| Age | Commit message (Collapse) | Author |
|---|
|
configs/test/fs.py:
update fs.py to use a bus bridge
cpu/simple/cpu.hh:
cpu should just return that it doesn't snoop any address ranges
python/m5/objects/System.py:
move boot_osflags to system
--HG--
extra : convert_revision : b4256df7eada7e65b69513361de8bffc3fdd680b
|
|
or bridges without panicing
SConscript:
add new cc files to scons
mem/bus.cc:
mem/bus.hh:
implement addressRanges() on the bus.
propigate address ranges to anyone who is interested stripping out ranges of who your propigating to (to avoid livelock)
mem/packet.hh:
add intersect function that returns true if two packets touch at least one byte of the same data (for functional access)
add fixPacket() that will eventually take the correct action giving a timing and functional packet, right now it panics
mem/physical.cc:
Don't panic if the physical memory recieves a status change, just ignore.
--HG--
extra : convert_revision : d470d51f2fb1db2700ad271e09792315ef33ba01
|
|
timing packets working and get sinic working
after merge from head. Checkpointing may need some work now. Endian-happiness still not complete.
SConscript:
add all devices back into make file
base/inet.hh:
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherdump.cc:
dev/etherdump.hh:
dev/etherint.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/etherpkt.cc:
dev/etherpkt.hh:
dev/ethertap.cc:
dev/ethertap.hh:
dev/pktfifo.cc:
dev/pktfifo.hh:
rename PacketPtr EthPacketPtr so it doesn't conflict with the PacketPtr type in the memory system
configs/test/fs.py:
add nics to fs.py
cpu/cpu_exec_context.cc:
remove this check, as it's not valid. We may want to add something else back in to make sure that no one can delete the
static virtual ports in the exec context
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
dev/alpha_console.cc:
dev/ide_ctrl.cc:
use new methods for accessing packet data
dev/ide_disk.cc:
add some more dprintfs
dev/io_device.cc:
delete packets when we are done with them. Update for new packet methods to access data
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart8250.cc:
dev/uart8250.hh:
mem/physical.cc:
mem/port.cc:
dUpdate for new packet methods to access data
dev/ns_gige.cc:
Update for new memory system
dev/ns_gige.hh:
python/m5/objects/Ethernet.py:
update for new memory system
dev/sinic.cc:
dev/sinic.hh:
Update for new memory system. Untested as need to merge in head because of kernel driver differences between versions
mem/packet.hh:
Add methods to access data instead of accessing it directly.
--HG--
extra : convert_revision : 223f43876afd404e68337270cd9a5e44d0bf553e
|
|
SConscript:
compile ide devices
base/chunk_generator.hh:
add another parameter to the chuck generator called complete() which
returns the number of bytes transfered so far. Very useful for
adding to a pointer.
configs/test/fs.py:
Add ide disk to fs test configuration
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/io_device.cc:
dev/io_device.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
update for new memory system
mem/bus.cc:
support devices that return multiple ranges
remove old ranges before using new info
mem/packet.hh:
make senderstate void* per steve's request that we use every
construct possible in C++
mem/physical.cc:
have memory stamp the packet with the time.
mem/physical.hh:
actually set the memory latency variable
python/m5/objects/Device.py:
Add DmaDevice
python/m5/objects/Ide.py:
Ide disk no longer has a physmem pointer
python/m5/objects/Pci.py:
update pci device for newmem
python/m5/objects/PhysicalMemory.py:
add latency parameter for physical memory
sim/byteswap.hh:
use fast architecture dependent byteswap calls if they exist
--HG--
extra : convert_revision : e3cf2e8f61064ad302d94bc22010a00c59f3f793
|
|
SConscript:
easier to fix than temporarily remove
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
mem needed for both fullsys and syscall
dev/baddev.cc:
fix for new mem system
dev/io_device.cc:
fix typo
dev/io_device.hh:
PioDevice needs to be a memobject
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
fix for new mem systems
dev/platform.cc:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
rather than the platform have a pointer to pciconfig, go the other
way so all devices are the same and can have a platform pointer
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart8250.cc:
python/m5/objects/AlphaConsole.py:
python/m5/objects/BadDevice.py:
python/m5/objects/BaseCPU.py:
python/m5/objects/Device.py:
python/m5/objects/Pci.py:
python/m5/objects/PhysicalMemory.py:
python/m5/objects/System.py:
python/m5/objects/Tsunami.py:
python/m5/objects/Uart.py:
fixes for newmem
--HG--
extra : convert_revision : b7b67e19095cca64889f6307725aa2f3d84c7105
|
|
ALPHA_FS finally compiles again
SConscript:
Use a couple more FS sources, still don't compile that much
arch/alpha/faults.hh:
the unimp fault should probably exist in nonfs too.
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/simconsole.cc:
dev/simple_disk.cc:
dev/simple_disk.hh:
dev/uart.cc:
dev/uart.hh:
dev/uart8250.cc:
dev/uart8250.hh:
sim/process.cc:
sim/system.cc:
fixes for newmem
dev/io_device.hh:
a system pointer is probably useful for every device to have
mem/bus.hh:
mem/physical.cc:
new address ranges function
python/m5/objects/SimpleDisk.py:
simple disk now has a system pointer rather than physmem directly
--HG--
extra : convert_revision : d8c0a5c6510a6210aec5e8adfb0a4a06ec0dcebf
|
|
change getPort parameter from char* to string
Add an extra phase between construction and init called connect
SConscript:
Add the bus and connector objects to scons
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
the connection to memory shouldn't be made until we know the memory
object exists (e.g. after construction)
dev/io_device.hh:
change to const string
mem/bus.hh:
change getPort parameter from char* to string
initialize num_interfaces
mem/mem_object.hh:
change getPort parameter from char* to string
mem/physical.cc:
mem/physical.hh:
change getPort parameter from char* to string
get rid of the bus object I created last time
python/m5/objects/PhysicalMemory.py:
get rid of the bus object I created last time
sim/main.cc:
sim/sim_object.cc:
sim/sim_object.hh:
Add an extra phase between construction and init called connect
--HG--
extra : convert_revision : 0e994f93374fa72a06d291655c440ff1b8e155a9
|
|
requestTime -> time
responseTime -> packet.time
Make CPU and memory able to connect to the bus
dev/io_device.cc:
update for request and packet both having a time
hand platform off to port for eventual selection of request modes
dev/io_device.hh:
update for request and packet both havig a time
hand platform off to port for eventual selection of request modes
mem/bus.hh:
Add a device map struct that maps a range to a portId
- Which needs work it theory it should be an interval tree
- but it is a list and works fine right now
Add a function called findPort which returns port for an addr range
Add a deviceBlockSize function that really shouldn't exist, but it
was easier than fixing the translating port
mem/packet.hh:
add a time to each packet
mem/physical.cc:
mem/physical.hh:
python/m5/objects/PhysicalMemory.py:
Make physical memory take a MemObject parameter of what to connect to
mem/request.hh:
remove requestTime/responseTime for just time in request which
is requset time and the time in the packet which is responsetime
python/m5/objects/BaseCPU.py:
Instead of memory cpu connects to any memory object
python/m5/objects/Bus.py:
Fix for new bus object
--HG--
extra : convert_revision : 72605e8a3fcdd9e80a41f439909ee7feb3f1fe1d
|
|
is changed
Add a default machine width parameter
Arch based live processes
arch/alpha/linux/process.cc:
arch/alpha/linux/process.hh:
arch/alpha/process.cc:
arch/alpha/process.hh:
arch/alpha/tru64/process.cc:
arch/alpha/tru64/process.hh:
arch/mips/linux_process.cc:
arch/mips/process.cc:
arch/mips/process.hh:
arch/sparc/linux/process.cc:
arch/sparc/linux/process.hh:
arch/sparc/process.cc:
arch/sparc/process.hh:
configs/test/test.py:
python/m5/objects/Process.py:
sim/process.cc:
sim/process.hh:
Architecture based live processes
arch/mips/isa_traits.hh:
arch/sparc/isa_traits.hh:
Add a default machine width parameter
mem/port.hh:
gcc 4 really wants a virtual destructor
sim/byteswap.hh:
remove the comment around long and unsigned long even though uint32_t
and int32_t are defined. Seems to work with gcc 4 and 3.4.3.
sim/syscall_emul.cc:
sim/syscall_emul.hh:
add translations for new sections that are mmapped or when the brk
is changed
--HG--
extra : convert_revision : e2f9f228113c7127c87ef2358209a399c30ed5c6
|
|
on execution.
configs/test/test.py:
Move test binary out of m5-test, don't depend on
m5-test/Benchmarks.
python/m5/objects/System.py:
Split out full-system-only parameters (lost in merge).
sim/system.cc:
Need to be able to instantiate System directly in SE mode
(lost in merge).
sim/system.hh:
A few more functions here are FS-only.
configs/test/hello:
Add in binary.
--HG--
rename : configs/test.py => configs/test/test.py
extra : convert_revision : 4051b18772e0a0dcb97eb591d4373683be9f4395
|
|
--HG--
rename : arch/alpha/isa_desc => arch/alpha/isa/main.isa
rename : arch/alpha/alpha_linux_process.cc => arch/alpha/linux/process.cc
rename : arch/alpha/alpha_linux_process.hh => arch/alpha/linux/process.hh
rename : arch/alpha/alpha_tru64_process.cc => arch/alpha/tru64/process.cc
rename : arch/alpha/alpha_tru64_process.hh => arch/alpha/tru64/process.hh
rename : cpu/exec_context.cc => cpu/cpu_exec_context.cc
rename : cpu/exec_context.hh => cpu/cpu_exec_context.hh
extra : convert_revision : 7d1efcedd708815d985a951f6f010fbd83dc27e8
|
|
System -> AlphaSystem
SConscript:
Move some more files around
arch/alpha/freebsd/system.cc:
arch/alpha/freebsd/system.hh:
System -> AlphaSystem
arch/alpha/linux/aligned.hh:
arch/alpha/linux/hwrpb.hh:
arch/alpha/linux/system.cc:
arch/alpha/linux/thread_info.hh:
arch/alpha/linux/threadinfo.hh:
move alpha specific code into arch/alpha
python/m5/objects/System.py:
Split off arch specific parts of system into AlphaSystem
--HG--
rename : kern/freebsd/freebsd_system.cc => arch/alpha/freebsd/system.cc
rename : kern/freebsd/freebsd_system.hh => arch/alpha/freebsd/system.hh
rename : kern/linux/aligned.hh => arch/alpha/linux/aligned.hh
rename : kern/linux/hwrpb.hh => arch/alpha/linux/hwrpb.hh
rename : kern/linux/linux_system.cc => arch/alpha/linux/system.cc
rename : kern/linux/linux_system.hh => arch/alpha/linux/system.hh
rename : kern/linux/thread_info.hh => arch/alpha/linux/thread_info.hh
rename : kern/linux/linux_threadinfo.hh => arch/alpha/linux/threadinfo.hh
rename : kern/tru64/tru64_system.cc => arch/alpha/tru64/system.cc
rename : kern/tru64/tru64_system.hh => arch/alpha/tru64/system.hh
extra : convert_revision : 1c496efb823326a4b629574bd9b5f30e99a0aa40
|
|
use Receive side scaling
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
dev/sinic.cc:
dev/sinic.hh:
dev/sinicreg.hh:
add support for setting the RSS flag to notify the driver
to use RSS
--HG--
extra : convert_revision : 5f0c11668ae976634b3bf0caad669a9464a4c041
|
|
See configs/test.py for test config (using simple
binary in my home directory on zizzer).
base/chunk_generator.hh:
Fix assertion for chunkSize == 0 (not a power of 2)
base/intmath.hh:
Fix roundDown to take integer alignments.
cpu/base.cc:
Register exec contexts regardless of state (not sure why
this check was in here in the first place).
mem/physical.cc:
Add breaks to switch.
python/m5/objects/BaseCPU.py:
Default mem to Parent.any (e.g. get from System).
python/m5/objects/Ethernet.py:
python/m5/objects/Root.py:
HierParams is gone.
python/m5/objects/PhysicalMemory.py:
mmu param is full-system only.
sim/process.cc:
Stack mapping request must be page-aligned and page-sized.
Don't delete objFile object in create since we are counting
on it being around for startup().
--HG--
extra : convert_revision : 90c43ee927e7d82a045d6e10302d965797d006f7
|
|
SConscript:
Add Back memory to be built
mem/physical.hh:
Fix function declerations
python/m5/objects/BaseCPU.py:
Remove IL1 and DL1 params from the cpu object
--HG--
extra : convert_revision : 2f285dc626bc8d84d095def68e986fe7e6f3d8e9
|
|
Ready to start testing if I could fix the linking errors I can't ever seem to fix.
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
Add connecting of ports until builder can handle it.
mem/physical.cc:
Add function to allocate a port in the object
Remove some full_sys stuff untill needed
mem/physical.hh:
Add function to allocate a port in the object
python/m5/objects/BaseCPU.py:
Update the params
sim/process.cc:
Make sure to use the right name (hopefully CPU constructor already called)
--HG--
extra : convert_revision : 4089caf20d7eb53e5463c8ac93ddce5e43ea5d85
|
|
Clean out old memory python files, move them into old_mem directory. Maybe we should just delete them, they are under revision control.
Add new py files for new objects.
SConscript:
Update because memory is just a header file now
base/chunk_generator.hh:
Make Chunk Generator return the entire size if the chunk_size is set to zero. Useful when trying to chunck on blocksize of memory, which can write large pieces of data.
cpu/simple/cpu.cc:
Make sure to delete the pkt.
mem/physical.cc:
mem/physical.hh:
Set up response event.
mem/port.cc:
Rename rqst to req to conform to same standard naming convention.
python/m5/objects/PhysicalMemory.py:
Update the params, inheritence
--HG--
extra : convert_revision : 857154ec256522baf423b715833930497999549b
|
|
until the cache access occurs. The fundamental problem
is that a subsequent read that occurs functionally will
get a functionally incorrect result that can break
driver code.
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/sinic.cc:
dev/sinic.hh:
get rid of pio_delay write and the associated code to move
the write to the cache access function
dev/sinicreg.hh:
no more write delays
python/m5/objects/Ethernet.py:
get rid of pio_delay write
--HG--
extra : convert_revision : 1dcb51b8f4514e717bc334a782dfdf06d29ae69d
|
|
System object now exists for both fullsys and syscall emulation, as the
latter needs it so that Process objects can find the shared PhysicalMemory
for initialization.
Changes are incomplete: still need to fix up Process (& EioProcess) memory
initialization and syscall emulation code for new mem interface.
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_linux_process.hh:
arch/alpha/alpha_tru64_process.cc:
arch/alpha/alpha_tru64_process.hh:
cpu/base.cc:
cpu/base.hh:
Take System argument in constructor.
cpu/exec_context.cc:
Take System argument in constructor.
Merge two constructors into a single one.
cpu/exec_context.hh:
Take System argument in constructor.
Merge two constructors into a single one.
Replace dummy translation with lookup in Process object's page table.
python/m5/objects/Process.py:
Add System parameter to Process object (& subobjects).
python/m5/objects/System.py:
Segregate full-system only Process parameters (most of them!).
sim/process.cc:
Take System argument in constructor.
Move initialization to startup() callback to occur after system & cpus
are initialized.
Generate ProxyMemory object to pass to loader for transparent
virtual page allocation.
sim/process.hh:
Take System argument in constructor.
Move initialization to startup() callback to occur after system & cpus
are initialized.
sim/system.cc:
sim/system.hh:
Enable System object for non-full-system too.
Basically involved putting most of the existing code
inside '#ifdef FULL_SYSTEM'.
Key thing needed for syscall emulation at this point is
the PhysicalMemory object (for Process initialization).
--HG--
extra : convert_revision : f0f34b47bd4f77b502191affd3d03b4d6d9bcdd8
|
|
separate the rx thread and tx thread and get rid of the dedicated flag.
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
python/m5/objects/Ethernet.py:
dedicated flag goes away, we have new individual flags for
rx thread and tx thread
dev/sinic.cc:
Virtualize sinic
- The io registers are replicated many times in memory, allowing the NIC to
differentiate among several virtual interfaces.
- On the TX side, this allows multiple CPUs to initiate transmits at the same
time without locking in the software. If a partial packet is transmitted,
then the state machine blocks waiting for that virtual interface to complete
its packet. Then the state machine will move on to the next virtual
interface. The commands are kept in fifo order.
- On the RX side, multiple partial transmits can be simultaneously done.
Though a packet does not deallocate its fifo space until all preceeding
packets in the fifo are deallocated. To enable multiple receives, it
is necessary for each virtual nic to keep its own information about its
progress through the state machine.
dev/sinic.hh:
Virtualize sinic
Receive state must be virtualized since we allow the receipt of packets in
parallel.
dev/sinicreg.hh:
Virtualize sinic
separate rx thread and tx thread
create a soft interrupt and add a command to trigger it.
pad out the reserved bits in the RxDone and TxDone regs
--HG--
extra : convert_revision : c10bb23a46a89ffd1e08866c1f1621cb98069205
|
|
dev/ns_gige.cc:
add support for delaying pio writes until the cache access occurs
the only write we delay are for CR_TXE and CR_RXE
dev/sinic.cc:
dev/sinic.hh:
the txPioRequest and rxPioRequest things were more or less bogus
add support for delaying pio writes until the cache access occurs
dev/sinicreg.hh:
Add delay_read and delay_write to the register information struct
for now, we won't delay any reads, and we'll delay the writes that
initiate DMAs
python/m5/objects/Ethernet.py:
add a parameter to delay pio writes until the timing access
actually occurs.
--HG--
extra : convert_revision : 79b18ea2812c2935d7d5ea6eff1f55265114d05d
|
|
python/m5/config.py:
Add MemorySize32 (a 32-bit value specified in bytes)
--HG--
extra : convert_revision : bfeee501f7ff1aa2567a3682da129a5770cb7bd2
|
|
can specify either independently.
python/m5/objects/Device.py:
io_bus is split out into pio_bus and dma_bus so that any device
can specify either independently.
dma_bus defaults to point to whatever pio_bus uses.
--HG--
extra : convert_revision : d35d5374d0bf592f6b5df465c05203577b8b8763
|
|
into zeep.eecs.umich.edu:/z/saidi/work/m5
--HG--
extra : convert_revision : 3cc23080d19cc464a8ba7c1c93b6e5d45af7d463
|
|
python/m5/objects/Ethernet.py:
Add Latency Variability Parameter
--HG--
extra : convert_revision : db5431cccffea8c7247d0f72e4770d4d58bd25aa
|
|
interrupts.
dev/sinic.cc:
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
Includes RxDone, RxWait, TxDone, and TxWait
- Use the new register information accessor functions to grab
validity and size information for the read and write functions
- read all registers directly from the register space by offset
and size, not by actual name (less code)
- The side effect of reading the interrupt status (clearing it) now
happens outside the actual chunk of code where the value is loaded.
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- When RxData or TxData are written, their busy flag is set to
indicate that they have an outstanding transaction.
- The RxHigh and TxLow interrupts are special, they only interrupt
if the rxEmpty or txFull limits were hit
- Move reset to the command register
- Update more registers on reset, clear rxEmpty and txFull
- Data dumps only happen if EthernetData trace flag set
- When a DMA completes, kick the other engine if it was waiting
- implement all of the new interrupts
- serialize the new stuff
dev/sinic.hh:
- Put all registers with their proper size and alignment into
the regs struct so that we can copy multiple at a time.
- Provide accessor functions for accessing the registers with
different sizes.
- Flags to track when the rx fifo hit empty and the tx fifo became
full. These flags are used to determine what to do when below
the watermarks, and are reset when crossing the watermark.
- the txDmaEvent should actually trigger the txDmaDone function
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
- add rx_max_intr and dedicated (for dedicated thread) config params
dev/sinicreg.hh:
Add some new registers: Command, RxMaxIntr, RxFifoSize, TxFifoSize,
rename XxThreshold to XxFifoMark
Move Reset to the Command register
Add Thread to the Config register
New interrupts, better names
More info in RxDone and TxDone
Easier access to information on each register (size, read, write, name)
python/m5/objects/Ethernet.py:
Both sinic and nsgige have the dedicated thread
Add a parameter to configure the maximum number for receive
packets per interrupt
--HG--
extra : convert_revision : 407c5a993b6fb17326b4c623ee5d4b25fd69ac80
|
|
Create EtherDevBase which both Sinic and NSGigE derive from
bump fifos
drop rx max copy size to 1514 bytes to be friendlier with linux
default interrupt delay is 10us
dev/ns_gige.cc:
Shuffle around parameters to make it easier to find stuff
dev/sinic.cc:
Shuffle around parameters to make it easier to find stuff
rename cycleTime -> clock
dev/sinic.hh:
rename cycleTime -> clock
--HG--
extra : convert_revision : a673bee875e50d083098991aea20972fa8d5b5c7
|
|
dev/ns_gige.cc:
stop exposing the m5reg to the configuration stuff and build it
based on exposed flags. Expose dedicated now.
dev/ns_gige.hh:
goodbye m5reg hello dedicated
dev/ns_gige_reg.h:
Flags for the M5REG
--HG--
extra : convert_revision : 11134fe67cdf5291caacf9b3041739c437b983e3
|
|
python/m5/objects/Root.py:
Add execution trace object.
--HG--
extra : convert_revision : 1d1ba18779fd4d0b5af921c5f34b7a2bfb4b75d9
|
|
stay fixed even if the path to the binary changes, so the simulation results
are independent of that path.
--HG--
extra : convert_revision : d1109cd284466c14eddc97289908a51e771fc5db
|
|
dev/etherdump.cc:
no default parameters anymore they should be in python
python/m5/objects/Ethernet.py:
move the maxlen parameter for EtherDump into python
--HG--
extra : convert_revision : a796353a68907dfeb22059cd3ad536e6e8f60998
|
|
from Latency to Tick, and rename max_time to max_tick.
python/m5/objects/Root.py:
sim/root.cc:
Convert type of max_time and progress_interval
from Latency to Tick, and rename max_time to max_tick.
--HG--
extra : convert_revision : 2f2aacf6321c3003a0ce834acd8fb726abf27ce3
|
|
SConscript:
Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc.
arch/alpha/isa_traits.hh:
Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks().
cpu/exec_context.hh:
cpu/o3/alpha_cpu.hh:
Replaced htoa()s with gtoh() and htog().
cpu/o3/fetch_impl.hh:
cpu/simple/cpu.cc:
Replaced htoa() with gtoh().
dev/disk_image.cc:
Replaced htoa()s with letoh()s.
dev/ide_ctrl.cc:
Got rid of magic numbers.
Added IdeChannel and IdeRegType type names where necessary.
dev/ide_ctrl.hh:
Got rid of unnecessary macros.
Changed RegType_t to IdeRegType.
Changed bmi_regs to allow accessing registers by name instead of just by array index.
Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel.
dev/ide_disk.cc:
Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array.
dev/ide_disk.hh:
Updated command register struct.
dev/ns_gige.cc:
dev/ns_gige.hh:
Made ReadConfig and WriteConfig begin with a lower-case letter.
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pciconfigall.cc:
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pcidev.cc:
Cleaned up readConfig() and writeConfig() functions.
dev/pcidev.hh:
Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data.
dev/pcireg.h:
Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used.
dev/rtcreg.h:
Added macros for bit fields in RTC status registers A & B.
dev/sinic.cc:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
The accessing of elements of PCIConfig structure is updated.
dev/sinic.hh:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
dev/tsunami_io.cc:
Added implementation of new RTC and PIT classes.
dev/tsunami_io.hh:
Added classes for RTC and PIT modules.
dev/tsunamireg.h:
Added macros for DMA ports used by Tsunami-Tru64.
dev/uart8250.cc:
Got rid of a magic number.
Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register.
dev/uart8250.hh:
Added comments and macros dealing with the UART Interrupt ID register.
kern/linux/linux_system.cc:
Replaced htoa() with htog().
python/m5/objects/Pci.py:
PciFake is a python class for Pci Devices that do nothing.
python/m5/objects/Tsunami.py:
TsunamiFake was renamed as IsaFake.
sim/system.cc:
Replaced htoa()s with htog()s.
dev/isa_fake.cc:
New BitKeeper file ``dev/isa_fake.cc''
TsunamiFake was renamed as IsaFake.
dev/isa_fake.hh:
New BitKeeper file ``dev/isa_fake.hh''
TsunmaiFake was renamed as IsaFake.
dev/pitreg.h:
New BitKeeper file ``dev/pitreg.h''
Useful macros for working with PIT (Periodic Interval Timer) registers.
--HG--
extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
|
|
Make the AlphaConsole calculate the number of CPUs instead
of passing that in as a parameter.
cpu/base.cc:
pass the desired cpu_id into registerExecContext, offsetting it
by the thread number. a cpu_id of -1 means that it should be
generated for you.
cpu/base.hh:
Take the cpu_id as a parameter
cpu/o3/alpha_cpu_builder.cc:
cpu/simple/cpu.cc:
Accept the cpu_id as a parameter
while we're here, let's remove the multiplier since it is
not used.
dev/alpha_console.cc:
don't take the number of CPUs as a parameter. Calculate it from
the system based on the number of CPUs that have been registered.
move init() code to startup() to ensure that all CPUs are registerd.
dev/alpha_console.hh:
python/m5/objects/AlphaConsole.py:
don't take the number of CPUs as a parameter.
move init() code to startup() to ensure that all CPUs are registerd.
python/m5/objects/BaseCPU.py:
take the cpu_id as a parameter. Default it to -1 which means
that it will be generated.
sim/system.cc:
allow the registerExecContext functioin to take a desired
cpu_id as a parameter. Check to ensure that the id isn't
already used. Accept -1 as a request to have an id assigned.
sim/system.hh:
keep track of the number of registered exec contexts.
provide a function for accessing the number of exec contexts
that checks to ensure that they are all registered correctly.
--HG--
extra : convert_revision : 8e12f96ff8a49fa16cdbbdb4c05c651376c35788
|
|
the nsgige state machine can run. The frequency is of the actual
state transitions, and not the rate of what underlying
instructions might run at.
dev/ns_gige.cc:
Implement a state machine clock that acutally limits how fast
the state machine can run. After each state transition, a
variable is kept to hold the next state transition until the
next clock. The frequency is of the actual state transitions,
and not the rate of what underlying instructions might run at.
dev/ns_gige.hh:
Add back the rxKickEvent and txKickEvent events.
python/m5/objects/Ethernet.py:
Default the state machine clock to '0ns' so the default
behaviour doesn't change when we actually implement the
state machine clock.
--HG--
extra : convert_revision : 2db1943dee4e91ea75aaee6a91e88f27f01a09dd
|
|
object and get rid of the ParamContext that each used to have.
python/m5/objects/Root.py:
Add max_time and progress_interval to the Root object
sim/root.cc:
Add max_time and progress_interval to the Root object. These
parameters used to be in their own contexts in sim_events.cc
sim/sim_events.cc:
Get rid of the ParamContext for max cycles and the progress
event. Move the functionality to the Root object
sim/sim_events.hh:
Move ProgressEvent declaration to the header so that it can
be used in other files.
--HG--
extra : convert_revision : ff664b806855e8eb9201b8a25392aa53204464f0
|
|
--HG--
extra : convert_revision : 74e03fe9447d9d2be59e675b034dc6df0afcde51
|
|
is defined.
build/SConstruct:
Default ALPHA_TLASER to false
dev/uart8250.cc:
fix paths
--HG--
extra : convert_revision : 3616b5b4b9060860a73568a4ed4f1e8eb991938f
|
|
fix some doxygen comments
SConscript:
Added split uart files
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
dev/tsunami.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/tsunamireg.h:
fix doxgyen file comment
dev/uart.cc:
dev/uart.hh:
python/m5/objects/Uart.py:
split uart into urt8250 and uart8530
--HG--
extra : convert_revision : 2e70aad892a37620d7909017648bca6d7d69d678
|
|
Make System an object that can be instantiated. For operating
systems that don't need any OS specific hacks.
python/m5/objects/AlphaConsole.py:
python/m5/objects/BaseCPU.py:
python/m5/objects/Tsunami.py:
BaseSystem -> System
--HG--
rename : python/m5/objects/BaseSystem.py => python/m5/objects/System.py
extra : convert_revision : e5d12db02abef1b0eda720b50dd2c09cb1ac5232
|
|
python/m5/config.py:
Make NetworkBandwidth and MemoryBandwidth work
python/m5/objects/Ethernet.py:
Make 1Gbps default for ethernet
--HG--
extra : convert_revision : 59e62f7e62624356ae8d7304598617f60667f040
|
|
Fix description for Bus clock_ratio (no longer a ratio).
Add Clock param type (generic Frequency or Latency).
cpu/base_cpu.cc:
cpu/base_cpu.hh:
cpu/beta_cpu/alpha_full_cpu_builder.cc:
cpu/simple_cpu/simple_cpu.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/pciconfigall.cc:
dev/sinic.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
python/m5/objects/BaseCPU.py:
python/m5/objects/BaseCache.py:
python/m5/objects/BaseSystem.py:
python/m5/objects/Bus.py:
python/m5/objects/Ethernet.py:
python/m5/objects/Root.py:
sim/universe.cc:
Standardize clock parameter names to 'clock'.
Fix description for Bus clock_ratio (no longer a ratio).
python/m5/config.py:
Minor tweaks on Frequency/Latency:
- added new Clock param type to avoid ambiguities
- factored out init code into getLatency()
- made RootFrequency *not* a subclass of Frequency so it
can't be directly assigned to a Frequency paremeter
--HG--
extra : convert_revision : fc4bb8562df171b454bbf696314cda57e1ec8506
|
|
Special mpy importer is gone; everything is just plain
Python now (funky, but straight-up).
May not completely work yet... generates identical ini
files for many configs/kernel settings, but I have yet
to run it against regressions. This commit is for my
own convenience and won't be pushed until more testing
is done.
python/m5/__init__.py:
Get rid of mpy_importer and param_types.
python/m5/config.py:
Major cleanup. We now have separate classes and
instances for SimObjects. Proxy handling and param
conversion significantly reorganized. No explicit
instantiation step anymore; we can dump an ini file
straight from the original tree.
Still needs more/better/truer comments.
test/genini.py:
Replace LoadMpyFile() with built-in execfile().
Export __main__.m5_build_env.
python/m5/objects/AlphaConsole.py:
python/m5/objects/AlphaFullCPU.py:
python/m5/objects/AlphaTLB.py:
python/m5/objects/BadDevice.py:
python/m5/objects/BaseCPU.py:
python/m5/objects/BaseCache.py:
python/m5/objects/BaseSystem.py:
python/m5/objects/Bus.py:
python/m5/objects/CoherenceProtocol.py:
python/m5/objects/Device.py:
python/m5/objects/DiskImage.py:
python/m5/objects/Ethernet.py:
python/m5/objects/Ide.py:
python/m5/objects/IntrControl.py:
python/m5/objects/MemTest.py:
python/m5/objects/Pci.py:
python/m5/objects/PhysicalMemory.py:
python/m5/objects/Platform.py:
python/m5/objects/Process.py:
python/m5/objects/Repl.py:
python/m5/objects/Root.py:
python/m5/objects/SimConsole.py:
python/m5/objects/SimpleDisk.py:
python/m5/objects/Tsunami.py:
python/m5/objects/Uart.py:
Fixes for eliminating mpy_importer, and modified
handling of frequency/latency params.
Also renamed parent to Parent.
--HG--
rename : python/m5/objects/AlphaConsole.mpy => python/m5/objects/AlphaConsole.py
rename : python/m5/objects/AlphaFullCPU.mpy => python/m5/objects/AlphaFullCPU.py
rename : python/m5/objects/AlphaTLB.mpy => python/m5/objects/AlphaTLB.py
rename : python/m5/objects/BadDevice.mpy => python/m5/objects/BadDevice.py
rename : python/m5/objects/BaseCPU.mpy => python/m5/objects/BaseCPU.py
rename : python/m5/objects/BaseCache.mpy => python/m5/objects/BaseCache.py
rename : python/m5/objects/BaseSystem.mpy => python/m5/objects/BaseSystem.py
rename : python/m5/objects/Bus.mpy => python/m5/objects/Bus.py
rename : python/m5/objects/CoherenceProtocol.mpy => python/m5/objects/CoherenceProtocol.py
rename : python/m5/objects/Device.mpy => python/m5/objects/Device.py
rename : python/m5/objects/DiskImage.mpy => python/m5/objects/DiskImage.py
rename : python/m5/objects/Ethernet.mpy => python/m5/objects/Ethernet.py
rename : python/m5/objects/Ide.mpy => python/m5/objects/Ide.py
rename : python/m5/objects/IntrControl.mpy => python/m5/objects/IntrControl.py
rename : python/m5/objects/MemTest.mpy => python/m5/objects/MemTest.py
rename : python/m5/objects/Pci.mpy => python/m5/objects/Pci.py
rename : python/m5/objects/PhysicalMemory.mpy => python/m5/objects/PhysicalMemory.py
rename : python/m5/objects/Platform.mpy => python/m5/objects/Platform.py
rename : python/m5/objects/Process.mpy => python/m5/objects/Process.py
rename : python/m5/objects/Repl.mpy => python/m5/objects/Repl.py
rename : python/m5/objects/Root.mpy => python/m5/objects/Root.py
rename : python/m5/objects/SimConsole.mpy => python/m5/objects/SimConsole.py
rename : python/m5/objects/SimpleDisk.mpy => python/m5/objects/SimpleDisk.py
rename : python/m5/objects/Tsunami.mpy => python/m5/objects/Tsunami.py
rename : python/m5/objects/Uart.mpy => python/m5/objects/Uart.py
extra : convert_revision : 9dc55103a6f5b40eada4ed181a71a96fae6b0b76
|
|
--HG--
extra : convert_revision : c403960153ed648e7da7251465ca9350ba10cd27
|
|
python/m5/objects/BaseCache.mpy:
Add mem_trace parameter.
--HG--
extra : convert_revision : a0bab53fabd7426eee5ca9c845c02a6ac2e1722f
|
|
--HG--
extra : convert_revision : b868e7920eaa3682c6123651f0c598673ebb7f22
|
|
inclusion of a full-fledged load/store queue. At the moment it still has some issues running, but most of the code is hopefully close to the final version.
SConscript:
arch/isa_parser.py:
cpu/base_dyn_inst.cc:
Remove OOO CPU stuff.
arch/alpha/faults.hh:
Add fake memory fault. This will be removed eventually.
arch/alpha/isa_desc:
Change EA comp and Mem accessor to be const StaticInstPtrs.
cpu/base_dyn_inst.hh:
Update read/write calls to use load queue and store queue indices.
cpu/beta_cpu/alpha_dyn_inst.hh:
Change to const StaticInst in the register accessors.
cpu/beta_cpu/alpha_dyn_inst_impl.hh:
Update syscall code with thread numbers.
cpu/beta_cpu/alpha_full_cpu.hh:
Alter some of the full system code so it will compile without errors.
cpu/beta_cpu/alpha_full_cpu_builder.cc:
Created a DerivAlphaFullCPU class so I can instantiate different CPUs that have different template parameters.
cpu/beta_cpu/alpha_full_cpu_impl.hh:
Update some of the full system code so it compiles.
cpu/beta_cpu/alpha_params.hh:
cpu/beta_cpu/fetch_impl.hh:
Remove asid.
cpu/beta_cpu/comm.hh:
Remove global history field.
cpu/beta_cpu/commit.hh:
Comment out rename map.
cpu/beta_cpu/commit_impl.hh:
Update some of the full system code so it compiles. Also change it so that it handles memory instructions properly.
cpu/beta_cpu/cpu_policy.hh:
Removed IQ from the IEW template parameter to make it more uniform.
cpu/beta_cpu/decode.hh:
Add debug function.
cpu/beta_cpu/decode_impl.hh:
Slight updates for decode in the case where it causes a squash.
cpu/beta_cpu/fetch.hh:
cpu/beta_cpu/rob.hh:
Comment out unneccessary code.
cpu/beta_cpu/full_cpu.cc:
Changed some of the full system code so it compiles. Updated exec contexts and so forth to hopefully make multithreading easier.
cpu/beta_cpu/full_cpu.hh:
Updated some of the full system code to make it compile.
cpu/beta_cpu/iew.cc:
Removed IQ from template parameter to IEW.
cpu/beta_cpu/iew.hh:
Removed IQ from template parameter to IEW. Updated IEW to recognize the Load/Store queue.
cpu/beta_cpu/iew_impl.hh:
New handling of memory instructions through the Load/Store queue.
cpu/beta_cpu/inst_queue.hh:
Updated comment.
cpu/beta_cpu/inst_queue_impl.hh:
Slightly different handling of memory instructions due to Load/Store queue.
cpu/beta_cpu/regfile.hh:
Updated full system code so it compiles.
cpu/beta_cpu/rob_impl.hh:
Moved some code around; no major functional changes.
cpu/ooo_cpu/ooo_cpu.hh:
Slight updates to OOO CPU; still does not work.
cpu/static_inst.hh:
Remove OOO CPU stuff. Change ea comp and mem acc to return const StaticInst.
kern/kernel_stats.hh:
Extra forward declares added due to compile error.
--HG--
extra : convert_revision : 594a7cdbe57f6c2bda7d08856fcd864604a6238e
|
|
dev/sinic.cc:
dev/sinic.hh:
Fix sinic parameters. (header_bus -> io_bus)
python/m5/objects/Ethernet.mpy:
Add simobj definitions for sinic.
--HG--
extra : convert_revision : 77d5b80bd1f1708329b263fb48965d7f555cc9d1
|
|
cache from the cpu-side interface
--HG--
extra : convert_revision : 0a3b3741924ed39c1c8710d0963e4c8f3e73f81a
|
|
can pass simulator specific options to the device driver.
dev/ns_gige.cc:
Add the m5 register and parameter to the ns83820 device model
so that we can pass simulator specific options to the device
driver.
dev/ns_gige.hh:
dev/ns_gige_reg.h:
Add the m5 register to the ns83820 device model
--HG--
extra : convert_revision : 84674887560fa3b607e725b8e5bc8272761fcf09
|
