summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-09-12config, dev-arm: Fix UART handling baremetal modeCiro Santilli
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform due to inconsistent UART naming with error message: AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart' Consistently name keep all UARTs in the Arm platforms in a vector named 'uart' or as a single device named 'uart'. Update the configuration scripts to reflect the fact that 'uart' can be a vector. Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12473 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-12cpu: Replace the fastmem with a new CPU modelAndreas Sandberg
The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-09-10configs: Use the same address ranges for dir and mem_ctrlsNikos Nikoleris
In Ruby, for every directory we create one memory controller for every range in the memory ranges. Previously the memory controllers and the directories created their address ranges independently and as a result a mismatch was possible. In fact, we assinged an interleaved address range with hasing for the memory controllers while the corresponding directories would be assigned the same interleaved address range without hashing. This change uses the address range of the memory controllers to populate the list of address ranges for the corresponding directory and avoid bugs due to code duplication. Change-Id: I1e321c81a254199e5aaa9f3b81f4a4642c60a67a Reviewed-on: https://gem5-review.googlesource.com/12318 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-09-03config: Move KVM CPU checking to CpuConfig helper moduleAndreas Sandberg
Both se.py and fs.py need to check if a CPU is a KVM CPU. This is somewhat involved since CPUs can be disabled at compile time. Enable better code reuse by moving it to the CpuConfig module. Change-Id: I47b1512ecb62e757399a407a0e41be83b9f83be3 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12418 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-08-17configs: Always exit with code 0Jason Lowe-Power
Update simulation.py to always exit with code 0 assuming the simulation exits normally. If the running application has a return code that is non zero, then print the return code before exiting. Change-Id: I1983985d50311627574d4364b32ee961ae88e003 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/4880
2018-07-13configs: Update the DRAM sweep script to use PyTrafficGenAndreas Sandberg
Instead of generating a text configuration, use the new Python-based traffic generator. Change-Id: I6fb88ec45b74bb87470aa265af18b5a2ff24c314 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/11519 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2018-05-31mem-cache: Add a non-coherent cacheNikos Nikoleris
The class re-uses the existing MSHR and write queue. At the moment every single access is handled by the cache, even uncacheable accesses, and nothing is forwarded. This is a modified version of a changeset put together by Andreas Hansson <andreas.hansson@arm.com> Change-Id: I41f7f9c2b8c7fa5ec23712a4446e8adb1c9a336a Reviewed-on: https://gem5-review.googlesource.com/8291 Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
2018-05-16style: fix amd license and style issuesTony Gutierrez
Change-Id: I26136fb49f743c4a597f8021cfd27f78897267b5 Reviewed-on: https://gem5-review.googlesource.com/10463 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-04-12configs, mem-ruby: fix issues with style in AMD licenseTony Gutierrez
fixes line length and white space issues. Change-Id: Ia04a91ec68cae2bcdabeb93bb1a0f74e8e5486c3 Reviewed-on: https://gem5-review.googlesource.com/9801 Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com> Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
2018-03-23learning_gem5: Add a simple config for MI_exampleJason Lowe-Power
Adds a new config script to configure the MI_example protocol. This script closely follows the script used for MSI, but instead supports the MI_example protocol. This script works with the simple_ruby runscript and can be included instead of msi_caches. Change-Id: I8be0be67bf51369763ba103a5f101cfc01ad8859 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8945 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-03-23learning_gem5: Ruby random tester files for MSIJason Lowe-Power
Adds a pair of scripts to run the Ruby random tester with the MSI protocol. This code follows Learning gem5 Part 3. http://learning.gem5.org/book/part3/index.html Change-Id: I15550a36618546f0354163b0216cf771f434ed84 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8944 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-03-23learning_gem5: Add config files for MSI protocolJason Lowe-Power
Adds the required configuration files to run the MSI protocol. These config files are much simpler than the current Ruby examples and follow the pattern in the other Learning gem5 run scripts. By default, this script runs with two CPUs and runs the recently added thread test binary. Currently, only SE mode is supported. This code follows Learning gem5 Part 3. http://learning.gem5.org/book/part3/index.html Change-Id: I813a3153d49e47198444c38a6af30269bd1310cd Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8943 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-03-22mem-cache: Split array indexing and replacement policies.Daniel R. Carvalho
Replacement policies (LRU, Random) are currently considered as array indexing methods, but have completely different functionalities: - Array indexers determine the possible locations for block allocation. This information is used to generate replacement candidates when conflicts happen. - Replacement policies determine which of the replacement candidates should be evicted to make room for new allocations. For this reason, they were split into different classes. Advantages: - Easier and more straightforward to implement other replacement policies (RRIP, LFU, ARC, ...) - Allow easier future implementation of cache organization schemes As now we can't assure the use of sets, the previous way to create a true LRU is not viable. Now a timestamp_bits parameter controls how many bits are dedicated for the timestamp, and a true LRU can be achieved through an infinite number of bits (although a few bits suffice in practice). Change-Id: I23750db121f1474d17831137e6ff618beb2b3eda Reviewed-on: https://gem5-review.googlesource.com/8501 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-03-20arch-arm, configs: Treat the bootloader rom as cacheable memoryNikos Nikoleris
Prior to this changeset the bootloader rom (instantiated as a SimpleMemory) in ruby Arm systems was treated as an IO device and it was fronted by a DMA controller. This changeset moves the bootloader rom and adds it to the system as another memory with a dedicated directory controller. Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/8741 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-03-13learning_gem5: Update README for Learning gem5Jason Lowe-Power
Change-Id: I94485e401bc77207cab68c1e24ef7a6ed83bd43d Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8946 Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
2018-03-06config: Switch from the print statement to the print function.Gabe Black
Change-Id: I701fa58cfcfa2767ce9ad24da314a053889878d0 Reviewed-on: https://gem5-review.googlesource.com/8762 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-02configs: Fix L3Cache instantiation in lat_mem_rd.pyNikos Nikoleris
This changeset updates the lat_mem_rd.py to configure the L3Cache using the split tag_latency, data_latency parameters. Change-Id: I8bc41d5f7664111bdda0972356d1a17762aa77e5 Reviewed-on: https://gem5-review.googlesource.com/8288 Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
2018-02-05config: remove dead code in fs.pyNayan Deshmukh
We have not added the --generate-dtb option for non-ARM systems and hence this case becomes dead code. It also leads to error on non-ARM systems as is tries to access a non existent field. Change-Id: Ia926bd0c61efa275bc5e3864b8a9c3ffb7aa3cb5 Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-on: https://gem5-review.googlesource.com/7801 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-29config, arm: enable device tree autogeneration for bigLITTLECurtis Dunham
Change-Id: Iaa5eeb3504b3ff9e46b6f592a06d6b833c830d83 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5969 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-29config: Embed Device Tree generation in fs.py configGlenn Bergmans
Equips the fs.py config routine with an extra commandline option --generate-dtb that will generate a dtb file automatically before running the simulation. Only works with ARM systems and gives a warning if the simulated system is not of --machine-type VExpress_GEM5_V1. Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5968 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-10configs: Fill in the cpu.isa field in etrace_replay.py since no default are ↵Chen Zou
provided now Change-Id: I5f337b9969820bd74ed67e576e2d1a8e4666ecdb Reviewed-on: https://gem5-review.googlesource.com/7021 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-08gpu-compute: call createThreads() on cpu objs in apu_se.pyTony Gutierrez
commit 8ad26e2688b8736f9290086bb4026cc7500429e9 cpu: Don't override ISA if provided by user removed the default ISA from the BaseCPU, and instead relies on createThreads() to initiate a default ISA if none is specified. the apu_se.py script, however does not call creatThreads() leading to a fatal when constructing CPU objects. this patch adds the appropriate calls to createThreads() inside apu_se.py. Change-Id: I16a5929454c59d68a3f1b7b3858c48a70cb76412 Reviewed-on: https://gem5-review.googlesource.com/7101 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-01-02config: Handle NULL simobject parameters in read_config.py.Gabe Black
Change-Id: If0f87e8ee37099be4d0f3567db4fc34f8467e409 Reviewed-on: https://gem5-review.googlesource.com/6943 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-02config: Fix parsing AddrRange parameters in read_config.py.Gabe Black
The format of AddrRange parameters was changed, but config/example/read_config.py wasn't updated for the new format. Change-Id: Ie0da7aaa47c827bacc2b4f7f44929efd868b8794 Reviewed-on: https://gem5-review.googlesource.com/6942 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-02config: Add a --checkpoint-dir argument to read_config.py.Gabe Black
This argument lets the user restore a checkpoint after loading simulator state from config.ini. Change-Id: I6e0630d75b798a1d2536e2408660843f57f46c4b Reviewed-on: https://gem5-review.googlesource.com/6941 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-12-15mem-ruby: Support atomic_noncaching acceses in rubySwapnil Haria
Ruby has no support for atomic_noncaching accesses, which prevents using it with kvm-cpu. This patch fixes this by directly forwarding atomic requests from the ruby port/sequencer to the corresponding directory based on the destination address of the packet. Change-Id: I0b4928bfda44fd9e5e48583c51d1ea422800da2d Reviewed-on: https://gem5-review.googlesource.com/5601 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
2017-12-12config: Fix need to set ISA of switch cpus.Austin Harris
Since BaseCPU.createThreads() no longer overrides the BaseCPU.isa parameter, switch_cpus should have the ISA copied. This fixes a fatal error in BaseCPU when restoring from a checkpoint. Change-Id: I4fdcacb76da46bdbe1ce37dcf05c5a6a8a9e5237 Signed-off-by: Austin Harris <austinharris@utexas.edu> Reviewed-on: https://gem5-review.googlesource.com/6241 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-12-05config, mem, hmc: fix HMC test scriptÉder F. Zulian
This patch keeps the logic behind the HMC model implementation untouched. Additional changes: - simple hello world script using HMC (SE simulation) Usage examples: ./build/ARM/gem5.opt configs/example/hmctest.py ./build/ARM/gem5.opt configs/example/hmctest.py --enable-global-monitor --enable-link-monitor --arch=same ./build/ARM/gem5.opt configs/example/hmctest.py --enable-global-monitor --enable-link-monitor --arch=mixed ./build/ARM/gem5.opt configs/example/hmc_hello.py ./build/ARM/gem5.opt configs/example/hmc_hello.py --enable-global-monitor --enable-link-monitor Change-Id: I64eb6c9abb45376b6ed72722926acddd50765394 Reviewed-on: https://gem5-review.googlesource.com/6061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-12-05learning_gem5: Adding code for SimpleCacheJason Lowe-Power
This is the rest of the code for part 2. See http://learning.gem5.org/book/part2/simplecache.html Change-Id: I5db099266a1196914656be3858fdd5fb4f8eab48 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5023 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Adds the simple MemObject codeJason Lowe-Power
Adding more code from Learning gem5 Part II See http://learning.gem5.org/book/part2/memoryobject.html Change-Id: Iaa9480c5cdbe4090364f02e81dc1d0a0ddac392a Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5022 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Add code for hello-goodbye exampleJason Lowe-Power
Adding more code from Learning gem5 Part II See http://learning.gem5.org/book/part2/parameters.html Change-Id: I9fe5655239e011c718c5cf5fd62bebcda66ea966 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5021 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2017-12-05learning_gem5: Add code for simple SimObjectJason Lowe-Power
This adds code from Learning gem5 Part II. See http://learning.gem5.org/book/part2/helloobject.html Change-Id: Ic2caa07876ca57f937729c27ce29b2cd8bf2380c Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5020 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-16tests: Add tests for DRAM low power modesRadhika Jagtap
This patch adds two regression tests that execute the script in the configs dir for triggering low power mode transitions. A separate test is required for each page policy because for close-adaptive page policy the DRAM goes into the Precharge Power-down mode while for open-adaptive page policy it goes into the Activate Power-down mode. Change-Id: Iad61af23f132db046f2857cc3ef64b2bf42cf5e4 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5726 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-16config: Add low power sweep for DRAMRadhika Jagtap
This change adds a Python script to sweep a few parameters with a goal to trigger transitions to the low power states of the DRAM controller. This script is largely based on the sweep.py but is helpful to study the impact of inter-transaction delay on the behaviour of the DRAM in addition to typical sweep params like stride size, bank utilization and read percent. An idle period is added as the last traffic generator state to target hitting self-refresh. Change-Id: I34380afffbf2de9f4e997dfe9fff5e615e077524 Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5725 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-13config: Fix the "script" SysPath functor.Gabe Black
This particular functor looks in the config root, not in the path specified by M5_ROOT like binary and disk. Change-Id: Ib007c36934c65ca9f808e995a2e0c71f0b338788 Reviewed-on: https://gem5-review.googlesource.com/5641 Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-10-31config: Rework the SysPaths functions into functors.Gabe Black
These functions were already being treated as psuedo objects and had properties assigned to them setting what their paths were. That's a bit unusual and made it less obvious what the code was doing, but also forced the "system" function to know what all the possible path searching functions were so that they'd have their "path" property initialized properly in a central location. This change introduces a PathSearcFunc class which encapsulates the mechanisms of the old code and makes it implicitly extensible so that other path searching functions which might look in other directories can be added in other places. Change-Id: I7be28e51481a06ec83997677af99927709b18003 Reviewed-on: https://gem5-review.googlesource.com/5341 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-08-03configs, arm: Fix incorrect use of mem_range in bL exampleAndreas Sandberg
The change "config: Change mem_range attribute naming in ARM SimpleSystem" modified the SimpleSystem class to be compatible with the MemConfig utility script. While doing so, the way we report the memory ranges supported by the system changed, which broke the bL example configration. This changeset introduces the necessary changes to make the script work again. Change-Id: I789987950ff04b6c5ae1c8b807355bcba34f6b3c Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4380 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-08-03arm, config: Fix CPU names in ARM example configsAndreas Sandberg
The ARM example configs used to rely on CPU aliases for the AtomicSimpleCPU and KVM when configuring clusters. This broken when support for CPU aliases was removed ('config: Remove support for CPU aliases.'). This change updates the config scripts to use the full class names instead. Change-Id: If36c46207f39ca1897ecf77d9588f1c059819e63 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4360 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-08-01arch-arm: Switch to DTOnly as the default machine typeAndreas Sandberg
Old ARM systems used to pass the machine type in the ATAGS list passed to the kernel. This has been largely deprecated by the introduction of device trees. Switch to the DTOnly machine type by default in gem5 since all new platforms and kernel will require this behavior. Change-Id: Icfd085e4862863b4ef495566bfddbd11591866c3 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4260 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-07-28config: Discover CPU timing models based on target ISAAndreas Sandberg
The CpuConfig helper currently assumes that all timing models live in the cores.arm package. This ignores the potential mismatch between the target ISA and the ISA assumptions made by the timing models. Instead of unconditionally listing all CPU models in cores.arm, list timing models from cores.generic and cores.${TARGET_ISA}. This ensures that the listed timing models support the ISA that gem5 is targeting. Change-Id: If6235af2118889638f56ac4151003f38edfe9485 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3947 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-27config, arm: SE configuration for the ARM starter kitGabor Dozsa
Add a full system example configuration for the ARM Research Starter Kit on System Modeling. More information can be found at: http://www.arm.com/ResearchEnablement/SystemModeling Change-Id: Ia32a28eb713ba7050d790327ba6dbb73ec33b53a Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com> [ Minor cleanups and more documentation ] Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4203 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-27config, arm: FS configuration for the ARM starter kitGabor Dozsa
Add a full system example configuration for the ARM Research Starter Kit on System Modeling. More information can be found at: http://www.arm.com/ResearchEnablement/SystemModeling Change-Id: Ifa40419d21923a32bb383d58466e421fe4260ddd Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com> [ Minor cleanups and more documentation ] Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4202 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-27config, arm: Add a high-performance in order timing modelAshkan Tousi
The High-Performance In-order (HPI) CPU timing model is tuned to be representative of a modern in-order ARMv8-A implementation. The HPI core and its supporting simulation scripts, namely starter_se.py and starter_fs.py (under /configs/example/arm/) are part of the ARM Research Starter Kit on System Modeling. More information can be found at: http://www.arm.com/ResearchEnablement/SystemModeling Change-Id: I124bd06ba42d20abff09d447542b031d17eabe22 Signed-off-by: Ashkan Tousi <ashkan.tousimojarad@arm.com> Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4201 Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-07-27config: Change mem_range attribute naming in ARM SimpleSystemGabor Dozsa
MemConfig.config() expects memory ranges to be defined in a particular way. This patch changes the naming of the mem_range attribute in SympleSystem to enable use of MemConfig for configuring the memory. Change-Id: I4964c136e53a99c69ff5e086cacb929aa435168d Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com> Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/4200 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-25configs,sim-se: fix se.py multi-cpu multi-cmd issuePau Cabre
Assign different pids to the different commands specified with the "--cmd" flag to configs/example/se.py Without this change, the following command line triggers a "fatal: _pid 100 is already used" error: command=$PWD/tests/test-progs/hello/bin/arm/linux/hello ./build/ARM/gem5.opt configs/example/se.py -n 2 -c "$command;$command" Change-Id: If6f726481eb196d4f42680b6aa46364fce4190ed Signed-off-by: Pau Cabre <pau.cabre@metempsy.com> Reviewed-on: https://gem5-review.googlesource.com/4160 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2017-07-05cpu: Added interface for vector reg fileRekai Gonzalez-Alberquilla
This patch adds some more functionality to the cpu model and the arch to interface with the vector register file. This change consists mainly of augmenting ThreadContexts and ExecContexts with calls to get/set full vectors, underlying microarchitectural elements or lanes. Those are meant to interface with the vector register file. All classes that implement this interface also get an appropriate implementation. This requires implementing the vector register file for the different models using the VecRegContainer class. This change set also updates the Result abstraction to contemplate the possibility of having a vector as result. The changes also affect how the remote_gdb connection works. There are some (nasty) side effects, such as the need to define dummy numPhysVecRegs parameter values for architectures that do not implement vector extensions. Nathanael Premillieu's work with an increasing number of fixes and improvements of mine. Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> [ Fix RISCV build issues and CC reg free list initialisation ] Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2705
2017-07-04config, arm: Don't import timing models for missing CPUsAndreas Sandberg
When importing the cores.arm package, we currently throw an exception if a timing model can't be imported due to a missing dependency (e.g., the required CPU model wasn't included in the build). This is undesirable since it prevents other, working, timing models from being added to the package. Wrap the import_module call in a try-except block and skip timing models that have missing dependencies. Change-Id: I92bab62c989f433a8a4a7bf59207d9d81b3d19e1 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3946 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-03config: Clean up core timing model discoveryAndreas Sandberg
Instead of hard-coding timing models in CpuConfig.py, use introspection to find them in the cores.arm model package. Change-Id: I6642dc9cbc3f5beeeec748e716c9426c233d51ea Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3944 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-03config: Move core timing models to config/common/coresAndreas Sandberg
Change-Id: I189b6462cc64f7cc6c1b7a6c2af1abb60e1854de Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3943 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-07-03config: Make ex5_*.py independent of old configsAndreas Sandberg
The ex5_LITTLE and ex5_big configs currently depend on Caches.py and O3_ARM_v7a.py. These aren't actual dependencies since all of the params from the caches and the old O3 model are overridden. This changeset updates the ex5 models to derive from the base SimObjects instead. Change-Id: I999e73bb9cc21ad96865c1bc0dd5973faa48ab61 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com> Reviewed-on: https://gem5-review.googlesource.com/3942 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 04:59:55 +0000