summaryrefslogtreecommitdiff
path: root/src/arch/arm
AgeCommit message (Collapse)Author
2012-09-25ARM: Squash outstanding walks when instructions are squashed.Ali Saidi
2012-09-25arm: Use a static_assert to test that miscRegName[] is completeAndreas Sandberg
Instead of statically defining miscRegName to contain NUM_MISCREGS elements, let the compiler determine the length of the array. This allows us to use a static_assert to test that all registers are listed in the name vector.
2012-09-25ARM: Inst writing to cntrlReg registers not set as control instNathanael Premillieu
Deletion of the fact that instructions that writes to registers of type "cntrlReg" are not set as control instruction (flag IsControl not set).
2012-09-25ARM: Predict target of more instructions that modify PC.Ali Saidi
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28Clock: Rework clocks to avoid tick-to-cycle transformationsAndreas Hansson
This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-22Packet: Remove NACKs from packet and its use in endpointsAndreas Hansson
This patch removes the NACK frrom the packet as there is no longer any module in the system that issues them (the bridge was the only one and the previous patch removes that). The handling of NACKs was mostly avoided throughout the code base, by using e.g. panic or assert false, but in a few locations the NACKs were actually dealt with (although NACKs never occured in any of the regressions). Most notably, the DMA port will now never receive a NACK and the backoff time is thus never changed. As a consequence, the entire backoff mechanism (similar to a PCI bus) is now removed and the DMA port entirely relies on the bus performing the arbitration and issuing a retry when appropriate. This is more in line with e.g. PCIe. Surprisingly, this patch has no impact on any of the regressions. As mentioned in the patch that removes the NACK from the bridge, a follow-up patch should change the request and response buffer size for at least one regression to also verify that the system behaves as expected when the bridge fills up.
2012-08-15O3,ARM: fix some problems with drain/switchout functionality and add Drain ↵Anthony Gutierrez
DPRINTFs This patch fixes some problems with the drain/switchout functionality for the O3 cpu and for the ARM ISA and adds some useful debug print statements. This is an incremental fix as there are still a few bugs/mem leaks with the switchout code. Particularly when switching from an O3CPU to a TimingSimpleCPU. However, when switching from O3 to O3 cores with the ARM ISA I haven't encountered any more assertion failures; now the kernel will typically panic inside of simulation.
2012-08-06syscall emulation: Enabled getrlimit and getrusage for x86.Marc Orr
Added/moved rlimit constants to base linux header file. This patch is a revised version of Vince Weaver's earlier patch.
2012-08-06syscall emulation: Clean up ioctl handling, and implement for x86.Marc Orr
Enable different whitelists for different OS/arch combinations, since some use the generic Linux definitions only, and others use definitions inherited from earlier Unix flavors on those architectures. Also update x86 function pointers so ioctl is no longer unimplemented on that platform. This patch is a revised version of Vince Weaver's earlier patch.
2012-07-27ARM: fix value of MISCREG_CTR returned by readMiscReg()Anthony Gutierrez
According to the A15 TRM the value of this register is as follows (assuming 16 word = 64 byte lines) [31:29] Format - b100 specifies v7 [28] RAZ - b0 [27:24] CWG log2(max writeback size #words) - 0x4 16 words [23:20] ERG log2(max reservation size #words) - 0x4 16 words [19:16] DminLine log2(smallest dcache line #words) - 0x4 16 words [15:14] L1Ip L1 index/tagging policy - b11 specifies PIPT [13:4] RAZ - b0000000000 [3:0] IminLine log2(smallest icache line #words) - 0x4 16 words
2012-06-29ARM: Fix identification of one RAS pop instruction.Ali Saidi
The check should be with the op2 field, not with the op1 field.
2012-06-29ARM: Update version of linux we claim to be to 3.0.0.Ali Saidi
Static binaries generated with new versions of libc complain that the kernel is too old otherwise.
2012-06-29ARM: Fix issue with predicted next pc being wrong because of advance() ordering.Ali Saidi
npc in PCState for ARM was being calculated before the current flags were updated with the next flags. This causes an issue as the npc is incremented by two or four depending on the current flags (thumb or not) and was leading to branches that were predicted correctly being identified as mispredicted.
2012-06-11ARM: implement the ProcessInfo methodsAnthony Gutierrez
2012-06-05cpu: Don't init simple and inorder CPUs if they are defered.Anthony Gutierrez
initCPU() will be called to initialize switched out CPUs for the simple and inorder CPU models. this patch prevents those CPUs from being initialized because they should get their state from the active CPU when it is switched out.
2012-06-05ISA: Back-out NoopMachInst as a StaticInstPtr change.Ali Saidi
2012-06-05ARM: removed extra white spaceChander Sudanthi
Extra white space fixes in miscregs.hh
2012-06-05ARM: Fix MPIDR and MIDR register implementation.Chander Sudanthi
This change allows designating a system as MP capable or not as some bootloaders/kernels care that it's set right. You can have a single processor MP capable system, but you can't have a multi-processor UP only system. This change also fixes the initialization of the MIDR register.
2012-06-05O3: Clean up the O3 structures and try to pack them a bit better.Ali Saidi
DynInst is extremely large the hope is that this re-organization will put the most used members close to each other.
2012-06-05ARM: Fix compilation on ARM after Gabe's change.Ali Saidi
2012-05-26ISA,CPU: Generalize and split out the components of the decode cache.Gabe Black
This will allow it to be specialized by the ISAs. The existing caching scheme is provided by the BasicDecodeCache in the GenericISA namespace and is built from the generalized components. --HG-- rename : src/cpu/decode_cache.cc => src/arch/generic/decode_cache.cc
2012-05-26CPU: Merge the predecoder and decoder.Gabe Black
These classes are always used together, and merging them will give the ISAs more flexibility in how they cache things and manage the process. --HG-- rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-25ISA: Make the decode function part of the ISA's decoder.Gabe Black
2012-05-25Decode: Make the Decoder class defined per ISA.Gabe Black
--HG-- rename : src/cpu/decode.cc => src/arch/generic/decoder.cc rename : src/cpu/decode.hh => src/arch/generic/decoder.hh
2012-05-23DMA: Split the DMA device and IO device into seperate filesAndreas Hansson
This patch moves the DMA device to its own set of files, splitting it from the IO device. There are no behavioural changes associated with this patch. The patch also grabs the opportunity to do some very minor tidying up, including some white space removal and pruning some redundant parameters. Besides the immediate benefits of the separation-of-concerns, this patch also makes upcoming changes more streamlined as it split the devices that are only slaves and the DMA device that also acts as a master. --HG-- rename : src/dev/io_device.cc => src/dev/dma_device.cc rename : src/dev/io_device.hh => src/dev/dma_device.hh
2012-05-23MEM: Add a snooping DMA port subclass for table walkerAndreas Hansson
This patch makes the (device) DmaPort non-snooping and removes the recvSnoop constructor parameter and instead introduces a SnoopingDmaPort subclass for the ARM table walker. Functionality is unchanged, as are the stats, and the patch merely clarifies that the normal DMA ports are not snooping (although they may issue requests that are snooped by others, as done with PCI, PCIe, AMBA4 ACE etc). Currently this port is declared in the ARM table walker as it is not used anywhere else. If other ports were to have similar behaviour it could be moved in a future patch.
2012-05-10ARM: guard masked symbol tables by defaultDam Sunwoo
Symbol tables masked with the loadAddrMask create redundant entries that could conflict with kernel function events that rely on the original addresses. This patch guards the creation of those masked symbol tables by default, with an option to enable them when needed (for early-stage kernel debugging, etc.)
2012-05-10gem5: Fix a number of incorrect case statementsAli Saidi
2012-04-23ISA: Put parser generated files in a "generated" directory.Gabe Black
This is to avoid collision with non-generated files.
2012-04-14MEM: Remove the Broadcast destination from the packetAndreas Hansson
This patch simplifies the packet by removing the broadcast flag and instead more firmly relying on (and enforcing) the semantics of transactions in the classic memory system, i.e. request packets are routed from a master to a slave based on the address, and when they are created they have neither a valid source, nor destination. On their way to the slave, the request packet is updated with a source field for all modules that multiplex packets from multiple master (e.g. a bus). When a request packet is turned into a response packet (at the final slave), it moves the potentially populated source field to the destination field, and the response packet is routed through any multiplexing components back to the master based on the destination field. Modules that connect multiplexing components, such as caches and bridges store any existing source and destination field in the sender state as a stack (just as before). The packet constructor is simplified in that there is no longer a need to pass the Packet::Broadcast as the destination (this was always the case for the classic memory system). In the case of Ruby, rather than using the parameter to the constructor we now rely on setDest, as there is already another three-argument constructor in the packet class. In many places where the packet information was printed as part of DPRINTFs, request packets would be printed with a numeric "dest" that would always be -1 (Broadcast) and that field is now removed from the printing.
2012-04-14clang/gcc: Fix compilation issues with clang 3.0 and gcc 4.6Andreas Hansson
This patch addresses a number of minor issues that cause problems when compiling with clang >= 3.0 and gcc >= 4.6. Most importantly, it avoids using the deprecated ext/hash_map and instead uses unordered_map (and similarly so for the hash_set). To make use of the new STL containers, g++ and clang has to be invoked with "-std=c++0x", and this is now added for all gcc versions >= 4.6, and for clang >= 3.0. For gcc >= 4.3 and <= 4.5 and clang <= 3.0 we use the tr1 unordered_map to avoid the deprecation warning. The addition of c++0x in turn causes a few problems, as the compiler is more stringent and adds a number of new warnings. Below, the most important issues are enumerated: 1) the use of namespaces is more strict, e.g. for isnan, and all headers opening the entire namespace std are now fixed. 2) another other issue caused by the more stringent compiler is the narrowing of the embedded python, which used to be a char array, and is now unsigned char since there were values larger than 128. 3) a particularly odd issue that arose with the new c++0x behaviour is found in range.hh, where the operator< causes gcc to complain about the template type parsing (the "<" is interpreted as the beginning of a template argument), and the problem seems to be related to the begin/end members introduced for the range-type iteration, which is a new feature in c++11. As a minor update, this patch also fixes the build flags for the clang debug target that used to be shared with gcc and incorrectly use "-ggdb".
2012-04-06MEM: Enable multiple distributed generalized memoriesAndreas Hansson
This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-21ARM: Fix case where cond/uncond control is mis-specifiedNathanael Premillieu
2012-03-21ARM: Clean up condCodes in IT blocks.Ali Saidi
2012-03-21ARM: IT doesn't need to be serializing.Geoffrey Blake
2012-03-19gcc: Clean-up of non-C++0x compliant code, first stepsAndreas Hansson
This patch cleans up a number of minor issues aiming to get closer to compliance with the C++0x standard as interpreted by gcc and clang (compile with std=c++0x and -pedantic-errors). In particular, the patch cleans up enums where the last item was succeded by a comma, namespaces closed by a curcly brace followed by a semi-colon, and the use of the GNU-extension typeof (replaced by templated functions). It does not address variable-length arrays, zero-size arrays, anonymous structs, range expressions in switch statements, and the use of long long. The generated CPU code also has a large number of issues that remain to be fixed, mainly related to overflows in implicit constant conversion (due to shifts).
2012-03-09ARM: Fix branch prediction issue with CB(N)Z instructionBrian Grayson
2012-03-09CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectableGeoffrey Blake
Enables the CheckerCPU to be selected at runtime with the --checker option from the configs/example/fs.py and configs/example/se.py configuration files. Also merges with the SE/FS changes.
2012-03-09ARM: Don't reset CPUs that are going to be switched in.Ali Saidi
2012-03-09System: Move code in initState() back into constructor whenever possible.Ali Saidi
The change to port proxies recently moved code out of the constructor into initState(). This is needed for code that loads data into memory, however for code that setups symbol tables, kernel based events, etc this is the wrong thing to do as that code is only called when a checkpoint isn't being restored from.
2012-03-09ARM: Fix valgrind reported error on O3 that was causing minor stats changes.Ali Saidi
2012-03-02ARM: FIx a bug preventing multiple cores booting a VExpress_EMM machine.Ali Saidi
New kernel code verifies that multi-processor extensions are available before booting secondary CPUs.
2012-03-01ARM: Add support for Versatile Express extended memory mapAli Saidi
Also clean up how we create boot loader memory a bit.
2012-03-01ARM: Add limited CP14 support.Matt Horsnell
New kernels attempt to read CP14 what debug architecture is available. These changes add the debug registers and return that none is currently available.
2012-03-01ARM: move kernel func event to correct location.Dam Sunwoo
With the recent series of patches, the symbol table loading moved from "construct" time to "init" time, but the kernel function event callback registration was left behind. This patch moves it to the proper location.
2012-03-01ARM: fix bits-to-fp conversion function declarations.Giacomo Gabrielli
Add extra declarations to allow the compiler to pick up the right function. Please note that these declarations have been added as part of the clang-related changes.
2012-02-24MEM: Make port proxies use references rather than pointersAndreas Hansson
This patch is adding a clearer design intent to all objects that would not be complete without a port proxy by making the proxies members rathen than dynamically allocated. In essence, if NULL would not be a valid value for the proxy, then we avoid using a pointer to make this clear. The same approach is used for the methods using these proxies, such as loadSections, that now use references rather than pointers to better reflect the fact that NULL would not be an acceptable value (in fact the code would break and that is how this patch started out). Overall the concept of "using a reference to express unconditional composition where a NULL pointer is never valid" could be done on a much broader scale throughout the code base, but for now it is only done in the locations affected by the proxies.
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.