| Age | Commit message (Collapse) | Author |
|---|
|
Add a third register class for condition codes,
in parallel with the integer and FP classes.
No ISAs use the CC class at this point though.
|
|
Make these names more meaningful.
Specifically, made these substitutions:
s/FP_Base_DepTag/FP_Reg_Base/g;
s/Ctrl_Base_DepTag/Misc_Reg_Base/g;
s/Max_DepTag/Max_Reg_Index/g;
|
|
This patch is meant for allowing predicated reads and writes. Note that this
predication is different from the ISA provided predication. They way we
currently provide the ISA description for X86, we read/write registers that
do not need to be actually read/written. This is likely to be true for other
ISAs as well. This patch allows for read and write predicates to be associated
with operands. It allows for the register indices for source and destination
registers to be decided at the time when the microop is constructed. The
run time indicies come in to play only when the at least one of the
predicates has been provided. This patch will not affect any of the ISAs that
do not provide these predicates. Also the patch assumes that the order in
which operands appear in any function of the microop is same across all the
functions of the microops. A subsequent patch will enable predication for the
x86 ISA.
|
|
DynInst is extremely large the hope is that this re-organization will put the
most used members close to each other.
|
|
|
|
By using an underscore, the "." is still available and can unambiguously be
used to refer to members of a structure if an operand is a structure, class,
etc. This change mostly just replaces the appropriate "."s with "_"s, but
there were also a few places where the ISA descriptions where handling the
extensions themselves and had their own regular expressions to update. The
regular expressions in the isa parser were updated as well. It also now
looks for one of the defined type extensions specifically after connecting "_"
where before it would look for any sequence of characters after a "."
following an operand name and try to use it as the extension. This helps to
disambiguate cases where a "_" may legitimately be part of an operand name but
not separate the name from the type suffix.
Because leaving the "_" and suffix on the variable name still leaves a valid
C++ identifier and all extensions need to be consistent in a given context, I
considered leaving them on as a breadcrumb that would show what the intended
type was for that operand. Unfortunately the operands can be referred to in
code templates, the Mem operand in particular, and since the exact type of Mem
can be different for different uses of the same template, that broke things.
|
|
|
|
Comments should not be scanned for operands, and we should look for both /* */
style and // style.
|
|
|
|
This makes it possible to use the grammar multiple times and use the multiple
instances concurrently. This makes implementing an include statement as part
of a grammar possible.
|
|
|
|
This change simplifies the code surrounding operand type handling and makes it
depend only on the ctype that goes with each operand type. Future changes will
allow defining operand types by their ctypes directly, convert the ISAs over
to that style of definition, and then remove support for the old style. These
changes are to make it easier to use non-builtin types like classes or
structures as the type for operands.
|
|
The regular expressions matching filenames in the ##include directives and the
internally generated ##newfile directives where only looking for filenames
composed of alpha numeric characters, periods, and dashes. In Unix/Linux, the
rules for what characters can be in a filename are much looser than that. This
change replaces those expressions with ones that look for anything other than
a quote character. Technically quote characters are allowed as well so we
should allow escaping them somehow, but the additional complexity probably
isn't worth it.
|
|
|
|
I like the brevity of Ali's recent change, but the ambiguity of
sometimes showing the source and sometimes the target is a little
confusing. This patch makes scons typically list all sources and
all targets for each action, with the common path prefix factored
out for brevity. It's a little more verbose now but also more
informative.
Somehow Ali talked me into adding colors too, which is a whole
'nother story.
|
|
|
|
|
|
This change is a low level and pervasive reorganization of how PCs are managed
in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about,
the PC and the NPC, and the lsb of the PC signaled whether or not you were in
PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next
micropc, x86 and ARM introduced variable length instruction sets, and ARM
started to keep track of mode bits in the PC. Each CPU model handled PCs in
its own custom way that needed to be updated individually to handle the new
dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack,
the complexity could be hidden in the ISA at the ISA implementation's expense.
Areas like the branch predictor hadn't been updated to handle branch delay
slots or micropcs, and it turns out that had introduced a significant (10s of
percent) performance bug in SPARC and to a lesser extend MIPS. Rather than
perpetuate the problem by reworking O3 again to handle the PC features needed
by x86, this change was introduced to rework PC handling in a more modular,
transparent, and hopefully efficient way.
PC type:
Rather than having the superset of all possible elements of PC state declared
in each of the CPU models, each ISA defines its own PCState type which has
exactly the elements it needs. A cross product of canned PCState classes are
defined in the new "generic" ISA directory for ISAs with/without delay slots
and microcode. These are either typedef-ed or subclassed by each ISA. To read
or write this structure through a *Context, you use the new pcState() accessor
which reads or writes depending on whether it has an argument. If you just
want the address of the current or next instruction or the current micro PC,
you can get those through read-only accessors on either the PCState type or
the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the
move away from readPC. That name is ambiguous since it's not clear whether or
not it should be the actual address to fetch from, or if it should have extra
bits in it like the PAL mode bit. Each class is free to define its own
functions to get at whatever values it needs however it needs to to be used in
ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the
PC and into a separate field like ARM.
These types can be reset to a particular pc (where npc = pc +
sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as
appropriate), printed, serialized, and compared. There is a branching()
function which encapsulates code in the CPU models that checked if an
instruction branched or not. Exactly what that means in the context of branch
delay slots which can skip an instruction when not taken is ambiguous, and
ideally this function and its uses can be eliminated. PCStates also generally
know how to advance themselves in various ways depending on if they point at
an instruction, a microop, or the last microop of a macroop. More on that
later.
Ideally, accessing all the PCs at once when setting them will improve
performance of M5 even though more data needs to be moved around. This is
because often all the PCs need to be manipulated together, and by getting them
all at once you avoid multiple function calls. Also, the PCs of a particular
thread will have spatial locality in the cache. Previously they were grouped
by element in arrays which spread out accesses.
Advancing the PC:
The PCs were previously managed entirely by the CPU which had to know about PC
semantics, try to figure out which dimension to increment the PC in, what to
set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction
with the PC type itself. Because most of the information about how to
increment the PC (mainly what type of instruction it refers to) is contained
in the instruction object, a new advancePC virtual function was added to the
StaticInst class. Subclasses provide an implementation that moves around the
right element of the PC with a minimal amount of decision making. In ISAs like
Alpha, the instructions always simply assign NPC to PC without having to worry
about micropcs, nnpcs, etc. The added cost of a virtual function call should
be outweighed by not having to figure out as much about what to do with the
PCs and mucking around with the extra elements.
One drawback of making the StaticInsts advance the PC is that you have to
actually have one to advance the PC. This would, superficially, seem to
require decoding an instruction before fetch could advance. This is, as far as
I can tell, realistic. fetch would advance through memory addresses, not PCs,
perhaps predicting new memory addresses using existing ones. More
sophisticated decisions about control flow would be made later on, after the
instruction was decoded, and handed back to fetch. If branching needs to
happen, some amount of decoding needs to happen to see that it's a branch,
what the target is, etc. This could get a little more complicated if that gets
done by the predecoder, but I'm choosing to ignore that for now.
Variable length instructions:
To handle variable length instructions in x86 and ARM, the predecoder now
takes in the current PC by reference to the getExtMachInst function. It can
modify the PC however it needs to (by setting NPC to be the PC + instruction
length, for instance). This could be improved since the CPU doesn't know if
the PC was modified and always has to write it back.
ISA parser:
To support the new API, all PC related operand types were removed from the
parser and replaced with a PCState type. There are two warts on this
implementation. First, as with all the other operand types, the PCState still
has to have a valid operand type even though it doesn't use it. Second, using
syntax like PCS.npc(target) doesn't work for two reasons, this looks like the
syntax for operand type overriding, and the parser can't figure out if you're
reading or writing. Instructions that use the PCS operand (which I've
consistently called it) need to first read it into a local variable,
manipulate it, and then write it back out.
Return address stack:
The return address stack needed a little extra help because, in the presence
of branch delay slots, it has to merge together elements of the return PC and
the call PC. To handle that, a buildRetPC utility function was added. There
are basically only two versions in all the ISAs, but it didn't seem short
enough to put into the generic ISA directory. Also, the branch predictor code
in O3 and InOrder were adjusted so that they always store the PC of the actual
call instruction in the RAS, not the next PC. If the call instruction is a
microop, the next PC refers to the next microop in the same macroop which is
probably not desirable. The buildRetPC function advances the PC intelligently
to the next macroop (in an ISA specific way) so that that case works.
Change in stats:
There were no change in stats except in MIPS and SPARC in the O3 model. MIPS
runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could
likely be improved further by setting call/return instruction flags and taking
advantage of the RAS.
TODO:
Add != operators to the PCState classes, defined trivially to be !(a==b).
Smooth out places where PCs are split apart, passed around, and put back
together later. I think this might happen in SPARC's fault code. Add ISA
specific constructors that allow setting PC elements without calling a bunch
of accessors. Try to eliminate the need for the branching() function. Factor
out Alpha's PAL mode pc bit into a separate flag field, and eliminate places
where it's blindly masked out or tested in the PC.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This allows us to get tracebacks in certain cases where they're more
useful than our error message.
|
|
This allows the error to propagate more easily
|
|
|
|
|
|
|
|
|
|
In the isa_parser, we need to check case statements.
|
|
This adds support for the 32-bit, big endian Power ISA. This supports both
integer and floating point instructions based on the Power ISA Book I v2.06.
|
|
This is to prepare for future cleanup where we allow SCons to create a
separate grammar class for each ISA
|
|
|
|
|
|
A separate operand type is not necessary to use two bitfields to generate the
index.
|
|
|
|
|
|
|
|
should configure their editors to not insert tabs
|
|
"setShadowSet", "CacheOp"
--HG--
extra : convert_revision : a9ae8a7e62c27c2db16fd3cfa7a7f0bf5f0bf8ea
|
|
--HG--
extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
|
|
Also some touch up for ruflag.
--HG--
extra : convert_revision : 829947169af25ca6573f53b9430707101c75cc23
|
|
--HG--
extra : convert_revision : 4c046493b98ce4a766c2121710d70650cb6a801e
|
|
ControlBitfieldOPerand to ISA Parser. Now, while things do build, we have to fix broken functionality...
src/arch/isa_parser.py:
add back deleted writeback in Control Operand
--HG--
extra : convert_revision : dba11af220a1281fa53f79d87e4f8752bdfc56db
|
|
--HG--
extra : convert_revision : 31e7243c8820cb9f6744c53c417460dee9adaf44
|
|
into doughnut.mwconnections.com:/home/gblack/m5/newmem-x86
--HG--
extra : convert_revision : 276d00a73b1834d5262129c3f7e0f7fae18e23bc
|
|
generated.
--HG--
extra : convert_revision : e751969973599cde711f9d4de0dc4772dda651ed
|
|
ext/ply/ply/lex.py:
ext/ply/ply/yacc.py:
ext/ply/CHANGES:
ext/ply/README:
ext/ply/TODO:
ext/ply/doc/ply.html:
ext/ply/example/ansic/clex.py:
ext/ply/example/ansic/cparse.py:
ext/ply/example/calc/calc.py:
ext/ply/example/hedit/hedit.py:
ext/ply/example/optcalc/calc.py:
ext/ply/test/README:
ext/ply/test/calclex.py:
ext/ply/test/lex_doc1.exp:
ext/ply/test/lex_doc1.py:
ext/ply/test/lex_dup1.exp:
ext/ply/test/lex_dup1.py:
ext/ply/test/lex_dup2.exp:
ext/ply/test/lex_dup2.py:
ext/ply/test/lex_dup3.exp:
ext/ply/test/lex_dup3.py:
ext/ply/test/lex_empty.py:
ext/ply/test/lex_error1.py:
ext/ply/test/lex_error2.py:
ext/ply/test/lex_error3.exp:
ext/ply/test/lex_error3.py:
ext/ply/test/lex_error4.exp:
ext/ply/test/lex_error4.py:
ext/ply/test/lex_hedit.exp:
ext/ply/test/lex_hedit.py:
ext/ply/test/lex_ignore.exp:
ext/ply/test/lex_ignore.py:
ext/ply/test/lex_re1.exp:
ext/ply/test/lex_re1.py:
ext/ply/test/lex_rule1.py:
ext/ply/test/lex_token1.py:
ext/ply/test/lex_token2.py:
ext/ply/test/lex_token3.py:
ext/ply/test/lex_token4.py:
ext/ply/test/lex_token5.exp:
ext/ply/test/lex_token5.py:
ext/ply/test/yacc_badargs.exp:
ext/ply/test/yacc_badargs.py:
ext/ply/test/yacc_badprec.exp:
ext/ply/test/yacc_badprec.py:
ext/ply/test/yacc_badprec2.exp:
ext/ply/test/yacc_badprec2.py:
ext/ply/test/yacc_badrule.exp:
ext/ply/test/yacc_badrule.py:
ext/ply/test/yacc_badtok.exp:
ext/ply/test/yacc_badtok.py:
ext/ply/test/yacc_dup.exp:
ext/ply/test/yacc_dup.py:
ext/ply/test/yacc_error1.exp:
ext/ply/test/yacc_error1.py:
ext/ply/test/yacc_error2.exp:
ext/ply/test/yacc_error2.py:
ext/ply/test/yacc_error3.exp:
ext/ply/test/yacc_error3.py:
ext/ply/test/yacc_inf.exp:
ext/ply/test/yacc_inf.py:
ext/ply/test/yacc_missing1.exp:
ext/ply/test/yacc_missing1.py:
ext/ply/test/yacc_nodoc.exp:
ext/ply/test/yacc_nodoc.py:
ext/ply/test/yacc_noerror.exp:
ext/ply/test/yacc_noerror.py:
ext/ply/test/yacc_nop.exp:
ext/ply/test/yacc_nop.py:
ext/ply/test/yacc_notfunc.exp:
ext/ply/test/yacc_notfunc.py:
ext/ply/test/yacc_notok.exp:
ext/ply/test/yacc_notok.py:
ext/ply/test/yacc_rr.exp:
ext/ply/test/yacc_rr.py:
ext/ply/test/yacc_simple.exp:
ext/ply/test/yacc_simple.py:
ext/ply/test/yacc_sr.exp:
ext/ply/test/yacc_sr.py:
ext/ply/test/yacc_term1.exp:
ext/ply/test/yacc_term1.py:
ext/ply/test/yacc_unused.exp:
ext/ply/test/yacc_unused.py:
ext/ply/test/yacc_uprec.exp:
ext/ply/test/yacc_uprec.py:
Import patch ply.diff
src/arch/isa_parser.py:
everything is now within the ply package
--HG--
rename : ext/ply/lex.py => ext/ply/ply/lex.py
rename : ext/ply/yacc.py => ext/ply/ply/yacc.py
extra : convert_revision : fca8deabd5c095bdeabd52a1f236ae1404ef106e
|
|
substitution.
--HG--
extra : convert_revision : ba398e1b434efda28882f159d5a4419302276371
|
