summaryrefslogtreecommitdiff
path: root/src/arch/power
AgeCommit message (Collapse)Author
2011-04-04ARM: Cleanup implementation of ITSTATE and put important code in PCState.Ali Saidi
Consolidate all code to handle ITSTATE in the PCState object rather than touching a variety of structures/objects.
2011-03-29Power: Fix compilation.Gabe Black
2011-03-26mips: cleanup ISA-specific codeKorey Sewell
*** (1): get rid of expandForMT function MIPS is the only ISA that cares about having a piece of ISA state integrate multiple threads so add constants for MIPS and relieve the other ISAs from having to define this. Also, InOrder was the only core that was actively calling this function * * * (2): get rid of corespecific type The CoreSpecific type was used as a proxy to pass in HW specific params to a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense to not force every other ISA to use CoreSpecific as well use a special reset function to set it. That probably should go in a PowerOn reset fault anyway.
2011-03-17O3: Send instruction back to fetch on squash to seed predecoder correctly.Ali Saidi
2011-03-01Spelling: Fix the a spelling error by changing mmaped to mmapped.Gabe Black
There may not be a formally correct spelling for the past tense of mmap, but mmapped is the spelling Google doesn't try to autocorrect. This makes sense because it mirrors the past tense of map->mapped and not the past tense of cape->caped. --HG-- rename : src/arch/alpha/mmaped_ipr.hh => src/arch/alpha/mmapped_ipr.hh rename : src/arch/arm/mmaped_ipr.hh => src/arch/arm/mmapped_ipr.hh rename : src/arch/mips/mmaped_ipr.hh => src/arch/mips/mmapped_ipr.hh rename : src/arch/power/mmaped_ipr.hh => src/arch/power/mmapped_ipr.hh rename : src/arch/sparc/mmaped_ipr.hh => src/arch/sparc/mmapped_ipr.hh rename : src/arch/x86/mmaped_ipr.hh => src/arch/x86/mmapped_ipr.hh
2011-02-03Fault: Rename sim/fault.hh to fault_fwd.hh to distinguish it from faults.hh.Gabe Black
--HG-- rename : src/sim/fault.hh => src/sim/fault_fwd.hh
2011-01-03Make commenting on close namespace brackets consistent.Steve Reinhardt
Ran all the source files through 'perl -pi' with this script: s|\s*(};?\s*)?/\*\s*(end\s*)?namespace\s*(\S+)\s*\*/(\s*})?|} // namespace $3|; s|\s*};?\s*//\s*(end\s*)?namespace\s*(\S+)\s*|} // namespace $2\n|; s|\s*};?\s*//\s*(\S+)\s*namespace\s*|} // namespace $1\n|; Also did a little manual editing on some of the arch/*/isa_traits.hh files and src/SConscript.
2010-12-08POWER: Take advantage of new PCState syntax.Gabe Black
2010-11-15O3: Make O3 support variably lengthed instructions.Gabe Black
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-10-22ISA: Simplify various implementations of completeAcc.Gabe Black
2010-10-01Power: Fix compile error from previous push.Ali Saidi
2010-10-01Debug: Implement getArgument() and function skipping for ARM.Ali Saidi
In the process make add skipFuction() to handle isa specific function skipping instead of ifdefs and other ugliness. For almost all ABIs, 64 bit arguments can only start in even registers. Size is now passed to getArgument() so that 32 bit systems can make decisions about register selection for 64 bit arguments. The number argument is now passed by reference because getArgument() will need to change it based on the size of the argument and the current argument number. For ARM, if the argument number is odd and a 64-bit register is requested the number must first be incremented to because all 64 bit arguments are passed in an even argument register. Then the number will be incremented again to access both halves of the argument.
2010-09-14CPU: Trim unnecessary includes from some common files.Gabe Black
This reduces the scope of those includes and makes it less likely for there to be a dependency loop. This also moves the hashing functions associated with ExtMachInst objects to be with the ExtMachInst definitions and out of utility.hh.
2010-09-13Faults: Pass the StaticInst involved, if any, to a Fault's invoke method.Gabe Black
Also move the "Fault" reference counted pointer type into a separate file, sim/fault.hh. It would be better to name this less similarly to sim/faults.hh to reduce confusion, but fault.hh matches the name of the type. We could change Fault to FaultPtr to match other pointer types, and then changing the name of the file would make more sense.
2010-09-10style: fix sorting of includes and whitespace in some filesNathan Binkert
2010-08-25ARM: Fixed register flattening logic (FP_Base_DepTag was set too low)Min Kyu Jeong
When decoding a srs instruction, invalid mode encoding returns invalid instruction. This can happen when garbage instructions are fetched from mispredicted path
2010-08-23Power: Get rid of unused checkFpEnableFault.Gabe Black
This function was brought in from another ISA and doesn't actually do anything or get used.
2010-08-23ISA: Get rid of old, unused utility functions cluttering up the ISAs.Gabe Black
2010-08-17sim: revamp unserialization procedureSteve Reinhardt
Replace direct call to unserialize() on each SimObject with a pair of calls for better control over initialization in both ckpt and non-ckpt cases. If restoring from a checkpoint, loadState(ckpt) is called on each SimObject. The default implementation simply calls unserialize() if there is a corresponding checkpoint section, so we get backward compatibility for existing objects. However, objects can override loadState() to get other behaviors, e.g., doing other programmed initializations after unserialize(), or complaining if no checkpoint section is found. (Note that the default warning for a missing checkpoint section is now gone.) If not restoring from a checkpoint, we call the new initState() method on each SimObject instead. This provides a hook for state initializations that are only required when *not* restoring from a checkpoint. Given this new framework, do some cleanup of LiveProcess subclasses and X86System, which were (in some cases) emulating initState() behavior in startup via a local flag or (in other cases) erroneously doing initializations in startup() that clobbered state loaded earlier by unserialize().
2010-07-22Power: The condition register should be set or cleared upon a system callTimothy M. Jones
return to indicate success or failure.
2010-07-22Power: Provide a utility function to copy registers from one thread contextTimothy M. Jones
to another in the Power ISA.
2010-06-15stats: only consider a formula initialized if there is a formulaNathan Binkert
2010-03-23cpu: fix exec tracing memory corruption bugSteve Reinhardt
Accessing traceData (to call setAddress() and/or setData()) after initiating a timing translation was causing crashes, since a failed translation could delete the traceData object before returning. It turns out that there was never a need to access traceData after initiating the translation, as the traced data was always available earlier; this ordering was merely historical. Furthermore, traceData->setAddress() and traceData->setData() were being called both from the CPU model and the ISA definition, often redundantly. This patch standardizes all setAddress and setData calls for memory instructions to be in the CPU models and not in the ISA definition. It also moves those calls above the translation calls to eliminate the crashes.
2010-02-12O3PCU: Split loads and stores that cross cache line boundaries.Timothy M. Jones
When each load or store is sent to the LSQ, we check whether it will cross a cache line boundary and, if so, split it in two. This creates two TLB translations and two memory requests. Care has to be taken if the first packet of a split load is sent but the second blocks the cache. Similarly, for a store, if the first packet cannot be sent, we must store the second one somewhere to retry later. This modifies the LSQSenderState class to record both packets in a split load or store. Finally, a new const variable, HasUnalignedMemAcc, is added to each ISA to indicate whether unaligned memory accesses are allowed. This is used throughout the changed code so that compiler can optimise away code dealing with split requests for ISAs that don't need them.
2010-02-12Power ISA: Add an alignment fault to Power ISA and check alignment in TLB.Timothy M. Jones
2009-10-30Syscalls: Make system calls access arguments like a stack, not an array.Gabe Black
When accessing arguments for a syscall, the position of an argument depends on the policies of the ISA, how much space preceding arguments took up, and the "alignment" of the index for this particular argument into the number of possible storate locations. This change adjusts getSyscallArg to take its index parameter by reference instead of value and to adjust it to point to the possible location of the next argument on the stack, basically just after the current one. This way, the rules for the new argument can be applied locally without knowing about other arguments since those have already been taken into account implicitly. All system calls have also been changed to reflect the new interface. In a number of cases this made the implementation clearer since it encourages arguments to be collected in one place in order and then used as necessary later, as opposed to scattering them throughout the function or using them in place in long expressions. It also discourages using getSyscallArg over and over to retrieve the same value when a temporary would do the job.
2009-10-27POWER: Add support for the Power ISATimothy M. Jones
This adds support for the 32-bit, big endian Power ISA. This supports both integer and floating point instructions based on the Power ISA Book I v2.06.