summaryrefslogtreecommitdiff
path: root/src/SConscript
AgeCommit message (Collapse)Author
2016-03-13scons: fix building in non-standard locationsSteve Reinhardt
It's apparently not widely known that our scons scripts allow you to put the build directory wherever you want; not only does it not have to be immediately under the root of your repo, it doesn't even have to be underneath the root at all. (For example, sometimes it's useful to build on a local disk if your repo is on a slow NFS mount.) I point this out because this functionality has been broken for close to two years but no one seems to have noticed yet. This patch fixes an assumption that crept in in changeset be0e1724eb39 (May 09 2014) that the build dir would be immediately under the top level of the repo, preventing builds anywhere else.
2016-02-17scons: Enable building with the gcc/clang Address SanitizerAndreas Hansson
Allow the user to easily build gem5 with the Address Sanitizer, part of both gcc and clang these days.
2016-02-08scons: always generate sim/tags.ccCurtis Dunham
Due to insufficient build deps, the checkpoint tags might not get updated; this commit solves this. Due to the uncommon nature of the build target, regenerating tags.cc is a fairly clean solution. Since SCons hashes file contents, it won't recompile anything unless a new checkpoint upgrader is actually added. --HG-- extra : amend_source : ed3879da7668554693f697076deaf5029cc9b954
2016-01-19gpu-compute: AMD's baseline GPU modelTony Gutierrez
2016-01-11scons: Enable -Wextra by defaultAndreas Hansson
Make best use of the compiler, and enable -Wextra as well as -Wall. There are a few issues that had to be resolved, but they are all trivial.
2015-09-02sim: tag-based checkpoint versioningCurtis Dunham
This commit addresses gem5 checkpoints' linear versioning bottleneck. Since development is distributed across many private trees, there exists a sort of 'race' for checkpoint version numbers: internally a checkpoint version may be used but then resynchronizing with the external tree causes a conflict on that version. This change replaces the linear version number with a set of unique strings called tags. Now the only conflicts that can arise are of tag names, where collisions are much easier to avoid. The checkpoint upgrader (util/cpt_upgrader.py) upgrades the version representation, as one would expect. Each tag version implements its upgrader code in a python file in the util/cpt_upgraders directory rather than adding a function to the upgrader script itself. The version tags are stored in the 'Globals' section rather than 'root' (as the version was previously) because 'Globals' gets unserialized first and can provide a warning before any other unserialization errors can occur.
2015-07-03scons: Bump compiler requirement to gcc >= 4.7 and clang >= 3.1Andreas Hansson
This patch updates the compiler minimum requirement to gcc 4.7 and clang 3.1, thus allowing: 1. Explicit virtual overrides (no need for M5_ATTR_OVERRIDE) 2. Non-static data member initializers 3. Template aliases 4. Delegating constructors This patch also enables a transition from --std=c++0x to --std=c++11.
2015-02-11base: Add compiler macros to add deprecation warningsAndreas Sandberg
Gcc and clang both provide an attribute that can be used to flag a function as deprecated at compile time. This changeset adds a gem5 compiler macro for that compiler feature. The macro can be used to indicate that a legacy API within gem5 has been deprecated and provide a graceful migration to the new API.
2015-02-11base: Do not dereference NULL in CompoundFlag creationAndreas Hansson
This patch fixes the CompoundFlag constructor, ensuring that it does not dereference NULL. Doing so has undefined behaviuor, and both clang and gcc's undefined-behaviour sanitiser was rather unhappy.
2014-12-02scons: Ensure dictionary iteration is sorted by keyAndreas Hansson
This patch adds sorting based on the SimObject name or parameter name for all situations where we iterate over dictionaries. This should ensure a deterministic and consistent order across the host systems and hopefully avoid regression results differing across python versions.
2014-10-16arch,x86,mem: Dynamically determine the ISA for Ruby store checkAndreas Hansson
This patch makes the memory system ISA-agnostic by enabling the Ruby Sequencer to dynamically determine if it has to do a store check. To enable this check, the ISA is encoded as an enum, and the system is able to provide the ISA to the Sequencer at run time. --HG-- rename : src/arch/x86/insts/microldstop.hh => src/arch/x86/ldstflags.hh
2014-10-16config: Add the ability to read a config file using C++ and PythonAndreas Hansson
This patch adds the ability to load in config.ini files generated from gem5 into another instance of gem5 built without Python configuration support. The intended use case is for configuring gem5 when it is a library embedded in another simulation system. A parallel config file reader is also provided purely in Python to demonstrate the approach taken and to provided similar functionality for as-yet-unknown use models. The Python configuration file reader can read both .ini and .json files. C++ configuration file reading: A command line option has been added for scons to enable C++ configuration file reading: --with-cxx-config There is an example in util/cxx_config that shows C++ configuration in action. util/cxx_config/README explains how to build the example. Configuration is achieved by the object CxxConfigManager. It handles reading object descriptions from a CxxConfigFileBase object which wraps a config file reader. The wrapper class CxxIniFile is provided which wraps an IniFile for reading .ini files. Reading .json files from C++ would be possible with a similar wrapper and a JSON parser. After reading object descriptions, CxxConfigManager creates SimObjectParam-derived objects from the classes in the (generated with this patch) directory build/ARCH/cxx_config CxxConfigManager can then build SimObjects from those SimObjectParams (in an order dictated by the SimObject-value parameters on other objects) and bind ports of the produced SimObjects. A minimal set of instantiate-replacing member functions are provided by CxxConfigManager and few of the member functions of SimObject (such as drain) are extended onto CxxConfigManager. Python configuration file reading (configs/example/read_config.py): A Python version of the reader is also supplied with a similar interface to CxxConfigFileBase (In Python: ConfigFile) to config file readers. The Python config file reading will handle both .ini and .json files. The object construction strategy is slightly different in Python from the C++ reader as you need to avoid objects prematurely becoming the children of other objects when setting parameters. Port binding also needs to be strictly in the same port-index order as the original instantiation.
2014-10-16scons: Add Undefined Behavior Sanitizer (UBSan) optionAndreas Hansson
This patch adds the Undefined Behavior Sanitizer (UBSan) for clang and gcc >= 4.9. Due to the performance impact, the usage is guarded by a command-line option.
2014-08-12scons: Generate a single debug flag C++ fileCurtis Dunham
Reduces target count/compiler invocations by ~180.
2014-10-16scons: create dummy target to have SWIG generate C++ classesCurtis Dunham
scons build/<arch>/swig
2014-10-16config: Add a --without-python option to build processAndrew Bardsley
Add the ability to build libgem5 without embedded Python or the ability to configure with Python. This is a prelude to a patch to allow config.ini files to be loaded into libgem5 using only C++ which would make embedding gem5 within other simulation systems easier. This adds a few registration interfaces to things which cross between Python and C++. Namely: stats dumping and SimObject resolving
2014-08-13scons: Silence clang 3.4 warnings on Ubuntu 12.04Andreas Sandberg
This changeset fixes three types of warnings that occur in clang 3.4 on Ubuntu 12.04: * Certain versions of libstdc++ (primarily 4.8) use struct and class interchangeably. This triggers a warning in clang. * Swig has a tendency to generate code with the register class which was deprecated in C++11. This triggers a deprecation warning in clang. * Swig sometimes generates Python wrapper code which returns uninitialized values. It's unclear if this is actually a problem (the cases might be limited to failure paths). We'll silence these warnings for now since there is little we can do about the generated code.
2014-06-10scons: Bump the compiler version to gcc 4.6 and clang 3.0Andreas Hansson
This patch bumps the supported version of gcc from 4.4 to 4.6, and clang from 2.9 to 3.0. This enables, amongst other things, range-based for loops, lambda expressions, etc. The STL implementation shipping with 4.6 also has a full functional implementation of unique_ptr and shared_ptr.
2014-05-09arch: teach ISA parser how to split code across filesCurtis Dunham
This patch encompasses several interrelated and interdependent changes to the ISA generation step. The end goal is to reduce the size of the generated compilation units for instruction execution and decoding so that batch compilation can proceed with all CPUs active without exhausting physical memory. The ISA parser (src/arch/isa_parser.py) has been improved so that it can accept 'split [output_type];' directives at the top level of the grammar and 'split(output_type)' python calls within 'exec {{ ... }}' blocks. This has the effect of "splitting" the files into smaller compilation units. I use air-quotes around "splitting" because the files themselves are not split, but preprocessing directives are inserted to have the same effect. Architecturally, the ISA parser has had some changes in how it works. In general, it emits code sooner. It doesn't generate per-CPU files, and instead defers to the C preprocessor to create the duplicate copies for each CPU type. Likewise there are more files emitted and the C preprocessor does more substitution that used to be done by the ISA parser. Finally, the build system (SCons) needs to be able to cope with a dynamic list of source files coming out of the ISA parser. The changes to the SCons{cript,truct} files support this. In broad strokes, the targets requested on the command line are hidden from SCons until all the build dependencies are determined, otherwise it would try, realize it can't reach the goal, and terminate in failure. Since build steps (i.e. running the ISA parser) must be taken to determine the file list, several new build stages have been inserted at the very start of the build. First, the build dependencies from the ISA parser will be emitted to arch/$ISA/generated/inc.d, which is then read by a new SCons builder to finalize the dependencies. (Once inc.d exists, the ISA parser will not need to be run to complete this step.) Once the dependencies are known, the 'Environments' are made by the makeEnv() function. This function used to be called before the build began but now happens during the build. It is easy to see that this step is quite slow; this is a known issue and it's important to realize that it was already slow, but there was no obvious cause to attribute it to since nothing was displayed to the terminal. Since new steps that used to be performed serially are now in a potentially-parallel build phase, the pathname handling in the SCons scripts has been tightened up to deal with chdir() race conditions. In general, pathnames are computed earlier and more likely to be stored, passed around, and processed as absolute paths rather than relative paths. In the end, some of these issues had to be fixed by inserting serializing dependencies in the build. Minor note: For the null ISA, we just provide a dummy inc.d so SCons is never compelled to try to generate it. While it seems slightly wrong to have anything in src/arch/*/generated (i.e. a non-generated 'generated' file), it's by far the simplest solution.
2013-11-15cpu: allow the fetch buffer to be smaller than a cache lineAnthony Gutierrez
the current implementation of the fetch buffer in the o3 cpu is only allowed to be the size of a cache line. some architectures, e.g., ARM, have fetch buffers smaller than a cache line, see slide 22 at: http://www.arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf this patch allows the fetch buffer to be set to values smaller than a cache line.
2013-10-17build: Place proto output in the same directory, also for EXTRASAndreas Hansson
This patch changes the ProtoBuf builder such that the generated source and header is placed in the build directory of the proto file. This was previously not the case for the directories included as EXTRAS. To make this work, we also ensure that the build directory for the EXTRAS are added to the include path (which does not seem to automatically be the case).
2013-03-27scons: don't die on warnings in swig-generated codeSteve Reinhardt
There's not much to do about it other than disable the offending warning anyway, so it's not worth terminating the build over. Also suppress uninitialized variable warnings on gcc (happens at least with gcc 4.4 and swig 1.3.40).
2013-02-19scons: Unify the flags shared by gcc and clangAndreas Hansson
This patch restructures and unifies the flags used by gcc and clang as they are largely the same. The common parts are now dealt with in a shared block of code, and the few bits and pieces that are specifically affecting either gcc or clang are done separately.
2013-02-19scons: Add warning delete with non-virtual destructorAndreas Hansson
This patch enables a warning for deleting derived classes that do not have a virtual destructor. The patch merely adds additional checks, and there are currently no cases that had to be fixed.
2013-02-19scons: Add warning for missing declarationsAndreas Hansson
This patch enables warnings for missing declarations. To avoid issues with SWIG-generated code, the warning is only applied to non-SWIG code.
2013-01-07scons: Remove stale compiler optionsAndreas Hansson
This patch simply prunes the SUNCC and ICC compiler options as they are both sufficiently stale that they would have to be re-written from scratch anyhow. The patch serves to clean things up before shifting to a build environment that enforces basic c++11 compliance as done in the following patch.
2013-01-07scons: Add support for google protobuf buildingAndreas Hansson
This patch enables the use of protobuf input files in the build process, thus allowing .proto files to be added to input. Each .proto file is compiled using the protoc tool and the newly created C++ source is added to the list of sources. The first location where the protobufs will be used is in the capturing and replay of memory traces, involving the communication monitor and the trace-generator state of the traffic generator. This will follow in the next patch. This patch does add a dependency on the availability of the BSD licensed protobuf library (and headers), and the protobuf compiler, protoc. These dependencies are checked in the SConstruct, similar to e.g. swig. The user can override the use of protoc from the PATH by specifying the PROTOC environment variable. Although the dependency on libprotobuf and protoc might seem like a big step, they add significant value to the project going forward. Execution traces and other types of traces could easily be added and parsers for C++ and Python are automatically generated. We could also envision using protobufs for the checkpoints, description of the traffic-generator behaviour etc. The sky is the limit. We could also use the GzipOutputStream from the protobuf library instead of the current GPL gzstream. Currently, only the C++ source and header is generated. Going forward we might want to add the Python output to support simple command-line tools for displaying and editing the traces.
2012-11-02sim: Include object header files in SWIG interfacesAndreas Sandberg
When casting objects in the generated SWIG interfaces, SWIG uses classical C-style casts ( (Foo *)bar; ). In some cases, this can degenerate into the equivalent of a reinterpret_cast (mainly if only a forward declaration of the type is available). This usually works for most compilers, but it is known to break if multiple inheritance is used anywhere in the object hierarchy. This patch introduces the cxx_header attribute to Python SimObject definitions, which should be used to specify a header to include in the SWIG interface. The header should include the declaration of the wrapped object. We currently don't enforce header the use of the header attribute, but a warning will be generated for objects that do not use it.
2012-09-25build: Add missing dependencies when building param SWIG interfacesAndreas Sandberg
This patch adds an explicit dependency between param_%s.i and the Python source file defining the object. Previously, the build system didn't rebuild SWIG interfaces correctly when an object's Python sources were updated.
2012-09-14gcc: Enable Link-Time Optimization for gcc >= 4.6Andreas Hansson
This patch adds Link-Time Optimization when building the fast target using gcc >= 4.6, and adds a scons flag to disable it (-no-lto). No check is performed to guarantee that the linker supports LTO and use of the linker plugin, so the user has to ensure that binutils GNU ld >= 2.21 or the gold linker is available. Typically, if gcc >= 4.6 is available, the latter should not be a problem. Currently the LTO option is only useful for gcc >= 4.6, due to the limited support on clang and earlier versions of gcc. The intention is to also add support for clang once the LTO integration matures. The same number of jobs is used for the parallel phase of LTO as the jobs specified on the scons command line, using the -flto=n flag that was introduced with gcc 4.6. The gold linker also supports concurrent and incremental linking, but this is not used at this point. The compilation and linking time is increased by almost 50% on average, although ARM seems to be particularly demanding with an increase of almost 100%. Also beware when using this as gcc uses a tremendous amount of memory and temp space in the process. You have been warned. After some careful consideration, and plenty discussions, the flag is only added to the fast target, and the warning that was issued in an earlier version of this patch is now removed. Similarly, the flag used to enable LTO, now the default is to use it, and the flag has been modified to disable LTO. The rationale behind this decision is that opt is used for development, whereas fast is only used for long runs, e.g. regressions or more elaborate experiments where the additional compile and link time is amortized by a much larger run time. When it comes to the return on investment, the regression seems to be roughly 15% faster with LTO. For a bit more detail, I ran twolf on ARM.fast, with three repeated runs, and they all finish within 42 minutes (+- 25 seconds) without LTO and 31 minutes (+- 25 seconds) with LTO, i.e. LTO gives an impressive >25% speed-up for this case. Without LTO (ARM.fast twolf) real 42m37.632s user 42m34.448s sys 0m0.390s real 41m51.793s user 41m50.384s sys 0m0.131s real 41m45.491s user 41m39.791s sys 0m0.139s With LTO (ARM.fast twolf) real 30m33.588s user 30m5.701s sys 0m0.141s real 31m27.791s user 31m24.674s sys 0m0.111s real 31m25.500s user 31m16.731s sys 0m0.106s
2012-09-14scons: Add a target for google-perftools profilingAndreas Hansson
This patch adds a new target called 'perf' that facilitates profiling using google perftools rather than gprof. The perftools CPU profiler offers plenty useful information in addition to gprof, and the latter is kept mostly to offer profiling also on non-Linux hosts.
2012-09-14scons: Restructure ccflags and ldflagsAndreas Hansson
This patch restructures the ccflags such that the common parts are defined in a single location, also capturing all the target types in a single place. The patch also adds a corresponding ldflags in preparation for google-perf profiling support and the addition of Link-Time Optimization.
2012-08-28swig: Disable unused value warning with llvm 3.1 compilersAndreas Hansson
This patch disables a warning for unused values which causes problems when compiling the swig-generated sources using recent llvm-based compilers like llvm-gcc and clang.
2012-06-05sim: Provide a framework for detecting out of data checkpoints and migrating ↵Ali Saidi
them.
2012-05-10stats: fix compilation of unit test.Ali Saidi
2012-04-14clang/gcc: Fix compilation issues with clang 3.0 and gcc 4.6Andreas Hansson
This patch addresses a number of minor issues that cause problems when compiling with clang >= 3.0 and gcc >= 4.6. Most importantly, it avoids using the deprecated ext/hash_map and instead uses unordered_map (and similarly so for the hash_set). To make use of the new STL containers, g++ and clang has to be invoked with "-std=c++0x", and this is now added for all gcc versions >= 4.6, and for clang >= 3.0. For gcc >= 4.3 and <= 4.5 and clang <= 3.0 we use the tr1 unordered_map to avoid the deprecation warning. The addition of c++0x in turn causes a few problems, as the compiler is more stringent and adds a number of new warnings. Below, the most important issues are enumerated: 1) the use of namespaces is more strict, e.g. for isnan, and all headers opening the entire namespace std are now fixed. 2) another other issue caused by the more stringent compiler is the narrowing of the embedded python, which used to be a char array, and is now unsigned char since there were values larger than 128. 3) a particularly odd issue that arose with the new c++0x behaviour is found in range.hh, where the operator< causes gcc to complain about the template type parsing (the "<" is interpreted as the beginning of a template argument), and the problem seems to be related to the begin/end members introduced for the range-type iteration, which is a new feature in c++11. As a minor update, this patch also fixes the build flags for the clang debug target that used to be shared with gcc and incorrectly use "-ggdb".
2012-04-13SCons: restore Werror option in src/SConscriptSteve Reinhardt
Partial backout of cset 8b223e308b08. Although it's great that there's currently no need for Werror=false in the current tree, some of us have uncommitted code that still needs this option.
2012-04-09tests: Fix building unit tests.Gabe Black
Unit tests shouldn't build in gem5's main function because they have thier own.
2012-03-22Scons: Remove Werror=False in SConscript filesAndreas Hansson
This patch removes the overriding of "-Werror" in a handful of cases. The code compiles with gcc 4.6.3 and clang 3.0 without any warnings, and thus without any errors. There are no functional changes introduced by this patch. In the future, rather than ypassing "-Werror", address the warnings.
2012-03-06build scripts: Made minor modifications to reduce build overhead time.Marc Orr
1. --implicit-cache behavior is default. 2. makeEnv in src/SConscript is conditionally called. 3. decider set to MD5-timestamp 4. NO_HTML build option changed to SLICC_HTML (defaults to False)
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-09SWIG: Make gem5 compile and link with swig 2.0.4Andreas Hansson
To make gem5 compile and run with swig 2.0.4 a few minor fixes are necessary, the fail label issues by swig must not be treated as an error by gcc (tested with gcc 4.2.1), and the vector wrappers must have SWIGPY_SLICE_ARG defined which happens in pycontainer.swg, included through std_container.i. By adding the aforementioned include to the vector wrappers everything seems to work.
2011-11-09GCC: Guard some gcc flags so they're used when available and needed.Gabe Black
2011-10-31GCC: Get everything working with gcc 4.6.1.Gabe Black
And by "everything" I mean all the quick regressions.
2011-10-20scons/swig: refactor some of the scons/SWIG codeSteve Reinhardt
- Move the random bits of SWIG code generation out of src/SConscript file and into methods on the objects being wrapped. - Cleaned up some variable naming and added some comments to make the process a little clearer. - Did a little generated file/module renaming: - vptype_Foo now Foo_vector - init_Foo is now Foo_init This makes it easier to see all the Foo-related files in a sorted directory listing. - Made cxx_predecls and swig_predecls normal SimObject classmethods. - Got rid of swig_objdecls hook, even though this breaks the System objects get/setMemoryMode method exports. Will be fixing this in a future changeset.
2011-10-17scons: fix building of shared objectsNathan Binkert
2011-06-02scons: rename TraceFlags to DebugFlagsNathan Binkert
2011-06-02scons: rename some things from m5 to gem5Nathan Binkert
The default generated binary is now gem5.<type> instead of m5.<type>. The latter does still work but gem5.<type> will be generated first and then m5.<type> will be hard linked to it.
2011-06-02copyright: Add code for finding all copyright blocks and create a COPYING fileNathan Binkert
The end of the COPYING file was generated with: % python ./util/find_copyrights.py configs src system tests util Update -C command line option to spit out COPYING file
2011-04-20scons: Allow the build directory live under an EXTRAS directoryBrad Danofsky