| Age | Commit message (Collapse) | Author |
|---|
|
This patch replaces the dummy values which were defined for the
SecureMonitorTrap thus enabling its usage in aarch32 mode. 1) It
changes the vector table offset from 0x14 to 0x4 in compliance with the
armv8 documentation. 2) When trapping in monitor mode for aarch32, the
mon_lr is updated with the pc + a non zero offset (+4/2 depending on the
current instruction set: +4 for A32, +2 for T32).
Change-Id: I01e1e52bf5ecd405e7472e31e01cf9a599153b08
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8041
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The old code chose vector offset associated with exceptions taken
to EL3 by incorrectly using "from64", which is associated with the
exception level where the exception was taken from. However, the
offset should depends on the ISA of the lower EL and not of the
starting EL itself, as specified in ARM ARM. This patch corrects
this by implementing the method in AArch64.TakeException in ARM ARM.
Change-Id: I8f7c9aa777c5f2eef9e2d89c36e9daee23f3a822
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8001
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch fixes the Illegal Exception return handler. According to the
armarm documentation, when PSTATE.IL is set to one because of an illegal
exception return, PSTATE.{EL, nRW, SP} are unchanged. This means the
Exception level, Execution state, and stack pointer selection do not
change as a result of the return.
Change-Id: I35f2fe68fb2822a54fc4a21930871eab7a1aaab4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8021
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Supervisor Trap is supposed to be able to handle exceptions routed
to EL2, which is enabled by HCR_EL2.TGE. This fix adds routeToHyp()
function to Supervisor Trap to handle this, similar to that in
UndefinedFault, DataAbort, etc.
Change-Id: I1fcf9f2d445ecbc13c8f6d3b7d599728b0250ab7
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7961
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I00f957a3bc4721a66db62b1257f10e9019a94608
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7829
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Change-Id: Ib47f4134e3f0a580e5356d384a5d3b293c1af7be
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7828
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
In AArch32, data cache maintenance instructions that operate by VA do
not generate permission faults.
In AArch64, a data cache invalidate instruction can generate a
permission fault when there are no write permissions to the specified
VA. Data cache clean and data cache clean and invalidate instructions
do not generate permission faults.
Checks for external aborts are also bypassed for data cache
maintenance instructions.
Change-Id: Iea5bc665e4cf66d528e36b671535b66637c4b224
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7827
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The Arm ARM defines that at EL1 a data cache invalidate instruction
performs a data cache clean and invalidate operation if all of the
following apply:
* EL2 is implemented,
* HCR_EL2.VM is set to 1,
* SCR_EL3.NS is set to 1 or EL3 is not implemented.
This changeset implements this behavior.
Change-Id: I6b6aef2f4b1e7eb107c069fdb0a10f4aa8e6b196
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7826
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I2322c7bf65b38cb07a1ea2b5dc25dfc5a0496cf0
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7825
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Cache maintenance operations operate on whole cache blocks. This
changeset uses the system cache line size as the size of the cache
maintenance requests and masks the lower bits of the effective
address.
Change-Id: I6e7aefff51670c8cac39e4e73db21a0c5a0b7aef
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7824
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
A previous change enabled execution of dc ivac from EL0 when
SCTLR_EL1.UCI=1. The Arm ARM specifies that dc ivac is the only data
cache maintenance operation by VA that cannot be executed from
EL0. This changeset essential reverts the change:
8d43922 arch-arm: Allow dc ivac from EL0 when SCTLR_EL1.UCI=1
Change-Id: Ia25fab13846a151f548e649a16067feb1ff65c9c
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7823
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This commit changes the function's name used for retrieving the index of a
security banked register given the flatten index. This will avoid confusion
with flattenRegId, which has a different purpose.
Change-Id: I470ffb55916cb7fc9f78e071a7f2e609c1829f1a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7982
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch fixes AArch32 SETEND instruction, which was previously
executed unconditionally without checking (H)SCTLR.SED field. This bit
enables/disables the trapping of the instruction.
Change-Id: Ib3d2194c8d16c34ec2a9ab3e8090081900c1e42e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7981
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Fixed Illegal Exception Return detection, which was not
covering all the documented cases.
Change-Id: If08ddc1490d1c0a1fccee1489d116384770ce0a5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7223
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch implements the ELUsingAArch32K pseudocode, which is returning
true if the provided Exception Level is using A32 ISA, but it is not
panicking (quitting simulation) if the information is unknown (see
documentation).
The panicking is the current behaviour of the ELIs32 utility in gem5.
Change-Id: Iad7b56077d7e0f8ee223b5b9593cb8097f26bb29
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7222
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch introduces the inSecureBelow pseudocode function
defined in the armarm documentation. It also replaces the
inSecureState function call which was improperly used in
ELIs32: we might be in secure state (EL3), but with non-secure
lower ELs (SCR.NS = 1).
Change-Id: I01febcb54392ad4e51e785b4d5153aeb3437c778
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7221
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The state of EL1 wasn't determined correctly when running in secure
mode if virtualisation was enabled. This changset updates the
implementation to match the canonical behavior from the ARM ARM.
Change-Id: I7ed6f5c003617773603f678667aac069d73b6f62
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7141
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
ISB Serializing behaviour is guaranteed by IsSquashAfter,
which is inherently serializing; when instruction is commited,
consecutive instructions are flushed and refetched.
Change-Id: I05e61b4cf9f01113d95b1502c996d04cbd69b759
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5701
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Move massive initialization routine to the bottom of miscregs.cc.
Additionally, share register metadata across ISA instances by
making lookUpMiscReg a static member of the ISA and only
initializing it once.
Change-Id: I6d6ab26200c4e781151cc6efd97ce2420e2bf4cc
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6803
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implement proper handling of RES0/RES1 and RAZ/RAO bitfields.
Change-Id: I344c32c3fb1d142acfb0521ba3590ddd2b1f5360
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6802
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The mappings for sharing a backing store between AArch32
and AArch64 system registers are made clearer using an
initializer object.
Change-Id: I29dcfab2797b4d36b3182342997edffde334a291
Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6801
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implements a high level method for generating a Device Tree node for
an AbstractMemory object.
Change-Id: I544ec642f182f103df26de535fdfaf03b3787a08
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5964
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds an extra layer to the pyfdt library such that usage
gets easier and device tree nodes can be specified in less code,
without limiting original usage. Note to not import both the pyfdt
and fdthelper in the same namespace (but generally fdthelper is all
you need, because it supplies the same classes even when they are not
extended in any way)
Also, this patch lays out the primary functionality for generating a
device tree, where every SimObject gets an empty generateDeviceTree
method and ArmSystems loop over their children in an effort to merge
all the nodes. Devices are implemented in other patches.
Change-Id: I4d0a0666827287fe42e18447f19acab4dc80cc49
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5962
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This avoids having a copy in the lookup function itself, and the
declaration of a lot of temporary TLB entry pointers in callers. The
gpu TLB seems to have had the most dependence on the original signature
of the lookup function, partially because it was relying on a somewhat
unsafe copy to a TLB entry using a base class pointer type.
Change-Id: I8b1cf494468163deee000002d243541657faf57f
Reviewed-on: https://gem5-review.googlesource.com/7343
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The ARM types.hh file defined an STL style hash structure to operate
on the ExtMachInst, but it referred to the underlying storage type
using internal typedefs in the BitUnion types. To avoid having to do
that, this change adds a hash structure to bitunion.hh which will work
on any BitUnion, and gets rid of the ARM ExtMachInst version.
Change-Id: I7c1c84d61b59061fec98abaaeab6becd06537dee
Reviewed-on: https://gem5-review.googlesource.com/7204
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
They are now oriented around a class which makes it easy to provide
custom setter/getter functions which let you set or read bits in an
arbitrary way.
Future additions may add the ability to add custom bitfield methods,
and index-able bitfields.
Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333
Reviewed-on: https://gem5-review.googlesource.com/7201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Fold the GDBListener class into the main BaseRemoteGDB class, move
around a bunch of functions, convert a lot of internal functions to
be private, move some functions into the .cc, make some functions
non-virtual which didn't really need to be overridden.
Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d
Reviewed-on: https://gem5-review.googlesource.com/7422
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Now that Nothing inherits from PageTableBase directly, it can be
merged into FuncPageTable. This change also takes the opportunity to
rename the combined class to EmulationPageTable which lets you know
that it's specifically for SE mode.
Also remove the page table entry cache since it doesn't seem to
actually improve performance. The TLBs likely absorb the majority of
the locality, essentially acting like a cache like they would in real
hardware.
Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13
Reviewed-on: https://gem5-review.googlesource.com/7342
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
When switching an assert to a fatal while addressing recent review
feedback, I forgot to reverse the polarity of the condition, making
the fatal fire in exactly the opposite of the conditions it was meant
to.
Change-Id: Icf49864ef449052bbb0d427dca786006166575c4
Reviewed-on: https://gem5-review.googlesource.com/7381
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
These were still inheriting from SimObject instead of BaseTLB, making
them incompatible with parameters which expect a BaseTLB.
Change-Id: I05115cc5515f745fdeb85e4dea8eded613647e40
Reviewed-on: https://gem5-review.googlesource.com/7348
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This breaks one more architecture dependence outside of the ISAs.
Change-Id: I071f9ed73aef78e1cd1752247c183e30854b2d28
Reviewed-on: https://gem5-review.googlesource.com/6982
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
This gets rid of an awkward NoArchPageTable class, and also gives the
arch a place to inject ISA specific parameters (specifically page size)
without having to have TheISA:: in the generic version of these types.
Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441
Reviewed-on: https://gem5-review.googlesource.com/6981
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Several files in the repository were tracked with execute permissions
even though the files are just normal C/C++ files (and the one .isa).
Change-Id: I976b096acab4a1fc74c5699ef1f9b222c1e635c2
Reviewed-on: https://gem5-review.googlesource.com/7241
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This constant is, first, a #define, and second only used in one place.
In that one place, it appears that the code it guards is no longer
necessary in general. It was originally written to avoid refetching a
block of data that you're still in, even if you've moved slightly
farther in it because you're skipping the next instruction due to an
annulled branch delay slot. In reality however, in SPARC, the one ISA
I'm aware of which has this sort of branching behavior, the PC state
object will correctly determine that no branch is happening in these
cases. Code lower down in the loop will then recompute where fetching
should continue based on the next PC, automatically skipping the
annulled branch slot without misinterpretting the gap as a branch.
This change therefore also removes this block of code.
Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c
Reviewed-on: https://gem5-review.googlesource.com/6821
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Now that translateFunctional is a virtual function, having an extra
parameter with a default value makes the compiler fall through to the
base implementation instead of overriding it. This change removes the
default value for the extra parameter, and adds a small wrapper with
the correct signature which overrides the base implementation and calls
the full version with the previously default value for the extra
parameter. To callers this will look like the same thing, but the
the right function will get called.
This was what was already being done for transateAtomic and
translateTiming.
Change-Id: I0b71adf34fd6f326005edbb8eaac93275b437c55
Reviewed-on: https://gem5-review.googlesource.com/7121
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
It's no longer used.
Change-Id: I4a71bcb214f1bb186b92ef50841eca635e6701c5
Reviewed-on: https://gem5-review.googlesource.com/6826
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.
This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.
The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.
A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.
Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes the WFx trapping behaviour by introducing the arm arm
v8 pseudocode functions: checkForWFxTrap32 and checkForWFxTrap64
Change-Id: I3db0d78b5c4ad46860e6d199c2f2fc7b41842840
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6622
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If undefined instruction has to be routed to EL2, the HSR register
must change the HSR.EC and HSR.ISS accordingly, which means not using
the EL1 exception syndrome, but the unknown reason one (EC=0, ISS=0)
Change-Id: I1540c713ab545bf307c1dad3ae305de4178443f4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6621
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The previously introduced method was missing the machInst value
to be masked.
Change-Id: Ic722f7cc2abc680da1a1f19c08299338b5c859a6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6881
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is introducing some methods in StaticInst so that is possible
to get the instruction size in byte of the instruction (can be 2 bytes
in Thumb) and the correct opcode (The machInst field contains some
appended metadata)
Change-Id: I3bed4d9fd7c77feaeded40ded192afe445d306ea
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6781
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Cosmetic fix: prefer static_cast rather than reinterpret_cast in
hierarchy.
Change-Id: Ic0e5a4df9b18072a6df5ee316f674241074c349a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6761
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Replace them with std::array<>s.
Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34
Reviewed-on: https://gem5-review.googlesource.com/6602
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch corrects the TPIDRURO and TPIDRURW access flags: TPIDRURO is
now readable in secure user mode, an TPIDRURW is readable and writable
in secure user mode.
Change-Id: I6293d9a3bcc7adc0f655bf98d29aca51eca5a002
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6381
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds support for decoding and executing the following ARMv8
cache maintenance instructions by Virtual Address:
* dc civac: Clean and Invalidate by Virtual Address to the Point
of Coherency
* dc cvac: Clean by Virtual Address to the Point of Coherency
* dc cvau: Clean by Virtual Address to the Point of Unification
* dc ivac: Invalidate by Virtual Addrsess to the Point of Coherency
Change-Id: I58cabda37f9636105fda1b1e84a0a04965fb5670
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5060
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds support for the ARMv7 cache maintenance
intructions:
* mcr dccmvac cleans a VA to the PoC
* mcr dcimvac invalidates a VA to the PoC
* mcr dccimvac cleans and invalidates a VA to the PoC
* mcr dccmvau cleans a VA to the PoU
Change-Id: I6511f203039ca145cc9128ddf61d09d6d7e40c10
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5059
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Cache Maintainance operations to the point of coherence are treated as
normal cahceable requests and clean and/or invalidate the caches of
all PEs.
Change-Id: Ia4a749c2318fe29c8601848b034b8315c4186c8a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5056
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Arm security extension introduced register banking between secure and
non-secure mode. This has been removed in armv8 using AArch64 in EL3,
where the decoded register is by default the non-secure version. Using
non-secure register infos(flags) was preventing secure execution to
access the register with the MRC/MCR at EL1.
The patch updates the following banked registers' flags so that their
non-secure version can be accessed in secure mode:
MISCREG_CSSELR, MISCREG_SCTLR, MISCREG_ACTLR, MISCREG_TTBR0,
MISCREG_TTBR1, MISCREG_TTBCR, MISCREG_DACR, MISCREG_DFSR, MISCREG_IFSR,
MISCREG_ADFSR, MISCREG_AIFSR, MISCREG_DFAR, MISCREG_IFAR, MISCREG_PAR,
MISCREG_PRRR, MISCREG_MAIR0, MISCREG_NMRR, MISCREG_MAIR1,
MISCREG_AMAIR0, MISCREG_AMAIR1, MISCREG_VBAR, MISCREG_CONTEXTIDR,
MISCREG_TPIDRURW, MISCREG_TPIDRURO, MISCREG_TPIDRPRW, MISCREG_CNTP_TVAL,
MISCREG_CNTP_CTL, MISCREG_CNTP_CVAL
For those registers the following permission bits have been set:
MISCREG_PRI_S_RD
MISCREG_PRI_S_WR
Change-Id: Ib881c526e75d69e313f8ef66eb78fc704de6bf59
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6201
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
