| Age | Commit message (Collapse) | Author |
|---|
|
|
|
aarch64 floating point registers are now stored as vector type, but this
was not updated in the stub.
Change-Id: I4a2bc1cea0eec9beeb5bbd49e2a868b9d5ed0a42
Reviewed-on: https://gem5-review.googlesource.com/c/14498
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The entire pcState was being reset, which made the simulation incorrectly
switch to aarch32 from aarch64.
Change-Id: I9ba7dd0ed95bc6120d94393bba272e0cb8c081c5
Reviewed-on: https://gem5-review.googlesource.com/c/14496
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The main change is to remove vector registers from the GDB stub.
Those registers were intended for SVE, which is a new architecture feature
and not yet treated by default on the GDB present in Ubuntu 18.04, and
possibly not even on GDB master.
As a result, aarch64 GDB stub connections would fail with:
Remote 'g' packet reply is too long
The correct way to support those registers is to send XML GDB target
description files to the client. This feature is not yet available for
any architecture, and should be implemented in future patches.
Other smaller fixes are:
* cpsr is uint32_t in aarch64 as well as arm
* use M5_ATTR_PACKED on the register structs since they are being cast and
sent as byte arrays
Change-Id: I77cd8a98e322ecc60799e5b11fe5cd414d893cc7
Reviewed-on: https://gem5-review.googlesource.com/c/14495
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The lack of a template declaration for IllegalInstSetStateFault was
causing errors when compiling with clang.
Change-Id: If7f19d7e879330226c80df2baca73d88d818f673
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14618
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The value that is not initialized has a bogus value that manifests when
using some debug-flags what makes the usage of tracediff a bit more
challenging.
In addition, while debugging with other techniques, it introduces the
problem of understanding if the value of a field is 'intended' or just
an effect of the lack of initialisation.
Change-Id: Ied88caa77479c6f1d5166d80d1a1a057503cb106
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13125
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Fix 1: std::pair constructor is not a constexpr in clang implementation
Fix 2: static const templates need to be defined in their
translation unit
Change-Id: I3d9b9b47e1d148e44555f40e2e2aeff06707ff8f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14617
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.
This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.
Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
With this patch we don't print anymore the enum value when warning
on any AT instruction usage, but we print the sys reg name instead
Change-Id: Ic6831b98ad6b0582be69883dc9519a9d3324da30
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14316
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is implicitly deprecating the usage of bootloader patching,
which is injecting instructions from gem5 into the bootloader
binary. This was probably meant to provide a dynamic bootloader
entry point.
This is not needed in ARMv8.0, since we can simply update the
ArmSystem::resetAddress with the bootloader entry point.
Change-Id: I0c469873b8d69f7b49a7383e0754468bc1f2bd72
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14001
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8 differs from ARMv7 with the presence of RVBAR register, which
contains the implementation defined reset address when EL3 is not
implemented.
The entry 0x0 in the AArch32 vector table, once used for the Reset
Vector, is now marked as "Not used", stating that it is now IMPLEMENTATION
DEFINED. An implementation might still use this vector table entry to
hold the Reset vector, but having a Reset address != than the general
vector table (for any other exception) is allowed.
At the moment any Reset exception is still using 0 as a vector table
base address. This patch is extending the ArmSystem::resetAddr64 to
ArmSystem::resetAddr so that it can be used for initializing
MVBAR/RVBAR. In order to do so, we are providing a specialized behavior
for the Reset exception when evaluating the vector base address.
Change-Id: I051a730dc089e194db3b107bbed19251c661f87e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14000
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
RVBAR has been added to the system register list since ARMv8.0-A. It is
implemented only if the highest Exception Level is different (minor)
than EL3. If that's not the case, MVBAR is used. Since the two
registers are mutually exclusive (depending on the presence of EL3),
they share the same coprocessor numbers:
p15, 0, c12, c0, 1
Rather than introducing a new register alias, we overload MVBAR so that
it is treated as RVBAR if ArmSystem::highestEL() < EL3. This patch is
changing the MiscReg info so that EL1 or EL2 access MVBAR (as RVBAR).
N.B MVBAR is RW, whereas RVBAR is RO
Change-Id: Ida3070413fd151ce79c446e99a2a389298d5f5bd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13999
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8 has removed SCTLR.VE bit which is now hardcoded to 0. We are
removing it from gem5 since we were not handling it anyway.
Change-Id: Ibde2db45c7f8add4a3188f2cb8c23701a6088d03
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13998
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The patch is also moving some initialization code to be used
by AArch64 as well since the registers are mapped to AArch64 ones.
Change-Id: I0089df25275434172c6e0e9cb125ee535c04d1b8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13997
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Having an enum number might be useful in case we wanted to know how many
miscregs we have, but on the other hand it makes it tedious to update
the register list, since every commented number must be bumped. This
patch is removing the comments holding the MISCREG numbers
Change-Id: Ic5aba93885e4b8d6cb3bd6a4c49900b9e5474276
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13996
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When a s2Lookup object is created, a new request is created, based
upon the original, stage 1 request sent out by the CPU. When a fault
occurs during the second stage of translation, this new request is
returned. This can lead to issues with the O3 CPU. The O3 fetch stage
will not acknowledge the fault as it is a different request than the
one it sent out and does not contain a contextID. This commit
rectifies this.
Change-Id: I21cb7377a59aed9d90d99f048b2106eaf219e93a
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13782
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Some address translation instructions will stop translation after
the 1st stage and intercept the IPA, even in the presence of
stage 2 (eg AT S1E1). However, in the case of a TLB miss, the
table descriptors still need to be translated from IPA to PA to
avoid fetching the wrong addresses. This commit splits whether
IPA->PA translation is required for the VA and/or for the table
descriptors.
Change-Id: Ie53cdc00585f116150256f1d833460931b3bfb7d
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13781
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This is especially important because the Ubuntu 18.04 packaged
arm-linux-gnueabihf-gcc uses the system call on the program initialization,
which leads all programs to fail with:
fatal: syscall openat (#322) unimplemented.
Change-Id: I5596162ad19644df7b6d21f2a46acc07030001ae
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13004
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I898e5b565c6591f88ae732b24713aeae2c827cbd
Reviewed-on: https://gem5-review.googlesource.com/c/13815
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Note current PRFM supports only PLD, but PST (prefetch for store) is
also important for latency hiding. We also bug fix in disassembler to
display prfop correctly.
Change-Id: I9144e7233900aa2d555e1c1a6a2c2e41d837aa13
Signed-off-by: Yuetsu Kodama <yuetsu.kodama@riken.jp>
Reviewed-on: https://gem5-review.googlesource.com/c/13675
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
According to the arm arm, a SYS instruction (op0 = 1) with CRn = (11 or
15) is implementation defined; this makes it trappable by having
HCR_EL2.TIDCP = 1.
Change-Id: Idd94ac345fee652ee6f8c0a7eb7b06ac75ec38ef
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13780
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
While there is a AArch32 class for instructions accessing implementation
defined registers, we are lacking for the AArch64 counterpart.
we were relying on FailUnimplemented, which is untrappable at EL2 (except
for HCR_EL2.TGE) since it is just raising Undefined Instruction.
Change-Id: I923cb914658ca958af031612cf005159707b0b4f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13779
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch refactors AArch64 MSR/MRS trapping, by moving the trapping
helpers in arch/arm/utility and in the isa code into a MiscRegOp64
class.
This class is the Base class for a generic AArch64 instruction which is
making use of system registers (MiscReg), like MSR,MRS,SYS. The common
denominator or those instruction is the chance that the system register
access is trapped to an upper Exception level. MiscRegOp64 is providing
that feature.
What do we gain? Other "pseudo" instructions, like access to
implementation defined registers can inherit from this class to make use
of the trapping functionalities even if there is no data movement
between GPRs and system register.
Change-Id: I0924354db100de04f1079a1ab43d4fd32039e08d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13778
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
MRS/MSR Instructions should trap to EL2 only if we are in non-Secure
state since at the current implementation (Armv8.0) there is no Secure
EL2.
Change-Id: I93af415fbcbd19a470752adf6afc92e520e9645d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13777
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing HVC trapping behaviour, reusing the pseudocode
implementation provided in the arm arm.
Change-Id: I0bc81478400b99d84534c1c8871f894722f547c5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13776
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
According to the arm arm, CPTR_EL3.TCPAC traps EL2 accesses to the
CPTR_EL2 or HCPTR, and EL2 and EL1 accesses to the CPACR_EL1 or CPACR,
are trapped to EL3, unless they are trapped by CPTR_EL2.TCPAC.
Change-Id: I637be35b29db39f044dda0c6cc4fe986c9620371
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13775
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ida2a746e6188171bd2e4da92a4efb33fcbaa2b69
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13476
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This fixes:
- unallocated hints that have since been allocated
- unallocated and unimplemented hint instructions being treated as
Unknown instead of the correct NOP
- missing encoding for DBG on A32
Unallocated and unimplemented hints give a warning if executed.
The most important fix was for the CSDB Spectre mitigation
instruction, which was added recently and previously unallocated and
treated as Unknown.
The Linux kernel v4.18 ARMv7 uses CSDB it and boot would
fail with "undefined instruction" since Linux commit
1d4238c56f9816ce0f9c8dbe42d7f2ad81cb6613
Change-Id: I283da3f08a9af4148edc6fb3ca2930cbb97126b8
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13475
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This type is defined for all the ISAs but isn't used by anything.
Change-Id: I659a0c5abc7883d82fedd1cac2cd103612d315c8
Reviewed-on: https://gem5-review.googlesource.com/c/13539
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Trying to compile an ARM C hello world with arm-linux-gnueabihf-gcc from
Ubuntu 16.04 leads to a runtime failure with se.py:
FATAL: kernel too old
because the glibc tests if the kernel is at least 3.2.0, and gem5 was
reporting 3.0.0.
Furthermore, it is hard to obtain such toolchain at all: for example
crosstool-NG currently only allows for minimum kernels above 3.2.0.
3.7.0+ was chosen to match the aarch64 value, as it is likely that the
level of support will be very similar.
This commit does not guarantee that full 3.7.0 is supported, but it is
not likely that we had full 3.0.0 support previously either.
However, it is more likely that such support will be eventually achieved
if users can at least try out their programs and implement the missing
system calls as they are found.
Change-Id: I8df3763ae49788a6cb11cb0920e8202cd56b0f09
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12986
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds the have_crypto ArmSystem parameter for enabling crypto
extension. This is done by modifying the AArch32/AArch64 ID registers
at startup time.
Change-Id: I6eefb7e6f6354802a14ea639ad53b75f8e1e11c5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13252
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch implements the AArch64 AES instructions
from the Crypto extension.
Change-Id: I9143041ec7e1c6a50dcad3f72d7d1b55d6f2d402
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13250
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements the AArch64 secure hashing instructions
from the Crypto extension.
Change-Id: I2cdfa81b994637c880f2523fe37cdc6596d05cb1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13249
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements the AArch32 AES instructions
from the Crypto extension.
Change-Id: I51e6deda748b0c26135bcfe9d0c7128f3af91f3d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Matt Horsnell <matt.horsnell@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13248
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements the AArch32 secure hashing instructions
from the Crypto extension.
Change-Id: Iaba8424ab71800228a9aff039d93f5c35ee7d8e5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13247
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.
Furthermore, trying to use it fails with:
object 'RealViewEB' has no attribute 'pci_host'
and the last commit in the class happened two years ago, which indicates
that no one has been using it.
Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Allows compilation on clang3.5+ by fixing Winconsistent-missing-override
Change-Id: Ic0ebf3869fc2d9a29fcf7cf5a6535952f41714d0
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13227
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ArmProcess64 needs to query AArch64 ID registers to check which hw
capability is going to report in the appropriate aux vector's entry.
Change-Id: I1e1294b831e902226f9b162f25e841e53b940454
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13164
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
AArch32 and AArch64 have different HWCAP flags in Linux, but we are
currently using AArch32 HWCAP flags to initialize the aux vector of both
AArch32 and AArch64 binaries.
This patch also fixes a bug that was introduced by running in SE mode a
target binary compiled with glibc > 2.18. Using AArch32 flags
resulted on CPUID flag being set for AArch64. This incorrectly tells
libc that emulation of the midr_el1 is supported.
In FullSystem this might work, but since we are in Syscall Emulation
there is no OS behind emulating the mrs midr_el1 instruction.
By separating AArch32 flags from AArch64 flags we are turning off the
CPUID hwcap flag in SE mode.
Change-Id: I9f651957ba9d19dc2bc06606de070c6586f0f9fa
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12884
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
This changeset adds support for FP/SIMD instructions with
half-precision floating-point operands.
Change-Id: I4957f111c9c5e5d6a3747fe9d169d394d642fee8
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13084
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This changeset:
- extends fplib to support emulation of half-precision floating-point
(FP16) operations;
- extends fplib to support additional primitives introduced by the Arm
Scalable Vector Extension (SVE) (fplibExpa, fplibScale,
fplibTrigMAdd, fplibTrigSMul, fplibTrigSSel);
- adds the FZ16 bit to FPSCR;
- cleans up fplib code by replacing constants with preprocessor macros
and by adding inline functions to recognise NaNs and infinities.
Change-Id: If8fdb2a5824b478c8310bbc126ec60cc1105f135
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13044
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is implementing the following AArch64 ID registers as
bitunions, so that it is easier to query for feature availability:
- ID_AA64DFR0_EL1
- ID_AA64ISAR0_EL1
- ID_AA64ISAR1_EL1
- ID_AA64MMFR1_EL1
- ID_AA64MMFR2_EL1
- ID_AA64PFR0_EL1
They are updated to the latest Armv8.5 arch release version.
RES0 only ID registers like ID_AA64AFR1_EL1 haven't been added.
Change-Id: Ied037abe3757421bcfc2834d397a8cf9a2b9f0a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13067
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements AArch64 Memory Model Feature Register 2
(from ARMv8.2)
Change-Id: I16d9acaf620fac6d1206e208bd143daec1657daf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13066
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
As the number of MiscRegs increases there is the need of a cleaner
header file; this patch is separating miscreg.[cc,hh] where the miscreg
decoding/utility functions are defined/declared from the MiscReg
register types (BitUnion).
Change-Id: I815f53b117b50e47f93aa13d78356ef09d2a2541
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13065
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
One of the auxv vector's flag is the HWCAP, whose bits match the content
of several arm ID registers. This patch factors out AArch64 ID
registers init into a separate method and creates the symmetric AArch32
ID register init as well, so that we get a meaningful auxiliary vector
in SE mode.
Change-Id: I52bdb31b67508c4447558ebd7ca743733a69280e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13064
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Writing a 1 to the Overflow Flag Status register should trigger an
interrupt raise/clear depending on the register we are currently using
(PMOVSCLR for clearing and PMOVSSET for raising).
Change-Id: I2091456685a245712045cf7a4932ac36b7dded1d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12531
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The AuxVector class is responsible for holding Process data.
The data that it holds is normally setup by an OS kernel in
the process address space. The purpose behind doing this is
to pass in information that the process will need for various
reasons. (Check out the enum in the header file for an idea of
what the AuxVector holds.)
The AuxVector struct was changed into a class and encapsulation
methods were added to protect access to the member variables.
The host ISA may have a different endianness than the simulated
ISA. Since data is passed between the process address space and
the simulator for auxiliary vectors, we need to worry about
maintaining endianness for the right context.
Change-Id: I32c5ac4b679559886e1efeb4b5483b92dfc94af9
Reviewed-on: https://gem5-review.googlesource.com/12109
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Sometimes it's easier to debug gem5 built with ASan enabled. This CL fixes
some build error when using --with-asan.
Bug: None
Test: ./scripts/build_gem5 --with-asan --with-ubsan build/ARM/gem5.debug
Change-Id: Iaaaaebc3f25749e11f97bf454ddd0153b3de56e7
Reviewed-on: https://gem5-review.googlesource.com/12511
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When doing EL0/1 translation in stage2, the
physical address size will be defined by the
hypervisor (via VTCR_EL2.ps, not TCR.ips).
See D10.2.121 of the ARM ARM.
Change-Id: Ic7df97c0f5950a648f7408cde3955a640b562c1d
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12552
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
This commit corrects how the address size is
determined in EL2/EL3. Previously, TCR_ELx.ips
was used but this should be TCR_ELx.ps.
Change-Id: I7e5a2f376335532a1d1c8c74d12a416617474ae2
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12551
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
