summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2014-11-23config, kvm: Enabling KvmCPU in SE modeAlexandru Dutu
This patch modifies se.py such that it can now use kvm cpu model.
2014-11-23Backed out prior changeset f9fb64a72259Steve Reinhardt
Back out use of importlib to avoid implicitly creating dependency on Python 2.7.
2014-11-23config: ruby: Get rid of an "eval" and an "exec" operating on generated code.Gabe Black
We can get the same result using importlib.
2014-11-18configs: small fix to ruby portion of fs.py and se.pyNilay Vaish
In fs.py the io port controller was being attached to the iobus multiple times. This should be done only once. In se.py, the the option use_map was being set which no longer exists.
2014-11-06x86 isa: This patch attempts an implementation at mwait.Marc Orr
Mwait works as follows: 1. A cpu monitors an address of interest (monitor instruction) 2. A cpu calls mwait - this loads the cache line into that cpu's cache. 3. The cpu goes to sleep. 4. When another processor requests write permission for the line, it is evicted from the sleeping cpu's cache. This eviction is forwarded to the sleeping cpu, which then wakes up. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-11-06ruby: provide a backing storeNilay Vaish
Ruby's functional accesses are not guaranteed to succeed as of now. While this is not a problem for the protocols that are currently in the mainline repo, it seems that coherence protocols for gpus rely on a backing store to supply the correct data. The aim of this patch is to make this backing store configurable i.e. it comes into play only when a particular option: --access-backing-store is invoked. The backing store has been there since M5 and GEMS were integrated. The only difference is that earlier the system used to maintain the backing store and ruby's copy was write-only. Sometime last year, we moved to data being supplied supplied by ruby in SE mode simulations. And now we have patches on the reviewboard, which remove ruby's copy of memory altogether and rely completely on the system's memory to supply data. This patch adds back a SimpleMemory member to RubySystem. This member is used only if the option: access-backing-store is set to true. By default, the memory would not be accessed.
2014-11-06ruby: interface with classic memory controllerNilay Vaish
This patch is the final in the series. The whole series and this patch in particular were written with the aim of interfacing ruby's directory controller with the memory controller in the classic memory system. This is being done since ruby's memory controller has not being kept up to date with the changes going on in DRAMs. Classic's memory controller is more up to date and supports multiple different types of DRAM. This also brings classic and ruby ever more close. The patch also changes ruby's memory controller to expose the same interface.
2014-11-06ruby: single physical memory in fs modeNilay Vaish
Both ruby and the system used to maintain memory copies. With the changes carried for programmed io accesses, only one single memory is required for fs simulations. This patch sets the copy of memory that used to reside with the system to null, so that no space is allocated, but address checks can still be carried out. All the memory accesses now source and sink values to the memory maintained by ruby.
2014-10-29arm, tests: Update config files to more recent kernels and create 64-bit ↵Ali Saidi
regressions. This changes the default ARM system to a Versatile Express-like system that supports 2GB of memory and PCI devices and updates the default kernels/file-systems for AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some platforms that are no longer supported have been pruned from the configuration files. In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-29arm: fix bare-metal memory setup.Ali Saidi
The bare-metal configuration option still configured memory with the old scheme that no-longer works. This change unifies the code so there aren't any differences.
2014-10-16config: Add the ability to read a config file using C++ and PythonAndreas Hansson
This patch adds the ability to load in config.ini files generated from gem5 into another instance of gem5 built without Python configuration support. The intended use case is for configuring gem5 when it is a library embedded in another simulation system. A parallel config file reader is also provided purely in Python to demonstrate the approach taken and to provided similar functionality for as-yet-unknown use models. The Python configuration file reader can read both .ini and .json files. C++ configuration file reading: A command line option has been added for scons to enable C++ configuration file reading: --with-cxx-config There is an example in util/cxx_config that shows C++ configuration in action. util/cxx_config/README explains how to build the example. Configuration is achieved by the object CxxConfigManager. It handles reading object descriptions from a CxxConfigFileBase object which wraps a config file reader. The wrapper class CxxIniFile is provided which wraps an IniFile for reading .ini files. Reading .json files from C++ would be possible with a similar wrapper and a JSON parser. After reading object descriptions, CxxConfigManager creates SimObjectParam-derived objects from the classes in the (generated with this patch) directory build/ARCH/cxx_config CxxConfigManager can then build SimObjects from those SimObjectParams (in an order dictated by the SimObject-value parameters on other objects) and bind ports of the produced SimObjects. A minimal set of instantiate-replacing member functions are provided by CxxConfigManager and few of the member functions of SimObject (such as drain) are extended onto CxxConfigManager. Python configuration file reading (configs/example/read_config.py): A Python version of the reader is also supplied with a similar interface to CxxConfigFileBase (In Python: ConfigFile) to config file readers. The Python config file reading will handle both .ini and .json files. The object construction strategy is slightly different in Python from the C++ reader as you need to avoid objects prematurely becoming the children of other objects when setting parameters. Port binding also needs to be strictly in the same port-index order as the original instantiation.
2014-10-11config: separate function for instantiating a memory controllerNilay Vaish
This patch moves code for instantiating a single memory controller from the function config_mem() to a separate function. This is being done so that memory controllers can be instantiated without assuming that they will be attached to the system in a particular fashion.
2014-10-11ruby: moesi hammer: correct typo in master-slave assignmentNilay Vaish
2014-07-17config, x86: Ensure that PCI devs get bridged to the memory busJiuyue Ma
This patch force IO device to be mapped to 0xC0000000-0xFFFF0000 by reserve anything between the end of memory and 3GB if memory is less than 3GB. It also statically bridge these address range to the IO bus, which guaranty access to pci address space will pass though bridge to iobus. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-07-17config, x86: swap bus_id of ISA/PCI in X86 IntelMPTableJiuyue Ma
This patch assign bus_id=0 to PCI bus and bus_id=1 to ISA bus for X86 platform. Because PCI device get config space address using Pc::calcPciConfigAddr() which requires "assert(bus==0)". This fixes PCI interrupt routing and discovery on Linux. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-20mem: Rename Bus to XBar to better reflect its behaviourAndreas Hansson
This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20cpu: Update DRAM traffic genWendy Elsasser
Add new DRAM_ROTATE mode to traffic generator. This mode will generate DRAM traffic that rotates across banks per rank, command types, and ranks per channel The looping order is illustrated below: for (ranks per channel) for (command types) for (banks per rank) // Generate DRAM Command Series This patch also adds the read percentage as an input argument to the DRAM sweep script. If the simulated read percentage is 0 or 100, the middle for loop does not generate additional commands. This loop is used only when the read percentage is set to 50, in which case the middle loop will toggle between read and write commands. Modified sweep.py script, which generates DRAM traffic. Added input arguments and support for new DRAM_ROTATE mode. The script now has input arguments for: 1) Read percentage 2) Number of ranks 3) Address mapping 4) Traffic generator mode (DRAM or DRAM_ROTATE) The default values are: 100% reads, 1 rank, RoRaBaCoCh address mapping, and DRAM traffic gen mode For the DRAM traffic mode, added multi-rank support.
2014-09-20cpu: use probes infrastructure to do simpoint profilingDam Sunwoo
Instead of having code embedded in cpu model to do simpoint profiling use the probes infrastructure to do it.
2014-09-03arm: Support >2GB of memory for AArch64 systemsAli Saidi
2014-09-03arm: Assume we have a kernel that supports pci devicesAli Saidi
Change the default kernel for AArch64 and since it supports PCI devices remove the hack that made it use CF. Unfortunately, there isn't really a half-way here and we need to switch. Current users will get an error message that the kernel isn't found and hopefully go download a new kernel that supports PCI.
2014-09-03config: Refactor RealviewEMM to fit into new config systemGeoffrey Blake
This eliminates some default devices and adds in helper functions to connect the devices defined here to associate with the proper clock domains.
2014-09-03cpu: Change writeback modeling for outstanding instructionsMitch Hayenga
As highlighed on the mailing list gem5's writeback modeling can impact performance. This patch removes the limitation on maximum outstanding issued instructions, however the number that can writeback in a single cycle is still respected in instToCommit().
2014-09-03mem: Add utility script to plot DRAM efficiency sweepAndreas Hansson
This patch adds basic functionality to quickly visualise the output from the DRAM efficiency script. There are some unfortunate hacks needed to communicate the needed information from one script to the other, and we fall back on (ab)using the simout to do this. As part of this patch we also trim the efficiency sweep to stop at 512 bytes as this should be sufficient for all forseeable DRAMs.
2014-09-01ruby: message buffers: significant changesNilay Vaish
This patch is the final patch in a series of patches. The aim of the series is to make ruby more configurable than it was. More specifically, the connections between controllers are not at all possible (unless one is ready to make significant changes to the coherence protocol). Moreover the buffers themselves are magically connected to the network inside the slicc code. These connections are not part of the configuration file. This patch makes changes so that these connections will now be made in the python configuration files associated with the protocols. This requires each state machine to expose the message buffers it uses for input and output. So, the patch makes these buffers configurable members of the machines. The patch drops the slicc code that usd to connect these buffers to the network. Now these buffers are exposed to the python configuration system as Master and Slave ports. In the configuration files, any master port can be connected any slave port. The file pyobject.cc has been modified to take care of allocating the actual message buffer. This is inline with how other port connections work.
2014-09-01ruby: Fixes clock domains in configuration filesEmilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
This patch fixes scripts related to ruby by adding the ruby clock domain. Now the L1 controllers and the Sequencer shares the cpu clock domain, while the rest of the components use the ruby clock domain. Before this patch, running simulations with the cpu clock set at 2GHz or 1GHz will output the same time results and could distort power measurements. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-08-10config: Fix cache latency param in mem testRadhika Jagtap
This patch fixes the cache latency in mem test which is split into two params, hit and response latency as per BaseCache.
2014-07-28arm: make the PseudoLRU tags the default for the O3_ARM_v7aL2Anthony Gutierrez
the Cortex-A15 has a random replacement policy for its L2 cache. see the Cortex-A15 Technical Reference Manual 1.7 About the L2 memory system. this patch makes the PseudoLRU tags the default for the ARM O3 CPU's L2 cache.
2014-07-23cpu: `Minor' in-order CPU modelAndrew Bardsley
This patch contains a new CPU model named `Minor'. Minor models a four stage in-order execution pipeline (fetch lines, decompose into macroops, decompose macroops into microops, execute). The model was developed to support the ARM ISA but should be fixable to support all the remaining gem5 ISAs. It currently also works for Alpha, and regressions are included for ARM and Alpha (including Linux boot). Documentation for the model can be found in src/doc/inside-minor.doxygen and its internal operations can be visualised using the Minorview tool utils/minorview.py. Minor was designed to be fairly simple and not to engage in a lot of instruction annotation. As such, it currently has very few gathered stats and may lack other gem5 features. Minor is faster than the o3 model. Sample results: Benchmark | Stat host_seconds (s) ---------------+--------v--------v-------- (on ARM, opt) | simple | o3 | minor | timing | timing | timing ---------------+--------+--------+-------- 10.linux-boot | 169 | 1883 | 1075 10.mcf | 117 | 967 | 491 20.parser | 668 | 6315 | 3146 30.eon | 542 | 3413 | 2414 40.perlbmk | 2339 | 20905 | 11532 50.vortex | 122 | 1094 | 588 60.bzip2 | 2045 | 18061 | 9662 70.twolf | 207 | 2736 | 1036
2014-06-30arm: make the bi-mode predictor the default for O3_ARM_v7a_BPAnthony Gutierrez
the branch predictor used in the Cortex-A15 is a bi-mode style predictor, see: http://arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf and http://nvidia.com/docs/IO/116757/NVIDIA_Quad_a15_whitepaper_FINALv2.pdf this patch makes the bi-mode predictor the default for the ARM O3 CPU.
2014-05-15config: remove unecessary assignment of etherlink interfacesAnthony Gutierrez
in makeDualRoot() the etherlink interfaces are set using the tsunami interface however, they are set again a few lines later based on whether or not the system is a realview or tsunami system; the original assignment is always overwritten or there will be a fatal. this seems like an artifact from when tsunami was the only type of system capable of running with the dual option.
2014-05-09config: Bump DRAM sweep bus speed to match DDR4 configAndreas Hansson
This patch bumps the bus clock speed such that the interconnect does not become a bottleneck with a DDR4-2400-x64 DRAM delivering 19.2 GByte/s theoretical max.
2014-04-19config: ruby: remove memory controller from network testNilay Vaish
It is not in use and not required as such.
2014-04-14arm: set default kernels for VExpress_EMM and VExpress_EMM64Anthony Gutierrez
2014-04-10config: add num-work-ids command line optionGedare Bloom
Adds the parameter --num-work-ids to Options.py and reads the parameter into the System params in Simulation.py. This parameter enables setting the number of possible work items to different than 16. Support for this parameter already exists in src/sim/System.py, so this changeset only affects the Python config files. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-01configs: use SimpleMemory when using ruby in se modeNilay Vaish
A recent changeset altered the default memory class to DRAMCtrl. In se mode, ruby uses the physical memory to check if a given address is within the bounds of the physical memory. SimpleMemory is enough for this. Moreover, SimpleMemory does not check whether it is connected or not, something which DRAMCtrl does.
2014-03-23mem: Rename SimpleDRAM to a more suitable DRAMCtrlAndreas Hansson
This patch renames the not-so-simple SimpleDRAM to a more suitable DRAMCtrl. The name change is intended to ensure that we do not send the wrong message (although the "simple" in SimpleDRAM was originally intended as in cleverly simple, or elegant). As the DRAM controller modelling work is being presented at ISPASS'14 our hope is that a broader audience will use the model in the future. --HG-- rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
2014-03-23mem: Change memory defaults to be more representativeAndreas Hansson
Make the default memory type DDR3-1600 x64, and use the open-adaptive page policy. This change is aiming to ensure that users by default are using a realistic memory system.
2014-03-23config: Add a DRAM efficiency-sweep scriptAndreas Hansson
This patch adds a configuration that simplifies evaluation of DRAM controller configurations by automating a sweep of stride size and bank parallelism. It works in a rather unconventional way, as it needs to print the traffic generator stimuli based on the memory organisation. Hence, it starts by configuring the memory, then it prints a traffic-generator config file, and loads it. The resulting stats have one period per data point, identified by the stride size, and the number of banks being used.
2014-03-23mem: More descriptive address-mapping scheme namesAndreas Hansson
This patch adds the row bits to the name of the address mapping schemes to make it more clear that all the current schemes places the row bits as the most significant bits.
2014-03-20ruby: garnet: convert network interfaces into clocked objectsNilay Vaish
This helps in configuring the network interfaces from the python script and these objects no longer rely on the network object for the timing information.
2014-03-20config: ruby: rename _cpu_ruby_ports to _cpu_portsNilay Vaish
2014-03-20config: fs.py: move creating of test/drive systems to functionsNilay Vaish
The code that creates test and drive systems is being moved to separate functions so as to make the code more readable. Ultimately the two functions would be combined so that the replicated code is eliminated.
2014-03-20config: remove ruby_fs.pyNilay Vaish
The patch removes the ruby_fs.py file. The functionality is being moved to fs.py. This would being ruby fs simulations in line with how ruby se simulations are started (using --ruby option). The alpha fs config functions are being combined for classing and ruby memory systems. This required renaming the piobus in ruby to iobus. So, we will have stats being renamed in the stats file for ruby fs regression.
2014-03-20ruby: no piobus in se modeNilay Vaish
Piobus was recently added to se scripts for ruby so that the interrupt controller can be connected to something (required since the interrupt controller sends address range messages). This patch removes the piobus and instead, the pio port of ruby port will now ignore the range change messages in se mode.
2014-03-17config: ruby: remove piobus from protocolsNilay Vaish
This patch removes the piobus from the protocol config files. The ports are now connected to the piobus in the Ruby.py file.
2014-02-24ruby: correct errors in changeset 4eec7bdde5b0Nilay Vaish
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch. Firstly, we create interrupt controllers in the se mode, but no piobus was being created. RubyPort, which earlier used to ignore range changes now forwards those to the piobus. The lack of piobus resulted in segmentation fault. This patch creates a piobus even in se mode. It is not created only when some tester is running. Secondly, I had missed out on modifying port connections for other coherence protocols.
2014-02-23ruby: route all packets through ruby portNilay Vaish
Currently, the interrupt controller in x86 is connected to the io bus directly. Therefore the packets between the io devices and the interrupt controller do not go through ruby. This patch changes ruby port so that these packets arrive at the ruby port first, which then routes them to their destination. Note that the patch does not make these packets go through the ruby network. That would happen in a subsequent patch.
2014-02-23config: topologies: slight code refactorNilay Vaish
2014-02-21config: ruby_random_test: updates due to recent unrelated changesNilay Vaish
2014-02-18arm: armv8 boot options to enable v8Anthony Gutierrez
Modifies FSConfig.py to enable ARMv8 compatibility. To boot gem5 with ARMv8: Download the v8 kernel, .dtb file, and root FS from: http://gem5.org/Download Download the ARMv8 toolchain, and add the bin dir to your path: http://www.linaro.org/engineering/engineering-projects/armv8 Build gem5 for ARM Build the v8 bootloader (in gem5/system/arm/aarch64_bootloader) Make script in gem5/system/arm/aarch64_bootloader will require v8 toolchain, drop the produced boot_emm.arm64 in $(M5_PATH)/binaries/ Run: $ build/ARM/gem5.fast configs/example/fs.py --machine-type=VExpress_EMM64 \ --kernel=/path/to/kernel/vmlinux-linaro-tracking \ --dtb-filename=/path/to/dtb/rtsm_ve-aemv8a.dtb \ --disk-image=/path/to/img/linaro-minimal-armv8.img