| Age | Commit message (Collapse) | Author |
|---|
|
Since EL2 is not available in secure mode, any HVC call from secure mode
should be treated as undefined. This behaviour was implemented in
aarch32 HVC but not in 64 bit version
Change-Id: Ibaa4d8b1e8fe01d2ba3ef07494c09a4d3e7e87b0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5921
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change the definition of PMU events in order to integrate events not
cannot easily be represented by probe points. The software
increment event is now defined as a special type with its separate
implementation in pmu.cc and pmu.hh.
Change-Id: I43874b9641bf38c54f6ba2c26386542b6a73e282
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5764
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I09531e9992e045254e5ee989dd11ccabbf84e4ce
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5763
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the Aarch32 MCR/MRC disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the coprocessor register name
Change-Id: I1937938c43680200cf6c5c9558e835ce2b209adc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5862
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the Aarch64 MSR/MRS disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the system register name
Change-Id: Iac9d5f2f2fea85abd9a398320ef7aa4844d43c0e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5861
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Events were not being attached to counters after a checkpoint resume.
By not storing the enable private variable from the stored state the
recreation of the event to counter association is automatically carried.
The enable state is stored in the reg_pmcnten.
Change-Id: I46344df0882a9050c900efb2e8996d64dbfbf297
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When ignoring writes to the Dummy ISA device (DummyISADevice),
additionally print the value being ignored in the diagnostic.
Sometimes it is useful to know exactly what we are dropping ...
Change-Id: I9a01623611f0da0aa12b065fbb2031aa27e2c036
Signed-off-by: Sean McGoogan <Sean.McGoogan@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5731
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
DSB Instruction shouldn't flush the pipeline, hence the IsSquashAfter
attribute will be removed for either the 32 and 64 bit version.
Change-Id: I98b2b8bc78aa28445ed1a9b5f34645f8d71616ad
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5363
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Writes to DCCMVAC (Data Cache line Clean by VA to PoC) system register
shouldn't flush the pipeline as a result of the operation. This addition
was wrongly introduced for supporting self-modifying code. Software
barriers should be used instead.
Change-Id: Idf0c27d2e49ca01be19888ae5523b8f8eaefa7b3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5362
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This Patch is removing the FlushPipe ArmFault, which was used for
flushing the pipeline in favour of the general IsSquashAfter StaticInstr
flag. Using a fault was preventing tracers from tracing barriers like
ISB and from adding them to the instruction count
Change-Id: I176e9254eca904694f2f611eb486c55e50ec61ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5361
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch introduces the ARM A32/T32/A64 CRC Instructions, which are
mandatory since ARMv8.1. The UNPREDICTABLE behaviours are implemented as
follows:
1) CRC32(C)X (64 bit) instructions are decoded as Undefined in Aarch32
2) The instructions support predication in Aarch32
3) Using R15(PC) as source/dest operand is permitted in Aarch32
Change-Id: Iaf29b05874e1370c7615da79a07f111ded17b6cc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5521
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8 Tracers might want to be able to read the intWidth field of the
ArmStaticInst object. The field is specifying the bit width of the
integer registers used by the current instruction.
Change-Id: Iaee3123823a2c7380917001c453377c1c12e54a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch corrects the encoding of the HVC (Hypervisor Call) for the
T32 instruction set.
Change-Id: I6f77eaf5c586697e9ccd588419c61e6d90c6c7bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5541
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
A program running in EL0 is allowed to execute CMOs when the UCI bit
in SCTLR is set. The execution of dc ivac, however, would fault
uncoditionally when executed from EL0. This change aligns the
permission checks for dc ivac with the rest of the CMOs.
Change-Id: I1a532f37707c7dc0748b4375252c6ec0bbf95419
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5058
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.
Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.
Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.
Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The high speed bit-reversing function is now used
for the Aarch64/32 RBIT instruction implementation.
Change-Id: Id5a8a93d928d00fd33ec4061fbb586b8420a1c1b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5262
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Generating dependency/build product information in the isa parser breaks scons
idea of how a build is supposed to work. Arm twisting it into working forced
a lot of false dependencies which slowed down the build.
Change-Id: Iadee8c930fd7c80136d200d69870df7672a6b3ca
Reviewed-on: https://gem5-review.googlesource.com/5081
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: Ided438af19c9b8504d4624119c4d9fb5157c7cf0
Reviewed-on: https://gem5-review.googlesource.com/4720
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When a store exclusive is executed, whether it is successful or not,
the exclusives monitor is cleared and therefore we need to signal an
event for the PE.
Change-Id: I383c88c769c0ac5f5d36c4b5d39c9681134d3a20
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4480
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARM systems require the coordination of the global and local
monitors. When the system is run without caches the global monitor is
implemented in the abstract memory object. This change adds a callback
from the abstract memory that notifies the local monitor when the
global monitor is cleared.
Additionally, for ARM systems the local monitor signals the event
register and wakes the thread context up. Subsequent wait-for-event
(WFE) instructions will be immediately signaled.
Change-Id: If6c038f3a6bea7239ba4258f07f39c7f9a30500b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3760
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The MuxingKvmGic class defined a few functions related to checkpointing which
did nothing other than call the underlying Pl390 implementation. These are
unnecessary in general, and are particularly unnecessary for the loadState
function which is a very lightly used part of the checkpointing interface.
It's not actually defined in Pl390 either, and falls through to the
underlying implementation.
Change-Id: I84aae13d4966df0f4fdd1a72aee0bf1af01392ff
Reviewed-on: https://gem5-review.googlesource.com/4760
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The kernel stat mechanism should really be refactored and moved somewhere
else, but in the mean time there's some old cruft that can be cleared away.
Change-Id: I21e725de590dda0d20bf3bc675bbe976c7b1bd86
Reviewed-on: https://gem5-review.googlesource.com/4600
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When writing a bitmask of counters to PMSWINC, the PMU currently
increments the corresponding counters regardless of what they are
configured to count. According to the ARM ARM (D5.10.4), counters
should only be updated if they have been configured to count
software events (event type 0).
Change-Id: I5b2bc1fae55faa342b863721c9838342442831a9
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4285
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I94a4bf4a633aeed550f8c01ccae824add3b85eb0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4284
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
Change-Id: I544519c4f87e50cc02af29cbb3edc31ecf726e8e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4263
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
ISA devices typically run in the device event queue. Previously, we
assumed that devices would perform their own EQ migrations as
needed. This isn't ideal since it means we have different conventions
for IO devices and ISA devices. Switch to doing migrations in the KVM
CPU instead to make the behavior consistent.
Change-Id: I33b74480fb2126b0786dbdbfdcfa86083384250c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4288
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Old ARM systems used to pass the machine type in the ATAGS list passed
to the kernel. This has been largely deprecated by the introduction of
device trees. Switch to the DTOnly machine type by default in gem5
since all new platforms and kernel will require this behavior.
Change-Id: Icfd085e4862863b4ef495566bfddbd11591866c3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4260
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The LDM instruction that loads to the PC causes a branch to the
instruction. In ARMv5T+ the branch can interswitch Thumb and ARM modes.
The interswitch is broken prior to this commit, with LDM to the PC
ignoring the switch.
Change-Id: I6aad073206743f3435c9923e3e2218bfe32c7e05
Reviewed-on: https://gem5-review.googlesource.com/3520
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8.1 added a second architected event range, 0x4000-0x4040. Events
in this range are discovered using the high word of PMCEID{0,1}_EL0
Change-Id: I4cd01264230e5da4c841268a7cf3e6bd307c7180
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3960
|
|
If an interrupt was pending according to Kvm state during a drain,
the Pl390 model would create an interrupt event that could not be
serviced, preventing the system from draining. The proper behavior
is for the Pl390 not actively being used for simulation to just skip
the GIC state machine that delivers interrupts.
Change-Id: Icb37e7e992f1fb441a9b3a26daa1bb5a6fe19228
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The BaseArmKvmCPU is responsible for forwarding the IRQ and FIQ
signals from gem5's simulated GIC to KVM. However, these signals
shouldn't be used when the in-kernel GIC emulator is used.
Instead of delivering the interrupts to the guest, we should just
ignore them since any such pending interrupts are likely to be an
artifact of CPU switching or incorrect draining.
Change-Id: I083b72639384272157f92f44a6606bdf0be7413c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3660
|
|
Reiley's update :) of the isa parser definitions. My addition of the
vector element operand concept for the ISA parser. Nathanael's modification
creating a hierarchy between vector registers and its constituencies to the
isa parser.
Some fixes/updates on top to consider instructions as vectors instead of
floating when they use the VectorRF. Some counters added to all the
models to keep faithful counts.
Change-Id: Id8f162a525240dfd7ba884c5a4d9fa69f4050101
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2706
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.
This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.
This requires implementing the vector register file for the different
models using the VecRegContainer class.
This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.
The changes also affect how the remote_gdb connection works.
There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.
Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.
Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705
|
|
With the hierarchical RegId there are a lot of functions that are
redundant now.
The idea behind the simplification is that instead of having the regId,
telling which kind of register read/write/rename/lookup/etc. and then
the function panic_if'ing if the regId is not of the appropriate type,
we provide an interface that decides what kind of register to read
depending on the register type of the given regId.
Change-Id: I7d52e9e21fc01205ae365d86921a4ceb67a57178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2702
|
|
Replace the unified register mapping with a structure associating
a class and an index. It is now much easier to know which class of
register the index is referring to. Also, when adding a new class
there is no need to modify existing ones.
Change-Id: I55b3ac80763702aa2cd3ed2cbff0a75ef7620373
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2700
|
|
The ARM MiscRegs implementation has two interfaces: 'normal'
and 'no effect'. The latter acts as a way to access the
backing store without architectural 'effects'. For instance,
a normal write to a timer compare value would call into the
timer model to emulate the device. The 'no effect' interface,
however, would just write the value into the register backing
store and do nothing else.
For Kvm execution, a delicate balance must be struck for the
timer device specifically. We need the code in the model
to be run, because it contains state other than the register
backing store that must stay in sync. On the other hand, we
don't necessarily want the timer model to schedule gem5
events when this happens.
In this commit, we ensure that we use the 'effectful'
MiscReg interface when copying the CP15 timer registers
from Kvm back into gem5. The prior commit makes sure
that this doesn't generate unnecessary timer events
or interrupts.
Change-Id: Id414c2965bd07fc21ac95e3d581ccc9f55cef9f9
Reviewed-on: https://gem5-review.googlesource.com/3543
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The check was nearly completely generic anyway,
with the exception of the Kvm CPU type.
This will make it easier for other parts of the
codebase to do similar checks.
Change-Id: Ibfdd3d65e9e6cc3041b53b73adfabee1999283da
Reviewed-on: https://gem5-review.googlesource.com/3540
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
32bit and 64bit Linux have different arguments passed to the
__switch_to() function that gem5 hooks into in order to collect context
switch statistics. 64bit Linux provides the task_struct pointer to the
next task that will be switched to, which means we don't have to look
up the task_struct from thread_info as we do in 32bit ARM Linux.
This patch adds a second set of accessors to ThreadInfo to extract
details such as the pid, tgid, task name, etc., directly from a
task_struct. The existing accessors maintain their existing behavior by
first looking up the task_struct and then calling these new accessors.
A 64-bit variant of the DumpStatsPCEvent class is added that uses these
new accessors to get the task details for the context switch dumps
directly from the task_struct passed to __switch_to().
Change-Id: I63c4b3e1ad64446751a91f6340901d5180d7382d
Reviewed-on: https://gem5-review.googlesource.com/2640
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I08de5f72513645d1fe92bde99fa205dde897e951
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3747
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The PMU model currently doesn't calculate the PMU event counter index
correctly for writes to the PMEVTYPER[0-5]_EL0 registers. Fix this
obvious mistake.
Change-Id: I2913eedddeb98480660e2d63948f6d727adf5ab8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3121
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
The ISA code for ARM calculates min and max elements for types using
bit manipulation. That triggers some warnings, treated as errors, as
the compiler can tell that there is an overflow and the sign
flips. Fixed using standard lib definitions instead.
Change-Id: Ie2331b410c7f76d4bd87da5afe9edf20c8ac91b3
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3481
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Compiling gem5 with recent version of clang (4 and 5) triggers
warnings that are treated as errors:
* Global templatized static functions result in a warning if they
are not used. These should either be declared as static inline or
without the static identifier to avoid the warning.
* Some templatized classes contain static variables. The
instantiated versions of these variables / templates need to be
explicitly declared to avoid a compiler warning.
Change-Id: Ie8261144836e94ebab7ea04ccccb90927672c257
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3420
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.
Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The DumpStatsPCEventF is declared but lacks an implementation. This
confuses RTTI in clang. Remove this class since it is clearly not
needed.
Change-Id: Ib95f09f2ba8593f8d0e072b96afd5f8a9ed31070
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3240
Reviewed-by: B.A. Zeeb <baz21@cam.ac.uk>
|
|
Add support for a memory mapped m5op interface. When enabled, the TLB
intercepts accesses in the 64KiB region designated by the
ArmTLB.m5ops_base parameter. An access to this range maps to a
specific m5op call. The upper 8 bits of the offset into the range
denote the m5op function to call and the lower 8 bits denote the
subfunction.
Change-Id: I55fd8ac1afef4c3cc423b973870c9fe600a843a2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2964
|
|
The state transfer code wasn't reading back PSTATE correctly from the
CPU prior to updating the thread context and was incorreclty writing
the register as a 32-bit value when updating KVM. Correctly read back
the state before updating gem5's view of PSTATE and cast the value to
a uint64_t.
Change-Id: I0a6ff5b77b897c756b20a20f65c420f42386360f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2963
Reviewed-by: Rahul Thakur <rjthakur@google.com>
|
|
Use the PyBind11 wrapping infrastructure instead of SWIG to generate
wrappers for functionality that needs to be exported to Python. This
has several benefits:
* PyBind11 can be redistributed with gem5, which means that we have
full control of the version used. This avoid a large number of
hard-to-debug SWIG issues we have seen in the past.
* PyBind11 doesn't rely on a custom C++ parser, instead it relies on
wrappers being explicitly declared in C++. The leads to slightly
more boiler-plate code in manually created wrappers, but doesn't
doesn't increase the overall code size. A big benefit is that this
avoids strange compilation errors when SWIG doesn't understand
modern language features.
* Unlike SWIG, there is no risk that the wrapper code incorporates
incorrect type casts (this has happened on numerous occasions in
the past) since these will result in compile-time errors.
As a part of this change, the mechanism to define exported methods has
been redesigned slightly. New methods can be exported either by
declaring them in the SimObject declaration and decorating them with
the cxxMethod decorator or by adding an instance of
PyBindMethod/PyBindProperty to the cxx_exports class variable. The
decorator has the added benefit of making it possible to add a
docstring and naming the method's parameters.
The new wrappers have the following known issues:
* Global events can't be memory managed correctly. This was the
case in SWIG as well.
Change-Id: I88c5a95b6cf6c32fa9e1ad31dfc08b2e8199a763
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Andrew Bardsley <andrew.bardsley@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2231
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This also allows checkpointing of a Kvm GIC via the Pl390 model.
Change-Id: Ic85d81cfefad630617491b732398f5e6a5f34c0b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2444
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
