Age | Commit message (Collapse) | Author |
|
base/traceflags.py:
added some more traceflags for ethernet to break it up better
dev/etherpkt.hh:
since we are not network host order, must reverse bytes for these typechecks.
also, overload isTcp/UdpPkt to take an argument so you don't have to reget the ip header if you've already got one.
dev/ns_gige.cc:
1) add some functions that reverse Endianness so we can generate adn evaluate checksum adn dprintf data accurately/more understandably
2) forget about the implementation of fifo fill/drain thresholds, it's not used by the driver much, nor does it matter with use sending/receiving in whole packets anyway.
get rid of teh associated variables.
3) get rid of txFifoCnt the variable, it's redundant and unnecessary, just use txFifoAvail.
4) change io_enable to ioEnable, just to be picky.
5) modify some DPRINTF's to be clearer, also added a lot, and spread them into better traceflag categories
6) fix the device bug! it's the intrTick = 0 at teh beginning of cpuInterrupt().
7) clear some bools in regsReset() so they don't holdover wrong state
8) fix pseudo header generation for Tcp checksumming to account for network order
dev/ns_gige.hh:
change io_enable to ioEnable, get rid of fill/drain thresh related variables and txFifoCnt, which is redundant
--HG--
extra : convert_revision : c538b75731f3c9e04354f57e6df9a40aeca5096d
|
|
tests
dev/ide_ctrl.cc:
Formatting
dev/ide_disk.cc:
Remove some junk, add an assert to serialize, and add missing serialize
for command register.
--HG--
extra : convert_revision : 8f99857e32f278dd4e6f23deffc8047c6411d5b2
|
|
--HG--
extra : convert_revision : aecf09b3b13a23ffef852a1539e8d4eec32008ad
|
|
builds
dev/ide_ctrl.cc:
added #if to remove variables that are optimized out.
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Updated serialization code
--HG--
extra : convert_revision : b322a3299097cbd05b9b5bb8b0a80e9fa33bdc20
|
|
dev/ide_ctrl.cc:
generalize these #defs
dev/ide_ctrl.hh:
put these in pcireg.h
dev/ns_gige.cc:
do i need io_enable? and assert will fail if i actually need to implement it, which may give clue as to wehtehr i need to implmeent the mem_enable and bm_enable stuff.
dev/ns_gige.hh:
implement this in case it's needed
dev/pcireg.h:
put these defs in pcireg instead
--HG--
extra : convert_revision : 5e3581b5da17410f943907139bd479f15d2231e8
|
|
dev/ns_gige.cc:
fix serialization and move regsReset into the cc file
dev/ns_gige.hh:
put regsReset into cc instead of here in hh
--HG--
extra : convert_revision : 3a8796fa583e0765503104a9dbe28cc69f1a8fa9
|
|
busbridges. Also small fix for gcc 3.3.3.
dev/etherpkt.hh:
Gcc 3.3.3 wants assert.h to be include in this file.
dev/ide_ctrl.cc:
after unserialization we need to tell the busbridges what addresses to
respond to.
--HG--
extra : convert_revision : a421197a5be07761bdef571d0a9406d77788e270
|
|
into lush.(none):/z/hsul/work/linux
--HG--
extra : convert_revision : 30b93e7a4548a00ba18e86aad85df4c790f51d43
|
|
struct defs into ined_hdrs.hh
3) add some new functions to etherpkt. 4) checkin the nice ping_linux.ini that i've been using.
dev/etherpkt.hh:
remove the packet headers nate hated so much.
also add some new functionality regarding packets, like isIpHdr(), etc.
dev/ns_gige.cc:
improve the code given the nice new functions offered in etherpkt
--HG--
extra : convert_revision : 2e27f5a8dca5323c0fa22d3c51af44a35f6be1a2
|
|
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
|
|
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_linux_process.hh:
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
arch/alpha/alpha_tru64_process.cc:
arch/alpha/alpha_tru64_process.hh:
arch/alpha/aout_machdep.h:
arch/alpha/arguments.cc:
arch/alpha/arguments.hh:
arch/alpha/faults.cc:
arch/alpha/faults.hh:
arch/alpha/isa_traits.hh:
arch/alpha/osfpal.cc:
arch/alpha/osfpal.hh:
arch/alpha/pseudo_inst.cc:
arch/alpha/pseudo_inst.hh:
arch/alpha/vptr.hh:
arch/alpha/vtophys.cc:
arch/alpha/vtophys.hh:
base/bitfield.hh:
base/callback.hh:
base/circlebuf.cc:
base/circlebuf.hh:
base/compression/lzss_compression.cc:
base/compression/lzss_compression.hh:
base/compression/null_compression.hh:
base/cprintf.cc:
base/cprintf.hh:
base/cprintf_formats.hh:
base/date.cc:
base/dbl_list.hh:
base/endian.hh:
base/fast_alloc.cc:
base/fast_alloc.hh:
base/fifo_buffer.cc:
base/fifo_buffer.hh:
base/hashmap.hh:
base/hostinfo.cc:
base/hostinfo.hh:
base/hybrid_pred.cc:
base/hybrid_pred.hh:
base/inet.cc:
base/inet.hh:
base/inifile.cc:
base/inifile.hh:
base/intmath.cc:
base/intmath.hh:
base/loader/aout_object.cc:
base/loader/aout_object.hh:
base/loader/ecoff_object.cc:
base/loader/ecoff_object.hh:
base/loader/elf_object.cc:
base/loader/elf_object.hh:
base/loader/object_file.cc:
base/loader/object_file.hh:
base/loader/symtab.cc:
base/loader/symtab.hh:
base/misc.cc:
base/misc.hh:
base/mod_num.hh:
base/mysql.cc:
base/mysql.hh:
base/pollevent.cc:
base/pollevent.hh:
base/predictor.hh:
base/random.cc:
base/random.hh:
base/range.cc:
base/range.hh:
base/refcnt.hh:
base/remote_gdb.cc:
base/remote_gdb.hh:
base/res_list.hh:
base/sat_counter.cc:
base/sat_counter.hh:
base/sched_list.hh:
base/socket.cc:
base/socket.hh:
base/statistics.cc:
base/statistics.hh:
base/stats/events.cc:
base/stats/events.hh:
base/stats/flags.hh:
base/stats/mysql.cc:
base/stats/mysql.hh:
base/stats/mysql_run.hh:
base/stats/output.hh:
base/stats/statdb.cc:
base/stats/statdb.hh:
base/stats/text.cc:
base/stats/text.hh:
base/stats/types.hh:
base/stats/visit.cc:
base/stats/visit.hh:
base/str.cc:
base/str.hh:
base/time.cc:
base/time.hh:
base/trace.cc:
base/trace.hh:
base/userinfo.cc:
base/userinfo.hh:
cpu/base_cpu.cc:
cpu/base_cpu.hh:
cpu/exec_context.cc:
cpu/exec_context.hh:
cpu/exetrace.cc:
cpu/exetrace.hh:
cpu/full_cpu/op_class.hh:
cpu/full_cpu/smt.hh:
cpu/inst_seq.hh:
cpu/intr_control.cc:
cpu/intr_control.hh:
cpu/memtest/memtest.cc:
cpu/memtest/memtest.hh:
cpu/pc_event.cc:
cpu/pc_event.hh:
cpu/simple_cpu/simple_cpu.cc:
cpu/simple_cpu/simple_cpu.hh:
cpu/static_inst.cc:
cpu/static_inst.hh:
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/baddev.cc:
dev/baddev.hh:
dev/disk_image.cc:
dev/disk_image.hh:
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherdump.cc:
dev/etherdump.hh:
dev/etherint.cc:
dev/etherint.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/etherpkt.cc:
dev/etherpkt.hh:
dev/ethertap.cc:
dev/ethertap.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/io_device.cc:
dev/io_device.hh:
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/pcireg.h:
dev/platform.cc:
dev/platform.hh:
dev/simple_disk.cc:
dev/simple_disk.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.hh:
dev/tsunamireg.h:
docs/stl.hh:
kern/linux/linux.hh:
kern/linux/linux_syscalls.cc:
kern/linux/linux_syscalls.hh:
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/system_events.cc:
kern/system_events.hh:
kern/tru64/dump_mbuf.cc:
kern/tru64/dump_mbuf.hh:
kern/tru64/mbuf.hh:
kern/tru64/printf.cc:
kern/tru64/printf.hh:
kern/tru64/tru64.hh:
kern/tru64/tru64_events.cc:
kern/tru64/tru64_events.hh:
kern/tru64/tru64_syscalls.cc:
kern/tru64/tru64_syscalls.hh:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/async.hh:
sim/builder.cc:
sim/builder.hh:
sim/debug.cc:
sim/debug.hh:
sim/eventq.cc:
sim/eventq.hh:
sim/host.hh:
sim/main.cc:
sim/param.cc:
sim/param.hh:
sim/process.cc:
sim/process.hh:
sim/serialize.cc:
sim/serialize.hh:
sim/sim_events.cc:
sim/sim_events.hh:
sim/sim_exit.hh:
sim/sim_object.cc:
sim/sim_object.hh:
sim/stat_control.cc:
sim/stat_control.hh:
sim/stats.hh:
sim/syscall_emul.cc:
sim/syscall_emul.hh:
sim/system.cc:
sim/system.hh:
sim/universe.cc:
test/bitvectest.cc:
test/circletest.cc:
test/cprintftest.cc:
test/initest.cc:
test/lru_test.cc:
test/nmtest.cc:
test/offtest.cc:
test/paramtest.cc:
test/rangetest.cc:
test/sized_test.cc:
test/stattest.cc:
test/strnumtest.cc:
test/symtest.cc:
test/tokentest.cc:
test/tracetest.cc:
util/m5/m5.c:
util/m5/m5op.h:
util/tap/tap.cc:
Updated Copyright
dev/console.cc:
dev/console.hh:
This code isn't ours, and shouldn't have our copyright
--HG--
extra : convert_revision : 598f2e5eab5d5d3de2c1e862b389086e3212f7c4
|
|
dev/tsunami_io.cc:
Timers don't need to be rescheduled cause they aren't scheduled by
the default constructor
--HG--
extra : convert_revision : afb68e4f0c4e2a2c98f0037e061752690080a503
|
|
into zower.eecs.umich.edu:/z/alschult/DiskModel/linux
--HG--
extra : convert_revision : b23a1d1a79ac5c593150d269d0523c474cf6a4a0
|
|
dev/ide_ctrl.cc:
Properly serialize/unserialize the PciDev base class to get it to remap
the MMU
dev/ns_gige.cc:
dev/ns_gige.hh:
Remove the "addr" paramter from the constructor and change the device
to use PCI based MMU mappings only
dev/pciconfigall.cc:
Change comments
dev/pcidev.cc:
Properly setup the MMU after a serialize
--HG--
extra : convert_revision : 4b2e7ba58e3c24fac1ff6f80635e704d6ecc0eff
|
|
dev/console.cc:
dev/tsunami_io.cc:
dev/tsunami_uart.cc:
fixed serialization
--HG--
extra : convert_revision : 1608a116b00007922fa382ddb0c10442a8724f8d
|
|
dev/tsunami_pchip.cc:
SCCS merged
--HG--
extra : convert_revision : 064e3bab82aacf813d1f049d72429fd990608044
|
|
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/pcireg.h:
dev/platform.cc:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
kern/linux/linux.hh:
kern/linux/linux_syscalls.cc:
kern/linux/linux_syscalls.hh:
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Updated copyright
dev/tsunamireg.h:
Updated copyright and fixed a ULL
--HG--
extra : convert_revision : 4800bd227c7064044ee98169d6a91f74c791956f
|
|
Linux 2.6 with DMA support
dev/ide_disk.cc:
Add debug infomation for DMA transfers and fix handling of PRD pointer
values
dev/ide_disk.hh:
Reduce buffer (MAX_DMA) size to 64K
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
Add handling of PCTL register and also fix the translate from PCI to DMA
addresses which was incorrect
--HG--
extra : convert_revision : 562f55fa1c7099ad0f5a23f59dec2c8ec7601d43
|
|
virtual function in alphaaccess.cc
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_io.hh:
Removed dynamic cast to get interrupt frequency and replaced with a
virtual function
--HG--
extra : convert_revision : 01f514a33d8f76c6527ab25a713d5c86f9fd646e
|
|
into zower.eecs.umich.edu:/z/alschult/DiskModel/linux
--HG--
extra : convert_revision : 44678cd6aa2fa9e381d5d719d227013f5eb2a45c
|
|
PIO writes. This was mainly related to not shadowing the status register
properly, and also not setting some of the status bits expected by the
operating system for the PIO write protocol.
--HG--
extra : convert_revision : fcdfd588be6e4f237aa6057889f0b3bdf4ea7631
|
|
dev/tsunami_cchip.hh:
clean up some comments
kern/linux/linux_syscalls.cc:
Cleaned up spacing of syscall numbers
kern/linux/linux_system.hh:
Added doxygen comments
--HG--
extra : convert_revision : 23ecdaa92a208458dd5c5d3c68ac9012ce2690da
|
|
dev/baddev.hh:
dev/pcidev.hh:
dev/tsunami.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
Added doxygen comments
dev/pciconfigall.hh:
Added doxygen comments. Made the hlist of devices private and provided
members to modify the data.
dev/pcidev.cc:
updated for change in pciconfigall
dev/tsunami_pchip.cc:
Deleted commented out code we don't need
kern/linux/linux_syscalls.cc:
Simplified the number -> name conversion.
kern/linux/linux_syscalls.hh:
Removed StandardNumber and replaced with Number.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
LinuxSkipIdeDelay50msEvent was simply the same as the SkipFunc event,
so I removed it. Same with with LinuxSkipFuncEvent.
--HG--
extra : convert_revision : 1508c335f87d90373f5772f3a0407ea13e858d7e
|
|
--HG--
extra : convert_revision : 9168d939d4e707b00be6609368b592a0829a7226
|
|
Removed bootloader and just wrote command line into linux kernel
base/inifile.cc:
the forked process should not return, it should exit.
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
The serial port in reality has some delay and linux expects it. This
schedules an interrupt 300 cycles after the transmit instead of
immediately
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
removed boot loader and stuck boot command line in the kernel manually
--HG--
extra : convert_revision : 68aa54f8ca4e8391789f7a4c1ae227e6f8b94e13
|
|
well.
dev/ns_gige.cc:
remove some useless DPRINTF's and add some useful ones. fix the missing RXDESC interrupt.
--HG--
extra : convert_revision : 17142480db1eaafa24f88640f8c7b8e7e077de1a
|
|
into zower.eecs.umich.edu:/.automount/zizzer/z/alschult/DiskModel/linux
--HG--
extra : convert_revision : 67753db3defad3c44640df09a9465670f1667800
|
|
dev/ide_disk.cc:
Fix to PIO writes and also add command needed for shutdown
dev/pcidev.cc:
Change the panic on write to read-only registers to a debug print. The
kernel tries to write back over all of the PCI registers to restore
the saved SRM state, so we need to let it do this without panicing.
sim/system.cc:
Add back increment of number of running systems to allow trap of halt
work correctly.
--HG--
extra : convert_revision : 84aba4effbec14545f3610c19a8e321d7e7f7cf2
|
|
doesn't conflict with the old ethernet driver name.
Added config file to try to boot Tru64 with Tsunami
Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
the Syscalls still used the Tru64 calls, oops.. fixed.
--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
|
|
--HG--
extra : convert_revision : 2e8afcfe3448d921b26ebb76e65c0b237339e9b1
|
|
--HG--
extra : convert_revision : 28f1703f8d7d8cf33fb952ae450f66bdba860fb7
|
|
if Tru64 is to continue to be supported on Turbolaser) and fixed
translation of physical addresses by clearing PA<42:35> when the real
uncachable bit (43) is set
arch/alpha/ev5.hh:
Change to support 256 ASNs and seperate VA_SPACE checks for EV5 and EV6
also add support proper translation of uncacheable physical addresses
dev/ide_ctrl.cc:
Fix to work with real address translation
--HG--
extra : convert_revision : aa3d1c284b8271d4763a8da2509c91bbcf83189a
|
|
dev/ns_gige.cc:
clear the device interrupts
dev/ns_gige_reg.h:
Add a new mask
--HG--
extra : convert_revision : ce3617315677cbee577ed8893821a8abc5a1a10d
|
|
kern/linux/linux_system.cc:
merged
--HG--
extra : convert_revision : 81ef6a46f76968985f44c72f296a79ea77e73d12
|
|
dev/console.cc:
commented out code that checks if an interrupt is happening before issuing one
because they can get lost when linux boots
dev/console.hh:
added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
Added virtual functions to post console interrupts
dev/tsunami_io.cc:
allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
moved TsunamiUart to PioDevice
various little fixes to make linux work
dev/tsunami_uart.hh:
Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
commented out waiting for gdb
--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
|
|
dev/ide_ctrl.cc:
Added serialize/unserialize functions and move some inlined functions
to regular functions
dev/ide_ctrl.hh:
Change inlined functions to regular functions
dev/ide_disk.cc:
Changes to dmaWrite and also add serialize/unserialize functions
dev/ide_disk.hh:
Support for serializing/unserializing
--HG--
extra : convert_revision : 40e016dc7f6637b033fe33409338437c985a05f4
|
|
into shizzle.(none):/home/hsul/work/linux
--HG--
extra : convert_revision : 729b97489f990bffd23add762582b73d2eb2137d
|
|
into zower.eecs.umich.edu:/.automount/zizzer/z/alschult/DiskModel/linux
--HG--
extra : convert_revision : 879834af81a124b1f1b546f1591713a8c36913e4
|
|
mappings (writes still unverified, and read could probably be looked over
a bit more too)
dev/ide_disk.cc:
dev/ide_disk.hh:
Major changes to fix bogus handling of dma transfers. The read seems to
work pretty well, but the write is unverfied until we can get a disk
image that actually tries to write.
dev/tsunami_pchip.cc:
Change mask to properly mask 13 bits not 12
--HG--
extra : convert_revision : 08fe9bc32970e449cd045de479553a96a4e389d6
|
|
--HG--
extra : convert_revision : dfe23349b80ae3b34d3cb95c5734e01ef62f700e
|
|
Added function to skip determine_cpu_caches(). We may have to update this in the
future: see note below.
arch/alpha/alpha_memory.cc:
dev/ide_ctrl.cc:
dev/tsunamireg.h:
Added ULL for 64bit ints
kern/linux/linux_system.cc:
Added a function to skip determine_cpu_caches, right now it is only used for
printing in proc, however in the future we may either want to implement the SC_CTL
IPR register or manually set alpha_l1i_cacheshape, alpha_l1d_cacheshape,
alpha_l2_cacheshape, alpha_l3_cacheshape to ((size << 10) | (linesize>>1)<<4 | way)
kern/linux/linux_system.hh:
added event to skip determine_cpu_caches()
--HG--
extra : convert_revision : 1065f2091bbe6832b730af490f5b4672c2afedce
|
|
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
|
|
into zower.eecs.umich.edu:/.automount/zizzer/z/alschult/DiskModel/linux
--HG--
extra : convert_revision : 8eca0fba9d96bffea7a24bce9b14f0284bd58c83
|
|
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
|
|
dev/ns_gige.cc:
add some comments
--HG--
extra : convert_revision : 96ae82f1f48b8e2e2ba8a6a0e2f37d8f992d15b3
|
|
base/range.hh:
andrew thought this might be a bug.
dev/etherpkt.cc:
don't need std:: since there is a using directive
dev/ns_gige.cc:
update to new PIO and PCI system
dev/ns_gige.hh:
update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
Add some new #defines that I ended up needing
dev/pcidev.cc:
some changes to the debugging printfs of pci device
--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
|
|
Python script description.
arch/alpha/alpha_memory.cc:
dev/io_device.cc:
Add DEFINE_SIM_OBJECT_CLASS_NAME for intermediate SimObjects.
test/paramtest.cc:
Fix stupid spelling.
--HG--
extra : convert_revision : dc020208cb6507c1afb1ed771a7218daba678e09
|
|
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
|
|
--HG--
extra : convert_revision : 69440981a018ce8b7c1c8a73404da0a39faa3ac3
|
|
--HG--
extra : convert_revision : e07dc6c87b0b692d428b541d4032fcf82996ef15
|