summaryrefslogtreecommitdiff
path: root/src/arch/mips/utility.cc
AgeCommit message (Collapse)Author
2017-12-04misc: Rename misc.(hh|cc) to logging.(hh|cc)Gabe Black
These files aren't a collection of miscellaneous stuff, they're the definition of the Logger interface, and a few utility macros for calling into that interface (panic, warn, etc.). Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1 Reviewed-on: https://gem5-review.googlesource.com/6226 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2016-11-09style: [patch 1/22] use /r/3648/ to reorganize includesBrandon Potter
2015-07-28revert 5af8f40d8f2cNilay Vaish
2015-07-26cpu: implements vector registersNilay Vaish
This adds a vector register type. The type is defined as a std::array of a fixed number of uint64_ts. The isa_parser.py has been modified to parse vector register operands and generate the required code. Different cpus have vector register files now.
2014-09-20alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivateMitch Hayenga
activate(), suspend(), and halt() used on thread contexts had an optional delay parameter. However this parameter was often ignored. Also, when used, the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were ever specified). This patch removes the delay parameter and 'Events' associated with them across all ISAs and cores. Unused activate logic is also removed.
2014-03-01cpu: Enable fast-forwarding for MIPS InOrderCPU and O3CPUChristopher Torng
A copyRegs() function is added to MIPS utilities to copy architectural state from the old CPU to the new CPU during fast-forwarding. This addition alone enables fast-forwarding for the o3 cpu model running MIPS. The patch also adds takeOverFrom() and drainResume() functions to the InOrderCPU to enable it to take over from another CPU. This change enables fast-forwarding for the inorder cpu model running MIPS, but not for Alpha. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-10-30SE/FS: Get rid of FULL_SYSTEM in MIPS.Gabe Black
2011-04-15includes: sort all includesNathan Binkert
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-10-15GetArgument: Rework getArgument so that X86_FS compiles again.Gabe Black
When no size is specified for an argument, push the decision about what size to use into the ISA by passing a size of -1.
2010-10-01Debug: Implement getArgument() and function skipping for ARM.Ali Saidi
In the process make add skipFuction() to handle isa specific function skipping instead of ifdefs and other ugliness. For almost all ABIs, 64 bit arguments can only start in even registers. Size is now passed to getArgument() so that 32 bit systems can make decisions about register selection for 64 bit arguments. The number argument is now passed by reference because getArgument() will need to change it based on the size of the argument and the current argument number. For ARM, if the argument number is odd and a 64-bit register is requested the number must first be incremented to because all 64 bit arguments are passed in an even argument register. Then the number will be incremented again to access both halves of the argument.
2010-09-13Faults: Pass the StaticInst involved, if any, to a Fault's invoke method.Gabe Black
Also move the "Fault" reference counted pointer type into a separate file, sim/fault.hh. It would be better to name this less similarly to sim/faults.hh to reduce confusion, but fault.hh matches the name of the type. We could change Fault to FaultPtr to match other pointer types, and then changing the name of the file would make more sense.
2009-07-21MIPS: Get MIPS_FS to compile, more style fixes.Gabe Black
Some breakage was from my BitUnion change, some was much older.
2009-07-08Registers: Add a registers.hh file as an ISA switched header.Gabe Black
This file is for register indices, Num* constants, and register types. copyRegs and copyMiscRegs were moved to utility.hh and utility.cc. --HG-- rename : src/arch/alpha/regfile.hh => src/arch/alpha/registers.hh rename : src/arch/arm/regfile.hh => src/arch/arm/registers.hh rename : src/arch/mips/regfile.hh => src/arch/mips/registers.hh rename : src/arch/sparc/regfile.hh => src/arch/sparc/registers.hh rename : src/arch/x86/regfile.hh => src/arch/x86/registers.hh
2008-11-04get rid of all instances of readTid() and getThreadNum(). Unify and eliminateLisa Hsu
redundancies with threadId() as their replacement.
2008-09-27gcc: Add extra parens to quell warnings.Nathan Binkert
Even though we're not incorrect about operator precedence, let's add some parens in some particularly confusing places to placate GCC 4.3 so that we don't have to turn the warning off. Agreed that this is a bit of a pain for those users who get the order of operations correct, but it is likely to prevent bugs in certain cases.
2008-07-01Remove delVirtPort() and make getVirtPort() only return cached version.Ali Saidi
2008-07-01Change everything to use the cached virtPort rather than created their own ↵Ali Saidi
each time. This appears to work, but I don't want to commit it until it gets tested a lot more. I haven't deleted the functionality in this patch that will come later, but one question is how to enforce encourage objects that call getVirtPort() to not cache the virtual port since if the CPU changes out from under them it will be worse than useless. Perhaps a null function like delVirtPort() is still useful in that case.
2007-11-15fix MIPS headersKorey Sewell
--HG-- extra : convert_revision : 2870a146a1be0e8c80878090f39c0eaa15d2eb13
2007-11-13Add in files from merge-bare-iron, get them compiling in FS and SE modeKorey Sewell
--HG-- extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-06-22mips import pt. 1Korey Sewell
src/arch/mips/SConscript: "mips import pt.1". --HG-- extra : convert_revision : 2e393341938bebf32fb638a209262d074fad4cc1
2006-08-15Cleaned up include files and got rid of many using directives in header files.Gabe Black
--HG-- extra : convert_revision : 6b11e039cbc061dab75195fa1aebe6ca2cdc6f91
2006-06-09Authorship stuffKorey Sewell
--HG-- extra : convert_revision : 10c894365fa93eeb44528c29358ad73342f86902
2006-06-09Merging in a month of changesKorey Sewell
src/arch/isa_parser.py: Sign extend bit if you read int reg that is greater than default size src/arch/mips/SConscript: src/arch/mips/faults.cc: src/arch/mips/faults.hh: src/arch/mips/isa/base.isa: src/arch/mips/isa/bitfields.isa: src/arch/mips/isa/decoder.isa: src/arch/mips/isa/formats/basic.isa: src/arch/mips/isa/formats/branch.isa: src/arch/mips/isa/formats/formats.isa: src/arch/mips/isa/formats/fp.isa: src/arch/mips/isa/formats/int.isa: src/arch/mips/isa/formats/mem.isa: src/arch/mips/isa/formats/noop.isa: src/arch/mips/isa/formats/tlbop.isa: src/arch/mips/isa/formats/trap.isa: src/arch/mips/isa/formats/unimp.isa: src/arch/mips/isa/formats/unknown.isa: src/arch/mips/isa/formats/util.isa: src/arch/mips/isa/includes.isa: src/arch/mips/isa/main.isa: src/arch/mips/isa/operands.isa: src/arch/mips/isa_traits.cc: src/arch/mips/linux/process.cc: src/arch/mips/linux/process.hh: src/arch/mips/process.cc: src/arch/mips/process.hh: src/arch/mips/regfile/float_regfile.hh: src/arch/mips/utility.hh: 1 month of changes! src/arch/mips/isa/formats/control.isa: control formats src/arch/mips/isa/formats/mt.isa: mips mt format src/arch/mips/utility.cc: utility functions --HG-- extra : convert_revision : c1332cb5ce08b464b99fbf04f4a5cac312898784