summaryrefslogtreecommitdiff
path: root/src/arch/riscv
AgeCommit message (Collapse)Author
2018-07-28arch-riscv: Add xret instructionsAlec Roelke
This patch adds the uret, sret, and mret instructions for use with returning from user-, supervisor-, and machine-level code, respectively. These instructions read the STATUS register to determine the previous privilege level and modify it to re-enable interrupts at the old privilege level. These instructions can only be executed at the corresponding privilege level or higher. Change-Id: I6125c31cb2fdcc3f83eca86910519e81ffbbbfc9 Reviewed-on: https://gem5-review.googlesource.com/11136 Maintainer: Alec Roelke <alec.roelke@gmail.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Robert Scheffel <robert.scheffel1@tu-dresden.de>
2018-07-28arch-riscv: Add support for trap value registerAlec Roelke
RISC-V has a set of CSRs that contain information about a trap that was taken into each privilegel level, such as illegal instruction bytes or faulting address. This patch adds that register, modifies existing faults to make use of it, and adds a new fault for future use with handling page faults and bad addresses. Change-Id: I3004bd7b907e7dc75e5f1a8452a1d74796a7a551 Reviewed-on: https://gem5-review.googlesource.com/11135 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <alec.roelke@gmail.com>
2018-07-28arch-riscv: Add support for fault handlingAlec Roelke
This patch adds support for handling RISC-V faults, including tracking current and previous execution privilege, correctly switching to the privilege mode specified by CSRs, and setting/storing the PC. It also includes changes introduced by patch #9821, which disables interrupts during handling of a fault. Change-Id: Ie9c0f29719620c20783540d3bdb2db44f6114fc9 Reviewed-on: https://gem5-review.googlesource.com/9161 Maintainer: Alec Roelke <ar4jc@virginia.edu> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2018-07-09arch-riscv: enable rudimentary fs simulationRobert
These changes enable a simple binary to be simulated in full system mode. Additionally, a new fault was implemented. It is executed once the CPU is initialized. This fault clears all interrupts and sets the pc to a reset vector. Change-Id: I50cfac91a61ba39a6ef3d38caca8794073887c88 Reviewed-on: https://gem5-review.googlesource.com/9061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-07-09arch-riscv: Fix the srlw and srliw instructions.Austin Harris
Change-Id: I14ccb0655819887db2306fee1188e1c83a991743 Signed-off-by: Austin Harris <austinharris@utexas.edu> Reviewed-on: https://gem5-review.googlesource.com/11669 Reviewed-by: Alec Roelke <alec.roelke@gmail.com> Maintainer: Alec Roelke <alec.roelke@gmail.com>
2018-06-11misc: Using smart pointers for memory RequestsGiacomo Travaglini
This patch is changing the underlying type for RequestPtr from Request* to shared_ptr<Request>. Having memory requests being managed by smart pointers will simplify the code; it will also prevent memory leakage and dangling pointers. Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/10996 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-06-11misc: Substitute pointer to Request with aliased RequestPtrGiacomo Travaglini
Every usage of Request* in the code has been replaced with the RequestPtr alias. This is a preparing patch for when RequestPtr will be the typdefed to a smart pointer to Request rather then a raw pointer to Request. Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/10995 Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-05-12arch-riscv: Update CSR implementationsAlec Roelke
This patch updates the CSRs to match the RISC-V privileged specification version 1.10. As interrupts, faults, and privilege levels are not yet supported, there are no meaninful side effects that are implemented. Performance counters are also not yet implemented, as they do not have specifications. Currently they act as cycle counters. Note that this implementation trusts software to use the registers properly. Access protection, readability, and writeability of registers based on privilege will come in a future patch. Change-Id: I1de89bdbe369b5027911b2e6bc0425d3acaa708a Reviewed-on: https://gem5-review.googlesource.com/7441 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-03-27arch: cpu: Make the ExtMachInst type a template argument in InstMap.Gabe Black
This doesn't completely hide the ISA specific ExtMachInst type inside the ISAs since it still gets applied in arch/generic, but it at least pulls it into the arch directory. Change-Id: Ic2188d59696530d7ecafdff0785d71867182701d Reviewed-on: https://gem5-review.googlesource.com/9403 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-26arch: Fix all override related warnings.Gabe Black
Clang has started(?) reporting override related warnings, something gcc apparently did before, but was disabled in the SConstruct. Rather than disable the warnings in for clang as well, this change fixes the warnings. A future change will re-enable the warnings for gcc. Change-Id: I3cc79e45749b2ae0f9bebb1acadc56a3d3a942da Reviewed-on: https://gem5-review.googlesource.com/9343 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-26arch: Add a virtual asBytes function to the StaticInst class.Gabe Black
This function takes a pointer to a buffer and the current size of the buffer as a pass by reference argument. If the size of the buffer is sufficient, the function stores a binary representation of itself (generally the ISA defined instruction encoding) in the buffer, and sets the size argument to how much space it used. This could be used by ISAs which have two instruction sizes (ARM and thumb, for example). If the buffer size isn't sufficient, then the size parameter should be set to what size is required, and then the function should return without modifying the buffer. The buffer itself should be aligned to the same standard as memory returned by new, specifically "The pointer returned shall be suitably aligned so that it can be converted to a pointer of any complete object type and then used to access the object or array in the storage allocated...". This will avoid having to memcpy buffers to avoid unaligned accesses. To standardize the representation of the data, it should be stored in the buffer as little endian. Since most hosts (including ARM and x86 hosts) will be little endian, this will almost always be a no-op. Change-Id: I2f31aa0b4f9c0126b44f47a881c2901243279bd6 Reviewed-on: https://gem5-review.googlesource.com/7562 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-20riscv: throw IllegalInstFault when decoding invalid instructionsTuan Ta
If an instruction is invalid, some assertions may in the decoder may fail the entire simulation. Instead, we want to raise an IllegalInstFault instead of failing immediately in the decoder if the invalid instruction is being speculatively executed. Change-Id: I5cb72ba06f07f173922f86897ddfdf677e8c702f Reviewed-on: https://gem5-review.googlesource.com/9261 Maintainer: Alec Roelke <ar4jc@virginia.edu> Reviewed-by: Monir Zaman <monir.zaman.m@gmail.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2018-02-19arch-riscv: Fix compressed branch op offsetAlec Roelke
There is a bug in RISC-V's compressed branch instructions where the offsets are not stored in ImmOp's immediate field, causing incorrect branchTarget() return values. This patch adds a new compressed branch op format, CBOp, which correctly stores the offset. Change-Id: Iac6e9b091d63f3dce4717ee5a9ec31a7cbd6c377 Reviewed-on: https://gem5-review.googlesource.com/8441 Reviewed-by: Tuan Ta <qtt2@cornell.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-29riscv: Add overrides to various StaticInst methods.Gabe Black
This makes riscv compile with the version of clang(++) I have on my workstation. Change-Id: I0478616810fbc8a715fd61323b7e0f73676c8328 Reviewed-on: https://gem5-review.googlesource.com/7643 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20arch, mem: Make the page table lookup function return a pointer.Gabe Black
This avoids having a copy in the lookup function itself, and the declaration of a lot of temporary TLB entry pointers in callers. The gpu TLB seems to have had the most dependence on the original signature of the lookup function, partially because it was relying on a somewhat unsafe copy to a TLB entry using a base class pointer type. Change-Id: I8b1cf494468163deee000002d243541657faf57f Reviewed-on: https://gem5-review.googlesource.com/7343 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20sim, arch, base: Refactor the base remote GDB class.Gabe Black
Fold the GDBListener class into the main BaseRemoteGDB class, move around a bunch of functions, convert a lot of internal functions to be private, move some functions into the .cc, make some functions non-virtual which didn't really need to be overridden. Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d Reviewed-on: https://gem5-review.googlesource.com/7422 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-19arch, mem, sim: Consolidate and rename the SE mode page table classes.Gabe Black
Now that Nothing inherits from PageTableBase directly, it can be merged into FuncPageTable. This change also takes the opportunity to rename the combined class to EmulationPageTable which lets you know that it's specifically for SE mode. Also remove the page table entry cache since it doesn't seem to actually improve performance. The TLBs likely absorb the majority of the locality, essentially acting like a cache like they would in real hardware. Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13 Reviewed-on: https://gem5-review.googlesource.com/7342 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-16arch-riscv: Fix floating-poing op classesAlec Roelke
This patch applies correct miscellaneous or multiply-accumulate op classes to floating point instructions which had previously been incorrectly classed as add or multiply instructions. Change-Id: I959dd8d3152aa341e0f060b003ce1da8c4d688fb Reviewed-on: https://gem5-review.googlesource.com/6521 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-16arch-riscv: Fix floating-point conversion bugsAlec Roelke
Using the fetestexcept function to check for specific types of floating point exceptions is unreliable for some kinds of floating-point-to-integer conversion operations. RISC-V code used to make use of them to check for some exceptional cases like overflow and underflow, which caused incorrect output when compiler optimization is turned on. This patch changes the use of fetestexcept to explicit checks for those exceptional cases. Change-Id: Id983906ea0664dc246e115a9e470d9ab7733bde1 Reviewed-on: https://gem5-review.googlesource.com/6402 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-15arch: Fix a fatal_if in most of the arch's process classes.Gabe Black
When switching an assert to a fatal while addressing recent review feedback, I forgot to reverse the polarity of the condition, making the fatal fire in exactly the opposite of the conditions it was meant to. Change-Id: Icf49864ef449052bbb0d427dca786006166575c4 Reviewed-on: https://gem5-review.googlesource.com/7381 Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-11arch-riscv: Don't crash when printing unknown CSRsAlec Roelke
This patch fixes a potential crash if an unnamed CSR is accessed and debug flags are enabled that print disassembly. Unknown CSRs will be identified as "??" followed by the address that was used. Change-Id: If5ac57f1422bd59c72a1a06206fa9d9dc05d21ef Reviewed-on: https://gem5-review.googlesource.com/7321 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-11arch,mem: Remove the default value for page size.Gabe Black
This breaks one more architecture dependence outside of the ISAs. Change-Id: I071f9ed73aef78e1cd1752247c183e30854b2d28 Reviewed-on: https://gem5-review.googlesource.com/6982 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-11arch,mem: Move page table construction into the arch classes.Gabe Black
This gets rid of an awkward NoArchPageTable class, and also gives the arch a place to inject ISA specific parameters (specifically page size) without having to have TheISA:: in the generic version of these types. Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441 Reviewed-on: https://gem5-review.googlesource.com/6981 Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-10arch-riscv: Make use of ImmOp's polymorphismAlec Roelke
This patch makes use of ImmOp's polymorphism to remove unnecessary casting from the implementations of arithmetic instructions with immediate operands and to remove the CUIOp format by combining it with the CIOp format (compressed arithmetic instructions with immediate operands). Interestingly, RISC-V specifies that instructions with unsigned immediate operands still need to sign-extend the immediates from 12 (or 20) bits to 64 bits, so that is left alone. Change-Id: If20d70c1e90f379b9ed8a4155b2b9222b6defe16 Reviewed-on: https://gem5-review.googlesource.com/6401 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tuan Ta <qtt2@cornell.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-10alpha,arm,mips,power,riscv,sparc,x86,cpu: Get rid of ISA_HAS_DELAY_SLOT.Gabe Black
This constant is, first, a #define, and second only used in one place. In that one place, it appears that the code it guards is no longer necessary in general. It was originally written to avoid refetching a block of data that you're still in, even if you've moved slightly farther in it because you're skipping the next instruction due to an annulled branch delay slot. In reality however, in SPARC, the one ISA I'm aware of which has this sort of branching behavior, the PC state object will correctly determine that no branch is happening in these cases. Code lower down in the loop will then recompute where fetching should continue based on the next PC, automatically skipping the annulled branch slot without misinterpretting the gap as a branch. This change therefore also removes this block of code. Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c Reviewed-on: https://gem5-review.googlesource.com/6821 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-05arch-riscv: Ignore sched_yield syscall in SE modeTuan Ta
Change-Id: I14f22c06eb8fdbe063980b4cd0a49387b9113a97 Reviewed-on: https://gem5-review.googlesource.com/6961 Maintainer: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
2018-01-05arch-riscv: Ignore set_robust_list and get_robust_list syscallsTuan Ta
Change-Id: I5a4744e5aed07337144af9f07978b83405b6695b Reviewed-on: https://gem5-review.googlesource.com/6902 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-05arch-riscv: Add an implementation of set_tid_address syscall in RISCVTuan Ta
Change-Id: Ida29ea6f6a9c3efe00aaebbfcb6b537fc62f6d06 Reviewed-on: https://gem5-review.googlesource.com/6901 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-05arch-riscv: Correct syscall argument reg countAlec Roelke
As per the discussion in patch #6904 and the Linux 4.15 kernel code for RISC-V, RISC-V has 7 system call argument registers, x10 through x16 (a0 through a6), with x17 (a7) being used for the system call number. Change-Id: I0080eca78ffa844b322bb2cff2a51ab2815f3809 Reviewed-on: https://gem5-review.googlesource.com/7081 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tuan Ta <qtt2@cornell.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-04arch-riscv: Remove "magic" syscall number constantAlec Roelke
getSyscallArg() in RISC-V has an explicit check to make sure that the register index is within the bounds of the system call register indices vector. This patch fixes it so that it uses SyscallArgumentRegs.size() rather than a "magic" constant that has to be updated every time SyscallArgumentRegs is changed. Change-Id: I2935d811177dc8028cb3df64b250ba997bc970d8 Reviewed-on: https://gem5-review.googlesource.com/7061 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-23alpha,arm,mips,power,riscv,sparc,x86: Get rid of TheISA::NoopMachInst.Gabe Black
It's no longer used. Change-Id: I4a71bcb214f1bb186b92ef50841eca635e6701c5 Reviewed-on: https://gem5-review.googlesource.com/6826 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-23riscv,x86: Stop using the arch Nop machine instruction unnecessarily.Gabe Black
That particular ExtMachInst is a convenient placeholder, but a value of 0 in RISCV or a static uninitialized ExtMachInst (which will therefore be all zeroes) on x86 works just as well, and removes the need for an ISA specific constant. Also, the idea of a universal Nop doesn't always make sense since it could be that what, exactly, doesn't do anything depends on context which would be lost on a constant value of an ExtMachInst. For instance, the value of an ExtMachInst that makes sense might depend on what mode the CPU was in, etc. Change-Id: I1f1a43a5c607a667e11b79bcf6e059e4f7141b3f Reviewed-on: https://gem5-review.googlesource.com/6825 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-22arch,cpu: "virtualize" the TLB interface.Gabe Black
CPUs have historically instantiated the architecture specific version of the TLBs to avoid a virtual function call, making them a little bit more dependent on what the current ISA is. Some simple performance measurement, the x86 twolf regression on the atomic CPU, shows that there isn't actually any performance benefit, and if anything the simulator goes slightly faster (although still within margin of error) when the TLB functions are virtual. This change switches everything outside of the architectures themselves to use the generic BaseTLB type, and then inside the ISA for them to cast that to their architecture specific type to call into architecture specific interfaces. The ARM TLB needed the most adjustment since it was using non-standard translation function signatures. Specifically, they all took an extra "type" parameter which defaulted to normal, and translateTiming returned a Fault. translateTiming actually doesn't need to return a Fault because everywhere that consumed it just stored it into a structure which it then deleted(?), and the fault is stored in the Translation object when the translation is done. A little more work is needed to fully obviate the arch/tlb.hh header, so the TheISA::TLB type is still visible outside of the ISAs. Specifically, the TlbEntry type is used in the generic PageTable which lives in src/mem. Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575 Reviewed-on: https://gem5-review.googlesource.com/6921 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-14arch-riscv: Define AT_RANDOM properlyAlec Roelke
According to the getauxval(3) man page, the AT_RANDOM aux value should be a pointer to 16 random bytes. In the initial implementation of RISC-V, this was based on spike's program stack setup, which copied the program header table there instead. This patch changes the implementation to use the proper 16 random bytes, making it compatible with some RISC-V programs that use custom linker scripts. Change-Id: Idaae7f19bf3ed3fd06d293e5e9c0b6f778270eb2 Reviewed-on: https://gem5-review.googlesource.com/6681 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-14arch-riscv: Increase maximum stack sizeAlec Roelke
This patch increases the maximum stack size of RISC-V, which should help to reduce problems with programs that allocate large amounts of data on the stack or do many small allocations. Change-Id: I1d760050229b12f01a4a8f24c047b587299fef6d Reviewed-on: https://gem5-review.googlesource.com/6661 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-13cpu,alpha,mips,power,riscv,sparc: Get rid of eaComp and memAccInst.Gabe Black
Neither of these were used, particularly memAccInst. Change-Id: I4ac9e44cf624e5de42519d586d7b699f08a2cdfc Reviewed-on: https://gem5-review.googlesource.com/6601 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-07arch-riscv: Move compressed ops out of ISAAlec Roelke
This patch moves static portions of the compressed instruction definitions out of the ISA generated code. Change-Id: I61daae8b8c03a9e0f012790a132aa4d34a6ec296 Reviewed-on: https://gem5-review.googlesource.com/6026 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-12-04misc: Rename misc.(hh|cc) to logging.(hh|cc)Gabe Black
These files aren't a collection of miscellaneous stuff, they're the definition of the Logger interface, and a few utility macros for calling into that interface (panic, warn, etc.). Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1 Reviewed-on: https://gem5-review.googlesource.com/6226 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-11-30arch-riscv: use sext rather than manual masksAlec Roelke
Replace manual creation of masks for sign extension of immediates with the sext<N> function. Change-Id: Ief2df91a25500c64f5bcae0dcd437c1e3bb95e6c Reviewed-on: https://gem5-review.googlesource.com/6182 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-30arch-riscv: Remove spaces around ea_codeAlec Roelke
This patch makes mem.isa conform to style guidelines better by removing spaces around the "ea_code" argument default value assignment of the Load format. Change-Id: I1c62b99de3617a3734b128b00fb421773e021317 Reviewed-on: https://gem5-review.googlesource.com/6181 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Add missing license paragraphsAlec Roelke
Some of the files in earlier patches rearranging instruction definitions were missing copyright and license information. This patch adds them. Change-Id: I2ac4910a415de6032fc0b7d4422904c682e0ad87 Reviewed-on: https://gem5-review.googlesource.com/6183 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2017-11-29arch-riscv: Remove static parts of AMOs out of ISAAlec Roelke
This patch removes the static parts of the RISC-V atomic memory instructions out of the ISA generated code and into arch/riscv/insts. It also makes the LR and SC instructions subclasses of MemInst from arch/riscv/insts/mem.hh. Change-Id: I6591f3d171045c4f1b457eb1264bbb7bd62b3e51 Reviewed-on: https://gem5-review.googlesource.com/6025 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move parts of mem insts out of ISAAlec Roelke
This patch moves static portions of the memory instructions out of the ISA generated code and puts them into arch/riscv/insts. It also simplifies the definitions of load and store instructions by giving them a common base class. Change-Id: Ic6930cbfc6bb02e4b3477521e57b093eac0c8803 Reviewed-on: https://gem5-review.googlesource.com/6024 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move unknown out of ISA descriptionAlec Roelke
This patch removes the Unknown instruction type out of the ISA generated code and puts it into arch/riscv/insts. Since there isn't any dynamic behavior to it, all that's left behind is a template for creating a new Unknown instruction. Change-Id: If7c3258a24ecadd3e00ab74586e1740e14f028db Reviewed-on: https://gem5-review.googlesource.com/6023 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-29arch-riscv: Move standard ops out of ISAAlec Roelke
This patch removes static portions of the standard instruction types from the generated ISA code and puts them into arch/riscv/insts. Some dynamically-generated content is left behind for each individual instruction's implementation. Also, BranchOp is removed due to its similarity with ImmOp and ImmOp and UImmOp are joined into a single templated class, ImmOp<T>. Change-Id: I1bf47c8b8a92a5be74a50909fcc51d8551185a2a Reviewed-on: https://gem5-review.googlesource.com/6022 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-28arch-riscv: Move static_inst into a directoryAlec Roelke
This patch creates an "insts" directory in src/arch/riscv to store static portions of instruction definitions that aren't part of the code generated by the ISA description. It serves as a starting point for future patches to simplify the ISA description. Change-Id: I6700522143f6fa6c9b18a30e1fbdc8f80cdc7afa Reviewed-on: https://gem5-review.googlesource.com/6021 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-22arch-riscv: Add missing system callsAlec Roelke
This patch adds all system calls present in riscv-gnu-toolchain at commit hash 65cb174. Many of them do not have implementations in gem5, so they are just placeholders. [Remove the variadic macro and replace it with a function that has default arguments because variadic macros may not be portable across compilers] [Remove spaces around default arguments of createSyscall for better style] [Switch from using a loose function to using SyscallDesc's new constructor] Change-Id: Iff97c689109121b39df423c72d0e79c6366e31b9 Reviewed-on: https://gem5-review.googlesource.com/5322 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2017-11-07alpha,arm,mips,power,riscv,sparc,x86: Merge exec decl templates.Gabe Black
In the ISA instruction definitions, some classes were declared with execute, etc., functions outside of the main template because they had CPU specific signatures and would need to be duplicated with each CPU plugged into them. Now that the instructions always just use an ExecContext, there's no reason for those templates to be separate. This change folds those templates together. Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa Reviewed-on: https://gem5-review.googlesource.com/5401 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-11-02alpha,arm,mips,power,riscv,sparc,x86,isa: De-specialize ExecContexts.Gabe Black
The ISA parser used to generate different copies of exec functions for each exec context class a particular CPU wanted to use. That's since been changed so that those functions take a pointer to the base ExecContext, so the code which would generate those extra functions can be removed, and some functions which used to be templated on an ExecContext subclass can be untemplated, or minimally less templated. Now that some functions aren't going to be instantiated multiple times with different signatures, there are also opportunities to collapse templates and make many instruction definitions simpler within the parser. Since those changes will be less mechanical, they're left for later changes and will probably be done in smaller increments. Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea Reviewed-on: https://gem5-review.googlesource.com/5381 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-10-17scons: Stop generating inc.d in the isa parser.Gabe Black
Generating dependency/build product information in the isa parser breaks scons idea of how a build is supposed to work. Arm twisting it into working forced a lot of false dependencies which slowed down the build. Change-Id: Iadee8c930fd7c80136d200d69870df7672a6b3ca Reviewed-on: https://gem5-review.googlesource.com/5081 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 22:18:38 +0000