| Age | Commit message (Collapse) | Author |
|---|
|
Implement the Interrupts SimObject for RISC-V. This basically just
handles setting and getting the values of the interrupt-pending and
interrupt-enable CSRs according to the privileged ISA reference chapter
3.1.14. Note that it does NOT implement the PLIC as defined in chapter
7, as that is used for handling external interrupts which are defined
based on peripherals that are available.
Change-Id: Ia1321430f870ff5a3950217266fde0511332485b
Reviewed-on: https://gem5-review.googlesource.com/c/14377
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
RISC-V has a set of CSRs that contain information about a trap that was
taken into each privilegel level, such as illegal instruction bytes or
faulting address. This patch adds that register, modifies existing
faults to make use of it, and adds a new fault for future use with
handling page faults and bad addresses.
Change-Id: I3004bd7b907e7dc75e5f1a8452a1d74796a7a551
Reviewed-on: https://gem5-review.googlesource.com/11135
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
|
|
This patch updates the CSRs to match the RISC-V privileged specification
version 1.10. As interrupts, faults, and privilege levels are not yet
supported, there are no meaninful side effects that are implemented.
Performance counters are also not yet implemented, as they do not have
specifications. Currently they act as cycle counters.
Note that this implementation trusts software to use the registers
properly. Access protection, readability, and writeability of registers
based on privilege will come in a future patch.
Change-Id: I1de89bdbe369b5027911b2e6bc0425d3acaa708a
Reviewed-on: https://gem5-review.googlesource.com/7441
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This makes riscv compile with the version of clang(++) I have on my
workstation.
Change-Id: I0478616810fbc8a715fd61323b7e0f73676c8328
Reviewed-on: https://gem5-review.googlesource.com/7643
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch makes use of ImmOp's polymorphism to remove unnecessary
casting from the implementations of arithmetic instructions with
immediate operands and to remove the CUIOp format by combining it with
the CIOp format (compressed arithmetic instructions with immediate
operands). Interestingly, RISC-V specifies that instructions with
unsigned immediate operands still need to sign-extend the immediates
from 12 (or 20) bits to 64 bits, so that is left alone.
Change-Id: If20d70c1e90f379b9ed8a4155b2b9222b6defe16
Reviewed-on: https://gem5-review.googlesource.com/6401
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tuan Ta <qtt2@cornell.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
Replace manual creation of masks for sign extension of immediates with
the sext<N> function.
Change-Id: Ief2df91a25500c64f5bcae0dcd437c1e3bb95e6c
Reviewed-on: https://gem5-review.googlesource.com/6182
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch removes static portions of the standard instruction types
from the generated ISA code and puts them into arch/riscv/insts. Some
dynamically-generated content is left behind for each individual
instruction's implementation. Also, BranchOp is removed due to its
similarity with ImmOp and ImmOp and UImmOp are joined into a single
templated class, ImmOp<T>.
Change-Id: I1bf47c8b8a92a5be74a50909fcc51d8551185a2a
Reviewed-on: https://gem5-review.googlesource.com/6022
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.
Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.
Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.
Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch restructures the RISC-V ISA description to use fewer classes
and improve its ability to be extended with nonstandard extensions in
the future. It also cleans up the disassembly for some of the CSR and
system instructions by removing source and destination registers for
instructions that don't have any.
[Fix class UImmOp to have an "imm" member rather than "uimm".]
[Update disassembly generation for new RegId class.]
Change-Id: Iec1c782020126e5e8e73460b84e31c7b5a5971d9
Reviewed-on: https://gem5-review.googlesource.com/3800
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
