provide an option to specify the disk image and the memory size from command line since a lot of disk images are created to support different benchmark suites as well as per user needs. Change in program also leads to change in memory requirements. These options provide the interface to provide both disk image and memory size from the command line and gives more flexibility.
2012-04-06ruby: set SimpleTiming as the default cpuBrad Beckmann
2012-04-06rubytest: seperated read and write ports.Brad Beckmann
This patch allows the ruby tester to support protocols where the i-cache and d-cache are managed by seperate controllers.
2012-04-06MEM: Enable multiple distributed generalized memoriesAndreas Hansson
This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-05Config: corrects the way Ruby attaches to the DMA portsNilay Vaish
With recent changes to the memory system, a port cannot be assigned a peer port twice. While making use of the Ruby memory system in FS mode, DMA ports were assigned peer twice, once for the classic memory system and once for the Ruby memory system. This patch removes this double assignment of peer ports.
2012-04-05Ruby: Fix the example configurations option parsingAndreas Hansson
This patch fixes the, currently broken, Ruby example scripts to reflect the changes in the parsing of command-line options.
2012-04-03Atomic: Remove the physmem_port and access memory directlyAndreas Hansson
This patch removes the physmem_port from the Atomic CPU and instead uses the system pointer to access the physmem when using the fastmem option. The system already keeps track of the physmem and the valid memory address ranges, and with this patch we merely make use of that existing functionality. As a result of this change, the overloaded getMasterPort in the Atomic CPU can be removed, thus unifying the CPUs.
2012-03-30Ruby: Remove the physMemPort and instead access memory directlyAndreas Hansson
This patch removes the physMemPort from the RubySequencer and instead uses the system pointer to access the physmem. The system already keeps track of the physmem and the valid memory address ranges, and with this patch we merely make use of that existing functionality. The memory is modified so that it is possible to call the access functions (atomic and functional) without going through the port, and the memory is allowed to be unconnected, i.e. have no ports (since Ruby does not attach it like the conventional memory system).
2012-03-28Config: Change the way options are addedNilay Vaish
I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-27Config: Move setWorkCountOptions() to Simulation.pyNilay Vaish
The function is presently defined in FSConfig.py, which does not seem to be the correct place for it.
2012-03-16ruby_fs.py: Add call to createInterruptController()Nilay Vaish
2012-03-16FSConfig.py: fix a typo makeLinuxAlphaRubySystemNilay Vaish
2012-03-11se.py: Changes to ruby portion due to SE/FS mergeNilay Vaish
With the SE/FS merge, interrupt controller is created irrespective of the mode. This patch creates the interrupt controller when Ruby is used and connects its ports.
2012-03-09ARM: Fix memory starting at non-zero address and exceeding max mem for a system.Ali Saidi
2012-03-09CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectableGeoffrey Blake
Enables the CheckerCPU to be selected at runtime with the --checker option from the configs/example/fs.py and configs/example/se.py configuration files. Also merges with the SE/FS changes.
2012-03-09cache: Allow main memory to be at disjoint address ranges.Ali Saidi
2012-03-01ARM: Add support for Versatile Express extended memory mapAli Saidi
Also clean up how we create boot loader memory a bit.
2012-03-01x86: Fix switching of CPUsNilay Vaish
This patch prevents creation of interrupt controller for cpus that will be switched in later
2012-03-01Config: make option ruby available alwaysNilay Vaish
2012-02-26Make the IO bridge accept address headed to all the local APICs.Gabe Black
2012-02-14MEM: Fix residual bus ports and make them master/slaveAndreas Hansson
This patch cleans up a number of remaining uses of bus.port which is now split into bus.master and bus.slave. The only non-trivial change is the memtest where the level building now has to be aware of the role of the ports used in the previous level.
2012-02-14Script: Fix the scripts that use the num_cpus cache parameterAndreas Hansson
This patch merely removes the use of the num_cpus cache parameter which no longer exists after the introduction of the masterIds. The affected scripts fail when trying to set the parameter. Note that this patch does not update the regression stats.
2012-02-14MEM: Fix master/slave ports in Ruby and non-regression scriptsAndreas Hansson
This patch brings the Ruby and other scripts up to date with the introduction of the master/slave ports.
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-12configs: fix minor config bugs posted on the mailing listAli Saidi